PCN documents
Taping-Dimension-of-OP-CAP-Notice.pdf Lelon Electronics Corp. Lelon Electronics Corp. Lelon Electronics Corp. Lelon Electronics Corp. 147, Sec. 1, Guoguang Rd., Dali District, Taichung, Taiwan Tel: +886-4-2418-1856 Fax: +886-4-2418-1906 E-mail: service@lelon.com www.lelon.com Notice on the Modification of Taping Dimension of OP-CAP Capacitor Doc. No: TR-PCN1701 Date: 20 17/1/25 Revision: 1.0 Page: 1 Grade: General Dear Valued Customers: The H dimension of the taping specifications for ra dial type OP-CAP (Organic Conductive Polymer Capacitors) will be changed from Mar. 1 st, 2017. The details are listed below. Case size Old New 5 φ ×8L, 6.3 φ×5.5L, 6.3 φ×6L, 6.3 φ×6.5L, 6.3 φ×8L, 8φ ×6.5L, 8 φ×8L 17.5 mm 18.5 mm This modification doesn’t affect the existing part numbering system. Thank you for your continuous support of Lelon and our products. If you have any questions regarding this notice, pl ease contact with Lelon’s sales representative. Sincerely yours, Tyrone Huang Vice G. M. Lelon Electronics Corp. download now
PTN-NLR-003-2019Rev1.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355- 2143 U.S.A. Phone (610) 644- 1300 Fax (610) 296- 0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONEN T MKT010 - 06 Withdrawal of M,C,T series Curve 7 DESCRIPTION OF CHANGE: Vishay has the intention to withdraw all parts of M,C,T series curve 7 CLASSIFICATION OF CHANGE: Product Obsolescence REASON FOR CHANGE: Lack of market demand and the obsolescence of the ceramic raw material EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: Not applicable PROD UCT CATEGORY: Resistors, Non -Linear , Thermistors PART NUMBERS/SERIES/FAMILIES AFFECTED: 07B* 07C* 07M* 07T* 07W * C07* M07* T07* A3101P, A3084P, A3085P, A3086P, A3087P, A3121P VISHAY BRAND(s): Vishay Dale TIME SCHEDULE: Las t Time Buy Date: November 1 st 2019 Last Tim e Shipment Date: December 31 st 20 19 SAMPLE AVAILABILITY: Not applicable PRODUCT IDENTIFICATION: Not applicable… download now
PCN__2019-02__NTC_in_E1_module_types.pdf Product / Process Change Notification N° 2019 - 02 N° 201 9 - 02 Page 1 of 3 4.14F12c Dear Customer, Please find attached our IXYS Technology PCN _ 201 9-02: Important information for your attention: ◼ Please respond to this PCN by indicating your decision on the approval form, sign it and return to your sales partner before October 18th 201 9. ◼ IXYS aligns with the widely -recognized JEDEC STANDARD “JESD46“, which stipulates: “Lack of acknowledgement of the PCN within 30 days constitutes acceptance of the change.“ Your prompt reply will help IXYS to assure a smooth and well executed transition. If IXYS does not hear from your side by the due date, we will assume your full acceptance to this proposed change and its imple mentation. Your attention and response to this matter is greatly appreciated Disclaimer: If we do not receive any response by the date in the PCN above we consider this as the acceptance of the PCN. After the last order date as stated herein, purchase orders related… download now
PCN_TR-19071_G19-05343.pdf PCN - Product Change Notification No.: Date: Originator: Subject: Related product: Thank you very much for your kind understanding and cooperation. Those products can be identified by the product label: UL/CSA mark: Product using material made in Japan only UL mark: Product is using material made in China schedule: 2020 step by step TR-19071_G19-05343 27.09.2019 A. Schaffarczyk ZR header (SM2) CSA standard abolished S( )B-ZR-SM2-TF( ) (LF)(SN)( ) Reason of change: Due to manufacturer's circumstances, this change is carried out. Production for resin material used for this headers will be stopped in Japan. We are able to use the same resin material produced from the same manufacturer, but made in China. By using this material made in China our product will lose the CSA standard. UL standard remain unchanged. There is no effect on other products of the ZH / ZR series. The connector performance remain unchanged. Description of change: identification: FB_7.5.3.2.3.1JST Deutschland… download now
PCN_ESTA_001-2014_change_of_polyurethan_resin.pdf Product Change Notification Vishay Division ESTA - January 2014 - PCN-ESTA 001-2014 Rev. 0 Vishay Europe Sales GmbH Dr.-Felix-Zandman-Platz 1, D-95100 Selb, Germany, Phone (49) 9287 71-0, Fax (49) 9287 70435 Amtsgericht/County Court Hof HRB 2894, Geschäftsfüh rer/Managing Directors: Sieglinde Janker-Buecherl, Arnold Rohr, Werner Gebhardt www.vishay.com O N E O F T H E WO R L D S L A R G E S T M AN U F A C T U R E R S O F D I S C R E T E S E M I C O N D U CT O R S A N D P A S S I V E C O M P O N E N T Change of polyurethane resin for tubular Power Elec tronic Capacitors DESCRIPTION OF CHANGE: Change in polyurethane resin material used for fill ing Power Electronic Capacitors. (New: RTI = 130 °C ) REASON FOR CHANGE: Improve long term reliability EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANC E: Due to the higher RTI value long term reliability w ill be improved. PRODUCT CATEGORY: Power Electronics Capacitors (PEC) PART NUMBERS/SERIES/FAMILIES AFFECTED: HDMKP, GTO, GLI, KMKP, EMKP,… download now
PCN_ 2019-02_ NTC in E1 module types.pdf Product / Process Change Notification N° 2019 - 02 N° 201 9 - 02 Page 1 of 3 4.14F12c Dear Customer, Please find attached our IXYS Technology PCN _ 201 9-02: Important information for your attention: ◼ Please respond to this PCN by indicating your decision on the approval form, sign it and return to your sales partner before October 18th 201 9. ◼ IXYS aligns with the widely -recognized JEDEC STANDARD “JESD46“, which stipulates: “Lack of acknowledgement of the PCN within 30 days constitutes acceptance of the change.“ Your prompt reply will help IXYS to assure a smooth and well executed transition. If IXYS does not hear from your side by the due date, we will assume your full acceptance to this proposed change and its imple mentation. Your attention and response to this matter is greatly appreciated Disclaimer: If we do not receive any response by the date in the PCN above we consider this as the acceptance of the PCN. After the last order date as stated herein, purchase orders related… download now
PCN-SIL-007-2019-Rev1.pdf Product Group: Vishay Siliconix/ August 30, 2019/PCN SIL-0072019 Rev1 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # Vishay Siliconix Announces the Qualification New Green Mold Compound for Commercial High Voltage MOSFETs Built in TO-220 Packages DESCRIPTION OF CHANGE: As part of our continuous improvement program, Vishay Siliconix announces the qualification of SUMITOMO E590HT Green Mold Compound for TO-220 packages assembled in ASE Weihai, China (ASE) for Vishay’s High Voltage MOSFET (HVM) products. CLASSIFICATION OF CHANGE: Material set conversion REASON FOR CHANGE: Part of continuous improvement program . EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: Enhancement to long-term product reliability. No… download now
PCN-SIL-0052008_Rev1_JFET.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com O NE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Page 1 Product Group: Vishay Siliconix/March 17, 2008/PCN-SIL-0052008 Rev 1 Notification of Obsolescence of Vishay Siliconix Commercial JFET Products DESCRIPTION OF CHANGE: Over the past decade, Vishay Siliconix’ JFET product portfolio has seen declining demand as these parts reach the end of their lifecycle. At the same time, older wafer fabrication foundries have been closed as we moved to newer facilities. As a result, we have ce ased production on many commercial JFET die types and have depleted remaining die inventory in support of existing business. CLASSIFICATION OF CHANGE: Obsolescence REASON FOR CHANGE: Depletion of Die Inventory EXPECTED INFLUENCE ON QUALITY/ RELIABILITY/PERFORMANCE: NA PRODUCT CATEGORY: Commercial JFET Products… download now
PCN-OMV-1096-2019-Rev0.pdf Product Change Notification Product Group:Opto Modules & Visibles 26-SEP-2019 / PCN OMV-1096-2019 Rev. 0 TITLE: Change of production location for VLMU1610-365- 135 Vishay Optoelectronics Division is announcing that the manufacturing location for the UVA ChipLED VLMU1610-365-135 is changing. T he change involves a location change only. There is no change in the p rocess technology, or bill of material (BOM). DESCRIPTION OF CHANGE: Assembly Site CLASSIFICATION OF CHANGE : Consolidation of production and UV LED team resourc es in one assembly site in order to achieve better productivity and pr oduct supervision to support customers for the VLMU1610-365-135. REASON FOR CHANGE : These products will undergo a comprehensive qualifi cation and characterization program. There are no adverse effe cts on the quality of the product. The typical performance of the part will n ot change. EXPECTED INFLUENCE ON QUALITY RELIABILITY / PERFORMANCE: LEDs PRODUCT CATEGORY : PART NUMBERS / SERIES / FAMILIES… download now
PCN-DD-023-2019-Rev0.pdf Product Group: Diodes Division / September 20 , 2019 / PCN -DD -023 -2019 Rev. 0 1/3 Assembly Site Change for TMBS in TO -263 Wire Bond Package DESCRIPTION OF CHANGE : Vishay Diodes Division is moving the assembly location of TMBS ® (Trench MOS Barrier Schottky) rectifiers in wire bond TO -263 package from Vishay Tianjin factory , China to an existing subcontractor in Shandong, China. This existing subcontractor wa s already introduced before for non -TMBS products in TO -263 package through PCN -DD -001 -2018 . Qualification test has been confirmed to meet and pass all specifications for commercial grade. The datasheet spec. including package outline dimensions remain unchanged and the finish ed good appearance and reel packing variance a re shown in annex. There will be no change in form, fit or function of final products. CLASSIFICATION OF CHANGE: Assembly Site REASON FOR CHANGE: Manufacturing c apacity consolidation for future expansion . EXPECTED INFLUENCE ON… download now
PCN-CC-002-2018-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters: 63 Lancaster Avenue, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E OF TH E W OR LD ’S L AR GE S T M AN U F AC TU R E R S O F D IS C R E T E S E M IC ON D U C TOR S AN D P AS S IV E C OM P ON E N T S Product Group : Vis hay Ceramic Capacitors / October 01 , 201 9 Customer Notification Withdrawal of PCN -CC -002 -2018 Rev . 0 For technical reasons we have decided to withdraw the PCN -CC -002 -2018 Rev. 0 . All part numbers in above mentioned PCN keep the temperature characteristic T3M (N4700), as it is described in the catalogue . Please kindly consider above mentioned PCN as irrelevant. However, a s mentioned in the PCN, i n line with our commitment for co ntinuous improvement we will offer components build up with temperature characteristic S3L (N3300) with separate part number on request . ISSUED BY: Product Marketing Ceramic Capacitors Ralph Dietrich , Mgr. Product Marketing C eramic… download now
PCN-2019-02-NTCinE1modules.pdf Product / Process Change Notification N° 2019 - 02 N° 201 9 - 02 Page 1 of 3 4.14F12c Dear Customer, Please find attached our IXYS Technology PCN _ 201 9-02: Important information for your attention: ◼ Please respond to this PCN by indicating your decision on the approval form, sign it and return to your sales partner before October 18th 201 9. ◼ IXYS aligns with the widely -recognized JEDEC STANDARD “JESD46“, which stipulates: “Lack of acknowledgement of the PCN within 30 days constitutes acceptance of the change.“ Your prompt reply will help IXYS to assure a smooth and well executed transition. If IXYS does not hear from your side by the due date, we will assume your full acceptance to this proposed change and its imple mentation. Your attention and response to this matter is greatly appreciated Disclaimer: If we do not receive any response by the date in the PCN above we consider this as the acceptance of the PCN. After the last order date as stated herein, purchase orders related… download now
PCN-063_2019_1-OMTG1919101.pdf PCN-063_2019_1 -OMTG1919101 Page 1/5 Product Change Notification Geneva, 15 th Novem ber 2019 PCN-0 63_2019_ 1-OMT G1919101 Tolerances increasing on some mechanical dimensions HOxx-P- and HOxx-S- series Update of the picture on page 4 Based on the JEDEC JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on HOxx -P - and HOxx- S- series. Concerned products : HO 60- P-0100; HO 60- P/SP33-1106; HO 60- P/SP50 -0100; HO 100- P-0100; HO 100- P/SP33-1106; HO 120- P-0100; HO 120- P/SP33-1106; HO 120- P/SP50-0100; HO 150- P-0100; HO 180- P-0100; HO 180- P-1100; HO 180- P/SP33-1106; HO 240- P-0100; HO 240- P-0103; HO 250- P-0100; HO 250- P/SP606- 1106; HO 250- P/SP33-1106; HO 77- P/SPH00 -0100; HO 77.1- P/SPH00-0100; HO 93- P/SPH00-0100; HO 116- P/SPH00 -0100; HO… download now
PCN-063_2019_0-OMTG1919101.pdf PCN-063_2019_0- OMTG1919101 Page 1/5 Product Change Notification Geneva, 23 rd October 2019 PCN-0 63_2019_0-OMT G1919101 Tolerances increasing on some mechanical dimensions HOxx-P- and HOxx-S- series Based on the JEDEC JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on HOxx -P - and HOxx- S- series. Concerned products : HO 60- P-0100; HO 60- P/SP33-1106; HO 60- P/SP50 -0100; HO 100- P-0100; HO 100- P/SP33-1106; HO 120- P-0100; HO 120- P/SP33-1106; HO 120- P/SP50-0100; HO 150- P-0100; HO 180- P-0100; HO 180- P-1100; HO 180- P/SP33-1106; HO 240- P-0100; HO 240- P-0103; HO 250- P-0100; HO 250- P/SP606-1106; HO 250- P/SP33-1106; HO 77- P/SPH00 -0100; HO 77.1- P/SPH00-0100; HO 93- P/SPH00-0100; HO 116- P/SPH00 -0100; HO 125- P/SPH00 -0100; HO 154- P/SPH00… download now
PCN-043_2019_1-OMTxxx.pdf PCN -043_2019_ 1-OMT xxx Page 1/4 Product Change Notification Geneva , 17 th September 2019 PCN -0 43_2019_ 1-OMT xxx Packager supplier change for the SIL4 package of the ASIC HLSR, HASS, HFWS, HXS, HAIS, HAFS, HMS, 0165, 0173, 0187 series Qualification and test plans available Based on the JEDEC JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification s on HLSR, HASS, HFWS, HXS, HAIS, HAFS, HMS, 0165, 0173, 0187 series . Concerned series : HLSR, HASS, HFWS, HXS, HAIS, HAFS, HMS, 0165, 0173, 0187 series PCN -043_2019_ 1-OMT xxx Page 2/4 Change s: ➢ Description of the technical change s: Packager supplier change for the packaged SIL4 ASIC used inside the products. Design will be the same as before. The material used for the ASIC SIL 4 package from the new supplier… download now
Generic_Qual_Pack_for_PCN-DD-023-2019.pdf download now
Generic Qual Pack for PCN-DD-023-2019.pdf download now
Customer Notification_Withdrawal of PCN-CC-002-2018 Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters: 63 Lancaster Avenue, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E OF TH E W OR LD ’S L AR GE S T M AN U F AC TU R E R S O F D IS C R E T E S E M IC ON D U C TOR S AN D P AS S IV E C OM P ON E N T S Product Group : Vis hay Ceramic Capacitors / October 01 , 201 9 Customer Notification Withdrawal of PCN -CC -002 -2018 Rev . 0 For technical reasons we have decided to withdraw the PCN -CC -002 -2018 Rev. 0 . All part numbers in above mentioned PCN keep the temperature characteristic T3M (N4700), as it is described in the catalogue . Please kindly consider above mentioned PCN as irrelevant. However, a s mentioned in the PCN, i n line with our commitment for co ntinuous improvement we will offer components build up with temperature characteristic S3L (N3300) with separate part number on request . ISSUED BY: Product Marketing Ceramic Capacitors Ralph Dietrich , Mgr. Product Marketing C eramic… download now
blank-in-order-to-remove-PCN.pdf download now
Advisory Letter - TO-247AC Packing Tube Change at GEM.pdf Advisory Letter Product Group: Vishay Siliconix/ Sep 19, 2019 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # SUBJECT: Introduction of an improved packing tube design affecting products in packageTO-247AC at GEM Electronics, Hefei, China Dear Valued Customer: This advisory is being provided to you as an announcement that we will introduce an improved packing tube design for TO-247AC package assembly at GEM Electronics, Hefei, China. Please refer to 2 nd page of this advisory letter for affected parts list. The new tube design (option 2) will be implemented starting from mid of November 2019 onwards. Old tube design availability (option 1) will depend on distribution inventory status after mid of November 2019.… download now
AdvisoryLetter-TO-247AC.pdf Advisory Letter Product Group: Vishay Siliconix/ Sep 19, 2019 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # SUBJECT: Introduction of an improved packing tube design affecting products in packageTO-247AC at GEM Electronics, Hefei, China Dear Valued Customer: This advisory is being provided to you as an announcement that we will introduce an improved packing tube design for TO-247AC package assembly at GEM Electronics, Hefei, China. Please refer to 2 nd page of this advisory letter for affected parts list. The new tube design (option 2) will be implemented starting from mid of November 2019 onwards. Old tube design availability (option 1) will depend on distribution inventory status after mid of November 2019.… download now
20160809140145452.pdf download now
2024_PTN-TC-012-2024-Rev0.pdf Product Group: TC/Thu Oct 31, 2024/PTN-TC-012-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Discontinuation of TMC UA Case Size For further information, please contact your regional Vishay office. Description of Change: Vishay will discontinue production of the TMC UA Case Size molded capacitors. Reason for Change: Sales of the TMC UA Case has declined resulting in the need to reallocate capacity to other product lines. Expected Influence on Quality/Reliability/Performance: Not Applicable. Part Numbers/Series/Families Affected: TMCUA* Vishay Brand(S): Vishay Polytech Time Schedule: Last Time Buy Date: Wed May 28, 2025 Last Time Ship Date: Fri Nov 28, 2025 Sample Availability: Not Applicable. Product Identification: Not Applicable. Qualification Data: Not Applicable. This PTN is considered… download now
2024_PTN-TC-002-2024-REV-0.pdf Product Group: TC/Wed Feb 21, 2024/PTN-TC-002-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Discontinuation of EP1B and EP1C Ratings. For further information, please contact your regional Vishay office. Description of Change: Eliminating EP1 B and C cases ratings. Reason for Change: EP2 series product is easier to manufacture and has higher quality and reliability. Expected Influence on Quality/Reliability/Performance: Increased quality, reliability and performance of EP2 series product. Part Numbers/Series/Families Affected: EP1B*, EP1C*, Vishay Brand(S): Vishay Sprague Time Schedule: Last Time Buy Date: Wed Aug 21, 2024 Last Time Ship Date: Fri Feb 21, 2025 Sample Availability: Upon Request Product Identification: EP1B*, EP1C* Qualification Data: Upon Request This PTN is considered approved,… download now
2024_PTN-SIL-050-2024-Rev0.pdf Product Group: SIL/Tue Aug 13, 2024/PTN-SIL-050-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Product Obsolescence of Commercial Power MOSFETs from Tower 6" Foundry – LVM Phase-4 For further information, please contact your regional Vishay office. Description of Change: Vishay Siliconix announces the end of life of the commercial Low-Voltage Power MOSFET products due to the termination of 6-inch foundry site in Israel of Tower Semiconductor. Besides the previous phases below, this PTN is the phase-4 for Low-Voltage MOSFET (LVM) products. PTN-SIL-028-2024-REV-0, phase-1 PTN-SIL-037-2024-REV-0, phase-2 PTN-SIL-042-2024-REV-0, phase-3 Reason for Change: Termination of 6-inch foundry in Israel of Tower Semiconductor Expected Influence on Quality/Reliability/Performance: Product Obsolescence Part… download now
2024_PTN-SIL-042-2024-Rev0.pdf Product Group: SIL/Sun Jul 21, 2024/PTN-SIL-042-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Product Obsolescence of Commercial Power MOSFETs from Tower 6" Foundry – LVM Phase-3 For further information, please contact your regional Vishay office. Description of Change: Vishay Siliconix announces the end of life of the commercial Low-Voltage Power MOSFET products due to the termination of 6-inch foundry site in Israel of Tower Semiconductor. Besides PTN-SIL-028-2024-REV-0 as the phase-1 and PTN-SIL-037-2024 as the phase-2, this PTN is the phase-3 for Low-Voltage MOSFET (LVM) products. Reason for Change: Termination of 6-inch foundry in Israel of Tower Semiconductor Expected Influence on Quality/Reliability/Performance: Product Obsolescence Part Numbers/Series/Families Affected: Please see… download now
2024_PTN-SIL-040-2024-Rev0.pdf Product Group: SIL/Thu Jun 13, 2024/PTN-SIL-040-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Product Termination Notification - Select DPAK and D2PAK Part Numbers For further information, please contact your regional Vishay office. Description of Change: Due to the design trend towards smaller more advanced packages and a reduction in demand for some DPAK and D2PAK products, the part numbers listed in this notification will be terminated. Suggested replacement parts have been recommended in the table below. This is part of Vishay’s back-end strategy to focus investments and capacity expansion on the industry accepted PowerPAK® package families in favor of the legacy “TO” packages. Reason for Change: Low market demand – transition to advanced PowerPAK packages. Expected Influence on… download now
2024_PTN-SIL-038-2024-Rev0.pdf Product Group: SIL/Fri Jun 21, 2024/PTN-SIL-038-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Product Obsolescence of Commercial Power MOSFETs in PowerPAIR® 3x3 and PowerPAIR® 6x3.7 Package For further information, please contact your regional Vishay office. Description of Change: Vishay Siliconix announces the end of life of the commercial Low-Voltage Power MOSFET products in PowerPAIR® 3x3 and PowerPAIR® 6x3.7 Packages due to the legacy technology with slow demand. The part numbers be obsoleted will be replaced by the advanced products. Reason for Change: Migration of legacy products to advanced technology and package Expected Influence on Quality/Reliability/Performance: Product Obsolescence Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay… download now
2024_PTN-SIL-037-2024-Rev0.pdf Product Group: SIL/Fri Jun 21, 2024/PTN-SIL-037-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Product Obsolescence of Commercial Power MOSFETs from Tower 6" Foundry – LVM Phase-2 For further information, please contact your regional Vishay office. Description of Change: Vishay Siliconix announces the end of life of the commercial Low-Voltage Power MOSFET products due to the termination of 6-inch foundry site in Israel of Tower Semiconductor. Besides PTN-SIL-028-2024-REV-0 as the phase-1, this PTN is the phase-2 for Low-Voltage MOSFET (LVM) products. Reason for Change: Termination of 6-inch foundry in Israel of Tower Semiconductor Expected Influence on Quality/Reliability/Performance: Product Obsolescence Part Numbers/Series/Families Affected: Please see materials list on the succeeding page.… download now
2024_PTN-SIL-036-2024-REV-0.pdf Product Group: SIL/Mon Jun 3, 2024/PTN-SIL-036-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Conversion to Copper (Cu) Wire – SQ2319ADS For further information, please contact your regional Vishay office. Description of Change: The affected part number listed in this notification will be converted to a Copper wire material set. The new ordering code is SQ2319CES-T1_GE3, which has the exact same product performance and fit as SQ2319ADS. There will be no change to the wafer fab or assembly location. There will be no changes to the parameters on the datasheet (reference: SQ2319CES Doc # 62475 Rev. A). Reason for Change: Standardization of materials Expected Influence on Quality/Reliability/Performance: None Part Numbers/Series/Families Affected: SQ2319ADS-T1_GE3 Vishay Brand(S): Vishay Siliconix… download now
2024_PTN-SIL-035-2024-Rev0.pdf Product Group: SIL/Mon Jun 3, 2024/PTN-SIL-035-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Conversion to Copper (Cu) Wire – SQ2308CES For further information, please contact your regional Vishay office. Description of Change: The affected part number listed in this notification will be converted to a Copper wire material set. The new ordering code is SQ2308FES-T1_GE3 which has Identical silicon technology and silicon die design as SQ2308CES. Small changes to the data sheet AC parameters are a consequence of lot to lot variation and/or updated characterization methods (reference: SQ2308FES Doc # 62166 Rev. A). Device performance in the application will not be impacted. There will be no change to the wafer fab location. Reason for Change: Standardization of materials Expected Influence on… download now
2024_PTN-SIL-034-2024-Rev2.pdf Product Group: SIL/Fri Jun 7, 2024/PTN-SIL-034-2024-REV-2 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Conversion to Copper (Cu) Wire – SQ2337ES For further information, please contact your regional Vishay office. Description of Change: The affected part number listed in this notification will be converted to a Copper wire material set. The new ordering code is SQ2337CES-T1_GE3, which has the exact same product performance and fit as SQ2337ES. There will be no change to the wafer fab or assembly location. There will be no changes to the parameters on the datasheet (reference: SQ2337CES Doc # 62457 Rev. A). This PTN (Rev 2) was revised to correct the new ordering part number. Reason for Change: Standardization of materials Expected Influence on Quality/Reliability/Performance: None Part… download now
2024_PTN-SIL-033-2024-Rev0.pdf Product Group: SIL/Thu May 16, 2024/PTN-SIL-033-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Product Obsolescence of Commercial Power MOSFETs – Phase 3 For further information, please contact your regional Vishay office. Description of Change: Vishay Siliconix announces the end of life of commercial HVM Power MOSFET parts (low volume Gen 3) due to termination of 6-inch wafer foundry at Tower Semiconductor, Israel Reason for Change: Termination of 6-inch wafer foundry at Tower Semiconductor, Israel Expected Influence on Quality/Reliability/Performance: None Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Siliconix Time Schedule: Last Time Buy Date: Mon Nov 18, 2024 Last Time Ship Date: Sun May 18, 2025 Sample Availability: None… download now
2024_PTN-SIL-028-2024-Rev0.pdf Product Group: SIL/Thu May 2, 2024/PTN-SIL-028-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Product Obsolescence of Commercial Power MOSFETs from Tower 6" Foundry – Phase-1 For further information, please contact your regional Vishay office. Description of Change: Vishay Siliconix announces the end of life of the commercial Low-Voltage Power MOSFET products due to the termination of 6-inch foundry site in Israel of Tower Semiconductor. Reason for Change: Termination of 6-inch foundry in Israel of Tower Semiconductor Expected Influence on Quality/Reliability/Performance: Product Obsolescence Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Siliconix Time Schedule: Last Time Buy Date: Sun Nov 3, 2024 Last Time Ship Date: Sat May 3,… download now
2024_PTN-SIL-027-2024-Rev0.pdf Product Group: SIL/Thu May 2, 2024/PTN-SIL-027-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Product Obsolescence of Commercial Power MOSFETs – Phase 2 For further information, please contact your regional Vishay office. Description of Change: Vishay Siliconix announces the end of life of commercial HVM Power MOSFET parts (Gen 6 / 7 and low volume Gen 3) due to termination of 6-inch wafer foundry at Tower Semiconductor, Israel Reason for Change: Termination of 6-inch wafer foundry at Tower Semiconductor, Israel Expected Influence on Quality/Reliability/Performance: None Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Siliconix Time Schedule: Last Time Buy Date: Mon Nov 4, 2024 Last Time Ship Date: Sun May 4, 2025 Sample… download now
2024_PTN-SIL-022-2024-Rev0.pdf Product Group: SIL/Mon Mar 25, 2024/PTN-SIL-022-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Conversion to Copper (Cu) Wire – SQ2318AES For further information, please contact your regional Vishay office. Description of Change: The affected part number listed in this notification will be converted to a Copper wire material set. The new ordering code is SQ2318CES-T1_GE3 which has Identical silicon technology and silicon die design as SQ2318AES. Small changes to the data sheet AC parameters are a consequence of lot to lot variation and/or updated characterization methods (reference: SQ2318CES Doc # 62470 Rev.A). Device performance in the application will not be impacted. There will be no change to the wafer fab location. Reason for Change: Standardization of materials Expected Influence on… download now
2024_PTN-SIL-021-2024-Rev0.pdf Product Group: SIL/Mon Mar 25, 2024/PTN-SIL-021-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Conversion to Copper (Cu) Wire – SQ2362ES For further information, please contact your regional Vishay office. Description of Change: The affected part number listed in this notification will be converted to a Copper wire material set. The new ordering code is SQ2362CES-T1_GE3 which has Identical silicon technology and silicon die design as SQ2362ES. Small changes to the data sheet AC parameters are a consequence of lot to lot variation and/or updated characterization methods (reference: SQ2362CES Doc # 62424 Rev.A). Device performance in the application will not be impacted. There will be no change to the wafer fab location. Reason for Change: Standardization of materials Expected Influence on… download now
2024_PTN-SIL-020-2024-Rev0.pdf Product Group: SIL/Mon Mar 25, 2024/PTN-SIL-020-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Conversion to Copper (Cu) Wire – SQ2389ES For further information, please contact your regional Vishay office. Description of Change: The affected part number listed in this notification will be converted to a Copper wire material set. The new ordering code is SQ2389CES-T1_GE3 which has Identical silicon technology and silicon die design as SQ2389ES. Small changes to the data sheet AC parameters are a consequence of lot to lot variation and/or updated characterization methods (reference: SQ2389CES Doc # 62212 Rev.A). Device performance in the application will not be impacted. There will be no change to the wafer fab location. Reason for Change: Standardization of materials Expected Influence on… download now
2024_PTN-SIL-000406-2024-Rev0.pdf Product Group: SIL/Thu Jun 6, 2024/PTN-SIL-000406-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 End of Life Notification for Vishay Siliconix SIC780xx and SIC781CD For further information, please contact your regional Vishay office. Description of Change: Vishay Siliconix announces the end of life of SIC780xx and SIC781CD Reason for Change: Obsolescence of Mosfet Die Expected Influence on Quality/Reliability/Performance: N/A Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Siliconix Time Schedule: Last Time Buy Date: Fri Dec 6, 2024 Last Time Ship Date: Fri Jun 6, 2025 Sample Availability: SiC788CD-T1-GE3 and SIC788ACD-T1-GE3 are available immediately Product Identification: N/A Qualification Data: N/A This PTN is considered… download now
2024_PTN-SIL-000405-2024-Rev0.pdf Product Group: SIL/Thu Jun 13, 2024/PTN-SIL-000405-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 End of Life Notification for SIC40xx For further information, please contact your regional Vishay office. Description of Change: Vishay Siliconix announces the end of life of SIC40xx Reason for Change: Assembly material obsolescence Expected Influence on Quality/Reliability/Performance: N/A Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Siliconix Time Schedule: Last Time Buy Date: Fri Dec 13, 2024 Last Time Ship Date: Fri Jun 13, 2025 Sample Availability: N/A Product Identification: N/A Qualification Data: N/A This PTN is considered approved, without further notification, unless we receive specific customer concerns before Sat Jul 13,… download now
2024_PTN-SF-404-2024-Rev0.pdf Product Group: SF/Mon Apr 29, 2024/PTN-SF-404-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Discontinuation of Transformers and Inductors with lack of demand and high obsolescente risk For further information, please contact your regional Vishay office. Description of Change: Obsolescence. In conformance with our Product Life management procedure, and due to lack of customer demand, amplified by potential obsolescence risk on raw material, Sfernice Division is transferring old Transformers and Inductors to an End of Product Life status Reason for Change: obsolescence risk on raw material, lack of demand and increase of MOQ from our suppliers Expected Influence on Quality/Reliability/Performance: none Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay… download now
2024_PTN-SF-389-2024-Rev0.pdf Product Group: SF/Tue Mar 19, 2024/PTN-SF-389-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Product Discontinuation : All Heating products For further information, please contact your regional Vishay office. Description of Change: Stop Production of all Heating products Reason for Change: Unsustainable profitability level due to significant continuous decrease of purchased volumes and in parallel increase of the production costs due to equipment obsolescence and high raw material content Expected Influence on Quality/Reliability/Performance: Not Applicable Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay MCB Time Schedule: Last Time Buy Date: Fri Jun 28, 2024 Last Time Ship Date: Fri Dec 20, 2024 Sample Availability: Not Applicable… download now
2024_PTN-SF-370-2024-Rev0.pdf Product Group: SF/Thu Jan 25, 2024/PTN-SF-370-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Product Discontinuation : All Heating products for Faiveley Worldwide For further information, please contact your regional Vishay office. Description of Change: Stop Production of all Heating products Reason for Change: Unsustainable profitability level due to significant continuous decrease of purchased volumes and in parallel increase of the production costs due to equipment obsolescence and high raw material content Expected Influence on Quality/Reliability/Performance: Not Applicable Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay MCB Time Schedule: Last Time Buy Date: Tue Apr 30, 2024 Last Time Ship Date: Tue Dec 31, 2024 Sample… download now
2024_PTN-OPT-1341-2024-Rev0.pdf Product Group: OPT/Fri Jul 26, 2024/PTN-OPT-1341-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Product Discontinuation: TSHG6210, TSHG6210-ASZ, TSHG8200, TSHG8200-ASZ, TSHG8400, TSHG8400-ASZ, TSHG8400-MSZ For further information, please contact your regional Vishay office. Description of Change: TSHG6210, TSHG6210-ASZ, TSHG8200, TSHG8200-ASZ, TSHG8400, TSHG8400-ASZ, TSHG8400-MSZ will be discontinued. A list of recommended alternatives can be found in the attachment. Reason for Change: Discontinuation of LPE Technology. Expected Influence on Quality/Reliability/Performance: Since the recommended alternatives are not one to one equivalents,we expect a change in performance. So, we request the customers to test it in their application. Part Numbers/Series/Families Affected: Please see materials… download now
2024_PTN-OPT-1338-2024-Rev0.pdf Product Group: OPT/Thu Jul 4, 2024/PTN-OPT-1338-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Obsolescence of high speed optocoupler products with low sales For further information, please contact your regional Vishay office. Description of Change: The high speed optocouplers listed below are being discontinued. See also replacement parts proposal. Material PTN replacement proposal 6N135-X0076N135-X007T 6N135-X0176N135-X017T 6N136-X0076N136-X007T 6N136-X0096N136-X007T 6N136-X009T6N136-X007T 6N136-X019T6N136-X017T 6N139-X0096N139-X007T 6N139-X009T6N139-X007T 6N139-X019T6N139-X017T SFH6135SFH6136 SFH6136-X009TSFH6136-X017 SFH6136-X017SFH6136-X017T SFH6315T SFH6316T SFH6318T SFH6319T SFH6325-X009Tnone SFH6325-X017Tnone SFH6326-X001none SFH6326-X007none SFH6326-X007Tnone SFH6326-X009none… download now
2024_PTN-OPT-1337-2024-Rev1.pdf Product Group: OPT/Tue Aug 6, 2024/PTN-OPT-1337-2024-REV-1 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Product EOL VEMD5510C and VEMD5510CF For further information, please contact your regional Vishay office. Description of Change: Affected part numbers are announced for end of life; alternative product VEMD5520FX02 is under development, prototypes are available for customer evaluation Reason for Change: low demand Expected Influence on Quality/Reliability/Performance: no influence on quality/reliability/performance Part Numbers/Series/Families Affected: VEMD5510C, VEMD5510CF, VEMD5510CF-GS15, VEMD5510C-GS15, Vishay Brand(S): Vishay Semiconductors Time Schedule: Last Time Buy Date: Fri Feb 7, 2025 Last Time Ship Date: Thu Aug 28, 2025 Sample Availability: prototypes of the new product available upon… download now
2024_PTN-OPT-1313-2024-Rev0.pdf Product Group: OPT/Thu Feb 29, 2024/PTN-OPT-1313-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 End of life of Cast IR Receiver package with wide footprint For further information, please contact your regional Vishay office. Description of Change: The products reached the end of the product life cycle. We recommend to test the replacement parts in your application. Details can be found in the Fast Fact document. Reason for Change: End of life. Expected Influence on Quality/Reliability/Performance: None. Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Semiconductors Time Schedule: Last Time Buy Date: Sat Aug 31, 2024 Last Time Ship Date: Sat Dec 28, 2024 Sample Availability: Replacement parts are available as described in the Fast… download now
2024_PTN-NLR-006-2024-Rev2.pdf Product Group: NLR/Thu Aug 29, 2024/PTN-NLR-006-2024-REV-2 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Withdrawal of NTHS, M, C, T and A series (Production Location Juarez) For further information, please contact your regional Vishay office. Description of Change: In line with the objective of enhancing our production technologies and processes Vishay has the intention to withdraw NTHS, M, C, T and A series produced in Juarez plant. Some parts can still be crossed from the well known NTC BCc portfolio. Reason for Change: Consolidation of Technology and Production Locations. Expected Influence on Quality/Reliability/Performance: N/A Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Dale Time Schedule: Last Time Buy Date: Mon Mar 31, 2025 Last… download now
2024_PTN-NLR-006-2024-Rev0.pdf Product Group: NLR/Wed Aug 21, 2024/PTN-NLR-006-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Withdrawal of NTHS, M, C, T and A series (Production Location Juarez) For further information, please contact your regional Vishay office. Description of Change: In line with the objective of enhancing our production technologies and processes Vishay has the intention to withdraw NTHS, M, C, T and A series produced in Juarez plant. Some parts can still be crossed from the well known NTC BCc portfolio. Reason for Change: Consolidation of Technology and Production Locations Expected Influence on Quality/Reliability/Performance: N/A Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Dale Time Schedule: Last Time Buy Date: Mon Mar 31, 2025 Last… download now
2024_PTN-MLC-00001-2024-Rev0-VERSION-37475.pdf Product Group: MLC/Mon Feb 19, 2024/PTN-MLC-00001-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Obsolescence of VJ Series Chip Antennas from MLCC For further information, please contact your regional Vishay office. Description of Change: Obsolescence of VJ Series Chip Antennas Reason for Change: Vishay MLCC is streamlining production in order to continue to provide our customers, partners and end-users with world-class delivery and support. As part of this effort, the VJ Chip Antenna series products are being discontinued. Expected Influence on Quality/Reliability/Performance: Not Applicable Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Vitramon Time Schedule: Last Time Buy Date: Mon Sep 9, 2024 Last Time Ship Date: Sat Mar 8,… download now
2024_PTN-DR-00013-2024-Rev0-VERSION-46799.pdf Product Group: DR/Thu Jul 25, 2024/PTN-DR-00013-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 End Of Life for the Vishay NSR noise suppression components For further information, please contact your regional Vishay office. Description of Change: Termination of the Vishay NSR noise suppression components. Reason for Change: Exiting the business for NS (Noise suppression) components. Expected Influence on Quality/Reliability/Performance: No alternatives are offered for this termination of these components. Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Dale Time Schedule: Last Time Buy Date: Tue Jan 21, 2025 Last Time Ship Date: Sun Jul 20, 2025 Sample Availability: N/A Product Identification: N/A Qualification Data: N/A This PTN… download now
2024_PTN-DD-038-2023-Rev0.pdf Product Group: DD/Fri Dec 22, 2023/PTN-DD-038-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Discontinuation of PowerTab® Part Numbers For further information, please contact your regional Vishay office. Description of Change: Vishay Diodes Division is announcing the discontinuation of the existing part numbers in PowerTab® package. At the same time, the corresponding new Halogen Free part numbers are introduced to substitute the obsolete part numbers (see Annex 1 for detail of concerned part numbers). The Halogen Free compound is already used in some TO-220 and TO-247 packages production. Reason for Change: Supply Chain Security Expected Influence on Quality/Reliability/Performance: No influence on quality/reliability/performance for new replacement part number. Part Numbers/Series/Families… download now
2024_PTN-DD-034-2024-Rev0.pdf Product Group: DD/Fri Nov 8, 2024/PTN-DD-034-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Product Obsolescence For further information, please contact your regional Vishay office. Description of Change: Vishay Semiconductors announces the end of life of some part numbers Reason for Change: Low demand Expected Influence on Quality/Reliability/Performance: N/A Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Semiconductors,Vishay General Semiconductor Time Schedule: Last Time Buy Date: Thu May 8, 2025 Last Time Ship Date: Mon Nov 10, 2025 Sample Availability: N/A Product Identification: N/A Qualification Data: N/A This PTN is considered approved, without further notification, unless we receive specific customer concerns before Tue… download now
2024_PTN-DD-032-2024-Rev0.pdf Product Group: DD/Wed Oct 23, 2024/PTN-DD-032-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Product Obsolescence of GSOT ESD Protection Series in SOT-23 package For further information, please contact your regional Vishay office. Description of Change: Vishay Diodes Division will discontinue all part numbers of the GSOT ESD Protection Series. Reason for Change: Portfolio Consolidation with direct drop-in replacement of the VGSOT series. Expected Influence on Quality/Reliability/Performance: N/A Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Semiconductors Time Schedule: Last Time Buy Date: Wed Apr 23, 2025 Last Time Ship Date: Thu Oct 23, 2025 Sample Availability: N/A Product Identification: N/A Qualification Data: N/A This PTN… download now
2024_PTN-DD-011-2024-Rev0.pdf Product Group: DD/Wed Apr 24, 2024/PTN-DD-011-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Product Obsolescence For further information, please contact your regional Vishay office. Description of Change: Vishay Semiconductors announces the end of life of some Die & Wafer part numbers Reason for Change: Low demand Expected Influence on Quality/Reliability/Performance: N/A Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Semiconductors Time Schedule: Last Time Buy Date: Thu Oct 24, 2024 Last Time Ship Date: Thu Apr 24, 2025 Sample Availability: N/A Product Identification: N/A Qualification Data: N/A This PTN is considered approved, without further notification, unless we receive specific customer concerns before Mon Jun 24, 2024 or… download now
2024_PTN-DD-009-2024-Rev0.pdf Product Group: DD/Mon Apr 8, 2024/PTN-DD-009-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Product Obsolescence For further information, please contact your regional Vishay office. Description of Change: Vishay Semiconductors announces the discontinuation of some part numbers due to low business volumes. Reason for Change: Low production volumes Expected Influence on Quality/Reliability/Performance: N/A Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Semiconductors Time Schedule: Last Time Buy Date: Tue Oct 8, 2024 Last Time Ship Date: Tue Apr 8, 2025 Sample Availability: N/A Product Identification: N/A Qualification Data: N/A This PTN is considered approved, without further notification, unless we receive specific customer… download now
2024_PTN-DD-008-2024-Rev0.pdf Product Group: DD/Mon Apr 8, 2024/PTN-DD-008-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Product Discontinuation Notice of Ultrafast Rectifier Products For further information, please contact your regional Vishay office. Description of Change: Vishay Diodes Division is announcing the discontinuation of some Ultrafast product with low sales volume. Please refer to Annex 1 for affected part numbers and the alternative solutions. Reason for Change: Product portfolio harmonization Expected Influence on Quality/Reliability/Performance: N/A Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay General Semiconductor Time Schedule: Last Time Buy Date: Tue Oct 8, 2024 Last Time Ship Date: Tue Apr 8, 2025 Sample Availability: N/A Product… download now
2024_PTN-DD-007-2024-Rev0.pdf Product Group: DD/Thu Mar 21, 2024/PTN-DD-007-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Product Obsolescence For further information, please contact your regional Vishay office. Description of Change: Vishay Semicondutors announces the discontinuation of some ESD & Small signals part numbers. See Annex 1 for details on available replacements. Reason for Change: Low / No sales, Portfolio Consolidation Expected Influence on Quality/Reliability/Performance: N/A Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Semiconductors Time Schedule: Last Time Buy Date: Mon Sep 23, 2024 Last Time Ship Date: Mon Mar 24, 2025 Sample Availability: N/A Product Identification: N/A Qualification Data: N/A This PTN is considered approved, without… download now
2024_PTN-DBR-00027-2024-Rev0.pdf Product Group: DBR/Thu Aug 29, 2024/PTN-DBR-00027-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Discontinuation of below ohmic ranges of SFR16S, SFR25, and SFR25H. 1) SFR16S: <10 Ohm in ±5%, <100 Ohm in ±1% 2) SFR25 and SFR25H: <1 Ohm in ±5%, <10 Ohm and >1M Ohm in ±1% For further information, please contact your regional Vishay office. Description of Change: 1) SFR16S series: Ohmic values less than 10 Ohm in ±5% tolerance, less than 100 Ohm in ± 1% tolerance will be discontinued. 2) SFR25 and SFR25H series: Ohmic values less than 1 Ohm in ±5% tolerance, less than 10 Ohm in ± 1%, and ohmic values greater than 1 M Ohm in ±1% tolerance will be discontinued. Customers can choose equivalent MBA/SMA 0204 and MBB/SMA 0207 series metal film resistors part numbers as drop-in replacement as shown in… download now
2024_PTN-DBR-00018-2024-Rev0.pdf Product Group: DBR/Tue Jul 16, 2024/PTN-DBR-00018-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Discontinuation of VR68 series High Ohmic / High Voltage Metal Glaze Leaded Resistors with ± 1% tolerance for ohmic range 10 MOhm to 68 MOhm For further information, please contact your regional Vishay office. Description of Change: VR68 series High Ohmic / High Voltage Metal Glaze Leaded Resistors in the ohmic value range 10 MOhm to 68 MOhm with ±1% tolerance will be discontinued. However, this range will still remain available in ±5% tolerance in E24 series ohmic values. The resistance range from 100 kOhm to 9.1 MOhm will continue to be available with ±1% tolerance. Reason for Change: Unavailability of raw materials Expected Influence on Quality/Reliability/Performance: N/A Part… download now
2024_PTN-CC-00025-2024-Rev0.pdf Product Group: CC/Mon May 27, 2024/PTN-CC-00025-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Obsolescence of some termination alternatives of Draloric T. 020030, T. 020050, T. 020080, T. 030090, T. 045090, T. 045120, T. 045150 series For further information, please contact your regional Vishay office. Description of Change: By submitting this notice Vishay is announcing that the products listed herein have reached their end of life and will be withdrawn from the market. Reason for Change: The low demand for these products in the market has rendered these parts unfeasible to continue to support. Expected Influence on Quality/Reliability/Performance: N/A Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Draloric Time Schedule: Last… download now
2024_PTN-CC-00021-2024-Rev0.pdf Product Group: CC/Fri May 24, 2024/PTN-CC-00021-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Obsolescence of Draloric DF 030070, DF 030090, DF 030110 series For further information, please contact your regional Vishay office. Description of Change: By submitting this notice Vishay is announcing that the products listed herein have reached their end of life and will be withdrawn from the market. Reason for Change: The low demand for these products in the market has rendered these parts unfeasible to continue to support. Expected Influence on Quality/Reliability/Performance: N/A Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Draloric Time Schedule: Last Time Buy Date: Sun Nov 24, 2024 Last Time Ship Date: Fri May 23, 2025 Sample… download now
2024_PTN-CC-00020-2024-Rev0.pdf Product Group: CC/Fri May 24, 2024/PTN-CC-00020-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Obsolescence of Draloric DF 016030, DF 016040, DF 016060 series For further information, please contact your regional Vishay office. Description of Change: By submitting this notice Vishay is announcing that the products listed herein have reached their end of life and will be withdrawn from the market. Reason for Change: The low demand for these products in the market has rendered these parts unfeasible to continue to support. Expected Influence on Quality/Reliability/Performance: N/A Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Draloric Time Schedule: Last Time Buy Date: Sun Nov 24, 2024 Last Time Ship Date: Fri May 23, 2025 Sample… download now
2024_PTN-AC-00506-2024-Rev0.pdf Product Group: AC/Wed Aug 28, 2024/PTN-AC-00506-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Discontinuance of Vishay OS-CON SMD series 94 SVP & 94 SVPD. For further information, please contact your regional Vishay office. Description of Change: Discontinuance of Vishay OS-CON series 94 SVP & 94 SVPD. Available alternatives can be found in replacement table below. Any PN within these series, whether listed or not, will also be affected. Reason for Change: Poor availability of key raw materials and low market demand. Expected Influence on Quality/Reliability/Performance: N/A Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay OS-CON Time Schedule: Last Time Buy Date: Mon Jun 30, 2025 Last Time Ship Date: Wed Dec 31, 2025 Sample… download now
2024_PTN-AC-00505-2024-Rev0.pdf Product Group: AC/Fri Aug 30, 2024/PTN-AC-00505-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Discontinuance of Vishay BCcomponents SMD series 139 CLL. For further information, please contact your regional Vishay office. Description of Change: Discontinuance of Vishay BCcomponents series 139 CLL. There are no available alternatives for series 139CLL. Any PN within these series, whether listed or not, will also be affected. Reason for Change: Poor availability of key raw materials and low market demand. Expected Influence on Quality/Reliability/Performance: N/A Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay BCcomponents Time Schedule: Last Time Buy Date: Tue Sep 30, 2025 Last Time Ship Date: Wed Dec 31, 2025 Sample Availability:… download now
2024_PTN-AC-00504-2024-Rev0.pdf Product Group: AC/Tue Apr 30, 2024/PTN-AC-00504-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Partially discontinuance of series 196 DLC For further information, please contact your regional Vishay office. Description of Change: Termination of Standard Series of series 196 DLC Reason for Change: Poor availability and and long lead time of key raw materials. Expected Influence on Quality/Reliability/Performance: N/A Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay BCcomponents Time Schedule: Last Time Buy Date: Fri Nov 22, 2024 Last Time Ship Date: Fri Aug 8, 2025 Sample Availability: - Product Identification: - Qualification Data: - This PTN is considered approved, without further notification, unless we receive specific customer… download now
2024_PTN-AC-00503-2024-Rev0.pdf Product Group: AC/Tue Apr 30, 2024/PTN-AC-00503-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Vishay BCcomponents Aluminum Capacitors Discontinuance of SMD 153 CLV and partially discontinuance of 153 CRV Series For further information, please contact your regional Vishay office. Description of Change: Termination of Vishay BCcomponents series 153 CLV and temination of series 153 CRV except case size 10x14. During phase out time sleeve material and markings may change. Available alternatives can be found in replacement table below. Reason for Change: Poor availability of key raw materials. Expected Influence on Quality/Reliability/Performance: N/A Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay BCcomponents Time Schedule: Last Time… download now
2024_PIN-TC-017-2024-Rev0.pdf Product Group: TC/Wed Nov 20, 2024/PIN-TC-017-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Information Notification: Primary packing unit 2D labels update For further information, please contact your regional Vishay office. Description of Change: Format of primary packing unit 2D labels will be updated. Vishay reserves the right to use both labels' styles. Reason for Change: Conversion to another software. Printing quality improvement. Expected Influence on Quality/Reliability/Performance: There is no influence on quality and reliability. Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Sprague Time Schedule: Start Shipment Date: Fri Dec 20, 2024 Sample Availability: N/A Product Identification: See attachment for current and… download now
2024_PIN-TC-016-2024-Rev0.pdf Product Group: TC/Wed Nov 20, 2024/PIN-TC-016-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Information Notification: Primary packing unit 2D labels update For further information, please contact your regional Vishay office. Description of Change: Format of primary packing unit 2D labels will be updated. Vishay reserves the right to use both labels' styles. Reason for Change: Conversion to another software. Printing quality improvement. Expected Influence on Quality/Reliability/Performance: There is no influence on quality and reliability. Part Numbers/Series/Families Affected: 194D*, CWR06*, CWR16*, CWR26*, Vishay Brand(S): Vishay Sprague Time Schedule: Start Shipment Date: Fri Dec 20, 2024 Sample Availability: N/A Product Identification: See attachment for current and updated label's view.… download now
2024_PIN-TC-015-2024-Rev0.pdf Product Group: TC/Tue Nov 12, 2024/PIN-TC-015-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Information Notification: Primary packing unit 2D labels update For further information, please contact your regional Vishay office. Description of Change: Format of primary packing unit 2D labels will be updated. Vishay reserves the right to use both labels' styles. Reason for Change: Conversion to another software. Printing quality improvement. Expected Influence on Quality/Reliability/Performance: There is no influence on quality and reliability. Part Numbers/Series/Families Affected: T52*, T54*, T58*, T59*, Vishay Brand(S): Vishay Time Schedule: Start Shipment Date: Thu Dec 12, 2024 Sample Availability: N/A Product Identification: See attachment for current and updated label's view. Qualification… download now
2024_PIN-TC-013-2024-Rev0.pdf Product Group: TC/Tue Nov 12, 2024/PIN-TC-013-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Information Notification: Primary packing unit 2D labels update For further information, please contact your regional Vishay office. Description of Change: Format of primary packing unit 2D labels will be updated. Vishay reserves the right to use both labels' styles. Reason for Change: Conversion to another software. Printing quality improvement. Expected Influence on Quality/Reliability/Performance: There is no influence on quality and reliability. Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Time Schedule: Start Shipment Date: Thu Dec 12, 2024 Sample Availability: N/A Product Identification: See attachment for current and updated… download now
2024_PIN-TC-010-2024-Rev0.pdf Product Group: TC/Mon Sep 30, 2024/PIN-TC-010-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Information Notification: Primary packing unit 2D labels update For further information, please contact your regional Vishay office. Description of Change: Format of primary packing unit 2D labels will be updated. Vishay reserves the right to use both labels styles. Reason for Change: Conversion to another software. Printing quality improvement. Expected Influence on Quality/Reliability/Performance: There is no influence on quality and reliability. Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Sprague Time Schedule: Start Shipment Date: Wed Oct 30, 2024 Sample Availability: N/A Product Identification: See attachment for current and… download now
2024_PIN-TC-010-2024-Rev-1.pdf Product Group: TC/Tue Oct 15, 2024/PIN-TC-010-2024-REV-1 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Information Notification: Primary packing unit 2D labels update For further information, please contact your regional Vishay office. Description of Change: Format of primary packing unit 2D labels will be updated. Vishay reserves the right to use both labels styles. Reason for Change: Conversion to another software. Printing quality improvement. Expected Influence on Quality/Reliability/Performance: There is no influence on quality and reliability. Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Sprague Time Schedule: Start Shipment Date: Thu Nov 14, 2024 Sample Availability: N/A Product Identification: See attachment for current and… download now
2024_PIN-TC-009-2024-Rev0.pdf Product Group: TC/Mon Sep 30, 2024/PIN-TC-009-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Information Notification: Primary packing unit 2D labels update For further information, please contact your regional Vishay office. Description of Change: Format of primary packing unit 2D labels will be updated. Vishay reserves the right to use both labels styles. Reason for Change: Conversion to another software. Printing quality improvement. Expected Influence on Quality/Reliability/Performance: There is no influence on quality and reliability. Part Numbers/Series/Families Affected: 735D*, 735DE*, CT79*, Vishay Brand(S): Vishay Sprague Time Schedule: Start Shipment Date: Wed Oct 30, 2024 Sample Availability: N/A Product Identification: See attachment for current and updated label's view.… download now
2024_PIN-TC-007-2024-Rev0.pdf Product Group: TC/Tue Oct 29, 2024/PIN-TC-007-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Information Notification: Primary packing unit 2D labels update For further information, please contact your regional Vishay office. Description of Change: Format of primary packing unit 2D labels will be updated. Vishay reserves the right to use both labels styles. Reason for Change: Conversion to another software. Printing quality improvement. Expected Influence on Quality/Reliability/Performance: There is no influence on quality and reliability. Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Sprague Time Schedule: Start Shipment Date: Thu Nov 28, 2024 Sample Availability: N/A Product Identification: See attachment for current and… download now
2024_PIN-TC-006-2024-Rev1.pdf Product Group: TC/Wed Sep 25, 2024/PIN-TC-006-2024-REV-1 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Anode backfill epoxy color change For further information, please contact your regional Vishay office. Description of Change: Anode backfill pink epoxy color will be changed to beige. Reason for Change: Supplier of anode backfill material will stop production of pink epoxy and will supply beige epoxy only. This is the same material but with different pigment. Vishay reserves the right to supply capacitors with both colors. Expected Influence on Quality/Reliability/Performance: No influence. Part Numbers/Series/Families Affected: 194D* Vishay Brand(S): Vishay Sprague Time Schedule: Start Shipment Date: Mon Sep 30, 2024 Sample Availability: Upon Request. Product Identification: Per visual appearance.… download now
2024_PIN-TC-005-2024-Rev1.pdf EHS Q | 23.02.2023 | PCN_Withdrawn.docx | Revision: 1 Seite 1 von 1 Alle Kopien (elektronisch oder gedruckt) gelten als nicht kontrolliert. Anwender müssen die Aktualität in der Online -Dokumentation überprüfen. NUR FÜR DEN INTERNEN GEBRAUCH All copies (electronic or printed) are considered uncontrolled. Users must check t he relevance in the online documentation. FOR INTERNAL USE ONLY This PCN revision has been withdrawn by the manufacturer. As soon as a new version of this PCN is available, it will be updated. download now
2024_PIN-TC-005-2024-Rev0.pdf Product Group: TC/Thu Jul 25, 2024/PIN-TC-005-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Information Notification: Primary packing unit 2D labels update. For further information, please contact your regional Vishay office. Description of Change: Format of primary packing unit 2D labels will be updated. Vishay reserves the right to use both label styles. Reason for Change: Conversion to another software. Printing quality improvement. Expected Influence on Quality/Reliability/Performance: There is no influence on quality and reliability. Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Sprague Time Schedule: Start Shipment Date: Mon Sep 16, 2024 Sample Availability: N/A Product Identification: See attachment for current and… download now
2024_PIN-TC-005-2024-Rev-2.pdf Product Group: TC/Mon Oct 14, 2024/PIN-TC-005-2024-REV-2 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Information Notification: Primary packing unit 2D labels update For further information, please contact your regional Vishay office. Description of Change: Format of primary packing unit 2D labels will be updated. Vishay reserves the right to use both labels styles. Reason for Change: There is no influence on quality and reliability. Expected Influence on Quality/Reliability/Performance: Conversion to another software. Printing quality improvement. Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Sprague Time Schedule: Start Shipment Date: Wed Nov 13, 2024 Sample Availability: N/A Product Identification: See attachment for current and… download now
2024_PIN-TC-003-2024-Rev1.pdf Product Group: TC/Thu Sep 26, 2024/PIN-TC-003-2024-REV-1 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Information Notification: Primary packing unit 2D labels update For further information, please contact your regional Vishay office. Description of Change: Format of primary packing unit 2D labels will be updated. Vishay reserves the right to use both labels style. Reason for Change: Conversion to another software. Printing quality improvement. Expected Influence on Quality/Reliability/Performance: There is no influence on quality and reliability. Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Sprague Time Schedule: Start Shipment Date: Mon Sep 30, 2024 Sample Availability: N/A Product Identification: See attachment for current and updated… download now
2024_PIN-TC-003-2024-Rev0.pdf Product Group: TC/Wed Jul 3, 2024/PIN-TC-003-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Information Notification: Primary packing unit 2D labels update. For further information, please contact your regional Vishay office. Description of Change: Format of primary packing unit 2D labels will be updated. Vishay reserves the right to use both labels styles. Reason for Change: Conversion to another software. Printing quality improvement. Expected Influence on Quality/Reliability/Performance: There is no influence on quality and reliability. Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Sprague Time Schedule: Start Shipment Date: Sun Aug 4, 2024 Sample Availability: N/A Product Identification: See attachment for current and updated… download now
2024_PIN-SIL-057-2024-Rev0.pdf Product Group: SIL/Fri Nov 1, 2024/PIN-SIL-057-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Datasheet Revision with Spirito SOA for Commercial MOSFETs (Phase-04) For further information, please contact your regional Vishay office. Description of Change: As part of Vishay Siliconix commitment to quality, we would like to extend to you a courtesy advisory notification of the datasheet revision with Spirito SOA (Safe Operating Area) for the commercial MOSFET products, including SIJA22DP, SIR510DP, SIR5607DP, SIR870ADP, and SIR872ADP. There is no change to the materials used in the manufacture of this part. We hope you find this Datasheet Update Advisory helpful. This Advisory is for information only and there is no need for a response. Reason for Change: Datasheet Revision Expected Influence on… download now
2024_PIN-SIL-032-2024-Rev0.pdf Product Group: SIL/Fri Aug 9, 2024/PIN-SIL-032-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Datasheet Revision with Spirito SOA for Commercial MOSFETs (Phase-03) For further information, please contact your regional Vishay office. Description of Change: As part of Vishay Siliconix commitment to quality, we would like to extend to you a courtesy advisory notification of the datasheet revision with Spirito SOA (Safe Operating Area) for the commercial MOSFET products, including SIJH112E, SIR570DP, SIRS4400DP, SIS126DN, and SISS30ADN. There is no change to the materials used in the manufacture of this part. We hope you find this Datasheet Update Advisory helpful. This Advisory is for information only and there is no need for a response. Reason for Change: Datasheet Revision Expected Influence on… download now
2024_PIN-SIL-026-2024-Rev0.pdf Product Group: SIL/Wed Apr 10, 2024/PIN-SIL-026-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Revision in SQ2351ES Datasheet from Rev. E to Rev. F For further information, please contact your regional Vishay office. Description of Change: As part of Vishay Siliconix commitment to Quality, we would like to extend to you a courtesy advisory notification of a datasheet revision for SQ2351ES (Doc #66716 Rev F attached). There is no change to the materials or processes used in the manufacture of this part. The changes per this Advisory reflect updates as follows: Minimum specification for Rg change from 4.8 Ohms to 2.8 Ohms This notification is for information only and there is no need for a response. Reason for Change: Datasheet Revision Expected Influence on Quality/Reliability/Performance: None… download now
2024_PIN-SIL-025-2024-Rev0.pdf Product Group: SIL/Wed Apr 10, 2024/PIN-SIL-025-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Revision in SQ2303ES Datasheet from Rev. C to Rev. D For further information, please contact your regional Vishay office. Description of Change: As part of Vishay Siliconix commitment to Quality, we would like to extend to you a courtesy advisory notification of a datasheet revision for SQ2303ES (Doc #67023 Rev D attached). There is no change to the materials or processes used in the manufacture of this part. The changes per this Advisory reflect updates as follows: Minimum specification for Rg change from 6.04 Ohms to 2.8 Ohms This notification is for information only and there is no need for a response. Reason for Change: Datasheet Revision Expected Influence on Quality/Reliability/Performance: None… download now
2024_PIN-SIL-024-2024-Rev0.pdf download now
2024_PIN-SIL-004-2024-Rev1.pdf Product Group: SIL/Fri Jan 26, 2024/PIN-SIL-004-2024-REV-1 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Revision in SQJ469EP Datasheet from Rev. C to Rev. D For further information, please contact your regional Vishay office. Description of Change: As part of Vishay Siliconix commitment to Quality, we would like to extend to you a courtesy advisory notification of a datasheet revision for SQJ469EP (Doc #65936 Rev D attached). There is no change to the materials or processes used in the manufacture of this part. The changes per this Advisory reflect updates as follows: Removed the following: superscript “d” from AEC-Q101 Qualified feature, superscript “b” from Maximum Power Dissipation rating, and “d. Parametric verification ongoing” note. Renamed: superscript “e, f” to “d, e” of Soldering Recommendations… download now
2024_PIN-SIL-004-2024-Rev0.pdf Product Group: SIL/Fri Jan 19, 2024/PIN-SIL-004-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Revision in SQJ469EP Datasheet from Rev. B to Rev. C For further information, please contact your regional Vishay office. Description of Change: As part of Vishay Siliconix commitment to Quality, we would like to extend to you a courtesy advisory notification of a datasheet revision for SQJ469EP (Doc #65936 Rev C attached). There is no change to the materials or processes used in the manufacture of this part. The changes per this Advisory reflect updates as follows: Removed the following: superscript “d” from AEC-Q101 Qualified feature, superscript “b” from Maximum Power Dissipation rating, and “d. Parametric verification ongoing” note. Renamed: superscript “e, f” to “d, e” of Soldering Recommendations… download now
2024_PIN-SIL-002-2024-Rev0.pdf Product Group: SIL/Mon Apr 29, 2024/PIN-SIL-002-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Datasheet Revision with Spirito SOA for Commercial MOSFETs For further information, please contact your regional Vishay office. Description of Change: As part of Vishay Siliconix commitment to quality, we would like to extend to you a courtesy advisory notification of the datasheet revision with Spirito SOA (Safe Operating Area) for the commercial MOSFET products, including SIR500DP, SIRS4301DP, SIRS4302DP, SIRS4401DP, SIRS4600DP, and SIRS5100DP. There is no change to the materials used in the manufacture of this part. We hope you find this Datasheet Update Advisory helpful. This Advisory is for information only and there is no need for a response. Reason for Change: Datasheet Revision Expected… download now
2024_PIN-SIL-000505-2024-Rev0.pdf Product Group: SIL/Thu Jun 27, 2024/PIN-SIL-000505-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 PIQ material change for IC For further information, please contact your regional Vishay office. Description of Change: Vishay is using a new PIQ material that is standard within our supply chain. Reason for Change: The PIQ vendor to our Foundry Partner has discontinued the PIQ material used on the below products. The replacement PIQ material is provided by the same vendor and is used in much greater volume of production. Expected Influence on Quality/Reliability/Performance: There will be no effect on performance, quality or reliability. Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Siliconix Time Schedule: Start Shipment Date: Mon… download now
2024_PIN-SIL-000501-2024-Rev0.pdf Product Group: SIL/Wed Jan 24, 2024/PIN-SIL-000501-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 SIC476/7/8/9 Datasheet Update For further information, please contact your regional Vishay office. Description of Change: VDD supply minimum specification changed from 4.7V to 4.55V when VIN = VCIN = 6V to 55V, and from 4.7V to 4.5V when VIN = VCIN = 5V Reason for Change: Adjusting the EC table limits for internal LDO output (“VDD Supply”) to match the performance of actual silicon Expected Influence on Quality/Reliability/Performance: There will be no effect on performance, quality or reliability Part Numbers/Series/Families Affected: SiC476ED-T1-GE3, SiC477ED-T1-GE3, SiC478ED-T1-GE3, SiC479ED-T1-GE3, Vishay Brand(S): Vishay Siliconix Time Schedule: Start Shipment Date: Thu Feb 22, 2024 Sample… download now
2024_PIN-SF-416-2024-Rev0.pdf Product Group: SF/Wed Sep 25, 2024/PIN-SF-416-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Sfernice Tape & Reel packaging step: New Subcontrator for size 0402 For further information, please contact your regional Vishay office. Description of Change: In addition with our internal tape&reel packaging step, to improve our capacity and to ensure the best possible service to our customers, Vishay Sfernice took the decision to qualify an new tape&reel packaging external subcontrator. Reason for Change: Improve capacity Expected Influence on Quality/Reliability/Performance: No Influence on the product and packaging Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Sfernice Time Schedule: Start Shipment Date: Wed Sep 25, 2024 Sample… download now
2024_PIN-SF-405-2024-Rev0.pdf Product Group: SF/Mon Apr 29, 2024/PIN-SF-405-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 New laser marking on the LPS1100 For further information, please contact your regional Vishay office. Description of Change: To minimize our reliance on chemical substances that may pose risks to health and the environment, we are implementing a new approach to the LPS1100 marking. Transitioning from conventional ink marking, we are now adopting laser marking technology. This transition not only supports our dedication to sustainability but also enhances the environmental friendliness of our products. Reason for Change: To further enhance our environmental sustainability efforts, we are implementing a new marking procedures in the LPS1100. Transitioning from conventional ink-based methods to laser… download now
2024_PIN-SF-395-2024-Rev0.pdf Product Group: SF/Thu Apr 4, 2024/PIN-SF-395-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Tape & Reel packaging step: Plant location change from French subcontractor to Vishay Sfernice Nice plant. For further information, please contact your regional Vishay office. Description of Change: To ensure the best possible service to our customers, Vishay Sfernice took the decision to repatriate the tape&reel packaging operation of some Thin Film resistors from our French subcontractor to the Nice manufacturing plant. Reason for Change: Our tape&reel packaging subcontractor is on bankruptcy liquidation. Expected Influence on Quality/Reliability/Performance: No Influence on the product and packaging. Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay… download now
2024_PIN-SF-383-2024-Rev0.pdf Product Group: SF/Wed Feb 28, 2024/PIN-SF-383-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Data sheet modification D2TO020 & D2TO035 For further information, please contact your regional Vishay office. Description of Change: Dimensional updated on the data sheet according to manufactured parts. No change on product or production process Reason for Change: Correction of dimensional specification in the data sheet according to real dimensions of manufactured parts. Expected Influence on Quality/Reliability/Performance: None Part Numbers/Series/Families Affected: D2TO020*, D2TO035*, Vishay Brand(S): Vishay Sfernice Time Schedule: Start Shipment Date: Fri Mar 8, 2024 Sample Availability: Not applicable Product Identification: Not applicable Qualification Data: Not applicable Issued By: Thomas… download now
2024_PIN-SF-00369-2024-Rev0.pdf Product Group: SF/Tue Jan 16, 2024/PIN-SF-00369-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 SPECTROL 50X AND 55X SERIES ALTERNATE SOURCE OF CLAMP RINGS For further information, please contact your regional Vishay office. Description of Change: Introduction of a second source of supply for clamp rings Source #1 and source #2 are interchangeable. One can be used in place of the other from batch to batch. Reason for Change: Strengthening of the supply chain (double sourcing) Expected Influence on Quality/Reliability/Performance: Performances remain the same Color change from one source to the other (polished / non-polished stainless steel) Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Spectrol Time Schedule: Start Shipment Date:… download now
2024_PIN-OPT-7462-2024-Rev1.pdf Product Group: OPT/Thu Jun 13, 2024/PIN-OPT-7462-2024-REV-1 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Release of updated datasheets and app notes VEML6030-family and VEML7700 For further information, please contact your regional Vishay office. Description of Change: Change log/short description for the datasheet: No performance change of the part Adjusted resolution Adjusted spectral response ( ALS & white channel) Renamed bits naming Added ID register information Declared configuration registers as R / W (read and write) Detailed description of the implemented changes in the pdf-file attached Change log/short description for the app note: No performance change of the part Adjusted resolution and maximum detectable illuminance as this was wrongly stated in the current appnote from 0.0036 lux/count and… download now
2024_PIN-OPT-1324-2024-Rev1.pdf Product Group: OPT/Mon Sep 30, 2024/PIN-OPT-1324-2024-REV-1 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Annex 1 to PCN-OPT-1324-2024-REV-0 For further information, please contact your regional Vishay office. Description of Change: to provide customer information on LTB/LTS for OLD part number Reason for Change: to provide customer information on LTB/LTS for OLD part number Expected Influence on Quality/Reliability/Performance: no influence on quality/reliability/performance Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Semiconductors Time Schedule: Start Shipment Date: Thu Sep 5, 2024 Sample Availability: available Product Identification: part number and ordering code in the datasheet Qualification Data: available upon request Issued By:… download now
2024_PIN-OPT-1307-2024-Rev0.pdf Product Group: OPT/Wed Jan 31, 2024/PIN-OPT-1307-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Pizza Box Removal for 0603 TLM*1... and Reverse Gullwing PLCC2 VLR*31... series For further information, please contact your regional Vishay office. Description of Change: The packing for Vishay's lead frame based 0603 LEDs and reverse gullwing PLCC2 LEDs is changing. The inner packing box for the single reel, also called "Pizza Box" is removed. However, the external shipping boxes and the MBB packing remain to protect the goods against damage during transportation. The change involves a packing change only. There is no change in the process technology, materials, performance, specification and reliability of the products. Form Fit and Function are not affected. During transition time mixed shipments… download now
2024_PIN-NLR-002-2024-Rev0.pdf Product Group: NLR/Mon Jan 15, 2024/PIN-NLR-002-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Change of appearance of color marking for selected NTCLE series For further information, please contact your regional Vishay office. Description of Change: The visual appearance of the color marking used for selected NTCLE will change because Vishay will use an internal supplier for the color marking material. Reason for Change: More flexibility, in line with product contingency planning Expected Influence on Quality/Reliability/Performance: None Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay BCcomponents Time Schedule: Start Shipment Date: Mon Apr 1, 2024 Sample Availability: upon request Product Identification: By date code and lot… download now
2024_PIN-DI-00648-2024-Rev0.pdf Product Group: DI/Fri Jun 28, 2024/PIN-DI-00648-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 IHDM1107BBEVxxxxx0 DCR and Operating Temperature Range Correction For further information, please contact your regional Vishay office. Description of Change: Typical and maximum DCR values are being corrected to match the more aggressive criteria observed in production. Additionally, the lower end of the temperature rating is being corrected from -55C to -40C (see page 3 for additional information). This is a notice of a datasheet correction only. The part is not changing. The parts will continue to function the same way they have always been. Reason for Change: Datasheet correction Expected Influence on Quality/Reliability/Performance: None. Part design has not changed. Part Numbers/Series/Families… download now
2024_PIN-DI-00645-2024-Rev0.pdf Product Group: DI/Thu May 30, 2024/PIN-DI-00645-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 DCR Correction to IHLP-1616BZ-1x 2.2uH For further information, please contact your regional Vishay office. Description of Change: DCR typical and maximum is being corrected to 43mOhms and 48mOhms, respectively for the 2.2uH value for all IHLP-1616BZ-1x series. There is no process or design change. This is a notice of a datasheet correction. (Originally, DCR typ. and max. were listed as 61mOhms and 68mOhms). Reason for Change: Datasheet correction Expected Influence on Quality/Reliability/Performance: None. The product is not changing. Part Numbers/Series/Families Affected: IHLP1616BZER2R2M1A, IHLP1616BZER2R2M11, IHLP1616BZRZ2R2M1L, Vishay Brand(S): Vishay Dale Time Schedule: Start Shipment Date: Fri… download now
2024_PIN-DI-00638-2024-Rev0.pdf Product Group: DI/Mon Apr 29, 2024/PIN-DI-00638-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 ISAT Datasheet Correction to IHLP2020BZER2R2MA1 For further information, please contact your regional Vishay office. Description of Change: The saturation current graph and the ISAT20% specification on the datasheet is being corrected from 12.5A to 9.5A to match the performance observed by parts currently in production. This is not a design change. The datasheet is being corrected immediately. Reason for Change: Datasheet correction Expected Influence on Quality/Reliability/Performance: None. The part is not changing and will continue to operate the same way as previously. Part Numbers/Series/Families Affected: IHLP2020BZER2R2MA1 Vishay Brand(S): Vishay Dale Time Schedule: Start Shipment Date: Mon May… download now
2024_PIN-DD-004-2024-Rev0.pdf Product Group: DD/Wed Feb 7, 2024/PIN-DD-004-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Typo corrections in the datasheet of KBPC6, KBPC8, 2KBB and 2KBP outline For further information, please contact your regional Vishay office. Description of Change: Vishay Semiconductors communicates some typos correction into the outline drawings of KBPC6, KBPC8, 2KBB, 2KBP datasheets (See Annex 1) Reason for Change: Typo correction Expected Influence on Quality/Reliability/Performance: There will be no effect on product quality, reliability, or performance Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Semiconductors Time Schedule: Start Shipment Date: Mon Feb 12, 2024 Sample Availability: N/A Product Identification: N/A Qualification… download now
2024_PIN-DD-003-2024-Rev0.pdf Product Group: DD/Mon Feb 5, 2024/PIN-DD-003-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Datasheet Curve Enhancement for TVS Product For further information, please contact your regional Vishay office. Description of Change: Update datasheet Fig.2- pulse power or current vs. initial junction temperature curve for SMA, SMB, SMC TRANSZORB® TVS and PAR® TVS products. There is no change in form, fit and function on all involved products. Please refer to annex 1 for change view. The customized part number will adopt the same change unless having specifically agreed data sheet. Reason for Change: Datasheet enhancement Expected Influence on Quality/Reliability/Performance: No change in quality and reliability performance Part Numbers/Series/Families Affected: Please see materials list on the… download now
2024_PIN-DBR-00020-2024-Rev0.pdf Product Group: DBR/Thu Jun 27, 2024/PIN-DBR-00020-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 High Voltage Thick Film Chip Resistor RCV2010-AT e3 and RCV2512-AT e3 AEC-Q200 rev E release For further information, please contact your regional Vishay office. Description of Change: The design of high voltage thick film chip resistors RCV2010-AT e3 and RCV2512-AT e3 series has been optimized and qualified according to AEC-Q200 rev E. There will be no change in product part number and product performance. Reason for Change: Design optimization. Fulfillment of qualification requirements according to AEC-Q200, rev E. Expected Influence on Quality/Reliability/Performance: Not applicable Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay… download now
2024_Phase_3-ESW490-42.pdf Jan 31th, 2024 [Phase 3] ESW490 -42 – IXYS Brand Schottky Diode Discrete Alternative Qual Status To our valued customers , Littelfuse would like to notify the completion of Phase 3 IXYS Brand Schottky Diode Alternative Qualification and would like to supply the latest datasheet for the 10 parts in Phase 3 group through Littelfuse Website . Discrete Schottky - Littelfuse All 10 parts have been fully qualified in accordance with established performance and reliability criteria. The attached pages summarize the qualification results. Full qualification data and/or samples will be available upon request. Form, fit, function changes: There will be changes on alternative parts. Pls refer to lates t datasheets. Part number changes: None Effective date: Feb 29 th, 202 4 Replacement products: N/A Last time buy: N/A Below is the latest status for the rest of Schottky Diode qualification groups: PCN Time Qualification Phase 1 Nov -22 Completed Phase 2 May -23 Completed Phase 3 Jan -24 Completed… download now
2024_PDN_P068120_M12_EX_Distribution_Boxes.pdf Product Discontinuation Notification PD N-PB4 4-202 40409 -00 -A Page 1 Product Discontinuation for passiv e M12 EX distribution boxes Dear Sir or Madam, the products listed below are intended to be discontinued and will no longer be available . Please pass on this product information to your employees and possibly to your customers. All these product discontinuations have been made to support our co ntinued commitment for improvement and ongoing product development. 1. Initial situation 2. Schedule / Availability 3. List of affected article s / follow -up 4. Data For further questions or if you need any additional assistance or information, please contact your local sales office directly. All contacts for sales representatives are available here: http://www.weidmuell er.com/contact Best regards Product Management Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26, 32758 Detmold, Germany Weidmüller – Your partner in Industrial Connectivity We look forward to sharing ideas with you… download now
2024_PDN_P067255.pdf Product Discontinuation Notification PDN-PN4800-20240117-00-A Page 1 Product Discontinuation for Industrial Ethernet products Dear Sir or Madam, the products listed below are intended to be discontinued and will no longer be available after a transitional period. Please pass on this product information to your employees and possibly to your customers. This product discontinuation is the result of our ongoing commitment to continuously improve our products for you. 1. Initial situation 2. Schedule / Availability Discontinuation of PremiumLine managed Switches due to phase out of main IC . Availability of products in discontinuation: As long as stock lasts. Discontinuation date (last time buy date) is set up to 30 st November 2025 . Availability of successor product: All successor products are released for sale and in general available from stock. Product Discontinuation Notification PDN-PN4800-20240117-00-A Page 2 3. List of affected articles Things to consider in terms of successor… download now
2024_PDN_P066242_SAI_M23.pdf Product Discontinuation Notification PD N-PB4 6-202 40212 -00 -A Page 1 Product Discontinuation for M23 connectors Dear Sir or Madam, the products listed below are intended to be discontinued and will no longer be available after a transitional period. Please pass on this product information to your employees and possibly to your customers. All of these product discontinuations have been made to support our co ntinued commitment for improvement and ongoing product development. 1. Initial situation 2. Schedule / Availability 3. List of affected article s / follow -up As part of the continuous development of our product portfolio, we have decided to discontinue the articles listed below for technical and economic reasons. The last order of the affected products will be possible until 31. 03 .202 4. From 01. 04 .2024 the products will no longer be available. 1224020000 - SAI -M23 -SE -6-3.5MM 1224030000 - SAI -M23 -BE -6-3.5MM 1224040000 - SAI -M23 -BE -6-17MM 1224050000 - SAI -M23 -SE… download now
2024_PDN_P063217_Displays-2.pdf Product Discontinuation Notification Page 1 Product discontinuation of “Process monitoring displays” for 4..20 mA loops Dear Sir or Madam, the “Process monitoring displays” for 4..20 mA loops will have to be discontinued and will no longer be available after a short transitional period. This product discontinuation is the result of changing market and supply conditions . Please pass on this product information to your employees and possibly to your customers. 1. Initial situation 2. Schedule / Availability • Affected articles: See tables below 3. • Availability : See tables below 3. Please note that due to shortage of components, orders can be serv ed based on remaining stock only . • When are follow -up articles available? For devices with follow -up aka successor articles, at least one successor product is available already. • Will all articles be discontinued at the same time? See tables below 3. • Order quantities during cancellation phase? Limited based on remaining stock due to… download now
2024_PDN-P066080_FBCon_Limiter.pdf download now
2024_PDN-P054286_00_A_BLA_SLA.pdf Product Discontinuation Notification PDN -PL3 0680 -2023_07_25 -P046479_00 -A Page 1 Product consolidation OMNIMATE ® Signal BLA/SLA Dear Madam or Sir, we hereby inform you that the below listed articles has been subjected to be discontinued and will no longer be available after a transitional period. Please pass this product information only to your employees and possibly to your customers 1. General Overview ___________________________________________________________________________________________________________ ______________________________________________ Type of notification: PCN PDN Short -term action (<6 months) Short -term action due to: Software / Firmware Bugfix Short term delivery stop by supplier Short term recall by supplier Force majeure Product improvement with customer benefit other ___________________________________________________________________________________________________________ 2. General Information… download now
2024_PCN_TR-24048_XH_G24-07682_E.pdf download now
2024_PCN_Plastic-Reel-20230914_Rev0.pdf 丰 宾电子 科技 股份有限公司 Capxon Electronic Technology Co.,Ltd 深圳市光明新区公明镇塘尾村 Tangwei Section, Tangwei Village, Gongming Sub -district, Guangming New Distirct, Shen zhen , China FAX TO: FROM: ATTN: DATE: 2023 -9-14 Process Change Notice （ External ） No .： Sheet No. ： PBB -COP -0029001 Edition ： 6th edition Custom er All customers Spec. SMD blue plastic reel Date .: 2023 -9-20 Qty. Sign Back □Y □N Method □Sample ■MP Requested Dpt. ■RD □Sales □QA Product Warranty □ Y ■ N Material structure ingredient form □ Y ■ N Environ mental Management of Products Material Test Report □ Y ■ N Manufacturers materials test report □ Y ■ N Reason for change Adapt the size and appearance of the blue plastic reel to suit the needs of the machine. Before Reference Annex After Reference Annex Risk assessment Risk -free Environmental management of products material confirmation 1. Test report by the third party ： □ Y Report No. ： Test Date ： ■ N (Remark ： Just change the size and appearance ) 2. XRF test report No. ： /… download now
2024_PCN_ID_277.pdf Honeywell Product/Process ChangeNotification (PCN) PCN ID#:277 Title: Production linere-location intothesame plant Change: Permanent Honeywell Contact Name: Carrasco, MiguelEduardo E- mail: MiguelEduardo.Carrasco@Honeywell.com Title: Quality Engineer I Product Information Affected partsandrevisions: 8AC1, JS-249, 1DM437, 1DP5,JM-1=PE38, JS-150, JS-2,JS- 361, JS-90, JV-321, JX-49, JS-152, DT-2R-A7, MCD2711, 3MN1,3MN11, JX-41, JX-42, 1DM176, 1DM401,1DM79,JS-220, JS-31, JX-20, JX-4,AD5721, AD5721R, DT-2RV212- A7,JE-17, JM-5,JS- 5,JV- 26, JX-220, JX-25, JX-40, JX-51, JE-1,15PA260, JS-258=HON31, DT- 2RV3- A7,VP-14975, JS-60, JV-1,JX- 46, 1DM1, 2DM11, 2DM4,WW1G02A- D9,15PA177- V7,3MN19, VP- 14267, VP-14268, DT-2RV2- A7,JS-307, JS-7,JT- 1,JX- 48, 8MA2, ADD2721, DT-2R48- B6,DT-2RV49- B6,1TB1- 2, JX- 45, JX-53, JM-1,JS- 5=NEW, 2MN24M, JS-33, JS-5-C, JS- 68, JV-20, MC7711, JM-25=PH, JX-10131, JS-10277, DT- 2R722- A7,ADA3721R, JX-96, JS-254, WW2K29H- D9,AD3721R, JM-27, JM-5=PE3, JS-183, JS-85,… download now
2024_PCN_ECR202410001.pdf SD/ RD -003 Form 6 -G Engineering Change Notification ECN No.: ECR202410001 Customer: Date: 2024 -10 -14 Change Items: Design Process Product discontinue Others Subject of Change: Add ition of a new kind of 5kΩ NTC Description of change: Add a new kind of 5kΩ NTC. There are two NTC solutions. Before change: length 3.2 0mm, width 1.65mm,height 1.65mm, the shape of the vitreous body is rectangular, and the internal color is close to light pink . After change: Add a new kind of 5kΩ NTC. There are two NTC solutions. Solution 1: length 3.2 0mm, width 1.65mm, height 1.65mm, the shape of the vitreous body is rectangular, and the internal color is close to light pink. Solution 2: Length 3.2 0mm, diame ter 1.50 mm, the shape of the vitreous body is cylindrical, and the internal color is close to bright red. Reason of change: 1、 In order to introduce the second NTC supplier. The new NTC has a UL listing. 2、 The R -T characteristic curve of the new NTC matches to the specifications. NTC… download now
2024_PCN_DIP_Switches_Material_Change_Notice.pdf 1 / 2 NIDEC COMPONENTS CORP. August 1 st, 2024 Document Management Number 8TEQJ-0591 （1） SATO, Manabu Planning and Design Department Manager Electromechanical Components Department NIDEC COMPONENTS CORP. DIP Slide Switches - Material Change Notice Dear valued customer, Thank you for choosing and supporting the Nidec Components switch products. By this notice we are informing you of an upcoming material change in the manufacturing process of our DIP slide switches. 1. Affected products DIP slide switches: CFS series, CFP series. 2. Details Component name Details Before the change After the change Slider contact Au plating area The whole contacting side Contacting area only Fixed contact Au plating area Faces of both sides Contacting area and soldering area only Metal material Copper alloy (phosphor bronze) Copper alloy (brass) ※ Product part number and specifications remain unchanged. ※ The drawing is for CFS series. The CFP series share the same contact structure with CFS series. The… download now
2024_PCN_Capacitor_laser_printing_ECN2024.8.7.pdf 凯美电机股份有限公司 KAIMEI ELECTRONIC CORP 工程变更 Engineering Change 通知单 ECN 等级 A 申请单ECR 等级B 致 To﹕ 所有客户 All customers 变更编号ECN/ECR Number ﹕RD202 4080001 工程变更名称：Engineering change name 电容胶管上增加激光印字生产工单号 Add laser printing with work order number on capacitor sleeve. 变更对象﹕Change Object： 针对于应于智能表之电容，我司 18 码料号最后一码 H 的产品。 Ca pacitors (the last code of the 18-code part number is "H") are designed for use in smart meters. 变更类型：Change type □ 原材料变更Raw material change □ 原材料供应商变更 Raw material manufacturer change □ 法律规定使用物质变更 Law specified using substances change □ 内控标准的变更 Internal control standard change □ 产品结构/外观/尺寸/ 电性能 SPEC.的变更 Products construction/appearance/dimensions/ch aracteristics SPEC. change □ 设备新增或变更 Equipment(change/new) □ 模具变更 Molding die revised □ 工艺流程 , 场所变更 Manufacturing process & layout change □ 加工/ 作业方法变更 Process method change □ 检查方法变更 Inspection method change 其它： Others 变更内容:( 须填写详细内容及建议具体解决方案 ) Chan ge content: (Detailed content and advice for… download now
2024_PCN-TR-24037-G24-06364_E_Rev0.pdf download now
2024_PCN-TF-003-2024-Rev0.pdf Product Group: TF/Thu Aug 8, 2024/PCN-TF-003-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 IGBR Products-Nickel Removal (Minor Change) For further information, please contact your regional Vishay office. Description of Change: Removing Nickel from the IGBR product Reason for Change: New automated equipment doesn't support the Ni version of the IGBR. Ni doesn't play any role in functioning of the product. New automated equipment will improve the productivity. Expected Influence on Quality/Reliability/Performance: No change in Fit, Form or Function of the products Part Numbers/Series/Families Affected: ?IGBRC5000CJJNCWS, IGBRD1800CKJNCWS, IGBRD5000CJONHWS, IGBRD5000CJWNHWS, Vishay Brand(S): Vishay Electro-Films Time Schedule: Start Shipment Date: Wed Feb 5, 2025 Sample Availability: 10/01/2024… download now
2024_PCN-TC-010-2023-Rev0.pdf Product Group: TC/Thu Jan 11, 2024/PCN-TC-010-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Addition of Lot ID code to product marking for T59/T54 family. Unify CAP marking designation. For further information, please contact your regional Vishay office. Description of Change: Add four-digit Lot ID code to capacitor marking in order to provide individual unit traceability. Unify CAP marking designation from plain to coding style. Reason for Change: Improvement of individual unit traceability. Unification of CAP marking designation. Expected Influence on Quality/Reliability/Performance: No. Part Numbers/Series/Families Affected: T54EE*, T59EE*, Vishay Brand(S): Vishay Time Schedule: Start Shipment Date: Wed Jul 10, 2024 Sample Availability: Upon Request Product Identification: Not Applicable… download now
2024_PCN-SIL-062-2024-Rev0.pdf Product Group: SIL/Fri Nov 1, 2024/PCN-SIL-062-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Vishay Siliconix Announces Site Transfer of Wafer Fabrication for Commercial Power MOSFETs (TrenchFET® Gen-IV 45V) For further information, please contact your regional Vishay office. Description of Change: To meet increasing demand with more flexibility for power MOSFETs, Vishay Siliconix now is in the process of sitetransfer of wafer fabrication on commercial TrenchFET® Gen-IV 45V Power MOSFET products to the foundry partner Tower Semiconductor. Tower Semiconductor has been a subcontracting partner of Vishay Siliconix since 1995. Founded in 1993, Tower Semiconductor is a worldwide supplier for foundry services of wafer manufacturing. Tower Semiconductor locates in Migdal Haemak, Israel, and has… download now
2024_PCN-SIL-060-2024-Rev0.pdf Product Group: SIL/Mon Oct 21, 2024/PCN-SIL-060-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Vishay Siliconix Announces Manufacturing Capacity Expansion for Commercial Power MOSFET For further information, please contact your regional Vishay office. Description of Change: To meet increasing demand with more flexibility for power MOSFETs, Vishay Siliconix is expending the assembly and test capacity of PowerPAK 1212-8S package for commercial Low-Voltage MOSFETs in partner United Test and Assembly Center Ltd. (UTAC). UTAC has been a subcontracting partner of Vishay Siliconix. Founded in 1997, UTAC is a leading independent provider of assembly and test services for a broad range of semiconductor products in analog, mixed-signal and logic, and memory. UTAC locates in Bangkok, Thailand, and has… download now
2024_PCN-SIL-059-2024-Rev0.pdf Product Group: SIL/Mon Oct 21, 2024/PCN-SIL-059-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Vishay Siliconix Announces Site-Transfer of Wafer Fab as the Capacity Expansion for Commercial Power MOSFET For further information, please contact your regional Vishay office. Description of Change: To meet increasing demand for Power MOSFET products, Vishay Siliconix is in the process of transfer of wafer fabrication on commercial 1G-SG platform of TrenchFET® Power MOSFET products to foundry partner, Silan Microchip Manufacturing Co., Ltd. (Silan), and the impacted parts will be manufactured in the qulified subcon site, UTAC. Silan has been a subcontracting partner of Vishay Siliiconix; founded in September 1997 as a high-tech enterprise specializing in IC design and the manufacturing of… download now
2024_PCN-SIL-045-2024-Rev0-VERSION-45461.pdf Product Group: SIL/Mon Jul 1, 2024/PCN-SIL-045-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 530MC Automotive MOSFET Process Transfer to Tower Semiconductor - SQJ138EP For further information, please contact your regional Vishay office. Description of Change: In order to increase front end capacity, Vishay is transferring some production of part number SQJ138EP to Tower Semiconductor Migdal Haemek (TMH) in Israel. Reason for Change: Capacity Expansion Expected Influence on Quality/Reliability/Performance: None Part Numbers/Series/Families Affected: SQJ138EP-T1_GE3, SQJ138EP-T2_GE3, Vishay Brand(S): Vishay Siliconix Time Schedule: Start Shipment Date: Sat Dec 28, 2024 Sample Availability: Samples available on request Product Identification: SQJ138EP-T1_JE3 Qualification Data: AEC Q101… download now
2024_PCN-SIL-044-2024-Rev0-VERSION-45424.pdf Product Group: SIL/Mon Jul 1, 2024/PCN-SIL-044-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 530MC Automotive MOSFET Process Transfer to Tower Semiconductor - SQJ140EP For further information, please contact your regional Vishay office. Description of Change: In order to increase front end capacity, Vishay is transferring some production of part number SQJ140EP to Tower Semiconductor Migdal Haemek (TMH) in Israel. Reason for Change: Capacity Expansion Expected Influence on Quality/Reliability/Performance: None Part Numbers/Series/Families Affected: SQJ140EP-T1_GE3, SQJ140EP-T2_GE3, Vishay Brand(S): Vishay Siliconix Time Schedule: Start Shipment Date: Sat Dec 28, 2024 Sample Availability: Samples available on request Product Identification: SQJ140EP-T1_JE3 Qualification Data: AEC Q101… download now
2024_PCN-SIL-001-2024-Rev0-VERSION-35025.pdf Product Group: SIL/Tue Jan 9, 2024/PCN-SIL-001-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Vishay Siliconix Announces Manufacturing Capacity Expansion of BGBM Wafer Process for Commercial Power MOSFETs in PowerPAIR® Packages For further information, please contact your regional Vishay office. Description of Change: To meet increasing demand for commercial Power MOSFET products, Vishay Siliconix announces the qualification of wafer back-grind and back-metallization (BGBM) on select Commercial Power MOSFET in PowerPAIR® 3x3, PowerPAIR® 3x3FS, PowerPAIR® 6x5, and PowerPAIR® 6x5F packages at Prosperity Power Technology Inc.. ProPowertek, founded at the Hsinchu Science Park in Nov’20, aims to provide customers with engineering services for the center and backend wafer making process, and is… download now
2024_PCN-SIL-000506-2024-Rev0.pdf Product Group: SIL/Thu Jun 13, 2024/PCN-SIL-000506-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 DG441LE and DG442LE Test condition change For further information, please contact your regional Vishay office. Description of Change: DG441LE and DG442LE Test condition changed from 2.7V to 3V and specification limits are tighten. Reason for Change: Increase of supply voltage to 3V during production ATE testing allows a more consistent “Drain-Source On-Resistance” measurement which improves manufacturability and is more reflective of real application conditions which use a 3.3V supply voltage or greater. Expected Influence on Quality/Reliability/Performance: There will be no effect on performance, quality or reliability. Part Numbers/Series/Families Affected: Please see materials list on the… download now
2024_PCN-SIL-000420-2023-Rev0.pdf Product Group: SIL/Tue Jan 9, 2024/PCN-SIL-000420-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 DG2733E switch leakage limits update. For further information, please contact your regional Vishay office. Description of Change: Adding dedicated switch leakage specification for DG2733E Reason for Change: To have dedicated leakage specifications for each part Expected Influence on Quality/Reliability/Performance: There will be no effect on performance, quality or reliability. Part Numbers/Series/Families Affected: DG2733EDQ-T1-GE3, DG2733EDN-T1-GE4, Vishay Brand(S): Vishay Siliconix Time Schedule: Start Shipment Date: Sat Mar 9, 2024 Sample Availability: Available upon request Product Identification: Date Code Qualification Data: Qualification Data available upon request This PCN is considered… download now
2024_PCN-SF-425-2024-Rev0.pdf Product Group: SF/Thu Nov 14, 2024/PCN-SF-425-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Production move of final Assembly from Hyeres factory (FR) to Volary factory (CZ) For further information, please contact your regional Vishay office. Description of Change: Production move of final Assembly from Hyeres factory (FR) to Volary factory (CZ) : Concerned operation is the final assembly of electrical modules with mechanical module. All others operations were already done in Volary factory (CZ) since the beginning of the project. Reason for Change: Rationalization of resources and production capacities. Expected Influence on Quality/Reliability/Performance: None. Volary factory (CZ) is already qualified for P11 manufacturing. Part Numbers/Series/Families Affected: P11S2V0APFY00T1860 Vishay… download now
2024_PCN-SF-419-2024-Rev1.pdf Product Group: SF/Fri Oct 11, 2024/PCN-SF-419-2024-REV-1 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Surface treatment modification on all RH series For further information, please contact your regional Vishay office. Description of Change: No treatment on Edge Reason for Change: Obsolete processing process Expected Influence on Quality/Reliability/Performance: Equivalent performances Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Sfernice Time Schedule: Start Shipment Date: Fri Jan 17, 2025 Sample Availability: Earliest 01/17/2025 but depend of RH series size - Switch done at end of stock with old treatment Product Identification: Date Code Qualification Data: Qualification Data available on request This PCN is considered approved,… download now
2024_PCN-SF-418-2024-Rev0.pdf Product Group: SF/Wed Sep 11, 2024/PCN-SF-418-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 PCN-Sfernice Precision resistors size 1505: Tape Width from 8mm to 12mm For further information, please contact your regional Vishay office. Description of Change: PCN-Tape modification for precision resistors size 1505: Tape Width from 8mm to 12mm Reason for Change: Supply this tape format at 8mm for this 1505 size has become impossible Expected Influence on Quality/Reliability/Performance: no impact on product Part Numbers/Series/Families Affected: P1505*, L1505*, CHP1505*, HCHP1505*, Vishay Brand(S): Vishay Sfernice Time Schedule: Start Shipment Date: Mon Dec 16, 2024 Sample Availability: NA Product Identification: NA Qualification Data: NA This PCN is considered approved, without further… download now
2024_PCN-SF-403-2024-Rev0.pdf Product Group: SF/Tue May 7, 2024/PCN-SF-403-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Tape modification for Thin-Film resistors size 2010 and Thick-film resistors size 1020: Tape Width from 8mm to 12mm For further information, please contact your regional Vishay office. Description of Change: Tape modification for Thin-Film size 2010 and Thick-film size 1020: Tape Width from 8mm to 12mm. Qty / reel increase from 1000 to 2000pcs max. Reason for Change: This tape format at 8mm is not standard and supply has become impossible. Expected Influence on Quality/Reliability/Performance: No impact on product. Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Sfernice Time Schedule: Start Shipment Date: Tue Aug 6, 2024 Sample… download now
2024_PCN-SF-394-2024-Rev0.pdf Product Group: SF/Fri Apr 26, 2024/PCN-SF-394-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 SFERNICE RTO/DTO/D2TO product families overglaze upgrade to lead-free version For further information, please contact your regional Vishay office. Description of Change: Overglaze upgrade to lead-free version Reason for Change: We are pleased to announce that we are upgrading the overglaze of our resistors to a lead-free variant. This improvement aligns with our commitment to environmental responsibility and product safety. By transitioning to lead-free overglass, we are reducing the environmental impact associated with traditional lead-based materials. This upgrade reflects our dedication to providing high- quality, sustainable solutions to meet the evolving needs of our customers while contributing… download now
2024_PCN-SF-393-2024-Rev0.pdf download now
2024_PCN-SF-392-2024-Rev0.pdf Product Group: SF/Wed Mar 20, 2024/PCN-SF-392-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Production move of final Assembly from Hyeres factory (FR) to Volary factory (CZ). For further information, please contact your regional Vishay office. Description of Change: Production move of final Assembly from Hyeres factory (FR) to Volary factory (CZ) : Concerned operation is the final assembly of electrical modules with mechanical module. All others operations were already done in Volary factory (CZ) since the beginning of the project. Reason for Change: Rationalization of resources and production capacities. Expected Influence on Quality/Reliability/Performance: None. Volary factory (CZ) is already qualified for P11 manufacturing. Part Numbers/Series/Families Affected: P11S2V0APFY00T1834,… download now
2024_PCN-SF-388-2024-Rev0.pdf Product Group: SF/Wed Mar 13, 2024/PCN-SF-388-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Activation of alternative production site for PP27 BS/SS For further information, please contact your regional Vishay office. Description of Change: Activation of alternative production site (Tunisia) for PP27 BS/SS Family. Reason for Change: Production flexibility, security of procurement & capacity increase. Expected Influence on Quality/Reliability/Performance: None. Mechanical, Electrical and Quality characteristics will remain the same. No part numbering change. Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay MCB Time Schedule: Start Shipment Date: Sun Sep 1, 2024 Sample Availability: 11/01/2024 Product Identification: Date code >… download now
2024_PCN-SF-387-2024-Rev0.pdf Product Group: SF/Fri Feb 23, 2024/PCN-SF-387-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Sfernice-CH02016 & CHA02016 Backside color change For further information, please contact your regional Vishay office. Description of Change: Blue Ink instead of Green Ink on the rear side of the CH02016/CHA02016 resistor. Reason for Change: REACH compliant. Expected Influence on Quality/Reliability/Performance: No influence on reliability of the component: The blue ink is not conductive. CH02016 with active face down in tape and reel (F or M termination) have back-side color inked to indicate right orientation and facilitate the positioning in the Vishay tape and reel process. Part Numbers/Series/Families Affected: CH02016*, CHA02016*, Vishay Brand(S): Vishay Sfernice Time Schedule: Start Shipment Date:… download now
2024_PCN-SF-386-2024-Rev0.pdf Product Group: SF/Wed Feb 21, 2024/PCN-SF-386-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 PCN - INTRODUCTION OF ALTERNATIVE GREASE ON TRIMMER MODELS T7YA, T7YB, T7X, P8P and P8S For further information, please contact your regional Vishay office. Description of Change: Introduction of an alternative grease Reason for Change: Due to discontinuation of grease material, we have secured grease provision thanks to a new grease source. Grease is used to reduce wear between wiper and collector/resistive track and for electrical noise reduction. We have qualified this alternative grease. Expected Influence on Quality/Reliability/Performance: No influence on Quality/Reliability/Performance, according to qualification results Part Numbers/Series/Families Affected: T7YA*, T7YB*, T7X*, P8P*, P8S* Vishay… download now
2024_PCN-SF-366-2023-Rev0.pdf Product Group: SF/Fri Dec 22, 2023/PCN-SF-366-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Sfernice - P-P2TC-PEP-L-PHT-PVHT-PHR-PFRR-RV-CH/PRA-CNW-PRAHT- CNWHT-PRAHR product families Epoxy protective layer modification For further information, please contact your regional Vishay office. Description of Change: Due to the discontinuation of the epoxy layer of the P-P2TC-PEP-L-PHT-PVHT-PHR-PFRR-RV-CH and network PRA-CNW-PRAHT-CNWHT-PRAHR product families, Vishay Sfernice is using a new protective layer. Products specifications remain unchanged. Reason for Change: Epoxy obsolescence. Expected Influence on Quality/Reliability/Performance: The new protective layer will have no impact on the fit, function and reliability of the devices. Part Numbers/Series/Families Affected: Please see materials list… download now
2024_PCN-SF-00424-2024-Rev0.pdf Product Group: SF/Mon Oct 21, 2024/PCN-SF-00424-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 ECS SERIES INTRODUCTION OF A NEW LUBRICANT For further information, please contact your regional Vishay office. Description of Change: Implementation of a new lubricant for the wiper’s sliding contact of all PN's from ECS series. Note: the wiper is the part of the potentiometer that moves/slides along the resistive element. Reason for Change: The current lubricant is obsolete. Expected Influence on Quality/Reliability/Performance: The new lubricant exhibits similar performances to the old one under VISHAY laboratory test conditions. See Qualification Test Report Ref. "244110" attached in appendix of this PCN. Part Numbers/Series/Families Affected: ECS78* Vishay Brand(S): Vishay Sfernice Time Schedule:… download now
2024_PCN-SF-00413-2024-Rev0.pdf Product Group: SF/Tue Jul 23, 2024/PCN-SF-00413-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 INTRODUCTION OF SURTEC 650 SURFACE TREATMENT ROT SF SERIES (ALL SIZES) For further information, please contact your regional Vishay office. Description of Change: Introduction of surface treatment SURTEC 650 as substitution of Chromic Acid Anodizing and ALODINE 1200 on front plates aluminum parts. Reason for Change: Chromic Acid Anodizing and ALODINE 1200 surface treatments are not compliant to REACH regulation (presence of hexavalent chromium) Expected Influence on Quality/Reliability/Performance: Protection performances of SURTEC 650 treatment are similar to Chromic Acid Anodizing and ALODINE 1200. SURTEC 650 is electrically conductive while Chromic Acid Anodizing is insulating. Part… download now
2024_PCN-SF-00406-2024-Rev0.pdf Product Group: SF/Wed May 22, 2024/PCN-SF-00406-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 SPECTROL - ALL WIREWOUND POSITION SENSORS, POTENTIOMETERS AND TRIMMERS INTRODUCTION OF A NEW SOURCE OF RESISTANCE WIRES For further information, please contact your regional Vishay office. Description of Change: Introduction of an alternative source of resistance wires for all wirewound series (all ohmic values). Reason for Change: Obsolescence. The incumbent vendor stopped its production of resistance wires. Expected Influence on Quality/Reliability/Performance: None. Performances of products remain the same. Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Spectrol Time Schedule: Start Shipment Date: Fri Jun 21, 2024 Sample Availability:… download now
2024_PCN-SAI-Y-5S_M12.pdf Product Change Notification PCN-PB46-240503 -EN -A Page 1 Technical change to Y-distributor (1881710000 - SAI -Y-5S M12/M12 2BO ) Dear Madam or Sir, the Y-distributor 1881710000 - SAI -Y-5S M12/M12 2BO will be changed. Please pass on this Product Change Notification (PCN) to your employees and, if applicable, to your customers . 1. General overview Type of change : short -term (executed within the next 6 month s) normal (executed after 6 mont hs) Short -term action due to: Software or firmware bugfix Delivery stop by supplier Short -term recall by supplier Force majeure Product improvement other Short -term action due to: Use of lead free components 2. General information So far, leaded versions have been used as thread rings . To make the products sustainable, the concept is being converted to a lead -free version. 3. Change details Until now, a lead -containing material was used for the threaded rings of the affected article. As part of the changeover, these will be converted to a… download now
2024_PCN-PL322100-20230906-00-A.pdf Product Change Notification PCN -PL3 22100 -202 3090 6-00 -A Page 1 Changeover to packaging inserts for the LM 3.5 product family Dear Madam or Sir, Product adaptations serve the purpose of continuous product and/or process improvement. The listed products are delivered in a modified version. Please pass this product information on to your employees and, if needed, to your customers . 1. General Overview ___________________________________________________________________________________________________________ ______________________________________________ Type of notification: PCN PDN Short -term action Short -term action due to: Software / Firmware Bugfix Short term delivery stop by supplier Short term recall by supplier Force majeure Product improvement with customer benefit other ___________________________________________________________________________________________________________ 2. Technical changes _____________________________________________________________________… download now
2024_PCN-PL35-A-EN.pdf Product Change Notification 202 405 08 -PCN -PL35 -A-EN -External Page 1 Technic al change to RS F LPK2, RSSD LPK2 and RS VERT LPK2 modules Dear Madam or Sir, The products listed below are subject to a product change and will be supplied in a modified revision. Please pass this product information on to your employees and, if needed, to your customers. All modifications mentioned have been made to support our ongoing commitment to continual improvement and ongoing product development. 1. Initial situation DEKAFIX detail Tampoprint detail Example of Family RS SD (w/ LP K connector) Example of Family RS F (w/ LP K connector) Example of Family RS VERT (w/ LPK connector) Articles on Section 5 were delivered in the past with LP K connectors. Furthermore, they were delivered with Dekafix* *Dekafix is the universal marker for terminals, plug -in connectors and electronic modules from the Weidmüller product range (see detail). Product Change Notification 202 405 08 -PCN -PL35 -A-EN -External… download now
2024_PCN-OPT-1360-2024-Rev0.pdf Product Group: OPT/Tue Nov 5, 2024/PCN-OPT-1360-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Alternative Emitter and Detector for Optocouplers SFH601, SFH619A, SFH640, and H11Dx For further information, please contact your regional Vishay office. Description of Change: Vishay is implementing a chip change in the optocoupler product series SFH601, SFH619A, SFH640, and H11Dx due to the obsolescence of the original detector die. To ensure long-term supply, two alternative detectors have been qualified. In addition, an alternative emitter will be introduced. SFH601: addition of an alternate emitter SFH619A: addition of an alternate emitter and detector SFH640 / H11Dx: two alternate detectors and an alternate emitter Reason for Change: The detector die was discontinued by the manufacturer. The… download now
2024_PCN-OPT-1353-2024-Rev0.pdf Product Group: OPT/Wed Sep 18, 2024/PCN-OPT-1353-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Alternative emitter and detector chip source for VOT8xxxA phototriac optocoupler series For further information, please contact your regional Vishay office. Description of Change: An alternative emitter and detector chip were qualified for the VOT8xxxA phototriac optocouplers Reason for Change: To ensure that Vishays phototriac supply is resilient, a second emitter and photodetector chip have been qualified. Traceability of source is maintained via the part marking. Expected Influence on Quality/Reliability/Performance: There is no impact on the form, fit, or function. Quality and performance remain the same. The datasheet minimum and maximum performance parameters will remain the same. Nevertheless,… download now
2024_PCN-OPT-1350-2024-Rev0.pdf Product Group: OPT/Mon Oct 7, 2024/PCN-OPT-1350-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 VO3120, VO3150, VOW3120 IGBT and MOSFET drivers green production line transfer For further information, please contact your regional Vishay office. Description of Change: - The affected parts will be transferred to a new production line. The VOW3120 has already been transferred to this line. - The mold material will be changed to meet the Vishay Green environmental standard. The VOW3120 already meets the Vishay Green standard. - The lead frame will change from Cu to Ni plating on the emitter side for the VO3120 and VO3150. - The emitter chip will be fabricated using the new inhouse process. - The bond wire diameter will change from 30 µm to the standard 25 µm. - The safety agency approvals will be… download now
2024_PCN-OPT-1349-2024-Rev0.pdf Product Group: OPT/Fri Oct 25, 2024/PCN-OPT-1349-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Production line harmonization and new chipset introduction for DIP-8 1 MBd High Speed optocoupler For further information, please contact your regional Vishay office. Description of Change: - the bond wire diameter will change from 30 µm to the standard 25 µm - the lead frames will be updated and change from Cu to Ni plating on the emitter side - the outer mold compound will be harmonized with the production line - the emitter chip will be fabricated using the new inhouse process - A second or alternative detector chip will be introduced for manufacturing flexibility Reason for Change: To harmonize the DIP-8 1 MBd high speed optocoupler products Expected Influence on Quality/Reliability/Performance:… download now
2024_PCN-OPT-1340-2024-Rev0-VERSION-46917.pdf Product Group: OPT/Wed Jul 31, 2024/PCN-OPT-1340-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 IL42x, BRT1x OptoTRIACs green production line transfer For further information, please contact your regional Vishay office. Description of Change: - The mold material will be changed to meet green environmental standard. - The affected parts will be transferred to a new production line. - The inhouse emitter and detector chips announced in PCN OPT-1237-2022 and OPT-1264-2023 will be used. - A Ni plating on the emitter lead frame will be introduced. - The lead frames, bond wire diameter will be adapted. - The agency approvals will be updated. Reason for Change: Production line transfer to support green environmental standard. Expected Influence on Quality/Reliability/Performance: No influence on… download now
2024_PCN-OPT-1335-2024-Rev0_3_.pdf download now
2024_PCN-OPT-1335-2024-Rev0.pdf Product Group: OPT/Thu Jun 6, 2024/PCN-OPT-1335-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Standardization of Materials for PCB based 0402 and 0603 ChipLEDs For further information, please contact your regional Vishay office. Description of Change: VISHAY is standardizing the materials for the PCB-based 0402 and 0603 ChipLEDs. Details of the changes are described in the attached document. Annotations about time schedule: The components covered by this PCN will start shipping on or after Oct 1st, 2024. The exact date will be a function of the depletion of the existing product inventories. Exception: Due to unexpected high orders for white ChipLEDs, the LTB quantity of the discontinued TAG converter has been consumed earlier as expected. Deliveries of VLMW15.. series before October 1, 2024 can… download now
2024_PCN-OPT-1328-2024-Rev0-VERSION-47447.pdf Product Group: OPT/Wed Aug 7, 2024/PCN-OPT-1328-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Low Forward Current Optocouplers with Phototransistor Output in SOIC-8 Package - Change of Phototransistor For further information, please contact your regional Vishay office. Description of Change: Change from an external supplier to an in-house phototransistor. This chip has been used in other optocouplers for many years. Reason for Change: To support Vishay's increasing demand requirements, to allow flexibility in manufacturing, and to assure long-term product availability, we have qualified our own, in-house fabricated phototransistor. The components covered by this PCN will start shipping on or after the below mentioned start shipment date unless already approved by customer. The exact date will… download now
2024_PCN-OPT-1327-2024-Rev1.pdf Product Group: OPT/Tue Jun 4, 2024/PCN-OPT-1327-2024-REV-1 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 VBP / VBPW Series-Pre-plated LF change/ Silver paste 2nd source For further information, please contact your regional Vishay office. Description of Change: * change to pre-plated LF * add 2nd source for silver paste Reason for Change: 1. New LF structure enforce its mechanical strength in the encapsulant, to prevent stress displacement. 2.use pre-plated lead frame and cancel the plating process, better process control 3. add second source for silver paste as per BCP Expected Influence on Quality/Reliability/Performance: No influence on quality,reliability and performance expected Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay… download now
2024_PCN-OPT-1325-2024-Rev0-VERSION-43026.pdf Product Group: OPT/Thu Jun 6, 2024/PCN-OPT-1325-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Product and Process improvements for dual channel photovoltaic mosfet driver VO1263 For further information, please contact your regional Vishay office. Description of Change: 1. Vishay will transfer the production of the dual channel photovoltaic mosfet driver VO1263 from a conventional production line to a modern and automated matrix line. 2. An alternative in-house emitter using our new MOCVD fabrication process has been qualified. 3. The leadframe will be plated with Nickel. 4. The outer mold compound will be updated. 5. The diameter of the gold wire used to bond the emitter and photodiode to the lead-frame will be changed from 30 micron to 25 micron. Reason for Change: Vishay will move the the… download now
2024_PCN-OPT-1324-2024-Rev0.pdf Product Group: OPT/Tue Aug 6, 2024/PCN-OPT-1324-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 VEMT37..X02: change of the Phototransistor chip For further information, please contact your regional Vishay office. Description of Change: Change of the phototransistor chip from T4530P to T5096P The Phototransistors are now manufactured on 6 inch wafers instead of the 4 inch wafers Apart from that, change of the phototransistor results in minor changes in device characteristics, changes in the datasheet characteristics are listed in the document attached to this PCN: Changelog Reason for Change: To qualify new chip T5096P on 6" wafer Expected Influence on Quality/Reliability/Performance: No influence on quality,reliability and performance expected. Nevertheless, we recommend to test the product in… download now
2024_PCN-OPT-1322-2024-Rev0.pdf Product Group: OPT/Wed Apr 10, 2024/PCN-OPT-1322-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Optocoupler: New Outer Mold Compound and 25 micron Gold Wire Qualification for linear coupler For further information, please contact your regional Vishay office. Description of Change: Qualification of mold compound and 25 micron gold wire. Reason for Change: A new mold compound has been qualified to harmonize our manufacturing processes, the diameter of the gold wire used to bond the emitter and photodiode to the lead-frame will be reduced to 25 micron. Expected Influence on Quality/Reliability/Performance: There is no change in form, fit and function of the affected parts. The performance as well as the reliability remains unchanged. The deviations in the performance are highlighted in the attached… download now
2024_PCN-OPT-1315-2024-Rev0-VERSION-39254.pdf Product Group: OPT/Thu Mar 21, 2024/PCN-OPT-1315-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Product and Process Improvements for DIL-4 Phototransistor Optocouplers For further information, please contact your regional Vishay office. Description of Change: - Vishay will convert the remaining DIL-4 Phototransistor Optocouplers from a conventional production line to a modern, automated matrix manufacturing line. - The plating used on the lead frame will be updated. - For assurance of supply, an alternative in-house emitter has been qualified. Reason for Change: Vishay will move the production of DIL-4 optocouplers to our newer, automated manufacturing line to streamline production and optimize supply chain. This change will allow the utilization of the same materials, construction, and… download now
2024_PCN-OPT-1311-2024-Rev0-VERSION-40221.pdf Product Group: OPT/Wed Apr 10, 2024/PCN-OPT-1311-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 TCxT1600X01, TCUT1630X01, TCUT1800X01: Wafer diameter change for Phototransistor. For further information, please contact your regional Vishay office. Description of Change: The Phototransistors are now manufactured on 6-inch wafers instead of the 4-inch wafers. This change results in no change in device characteristics nor in the fit, form and function. No change in datasheet. Please refer to Annex 1 for change view, Part ordering code and LTB/LTS information for current ordering code. Reason for Change: Phototransistors: Discontinuation of the 4-inch wafer substrates Expected Influence on Quality/Reliability/Performance: No influence on quality, reliability and performance expected. Nevertheless, we… download now
2024_PCN-OPT-1308-2024-Rev0.pdf Product Group: OPT/Thu Jan 25, 2024/PCN-OPT-1308-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Introduction of a new IC for existing Aether products For further information, please contact your regional Vishay office. Description of Change: We are pleased to announce the introduction of the new in-house designed Cyllene 2 IC. The new IC uses the latest Chip Technology of the world´s leading IC Foundry. The Cyllene 2 IC will replace the "Aether" IC in existing Product Series without a name change and without any mechanical changes. The Cyllene 2 IC provides an improved sensitivity in dark ambient, a wider supply voltage range (2.0-5.5V vs. 2.5-5.5V) and a better robustness against supply voltage ripple (PSRR) and Wi-Fi interference. It is required to test the product in customers application.… download now
2024_PCN-OPT-1302-2023-Rev0-VERSION-40798.pdf Product Group: OPT/Wed Apr 24, 2024/PCN-OPT-1302-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Optocouplers with Phototransistor Output in SOIC-8 Package - Product and Process Improvements For further information, please contact your regional Vishay office. Description of Change: - New mold compound for inner and outer mold - Updated lead frame plating - Migration to 25-µm wire bonding - Qualification of second in-house emitter Reason for Change: Vishay Opto is streamlining the production process and focusing our supply chain. These changes enable the use of the same materials, construction, and assembly processes that are employed on other optocouplers Vishay manufactures. In addition, to support Vishay's increasing demand requirements, to allow flexibility in manufacturing, and to assure… download now
2024_PCN-OPT-1296-2023-Rev1-VERSION-45882.pdf Product Group: OPT/Mon Jul 8, 2024/PCN-OPT-1296-2023-REV-1 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 TSHG6400, TSHG5210,TSHG5410, TSHG6200, TSHG6400, TSHG6400-CSZ, TSHG6410 - Change in chip For further information, please contact your regional Vishay office. Description of Change: Introduce the new state-of-the art Chip technology (MOCVD) to ensure long term availability of product series. The new chip generation will have a slight change in radiant intensity, radiant power,spectral response and forward voltage. For detailed overview, please refer to the changes summary in the attachment. Reason for Change: Introduce the new state-of-the art Chip technology (MOCVD) Expected Influence on Quality/Reliability/Performance: No influence on quality and reliability expected. Nevertheless, we request the… download now
2024_PCN-OPT-1178-2021-Rev0.pdf Product Group: OPT/Fri May 31, 2024/PCN-OPT-1178-2021-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 TSTA7100, TSTA7300, TSTA7500 - Change in chip For further information, please contact your regional Vishay office. Description of Change: Introduce the new state-of-the art Chip technology (MOCVD) to ensure long term availability of product series. The new chip generation will have Higher radiant intensity,Higher radiant power,Change in spectral response and a slightly higher forward voltage. For detailed overview, please refer to the changes summary in the attachment. Reason for Change: Introduce the new state-of-the art Chip technology (MOCVD) Expected Influence on Quality/Reliability/Performance: No influence on quality and reliability expected. Nevertheless, we request the customer to test the… download now
2024_PCN-OPT-1177-2021-Rev0.pdf Product Group: OPT/Fri May 31, 2024/PCN-OPT-1177-2021-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 TSTS7100, TSTS7300, TSTS7500- Change in chip For further information, please contact your regional Vishay office. Description of Change: Introduce the new state-of-the art Chip technology (MOCVD) to ensure long term availability of product series. The new chip generation will have higher radiant intensity,higher radiant power and slightly higher forward voltage. For detailed overview, please refer to the changes summary in the attachment. Reason for Change: Introduce the new state-of-the art Chip technology (MOCVD) Expected Influence on Quality/Reliability/Performance: No influence on quality and reliability expected. Nevertheless, we request the customer to test the parts in customers application.… download now
2024_PCN-NLR-005-2024-Rev0.pdf Product Group: NLR/Wed May 22, 2024/PCN-NLR-005-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Change of packing for PTCELxxxxxxxBE(xxx) For further information, please contact your regional Vishay office. Description of Change: Vishay has the intention to change the bulk packing used for PTCELxxxxxxxBE(xxx) from cardboard layered to recyclable stacked plastic tray packing. SPQ will change from 100 to 200 for PTCEL13xxxxxBE(xxx) and from 50 to 200 for PTCEL17xxxxxBE(xxx) and PTCEL67xxxxxBE(xxx). See pictures in Appendix 1 Reason for Change: More packing efficiency and safeguard product quality during transportation. Expected Influence on Quality/Reliability/Performance: None Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay… download now
2024_PCN-MLC-00004-2024-Rev0.pdf Product Group: MLC/Thu Aug 15, 2024/PCN-MLC-00004-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Dielectric Material Change for X7R VJ Commercial Series Case Size 0603 For further information, please contact your regional Vishay office. Description of Change: Replace in listed part numbers of this PCN current X7R (Y) dielectric material with High K X7R material which is already in use for several other ratings. Reason for Change: Improved reliability of products: -High K X7R is less sensitive to termination deficiencies. -High K X7R has a better level of reliability compared to currently used material. Expected Influence on Quality/Reliability/Performance: - No change in electrical parameters. - Increased dielectric constant allows parts to be manufactured with thicker dielectric layers, result… download now
2024_PCN-G24-07587_E.pdf download now
2024_PCN-FC-002-2024-Rev0.pdf Product Group: FC/Mon Jul 1, 2024/PCN-FC-002-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Case Plastic Material Change on MKP18405681251, MKP18406100851, MKP18406144051, MKP18406204051, MKP18405200851 and MKP18405270891 For further information, please contact your regional Vishay office. Description of Change: Vishay announces that, due to ongoing shortage of the case material ABS utilized on the affected parts, the material will be changed to PBT. The PBT material is widely used in current Industrial and Automotive film capacitors portfolio. This action will secure consistent deliveries of the affected parts. Reason for Change: Ensure reliable supply of affected Part Numbers Expected Influence on Quality/Reliability/Performance: None Part Numbers/Series/Families Affected: Please see materials… download now
2024_PCN-EC-004-2024-Rev0.pdf Product Group: EC/Thu Mar 28, 2024/PCN-EC-004-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Vishay ESTA LVAC Tubular Power Capacitors of PhMKP(g) and ACMKP Series: Transition of Production to Loni / India and Change of Part Numbers (also for PhMKDg triangular types) For further information, please contact your regional Vishay office. Description of Change: Transition of the production of LVAC TUBULAR Power Capacitors from Blatna/CZ to Loni/IN. Part numbers/series affected: PhMKP with part suffix 5341 will change to 5347; PhMKPg with 5343 to 5348; ACMKP with 5343 to 5348. Additionally, and irrespectively of production change also change of the middle section of the part numbers from 5 digits to 6 digits (also for PhMKDg triangular capacitors). Part numbers/series affected: Blatna/CZ plant:… download now
2024_PCN-EC-001-2024-Rev0-VERSION-37328.pdf Product Group: EC/Tue Feb 6, 2024/PCN-EC-001-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 VISHAY ESTA Tubular Power Electronic Capacitors (PEC): Transition of Production from Blatna/CZ to Loni/India and Change of Part Numbers For further information, please contact your regional Vishay office. Description of Change: Transition of the production of Tubular Power Electronic Capacitors from Blatna/CZ to Loni/IN (Exception: capacitors with film/foil design and ACMKP snubber capacitors) Additionally change of the middle section of the part numbers from 5 digits to 6 digits Reason for Change: Streamlining of production Expected Influence on Quality/Reliability/Performance: The capacitors will be produced on a line, with the same quality checks and same specification. Therefore no difference in… download now
2024_PCN-DR-00011-2024-Rev0-VERSION-45118.pdf Product Group: DR/Fri Jun 21, 2024/PCN-DR-00011-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 WSL2512/WSL2512-18/WSLP2512 Addition of Manufacturing Site for Automotive (Las Torres) For further information, please contact your regional Vishay office. Description of Change: Juarez Mexico (Las Torres facility) is being added as an additional manufacturing location. Production will continue in the existing locations in Columbus NE USA, Juarez Mexico (Bermudez #1 facility), and Beer-Sheva Israel. This will increase total production capacity to reduce lead time and support greater production flexibility. Reason for Change: Due to anticipated market expansion and increasing sales volume, manufacturing is being expanded in Juarez, Mexico. The Las Torres location is ISO9001 and IATF16949 certified and… download now
2024_PCN-DR-00010-2024-Rev0-VERSION-43914.pdf Product Group: DR/Wed Jun 19, 2024/PCN-DR-00010-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 CRMA Top Coat Material Change For further information, please contact your regional Vishay office. Description of Change: Top coat supplier has issued an end of life for the top coat material. Ally Top coat has been chosen as a replacement. Reason for Change: The company that provided the top coat material has issued an end of life for the coating. A new supplier was found so that supply of CRMA product would not be affected. Qualification data has been processed to ensure that the parts being delivered are of the same quality and are available upon request. Expected Influence on Quality/Reliability/Performance: No effect will be had on quality, reliability, or performance. Part Numbers/Series/Families… download now
2024_PCN-DR-00009-2024-Rev0-VERSION-41743.pdf Product Group: DR/Tue May 21, 2024/PCN-DR-00009-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 RCWL Top Coat Material Change For further information, please contact your regional Vishay office. Description of Change: RCWL Top coat supplier has issued an end of life for the top coat material. Ally Top coat has been chosen as a replacement. Reason for Change: The vendor that provided the top coat material has issued an end of life for the coating. A new vendor was found so that supply of RCWL product would not be affected. Qualification data has been processed to ensure that the parts being delivered and is available upon request. Expected Influence on Quality/Reliability/Performance: No effect will be had on quality, reliability, or performance. Part Numbers/Series/Families Affected: RCWL* Vishay… download now
2024_PCN-DR-00005-2024-Rev0-VERSION-42535.pdf Product Group: DR/Fri May 31, 2024/PCN-DR-00005-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 CMF Industrial CMF50, CMF55, CMF60, CMF65, CMF07, and CMF20. For further information, please contact your regional Vishay office. Description of Change: This only applies to the Industrial components only. Change of manufacturing location and component specifications. Changes may include, but are not limited to the following: Tolerances, Temperature, Values, TCR, Operating Voltages, Component Color, and mechanical specifications. All options will now only be lead (Pb) free. Please refer to the attached tables for changes and data sheet for specifications. Reason for Change: Increase manufacturing efficiency and streamline production for enhanced output. Expected Influence on… download now
2024_PCN-DR-00002-2024-Rev0-VERSION-44632.pdf Product Group: DR/Fri Jun 21, 2024/PCN-DR-00002-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 WSL,WSL-18,WSLP, WSLP-18, and WSKx Addition of Single Pass Coating For further information, please contact your regional Vishay office. Description of Change: The current process used to coat WSL/WSK surface mount devices involves a two-pass system using transfer coating for the bottom and then the top of the product. This PCN is to inform customers that Vishay has also added a single pass system that will also utilize a laser ablation process to remove excess coating from the terminals to increase the precision of the coating boundaries. Reason for Change: To enhance the visual/cosmetic quality of the coated parts. Expected Influence on Quality/Reliability/Performance: No change in form / fit /… download now
2024_PCN-DI-00655-2024-Rev0.pdf Product Group: DI/Wed Sep 25, 2024/PCN-DI-00655-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Production Site Addition and Part Marking Change for SMT Oscillators and Low- Profile Crystals For further information, please contact your regional Vishay office. Description of Change: Vishay Inductors Division is pleased to announce the addition of a new production site for existing parts to maintain stable supply to our customers. In addition to the new factory location, the part marking will also change on the Surface Mount Oscillators and Low-Profile Holder Type Crystal Units (more info on following pages). The part construction and performance will remain the same; only the part marking will change to align with the part numbering system. The newly added factory: Hefei, Anhui Province, China… download now
2024_PCN-DI-00639-2024-Rev0.pdf Product Group: DI/Thu May 16, 2024/PCN-DI-00639-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Dimensional Change for IHCM-2321AA-10 Common Mode Choke For further information, please contact your regional Vishay office. Description of Change: The maximum part height (B dimension on datasheet) is increasing slightly. Additionally, the tolerance on the wire diameter (C dimension) is changing from +/-0.2 to +/-0.3mm. Please see subsequent pages for more details. The IHCM-2321AA-10 series datasheet is being updated immediately, but changes will not go into effect until the date listed below. Reason for Change: Optimize production and better align datasheet values and part dimensions with process capabilities Expected Influence on Quality/Reliability/Performance: None Part Numbers/Series/Families… download now
2024_PCN-DD-040-2023-Rev0.pdf Product Group: DD/Fri Dec 22, 2023/PCN-DD-040-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Top Lead frame Dimensions Change for LVB15/25 For further information, please contact your regional Vishay office. Description of Change: Vishay Diodes Division is announcing of changing top lead frame dimensions and the shape is also being modified from square to round for Bridge Rectifier LVB1560-M3 and LVB2560-M3, please refer to annex 1 for the detail description. There is no change in form, fit and function in customer’s application. Upon the approval of this PCN, all future customized part numbers on the same products will be applied the same change accordingly. Reason for Change: Process consolidation and capacity expansion Expected Influence on Quality/Reliability/Performance: No change in… download now
2024_PCN-DD-039-2023-Rev0.pdf Product Group: DD/Fri Dec 22, 2023/PCN-DD-039-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Change of silicon wafer and package material of Small Signal & ESD Diodes in SOT-23 and SOD-123 packages For further information, please contact your regional Vishay office. Description of Change: The Silicon Wafer Diameter of certain part numbers will change from 4 Inch (100mm) to 6 Inch (150mm) and the frontend manufacturing process will be adapted to 6 Inch lines which includes changes in chip design, diffusion and doping technology. With this PCN the affected partnumbers will also be converted to AuPdCu / PdCu bonding wires (instead of currently used Au wires) with wafer front metal thickness being increased accordingly. The Alloy 42 leadframe will be plated with thicker copper layer over whole… download now
2024_PCN-DD-036-2024-Rev0.pdf Product Group: DD/Fri Nov 15, 2024/PCN-DD-036-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Additional In-House Backend Assembly Site for Industrial and Automotive Rectifiers in SMA, SMB and SMC Package For further information, please contact your regional Vishay office. Description of Change: To support BCP (Business Continuity Program), Vishay Diodes Division is introducing an additional in-house back-end manufacturing site for products in SMA, SMB and SMC package. This new assembly site is located in Kaohsiung, Taiwan. There is no change in form, fit and function on all involved part numbers. Reason for Change: Capacity expansion and Risk management Expected Influence on Quality/Reliability/Performance: No change in quality and reliability performance Part Numbers/Series/Families Affected:… download now
2024_PCN-DD-035-2024-Rev0.pdf Product Group: DD/Tue Nov 12, 2024/PCN-DD-035-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Fred Pt® 200V wafers photomasking changes For further information, please contact your regional Vishay office. Description of Change: Vishay Semiconductors is implementing some changes in the photo-masking deposition process steps, in order to consolidate and harmonize the manufacturing flows in the Wafer Fab. As a result, the relevant change is the introduction of die corner plugs on wire bondable top metal chips (See Annex 1). This front-end process consolidation was already introduced before through PCN-DD-036-2022. Die sizes and active areas will not change and the affected products will remain fully compliant to the existing datasheets. Reason for Change: Process consolidation to optimize production… download now
2024_PCN-DD-033-2024-Rev0.pdf Product Group: DD/Mon Nov 4, 2024/PCN-DD-033-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Alternate source for Ag disk used in the construction of 19mm Alloy diode for DO-9 For further information, please contact your regional Vishay office. Description of Change: Vishay Diode Division qualified a new silver disk (AgCu) needed for the 19mm alloy diode construction used in DO-9 products, to replace the existing silver disk (AgCuGeAr) which was suddenly discontinued by the supplier. This PCN does not change the termination status of the part numbers mentioned in PTN-DD-006-2023, but its purpose is to allow the fulfillment of “last-time buy” orders for the products. Reason for Change: Security of supply chain Expected Influence on Quality/Reliability/Performance: There will be no effect on… download now
2024_PCN-DD-031-2024-Rev0.pdf Product Group: DD/Fri Oct 4, 2024/PCN-DD-031-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Additional Wafer Fab Site Qualification For further information, please contact your regional Vishay office. Description of Change: To secure the supply chain for our customers, Vishay Semiconductors announces the qualification of an additional Wafer Fab for some Part Numbers. Reason for Change: Capacity increase and supply chain security. Expected Influence on Quality/Reliability/Performance: There will be no effect on product quality, reliability or performance. Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Semiconductors Time Schedule: Start Shipment Date: Wed Apr 2, 2025 Sample Availability: Samples available upon request Product… download now
2024_PCN-DD-030-2024-Rev0.pdf Product Group: DD/Tue Oct 1, 2024/PCN-DD-030-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 8 inch Wafer for TMBS Commercial Grade Products For further information, please contact your regional Vishay office. Description of Change: In addition to the existing 6-inch wafer source, Vishay Diodes Division will incorporate an 8-inch wafer in-house production line within the same manufacturing plant located in Taiwan. This consolidation is aimed at expanding our capacity in producing commercial grade TMBS (Trench MOS Barrier Schottky) products. As part of this integration, the top metal of the TMBS 8-inch solderable wafer will utilize Ti/Ni/Ag, aligning with the top metal used in the planar Schottky wafers. Additionally, the polyimide coating process on the 8-inch wafer platform will follow the same… download now
2024_PCN-DD-029-2024-Rev0.pdf Product Group: DD/Tue Oct 1, 2024/PCN-DD-029-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 8 inch Wafer for Automotive Grade Solderable TMBS For further information, please contact your regional Vishay office. Description of Change: In addition to the existing 6-inch wafer source, Vishay Diodes Division will incorporate an 8-inch wafer production line within the same manufacturing plant located in Taiwan. This consolidation is aimed at expanding our capacity in producing automotive-grade TMBS (Trench MOS Barrier Schottky) rectifiers, specifically in SMA, SlimDPAK, FlatPAK5x6, MicroSMP, SMPA, SMPD, SlimSMA, SlimSMAW packages. As part of this integration, the top metal of the TMBS 8-inch solderable wafer will utilize Ti/Ni/Ag, aligning with the top metal used in the planar Schottky wafers.… download now
2024_PCN-DD-028-2024-Rev1.pdf Product Group: DD/Wed Sep 25, 2024/PCN-DD-028-2024-REV-1 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Additional In-House Backend Assembly Site for ESD, Zener, TVS and Rectifier Products in SMF Package For further information, please contact your regional Vishay office. Description of Change: Vishay Diodes Division is introducing an additional in-house manufacturing location for SMF (Case Outline: DO-219AB) in Tianjin, China. Among the affected part numbers, SL02 & SL03-GS08 & GS18 will be converted to “solder clip” assembly technology and also added to SMF production in Kaohsiung, Taiwan as they were not mentioned in previously released PCN-DD-011-2023 & PCN-DD-012-2023. Furthermore, the label size, plastic reels and packing method will be consolidated to the existing norm and standard for surface mount… download now
2024_PCN-DD-024-2024-Rev0-VERSION-48168.pdf Product Group: DD/Tue Aug 13, 2024/PCN-DD-024-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Additional Wafer Fab Location for Commercial Grade Standard Rectifier in SMPD For further information, please contact your regional Vishay office. Description of Change: In addition to the existing in-house wafer source in Heilbronn, Germany; Vishay Diodes Division is introducing an additional internal wafer source located in Taiwan for commercial grade standard rectifiers in SMPD package. Upon the approval of this PCN, all future and customized part number for related product in the same package will adopt the same change. Reason for Change: Capacity expansion Expected Influence on Quality/Reliability/Performance: No change in quality and reliability performance Part Numbers/Series/Families Affected:… download now
2024_PCN-DD-023-2024-Rev0-VERSION-47902.pdf Product Group: DD/Fri Aug 9, 2024/PCN-DD-023-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Additional external assembly and final test site for Small Glass Diodes in DO-35, DO-41, MiniMELF, MicroMELF, QuadroMELF and DO-213AB Packages For further information, please contact your regional Vishay office. Description of Change: In addition to the existing in-house production, Vishay Diodes Division is introducing Subcontractors in China for assembly and final test of Small Signal Glass Diodes. There is no change of already running wafer sources and no change of POD included in this PCN . The Visual appearance (colour of body, marking and taping reel) as well as inner/outer carton box dimensions will be slightly different, in line with market standards. Reason for Change: Capacity expansion and… download now
2024_PCN-DD-022-2024-Rev0-VERSION-47579.pdf Product Group: DD/Fri Aug 9, 2024/PCN-DD-022-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Additional In-House Backend Assembly Site for Industrial and Automotive ESD Protection Diodes and Commercial Schottky in CLP Package For further information, please contact your regional Vishay office. Description of Change: To support BCP (Business Continuity Program), Vishay Diodes Division is introducing an additional in-house back-end manufacturing site for Commercial, Industrial and Automotive Grade products in CLP package. This assembly site is located in Tianjin, China. There is no change in form, fit and function on all involved part numbers. Reason for Change: Capacity expansion. Expected Influence on Quality/Reliability/Performance: No change in quality, reliability and performance. Part… download now
2024_PCN-DD-021-2024-Rev0-VERSION-47342.pdf Product Group: DD/Tue Aug 6, 2024/PCN-DD-021-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Additional In-House assembly & final test Site for Rectifiers in SMF (DO-219AB) Package For further information, please contact your regional Vishay office. Description of Change: Vishay Diodes Division is introducing an additional in-house back-end manufacturing site for products in SMF package (Case Outline: DO-219AB). This assembly site is located in Vishay`s Tianjin, China factory. There is no change in form, fit and function on all involved part numbers that are not changing with this PCN. Reason for Change: Capacity expansion and risk management. Expected Influence on Quality/Reliability/Performance: No change in quality and reliability performance. Part Numbers/Series/Families Affected: Please see… download now
2024_PCN-DD-020-2024-Rev0-VERSION-46989.pdf Product Group: DD/Mon Aug 5, 2024/PCN-DD-020-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Additional In-House Backend Assembly Site for Automotive Grade Zener, Schottky and ESD Products in SMF(DO-219AB) Package For further information, please contact your regional Vishay office. Description of Change: Vishay Diodes Division is introducing an additional in-house back-end manufacturing site for Automotive Grade products in SMF package (Case Outline: DO-219AB). This assembly site is located in Kaohsiung, Taiwan. In addition, the label size, plastic reels and packing method will be consolidated to the SMF (DO219AB) manufacturing standard implemented for surface mount packages in the new location, please refer to annex 1 for change view. There is no change in form, fit and function on all involved… download now
2024_PCN-DD-019-2024-Rev0-VERSION-45902.pdf Product Group: DD/Mon Jul 8, 2024/PCN-DD-019-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Alternate source for silver disk used in the construction of 14.6mm Alloy diode for DO-8. For further information, please contact your regional Vishay office. Description of Change: Vishay Diodes Division qualified a new silver disk (Ag-Cu) needed for the 14.6mm alloy diode construction used in DO-8 products, to replace the existing silver disk (Ag-Cu-Ge-Ar) which was suddenly discontinued by the supplier. Reason for Change: Security of supply chain Expected Influence on Quality/Reliability/Performance: There will be no effect on product quality, reliability, or performance. Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Semiconductors Time… download now
2024_PCN-DD-018-2024-Rev0-VERSION-45791.pdf Product Group: DD/Thu Jul 4, 2024/PCN-DD-018-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Implementation of laser marking for some Power Modules For further information, please contact your regional Vishay office. Description of Change: Product marking method will move from INK marking to LASER marking. There will be no change on the part marking information printed on the modules (see Annex 1). Reason for Change: Continuous improvement of marking method by means of increased marking permanency. Expected Influence on Quality/Reliability/Performance: There will be no effect on product quality, reliability or performance. Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Semiconductors Time Schedule: Start Shipment Date: Tue Dec 31,… download now
2024_PCN-DD-017-2024-Rev0-VERSION-43637.pdf Product Group: DD/Tue Jun 11, 2024/PCN-DD-017-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 8 inch Wafer for Planar Schottky Automotive Grade Products in MicroSMP and SMA packages For further information, please contact your regional Vishay office. Description of Change: In addition to the existing 6-inch wafer source, Vishay Diodes Division will incorporate an 8-inch wafer production line within the same manufacturing plant located in Taiwan. This consolidation is aimed at expanding our capacity in producing automotive-grade planar Schottky rectifiers, specifically in MicroSMP and SMA packages. Furthermore, as part of this integration, we are introducing a consolidation to our polyimide coating process for the 90V and 100V Schottky rectifiers on the 8-inch wafer platform. The coating process… download now
2024_PCN-DD-016-2024-Rev0-VERSION-42438.pdf Product Group: DD/Fri May 31, 2024/PCN-DD-016-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 8 inch Wafer for Planar Schottky Commercial Grade Products For further information, please contact your regional Vishay office. Description of Change: In additional to the existing 6 inch wafer source, Vishay Diodes Division will introduce additional 8 inch In house wafer source in Taiwan for planar schottky commercial grade products. Besides this wafer diameter change, the 100V Schottky 8 inch wafer polyimide coating method will be changed from screen printing to photo process for process consolidation. The 8 inch wafers have been qualified to meet our specification and performance standards. There will be no change in form, fit and function on all affected products. Upon the approval of this PCN, all… download now
2024_PCN-DD-015-2024-Rev0-VERSION-42098.pdf Product Group: DD/Tue May 28, 2024/PCN-DD-015-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Assembly relocation of isoCink® Power Bridge Rectifier For further information, please contact your regional Vishay office. Description of Change: To comply with the local city construction policy in China, the back-end assembly location of Vishay isoCink® Power Bridge Rectifiers will move from Suzhou to Suqian in Jiangsu, China. The solder paste as well as molding compound are consolidated to material of similar specs used already in other Bridge Rectifier products. There is no change in form, fit and function of all the affected products. Upon the approval of this PCN, all future and customized part number for related product in the same package will adopt the same change. Reason for Change: Delivery… download now
2024_PCN-DD-014-2024-Rev0-VERSION-41664.pdf Product Group: DD/Mon May 20, 2024/PCN-DD-014-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Additional In-House Backend Assembly Site for Commercial Rectifiers in SMF Package For further information, please contact your regional Vishay office. Description of Change: Vishay Diodes Division is introducing an additional in-house back-end manufacturing site for commercial products in SMF package (Case Outline: DO-219AB). This assembly site is locating in Kaohsiung, Taiwan. In addition, the label size, plastic reels and packing method will be consolidated to the same as now implementing for surface mount packages in the new location, please refer to annex 1 for change view. There is no change in form, fit and function on all involved part numbers. Upon the approval of this PCN, all future and… download now
2024_PCN-DD-013-2024-Rev0-VERSION-41527.pdf Product Group: DD/Mon May 13, 2024/PCN-DD-013-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Additional In-house Backend Assembly Site for MTP For further information, please contact your regional Vishay office. Description of Change: Vishay Semiconductors is introducing an additional in-house back-end manufacturing site for diodes in MTP package to support customers’ demand. There is no change in form, fit and function on all involved part numbers. Reason for Change: Capacity increase. Expected Influence on Quality/Reliability/Performance: There will be no effect on product quality, reliability or performance. Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Semiconductors Time Schedule: Start Shipment Date: Sat Nov 9, 2024 Sample… download now
2024_PCN-DD-012-2024-Rev0-VERSION-41059.pdf Product Group: DD/Tue Apr 30, 2024/PCN-DD-012-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Additional Wafer Foundry for Commercial Rectifier RS1/RS2/RS3 For further information, please contact your regional Vishay office. Description of Change: In addition to the existing in-house wafer source, Vishay Diodes Division is introducing an additional wafer manufacturing location in subcon, China for commercial grade high voltage SMA, SMB and SMC fast switching rectifiers. There will be no change in form, fit and function on all affected products. Upon the approval of this PCN, all future and customized part number for related product in the same package will adopt the same change. Reason for Change: Capacity expansion Expected Influence on Quality/Reliability/Performance: No change in quality and… download now
2024_PCN-DD-010-2024-Rev0-VERSION-40681.pdf Product Group: DD/Thu Apr 18, 2024/PCN-DD-010-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Additional In-House Backend Assembly Site for Commercial Grade Zener, Schottky and ESD Products in SMF(DO-219AB) Package For further information, please contact your regional Vishay office. Description of Change: Vishay Diodes Division is introducing an additional in-house back-end manufacturing site for Commercial Grade products in SMF package (Case Outline: DO-219AB). This assembly site is located in Kaohsiung, Taiwan. In addition, the label size, plastic reels and packing method will be consolidated to the SMF (DO219AB) manufacturing standard implemented for surface mount packages in the new location, please refer to annex 1 for change view. There is no change in form, fit and function on all involved… download now
2024_PCN-DD-006-2024-Rev0-VERSION-38573.pdf Product Group: DD/Thu Mar 14, 2024/PCN-DD-006-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Additional front-end sites and base for Pace-Pak For further information, please contact your regional Vishay office. Description of Change: To strengthen the supply chain, Vishay semiconductors announces the qualification of: - two additional external wafer fabs for diodes used into Pace-Pak. - an additional base for Pace-Pak with different surface finishing than the existing one (see Annex 1). There will be no change in product form, fit and function. Reason for Change: Capacity increase and supply chain security. Expected Influence on Quality/Reliability/Performance: There will be no effect on product quality, reliability or performance. Part Numbers/Series/Families Affected: Please see materials list… download now
2024_PCN-DD-005-2024-Rev0-VERSION-38348.pdf Product Group: DD/Tue Mar 5, 2024/PCN-DD-005-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Lead Frame Consolidation for Commercial Grade Uni-directional TransZorb® TVS in SMA and SMB Packages For further information, please contact your regional Vishay office. Description of Change: Vishay Diodes Division is announcing the lead frame consolidation for Commercial Grade Uni-directional TransZorb® TVS products in SMA package (Case Outline: DO-214AC) and SMB package (Case Outline: DO-214AA) that are manufactured at subcontractor in Shandong, China, to be identical with the lead frame used in Vishay in-house back-end manufacturing. There will be no change in form, fit and function on all affected products. Upon the approval of this PCN, all future and customized part number for related product in… download now
2024_PCN-DD-002-2024-Rev0-VERSION-36520.pdf Product Group: DD/Fri Feb 2, 2024/PCN-DD-002-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Additional In-House Backend Assembly Site for Commercial TVS Products in SMB Package For further information, please contact your regional Vishay office. Description of Change: Vishay Diodes Division is introducing an additional in-house back-end manufacturing site for Commercial Grade Transzorb® TVS in SMB package (Case Outline: DO-214AA). This assembly site is located in Kaohsiung, Taiwan and already has manufacturing experience in surface mount packaged products. There is no change in form, fit and function on all involved part numbers. Upon the approval of this PCN, all future and customized part number for related product in the same package will adopt the same change. Reason for Change: Capacity… download now
2024_PCN-DD-001-2024-Rev0-VERSION-36367.pdf Product Group: DD/Wed Jan 31, 2024/PCN-DD-001-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Manufacturing Location Change for PAR® TVS Products in DO-218AC Package For further information, please contact your regional Vishay office. Description of Change: Vishay Diodes Division is transferring the assembly & final test location of PAR® TVS products in DO-218AC package from Vishay Tianjin, China to Vishay Xi’an, China. In addition to the location change, the existing regular mold compound will be converted to halogen free mold compound due to End-of-Life notification of molding compound supplier. All other materials, process and controls are kept the same as the current production line in Vishay Tianjin. There is no change in form, fit and functions of the devices in customer applications,… download now
2024_PCN-DBR-00030-2024-Rev0.pdf Product Group: DBR/Sun Nov 10, 2024/PCN-DBR-00030-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Thick Film Chip Resistors Pb-free, RoHS compliant CRCW1206 e3, RCA1206 e3 and RCS1206 e3 series full backend capacity expansion For further information, please contact your regional Vishay office. Description of Change: Completion of the full backend process, from 1st breaking until final shipment, in Huizhou, China, as part of the chip resistors backend capacity expansion. There will be no change in product specification, product quality or part number. Reason for Change: To meet increasing demand of chip resistors, to increase flexibility and improve lead times, additional backend capacity in the new site will be utilized, supplementing to the existing capacity. Expected Influence on… download now
2024_PCN-DBR-00029-2024-Rev0.pdf Product Group: DBR/Sun Sep 22, 2024/PCN-DBR-00029-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Thick Film Chip Resistor CRCW2512 e3 Capacity Expansion within the ohmic range 10 Ohm up to 10 MOhm and Jumper (0 Ohm). Change of 8 mm pitch packaging to 4 mm packaging For further information, please contact your regional Vishay office. Description of Change: Manufacturing capacity of Thick Film Chip Resistor, CRCW2512 e3 series with lead free termination will be extended to Taiwan. 8 mm pitch packaging will be changed to 4 mm (market standard) packaging. There will be no change in part numbering, product specification and product quality. Reason for Change: Capacity increase and increasing supply flexibility Expected Influence on Quality/Reliability/Performance: None Part Numbers/Series/Families… download now
2024_PCN-DBR-00028-2024-Rev0.pdf Product Group: DBR/Sun Sep 22, 2024/PCN-DBR-00028-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Thick Film Chip Resistor CRCW1210 e3 and CRCW2010 e3 Capacity Expansion within the ohmic range 10 Ohm up to 10 MOhm and Jumper (0 Ohm) For further information, please contact your regional Vishay office. Description of Change: Manufacturing capacity of Thick Film Chip Resistor, CRCW1210 e3 and CRCW2010 e3 series with lead free termination will be extended to Taiwan. There will be no change in product specification, product quality and part number. Reason for Change: Capacity increase and increasing supply flexibility Expected Influence on Quality/Reliability/Performance: None Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Time… download now
2024_PCN-DBR-00027-2023-Rev0.pdf Product Group: DBR/Thu Dec 21, 2023/PCN-DBR-00027-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Back-end capacity expansion China for case size 0402 and 0603 of MC PROF (Datasheet Document Number: 28705) and MC PREC (Datasheet Document Number: 28700) with special code 0S For further information, please contact your regional Vishay office. Description of Change: Introduction of the back-end process, from 1st breaking until final shipment, in Huizhou, China, as part of the chip resistors back-end capacity expansion. There will be no change in product specification, product quality or part number. Reason for Change: To meet increasing demand of thin-film chip resistors, to increase flexibility and improve lead times, additional thin-film chip resistor back-end capacity will be installed in an… download now
2024_PCN-DBR-00026-2024-Rev0-VERSION-48499.pdf Product Group: DBR/Wed Aug 28, 2024/PCN-DBR-00026-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Introduction of a halogen-free topcoat for the TNPU e3 series. For further information, please contact your regional Vishay office. Description of Change: Topcoat color changes from blue to green. Before: topcoat containing halogens. After: topcoat is halogen free. The start shipment date indicates the date from when mixed product shipments will be possible during the transition period. No mix of components with different top coats on a single reel. Reason for Change: adding TNPU e3 series to our vast "GREEN" product portfolio Expected Influence on Quality/Reliability/Performance: no influence on form / fit / function Part Numbers/Series/Families Affected: Please see materials list on the succeeding… download now
2024_PCN-DBR-00025-2024-Rev0-VERSION-47115.pdf Product Group: DBR/Tue Aug 6, 2024/PCN-DBR-00025-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Sulfur Resistant Thick Film Chip Resistors Pb-free, RoHS compliant RCA0402 e3 and RCA0603 e3 series full backend capacity expansion For further information, please contact your regional Vishay office. Description of Change: Completion of the full backend process, from 1st breaking until final shipment, in Huizhou, China, as part of the chip resistors backend capacity expansion. There will be no change in product specification, product quality or part number. Reason for Change: To meet increasing demand of chip resistors, to increase flexibility and improve lead times, additional backend capacity in the new site will be utilized, supplementing to the existing capacity. Expected Influence on… download now
2024_PCN-DBR-00023-2024-Rev0.pdf Product Group: DBR/Mon Jun 24, 2024/PCN-DBR-00023-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Introduction of total lead free contacts for ACAS standard series. For further information, please contact your regional Vishay office. Description of Change: Before: inner terminals containing Pb according RoHS exemption 7c-I. After: different material used for inner terminals without Pb content. The start shipment date indicates the date from when mixed product shipments will be possible during the transition period. No mix of components using RoHS exemption 7c-I and total lead free components on a single reel. Reason for Change: adding ACAS series to our vast completely lead-free product portfolio Expected Influence on Quality/Reliability/Performance: no influence on form / fit / function. Part… download now
2024_PCN-DBR-00023-2023-Rev0.pdf Product Group: DBR/Thu Dec 21, 2023/PCN-DBR-00023-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Back-end capacity expansion China for case size 0402 and 0603 of MC PROF (Datasheet Document Number: 28705) and MC PREC (Datasheet Document Number: 28700) series For further information, please contact your regional Vishay office. Description of Change: Introduction of the back-end process, from 1st breaking until final shipment, in Huizhou, China, as part of the chip resistors back-end capacity expansion. There will be no change in product specification, product quality or part number. Reason for Change: To meet increasing demand of thin-film chip resistors, to increase flexibility and improve lead times, additional thin-film chip resistor back-end capacity will be installed in an existing plant… download now
2024_PCN-DBR-00022-2024-Rev0.pdf Product Group: DBR/Mon Jun 10, 2024/PCN-DBR-00022-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Marking Removal and change of inner contact for Pb-bearing TNPW series. For further information, please contact your regional Vishay office. Description of Change: Removal of resistance value marking for lead bearing TNPW series. Change of contact design of the inner terminal from two (Ag and Au) layers to one (AgPd alloy) layer for lead bearing TNPW series. The established and well-acknowledged lead-bearing electroplating will not be changed. Mixed product shipments will be possible during the transition period. No mix of components with old and new status on a single reel. Reason for Change: Optimization of production process. Expected Influence on Quality/Reliability/Performance: no influence on… download now
2024_PCN-DBR-00012-2024-Rev0.pdf Product Group: DBR/Thu Sep 26, 2024/PCN-DBR-00012-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Back-end capacity expansion China for case sizes 0402 and 0603 thin film chip resistor series MC AT and TNPW e3 For further information, please contact your regional Vishay office. Description of Change: Introduction of the back-end process, from 1st breaking until final shipment, in Huizhou, China, as part of the chip resistors back-end capacity expansion. There will be no change in product specification, product quality, part number, or country of origin. Front-end support will be from Germany or Israel respectively. Reason for Change: To meet increasing demand of thin-film chip resistors, to increase flexibility and improve lead times, additional thin-film chip resistor back-end capacity will be… download now
2024_PCN-DBR-00010-2024-Rev0-VERSION-39824.pdf Product Group: DBR/Thu Mar 28, 2024/PCN-DBR-00010-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Discontinuation of Resistance Value Marking for Lead (Pb)-bearing Thick Film Chip Resistors D/CRCW, CRCW-xx and RCA For further information, please contact your regional Vishay office. Description of Change: Discontinuation of resistance value marking for Lead (Pb)-bearing Thick Film Chip Resistors in 0603 to 2512 size. Reason for Change: Optimization of production process Expected Influence on Quality/Reliability/Performance: None Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Time Schedule: Start Shipment Date: Tue Sep 24, 2024 Sample Availability: Samples available from May 1st, 2024, non-specific resistance value and case size… download now
2024_PCN-DBR-00009-2024-Rev0-VERSION-38862.pdf Product Group: DBR/Mon Mar 18, 2024/PCN-DBR-00009-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Anti-Surge and Pulse Proof, High Power Thick Film Chip Resistors RCS0402 e3, RCS0603 e3, CRCW0402-HP e3 and CRCW1206-HP e3 full backend capacity expansion For further information, please contact your regional Vishay office. Description of Change: Completion of the full backend process, from 1st breaking until final shipment, in Huizhou, China, as part of the chip resistors backend capacity expansion. There will be no change in product specification, product quality or part number. Reason for Change: To meet increasing demand of chip resistors, to increase flexibility and improve lead times, additional backend capacity in the new site will be utilized, supplementing to the existing capacity. Expected… download now
2024_PCN-DBR-00008-2024-Rev0-VERSION-38530.pdf Product Group: DBR/Thu Mar 7, 2024/PCN-DBR-00008-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 High Voltage Thick Film Chip Resistors RCV1206 e3 full backend capacity expansion For further information, please contact your regional Vishay office. Description of Change: Completion of the full backend process, from 1st breaking until final shipment, in Huizhou, China, as part of the chip resistors backend capacity expansion. There will be no change in product specification, product quality or part number. Reason for Change: To meet increasing demand of chip resistors, to increase flexibility and improve lead times, additional backend capacity in the new site will be utilized, supplementing to the existing capacity. Expected Influence on Quality/Reliability/Performance: None Part… download now
2024_PCN-DBR-00003-2024-Rev0.pdf Product Group: DBR/Thu Jan 25, 2024/PCN-DBR-00003-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Introduction of total lead free contact paste for MC PREC (Datasheet Document Number: 28700) series and for the majority of MC PROF (Datasheet Document Number: 28705) series. For further information, please contact your regional Vishay office. Description of Change: Before: contact paste contains Pb according RoHS exemption 7c-I. After: new contact paste without Pb content. The start shipment date indicates the date from when mixed product shipments will be possible during the transition period. No mix of components using RoHS exemption 7c-I and total lead free components on a single reel. On Nov. 1st 2024 customers will be informed about the exact date of transition period ending, when only total… download now
2024_PCN-CC-00003-2024-Rev0.pdf Product Group: CC/Mon Jan 22, 2024/PCN-CC-00003-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Change of epoxy coating - Automotive leaded MLCC (K...V and K...R series) For further information, please contact your regional Vishay office. Description of Change: We will change the epoxy coating of the automotive leaded MLCC K...V and K...R series. Parts with new epoxy coating will be sent starting April 2025. The color of the epoxy will change from yellow to black. There will be no change in form/fit/function. Reason for Change: Obscolesence of the current epoxy from April 2025 on. Expected Influence on Quality/Reliability/Performance: Quality/Reliability/Performance will stay the same - no influence Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay… download now
2024_PCN-CC-00002-2024-Rev0.pdf Product Group: CC/Mon Jan 22, 2024/PCN-CC-00002-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Change of epoxy coating - Industrial leaded MLCC (A series) For further information, please contact your regional Vishay office. Description of Change: We will change the epoxy coating of the industrial leaded MLCC A series. Parts with new epoxy coating will be sent starting April 2025. The color of the epoxy will change from yellow to blue. There will be no change in form/fit/function. Reason for Change: Obscolesence of the current epoxy from April 2025 on. Expected Influence on Quality/Reliability/Performance: Quality/Reliability/Performance will stay the same - no influence Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay BCcomponents… download now
2024_PCN-CC-00001-2024-Rev0.pdf Product Group: CC/Mon Jan 22, 2024/PCN-CC-00001-2024-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Change of epoxy coating - Industrial leaded MLCC (K series) For further information, please contact your regional Vishay office. Description of Change: We will change the epoxy coating of the industrial leaded MLCC K series. Parts with new epoxy coating will be sent starting April 2025. The color of the epoxy will change from yellow to black. There will be no change in form/fit/function. Reason for Change: Obscolesence of the current epoxy from April 2025 on. Expected Influence on Quality/Reliability/Performance: Quality/Reliability/Performance will stay the same - no influence Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay BCcomponents… download now
2024_PCN-025_2024_0-OMTS24001T.pdf PCN-025_2024 _0-OM TS24001T Page 1/5 Product Change Notification Sofia , 05 th April 2024 PCN-0 25_20 24_0-OMT S24001T Production location change HO and HO -P series Based on the JEDEC Standard JESD46 standard (latest release), please kindly provide your approval for below change within 30 days. Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on HO and HO-P series . Concerned products : HO 11.5- NP-0000; HO 11.9- NP-0000; HO 15- NP-0000 ; HO 15- NP/SP33 -1000; HO 15- NSM-0000; HO 15 -NSM -0000 T&R ; HO 25- NP-0000 ; HO 25- NP/SP33 -1000; HO 25- NPPR; HO 25- NSM-0000; HO 25 -NSM -0000 T&R HO 25- NSM/SP30 -1000; HO 25- NSM/SP33 -1000; HO 30- NP/SPG13 -3205; HO 30- NP/SPG14 -2004; HO 30- NP/SPG15 -3205; HO 37.5- NP/SPG13 -3205; HO 8 -NP -0000; HO 8-NP/SP33 -1000; HO 8 -NSM -0000; HO… download now
2024_OPT-1335-2024_PCB_based_0402_and_0603_ChipLEDs.pdf DESCRIPTION OF CHANGE : CLASSIFICATION OF CHANGE : REASON FOR CHANGE : EXPECTED INFLUENCE ON QUALITY PRODUCT CA TEGORY : VISHAY BRAND(s) : SAMPLES AVAILABLE BEGINNING : PRODUCT IDENTIFICA TION : QUALIFICATION DATA : Product Change Notification Product Group: Optoelectronics 03-JUN-2024 T ITLE : Standardization of Ma terials for PCB based 0402 and 0 603 ChipLEDs VISHA Y is standardizing the materials for the PCB-based 0402 and 0603 ChipLEDs. Details of the changes are described in the attached document. Bill of Material (Major) Standardization of the materials for PCB-based 0402 and 0603 ChipLEDs to ensure the availability of the materials and maintain long term delivery capability . There is no impact on Form/Fit and Function. The optical and electrical characteristics remain the same as before. There is no impact on product performance and reliability level. We still request the customers to test the parts in their applications. LEDs PART NUMBERS / SERIES / F AMILIES AFFECTED: LEDs /… download now
2024_OPT-1327-2024_VBP_VBPW_Series-Pre-plated_LF_change_Silver_paste_2nd_source.pdf download now
2024_LTB-Letter-DYNEX-IGBT_FRD.pdf Registered in England and Wales: No 3824626 Registered Office: Doddington Road, Lincoln, LN6 3LF, UK Dynex Semiconductor Ltd Doddington Road | Lincoln United Kingdom | LN6 3LF Tel: +44 (0) 1522 500500 Fax: +44 (0) 1522 500660 www.dynexsemi.com Date : 02 October 2024 Dear Sir/Madam, Final Buy of Products Detailed in Attached List : ( IGBT /FRD modules Suffix -x0xx & -xx0xx) Dynex Semiconductor Ltd. is committed to supplying leading edge technology products and pursues a continuous program of development in Power Semiconductor design and manufacture. As part of this program contin ual product strategy and manufacturing viability are assessed and from time to time it is necessary to cease manufacture of certain products. Accordingly, this letter is official notification that the above noted products are to be withdrawn from production and provide an opportunity for last time buy. The last date for receiving your final order will be the 23 rd December 2024 with final delivery before 30 th… download now
2024_Information_Terminal_Change_PS0030.pdf Vishay Electronic GmbH, Dr.-Felix -Zandman -Platz 1, 95100 Selb, Germany Phone (49) 9287 71 -0, Fax (49) 9287 70435 Amtsgericht/County Court Hof, HRB 1895 Geschäftsführer/Managing Directors: Martina Winterwerber Vorsitzender des Aufsichtsrats/Chairman of the Supervisory Board: Erich Schädlich 27 .08.2024 Dear valued customer, W ith this letter we inform , that we are chang ing the terminal of the PS0030* from the following t wo datasheets: www.vishay.com/doc ?22081 and www.vishay.com/doc ?22084 Affected are the parts that start with PS0030* , a li st of part num bers purchased in the past can be found in the end of this letter. There will be no effect on electrical properties or performance . Dimensional li mits from the datasheets are still valid. We need to take this step, as our current suppl ier for the terminals stopped the production on short noti ce . So in order to fulfill deliveries we need to change the terminal to a standard terminal that is used in our production already.… download now
2024_G24-01169_E.pdf download now
2024_G24-00943_E.pdf download now
2024_EE-PCN24039-HS-and-HSL-MOQ-Change.pdf Eaton Electronics Division 5735 W. Las Positas Blvd #100 Pleasanton, CA 94588 www.eaton.com/electronics 1 Product Change Noti ce PCN#: EE -PCN 24 039 10 /28/202 4 CLASSIFICATION OF CHANGE: MOQ (Minimum order quantity ) change on both HS and HSL series . Affected PNs are included in below table. DESCRIPTION OF CHANGE: Change the MOQ from MPQ (Minimum packing quantity) to a full carton box. Detailed packaging quantity changes before and after is as below. REASON FOR CHANGE: Better manage the cost and lead time . EXPECTED INFLUENCE ON QUALITY , RELIABILITY , AND PERFORMANCE : There is no effect on the quality, reliability, or performance of launched products. PARTS FAMILIES AFFECTED : Detailed affected 18 PNs are listed in the below table. Item Part Number MOQ (current) MOQ (new) Item Part Number MOQ (current) MOQ (new) 1 HS1016 -3R8306 -R 100 1200 10 HSL1016 -3R8306 -R 100 1200 2 HS1020 -3R8506 -R 100 1200 11 HSL1020 -3R8506 -R 100 1200 3 HS1025 -3R8706 -R 100 1200 12 HSL1025 -3R8706 -R… download now
2024_EE-PCN24011.pdf Eaton Electronics Division 5735 W. Las Positas Blvd #100 Pleasanton, CA 94588 www.eaton.com/ electronics Product Change Noti ce PCN#: EE -PCN 24011 March 6 , 2024 CLASSIFICATION OF CHANGE: Packaging DESCRIPTION OF CHANGE: Minimum order quantity and multiple changing from one (1) part to 32 parts. Individual parts will remain in cardboard boxes with foam internal. These boxes will be packaged in a wooden crate, instead of current plastic shrink wrap on a pallet. REASON FOR CHANGE: Elimi nate shipping damage. EXPECTED INFLUENCE ON QUALITY , RELIABILITY , AND PERFORMANCE : Improved shipping quality and elimination of damaged boxes and modules. PARTS FAMILIES AFFECTED : XLR -48R6167 -R XLR -48R6167 -1 XLR -51R3187 -R TIME SCHEDULE: Start Shipment Date: April 2024 Last Time Buy Date: N/A Last Time Shipment Date: N/A ISSUED BY: Global Product Manager : Jason Lee CONTACT INFORMATION : For questions or comments, please Contact us . download now
2024_EE-PCN23002_6125TD_End_of_Life.pdf F202D -02 PCN Rev 0 2/28/201 7 Eaton Electronics Division 5735 W. Las Positas Blvd #100 Pleasanton, CA 94588 www.eaton.com/electronics Product Change Noti ce PCN#: EE -PCN 2300 2 1/20/2023 CLASSIFICATION OF CHANGE: End of Life DESCRIPTION OF CHANGE: The 6125 TD fuse family has reached end of life. The recommended replacements are from Eaton’s 2410 TD fuse famil y REASON FOR CHANGE: To s treamline production and rationalize Eaton’s 2410 EIA (6125) time -delay fuse families . EXPECTED INFLUENCE ON QUALITY , RELIABILITY , AND PERFORMANCE : The 2410 TD fami ly is a time -delay that offers the same current ratings and similar time vs current opening performance compared to the 6215TD. The 2410TD also offers in increase in voltage rating of 250Vac. In addition, the 2410 TD and 6125TD have the same product dimensions. The recommended pad layout of the 2410TD is smaller than the 6125 TD; however, the 2 410TD can be accommodated on the same pad layout as the 6125 TD . Product dimension and pad… download now
2023_Weidmueller_technische_Aenderung_LM_3_5.pdf I I Umstellung auf Verpackungseinlagen in der Produktfamilie LM 3.5 Produktanpassungen dienen der kontinuierlichen Produkt - und / oder Prozessverbesserung. Die aufgeführten Artikel werden in einer modifizierten Version geliefert. Technische Änderungen: Die neuartige Verpackung enthält Tray -Inlays, die wiederum in bedruckte Weidmüller -Kartons eingelegt werden. Die Vorteile der sortierten Verpackung sind: • Vermeidung von Transportschäden und Sicherung eines hohen Qualitätsniveaus • Premiumverpackung ohne Preiserhöhung • Standardisierte Verpackungsgröße und dadurch leichteres Handling Aktuelle Version : Neue Version: Verfügbarkeit: Mit diesem Schreiben teilen wir Ihnen mit, dass die Änderu ng ab September 2023 umgesetzt wird. Bestellnummer n und Preis e pro 100 Stück werden nicht geändert. In unseren Logistikzentren werden teilweise Umverpackungen für den bestehenden Bestand vorgenommen, was zu einigen Anpassungen bei bestehenden Bestellungen führen kann. Sie werden in solchen Fällen… download now
2023_TSMF10x_PCN_OPT-1191-2021_Rev0_changes-and-memo.pdf M E M O R A N D U M Dear Customers, With regards to the PCN ( OPT -1191 -2021 Rev. 0 ), we would like to emphasize on some items . As mentioned in the PCN, - The Infrared emitter chip has been replaced, which lead to different characteristics like higher intensity and different emission angle - The device orientation (polarity) is changed - All the shipments after 01. May 2022 will have the new chip o The date code can be found on the label under Batch n umber o For the below example, its Year 2023, week 16 An overview of these changes is attached again for your quick comparison. We strong ly recommend you to test the device in your application before using it. Also, p lease refer to the datasheet from our webpage for all the changes. Thank you Best Regards Mohan Kumar Kannusamy Director, Product Marketing Sensors Vishay Semiconductor GmbH The resienstrasse 2 74072 Heilbronn Germany P +49 -7131 -7498 -607 E Mohankumar.kannusamy@vishay.com © 2020 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS… download now
2023_PTN-TF-00003-2023-Rev0.pdf Product Group: TF/Fri Jun 30, 2023/PTN-TF-00003-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 SFN 0.1% Tolerance Discontinuation Notice For further information, please contact your regional Vishay office. Description of Change: Discontinuation of 0.1% absolute resistor tolerance option for SFN part family Classification of Change: Resistor Part tolerance of 0.1% is no longer manufacturable with current process capability and material characteristics Expected Influence on Quality/Reliability/Performance: Going forward, best available absolute resistor tolerance performance will be 0.25% Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Electro-Films Time Schedule: Last Time Buy Date: Mon Dec 4, 2023 Last Time Ship Date: Mon Jun 3,… download now
2023_PTN-TF-00001-2023-Rev0.pdf Product Group: TF/Thu Mar 30, 2023/PTN-TF-00001-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Obsolescence of several L-NS series case sizes and gold (G and W) terminations For further information, please contact your regional Vishay office. Description of Change: Discontinuation of low activity case sizes 0508, 0612, and 1225. Discontinuation of the G and W termination for all case sizes. Removal of cage code 57489 from DLA drawings 02008, 02010, 03022, 12005, 12006, 12008, 12009, and 12010 Classification of Change: Due to the low activity of these items we cannot justify continued investment needed to continue to offer these products. Note, Vishay location cage code 2799A will continue to supply to the DLA drawings and is unaffected by this change. Expected Influence on… download now
2023_PTN-TC-005-2023-Rev0.pdf Product Group: TC/Tue Aug 29, 2023/PTN-TC-005-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Terminate manufacturing of T58W9476M6R3C0150 For further information, please contact your regional Vishay office. Description of Change: Vishay will discontinue production of T58W9476M6R3C0150. Reason for Change: Manufacturing of T58W9476M6R3C0150 is no longer cost effective. T58W9476M6R3C0200 part number is available for replacement. Expected Influence on Quality/Reliability/Performance: NO Part Numbers/Series/Families Affected: T58W9476M6R3C0150 Vishay Brand(S): Vishay Time Schedule: Last Time Buy Date: Mon May 27, 2024 Last Time Ship Date: Tue Aug 27, 2024 Sample Availability: Will be supported with T58W9476M6R3C0200 only Product Identification: N/A Qualification Data: N/A This PTN is considered… download now
2023_PTN-TC-005-2022-Rev0.pdf Product Group: TC/Tue Jan 3, 2023/PTN-TC-005-2022-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Discontinuation of M34 and M35 Series For further information, please contact your regional Vishay office. Description of Change: All M34 and M35 series capacitors will be discontinued due to lack of demand/sales. Classification of Change: The cost of dedicating and maintaining these products is no longer cost effective based on market demand. Expected Influence on Quality/Reliability/Performance: not applicable Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Time Schedule: Last Time Buy Date: Sun Jun 4, 2023 Last Time Ship Date: Thu Jan 4, 2024 Sample Availability: not applicable Product Identification: not applicable Qualification Data:… download now
2023_PTN-TC-004-2023-Rev1.pdf Product Group: TC/Tue Aug 29, 2023/PTN-TC-004-2023-REV-1 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Discontinuation of XTH, XTK, XTL, XTM, XTV Series For further information, please contact your regional Vishay office. Description of Change: All XTx series and DLA 04022 and 04033 drawing rating capacitors will be discontinued due to raw material supply reliability, its quality and equipment age. Reason for Change: Raw material procurement has become unreliable and problematic. The quality of such is also lacking. The manufacturing process is completely manual, and the equipment is decades old. Expected Influence on Quality/Reliability/Performance: N/A Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Sprague Time Schedule: Last Time Buy… download now
2023_PTN-TC-002-2023-Rev1.pdf Product Group: TC/Sun Feb 12, 2023/PTN-TC-002-2023-REV-1 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Terminate manufacturing of 298W107X0010Q2D, 298W107X0010Q4D, TL8A0107M010D For further information, please contact your regional Vishay office. Description of Change: Vishay will discontinue manufacturing of Tantalum capacitors 298W107X0010Q2D, 298W107X0010Q4D and TL8A0107M010D. Classification of Change: Mold packaging bulging. Part numbers 298W107X0010A2D, 298W107X0010A4D and TL8A2107M010D will be suggested as replacement. Expected Influence on Quality/Reliability/Performance: N/A Part Numbers/Series/Families Affected: 298W107X0010Q2D, 298W107X0010Q4D, TL8A0107M010D, Vishay Brand(S): Vishay Sprague Time Schedule: Last Time Buy Date: Sun Aug 13, 2023 Last Time Ship Date: Sun Feb 11, 2024 Sample… download now
2023_PTN-SIL-055-2023-Rev0.pdf Product Group: SIL/Mon Dec 4, 2023/PTN-SIL-055-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Product Obsolescence of Low-Voltage Commercial Power MOSFETs For further information, please contact your regional Vishay office. Description of Change: As a part of Vishay Siliconix commitment to Quality, this is a courtesy notification to you for an announcement of the end of life of the commercial Low Voltage MOSFETs. The part numbers be obsoleted possess legacy technology, and will be replaced by advanced products. Please be kindly noticed that, due to the discontinued manufacturing capability of the legacy products, there’s no LTB (Last-Time-Buy) nor LTS (Last- Time-Shipment) arranged. Meanwhile, there’s no sample of impacted products being provided because of the same reason. Reason for Change:… download now
2023_PTN-SIL-052-2023-Rev0.pdf Product Group: SIL/Mon Nov 27, 2023/PTN-SIL-052-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Conversion to Copper (Cu) Wire – SQ3427EV For further information, please contact your regional Vishay office. Description of Change: The affected part number listed in this notification will be converted to a Copper wire material set. The new ordering code is SQ3427CEV-T1_GE3, which has the exact same product performance and fit as SQ3427EV. There will be no change to the wafer fab or assembly location (Note: parts with _BE3 suffix will be consolidated to a single assembly location at Simconix). There will be no changes to the parameters on the datasheet (reference: SQ3427CEV Doc # 62369 Rev.B). Reason for Change: Standardization of materials Expected Influence on Quality/Reliability/Performance: None… download now
2023_PTN-SIL-051-2023-Rev0.pdf Product Group: SIL/Mon Nov 27, 2023/PTN-SIL-051-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Conversion to Copper (Cu) Wire – SQ3419EV For further information, please contact your regional Vishay office. Description of Change: The affected part number listed in this notification will be converted to a Copper wire material set. The new ordering code is SQ3419CEV-T1_GE3, which has the exact same product performance and fit as SQ3419EV. There will be no change to the wafer fab or assembly location (Note: parts with _BE3 suffix will be consolidated to a single assembly location at Simconix). There will be no changes to the parameters on the datasheet (reference: SQ3419CEV Doc # 62368 Rev.A). Reason for Change: Standardization of materials Expected Influence on Quality/Reliability/Performance: None… download now
2023_PTN-SIL-049-2023-Rev0.pdf Product Group: SIL/Mon Nov 27, 2023/PTN-SIL-049-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Conversion to Copper (Cu) Wire – SQ2361ES For further information, please contact your regional Vishay office. Description of Change: The affected part number listed in this notification will be converted to a Copper wire material set. The new ordering code is SQ2361CES-T1_GE3, which has the exact same product performance and fit as SQ2361ES. There will be no change to the wafer fab or assembly location (Note: parts with _BE3 suffix will be consolidated to a single assembly location at Simconix). There will be no changes to the parameters on the datasheet (reference: SQ2361CES Doc # 62350 Rev.B). Reason for Change: Standardization of materials Expected Influence on Quality/Reliability/Performance: None… download now
2023_PTN-SIL-048-2023-Rev0.pdf Product Group: SIL/Mon Nov 27, 2023/PTN-SIL-048-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Conversion to Copper (Cu) Wire – SQ2361AEES For further information, please contact your regional Vishay office. Description of Change: The affected part number listed in this notification will be converted to a Copper wire material set. The new ordering code is SQ2361CEES-T1_GE3, which has the exact same product performance and fit as SQ2361AEES. There will be no change to the wafer fab or assembly location (Note: parts with _BE3 suffix will be consolidated to a single assembly location at Simconix). There will be no changes to the parameters on the datasheet (reference: SQ2361CEES Doc # 62349 Rev.A). Reason for Change: Standardization of materials Expected Influence on… download now
2023_PTN-SIL-046-2023-Rev0.pdf Product Group: SIL/Wed Nov 29, 2023/PTN-SIL-046-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Product Obsolescence of Commercial Power MOSFETs in PolarPAK® Package For further information, please contact your regional Vishay office. Description of Change: Vishay Siliconix announces the end of life of the commercial Low-Voltage Power MOSFET products in PolarPAK® package. The part numbers be obsoleted possess legacy package technology, and will be replaced by advanced products. Reason for Change: Migration to advanced package technologies Expected Influence on Quality/Reliability/Performance: None Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Siliconix Time Schedule: Last Time Buy Date: Wed May 29, 2024 Last Time Ship Date: Fri… download now
2023_PTN-SIL-041-2023-Rev0.pdf download now
2023_PTN-SIL-040-2023-Rev0.pdf Product Group: SIL/Tue Aug 29, 2023/PTN-SIL-040-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Conversion to Copper (Cu) Wire – SQ2351ES For further information, please contact your regional Vishay office. Description of Change: The affected part number listed in this notification will be converted to a Copper wire material set. The new ordering code is SQ2351CES-T1_GE3, which has the exact same product performance and fit as SQ2351ES. There will be no change to the wafer fab or assembly location (Note: parts with _BE3 suffix will be consolidated to a single assembly location at Simconix). There will be no changes to the parameters on the datasheet (reference: SQ2351CES Doc # 62245 Rev.A). Reason for Change: Standardization of materials Expected Influence on Quality/Reliability/Performance: None… download now
2023_PTN-SIL-039-2023-Rev0.pdf Product Group: SIL/Tue Aug 29, 2023/PTN-SIL-039-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Conversion to Copper (Cu) Wire – SQ2309ES For further information, please contact your regional Vishay office. Description of Change: The affected part number listed in this notification will be converted to a Copper wire material set. The new ordering code is SQ2309CES-T1_GE3, which has the exact same product performance and fit as SQ2309ES. There will be no change to the wafer fab or assembly location (Note: parts with _BE3 suffix will be consolidated to a single assembly location at Simconix). There will be no changes to the parameters on the datasheet (reference: SQ2309CES Doc # 62211 Rev.A). Reason for Change: Standardization of materials Expected Influence on Quality/Reliability/Performance: None… download now
2023_PTN-SIL-033-2023-Rev0.pdf Product Group: SIL/Wed Jun 14, 2023/PTN-SIL-033-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Conversion to Copper (Cu) Wire – SQ4917EY For further information, please contact your regional Vishay office. Description of Change: The affected part number listed in this notification will be converted to a Copper wire material set. The new ordering code is SQ4917CEY-T1_GE3, which has the exact same product performance and fit as SQ4917EY. There will be no change to the wafer fab or assembly location (Note: parts with _BE3 suffix will be consolidated to single assembly location in China). There will be no changes to the parameters on the datasheet (reference: SQ4917CEY Doc #62019 Rev.C). Classification of Change: Standardization of materials Expected Influence on Quality/Reliability/Performance:… download now
2023_PTN-SIL-032-2023-Rev0.pdf Product Group: SIL/Wed Jun 14, 2023/PTN-SIL-032-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Conversion to Copper (Cu) Wire – SQ4401EY For further information, please contact your regional Vishay office. Description of Change: The affected part number listed in this notification will be converted to a Copper wire material set. The new ordering code is SQ4401CEY-T1_GE3, which has the exact same product performance and fit as SQ4401EY. There will be no change to the wafer fab or assembly location (Note: parts with _BE3 suffix will be consolidated to single assembly location in China). There will be no changes to the parameters on the datasheet (reference: SQ4401CEY Doc #62016 Rev.B) Classification of Change: Standardization of materials Expected Influence on Quality/Reliability/Performance: None… download now
2023_PTN-SIL-030-2023-Rev0.pdf Product Group: SIL/Wed Jun 14, 2023/PTN-SIL-030-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Conversion to Copper (Cu) Wire – SQ2348ES For further information, please contact your regional Vishay office. Description of Change: The affected part number listed in this notification will be converted to a Copper wire material set. The new ordering code is SQ2348CES-T1_GE3, which has the exact same product performance and fit as SQ2348ES. There will be no change to the wafer fab or assembly location (Note: parts with _BE3 suffix will be consolidated to single assembly location in China). There will be no changes to the parameters on the datasheet (reference: SQ2348CES Doc # 62082 Rev.A). Classification of Change: Standardization of materials Expected Influence on Quality/Reliability/Performance:… download now
2023_PTN-SIL-029-2023-Rev0.pdf Product Group: SIL/Tue Jun 13, 2023/PTN-SIL-029-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Conversion to Copper (Cu) Wire – SQ3456BEV For further information, please contact your regional Vishay office. Description of Change: The affected part number listed in this notification will be converted to a Copper wire material set. The new ordering code is SQ3456CEV-T1_GE3, which has the exact same product performance and fit as SQ3456BEV. There will be no change to the wafer fab or assembly location. There will be no changes to the parameters on the datasheet (reference: SQ3456CEV Doc # 62060 Rev.B). Classification of Change: Standardization of materials Expected Influence on Quality/Reliability/Performance: None Part Numbers/Series/Families Affected: SQ3456BEV-T1_GE3 Vishay Brand(S): Vishay… download now
2023_PTN-SIL-028-2023-Rev0.pdf Product Group: SIL/Tue Jun 13, 2023/PTN-SIL-028-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Conversion to Copper (Cu) Wire – SQ3426EV For further information, please contact your regional Vishay office. Description of Change: The affected part number listed in this notification will be converted to a Copper wire material set. The new ordering code is SQ3426CEV-T1_GE3, which has the exact same product performance and fit as SQ3426EV. There will be no change to the wafer fab or assembly location (Note: parts with _BE3 suffix will be consolidated to single assembly location in China). There will be no changes to the parameters on the datasheet (reference: SQ3426CEV Doc #62059 Rev.B). Classification of Change: Standardization of materials Expected Influence on Quality/Reliability/Performance:… download now
2023_PTN-SIL-015-2022-Rev0.pdf Product Group: SIL/Tue Jul 26, 2022/PTN-SIL-015-2022-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Conversion to Copper (Cu) Wire – SQS484EN For further information, please contact your regional Vishay office. Description of Change: The affected part number listed in this notification will be converted to a Copper wire material set. The new ordering code is SQS484CENW-T1_GE3, which has the exact same product performance and fit as SQS484EN-T1_GE3. In addition, the SQS484CENW-T1_GE3 package also includes pins with wet-able flanks. This feature promotes improved solder coverage and solder filet shape at the lead tips. The outer most dimensions are unchanged and the same PCB land pattern is required. There will be no change to the wafer fab or assembly location. There will be no changes to the… download now
2023_PTN-SIL-008-2023-Rev0.pdf Product Group: SIL/Tue Feb 14, 2023/PTN-SIL-008-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Conversion to Copper (Cu) Wire – SQ4840EY For further information, please contact your regional Vishay office. Description of Change: The affected part number listed in this notification will be converted to a Copper wire material set. The new ordering code is SQ4840CEY-T1_GE3, which has the exact same product performance and fit as SQ4840EY. There will be no change to the wafer fab or assembly location (Note: parts with _BE3 suffix will be consolidated to single assembly location in China). There will be no changes to the parameters on the datasheet (reference: SQ4840CEY Doc #62017 Rev.B). Classification of Change: Standardization of materials Expected Influence on Quality/Reliability/Performance:… download now
2023_PTN-SIL-000408-2023-Rev0.pdf Product Group: SIL/Tue Jul 4, 2023/PTN-SIL-000408-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 End of Life Notification for Vishay Siliconix SIC779 and SIC779A For further information, please contact your regional Vishay office. Description of Change: Vishay Siliconix announces the end of life of SIC779 and SIC779A Classification of Change: Obsolescence of IC Expected Influence on Quality/Reliability/Performance: N/A Part Numbers/Series/Families Affected: SIC779ACD-T1-GE3, SIC779CD-T1-GE3, Vishay Brand(S): Vishay Siliconix Time Schedule: Last Time Buy Date: Fri Jan 5, 2024 Last Time Ship Date: Fri Jul 5, 2024 Sample Availability: N/A Product Identification: N/A Qualification Data: N/A This PTN is considered approved, without further notification, unless we receive specific customer concerns… download now
2023_PTN-SIL-000404-2023-Rev0.pdf Product Group: SIL/Wed Jun 28, 2023/PTN-SIL-000404-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 End of Life Notification for SIP280x For further information, please contact your regional Vishay office. Description of Change: Vishay Siliconix announces the end of life of SIP280x Classification of Change: Obsolescence of 6” ASMC wafers Expected Influence on Quality/Reliability/Performance: N/A Part Numbers/Series/Families Affected: SIP2800DY-T1-E3, SIP2801DY-T1-E3, SIP2802DY-T1-E3, SIP2804DY-T1-E3, SIP2805DY-T1- E3 Vishay Brand(S): Vishay Siliconix Time Schedule: Last Time Buy Date: Mon Oct 30, 2023 Last Time Ship Date: Tue Jan 30, 2024 Sample Availability: N/A Product Identification: N/A Qualification Data: N/A This PTN is considered approved, without further notification, unless we receive… download now
2023_PTN-SF-363-2023-Rev0.pdf Product Group: SF/Tue Dec 12, 2023/PTN-SF-363-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Product Discontinuation : RECA885052B / RECA885053B / RECA885055B / RECA885056B For further information, please contact your regional Vishay office. Description of Change: Stop of Production : RECA885052B / RECA885053B / RECA885055B / RECA885056B Reason for Change: Unsustainable profitability level due to significant continuous decrease of purchased volumes and in parallel increase of the production costs due to equipment obsolescence and high raw material content Expected Influence on Quality/Reliability/Performance: Not Applicable Part Numbers/Series/Families Affected: RECA885052B, RECA885053B, RECA885055B, RECA885056B, Vishay Brand(S): Vishay MCB Time Schedule: Last Time Buy Date: Sun Jun 30, 2024… download now
2023_PTN-SF-355-2023-Rev0.pdf Product Group: SF/Wed Oct 25, 2023/PTN-SF-355-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Discontinuation of Wirebondable tantalum nitride (Ta2N) chips resistors family TA22 and TA33 For further information, please contact your regional Vishay office. Description of Change: Obsolescence. In conformance with our Product Life management procedure, and due to lack of demand, Sfernice Division is transferring Wirebondable tantalum nitride (Ta2N) chips resistors series TA22 and TA33 (and derived custom products) to an End of Product Life status. Please understand that EOL productions beyond the presently placed and confirmed orders are only possible in very restricted cases and pursuant price revision. Recommended replacement products for TA22 and TA33: RSK22N and RSK33N Series respectively.… download now
2023_PTN-SF-353-2023-Rev0.pdf Product Group: SF/Tue Oct 17, 2023/PTN-SF-353-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Discontinuation of Transformers and Inductors with lack of demand and obsolescente risk For further information, please contact your regional Vishay office. Description of Change: Obsolescence. In conformance with our Product Life management procedure, and due to lack of customer demand for more than 6 years, amplified by potential obsolescence risk on raw material, Sfernice Division is transferring old Transformers and Inductors to an End of Product Life status Reason for Change: Lack of demand Expected Influence on Quality/Reliability/Performance: none Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Sfernice Time Schedule: Last Time Buy… download now
2023_PTN-SF-339-2023-Rev0.pdf Product Group: SF/Wed Jun 14, 2023/PTN-SF-339-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Product discontinuation For further information, please contact your regional Vishay office. Description of Change: Product discontinuation Classification of Change: Equipment obsolescence and low business Expected Influence on Quality/Reliability/Performance: Not Applicable Part Numbers/Series/Families Affected: REGU500I732050B, REGU1000I733050B, Vishay Brand(S): Vishay MCB Time Schedule: Last Time Buy Date: Tue Aug 15, 2023 Last Time Ship Date: Sun Dec 31, 2023 Sample Availability: Not Applicable Product Identification: REGU - See list below Qualification Data: Not Applicable This PTN is considered approved, without further notification, unless we receive specific customer concerns before Fri Jul 14,… download now
2023_PTN-SF-335-2023-Rev0.pdf Product Group: SF/Tue May 16, 2023/PTN-SF-335-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Discontinuation of Transformers and Inductors not sold since 2019 For further information, please contact your regional Vishay office. Description of Change: Obsolescence. In conformance with our Product Life management procedure, and due to lack of customer demand for more than 4 years, amplified by potential obsolescence risk on raw material, Sfernice Division is transferring old Transformers and Inductors to an End of Product Life status. Classification of Change: No demand for more than 4 years Expected Influence on Quality/Reliability/Performance: none Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Sfernice Time Schedule: Last Time… download now
2023_PTN-OPT-1304-2023-Rev0.pdf Product Group: OPT/Tue Dec 12, 2023/PTN-OPT-1304-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Obsolescence of optocoupler products with low sales For further information, please contact your regional Vishay office. Description of Change: By submitting this notice Vishay is announcing that the products listed herein have reached their end of life and activities have started to cease production in the coming months. Final orders can only be accepted on or before the last order date and are subject to the availability. Early ordering is strongly recommended. Reason for Change: The low demand for these products in the market has rendered these parts unfeasible to continue to support. Expected Influence on Quality/Reliability/Performance: n/a Part Numbers/Series/Families Affected: Please see… download now
2023_PTN-OPT-1303-2023-Rev0.pdf Product Group: OPT/Wed Nov 8, 2023/PTN-OPT-1303-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Product Discontinuation - VCNL4010 For further information, please contact your regional Vishay office. Description of Change: VCNL4010 is announced for end of life. Recommended alternatives for VCNL4010 are given in attached "PTN-OPT-1303- 2023-recommended alternatives". Reason for Change: Due to declining demand, VCNL4010 is being discontinued. Expected Influence on Quality/Reliability/Performance: n/a Part Numbers/Series/Families Affected: VCNL4010-GS08, VCNL4010-GS18, Vishay Brand(S): Vishay Semiconductors Time Schedule: Last Time Buy Date: Tue May 7, 2024 Last Time Ship Date: Wed Nov 6, 2024 Sample Availability: n/a Product Identification: n/a Qualification Data: n/a This PTN is considered… download now
2023_PTN-OPT-1290-2023-Rev0.pdf Product Group: OPT/Thu Jul 13, 2023/PTN-OPT-1290-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Discontinuation of VLMU3520... UVA LED series For further information, please contact your regional Vishay office. Description of Change: Obsolescence of VLMU3520... UVA LED series. In case of upcoming new reasonable demands the corresponding UVA wavelength could be realised on the remaining VLMU3510... production line. Classification of Change: It is no longer feasible to maintain the production line of VLMU3520... due to declining demand. Expected Influence on Quality/Reliability/Performance: N/A Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Semiconductors Time Schedule: Last Time Buy Date: Thu Aug 10, 2023 Last Time Ship Date: Sun… download now
2023_PTN-OPT-1278-2023-Rev1.pdf Product Group: OPT/Wed May 17, 2023/PTN-OPT-1278-2023-REV-1 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Product discontinuation of selected leaded infrared emitting diodes For further information, please contact your regional Vishay office. Description of Change: Affected part numbers are announced for end of life. Recommended alternatives for the infrared emitters are given in attached PTN-OPT-1278-2023-recommended alternatives. Classification of Change: Consolidation of product portfolio while changing emitter chip technology to a state of art technology to ensure future stable supply. Expected Influence on Quality/Reliability/Performance: n/a Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Semiconductors Time Schedule: Last Time Buy… download now
2023_PTN-OPT-1223-2022-Rev0.pdf Product Group: OPT/Wed Aug 31, 2022/PTN-OPT-1223-2022-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Product discontinuation of low running optoelectronic products For further information, please contact your regional Vishay office. Description of Change: Product discontinuation of low-demand optoelectronic products Classification of Change: Low demand / portfolio consolidation Expected Influence on Quality/Reliability/Performance: Product discontinuation Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Semiconductors Time Schedule: Last Time Buy Date: Fri Jul 28, 2023 Last Time Ship Date: Mon Jan 29, 2024 Sample Availability: n/a Product Identification: n/a Qualification Data: n/a This PTN is considered approved, without further… download now
2023_PTN-DI-00603-2023-Rev0.pdf Product Group: DI/Wed Jul 5, 2023/PTN-DI-00603-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Product Obsolescence of Various Series 300 Connectors For further information, please contact your regional Vishay office. Description of Change: Various configurations of Connector Series 300 are becoming obsolete, effective immediately. There is no last time buy date. Other configurations of this connector will continue to be offered. Classification of Change: These parts have limited sales. Expected Influence on Quality/Reliability/Performance: N/A Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Dale Time Schedule: Last Time Buy Date: Fri Jul 14, 2023 Last Time Ship Date: Fri Jul 21, 2023 Sample Availability: N/A Product Identification:… download now
2023_PTN-DD-030-2023-Rev0.pdf Product Group: DD/Fri Nov 3, 2023/PTN-DD-030-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Product obsolescence of some ESD Diodes in CLP package For further information, please contact your regional Vishay office. Description of Change: Vishay Diodes Division will discontinue some Gen 1 ESD part numbers in CLP0603 package to replace with Gen 2 new released part numbers. (see annex 1 for details) Reason for Change: Portfolio consolidation Expected Influence on Quality/Reliability/Performance: There will be no influence on quality, reliability and electrical performances. Part Numbers/Series/Families Affected: VCUT03E1-SD0-G4-08, VCUT05E1-SD0-G4-08, VCUT10A1-SD0-G4-08, VCUT15A1-SD0-G4- 08, Vishay Brand(S): Vishay Semiconductors Time Schedule: Last Time Buy Date: Fri May 3, 2024 Last Time Ship… download now
2023_PTN-DD-029-2023-Rev0.pdf Product Group: DD/Tue Oct 31, 2023/PTN-DD-029-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Discontinuation of Some Rectifier Products in D2PAK (TO-263AB) Package For further information, please contact your regional Vishay office. Description of Change: Vishay Diodes Division is discontinuing some Rectifier part numbers in D2PAK (TO-263AB) package with low sales volume. Please refer to Annex 1 for affected part numbers and their possible substitution. Reason for Change: Low sales Expected Influence on Quality/Reliability/Performance: N/A Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay General Semiconductor Time Schedule: Last Time Buy Date: Tue Apr 30, 2024 Last Time Ship Date: Thu Oct 31, 2024 Sample Availability: N/A Product… download now
2023_PTN-DD-026-2023-Rev0.pdf Product Group: DD/Tue Oct 3, 2023/PTN-DD-026-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Discontinuation of selected D2PAK (TO-263AB) Pb-free Part Numbers For further information, please contact your regional Vishay office. Description of Change: Due to End-of-Life notification of molding compound supplier, Vishay Diodes Division is announcing the discontinuation of some of the existing Pb-free part numbers in D2PAK (TO-263AB) package. At the same time, the corresponding new Halogen Free part numbers are introduced to substitute the obsolete Pb-free part numbers. The Halogen Free compound is already used in D2PAK (TO-263AB) & D2PAK 2L (TO-263AB 2L) production (see Annex 1 for detail of concerned part numbers). Reason for Change: Discontinued supply of existing Molding compound Expected… download now
2023_PTN-DD-020-2023-Rev0.pdf Product Group: DD/Thu Jul 27, 2023/PTN-DD-020-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Product Obsolescence For further information, please contact your regional Vishay office. Description of Change: Vishay Diodes Division announces the discontinuation of some selected high-power rectifiers in compressed technology packages with the purpose to optimize the current products offering. Reason for Change: Products Portfolio Optimization Expected Influence on Quality/Reliability/Performance: N/A Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Semiconductors Time Schedule: Last Time Buy Date: Fri Oct 27, 2023 Last Time Ship Date: Sat Jan 27, 2024 Sample Availability: N/A Product Identification: N/A Qualification Data: N/A This PTN… download now
2023_PTN-DD-018-2023-Rev0.pdf Product Group: DD/Mon May 22, 2023/PTN-DD-018-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Product Discontinuation Notice of Through-hole Mini Bridge For further information, please contact your regional Vishay office. Description of Change: Vishay Diodes will obsolete through-hole Mini Bridge (MBM case outline) with low volume sales. Vishay is committed to support customers with alternative solutions if available (see Annex 1 for details). Classification of Change: Low sales Expected Influence on Quality/Reliability/Performance: N/A Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay General Semiconductor Time Schedule: Last Time Buy Date: Sat Nov 25, 2023 Last Time Ship Date: Sat May 25, 2024 Sample Availability: N/A Product… download now
2023_PTN-DD-006-2023-Rev0.pdf Product Group: DD/Mon Apr 17, 2023/PTN-DD-006-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Product Obsolescence For further information, please contact your regional Vishay office. Description of Change: Vishay Diodes Division announces the discontinuation of some part numbers with the purpose to optimize the current products offering. Vishay is committed to support customers with alternative solutions if available (see Annex 1 for details). Classification of Change: Products Portfolio Optimization Expected Influence on Quality/Reliability/Performance: N/A Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Semiconductors Time Schedule: Last Time Buy Date: Fri Oct 20, 2023 Last Time Ship Date: Mon Apr 22, 2024 Sample Availability:… download now
2023_PTN-DBR-00025-2023-Rev0.pdf Product Group: DBR/Fri Nov 24, 2023/PTN-DBR-00025-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Discontinuation of Thin Film Chip Resistor Array ACAC series For further information, please contact your regional Vishay office. Description of Change: The Thin Film Chip Resistor Array ACAC series will be discontinued Reason for Change: Lack of market demand and discontinuation of raw material Expected Influence on Quality/Reliability/Performance: ACAS or ACAS AT series might be alternative products upon customer evaluation Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Beyschlag Time Schedule: Last Time Buy Date: Fri May 31, 2024 Last Time Ship Date: Sat Nov 30, 2024 Sample Availability: Not applicable Product Identification: Not… download now
2023_PTN-DBR-00024-2023-Rev0.pdf Product Group: DBR/Tue Oct 31, 2023/PTN-DBR-00024-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Discontinuation of Ø 285 mm/ 11.25” reels packaging for Thick Film Chip Resistors series For further information, please contact your regional Vishay office. Description of Change: Discontinuation of Ø 285 mm/ 11.25” reels packaging in Thick Film Rectangular Chip Resistors, Tin-Lead and Lead- Free series. Popular packaging, Ø 180 mm/ 7” reels and Ø 330 mm/ 13” reels are further available. Reason for Change: Low market demand. Popular packaging, Ø 180 mm/ 7” reels and Ø 330 mm/ 13” reels are further available. Expected Influence on Quality/Reliability/Performance: None Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay BCcomponents Time… download now
2023_PTN-DBR-0002-2023-Rev0.pdf Product Group: DBR/Wed Feb 15, 2023/PTN-DBR-00002-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Discontinuation of Metal Film, Cylindrical Resistors PMM0204 and PMM0207 for Ecomal For further information, please contact your regional Vishay office. Description of Change: Discontinuation of the selected products of Metal Film, Cylindrical Resistors, PMM0204 and PMM0207 series from Vishay Draloric for Ecomal. For available replacement products please refer to appendix 1 of this discontinuation information. Classification of Change: Low market demand Expected Influence on Quality/Reliability/Performance: n.a. Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Draloric Time Schedule: Last Time Buy Date: Fri Sep 1, 2023 Last Time Ship… download now
2023_PTN-DBR-00019-2023-Rev0.pdf Product Group: DBR/Thu Sep 21, 2023/PTN-DBR-00019-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Product Discontinuation – Standard Metal Film Leaded Resistors SFR16S series: Resistance values 1R to 4R7 in ± 5% tolerance For further information, please contact your regional Vishay office. Description of Change: Resistance values 1R to 4R7 in ± 5% tolerance from Standard Metal Film Leaded Resistors series SFR16S will be discontinued. Drop-in replacements will be as follows: SFR16S0001008JA500 Replaced by MBA02040C1008FCT00, SFR16S0001208JA500 Replaced by MBA02040C1208FCT00, SFR16S0001808JA100 Replaced by MBA02040C1808FC100, SFR16S0001808JA500 Replaced by MBA02040C1808FCT00, SFR16S0002208JA100 Replaced by MBA02040C2208FC100, SFR16S0002208JA500 Replaced by MBA02040C2208FCT00, SFR16S0002708JA500… download now
2023_PTN-DBR-00015-2023-Rev0.pdf Product Group: DBR/Thu Jul 27, 2023/PTN-DBR-00015-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Product Discontinuation – Compact Metal Plate Power Resistors- ULDCR series For further information, please contact your regional Vishay office. Description of Change: Compact Metal Plate Power Resistors series ULDCR including following part numbers will be discontinued without replacement. Reason for Change: Unviable manufacturing due to low market demand. Expected Influence on Quality/Reliability/Performance: N.A. Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Draloric Time Schedule: Last Time Buy Date: Wed Jan 24, 2024 Last Time Ship Date: Wed Jul 24, 2024 Sample Availability: N.A. Product Identification: N.A. Qualification Data:… download now
2023_PTN-DBR-00011-2023-Rev0.pdf Product Group: DBR/Mon Feb 20, 2023/PTN-DBR-00011-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Discontinuation of Bulk-Case Packing for Professional and Precision Thin Film MELF Resistors for Ecomal For further information, please contact your regional Vishay office. Description of Change: Discontinuation of the packing method “Bulk-Case” (M3 and M8) for Professional and Precision Thin Film MELF Resistors from Vishay Beyschlag for Ecomal. For available replacement products in tape and reel please refer to appendix 1 of this discontinuation information. Classification of Change: low market demand Expected Influence on Quality/Reliability/Performance: n.a. Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Beyschlag Time Schedule:… download now
2023_PTN-DBR-00002-2023-Rev0.pdf Product Group: DBR/Wed Feb 15, 2023/PTN-DBR-00002-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Discontinuation of Metal Film, Cylindrical Resistors PMM0204 and PMM0207 for Ecomal For further information, please contact your regional Vishay office. Description of Change: Discontinuation of the selected products of Metal Film, Cylindrical Resistors, PMM0204 and PMM0207 series from Vishay Draloric for Ecomal. For available replacement products please refer to appendix 1 of this discontinuation information. Classification of Change: Low market demand Expected Influence on Quality/Reliability/Performance: n.a. Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Draloric Time Schedule: Last Time Buy Date: Fri Sep 1, 2023 Last Time Ship… download now
2023_PTN-CC-00009-2023-Rev0.pdf Product Group: CC/Thu Sep 28, 2023/PTN-CC-00009-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Discontinuation of some items from RHK series For further information, please contact your regional Vishay office. Description of Change: We will discontinue the herein mentioned part numbers from the RHK series Reason for Change: The herein mentioned part numbers require some specific production equipment. Due to the decreasing demand from the market it is not economical to run production. Expected Influence on Quality/Reliability/Performance: N/A Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Draloric Time Schedule: Last Time Buy Date: Wed Mar 27, 2024 Last Time Ship Date: Mon Sep 23, 2024 Sample Availability: N/A Product… download now
2023_PTN-CC-00002-2023-Rev0.pdf Product Group: CC/Fri Mar 17, 2023/PTN-CC-00002-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Obsolescence of some industrial leaded MLCC with dielectric Y5V For further information, please contact your regional Vishay office. Description of Change: Due to the lack of raw materials, we will end the life cycle of some leaded MLCC with dielectric Y5V of A series and K series. Please find attached to this PTN on the last pages alternatives for replacement in X7R ceramic material. For more information on the difference between Y5V ceramic material and X7R ceramic material please check our general information www.vishay.com/doc?45163 and Did you know? www.vishay.com/doc?48299 Classification of Change: Due to the lack of raw materials, some of our Y5V products cannot be produced any more, we have… download now
2023_PTN-CC-00001-2023-Rev0.pdf Product Group: CC/Thu Mar 16, 2023/PTN-CC-00001-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Obsolescence of HPC and HPD High Voltage Capacitors For further information, please contact your regional Vishay office. Description of Change: Due to shrinking market demand it is not feasible anymore to support the ceramic high voltage capacitors HPC and HPD series. Classification of Change: Due to shrinking market demand it is not feasible to keep the special manufacturing equipment for the ceramic high voltage capacitors mentioned below. Expected Influence on Quality/Reliability/Performance: N/A Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Time Schedule: Last Time Buy Date: Sun Sep 17, 2023 Last Time Ship Date: Mon Mar 11, 2024… download now
2023_PTN-AC-00901-2023-Rev0.pdf Product Group: AC/Fri May 12, 2023/PTN-AC-00901-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 End of Life for all Sprague Snap In and Screw Terminal series For further information, please contact your regional Vishay office. Description of Change: End of life for Sprague branded Snap In and Screw Terminal aluminum capacitors of series 36D, 36DE, 36DX, 36DY, 80D and supplemental material 12458*, 75-327. For replacement parts please contact your local Vishay sales office. Classification of Change: Discontinuance of third party materials Expected Influence on Quality/Reliability/Performance: - Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Sprague Time Schedule: Last Time Buy Date: Mon Jun 12, 2023 Last Time Ship Date: Tue Oct 31,… download now
2023_PTN-AC-00503-2023-Rev0.pdf Product Group: AC/Thu Jun 22, 2023/PTN-AC-00503-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Discontinuance of Radial Series 013 RLC, 036 RSP and 116 RLL with case size 5x11 mm. For further information, please contact your regional Vishay office. Description of Change: Termination of Vishay BCcomponents Series 013 RLC, 036 RSP and 116 RLL with case size 5x11 mm. Affected part numbers: all PNs with case size 5x11mm within these families, whether listed or not. Classification of Change: Poor availability of key raw materials and low market demand. Expected Influence on Quality/Reliability/Performance: - Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay BCcomponents Time Schedule: Last Time Buy Date: Fri Jun 28, 2024 Last Time Ship… download now
2023_PTN-AC-00502-2023-Rev0.pdf Product Group: AC/Thu Jun 22, 2023/PTN-AC-00502-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Discontinuance of Radial Series 013 RLC, 036 RSP and 116 RLL with case size 5x11 mm. For further information, please contact your regional Vishay office. Description of Change: Termination of Vishay BCcomponents Series 013 RLC, 036 RSP and 116 RLL with case size 5x11 mm. Affected part numbers: all PNs with case size 5x11mm within these families, whether listed or not. Classification of Change: Poor availability of key raw materials and low market demand. Expected Influence on Quality/Reliability/Performance: N/A Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay BCcomponents Time Schedule: Last Time Buy Date: Fri Jun 28, 2024 Last Time Ship… download now
2023_PIN-TC-006-2023-Rev0.pdf Product Group: TC/Wed Aug 30, 2023/PIN-TC-006-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 New GTMS Supplier Approval. For further information, please contact your regional Vishay office. Description of Change: GTMS (Glass-to-Metal-Seal) covers from new supplier were qualified by engineering. New GTMS has identical characteristics with currently used one except glass color: black vs. blue. Reason for Change: Second source of supply for critical materials. Expected Influence on Quality/Reliability/Performance: No influence. Part Numbers/Series/Families Affected: 138D*, 738D*, Vishay Brand(S): Vishay Sprague Time Schedule: Start Shipment Date: Fri Dec 15, 2023 Sample Availability: Upon Request. Product Identification: No special identification. Qualification Data: Upon Request. Issued By: Ilia… download now
2023_PIN-SIL-045-2023-Rev0.pdf Product Group: SIL/Thu Nov 30, 2023/PIN-SIL-045-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Advisory of Datasheet Revision with Spirito SOA for Commercial MOSFETs For further information, please contact your regional Vishay office. Description of Change: As part of Vishay Siliconix commitment to quality, we would like to extend to you a courtesy advisory notification of the datasheet revision with Spirito SOA (Safe Operating Area) for the commercial MOSFET products, including SIJH5100E, SIRA00DP, SIRA20BDP, SIRA99DP, SIR626LDP, and SI7145DP. There is no change to the materials used in the manufacture of this part. We hope you find this Datasheet Update Advisory helpful. This Advisory is for information only and there is no need for a response. Reason for Change: Datasheet Revision Expected… download now
2023_PIN-SIL-043-2023-Rev0.pdf Product Group: SIL/Mon Oct 2, 2023/PIN-SIL-043-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Revision in SQJ402EP Datasheet from Rev. C to Rev. D For further information, please contact your regional Vishay office. Description of Change: As part of Vishay Siliconix commitment to Quality, we would like to extend to you a courtesy advisory notification of a datasheet revision for SQJ402EP (Doc #67997 Rev D attached). There is no change to the materials or processes used in the manufacture of this part. The changes per this Advisory reflect updates as follows: Typo correction on pages 1, 2, and 4 of datasheet. Page1: Removed superscript “d” from Feature “AEC-Q101 Qualified”; superscript “b” from “Maximum Power Dissipation”; and note “d. Parametric verification ongoing”. Page2: Renamed superscript… download now
2023_PIN-SIL-037-2023-Rev0.pdf Product Group: SIL/Thu Jul 27, 2023/PIN-SIL-037-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Advisory Regarding Datasheet Revision for SUM60061EL & SUP60061EL For further information, please contact your regional Vishay office. Description of Change: As part of Vishay Siliconix commitment to quality, we would like to extend to you a courtesy advisory notification of a datasheet revision for the following part numbers, SUM60061EL-GE3 & SUP60061EL-GE3, from Rev.A to Rev.B. There is no change to the materials used in the manufacture of this part. We hope you find this Datasheet Update Advisory helpful. This Advisory is for information only and there is no need for a response. Reason for Change: Datasheet Correction Expected Influence on Quality/Reliability/Performance: No impact on the quality,… download now
2023_PIN-SIL-006-2023-Rev0.pdf Product Group: SIL/Tue Jan 31, 2023/PIN-SIL-006-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Plating Facility Move within Binan, Philippines - Commercial Power MOSFETs For further information, please contact your regional Vishay office. Description of Change: The wafer plating process for commercial power MOSFET products will move to a new building within the same Laguna Technopark. Classification of Change: In order to increase the capacity, Vishay Siliconix has moved the Philippines wafer plating facility in a larger building with the same equipment, same process, and same personnel.m Expected Influence on Quality/Reliability/Performance: There will be no effect on performance, quality or reliability and no change to form, fit, or function of the shipped devices. Part Numbers/Series/Families… download now
2023_PIN-SIL-005-2023-Rev0.pdf Product Group: SIL/Wed Feb 1, 2023/PIN-SIL-005-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 HVM HEXDIP Package Laser Marker Change at Subcontractor Cirtek For further information, please contact your regional Vishay office. Description of Change: This advisory is being provided to you as an announcement that we will replace the Lumonics 930 with EZ Laser Marker Model, TM8002P, for HVM HEXDIP package at our Subcontractor – Cirtek, Philippines. Classification of Change: This change is to replace existing machine, Lumonics 390, which had been phased out and new EZ Laser Marker, TM8002P, is capable to detect no marking unit. Expected Influence on Quality/Reliability/Performance: There will be no effect on the quality, reliability, or performance. Part Numbers/Series/Families Affected: Please see… download now
2023_PIN-SIL-004-2023-Rev0.pdf Product Group: SIL/Thu Jan 26, 2023/PIN-SIL-004-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Plating Facility Move within Binan, Philippines - Automotive Mosfets For further information, please contact your regional Vishay office. Description of Change: The Mosfet wafer plating process for automotive products will move to a new building within the same Laguna Technopark. Classification of Change: In order to increase capacity Vishay Siliconix has moved the Philippines wafer plating facility in a larger building with the same equipment, same process and same personnel. Expected Influence on Quality/Reliability/Performance: There will be no effect on performance, quality or reliability and no change to form, fit, or function of the shipped devices. Part Numbers/Series/Families Affected: Please… download now
2023_PIN-SIL-001-2023-Rev0.pdf Product Group: SIL/Tue Jan 17, 2023/PIN-SIL-001-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Potential delivery interruption for the selected Power MOSFETs due to the fire accident at Welnew Wuxi factory and the adoption of the alternative site in Vishay Tianjin For further information, please contact your regional Vishay office. Description of Change: This advisory is being provided to you as an announcement that due to the fire accident on 2023/1/6 afternoon at Welnew Wuxi factory (China), the plating subcon of Vishay Siliconix, it’s expected the delivery interruption on specific part types, including TSOP-6, TO-236 (SOT-23), SO-8, PowerPAK 1212-8, Thin PowerPAK 1212-8, PowerPAK SO-8, and 1206-8 ChipFET. The detail part list of each package is attached in the following pages of this… download now
2023_PIN-SIL-000511-2023-REV-0.pdf Product Group: SIL/Thu Jun 8, 2023/PIN-SIL-000511-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 SiC461/2/3/4 & SiC471/2/3/4 Datasheet Update For further information, please contact your regional Vishay office. Description of Change: Enable pin internal resistance. Classification of Change: New characterization data showed that the distribution limits moved, and therefore the change of datasheet limits Expected Influence on Quality/Reliability/Performance: There will be no effect on performance, quality or reliability. Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Siliconix Time Schedule: Start Shipment Date: Mon Aug 14, 2023 Sample Availability: Samples are available now Product Identification: Lot Number and Country of Origin… download now
2023_PIN-SIL-000503-2023-Rev0.pdf Product Group: SIL/Wed Jan 25, 2023/PIN-SIL-000503-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Final Test Facility move within Binan, Philippines For further information, please contact your regional Vishay office. Description of Change: The Finish good Test for IC products will move to a new building within the same Laguna Technopark. Classification of Change: In order to increase capacity Vishay Siliconix has moved the Philippines Final Test in a larger building with the same equipment, same process and same personnel. Expected Influence on Quality/Reliability/Performance: There will be no effect on performance, quality or reliability and no change to form, fit, or function of the shipped devices. Part Numbers/Series/Families Affected: Please see materials list on the succeeding page.… download now
2023_PIN-SIL-000502-2023-Rev0.pdf Product Group: SIL/Wed Jan 25, 2023/PIN-SIL-000502-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Test and Plating Facility move within Binan, Philippines For further information, please contact your regional Vishay office. Description of Change: The Mosfet wafer plating process and the Finish good Test for IC products will move to a new building within the same Laguna Technopark. Classification of Change: In order to increase capacity Vishay Siliconix has moved the Philippines wafer plating facility and the Final Test in a larger building with the same equipment, same process and same personnel. Expected Influence on Quality/Reliability/Performance: There will be no effect on performance, quality or reliability and no change to form, fit, or function of the shipped devices. Part… download now
2023_PIN-SIL-000501-2023-Rev0.pdf Product Group: SIL/Wed Jan 25, 2023/PIN-SIL-000501-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Plating Facility move within Binan, Philippines For further information, please contact your regional Vishay office. Description of Change: The Mosfet wafer plating process for IC products will move to a new building within the same Laguna Technopark. Classification of Change: In order to increase capacity Vishay Siliconix has moved the Philippines wafer plating facility in a larger building with the same equipment, same process and same personnel. Expected Influence on Quality/Reliability/Performance: There will be no effect on performance, quality or reliability and no change to form, fit, or function of the shipped devices. Part Numbers/Series/Families Affected: Please see materials list on the… download now
2023_PIN-SF-342-2023-Rev0.pdf Product Group: SF/Thu Jul 6, 2023/PIN-SF-342-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Sfernice-CH/CHA product families – Quantity change on packaging option T and PT. For further information, please contact your regional Vishay office. Description of Change: Modify T and PT packaging from "100 min., 1 mult." to "100 min., 100 mult.; delivered in reels of 1000 pces max. Classification of Change: To simplify the packaging options on CH-CHA product families. Expected Influence on Quality/Reliability/Performance: No impact on Form/Fit/Function of the component. Part Numbers/Series/Families Affected: CH02016*, CH0402*, CH0603*, CHA02016*, Vishay Brand(S): Vishay Sfernice Time Schedule: Start Shipment Date: Wed Nov 1, 2023 Sample Availability: NA Product Identification: NA Qualification Data: NA… download now
2023_PIN-DI-00622-2023-Rev0.pdf Product Group: DI/Mon Nov 20, 2023/PIN-DI-00622-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 IHLP-6767 Width Tolerance Correction For further information, please contact your regional Vishay office. Description of Change: The tolerance on the overall part width (terminal-to-terminal) for all IHLP6767* inductors is being corrected from ±0.005" to ± 0.010" to resemble the tolerance listed on most other IHLP products. There are no changes to the part or the manufacturing process. Please see image on following page for more information. Reason for Change: Datasheet being corrected to reflect observed manufacturing tolerances. Expected Influence on Quality/Reliability/Performance: None. This is a datasheet correction. Part Numbers/Series/Families Affected: Please see materials list on the… download now
2023_PIN-DI-00593-2023-Rev0.pdf Product Group: DI/Tue Jun 6, 2023/PIN-DI-00593-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 IHCM-2321AA-10 Common Mode Choke Datasheet Update For further information, please contact your regional Vishay office. Description of Change: The datasheet dimensions of the IHCM-2321AA-10 common mode choke series are being corrected to more accurately reflect the typical dimensions observed in production. Maximum storage temperature is being increased to 155°C. (Max operating temperature and part design remains unchanged.) A complete description of the changes is shown under “Product Identification" on the following page. THIS IS AN INFORMATION CHANGE NOTICE ONLY. No action needed. Classification of Change: Datasheet Correction Expected Influence on Quality/Reliability/Performance: May potentially… download now
2023_PIN-DD-034-2023-Rev0.pdf Product Group: DD/Tue Nov 14, 2023/PIN-DD-034-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Typo corrections in MTP outline For further information, please contact your regional Vishay office. Description of Change: Vishay Semiconductors communicates some typos correction into the outline drawings of MTP datasheets (See Annex 1). Reason for Change: Typo correction. Expected Influence on Quality/Reliability/Performance: There will be no effect on product quality, reliability or performance. Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Semiconductors Time Schedule: Start Shipment Date: Tue Nov 14, 2023 Sample Availability: Samples available upon request Product Identification: Batch code (contact factory for the details)… download now
2023_PIN-DD-023-2023-Rev0.pdf Product Group: DD/Mon Sep 18, 2023/PIN-DD-023-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 UL withdrawal on some TO-220 FullPAK part numbers For further information, please contact your regional Vishay office. Description of Change: Vishay is withdrawing some TO-220 FullPAK part numbers from UL file, E78996. Products will continue to meet UL 94 V-0 flammability rating. Reason for Change: Low demand Expected Influence on Quality/Reliability/Performance: There will be no effect on product quality, reliability or performance. Products are not being discontinued and datasheets will continue to be available. Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Semiconductors Time Schedule: Start Shipment Date: Fri Sep 22, 2023 Sample… download now
2023_PIN-DD-008-2023-Rev0.pdf Product Group: DD/Wed Apr 26, 2023/PIN-DD-008-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Datasheet Device Unit Weight Change For further information, please contact your regional Vishay office. Description of Change: Update datasheet device unit weight for TVS SMB products to be compliant with the change announced in PCN- DD-009-2022 and PCN-DD-033-2022. There is no change in form, fit and function on all involved part numbers. Please refer to annex 1 for change view. Classification of Change: Datasheet device unit weight change Expected Influence on Quality/Reliability/Performance: No change in quality and reliability performance Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay General Semiconductor Time Schedule: Start… download now
2023_Pilkor_PCMT-365-367.pdf download now
2023_PDN_P063330_WAVE.pdf Product Discontinuation Notification Page 1 Product discontinuation for WAVE series of signal conditioners Dear Sir or Madam, the WAVE series of signal conditioners will have to be discontinued and will no longer be available after a transitional period. This product discontinuation is the result of changing market and supply conditions . Please pass on this product information to your employees and possibly to your customers . 1. Initial situation 2. Schedule / Availability • WAVE Series - Analogue signal conditioners • Background: Manufacturing for the above items cannot be guaranteed any longer. • Details: After nearly 20 years of product lifetime, non - availability of components does not allow a further stable production. • Affected articles: See “Table 1” below. • Availability : See “Table 1” below. Please note, due to shortage of components, serving of all orders until date of cancellation cannot be guaranteed. • When are follow -up articles available? For devices with follow… download now
2023_PDN_Ecomal_231006.pdf download now
2023_PDN-PKD10-20230131-00-A.pdf Product Discontinuation Notification PD N-PKD 10-20230131- 00-A P age 1 Product Discontinuation for WDK 2.5 BLA/5.08/ZA and WDU 1.5/BLA Dear Sir or Madam, the products listed below are intended to be discontinued and will no longer be available after a transitional period. Please pass on this product information to your employees and possibly to your customers. This product discontinuation is the result of our ongoing commitment to continuously improve our products for you. 1. Initial situation 2. Schedule / Availability T o be discontinued : Successor material: WDK 2.5 BLA/5.08/ZA WDK 2.5/BLZ/5.08/ZA WDU 1.5/B LA WDU 1.5/ZQV/BLZ 5.08 For further questions or if you need any additional assistance or information, please contact your local sales office directly. All contacts for sales representatives are available here: http://www.weidmue ller.com/contact Best regards Product Management Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16, 32758 Detmold, Germany Weidmüller – Your… download now
2023_PDN-PA56-2023_09_06_P062146_00_PSSR.pdf Product Discontinuation Notification PDN -PA56 -202 3/09/06 _P062146 _00 Page 1 Product discontinuation PSSR 3 -phase Solid -State contactor Dear Madam or Sir, we hereby inform you that the below listed articles has been subjected to be discontinued and will no longer be available after a transitional period. Please pass this product information only to your employees and possibly to your customers 1. General Overview ___________________________________________________________________________________________________________ ______________________________________________ Type of notification : PCN PDN Short -term action (<6 months) Short -term action due to: Software / Firmware Bugfix Short term delivery stop by supplier Short term recall by supplier Force majeure Product improvement with customer benefit other ___________________________________________________________________________________________________________ 2. General Information… download now
2023_PCN_TR-22007_ZR.pdf PCN - Product Change Notification No.: Date: Originator: Subject: Related product: Should you have any issues within this PCN, please contact us within the next 30 days. No response will be deemed as your acceptance. Description of change: Identification of change: Reason of change: expiring of UL certification of the raw material socket without UL: green color socket with UL: black color part nos. as above Schedule: step by step - there is still stock for UL certified material (subject to prior sale) TR-22007_ZR 08.08.2023 A. Schaffarczyk UL certification expires (*)ZR-8 M -P / (*)=circuit No. IDC socket in green color for AWG 28 The UL certification of the green resin material used for mentioned IDC connector expires. If you would like to have this product with UL certified material in the future, we ask you to order this IDC socket in black color. part description: ( )ZR-8 K-P If UL certification is not required for your application, you can still order the sockets ( )ZR-8 M-P in… download now
2023_PCN_RD202310002.pdf 凯美电机股份有限公司 KAIMEI ELECTRONIC CORP. 工程变更 Engineering Change 通知单ECN 等级A 申请单ECR 等级B 致To﹕ 所有客户 All customer 变更编号ECN/ECR Number﹕RD202310002 工程变更名称：Engineering change name Snap-in产品上新增镭射印字，将生产批号、周期及特性测试ID号印于产品胶管上 Add laser printing with production lot number (L/N), date code (D/C) and characteristic test ID number on Snap-in product sleeve. 变更对象﹕Change Object：所有Snap-in产品 All Snap-in products 变更类型：Change type □ 原材料变更Raw material change □ 原材料供应商变更Raw material manufacturer change □ 法律规定使用物质变更Law specified using substances change □ 内控标准的变更Internal control standard change □ 产品结构/外观/尺寸/ 电性能 SPEC.的变更 Products construction/appearance/dimensi ons/characteristics SPEC. change □ 设备新增或变更 Equipment(change/new) □ 模具变更Molding die revised □ 工艺流程, 场所变更 Manufacturing process & layout change □ 加工/作业方法变更 Process method change □ 检查方法变更 Inspection method change 其它：Others 变更内容:(须填写详细内容及建议具体解决方案) Change content: (Detailed content and advice for disposing should be filled )… download now
2023_PCN_G2-QA-MQA-F107Rev00.pdf Nidec precision Koriyama factory QA group Title ： Packaging tray chang e no tice □ Parts □ Structure ■ Packing □ その他 □ New mold □ Repairv of mold □ Process □ Checking □ Factory □ Supplier □ Equipment □ Jig □ Logistics Current Form tray 50pcs/tray × 2layers ＝ 100pcs / carton After changing Plastic tray 30pcs/tray × 4layers × 2packs ＝ 240pcs / carton Attached Comparison of old and new packaging methods Packing test result To:NIDEC COMPONENTS CORPORATION 29-Aug-23 Our MG16 series is shipped in a styrofoam tray. However, foam trays are difficult to obtain at overseas factories, and from an environmental point of view, they have a large volume when discarded and are not suitable for recycling. For this reason, we plan to change to a general plastic tray. In addition, as a result of the evaluation of packaging vibration and drop, there was no problem with the characteristics even after changing the packaging. 〔Applicable model〕 All types of MG16B １． Type of changing ２． Reason Schedule… download now
2023_PCN_BTB-PCN-2023-215-231018-A.pdf Product Change Notification PCN-2023/215 -231018 -A Page 1 Technical change to Board -to-Board connectors Dear Madam or Sir, the products of our OMNIMATE ® Board -to-Board connectors will be changed after a transitional period. Please pass on this Product Change Notification (PCN) to your employees and, if applicable, to your customers . 1. General overview Type of change : short -term (executed within the next 6 month s) normal (executed after 6 mont hs) 2. General information To enhance the automatic optical inspection process for our customers, we will be reducing the length of our solder pins. In the past, there were instances where the contact points protruded slightly, but this change will prevent such occurrences in the future. Moreover, the new dimensions will facilitate more clearly identifiable solder joints and the corresponding meniscus, resulting in impro ved controllability during the PCB assembly process. Furthermore, we are planning to replace the pick -and -place pads… download now
2023_PCN-TR-23008_G23-00715.pdf download now
2023_PCN-TR-23003_G23-00363.pdf download now
2023_PCN-TR-22096_G22-07915.pdf download now
2023_PCN-TR-21088_XA.pdf PCN - Product Change Notification No.: Date: Originator: Subject: Related product: This document or attachment contains information that is proprietary to J.S.T. and shall not be used or shown without written permission. Reason of change: Identification of change: via lot no. In order to improve the availability of the products. addition of resin material as follows: current material: CM3004V0 additional material: PA66-RNG00 Product performance remain unchanged. Additional material is UL / CSA certified. TüV registration of additional material is under application. Registration completion date has not been determined and depends on the TüV authority. Description of change: schedule: Step by step TR-21088_XA 13.01.2023 A. Schaffarczyk XA housing addition of material XAP-(*)V-1 * = circuit no. FB_7.5.3.2.3.1JST Deutschland GmbHKüferstr. 15D-73650 W interbach Phone: +49/7181/4007-0 e-mail: customer.service@jst.de www.jst.de register court: Amtsgericht Stuttgart HRB 280991CEO: Masao… download now
2023_PCN-TF-00002-2023-Rev1.pdf Product Group: TF/Thu Jul 6, 2023/PCN-TF-00002-2023-REV-1 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 L-NS series lead free termination construction change. For further information, please contact your regional Vishay office. Description of Change: L-NS series lead free termination construction will change from e1 (SAC alloy) to e3 (Sn). Classification of Change: SAC alloy not available for plating process. New high speed production line needs to utilize a plating process. Expected Influence on Quality/Reliability/Performance: No change in form, fit, or function. Part Numbers/Series/Families Affected: L-*ST*, L-*SW*, L-*SB*, Vishay Brand(S): Vishay Dale Thin Film,Vishay Thin Film Time Schedule: Start Shipment Date: Mon Oct 2, 2023 Sample Availability: Samples available upon request Product… download now
2023_PCN-TF-00001-2023-Rev0.pdf Product Group: TF/Thu Mar 30, 2023/PCN-TF-00001-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Construction material and location change for L-NS series. For further information, please contact your regional Vishay office. Description of Change: The L-NS series country of origin will change from USA to Israel. The L-NS construction will change from electroless nickel to metal glaze. The maximum resistance value on the 1020 case size will reduce from 3 ohms to 1 ohm. Classification of Change: Moving construction to more automated production facility to handle volume of business. Expected Influence on Quality/Reliability/Performance: No change in form, fit or function. See updated datasheet for dimensional range adjustments. Part Numbers/Series/Families Affected: Please see materials list on the… download now
2023_PCN-TC-006-2022-Rev1.pdf Product Group: TC/Tue Feb 28, 2023/PCN-TC-006-2022-REV-1 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 VISHAY Components (Huizhou) Co., Ltd. (Danshui China Facility) site qualification for T55 For further information, please contact your regional Vishay office. Description of Change: To introduce an additional manufacturing location in China for T55 Classification of Change: To further expand production capacity and establish a fully qualified dual-manufacturing location to mitigate supply risks for our customers, Vishay is duplicating our equipment and processes already established in our Polytech manufacturing facility located in Miharu, Japan, at our longtime production facility located in Danshui, PRC. This facility has been in operation since 2003, has a highly skilled and experienced workforce, and… download now
2023_PCN-TC-003-2023-Rev0.pdf Product Group: TC/Tue Aug 29, 2023/PCN-TC-003-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 VISHAY Components (Huizhou) Co., Ltd. (Danshui China Facility) site qualification for TMCM For further information, please contact your regional Vishay office. Description of Change: To introduce an additional manufacturing location in China for TMCM Reason for Change: To further expand production capacity and establish a fully qualified dual manufacturing location to mitigate supply risks for our customers, Vishay is duplicating our equipment and processes already established in our Polytech manufacturing facility located in Miharu, Japan, at our longtime production facility located in Danshui, PRC. This facility has been in operation since 2003, has a highly skilled and experienced workforce, and is… download now
2023_PCN-SIL-064-2023-Rev0.pdf Product Group: SIL/Mon Dec 18, 2023/PCN-SIL-064-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 530MC Automotive MOSFET Process Transfer to Tower Semiconductor - SQJQ148E For further information, please contact your regional Vishay office. Description of Change: In order to increase front end capacity, Vishay is transferring some production of part number SQJQ148E to Tower Semiconductor Migdal Haemek (TMH) in Israel Reason for Change: Capacity Expansion Expected Influence on Quality/Reliability/Performance: None Part Numbers/Series/Families Affected: SQJQ148E-T1_GE3 Vishay Brand(S): Vishay Siliconix Time Schedule: Start Shipment Date: Sat Jun 15, 2024 Sample Availability: Samples available on request Product Identification: SQJQ148E-T1_JE3 Qualification Data: AEC Q101 qualification data is… download now
2023_PCN-SIL-061-2023-Rev0.pdf Product Group: SIL/Tue Dec 12, 2023/PCN-SIL-061-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 530MC Automotive MOSFET Process Transfer to Tower Semiconductor - SQJA36EP For further information, please contact your regional Vishay office. Description of Change: In order to increase front end capacity, Vishay is transferring some production of part number SQJA36EP to Tower Semiconductor Migdal Haemek (TMH) in Israel. Reason for Change: Capacity Expansion Expected Influence on Quality/Reliability/Performance: None Part Numbers/Series/Families Affected: SQJA36EP-T1_GE3, SQJA36EP-T2_GE3, Vishay Brand(S): Vishay Siliconix Time Schedule: Start Shipment Date: Sun Jun 9, 2024 Sample Availability: Samples available on request Product Identification: SQJA36EP-T1_JE3 Qualification Data: AEC Q101… download now
2023_PCN-SIL-044-2023-Rev1.pdf Product Group: SIL/Fri Dec 1, 2023/PCN-SIL-044-2023-REV-1 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Vishay Siliconix Additional Automotive MOSFET Wafer Fab and Backend Capacity - SQ7414CENW For further information, please contact your regional Vishay office. Description of Change: In order to increase capacity to support business growth on select parts, Vishay is approving a new fabrication facility, Tower Semiconductor San Antonio (TSSA) located in San Antonio, TX ("_JE3" suffix). TSSA has been a subcontracting partner of Vishay Siliconix since 1995, manufacturing Vishay’s commercial power MOSFETs. Founded in 1993, TSSA (formerly TowerJazz) is a worldwide supplier for wafer manufacturing foundry services. TSSA’s fabrication facility in San Antonio, TX has achieved ISO-9001, ISO41001, and TS16949… download now
2023_PCN-SIL-044-2023-Rev0.pdf Product Group: SIL/Wed Nov 8, 2023/PCN-SIL-044-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Vishay Siliconix Additional Automotive MOSFET Wafer Fab and Backend Capacity - SQ7414CENEW For further information, please contact your regional Vishay office. Description of Change: In order to increase capacity to support business growth on select parts, Vishay is approving a new fabrication facility, Tower Semiconductor San Antonio (TSSA) located in San Antonio, TX ("_JE3" suffix). TSSA has been a subcontracting partner of Vishay Siliconix since 1995, manufacturing Vishay’s commercial power MOSFETs. Founded in 1993, TSSA (formerly TowerJazz) is a worldwide supplier for wafer manufacturing foundry services. TSSA’s fabrication facility in San Antonio, TX has achieved ISO-9001, ISO41001, and TS16949… download now
2023_PCN-SIL-043-2023-Rev0.pdf Product Group: SIL/Fri Oct 20, 2023/PCN-SIL-043-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Vishay Siliconix Announces Manufacturing Capacity Expansion of BGBM Wafer Process for Commercial Power MOSFETs in TO-252 and TO-263 Packages For further information, please contact your regional Vishay office. Description of Change: To meet increasing demand for commercial Power MOSFET products, Vishay Siliconix announces the qualification of wafer back-grind and back-metallization (BGBM) on select Commercial Power MOSFET in TO-252 and TO-263 packages at Prosperity Power Technology Inc.. ProPowertek, founded at the Hsinchu Science Park in Nov’20, aims to provide customers with engineering services for the center- and backend wafer making process, and is devoted to leading the world in this market.… download now
2023_PCN-SIL-036-2023-Rev0.pdf Product Group: SIL/Thu Jul 27, 2023/PCN-SIL-036-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Vishay Siliconix Announces Capacity Expansion for the Solder Plating of Commercial Power MOSFET For further information, please contact your regional Vishay office. Description of Change: To meet increasing demand with more flexibility for power MOSFETs, Vishay Siliconix announces the qualification of the new solder-plating site, Welnew-Shanghai, in Shanghai city, China. This full release of Welnew-Shnaghai applies to commercial product packages with copper lead-frame assembled in Simconix in Shanghai. Welnew-Shanghai was founded in 2006 as a leading provider of Hall sensor products, semiconductor process service, and equipments. Welnew- Shanghai has achieved the certifications, including IATF-16949,… download now
2023_PCN-SIL-035-2023-Rev0.pdf Product Group: SIL/Thu Jul 27, 2023/PCN-SIL-035-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Vishay Siliconix Announces Site Transfer of Wafer Fabrication for Commercial Power MOSFET For further information, please contact your regional Vishay office. Description of Change: To meet increasing demand with more flexibility for power MOSFETs, Vishay Siliconix now is in the process of site transfer of wafer fabrication on commercial TrenchFET® Gen-IV Power MOSFET, SISA72ADN-T1-GE3, to the foundry partner Tower Semiconductor. Tower Semiconductor has been a subcontracting partner of Vishay Siliconix since 1995. Founded in 1993, Tower Semiconductor is a worldwide supplier for foundry services of wafer manufacturing. Tower Semiconductor locates in Migdal Haemak, Israel, and has achieved the… download now
2023_PCN-SIL-022-2023-Rev0.pdf Product Group: SIL/Thu Apr 27, 2023/PCN-SIL-022-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Additional Backmetal Capability - SQM40P10-40L, SQD19P06-60L and SQD40P10-40L For further information, please contact your regional Vishay office. Description of Change: Qualification of the Vishay Simconix assembly and test facility in Shanghai, China, for automotive wafer back-metal processing. This facility is currently our main location for processing commercial wafer back-metal. This extension to automotive wafers provides additional capacity to service immediate needs and also provides a backup facility as part of our business continuity planning. The package types included are TO-252 and TO-263. This PCN is for part numbers SQM40P10-40L, SQD19P06-60L and SQD40P10-40L. Due to capacity… download now
2023_PCN-SIL-021-2023-Rev0.pdf Product Group: SIL/Tue Apr 18, 2023/PCN-SIL-021-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Vishay Siliconix Announces New Solder Plating Site "Welnew-Shanghai" is Qualified for Commercial Power MOSFET For further information, please contact your regional Vishay office. Description of Change: Due to the fire accident in Jan-2023, the original plating subcon of Vishay Siliconix, Welnew-Wuxi, is suspended and will be entirely replaced by the new site in Shanghai, China (Welnew-Shanghai). This full release of Welnew-Shnaghai applies to commercial product packages with copper lead-frame assembled in Simconix in Shanghai. Welnew-Shanghai was founded in 2006 as a leading provider of Hall sensor products, semiconductor process service, and equipments. Welnew-Shanghai has achieved the certifications,… download now
2023_PCN-SIL-020-2023-Rev0.pdf Product Group: SIL/Tue Apr 11, 2023/PCN-SIL-020-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 PI Material Improved Definition Process Change May 2023 For further information, please contact your regional Vishay office. Description of Change: Change of Polyimide material from DUR 116A to LTC 9320 using a photo defined process. There will be no limitation in performance or reliability. Please note this is the same process change as prior PCN-SIL-0112022 (PI Material Improved Definition Process Change) that you may have received in June 2022. This PCN represents the next set of parts to receive the new PI material. If you have already approved the prior PCN, the qualification data and process change for these parts are exactly the same and your expedited approval of the PCN is requested.… download now
2023_PCN-SIL-018-2023-Rev1.pdf Product Group: SIL/Wed Jun 7, 2023/PCN-SIL-018-2023-REV-1 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Vishay Siliconix Announces New Material of Solder Paste for Commercial Power MOSFETs in PowerPAK® SO-8 and SO-8 Package (update the subject of PCN-SIL-018-2023-REV-0) For further information, please contact your regional Vishay office. Description of Change: To continue the supply of target commercial power MOSFETs, Vishay Siliconix announces the new solder paste, Pb95Sn5, is adopted in PowerPAK® SO-8 and SO-8 package to replace the original material, Pb88Sn10Ag2, for the yield improvement. Classification of Change: Yield Improvement Expected Influence on Quality/Reliability/Performance: will be no effect on quality, reliability, performance, and the minimum/maximum values in the datasheet. The material… download now
2023_PCN-SIL-018-2023-Rev0.pdf Product Group: SIL/Fri May 26, 2023/PCN-SIL-018-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Vishay Siliconix Announces New Material of Solder Paste & Stamp Clip for Commercial Power MOSFETs in PowerPAK® SO-8 and SO-8 Package For further information, please contact your regional Vishay office. Description of Change: To continue the supply of target commercial power MOSFETs, Vishay Siliconix announces the new solder paste, Pb95Sn5, is adopted in PowerPAK® SO-8 and SO-8 package to replace the original material, Pb88Sn10Ag2, for the yield improvement. Classification of Change: Yield Improvement Expected Influence on Quality/Reliability/Performance: There will be no effect on quality, reliability, performance, and the minimum/maximum values in the datasheet. The material composition of Die-Attach… download now
2023_PCN-SIL-016-2023-Rev0.pdf Product Group: SIL/Fri Mar 10, 2023/PCN-SIL-016-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Vishay Siliconix Announces Additional Conversion to Copper Bondwire for Commercial Power MOSFET (SI1308EDL-T1-GE3) For further information, please contact your regional Vishay office. Description of Change: Vishay Siliconix announces the qualification is completed for production of SI1308EDL-T1-GE3 with copper bond-wire in SC- 70 (3 leads) package. Manufacturing of this TrenchFET® MOSFET in SC-70 with copper wire will be added into Vishay Siliconix Copper-Wire product families that have been in production since November 2007. Classification of Change: Part of continued quality improvement program Expected Influence on Quality/Reliability/Performance: There will be no effect on quality, reliability,… download now
2023_PCN-SIL-014-2023-Rev0.pdf Product Group: SIL/Fri Mar 10, 2023/PCN-SIL-014-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Vishay Siliconix Announces New Material of Solder Paste & Stamp Clip for Commercial Power MOSFETs in PowerPAK® SO-8L Package For further information, please contact your regional Vishay office. Description of Change: To continue the supply of target commercial power MOSFETs, Vishay Siliconix announces the new solder paste, Pb95Sn5, is adopted in PowerPAK® SO-8L package to replace the original material, Pb88Sn10Ag2, for the yield improvement. Besides, the stamp clip from PDE, “37-4365-1”, is assembled in PowerPAK® SO-8L package with 2mil die for commercial products at Simconix. PDE is one of the qualified suppliers of Simconix with the quality system has been certified by ISO-140001 and IATF-16949.… download now
2023_PCN-SIL-013-2023-Rev0.pdf Product Group: SIL/Fri Mar 10, 2023/PCN-SIL-013-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Vishay Siliconix Announces Top-Metal Material Change from Ni-Au to Ni-Pd-Au for Commercial Power MOSFETs For further information, please contact your regional Vishay office. Description of Change: The top-metal material change from Ni-Au to Ni-Pd-Au for SIZ998DT-T1-GE3. Classification of Change: Process consolidation and increasing assembly process window. Expected Influence on Quality/Reliability/Performance: This change of the top-matel will not affect the fit, form, and functions of the device. Part Numbers/Series/Families Affected: SIZ998DT-T1-GE3 Vishay Brand(S): Vishay Siliconix Time Schedule: Start Shipment Date: Fri May 12, 2023 Sample Availability: Please contact your regional Vishay Sales… download now
2023_PCN-SIL-002_1-2023-Rev1.pdf Product Group: SIL/Thu Mar 2, 2023/PCN-SIL-002_1-2023-REV-1 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Vishay Siliconix Announces Site Transfer of Wafer Fabrication for Commercial Power MOSFET (update with the fab-code info and affected part numbers) For further information, please contact your regional Vishay office. Description of Change: To meet increasing demand for Power MOSFET products, Vishay Siliconix is in the process of transfer of wafer fabrication on commercial 300M platform of TrenchFET® Power MOSFET products to foundry partner, Silan Microchip Manufacturing Co., Ltd. (Silan). Silan has been a subcontracting partner of Vishay Siliiconix; founded in September 1997 as a high-tech enterprise specializing in IC design and the manufacturing of semiconductor microelectronics-related products. In… download now
2023_PCN-SIL-002_1-2023-Rev0.pdf Product Group: SIL/Tue Feb 21, 2023/PCN-SIL-002_1-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Vishay Siliconix Announces Site Transfer of Wafer Fabrication for Commercial Power MOSFET For further information, please contact your regional Vishay office. Description of Change: To meet increasing demand for Power MOSFET products, Vishay Siliconix is in the process of transfer of wafer fabrication on commercial 300M platform of TrenchFET® Power MOSFET products to foundry partner, Silan Microchip Manufacturing Co., Ltd. (Silan). Silan has been a subcontracting partner of Vishay Siliiconix; founded in September 1997 as a high-tech enterprise specializing in IC design and the manufacturing of semiconductor microelectronics-related products. In 2018, a wafer production line for 12-inch chips and an… download now
2023_PCN-SIL-000415-2023-Rev0.pdf Product Group: SIL/Thu Sep 28, 2023/PCN-SIL-000415-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 DG411LE, DG412LE, DG413LE Test condition change For further information, please contact your regional Vishay office. Description of Change: DG411LE, DG412LE, DG413LE Test condition changed from 2.7V to 3V and specification limits are tighten Reason for Change: Forr better product quality and reliability Expected Influence on Quality/Reliability/Performance: There will be no effect on performance, quality or reliability. Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Siliconix Time Schedule: Start Shipment Date: Tue Nov 28, 2023 Sample Availability: Samples are available now Product Identification: Date Code Qualification Data:… download now
2023_PCN-SIL-000411-2023-Rev0.pdf Product Group: SIL/Fri Sep 8, 2023/PCN-SIL-000411-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Additional Assembly Capacity for Vishay Siliconix MSOP8 and MSOP10 Analog Switches For further information, please contact your regional Vishay office. Description of Change: Vishay Siliconix has expanded assembly capacity for MSOP8 and MSOP10 packages to Subcontractor UTAC in Thailand, qualified with copper wire. Reason for Change: Addition of Assembly Capacity Expected Influence on Quality/Reliability/Performance: There will be no effect on performance, but higher quality and reliability Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Siliconix Time Schedule: Start Shipment Date: Thu Nov 9, 2023 Sample Availability: Samples are… download now
2023_PCN-SIL-000405-2023-Rev1.pdf Product Group: SIL/Tue Jul 4, 2023/PCN-SIL-000405-2023-REV-1 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Additional Assembly Capacity for Vishay Siliconix PDIP 8 For further information, please contact your regional Vishay office. Description of Change: Vishay Siliconix has expanded assembly capacity for PDIP8 packages to Subcontractor ATEC in the Philippines. Classification of Change: Addition of Assembly Capacity Expected Influence on Quality/Reliability/Performance: There will be no effect on performance, but higher quality and reliability. Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Siliconix Time Schedule: Start Shipment Date: Mon Sep 4, 2023 Sample Availability: Samples are available now Product Identification: Lot Number and… download now
2023_PCN-SIL-000405-2023-Rev0.pdf Product Group: SIL/Fri Jun 30, 2023/PCN-SIL-000405-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Additional Assembly Capacity for Vishay Siliconix PDIP 8 For further information, please contact your regional Vishay office. Description of Change: Vishay Siliconix has expanded assembly capacity for PDIP8 packages to Subcontractor ATEC in the Philippines. Classification of Change: Addition of Assembly Capacity Expected Influence on Quality/Reliability/Performance: There will be no effect on performance, but higher quality and reliability. Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Siliconix Time Schedule: Start Shipment Date: Sat Dec 30, 2023 Sample Availability: Samples are available now Product Identification: Lot Number and… download now
2023_PCN-SF-362-2023-Rev0.pdf Product Group: SF/Tue Dec 5, 2023/PCN-SF-362-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 PCN - INTRODUCTION OF ALTERNATIVE GREASES ON PANEL POTENTIOMETER MODELS P12, P13, P13SM, P16, PA16, P16S, PA16S, T12, T13 For further information, please contact your regional Vishay office. Description of Change: Introduction of an alternative grease Reason for Change: Due to discontinuation of grease material, we have secured grease provision thanks to a new grease source. Grease is used to reduce wear between wiper and collector/resistive track and for electrical noise reduction. We have qualified this alternative grease. If you require a specific qualification process, please let us know ASAP Expected Influence on Quality/Reliability/Performance: No influence on Quality/Reliability/Performance,… download now
2023_PCN-SF-352-2023-Rev0.pdf Product Group: SF/Tue Oct 10, 2023/PCN-SF-352-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Alternative circlips for potentiometer For further information, please contact your regional Vishay office. Description of Change: Activation of alternative circlips (=retaining ring) Reason for Change: Remove the risk of obsolescence for the previous reference Expected Influence on Quality/Reliability/Performance: No. Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay MCB Time Schedule: Start Shipment Date: Sun Dec 10, 2023 Sample Availability: 10/10/2023 Product Identification: Date code will be available on request to Quality Contact (Yohann Bourillon) Qualification Data: Qualification report available This PCN is considered approved,… download now
2023_PCN-SF-351-2023-Rev0.pdf Product Group: SF/Tue Oct 3, 2023/PCN-SF-351-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 INTRODUCTION OF ALTERNATIVE GREASES ON P10 MODEL MODEL For further information, please contact your regional Vishay office. Description of Change: Introduction of an alternative grease Reason for Change: Due to discontinuation of grease material, we have secured grease provision thanks to a new grease source. Grease is used to reduce wear between wiper and collector and for electrical noise reduction. We have qualified this alternative grease. If you require a specific qualification process, please let us know ASAP Expected Influence on Quality/Reliability/Performance: No influence on Quality/Reliability/Performance, according to qualification results Part Numbers/Series/Families Affected: P10XC*, P10XX*,… download now
2023_PCN-SF-350-2023-Rev0.pdf Product Group: SF/Fri Sep 29, 2023/PCN-SF-350-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Sfernice- P-RV/CNW-PRA product families- Laser marking instead of tampography marking For further information, please contact your regional Vishay office. Description of Change: Due to the discontinuation of the marking ink for tampography process and spare parts no more available, Vishay Sfernice will be implementing a new marking process with Laser on all networks PRA/PRAHR/PRAHT/CNW/CNWHR/CNWHT and P/PHR/PHT/RV part numbers with marking options (R0013/R0014/R0109/R0110). Reason for Change: Cancelling of dirty operation. Raw Material (ink) not more available and CMR. Quality continuous improvement. Expected Influence on Quality/Reliability/Performance: The new marking method have no impact on the Fit,… download now
2023_PCN-SF-349-2023-Rev0.pdf Product Group: SF/Mon Sep 25, 2023/PCN-SF-349-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 INTRODUCTION OF ALTERNATIVE GREASES ON P11A, 148, P11D, 248 MODEL For further information, please contact your regional Vishay office. Description of Change: Introduction of an alternative grease Reason for Change: Due to discontinuation of grease material, we have secured grease provision thanks to a new grease source. Grease is used to reduce wear between wiper and collector and for electrical noise reduction. We have qualified this alternative grease. If you require a specific qualification process, please let us know ASAP Expected Influence on Quality/Reliability/Performance: No influence on Quality/Reliability/Performance, according to qualification results Part Numbers/Series/Families Affected:… download now
2023_PCN-SF-338-2023-Rev0.pdf Product Group: SF/Wed Sep 27, 2023/PCN-SF-338-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 TSM4 General product evolution For further information, please contact your regional Vishay office. Description of Change: Product, Packaging and manufacturing site change Reason for Change: Product range Rationalization to avoid obsolescence Expected Influence on Quality/Reliability/Performance: No influence on Quality / Reliability / Performance Part Numbers/Series/Families Affected: TSM4* Vishay Brand(S): Vishay Sfernice Time Schedule: Start Shipment Date: Mon Jan 1, 2024 Sample Availability: W47 Product Identification: position of the trimmer marking Qualification Data: Available on request This PCN is considered approved, without further notification, unless we receive specific customer concerns… download now
2023_PCN-SF-337-2023-Rev0.pdf Product Group: SF/Thu Jun 8, 2023/PCN-SF-337-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Sfernice-CHP product families Epoxy protective layer modification For further information, please contact your regional Vishay office. Description of Change: Due to the discontinuation of the epoxy layer of the CHP product families, Vishay Sfernice is using a new protective layer. The new epoxy Layer has a blue color. Products specifications remain unchanged. Ohmic values below 0.5 Ohms won't be affected. Classification of Change: Old Epoxy obsolescence. Expected Influence on Quality/Reliability/Performance: The new protective layer will have no impact on the Fit, Function and reliability of the devices. Part Numbers/Series/Families Affected: CHP*, HCHP*, CHPHT*, CHPHR*, CHPFR* Vishay Brand(S): Vishay… download now
2023_PCN-SF-325-2023-Rev0.pdf Product Group: SF/Fri Mar 10, 2023/PCN-SF-325-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 M63 M70 SERIES - PRODUCTION MOVE (Blatna CZ to Volary CZ) For further information, please contact your regional Vishay office. Description of Change: Assembly line moves from Blatna factory (CZ) to Volary factory (CZ) Classification of Change: Rationalization of resources and production capacities Expected Influence on Quality/Reliability/Performance: None Part Numbers/Series/Families Affected: M63*, M70*, Vishay Brand(S): Vishay Sfernice Time Schedule: Start Shipment Date: Mon May 15, 2023 Sample Availability: May 15th 2023 Product Identification: Date code Qualification Data: Data available on Request This PCN is considered approved, without further notification, unless we receive specific customer… download now
2023_PCN-SF-0341-2023-Rev0.pdf Product Group: SF/Thu Jun 22, 2023/PCN-SF-0341-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Production Move for some LTO100 Resistors from Vishay CZ to Vishay CN. For further information, please contact your regional Vishay office. Description of Change: Production Move for some LTO100 Resistors. Qualification of Vishay Shatian China as new manufacturing site. Classification of Change: Procurement safety and increase of capacity. Vishay wants to keep high service level and increases capacity with Vishay Shatian China manufacturing for some LTO100 part numbers. Expected Influence on Quality/Reliability/Performance: None Part Numbers/Series/Families Affected: LTO100F50R00FTE3, LTO100F18001JTE3, LTO100F1R000JTE3, Vishay Brand(S): Vishay Sfernice Time Schedule: Start Shipment Date: Sat Sep 23,… download now
2023_PCN-SF-0317-2023-Rev0.pdf Product Group: SF/Tue Jun 27, 2023/PCN-SF-0317-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 D2TO Tape & Reel packaging change: new tape design For further information, please contact your regional Vishay office. Description of Change: D2TO Tape design change. See attached drawing. Reason for Change: In line with our commitment for continuous improvement, Vishay Sfernice is changing the tape design for the D2TO020 and D2TO035 packaged in Tape & Reel. Reel dimensions remain the same. All product specification remain unchanged. Expected Influence on Quality/Reliability/Performance: None Part Numbers/Series/Families Affected: D2TO*RE3 Vishay Brand(S): Vishay Sfernice Time Schedule: Start Shipment Date: Tue Apr 23, 2024 Sample Availability: July, 15, 2023 Product Identification: Date Code… download now
2023_PCN-SF-0315-2022-Rev0.pdf Product Group: SF/Mon Oct 24, 2022/PCN-SF-0315-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT LTO100 & LTO100H Manufacturing location change and qualification of a new internal soldering alloy DESCRIPTION OF CHANGE: LTO100 & LTO100H Manufacturing location change from Vishay Volary CZ to Vishay Blatna CZ. Qualification of a new internal soldering alloy (Silver paste) from an AgPd and RoHS-with-exemptions glass to an AgPd and RoHS glass. REASON FOR CHANGE: Capacity expansion and raw material procurement safety EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: None PART NUMBERS/SERIES/FAMILIES AFFECTED: LTO100F*, LTO100H*, VISHAY BRAND(s): Vishay Sfernice TIME SCHEDULE: Start Shipment Date: Mon Mar 13, 2023 SAMPLE AVAILABILITY: Feb, 13th 2023 PRODUCT IDENTIFICATION: Date Code… download now
2023_PCN-SF-00332-2023-Rev0.pdf Product Group: SF/Tue Sep 12, 2023/PCN-SF-00332-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 LASER MARKING SPECTROL - VARIOUS SERIES 100 / 121/ 122 / 128 / 132 / 138 / 139 / 140 / 142 / 170 / 171 / 172 / 200 / 202 / 208 300 / 301 / 302 / 308 / 401 / 701 / 702 / 708 / 801 / 802 / 830 / 852 / 860 / 871 For further information, please contact your regional Vishay office. Description of Change: Usage of laser marking as alternative to ink marking. Reason for Change: Limit ink consumption as part of continuous process improvement. Expected Influence on Quality/Reliability/Performance: None Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Spectrol Time Schedule: Start Shipment Date: Mon Dec 18, 2023 Sample Availability: Samples… download now
2023_PCN-SF-00323-2023-Rev0.pdf Product Group: SF/Fri Jan 20, 2023/PCN-SF-00323-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 SPECTROL WIREWOUND MULTITURNS POSITION SENSORS INTRODUCTION OF A NEW LUBRICANT ON SERIES : 162 /164 /502 / 552 / 802 / 830 / 852 / 860 / 872 / 500 For further information, please contact your regional Vishay office. Description of Change: Introduction of an alternative lubricant for the lubrication of the sliding contact of various wirewound multiturn Series (all ohmic values). Classification of Change: The current lubricant is obsolete. Expected Influence on Quality/Reliability/Performance: None Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Spectrol Time Schedule: Start Shipment Date: Mon Sep 25, 2023 Sample Availability: Yes - On… download now
2023_PCN-OPT-1300-2023-Rev0.pdf Product Group: OPT/Fri Nov 3, 2023/PCN-OPT-1300-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 10 MBd open collector high speed coupler series production site transfer For further information, please contact your regional Vishay office. Description of Change: The detector chip currently used on the 10 MBd high-speed optocouplers has been discontinued. To ensure supply and to remain cost competitive, the production of these parts will be transferred to one of our sub-contractors where a different chip set has been qualified. There is no impact on the function of the part. Reason for Change: Transfer to another production site Expected Influence on Quality/Reliability/Performance: No influence on quality, reliability and performance expected. Nevertheless, we request our customers to test the… download now
2023_PCN-OPT-1298-2023-Rev0.pdf Product Group: OPT/Fri Nov 3, 2023/PCN-OPT-1298-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 VO2223 series production line transfer For further information, please contact your regional Vishay office. Description of Change: The VO2223 power phototriac is manufactured in our Krubong, Malaysia plant. With the implementation of an improved lead frame, mold material, and state-of-the-art MOCVD emitter, the VO2223 will be manufactured on a different production line within the same plant. Reason for Change: Transfer to another production line with introduction of new leadframe, mold material and emitter chip. Expected Influence on Quality/Reliability/Performance: No influence on quality, reliability and performance expected. Nevertheless, we request our customers to test the product in their… download now
2023_PCN-OPT-1295-2023-Rev0.pdf Product Group: OPT/Mon Aug 28, 2023/PCN-OPT-1295-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Change in datasheet for the affected parts under PCN OPT-1282-2023 For further information, please contact your regional Vishay office. Description of Change: With reference to the PCN OPT-1282-2023, issued on 07-06-2023 Vishay already introduced an alternative combination of infrared light emitting diode (IRLED) and photovoltaic generator (PVG). Unfortunately, it was missed to inform about some parameter changes in the datasheet. Along with the parameters mentioned in the attached customer letter the current limitation functionality where applicable won't be supported anymore for the affected parts. We require to test the product in customers application. We recommend to implement this current… download now
2023_PCN-OPT-1294-2023-Rev0.pdf Product Group: OPT/Wed Aug 9, 2023/PCN-OPT-1294-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Radiant Flux Improvement VLMU35CB2x-275-120 and VLMU35CT2x-275- 120 series For further information, please contact your regional Vishay office. Description of Change: Due to continuous improvement of the EPI material performance the radiant flux of VLMU35CT2*- and VLMU35CB2*-series will be increased by 20% to 40%. Reason for Change: The fast developing UV LED technology requires a high flexibility adjusting specifications to the current improvements. Expected Influence on Quality/Reliability/Performance: Improved performance and reliability. Part Numbers/Series/Families Affected: VLMU35CB20-275-120, VLMU35CB21-275-120, VLMU35CT20-275-120, VLMU35CT21-275-120, Vishay Brand(S): Vishay Semiconductors Time… download now
2023_PCN-OPT-1289-2023-Rev0.pdf Product Group: OPT/Wed Aug 9, 2023/PCN-OPT-1289-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Introduction of new in-house IC for MiniCast Methone products For further information, please contact your regional Vishay office. Description of Change: The new in-house designed "Cyllene 2" IC will replace the "Methone" IC in existing Product Series without a name change. It will provide similar electrical and optical characteristics, at nearly 50 percent less current consumption. Besides it provides the best receiving range in bright ambient. The mechanical dimensions remain unchanged. We require to test the product in customers application. Reason for Change: The existing IC supplier has announced to end production. To assure a long-term product availability, Vishay has designed a new IC with… download now
2023_PCN-OPT-1286-2023-Rev0.pdf Product Group: OPT/Wed Jul 12, 2023/PCN-OPT-1286-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Alternative detector chip source for VOT8024A, VOT8025A, VOT8026A, VOT8123A, VOT8125A series For further information, please contact your regional Vishay office. Description of Change: Alternative detector chip source for VOT8024A, VOT8025A, VOT8026A, VOT8123A, VOT8125A series Classification of Change: Alternative detector chip source Expected Influence on Quality/Reliability/Performance: There is no impact on the form, fit, or function. Quality and performance remain the same Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Semiconductors Time Schedule: Start Shipment Date: Sat Sep 30, 2023 Sample Availability: Components with the change… download now
2023_PCN-OPT-1284-2023-Rev0.pdf Product Group: OPT/Wed Jun 28, 2023/PCN-OPT-1284-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 New chipset and green mold compound for VOH1016A series For further information, please contact your regional Vishay office. Description of Change: New chipset and green mold compound for VOH1016A series Classification of Change: New chipset and green mold compound Expected Influence on Quality/Reliability/Performance: There is no impact on the form, fit, or function. Quality and performance remain the same. Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Semiconductors Time Schedule: Start Shipment Date: Sat Sep 30, 2023 Sample Availability: Components with the change implemented could start shipping on or after the start shipment date… download now
2023_PCN-OPT-1282-2023-Rev0.pdf Product Group: OPT/Wed Jun 7, 2023/PCN-OPT-1282-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Chip change for solid state relays and MOSFET driver For further information, please contact your regional Vishay office. Description of Change: To ensure trade compliance, Vishay will change the chipset of it's solid state relays and photovoltaic MOSFET driver on short notice. An alternative combination of infrared light emitting diode (IRLED) and photovoltaic generator (PVG) will be introduced immediately. The new combination was qualified and evaluated to sustain the part performance. MOSFETs of solid state relays remain unchanged. Classification of Change: The U.S. Department of Treasury's Office of Foreign Assets Control recently added a Vishay supplier located in Russia to its "Specially… download now
2023_PCN-OPT-1281-2023-Rev0.pdf Product Group: OPT/Thu Jun 15, 2023/PCN-OPT-1281-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 VCNL3020,VCNL4020,VCNL4020X01- Change in Chip For further information, please contact your regional Vishay office. Description of Change: Introduce the new state-of-the art Chip technology (MOCVD) to ensure long term availability of product series. Opto-Electronical performance tailored to fit closest to prior performance. Classification of Change: Introduce the new state-of-the art Chip technology (MOCVD) Expected Influence on Quality/Reliability/Performance: No influence on quality and reliability expected. Nevertheless, we recommend to test the product in customers application. Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay… download now
2023_PCN-OPT-1275-2023-Rev0.pdf M E M O R A N D U M Dear Customers, Earlier this year, we sent a PCN (PCN -OPT -1275 -2023 -REV -0) announcing a change in chip for our TSHF series. As mentioned in the PCN, the implementation date was set to 01 st September 2023 . Due to delivery constraints, we cannot start the shipment as planned. The new shipment date will be set for 01 st December 2023. The new datasheet s are available on our webpage. Till then, we will be supplying the part s with the old chip. Thank you for your understanding. Best Regards Mohan Kumar Kannusamy Director, Product Marketing Sensors Vishay Semiconductor GmbH Germany P +49 -7131 -7498 -607 E Mohankumar.kannusamy@vishay.com Product Group: OPT/Thu May 11, 2023/PCN-OPT-1275-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 TSHF5210, TSHF6210, TSHF5410, TSHF6410 -… download now
2023_PCN-OPT-1272-2023-Rev0.pdf Product Group: OPT/Fri Jul 21, 2023/PCN-OPT-1272-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Optocoupler: New Lead Frame Plating Layer, Alternative Infrared Emitter, and Standard 25 µm Wire Bond For further information, please contact your regional Vishay office. Description of Change: Vishay Opto has made significant advancements in our in-house emitter technology, in our lead-frame plating processes, and in our use of 25 µm gold bond wire. These advancements result in improved reliability, expanded production capacity, and harmonized manufacturing processes. 1. Alternative Infrared Emitter - All the optocouplers associated with this PCN have been qualified to use our MOCVD in-house infrared emitter. 2. Lead-frame Plating Process - All DIL-4 (SFH6156, SFH615A, VO615A Opt. 5) and SSOP… download now
2023_PCN-OPT-1271-2023-Rev0.pdf Product Group: OPT/Wed Apr 19, 2023/PCN-OPT-1271-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 VCNL4020X01: Change of wafer diameter for Ambient light & Proximity photo diodes For further information, please contact your regional Vishay office. Description of Change: Due to discontinuation of 4" silicon wafers, 6" wafers will be used for chip production. There is no change in performance, datasheet or form factor of the affected components. Classification of Change: 4" silicon wafers are discontinued by the supplier. Expected Influence on Quality/Reliability/Performance: No change in quality, reliability and performance. Nevertheless, we recommend to test the product in customers application. Part Numbers/Series/Families Affected: VCNL4020X01-GS08, VCNL4020X01-GS18, Vishay Brand(S): Vishay… download now
2023_PCN-OPT-1268-2023-Rev0-VERSION-22075.pdf Product Group: OPT/Wed Apr 12, 2023/PCN-OPT-1268-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 INTRODUCTION OF A NEW LEAD FRAME PLATING For further information, please contact your regional Vishay office. Description of Change: Vishay is introducing a new lead frame plating. There is no change in the design as well as in the used packaging material. Classification of Change: This change will be introduced as a result of Vishay's continuous improvements. Expected Influence on Quality/Reliability/Performance: There is no change in form, fit, or function. The datasheet minimum and maximum performance parameters will remain the same. As there is no change in the safety parameters, the existing UL, VDE, and other agency safety certifications remain valid. Part Numbers/Series/Families Affected:… download now
2023_PCN-OPT-1264-2023-Rev0.pdf Product Group: OPT/Fri May 26, 2023/PCN-OPT-1264-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Second source of emitter chip for IL4x and BRTx series For further information, please contact your regional Vishay office. Description of Change: Introduction of an alternative, Vishay-fabricated emitter chip Classification of Change: To ensure product availability, Vishay introduces an alternative, in-house fabricated infrared emitter chip to be used in the IL4X and BRTx phototriacs. It will be used interchangeably with the current emitter. Expected Influence on Quality/Reliability/Performance: There is no impact on the form, fit, or function. Quality and performance remain the same. Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay… download now
2023_PCN-OPT-1259-2023-Rev0.pdf Product Group: OPT/Tue Feb 21, 2023/PCN-OPT-1259-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Change of Assembly location: VCNT2020 (Reflective sensor) For further information, please contact your regional Vishay office. Description of Change: Currently our VCNT2020 is assembled at Krubong Malaysia and this will be transfered to the assembly location in Bankgkok, Thailand. Classification of Change: Th new location (Bankgkok, Thailand) has been installed with additonal capacity to meet the increasing market demands. Expected Influence on Quality/Reliability/Performance: No influence on quality and reliability expected. Nevertheless, we recommend to test the product in customers application. The device from the new location will have some advantages. Appearance: Notch to identify Pin 1 & Tie-bar… download now
2023_PCN-OPT-1257-2022-Rev0.pdf Product Group: OPT/Fri Jul 14, 2023/PCN-OPT-1257-2022-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Changes of materials for TFDU4101-TT3 and TFDU4101-TR3 For further information, please contact your regional Vishay office. Description of Change: -Introduction of a new in-house designed IRDC IC. The Chaldene IC provides 20 percent longer distance (in meters) and improved ESD robustness from current 1kV to 2kV. -Introduction of a new Surface Emitting Technology Chip. -Changeover of the Au wire Diameter from 30um to 25um. We recommend to test the product in customers application. Classification of Change: - New IC: The existing external IC Supplier will end the production. In order to assure a long-term product availability of IRDC products, Vishay developed an inhouse IC in cooperation with the… download now
2023_PCN-OPT-1233-2022-Rev0.pdf Product Group: OPT/Mon Mar 20, 2023/PCN-OPT-1233-2022-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Changes of materials for TFBS4xxx IRDC Product Series For further information, please contact your regional Vishay office. Description of Change: -Introduction of a new in-house designed IRDC IC. The Chaldene IC provides 20 percent longer distance (in meters) and improved ESD robustness from current 1kV to 2kV. -Introduction of a new Surface Emitting Technology Chip. -Changeover of the Au wire Diameter from 30um to 25um. We recommend to test the product in customers application. Classification of Change: - New IC: The existing external IC Supplier will end the production. In order to assure a long-term product availability of IRDC products, Vishay developed an inhouse IC in cooperation with the worlds… download now
2023_PCN-NLR-014-2023-Rev0.pdf Product Group: NLR/Mon Dec 4, 2023/PCN-NLR-014-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Change to 100% Pb-free TFPT For further information, please contact your regional Vishay office. Description of Change: Vishay has the intention to eliminate the use of lead (Pb) containing materials in the manufacturing process used for current TFPT series (RoHS using exemption 7(c)-I from EU Directive). The new materials used are 100% Pb-free. To illustrate the better environmental compatibility, the color of the topcoat changes to black, and the marking with the coded nominal value on the component is omitted. Reason for Change: RoHS compliancy (without exemptions) Expected Influence on Quality/Reliability/Performance: None Part Numbers/Series/Families Affected: Please see materials list on the… download now
2023_PCN-NLR-013-2023-Rev0.pdf Product Group: NLR/Wed Nov 22, 2023/PCN-NLR-013-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Change of coating material for selected PTC For further information, please contact your regional Vishay office. Description of Change: Vishay has the intention to change the material of the blue silicone coating used for selected PTC listed in detail below Reason for Change: More flexibility, in line with product contingency planning Expected Influence on Quality/Reliability/Performance: none Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay BCcomponents Time Schedule: Start Shipment Date: Fri May 31, 2024 Sample Availability: samples are availlable on request Product Identification: By date code and lot number Qualification Data:… download now
2023_PCN-NLR-011-2023-Rev0.pdf Product Group: NLR/Fri Oct 6, 2023/PCN-NLR-011-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Change of coating material for selected NTCLE series For further information, please contact your regional Vishay office. Description of Change: Vishay has the intention to change the material of the blue silicone coating used for selected NTCLE series listed in detail below Reason for Change: More flexibility, in line with product contingency planning Expected Influence on Quality/Reliability/Performance: None Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay BCcomponents Time Schedule: Start Shipment Date: Wed May 1, 2024 Sample Availability: Upon request Product Identification: By date code and lot number Qualification Data: Available… download now
2023_PCN-NLR-007-2023-Rev0.pdf Product Group: NLR/Tue Aug 22, 2023/PCN-NLR-007-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Addition of new supplier for coating material for custom specific part: NTCLE201E3C90287 For further information, please contact your regional Vishay office. Description of Change: Vishay has the intention to add a second supplier of the epoxy powder (coating material) used for custom NTCLE201E3C90287 (CPN: A2C00046666) Reason for Change: More flexibility, in line with product contingency planning Expected Influence on Quality/Reliability/Performance: None Part Numbers/Series/Families Affected: NTCLE201E3C90287 Vishay Brand(S): Vishay BCcomponents Time Schedule: Start Shipment Date: Mon Apr 1, 2024 Sample Availability: Samples available upon request Product Identification: By date code and lot number… download now
2023_PCN-NLR-005-2023-Rev0.pdf Product Group: NLR/Tue Aug 22, 2023/PCN-NLR-005-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Addition of new supplier for coating material for selected NTCLE and NTCA series For further information, please contact your regional Vishay office. Description of Change: Vishay has the intention to add a second supplier of the epoxy powder (coating material) used for selected NTCLE and NTCA series listed in detail below Reason for Change: More flexibility, in line with product contingency planning Expected Influence on Quality/Reliability/Performance: None Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay BCcomponents Time Schedule: Start Shipment Date: Fri Mar 1, 2024 Sample Availability: Samples available upon request Product… download now
2023_PCN-MLC-00008-2022-Rev0.pdf Product Group: MLC/Mon Nov 21, 2022/PCN-MLC-00008-2022-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 SMD MLCC, Thickness Increase 2225 body size, 39 nF and 47 nF, 2KV For further information, please contact your regional Vishay office. Description of Change: Increase maximum thickness from 2.18mm to 2.70mm Classification of Change: Process improvement Expected Influence on Quality/Reliability/Performance: Improved performance Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Vitramon Time Schedule: Start Shipment Date: Mon May 1, 2023 Sample Availability: Available now Product Identification: VJ OMD series and VJ Non-Magnetic series Qualification Data: Upon request This PCN is considered approved, without further notification, unless we… download now
2023_PCN-MLC-00002-2023-Rev0.pdf Product Group: MLC/Thu May 18, 2023/PCN-MLC-00002-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 VJ Non-Magnetic Series for Reflow Soldering change to NP0 ceramic for select values. For further information, please contact your regional Vishay office. Description of Change: Change of NP0 dielectric formulation for body sizes and values: 0402, 1 pF to 18 pF; 0603, 1 pF to 47 pF; 0805, 1 pF to 82 pF; 1206, 1 pF to 82 pF; 1210, 1 pF to 82 pF; 1808, 27 pF to 33 and 39 pF to 56 pF (up to 200V only); 1812, 27 pF. Classification of Change: Improved processing. Expected Influence on Quality/Reliability/Performance: No change. Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Vitramon Time Schedule: Start Shipment Date: Fri Aug 18, 2023 Sample… download now
2023_PCN-ECN202105001.pdf SD/RD-003 Form 6 -F Engineering Change Notification （ ECN ） ECN No.: EC N202105001 Customer: Date: 06.03.2023 Change Items: □Design □Process █Product discontinue □Others Subject of Change: Streamlining of discrete IGBT portfolio. Description of change : . Discontinued part number Suggested Replacement DG100X07T2 DG1 20X07T2 DG10N12T2 DG10 X12T2 DG25F12T2 DG25 H12T2 DG30X06T2 DG30X0 7T2 DG40Q12T2L DG40Q12T2LZ DG50X06T2 DG50X07T2 DG75Q12T2 DG75H12T2 Reason of change: • Reduction of chip variety to better respond to customer demands. First samples available Actual Delivery time 6 weeks Last order date of unchanged product 1st of April , 2023 Last delivery date of unchanged product 30 th of June, 2023 Hereby notify the above: StarPower Semiconductor Ltd. 2022-12-22 Respond to this ECN: Customer confirmed. (Signature or stamp) Date: download now
2023_PCN-DR-00019-2022-Rev0.pdf Product Group: DR/Mon Nov 21, 2022/PCN-DR-00019-2022-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 WSL080500000Zyy9 - Mexico Production For further information, please contact your regional Vishay office. Description of Change: Juarez Mexico is being added as an additional manufacturing location. Production will continue in the existing location in Beer-Sheva, Israel and Columbus, Nebraska, USA. This will increase total production capacity to reduce lead time and support greater production flexibility. Classification of Change: Expanding capacity. Expected Influence on Quality/Reliability/Performance: None Part Numbers/Series/Families Affected: WSL080500000Z*9 Vishay Brand(S): Vishay Dale Time Schedule: Start Shipment Date: Mon Feb 6, 2023 Sample Availability: 01/04/2023 Product Identification:… download now
2023_PCN-DR-00017-2022-Rev0.pdf Product Group: DR/Mon Dec 19, 2022/PCN-DR-00017-2022-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 WSK1216 - Laser Ablation (0.0005 ohm only) For further information, please contact your regional Vishay office. Description of Change: Revision of the resistive element trimming process from laser cut to value to a machine punch to value and surface ablation to tolerance process. This will only affect the single resistance value of 0.0005 ohm. Classification of Change: To improve manufacturability to increase production capacity. Expected Influence on Quality/Reliability/Performance: No change to Fit or Function. Minor impact to Form. No change to footprint. Part Numbers/Series/Families Affected: WSK1216L5000* Vishay Brand(S): Vishay Dale Time Schedule: Start Shipment Date: Mon Jan 30, 2023 Sample… download now
2023_PCN-DR-00015-2023-Rev0.pdf Product Group: DR/Thu Oct 19, 2023/PCN-DR-00015-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 WSMS,WSBS,WSBM Shipping Tray Material Change For further information, please contact your regional Vishay office. Description of Change: Vishay Dale is changing the material that makes up the shipping trays from RHIPS (Recycled Hi-Impact Polystyrene) to rPET (Environmentally friendly plastic; Recyclable Polythylene Terephthalate). Reason for Change: The purpose of the change is to ensure continued reliability in material delivery while maintaining a focus on recyclable material. The strength of the trays will not be reduced with this change. The primary change will be a glossy finish with a deeper black color as seen above. Expected Influence on Quality/Reliability/Performance: Expect no change in… download now
2023_PCN-DR-00006-2023-Rev0.pdf Product Group: DR/Thu Jun 22, 2023/PCN-DR-00006-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Addition of Manufacturing Site (Las Torres) For further information, please contact your regional Vishay office. Description of Change: Juarez Mexico (Las Torres facility) is being added as an additional manufacturing location. Production will continue in the existing locations in Columbus NE USA, Juarez Mexico (Bermudez #1 facility), and Beer-Sheva Israel. This will increase total production capacity to reduce lead time and support greater production flexibility. Classification of Change: Due to anticipated market expansion and increasing sales volume, manufacturing is being expanded in Juarez, Mexico. The Las Torres location is ISO9001 and IATF16949 certified and is comparable to the Bermudez #1… download now
2023_PCN-DR-00005-2023-Rev0.pdf Product Group: DR/Thu Jun 22, 2023/PCN-DR-00005-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Addition of Manufacturing Site (Las Torres) For further information, please contact your regional Vishay office. Description of Change: Juarez Mexico (Las Torres facility) is being added as an additional manufacturing location. Production will continue in the existing locations in Columbus NE USA, Juarez Mexico (Bermudez #1 facility), and Beer-Sheva Israel. This will increase total production capacity to reduce lead time and support greater production flexibility. Classification of Change: Due to anticipated market expansion and increasing sales volume, manufacturing is being expanded in Juarez, Mexico. The Las Torres location is ISO9001 and IATF16949 certified and is comparable to the Bermudez #1… download now
2023_PCN-DR-00001-2023-Rev0.pdf Product Group: DR/Fri Jan 6, 2023/PCN-DR-00001-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Model WSL, WSL-18, & WSLP size 0805: Addition of Manufacturing Site For further information, please contact your regional Vishay office. Description of Change: Columbus, NE, USA is being added as a manufacturing location for the welded construction WSL0805, WSL0805- 18, & WSLP0805 part numbers. Production will continue in the existing location in Beer-Sheva Israel. This will increase total productioncapacity to improve availability and support greater production flexibility. Classification of Change: Due to high market demand, qualified manufacturing is being expanded to Columbus, NE, USA. The location is ISO9001 and IATF16949 certified and is currently producing Automotive grade products, such as… download now
2023_PCN-DI-00610-2023-Rev0.pdf Product Group: DI/Wed Aug 30, 2023/PCN-DI-00610-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Implementation of Advanced Automation (2nd Gen) to Supplement IHLP Inductor Production For further information, please contact your regional Vishay office. Description of Change: Vishay Inductors Division is pleased to announce the implementation of new advanced automation (Generation 2 Equipment) to supplement IHLP inductor production worldwide. The new equipment brings higher efficiency and even higher quality by utilizing the latest and most advanced automation for composite inductor production. At this time, only select Commercial Grade products are affected, specifically in the following case sizes: IHLP1616*, IHLP2020*, IHLP2525*, IHLP3232*, IHLP4040*, and IHLP5050*. There are plans to support… download now
2023_PCN-DD-037-2023-Rev0.pdf Product Group: DD/Mon Dec 4, 2023/PCN-DD-037-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Additional Wafer Fab Site Qualification For further information, please contact your regional Vishay office. Description of Change: To secure the supply chain for our customers, Vishay Semiconductor announces the qualification of in-house Wafer Fab located in Taipei, Taiwan for VS-GBPC Part Numbers. Reason for Change: Capacity increase and supply chain security Expected Influence on Quality/Reliability/Performance: There will be no effect on product quality, reliability, or performance Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Semiconductors Time Schedule: Start Shipment Date: Sat Jun 1, 2024 Sample Availability: Available upon request… download now
2023_PCN-DD-032-2023-Rev0.pdf Product Group: DD/Mon Nov 13, 2023/PCN-DD-032-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Front-end Process Consolidation for 200V TMBS Automotive Grade Products For further information, please contact your regional Vishay office. Description of Change: Vishay Diodes Division is announcing the front-end process consolidation for 200V TMBS (Trench MOS Barrier Schottky) automotive grade products at Vishay wafer fab in Taiwan. Please refer to annex 1 for change view and LTB/LTS information. Meanwhile, 200V TMBS in SMPC , SMP & SMF packages will also follow the change communicated in PCN-DD-037-2022 , PCN-DD-009-2023 and PCN-DD-027-2023 to introduce an additional in-house back-end manufacturing site in Kaohsiung, Taiwan. There will be no change in form, fit and function on all affected products.… download now
2023_PCN-DD-031-2023-Rev0.pdf Product Group: DD/Thu Nov 9, 2023/PCN-DD-031-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Additional In-House Backend Assembly Site for Commercial Rectifier Products in SMA Package For further information, please contact your regional Vishay office. Description of Change: To support BCP (Business Continuity Program), Vishay Diodes Division is introducing an additional in-house back-end manufacturing site for Commercial Grade products in SMA package (Case Outline: DO-214AC). This assembly site is located in Kaohsiung, Taiwan, and already has manufacturing experience in surface mount packaged products. There is no change in form, fit and function on all involved part numbers. Upon the approval of this PCN, all future and customized part number for related product in the same package will adopt… download now
2023_PCN-DD-028-2023-Rev0.pdf Product Group: DD/Wed Oct 11, 2023/PCN-DD-028-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Soldering material change in DBC-Base interface For further information, please contact your regional Vishay office. Description of Change: Vishay Semiconductors announces the use of solder paste between base and DBC in some MTC part numbers as a replacement of the existing solder preform. The solder paste is already used for die soldering process in the same products, so this change implies a materials consolidation into the production line. Reason for Change: Supply chain securement. Expected Influence on Quality/Reliability/Performance: There will be no effect on product quality, reliability or performance. Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay… download now
2023_PCN-DD-027-2023-Rev0.pdf Product Group: DD/Fri Oct 6, 2023/PCN-DD-027-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Additional In-House Backend Assembly Site for Automotive Grade Rectifier and TVS Products in SMF Package For further information, please contact your regional Vishay office. Description of Change: Vishay Diodes Division is introducing an additional in-house back-end manufacturing site for Automotive Grade products in SMF package (Case Outline: DO-219AB). This assembly site is locating in Kaohsiung, Taiwan. In addition, the label size, plastic reels and packing method will be consolidated to the same as now implementing for surface mount packages in the new location, please refer to annex 1 for change view. There is no change in form, fit and function on all involved part numbers. Upon the approval of this… download now
2023_PCN-DD-026-2023-Rev1.pdf Product Group: DD/Mon Dec 18, 2023/PCN-DD-026-2023-REV-1 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Molding Compound Change for selected D2PAK (TO-263AB) Pb-free Part Numbers For further information, please contact your regional Vishay office. Description of Change: Due to End-of-Life notification of molding compound supplier, Vishay Diodes Division is converting the mold compound used for some of the existing Pb-free part numbers in D2PAK (TO-263AB) package to Halogen Free compound that is already used in D2PAK (TO-263AB) & D2PAK 2L (TO-263AB 2L) production. Please refer to annex 1 for detail of concerned part numbers and LTB/LTS information. There is no change in form, fit and function on all involved part numbers. Upon the approval of this PCN, all future and customized part number for related… download now
2023_PCN-DD-025-2023-Rev0.pdf Product Group: DD/Fri Sep 29, 2023/PCN-DD-025-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Additional Wafer Fabrication Site for MT and MB Bridge Rectifiers For further information, please contact your regional Vishay office. Description of Change: To secure the supply chain for our customers, Vishay Diodes Division announces the qualification of an additional Wafer Fabrication site for MB and MT Bridge Rectifiers. Reason for Change: Capacity increase and supply chain security Expected Influence on Quality/Reliability/Performance: There will be no effect on product quality, reliability, or performance. Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Semiconductors Time Schedule: Start Shipment Date: Wed Mar 27, 2024 Sample… download now
2023_PCN-DD-024-2023-Rev0.pdf Product Group: DD/Thu Sep 28, 2023/PCN-DD-024-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Front-end Process Consolidation for 200V TMBS Commercial Grade Products For further information, please contact your regional Vishay office. Description of Change: Vishay Diodes Division is announcing the front-end process consolidation for 200V TMBS (Trench MOS Barrier Schottky) commercial grade products at Vishay wafer fab in Taiwan, as shown in annex 1 below. Meanwhile, 200V TMBS in SMF package will also follow the changes communicated in PCN-DD-019-2023 to introduce an additional in-house back- end manufacturing site in Kaohsiung, Taiwan. There will be no change in form, fit and function on all affected products. Upon the approval of this PCN, all future and customized part number for related product… download now
2023_PCN-DD-022-2023-Rev0.pdf Product Group: DD/Mon Aug 28, 2023/PCN-DD-022-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Additional Wafer Foundry for 100V and 120V TMBS For further information, please contact your regional Vishay office. Description of Change: In addition to the existing in-house TMBS (Trench MOS Barrier Schottky) wafer source, Vishay Diodes Division is introducing a new wafer source for 100V and 120V TMBS SMPC and 120V TMBS Power Pack products at existing wafer foundry in Tianjin, China. There will be no change in form, fit and function on all affected products. Upon the approval of this PCN, all future and customized part number for related product in the same package will adopt the same change. Reason for Change: Capacity expansion Expected Influence on Quality/Reliability/Performance: No changes in… download now
2023_PCN-DD-021-2023-Rev0.pdf Product Group: DD/Wed Aug 2, 2023/PCN-DD-021-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 New Manufacturing Location of GBL Bridge Rectifier For further information, please contact your regional Vishay office. Description of Change: Diodes Division is introducing a new manufacturing site of GBL Bridge Rectifier product at existing subcontractor in Sichuan China. This subcontractor is already manufacturing Vishay GBU and GSIB5S products for many years. Detail package comparison table of an old version vs. new version is as illustrated in annex 1. Upon the approval of this PCN, all future and customized part number for related product in the same package will adopt the same change. Reason for Change: Discontinuation of existing supplier Expected Influence on Quality/Reliability/Performance: No… download now
2023_PCN-DD-019-2023-Rev0.pdf Product Group: DD/Fri Jul 7, 2023/PCN-DD-019-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Additional In-House Backend Assembly Site for Commercial Rectifier Products in SMF Package For further information, please contact your regional Vishay office. Description of Change: Vishay Diodes Division is introducing an additional in-house back-end manufacturing site for Commercial Grade products in SMF package (Case Outline: DO-219AB). This assembly site is locating in Kaohsiung, Taiwan. In addition, the label size, plastic reels and packing method will be consolidated to the same as now implementing for surface mount packages in the new location, please refer to annex 1 for change view. There is no change in form, fit and function on all involved part numbers. Upon the approval of this PCN, all… download now
2023_PCN-DD-015-2023-Rev0.pdf Product Group: DD/Tue May 16, 2023/PCN-DD-015-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Additional Manufacturing Location for Axial 2A Schottky Products For further information, please contact your regional Vishay office. Description of Change: To balance various supply risks, Vishay Diodes Division is introducing an additional manufacturing site for Axial 2 Ampere Schottky products in Suzhou, China. This subcontractor is already an existing Vishay supplier of Axial packages (DO-204AL, DO-204AC and DO- 201AD). There is no change in form, fit and function of the finished goods. Upon the approval of this PCN, all future and customized part number for related product in the same package will adopt the same change. Classification of Change: Manufacturing backup and delivery consistency Expected… download now
2023_PCN-DD-014-2023-Rev0.pdf Product Group: DD/Mon May 8, 2023/PCN-DD-014-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Additional Wafer Fab Site Qualification For further information, please contact your regional Vishay office. Description of Change: To secure the supply chain for our customers, Vishay Semiconductor announces the qualification of an additional Wafer Fab for some DO-5 (DO-203AB) and DO-4 (DO-203AA) Part Numbers. Classification of Change: Capacity increase and supply chain security Expected Influence on Quality/Reliability/Performance: There will be no effect on product quality, reliability, or performance Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Semiconductors Time Schedule: Start Shipment Date: Tue Jul 18, 2023 Sample Availability:… download now
2023_PCN-DD-012-2023-Rev0.pdf Product Group: DD/Thu Apr 27, 2023/PCN-DD-012-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Industrial grade Zener, Schottky and ESD Protection Diodes assembly in SMF (DO-219AB) Package convert to Clip bonding For further information, please contact your regional Vishay office. Description of Change: The assembly technology of the affected part numbers will change from ”folded finger” to “soldered clip” (see Annex 1 for visual details). POD is being adopted (in line with JEDEC Standards) to align with other SMF (DO-219AB) products that are being produced on “soldered clip” SMF (DO-219AB) manufacturing lines, the EMC will convert to Industry standard Green Epoxy Molding Compound. Part numbers remain unchanged. Classification of Change: Product lines consolidation Expected Influence on… download now
2023_PCN-DD-011-2023-Rev0.pdf Product Group: DD/Thu Apr 27, 2023/PCN-DD-011-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Automotive Zener, Schottky and ESD Protection Diodes assembly in SMF (DO- 219AB) Package convert to Clip bonding For further information, please contact your regional Vishay office. Description of Change: The assembly technology of the affected partnumbers will change from ”folded finger” to “soldered clip” (see Annex 1 for visual details). POD is being adopted (in line with JEDEC Standards) to align with other SMF (DO-219AB) products that are being produced on “soldered clip” SMF (DO-219AB) manufacturing lines, the EMC will convert to Industry standard Green Epoxy Molding Compound. Part numbers are converting to the revision part numbers in accordance with Vishay Diodes standard nomenclature (see Annex… download now
2023_PCN-DD-010-2023-Rev0.pdf Product Group: DD/Fri Apr 28, 2023/PCN-DD-010-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Additional Manufacturing location for Axial GP10E Superectifier For further information, please contact your regional Vishay office. Description of Change: To complete manufacturing coverage of Superectifier products at the new Subcontractor in Anhui, China (already introduced through PCN-DD-002-2023), Vishay Diodes Division is announcing this additional manufacturing site also for axial GP10E products. Classification of Change: Manufacturing backup and delivery consistency Expected Influence on Quality/Reliability/Performance: No changes in quality and reliability performance Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay General… download now
2023_PCN-DD-009-2023-Rev0.pdf Product Group: DD/Fri Apr 28, 2023/PCN-DD-009-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Additional In-House Backend Assembly Site for Automotive Grade Rectifiers and TVS Products in SMP Package For further information, please contact your regional Vishay office. Description of Change: To support BCP (Business Continuity Program), Vishay Diodes Division is introducing an additional in-house back-end manufacturing site for Automotive Grade products in SMP package (Case Outline: DO-220AA). This assembly site is located in Kaohsiung, Taiwan, and already has manufacturing experience in Automotive Grade surface mount packaged products. There is no change in form, fit and function on all involved part numbers. Classification of Change: Capacity expansion and risk management Expected Influence on… download now
2023_PCN-DD-007-2023-Rev0.pdf Product Group: DD/Thu Apr 20, 2023/PCN-DD-007-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Additional Manufacturing location for Axial 2A Ultrafast Products For further information, please contact your regional Vishay office. Description of Change: To balance various supply risks, Vishay Diodes Division is introducing an additional manufacturing site for Axial 2 Ampere Ultrafast products in Suzhou, China. This subcontractor is already an existing Vishay supplier of Axial packages (DO-204AL, DO-204AC and DO- 201AD). There is no change in form, fit and function of the finished goods. Classification of Change: Manufacturing backup and delivery consistency Expected Influence on Quality/Reliability/Performance: No changes in quality and reliability performance Part Numbers/Series/Families Affected:… download now
2023_PCN-DD-005-2023-Rev0.pdf Product Group: DD/Thu Mar 30, 2023/PCN-DD-005-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 6 Inch conversion of Zener Diodes in SOT-23 and SOD-123 Packages For further information, please contact your regional Vishay office. Description of Change: The Silicon Wafer Diameter will change from 4 Inch (100mm) to 6 Inch (150mm) and the frontend manufacturing process will be adapted to 6 Inch lines which includes changes in chip design, diffusion and doping technology. With this PCN the affected partnumbers will also be converted to AuPdCu bonding wires (instead of currently used Au wires) with wafer front metal thickness being increased accordingly. Instead of pure Alloy 42 leadframe a copper plated Alloy 42 leadframe will be used. The Epoxy Molding Compound is being changed and POD (in line with… download now
2023_PCN-DD-003-2023-Rev0.pdf Product Group: DD/Fri Mar 24, 2023/PCN-DD-003-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Additional Schottky Wafer Foundry for Commercial Grade SMA, SMB and SMC Rectifiers For further information, please contact your regional Vishay office. Description of Change: In addition to the existing in-house Schottky wafer source, Vishay Diodes Division is introducing a subcontractor Schottky foundry in Tianjin, China for commercial grade SMA, SMB and SMC 20V~60V Schottky rectifiers. This additional Schottky wafer foundry was already introduced before through PCN-DD-006-2020 and PCN-DD-015-2022. There will be no change in form, fit and function on all involved products. Classification of Change: Capacity expansion Expected Influence on Quality/Reliability/Performance: No changes in quality and… download now
2023_PCN-DD-002-2023-Rev0.pdf Product Group: DD/Wed Feb 22, 2023/PCN-DD-002-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Additional Manufacturing Site for Axial Superectifier For further information, please contact your regional Vishay office. Description of Change: To balance various supply risks, Vishay Diodes Division is introducing an additional manufacturing site located in Anhui, China for Commercial Grade Superectifier products in Axial packages (Case Outline: DO-204AC, DO-204AL and DO-201AD). Classification of Change: Manufacturing backup and delivery consistency Expected Influence on Quality/Reliability/Performance: No change in quality and reliability performance Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay General Semiconductor Time Schedule:… download now
2023_PCN-DD-001-2023-Rev0.pdf Product Group: DD/Wed Jan 18, 2023/PCN-DD-001-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Additional In-House Backend Assembly Site for Commercial Rectifiers and TVS in SMP Package For further information, please contact your regional Vishay office. Description of Change: To support BCP (Business Continuity Program), Vishay Diodes Division is introducing an additional in-house back-end manufacturing site for Commercial Grade products in SMP package (Case Outline: DO-220AA). This assembly site is located in Kaohsiung, Taiwan, and already has manufacturing experience in surface mount packaged products. Meanwhile, 200V FRED Pt rectifier products in SMP package will also follow the changes communicated in PCN-DD-036-2022. There is no other change in form, fit and function on all involved part… download now
2023_PCN-DBR-00022-2023-Rev0.pdf Product Group: DBR/Thu Oct 19, 2023/PCN-DBR-00022-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Thickness change in Thick Film Chip Resistors, 0805 case size For further information, please contact your regional Vishay office. Description of Change: Thickness specification of 0805 case size thick film chip resistors components Tin-lead and Lead-free changes from 0.45 ± 0.05 mm to 0.5 ± 0.10 mm. Reason for Change: To standardize thickness dimension and align with compatible products in the market. Expected Influence on Quality/Reliability/Performance: None Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay BCcomponents Time Schedule: Start Shipment Date: Tue Apr 16, 2024 Sample Availability: Not applicable Product Identification: Not… download now
2023_PCN-DBR-00017-2023-Rev0.pdf Product Group: DBR/Wed Sep 6, 2023/PCN-DBR-00017-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Discontinuation of Resistance Value Marking for M25SI series, Fusible Thin Film Chip Resistors. For further information, please contact your regional Vishay office. Description of Change: Discontinuation of Resistance Value Marking for M25SI series, Fusible Thin Film Chip Resistors. before: R-value marking on top coat ; after: no R-value marking on top coat Reason for Change: Optimization of production process. Expected Influence on Quality/Reliability/Performance: Minor. Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Draloric Time Schedule: Start Shipment Date: Fri Dec 15, 2023 Sample Availability: samples available from mid Oct. 2023… download now
2023_PCN-DBR-00012-2023-Rev0.pdf Product Group: DBR/Tue Aug 29, 2023/PCN-DBR-00012-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Thick film Chip Resistors full backend capacity expansion For further information, please contact your regional Vishay office. Description of Change: Completion of the full backend process, from 1st breaking until final shipment, in Huizhou, China, as part of the chip resistors backend capacity expansion. There will be no change in product specification, product quality or part number. Reason for Change: To meet increasing demand of chip resistors, to increase flexibility and improve lead times, all backend process will be completely established in the new plant, in addition to the existing backend capacity. Expected Influence on Quality/Reliability/Performance: None Part Numbers/Series/Families… download now
2023_PCN-DBR-00003-2023-Rev0.pdf Product Group: DBR/Tue May 2, 2023/PCN-DBR-00003-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Thick Film Chip Resistor D/CRCW e3 0402, 0603 and 1206 capacity expansion For further information, please contact your regional Vishay office. Description of Change: Manufacturing capacity of Thick Film Chip Resistor, D/ CRCW e3, 0402, 0603 and 1206 case sizes with Lead free termination will be extended to Taiwan. There will be no change in product specification, product quality and part number. Classification of Change: Capacity increase and increasing supply flexibility. Expected Influence on Quality/Reliability/Performance: None Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay BCcomponents Time Schedule: Start Shipment Date: Sat Jul… download now
2023_PCN-CC-00005-2023-Rev0.pdf Product Group: CC/Fri Jun 23, 2023/PCN-CC-00005-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Additional Epoxy Supplier for BCc Line Safety Capacitor Series For further information, please contact your regional Vishay office. Description of Change: To secure the supply chain for our customer we introduce another source for the dry epoxy used as coating for the BCc line safety capacitor series AY1, AY2. This introduction will have no impact on the quality and reliability and is certified by the responsible certification bodies. Classification of Change: additional source Expected Influence on Quality/Reliability/Performance: No influence Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay BCcomponents Time Schedule: Start Shipment… download now
2023_PCN-CC-000003-2023-Rev0.pdf Product Group: CC/Thu Mar 2, 2023/PCN-CC-000003-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 660R series - Change of height dimension of some part numbers For further information, please contact your regional Vishay office. Description of Change: The height (H MAX.) of some items of the 660R series are adjusted. Classification of Change: Due to tight margin the H MAX. dimension is adjusted. Expected Influence on Quality/Reliability/Performance: Dimension change Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay Cera-Mite Time Schedule: Start Shipment Date: Mon Sep 4, 2023 Sample Availability: available Product Identification: part number Qualification Data: n/a This PCN is considered approved, without further notification, unless we… download now
2023_PCN-AC-00504-2023-Rev0.pdf Product Group: AC/Thu Jun 22, 2023/PCN-AC-00504-2023-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Change of production line of Vishay BCcomponents Series 013 RLC, 036 RSP and 116 RLL with case size 8.2x11mm For further information, please contact your regional Vishay office. Description of Change: Due to standardization reasons production of Vishay BCcomponents Series 013 RLC, 036 RSP, 116 RLL capacitors with case size 8.2x11mm is changed to alternative production line. Classification of Change: Standardization reasons in production process. Expected Influence on Quality/Reliability/Performance: No influence in quality and/or reliability. Part Numbers/Series/Families Affected: Please see materials list on the succeeding page. Vishay Brand(S): Vishay BCcomponents Time Schedule: Start Shipment Date:… download now
2023_PCN-20230210.pdf Weidmüller GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold T +49 (0) 52 31 14 28-0 F +49 (0) 52 31 14 28-1 16 weidmueller@weidmueller.de F +49 (0) 52 31 14 28-116 Seite 1 von 1 Detmold, 10.02.2023 Gabriele Huneke +49 (0) 52 31 14 28-235 Gabriele.Huneke@weidmueller.com T Kommanditgesellschaft Sitz: Detmold Registergericht Lemgo HRA 4183 USt-ID-Nr. DE124599901 WEEE-Reg.-Nr. DE73937473 Komplementärin: Weidmüller Führungs GmbH Sitz: Detmold Registergericht Lemgo HRB 5717 Geschäftsführer: Dr. Timo Berger Dr. Christian von Toll Bankverbindungen: Commerzbank AG IBAN: DE03 4808 0020 0283 2884 00 BIC: DRESDEFF480 Deutsche Bank IBAN: DE73 47670023 0437 4922 00 BIC: DEUTDE3B476 Postgiro Hannover IBAN: DE94 2501 0030 0088 9443 01 BIC: PBNKDEFFXXX Technische Modifikation Sehr geehrte Damen und Herren, ECOMAL Europe GmbH Einkauf Elektrotechnik Wilhelm-Schauenberg-Straße 7 79199 Kirchzarten Kd.-Nr. 0000043547 als innovatives Unternehmen streben wir ständig nach Verbesserungen und suchen nach… download now
2023_PCN-20230203.pdf W eidmüller GmbH & Co. KGKlingenbergstraße 26 D-32758 DetmoldT +49 (0) 52 31 14 28-0 F +49 (0) 52 31 14 28-1 16weidmueller@weidmueller.deF +49 (0) 52 31 14 28-116 Seite 1 von 1Detmold,03.02.2023Gabriele Huneke+49 (0) 52 31 14 28-235Gabriele.Huneke@weidmueller.comTKommanditgesellschaftSitz: DetmoldRegistergericht Lemgo HRA 4183USt-ID-Nr. DE124599901W EEE-Reg.-Nr. DE73937473Komplementärin: W eidmüller Führungs GmbH Sitz: DetmoldRegistergericht Lemgo HRB 5717Geschäftsführer: Dr. Timo BergerDr. Christian von TollBankverbindungen:Commerzbank AGIBAN: DE03 4808 0020 0283 2884 00BIC: DRESDEFF480Deutsche BankIBAN: DE73 47670023 0437 4922 00BIC: DEUTDE3B476Postgiro HannoverIBAN: DE94 2501 0030 0088 9443 01BIC: PBNKDEFFXXXProduktabkündigung mit AlternativeECOMAL Europe GmbHEinkauf ElektrotechnikWilhelm-Schauenberg-Straße 779199 KirchzartenKd.-Nr. 0000043547Sehr geehrte Damen und Herren,Weidmüller steht für leistungsfähige Verbindungen! In einem Prozess ständiger Weiterentwicklung bleibt es jedoch… download now
2023_PCN-20230130.pdf W eidmüller GmbH & Co. KGKlingenbergstraße 26 D-32758 DetmoldT +49 (0) 52 31 14 28-0 F +49 (0) 52 31 14 28-1 16weidmueller@weidmueller.deF +49 (0) 52 31 14 28-116 Seite 1 von 1Detmold,30.01.2023Gabriele Huneke+49 (0) 52 31 14 28-235Gabriele.Huneke@weidmueller.comTKommanditgesellschaftSitz: DetmoldRegistergericht Lemgo HRA 4183USt-ID-Nr. DE124599901W EEE-Reg.-Nr. DE73937473Komplementärin: W eidmüller Führungs GmbH Sitz: DetmoldRegistergericht Lemgo HRB 5717Geschäftsführer: Dr. Timo BergerDr. Christian von TollBankverbindungen:Commerzbank AGIBAN: DE03 4808 0020 0283 2884 00BIC: DRESDEFF480Deutsche BankIBAN: DE73 47670023 0437 4922 00BIC: DEUTDE3B476Postgiro HannoverIBAN: DE94 2501 0030 0088 9443 01BIC: PBNKDEFFXXXProduktabkündigung mit AlternativeECOMAL Europe GmbHEinkauf ElektrotechnikWilhelm-Schauenberg-Straße 779199 KirchzartenKd.-Nr. 0000043547Sehr geehrte Damen und Herren,Weidmüller steht für leistungsfähige Verbindungen! In einem Prozess ständiger Weiterentwicklung bleibt es jedoch… download now
2023_PCN-23-0089.pdf Process/Product Change Notification (PCN) General PCN Information PCN # 23 -0089 Revise Reflow temperature in datasheet PCN Date Jun 1, 2023 Initiator Steven Cao Date May 30, 2023 Post to PCN Alert? Yes No E-mail PCNresponse@ qorvo. com Type of Change: Major Minor Obsolescence Change Affects Form Fit Function Reliability N/A Other: update datasheet according to actual practice. Description of Change: Total 12 devices were affected. Their datasheets define reflow soldering temperature is 260 deg C. All of them should be changed to 245 deg C. Reason for Change: About reflow soldering temperature in datasheet, it does not match product's actual requirement. Detail of potential impact to customer: Customer should follow 245 deg C reflow soldering tem perature not 260 deg C. Affected Products: UF3C065030B3, UF3C065040B3, UF3C065040B3A, UF3C065080B3, UF3C065080B7S, UF3C120080B7S, UF3C120150B7S, UF3SC065030B7S, UF3SC065040B7S, UF3SC120040B7S, UJ3C065030B3, UJ3C065080B3: Total 12 d evices were… download now
2023_PCN-8TEQJ-0471.pdf 1/6 To : ＿＿＿＿＿＿＿＿＿＿＿＿ January 16, 2023 Document Number: 8TEQJ-0471 Sato Manabu Product Engineering Department Manager E&MC Business Division NIDEC COPAL ELECTRONICS CORPORATION Product Discontinuation Notice for Operating Swiches 1. Affected Parts Please refer to the product list in the separate document. 2. Schedule Last Time Buy： December 20 , 2023 Expected Last Ship Date： March 29 , 2024 ※The last shipping date may be extended depending on the state of production. For questions or concerns regarding this notification, please contact our sales office. Approval Signature Form 【Date】 【Company name】 【Department】 【Person in charge】 【Signature】 2/6 8TEQJ-0470 LIST OF PART NUMBERS No. NAME PART NUMBER No. NAME PART NUMBER No. NAME PART NUMBER 1Toggle 8A 1013-Z 61 Toggle 8D 1012-Z 121 Lever ・Rocker 8HD 1021-Z 2Toggle 8A 1021C-Z 62 Toggle 8D 1021-Z 122 Lever ・Rocker 8HD 1051-Z 3Toggle 8A 1041-Z 63 Toggle 8D 1041-Z 123 Lever ・Rocker 8HD 1061-Z 4Toggle 8A 1042C-Z 64 Toggle 8D 1051-Z 124 Lever… download now
2023_PCN-062_2022_1-OMTB2217102.pdf PCN-062_2022_1 -OM TB2217102 Page 1/4 Product Change Notification Beijing, 09 th February 2023 PCN-0 62_20 22_1-OMT B2217102 Some data corrections in datasheets Some CASR- NP and CKSR-NP models Update with dates of data sheets modifications (s ee on page 4) Based on the JEDEC Standard JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on some CASR- NP and CKSR -NP models . Concerned products : CASR 15 -NP/SP3; CKSR 15 -NP; CKSR 25 -NP; CKSR 50 -NP; CKSR 50 -NP/SP1; CKSR 6 -NP; Chan ge: Description of the technical change : Some data corrections in datasheets for "Peak-peak output ripple at f = 450 kHz" and for "Uc" value in UL 508 Ratings and assumptions of certification section. PCN-062_2022_1 -OM TB2217102 Page 2/4 For CASR 15 -NP/SP3: Before: After:… download now
2023_PCN-061_2021_1-OMTB2104101.pdf PCN-061_2021_1 -OMT B210 4101 Page 1/2 Product Change Notification Beijing, 05 th July 2023 PCN-0 61_20 21_1-OMT B2104101 Second source high precision Resistors CAS -NP; CASR-NP; CKSR- NP series CHANGE CANCELLED Based on the JEDEC Standard JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on CAS-NP, CASR -NP and CKSR- NP series . Concerned products : CAS 15 -NP; CAS 15 -NP/SP1; CAS 25 -NP; CAS 25 -NP/SP1; CAS 50 -NP; CAS 6 -NP; CASR 15 -NP; CASR 15 -NP/SP1; CASR 15 -NP/SP3; CASR 15- NP/SP6; CASR 25 -NP; CASR 25 -NP/SP1; CASR 25 -NP/SP3; CASR 25 -NP/SP6; CASR 50 -NP; CASR 50 -NP/SP1; CASR 50 -NP/SP3; CASR 50 -NP/SP6; CASR 6 -NP; CASR 6 -NP/SP1; CASR 6-NP/SP3; CASR 6 -NP/SP5; CASR 6 -NP/SP6; CKSR 15 -NP; CKSR 25 -NP; CKSR 25 -NP/SP3; CKSR 50-NP; CKSR 50… download now
2023_PCN-025_2019_1-OMTB1815601.pdf PCN-025_2019_ 1-OM TB 1815601 Page 1/3 Product Change Notification Beijing, 09 th May 202 3 PCN-0 25_20 19_1-OMT B1815601 Replacing Red Phosphorus plastic material CAS -NP, CASR-NP and CKSR-NP series Date codes (see in red on page 3) Based on the JEDEC Standard JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on CAS-NP, CASR -NP and CKSR- NP series . Concerned products : CAS 15 -NP; CAS 15 -NP/SP1; CAS 25 -NP; CAS 25 -NP/SP1; CAS 50 -NP; CAS 6 -NP; CASR 15 -NP; CASR 15 -NP/SP1; CASR 15 -NP/SP3; CASR 15 -NP/SP6; CASR 25 -NP; CASR 25 -NP/SP1; CASR 25 -NP/SP3; CASR 25 -NP/SP6; CASR 50 -NP; CASR 50 -NP/SP1; CASR 50 -NP/SP3; CASR 50 -NP/S P6; CASR 6 -NP; CASR 6 -NP/SP3; CASR 6 -NP/SP5; CASR 6 -NP/SP6; CKSR 15 -NP; CKSR 25 -NP; CKSR 25 -NP/SP3; CKSR 50 -NP;… download now
2023_LEM_PCN-094_2022_1.pdf PCN-094_2022_1 -OM TS2223801+S2223802+S2223803+S2223804+S2223805 Page 1/4 Product Change Notification Geneva, 13 th September 202 3 PCN-0 94_20 22_1-OMT S2223801+S2223802+S2223803 +S2223804+S2223805 Varnish change on final Magnetic circuit 0165#; HAFS; HAIS; HASS; HTFS series Update with first date codes Based on the JEDEC Standard JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on 0165#; HAFS; HAIS; HASS; HTFS series . Concerned products : All 0165# models All HAFS models All HAIS models All HASS models All HTFS models we confirm you that LEM is now producing the models listed here above according to the change explained on page 3 and from the date codes listed on page 2 . Explanation on the date code (example with date code 822297) : “8 ” means the… download now
2023_IN-105_2022_1-OMTB2220306.pdf IN-10 5_202 2_1-OMT B222030 6 Page 1/3 Information Note Beijing, 27 th Februar y 202 3 IN -10 5_202 2_1-OMT B2220306 CE marking removal L A55 and LA100P series – First date code Based on the JEDEC Standard JESD46 standard (latest rel ease) Not for publication unless permission is granted by LEM Dear valued customer, To answer to continuous market requirement for impr oved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on L A55 and LA100P series . Concerned product s: LA 25 -P; LA 55 -P; LA 55 -P/SP1; LA 55 -P/SP11; LA 55 -P/SP2; LA 55 -P/SP21; LA 55 -P/SP23; LA 55 -P/SP26; LA 55 -P/SP50; LA 55-P/SP52; LA 55 -P/SP7; LA 55 -TP; LA 55 -TP/SP1; LA 55 -TP/SP27; LA 55 -TP/SP28; LA 55 -TP/SP9; LA 100 -P; LA 100 -P/SP13; LA 100 -P/SP4; LA 100 -P/SP50; LA 100-P/SP6; LA 100 -P/SP8; LA 100 -P/SP9; LA 100 -TP; LA 100 -TP/SP10; LA 100-TP/SP2; LA 100-TP/SP7; IN-10 5_202 2_1-OMT B222030 6 Page 2/3 we confirm you that LEM is… download now
2023_IN-103_2022_1-OMTB2220303.pdf IN-103_2022 _1-OMT B2220303 Page 1/2 Information Note Beijing, 12 th April 2023 IN-103 _2022 _1-OMT B2220303 CE marking removal LA25NP and LA35NP series – D ate codes Based on the JEDEC Standard JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear valued customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on LA25NP and LA35NP series. Concerned products: LA 25- NP; LA 25 -NP/SP11; LA 25 -NP/SP13; LA 25- NP/SP14; LA 25- NP/SP22; LA 25- NP/SP25; LA 25- NP/SP32; LA 25- NP/SP34; LA 25- NP/SP38; LA 25- NP/SP39; LA 25- NP/SP43; LA 25- NP/SP7; LA 25- NP/SP8; LA 25-NP/SP9; LA 35- NP; LA 35 -NP/SP3; we confirm you that LEM is now producing the models listed here above according to the change explained on the next page and from the following date codes: • On product: from date code 723053 • On package stick: from date… download now
2023_IN-087_2022_1-OMTB2220302.pdf IN-087 _202 2_1-OMT B2220302 Page 1/3 Information Note Beijing, 02 nd March 2023 IN -087 _202 2_1-OMT B2220302 CE marking removal CAS -NP , CASR -NP and CKSR -NP series Date code Based on the JEDEC Standard JESD46 standard (latest rel ease) Not for publication unless permission is granted by LEM Dear valued customer, To answer to continuous market requirement for impr oved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modifications on CAS -NP , CASR -NP and CKSR -NP series . Concerned product s: CAS 15 -NP ; CAS 15 -NP/SP1 ; CAS 25 -NP ; CAS 25 -NP/SP1 ; CAS 50 -NP ; CAS 6 -NP ; CASR 15 -NP ; ; CASR 15 -NP/SP1 ; CASR 15 -NP/SP3 ; CASR 15 -NP/SP6 ; CASR 25 -NP ; CASR 25 -NP/SP1 ; CASR 25 -NP/SP3 ; CASR 25-NP/SP6 ; CASR 50 -NP ; CASR 50 -NP/SP1 ; CASR 50 -NP/SP3 ; CASR 50 -NP/SP6 ; CASR 6 -NP; CASR 6 -NP/SP1; CASR 6 -NP/SP3; CASR 6 -NP/SP5; CASR 6 -NP/SP6; CKSR 15 -NP ; CKSR 25 -NP ; CKSR 25 -NP/SP3 ; CKSR 50 -NP ; CKSR 50… download now
2023_IN-080_2022_1-OMTS2220308.pdf IN-0 80_2022 _1-OMT S2220308 Page 1/2 Information Note Sofia , 10 th July 2023 IN -080 _2022 _1-OMT S22203 08 CE marking removal HTFS series – Update with date code Based on the JEDEC Standard JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear valued customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modifications on HTFS series . Concerned products : HTFS 200 -P; HTFS 200 -P/SP2; HTFS 400 -P; HTFS 400 -P/SP2; HTFS 400 -P/SP5; HTFS 400 -P/SP6; HTFS 400 -P/SP7; HTFS 600 -P; HTFS 800 -P; HTFS 800 -P/SP2; HTFS 800 -P/SP3; HTFS 800 -P/SP5; HTFS 800 -P/SP6; we confirm you that LEM is now producing the HTFS series listed here above according to the change explained on the next page and from the date code 8 23166. Explanation on the date code: “8 ” means the production center, here LEM in Sofia (Bulgaria) “23” means the… download now
2023_G23-03050_E-Rev0.pdf download now
2023_EDLC-Dimensions-Modification-Notice-022223.pdf Lelon Electronics Corp. 14 7, Sec. 1, Guoguang Rd., Dali District, Taichung, Taiwan Tel: +886 -4-2418 -1856 Fax: +886 -4-2418 -1906 E-mail: service@lelon.com www.lelon.com ED LC Dimension Modification Notice Doc. No: TR -PCN 2301 Date: 20 23/02/22 Revision: 1.0 Page: 1 Grade: General Dear Respected Direct Customers & Distributors, W -widely WE pay our hearty THX for your supports onto the EDLC’s Biz. caused we had 7 years on the field been… Now is time for up -grading our EDLC’s Product Reliability as Necessity. Therefore ., we had Re -tooling the Casing for Higher Capacitance value (1 -1.5F) w/ 0.5mm in thickness . This Major Change is only focusing on Mechanical Dimensions as shown on below: 1.None any Electrical parameter or Property changed on Electrical Performance 2. for the Big Case Ones., i.e for EDLC’s Capacitance of 1-1.5F ones . - The Outside Casing w/ 0.5mm more in Thicke r. For having more Electrolytes to ensure EDLC’s Life Cycle. - Therefore, caused Total Height of EDLC’s… download now
2023_ECN_ECR20230415001.pdf download now
2023_CSRA_Rev.A8_230606.pdf Data Sheet Customer : Product: Automotive Grade Metal Film Precision MELF Resistor - CSR A Series Size : 0102/0204/0207 Issued Date: 06-Jun -23 Edition: REV.A 8 VIKING TECH CORPORATION 光頡科技股份有限公司 VIKING TECH CORPORATION KAOHSIUNG BRANCH 光頡科技股份有限公司高雄分公司 VIKING ELECTRONICS (WUXI) CO., LTD. 光頡電子 (無錫 )有限公司 No.70 Guangfu N. Rd., Hukou Township, Hsinchu County 303, Taiwan TEL:886 -3-5972931 FAX:886 -3-5972935 •886 -3-5973494 E-mail:sales@viking.com.tw No.248 -3, Sin -Sheng Rd., Cian -Jhen Dist., Kaohsiung, 806, Taiwan TEL:886 -7-8217999 FAX:886 -7-8228229 E-mail:sales@viking.com.tw No. 22 Xixia Road, Machinery & Industry Park, National Hi -Tech Industri al Development Zone of Wuxi, Wuxi, Jiangsu Province, China Zip Code:214028 TEL:86 -510 -85203339 FAX:86 -510 -85203667 •86-510 -85203977 E-mail:china@viking.com.tw Produced by (QC) Checked (QC) Approved by (QC) Prepared by (Sales) Accepted by (Customer) 06-Jun -23 06-Jun -23 06-Jun -23 Alice Hsiao Susan Huang Susan Huang 【 CSR A Series 】… download now
2023_ARF_Rev_A2_230607.pdf download now
2023_Actuator-Production-site-transfer-notification-20230918pdf.pdf September 2023 Notification of the transfer of production site Dear customer, thank you for your continued cooperation and support. We are currently carrying out structural reforms due to the changes of the market environment, and as part of this, we will be transferring the production location of certain series from Japan (Ichinoseki City, Iwate Prefecture) to Vietnam. Products will receive new production equipment in Vietnam except for CJ25 series, where production equipment will be transferred from Japan to Vietnam. Product quality and delivery time will not be affected by the switch of production site. Details Applicable products (Please refer to separate sheet for details) Phase1: RE12A series, REC16K/L/M series, CJ25 series Phase2: M13 series, JC10 series, CRV16 series Phase3: MC1003 series, M22E/S/L series, REC(W)/S20 series *Products subject to Phase2 and Phase3 may be changed. Production site [Current production location] Japan (Ichinoseki City, Iwate Prefecture)… download now
2023_204-New-epoxy-robot-machine.pdf Honeywell Product/Process ChangeNotification (PCN) PCN ID#:204 Title: Additional epoxyrobotstation atlarge basics switches Change: Permanent Honeywell Contact Name: Carrasco, MiguelEduardo E- mail: MiguelEduardo.Carrasco@Honeywell.com Title: Quality Engineer I Product Information Affected partsandrevisions: BZ- 2R5551- A2,BZ-2RW8055513- A2,BZ-2RW822551529T- S,BZ- 2RW8225551- A2,BZ-2RW8225551- A2,BZ- 2RW8225551- A2,BZ-2RW82255- A2-S,BZ- 2RW82255- A2-S,BZ- 2RW8255- A2-S,BZ- 2RW8255- A2-S,BZ- 3RW8557105PC2- S,BZ3RW899550520PC2S, BZ3RW8995518PC2S=C, BZ3RW899555110PC2=, BZ3RW899555110PC2=, BZ7RW82550511PC2S=,SCN-1632SC, SCN-1632SC, SCN-1633SC, SCN-1634SC, SCN- 1634SC, SCN-2209SC, WZ-2RW8225522T- S,YZ- 2RW805551T, YZ-3RDS153- S, Does thepart number change? False Type ofChange: Processing/ Manufacturing Change Description: The epoxy robotstation forthe large basics products hasadded asecond robotsothe capacity canbe increased atthe production ofthese products. Theprocess willremain thesame,… download now
2023_8UCBF-0035-3_8UCED-0127-3_8UCGZ-0015-REC-W-RES-W-20D.pdf 1/3 Submission/Distribution Performance evaluation report Control number 8U CBF -00 35 -3 Issue date Issue Section Title Approve Check Check ２７ -Apr -２０２３ Second Manufacturing Department QC Model: REC(W)/RES(W) 20D series Rotor press -fit part reinforcement adhesive and shaft shape change evaluation Document classification Record １. Purpose Reinforcement adhesive for rotor press -fitting part of encoder REC(W)/RES(W) 20D series and shaft shape change productReport the evaluation results. ２. Trial Model /Change details Item Contens Series model REC(W)/RES(W) 20D series Purpose Reinforcement adhesive for rotor press -fit part and shaft shape change Change contents ▽Change detail ※ For images of the Before change and the After change , see P. 2 reference Trial model Evaluated with RECW20D -50 -201 -1 shaft/rotor/body assembly assembly Remark Details such as model selection, prototyping method, evaluation method, etc. are decided at the internal meeting (QC meeting). ３.Conclusion ■Judge… download now
2022_PTN-TC-004-2022-Rev0.pdf Product Group: TC/Wed Jun 29, 2022/PTN-TC-004-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Terminate manufacturing of T58A0107M6R3C0100 and T58A0107M6R3C0150 DESCRIPTION OF CHANGE: Vishay will discontinue production of T58A0107M6R3C0100 and T58A0107M6R3C0150 REASON FOR CHANGE: Manufacturing of T58A0107M6R3C0100 and T58A0107M6R3C0150 no longer cost effective. T58A0107M6R3C0200 part number will be established for replacement. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: No PART NUMBERS/SERIES/FAMILIES AFFECTED: T58A0107M6R3C0100, T58A0107M6R3C0150, VISHAY BRAND(s): Vishay TIME SCHEDULE: Last Time Buy Date: Tue Jan 3, 2023 Last Time Ship Date: Mon Jul 3, 2023 SAMPLE AVAILABILITY: Upon Request PRODUCT IDENTIFICATION: N/A QUALIFICATION DATA: N/A This PCN is considered… download now
2022_PTN-TC-003-2021-Rev0.pdf Product Group: TC/Wed Jun 8, 2022/PTN-TC-003-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Terminate Manufacturing of P/N 298D105X_025M_T DESCRIPTION OF CHANGE: Vishay will discontinue production of P/Ns 298D105XX025M2T and 298D105XX025M4T REASON FOR CHANGE: Based on low market demand, manufacturing of these products is no longer cost Effective. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: Not applicable PART NUMBERS/SERIES/FAMILIES AFFECTED: 298D105X0025M2T, 298D105X0025M4T, 298D105X9025M2T, 298D105X9025M4T, VISHAY BRAND(s): Vishay Sprague TIME SCHEDULE: Last Time Buy Date: Wed Mar 8, 2023 Last Time Ship Date: Thu Jun 8, 2023 SAMPLE AVAILABILITY: Not applicable PRODUCT IDENTIFICATION: Not applicable QUALIFICATION DATA: Not applicable This PCN is considered approved,… download now
2022_PTN-SF-312-2022-Rev0.pdf Product Group: SF/Wed Oct 5, 2022/PTN-SF-312-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Sfernice Discontinuation of custom Current Sensing Wirebondable Thin Film Chip Resistors DESCRIPTION OF CHANGE: In conformance with our Product Life management procedure, and due to lack of demand, Sfernice Division is transferring custom current sensing wirebondable Thin Film chip resistors to an End of Product Life status. REASON FOR CHANGE: Custom products derived from obsolete SA, SB, SC Series. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: not applicable. PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Sfernice TIME SCHEDULE: Last Time Buy Date: Wed Oct 5, 2022 Last Time Ship Date: Wed Oct 5, 2022 SAMPLE… download now
2022_PTN-SF-304-2022-Rev0.pdf Product Group: SF/Fri Jul 1, 2022/PTN-SF-304-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Discontinuation of Molded Inductors TR021, TR022, TR023, TR025, TR026 & Current Chokes IG70, IG120 DESCRIPTION OF CHANGE: Obsolescence. In conformance with our Product Life management procedure, and due to lack of demand, Sfernice Division is transferring Molded Inductors TR021, TR022, TR023, TR025, TR026 & Current Chokes IG70, IG120 to an End of Product Life status. Potential alternatives are offered by Vishay Dale with IHD-1, IHD-2, IHD-3, IHD-4 or IRF-46, IRF-36 series. REASON FOR CHANGE: High decreasing demand for more than 5 years or No demand for more than 5 years EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: none PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials… download now
2022_PTN-SF-303-2022-Rev0.pdf Product Group: SF/Wed Jul 6, 2022/PTN-SF-303-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Discontinuation of 9 mm Multi-Ganged Potentiometer P9A DESCRIPTION OF CHANGE: Obsolescence. In conformance with our Product Life management procedure, and due to lack of demand, Sfernice Division is transferring 9 mm Multi-Ganged Potentiometer P9A to an End of Product Life status. Potential alternatives are offered by Vishay Sfernice with P11S/P11A serie : www.vishay.com/docs/51031/p11sp11a.pdf REASON FOR CHANGE: High decreasing demand for more than 5 years or No demand for more than 5 years EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: none PART NUMBERS/SERIES/FAMILIES AFFECTED: P9A* VISHAY BRAND(s): Vishay Sfernice TIME SCHEDULE: Last Time Buy Date: Wed Jan 4, 2023 Last Time… download now
2022_PTN-SF-286-2022-Rev0.pdf Product Group: SF/Mon Jan 10, 2022/PTN-SF-286-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Obsolescence. Molded and Insulated Wirewound Power Resistors Axial Leads. BSI series, size 58 / 68 / 516 / 523 / 923 / 932 / 947 DESCRIPTION OF CHANGE: In conformance with our Product Life management procedure and due to a decreasing demand, Sfernice Division is transferring the BSI series, size 58 / 68 / 516 / 523 / 923 / 932 / 947 to an End Of Life status. RLP series From Sfernice Division is a good alternative solution REASON FOR CHANGE: Equipment obsolescence and decreasing demand EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: Not Applicable PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Sfernice TIME SCHEDULE:… download now
2022_PTN-OPT-1250-2022-Rev0.pdf Product Group: OPT/Mon Nov 21, 2022/PTN-OPT-1250-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Obsolescence of the K301x and K302x series TRIAC optocoupler products DESCRIPTION OF CHANGE: K301x and K302x series TRIAC optocoupler discontinuation. Alternative is the VO302x series. REASON FOR CHANGE: Chip obsolescence EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: Product Obsolescence PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Semiconductors TIME SCHEDULE: Last Time Buy Date: Fri Jun 30, 2023 Last Time Ship Date: Sun Dec 31, 2023 SAMPLE AVAILABILITY: Final orders can only be accepted on or before the last order date and are subject to the availability. Early ordering is strongly recommended. PRODUCT… download now
2022_PTN-OPT-1245-2022-Rev0.pdf Product Group: OPT/Wed Oct 19, 2022/PTN-OPT-1245-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT End of Life of existing Learning, Repeater and Data Transmission Parts DESCRIPTION OF CHANGE: The products reached the end of the product life cycle. We recommended to test the replacement parts in your application. Details can be found in the Fast Fact. REASON FOR CHANGE: The existing external IC Supplier has announced to end production. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: None. PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Semiconductors TIME SCHEDULE: Last Time Buy Date: Sun Apr 30, 2023 Last Time Ship Date: Tue Oct 31, 2023 SAMPLE AVAILABILITY: Replacement samples are available PRODUCT… download now
2022_PTN-NLR-008-2022-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355- 2143 U.S.A. Phone (610) 644- 1300 Fax (610) 296- 0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT MKT010- 06 Withdrawal of NTHS0805N04N2203JE DESCRIPTION OF CHANGE: Vishay is withdrawing the NTC component with Siemens SAPID: 1090421, Vishay Pn: NTHS0805N04N2203JE . CLASSIFICATION OF CHANGE: Product Obsolescence REASON FOR CHANGE: Lack of Market demand resulting low productivity EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: N /A PRODUCT CATEGORY: Resistors, Non -Linear , Thermistors PART NU MBERS/SERIES/FAMILIES AFFECTED: NTHS0805N04N2203JE VISHAY BRAND(s): Vishay Dale TIME SCHEDULE: Start Shipment Date: N /A Last Time Buy Date: 31/03/2023 Last Time Shipment Date: 31/07/2023 SAMPLE AVAILABILITY: N /A PRODUCT IDENTIFICATION: N /A QUALIFICATION DATA: N/A This P TN is considered approved, without further notification. ISSUED BY:… download now
2022_PTN-NLR-0010-2022-REV-0.pdf Product Group: NLR/Tue Nov 15, 2022/PTN-NLR-0010-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Withdrawal of TFPT Tin/Lead termination DESCRIPTION OF CHANGE: Vishay has the intention to withdraw all TFPT parts with tin/lead terminations. The alternative Pb-free terminations are available REASON FOR CHANGE: Lack of market demand EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N/A PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay TIME SCHEDULE: Last Time Buy Date: Wed Mar 1, 2023 Last Time Ship Date: Thu Jun 1, 2023 SAMPLE AVAILABILITY: N/A PRODUCT IDENTIFICATION: N/A QUALIFICATION DATA: N/A This PCN is considered approved, without further notification, unless we receive specific customer concerns before Wed Feb… download now
2022_PTN-MLC-0003-2022-Rev0.pdf Product Group: MLC/Wed May 25, 2022/PTN-MLC-0003-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Non ELV& Non RoHS X8R Dielectric Pb Content Products Termination DESCRIPTION OF CHANGE: Termination of non RoHS& non ELV (European End of Life Vehicles Directive) High Temperature Applications up to 150 °C MLCCs built from dielectric type X8R. REASON FOR CHANGE: Upon RoHS& ELV directives and in accordance with Vishay production unification plan, the PTN is being issued to terminate X8R dielectric Pb content parts and propose Pb free replacement parts. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: Not applicable PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Vitramon TIME SCHEDULE: Last Time Buy Date: Thu Jun 1,… download now
2022_PTN-MLC-00004-2022-Rev0.pdf Product Group: MLC/Tue Jul 5, 2022/PTN-MLC-00004-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT End of Life Notice for MLCC Y5V Dielectric products from VJ…W1BC series DESCRIPTION OF CHANGE: Termination of MLCCs from VJ…W1BC series with Y5V dielectric code “V” REASON FOR CHANGE: Stop of raw material supply EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: Not applicable PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay TIME SCHEDULE: Last Time Buy Date: Sun Jan 1, 2023 Last Time Ship Date: Fri Jun 30, 2023 SAMPLE AVAILABILITY: Not applicable PRODUCT IDENTIFICATION: VJ....V...W1BC, see detailed PN list in PTN QUALIFICATION DATA: Not applicable This PTN is considered approved, without further notification, unless… download now
2022_PTN-LFPTN2022-001.pdf Product Termination Notice (PTN) Littelfuse, Inc. 8755 West Higgins Road, Suite 500 Chicago, IL 60631 USA (773) 628 -1000 1 January 25 , 202 2 LFP TN 202 2-001 Discrete IGBT IXBF9N160G to be obsolete To whom it may concern, In our constant efforts to improve our service to our valued customers and make our supply chain more agile and lean, we are obsoleting the list of part numbers shown below . These products are currently not highly demanded as they are being substituted by our newest Discrete IGBT product family. We encourage you to visit our website to find a suitable substitute for your system, if needed. Last time Buy : February 28 th, 202 2 Effective date : Sept 1st, 202 2 Material to be OB: OB Effective Date Last Book Date for New Orders IXBF9N160G 1-Sep -20 22 28 -Feb -20 22 This communication letter is for your information and acknowledgement. If you have any other questions or concerns, please contact your local Littelfuse sales representative or product team below for… download now
2022_PTN-FC-001-2022-Rev0.pdf Product Group: FC/Thu Jan 6, 2022/PTN-FC-001-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT End Of Life of Series MKT303, MKT365, KP/MMKP376, MKP379, MKP380 DESCRIPTION OF CHANGE: With this PTN, Vishay informs selected legacy General Purpose and AC&Pulse Film Capacitors termination, with the purpose of streamlining the film capacitor portfolio. Alternatives are available: EOL MKT303 - Alternative: MKT372 or MKT373 | EOL MKT365 - Alternative: MKT366 or MKT367 EOL KP/MMKP376 - Alternative: KP1836 | EOL MKP379 - Alternative: MKP385 | EOL MKP380 - Alternative: MKP385 REASON FOR CHANGE: Streamline Portfolio EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N/A PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay… download now
2022_PTN-DR-00011-2022-Rev0.pdf Product Group: DR/Tue May 10, 2022/PTN-DR-00011-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT End of Life (EOL) Notification for all Display Products / Modules; including all associated goods and services. DESCRIPTION OF CHANGE: End of Life notification terminating production for all LCD (Liquid Crystal Displays), Color / Monochrome TFT (Thin Film Transistor), and OLED (Organic Light Emitting Diodes) products to include modules, and displays along with all associated products / services / options connected with these assemblies. REASON FOR CHANGE: EOL for all Vishay Dale display products. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N/A PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Dale TIME SCHEDULE:… download now
2022_PTN-DI-00546-2022-Rev0.pdf Product Group: DI/Fri Mar 4, 2022/PTN-DI-00546-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Product Obsolescence on ET package code IHLP part numbers DESCRIPTION OF CHANGE: Vishay is obsoleting the ET package code IHLP part numbers. The standard IHLP part numbers with ER package code are available and should be used going forward. REASON FOR CHANGE: These part numbers were provided to offer a shorter lead time than our standard series IHLP parts. This issue is no longer present and the standard IHLP part numbers now have the shortest leadtime in the industry. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N/A PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Dale TIME SCHEDULE: Last Time Buy Date: Fri Jun 3,… download now
2022_PTN-DD-024-2022-Rev0.pdf Product Group: DD/Tue Aug 23, 2022/PTN-DD-024-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Product Discontinuation Notice of TVS and Rectifier Products DESCRIPTION OF CHANGE: Vishay Diodes Division will discontinue TVS in Axial packages with the lead forming or bulk packaging, and other rectifiers products with low volume sales. REASON FOR CHANGE: Low sales EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N/A PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay General Semiconductor TIME SCHEDULE: Last Time Buy Date: Sat Feb 25, 2023 Last Time Ship Date: Fri Aug 25, 2023 SAMPLE AVAILABILITY: N/A PRODUCT IDENTIFICATION: N/A QUALIFICATION DATA: N/A This PCN is considered approved, without further notification,… download now
2022_PTN-DD-019-2022-Rev0.pdf Product Group: DD/Tue Jul 12, 2022/PTN-DD-019-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Product Obsolescence DESCRIPTION OF CHANGE: Due to End Of Life of some IGBT chips, Vishay Semiconductors has to discontinue some power module part numbers. Vishay is ready to propose alternate solutions for below obsolete Part Numbers (see annex 1). Customers are invited to contact Vishay to check the availability of alternates of the items of your interest. REASON FOR CHANGE: Discontinued supply of IGBT die EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N/A PART NUMBERS/SERIES/FAMILIES AFFECTED: VS-GP100TS60SFPBF, VS-GP300TD60S, VS-GP400TD60S, VS-GP250SA60S, VISHAY BRAND(s): Vishay Semiconductors TIME SCHEDULE: Last Time Buy Date: Mon Jan 16, 2023 Last Time Ship Date: Mon Jul 17,… download now
2022_PTN-DD-017-2022-Rev0.pdf Product Group: DD/Thu Jul 7, 2022/PTN-DD-017-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Product Obsolescence DESCRIPTION OF CHANGE: Vishay Semiconductors announces the discontinuation of some DO-9 (DO-205AB) part numbers. Vishay cannot support quantities for last-time-buys orders due to unforeseen supply constraints. REASON FOR CHANGE: Discontinued supply of ceramic housing due to force majeure. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N/A PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Semiconductors TIME SCHEDULE: Last Time Buy Date: Wed Jul 13, 2022 Last Time Ship Date: Sat Dec 31, 2022 SAMPLE AVAILABILITY: N/A PRODUCT IDENTIFICATION: N/A QUALIFICATION DATA: N/A This PCN is considered approved,… download now
2022_PTN-DBR-00013-2022-Rev0.pdf Product Group: DBR/Fri Oct 28, 2022/PTN-DBR-00013-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Discontinuation of selected product range for industrial thin film chip series MCx professional. DESCRIPTION OF CHANGE: Discontinuation of MCA 1206 TC50 / 1% and TC50 / 0,5% > 480K MCU 0805 TC50 / 1% and TC50 / 0,5% > 2M00 MCT 0603 TC50 / 1% and TC50 / 0,5% > 2M00 MCS 0402 TC50 / 1% and TC50 / 0,5% > 1M00 with partial technical replacement, see appendix B. Some of the affected products can be replaced by either MELF or automotive chip. Some selective items will not be able to have replacement in VISHAY DBR thin film technology. REASON FOR CHANGE: Unviable and non-profitable manufacturing. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: n.a. PART NUMBERS/SERIES/FAMILIES… download now
2022_PTN-DBR-00010-2022-Rev0.pdf Product Group: DBR/Tue Jun 21, 2022/PTN-DBR-00010-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Discontinuation of Trimmable Thick Film Chip resistors D/CRCW-TR and D/CRCW-TR e3 series DESCRIPTION OF CHANGE: Discontinuation of the Trimmable Thick Film Rectangular Chip Resistors, D/CRCW-TR Tin-Lead and D/CRCW-TR e3 Lead-Free series REASON FOR CHANGE: Lack of market demand EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: Not applicable PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay BCcomponents TIME SCHEDULE: Last Time Buy Date: Wed Dec 21, 2022 Last Time Ship Date: Tue Jun 20, 2023 SAMPLE AVAILABILITY: Not applicable PRODUCT IDENTIFICATION: Not applicable QUALIFICATION DATA: Not applicable This PCN is… download now
2022_PTN-DBR-00006-2022-Rev1.pdf Product Group: DBR/Tue May 10, 2022/PTN-DBR-00006-2022-REV-1 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Discontinuation of Semi-Precision Thick Film Chip Resistors D/CRCW -P and D/CRCW-P e3, selected tolerances and TCR DESCRIPTION OF CHANGE: Discontinuation of the selected tolerance & TCR combination of Semi-Precision Thick Film Rectangular Chip Resistors, D/CRCW-P Tin-Lead and D/CRCW-P e3 Lead-Free series REASON FOR CHANGE: Low market demand EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: Not applicable PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay BCcomponents TIME SCHEDULE: Last Time Buy Date: Thu Nov 17, 2022 Last Time Ship Date: Tue May 16, 2023 SAMPLE AVAILABILITY: Not applicable PRODUCT IDENTIFICATION: Not… download now
2022_PTN-DBR-00006-2022-Rev0.pdf Product Group: DBR/Tue May 3, 2022/PTN-DBR-00006-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Discontinuation of Semi-Precision Thick Film Chip Resistors D/CRCW-P and D/CRCW-P e3, selected tolerances and TCR DESCRIPTION OF CHANGE: Discontinuation of the selected tolerance & TCR combination of Semi-Precision Thick Film Rectangular Chip Resistors, D/CRCW-P and D/CRCW-P e3 series REASON FOR CHANGE: Low market demand EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N/A PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay BCcomponents TIME SCHEDULE: Last Time Buy Date: Tue Nov 1, 2022 Last Time Ship Date: Sun Apr 30, 2023 SAMPLE AVAILABILITY: N/A PRODUCT IDENTIFICATION: N/A QUALIFICATION DATA: N/A This PCN is… download now
2022_PTN-DBR-00003-2022-Rev0.pdf Product Group: DBR/Thu Mar 17, 2022/PTN-DBR-00003-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Withdrawal of TCT 0603, TCU 0805, TCA 1206 series DESCRIPTION OF CHANGE: Discontinuation of TCT 0603, TCU 0805, TCA 1206 series REASON FOR CHANGE: Lack of market demand EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: Not applicable PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Beyschlag TIME SCHEDULE: Last Time Buy Date: Fri Sep 30, 2022 Last Time Ship Date: Thu Mar 30, 2023 SAMPLE AVAILABILITY: not applicable PRODUCT IDENTIFICATION: not applicable QUALIFICATION DATA: not applicable This PCN is considered approved, without further notification, unless we receive specific customer concerns before Thu Jun 30, 2022… download now
2022_PTN-AC-00901-2022-Rev0.pdf Product Group: AC/Wed Aug 10, 2022/PTN-AC-00901-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Vishay Sprague Aluminum Capacitors Discontinuance of Radial 515D and 517D Series DESCRIPTION OF CHANGE: Termination of Vishay Sprague series 515D and 517D. Affected part numbers: 515D* and 517D* (all PNs within these families, whether listed or not). REASON FOR CHANGE: Poor availability of key raw materials and low market demand. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N/A PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Sprague TIME SCHEDULE: Last Time Buy Date: Wed Feb 22, 2023 Last Time Ship Date: Mon Aug 21, 2023 SAMPLE AVAILABILITY: N/A PRODUCT IDENTIFICATION: Series name, capacitance and voltage values… download now
2022_PTN-AC-00503-2022-Rev0.pdf Product Group: AC/Tue Jun 14, 2022/PTN-AC-00503-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Vishay BCcomponents Aluminum Capacitors Discontinuance of Radial 038 RSU Series DESCRIPTION OF CHANGE: Termination of Vishay BCcomponents series 038 RSU. Available alternatives can be found in replacement table below. Any PN within these series, whether listed or not, will also be affected. REASON FOR CHANGE: Poor availability of key raw materials and low market demand. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N/A PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay BCcomponents TIME SCHEDULE: Last Time Buy Date: Fri Dec 30, 2022 Last Time Ship Date: Fri Jun 30, 2023 SAMPLE AVAILABILITY: N/A PRODUCT… download now
2022_PI-CC-00001-2022-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters: 63 Lincoln Highway , Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E OF T H E W OR LD ’S LA R GE S T MA N U FA C T U R E R S O F D IS C R E T E S E MIC ON D U C T OR S A N D P A S S IV E C OMP ON E N T S Product Information Product Group : Vis hay Ceramic Capacitors / Nov 24, 202 2 / PI-CC -00 001-202 2 Rev 0 For information only Stamp/inkjet marking as an alternative to laser marking for Cera -Mite brand DESCRIPTION: To ensure that we do not encounter bottlenecks in the laser printing process, we will use stamp/inkjet printing as an alternative to laser printing when necessary. For an actual product image comparison of laser printing and stamp/inkjet printing, please s ee the image s below. This alternative will have no impact on the quality and reliability . According to PCN -CC -001 -2018 Rev1 the Cera -Mite marking is as follow: Marking is done by laser technology . The above are… download now
2022_PDN-IUK2022-003.pdf 8755 W. Higgins Road Product Change Notice IUK 2022 -003 Suite 500 Chicago, IL 60631 www.littelfuse.com 23/05/2022 IUK 2022 -003 Obsolete Sonic Diode 2500V E Series To whom it may concern, This document aims to inform you that the 2500V Sonic Diode E series products are now obsolete. This is a s a result of the market transitioning to the 3300V technology and eliminating the demand for the 2500V Sonic Diode products. The effected part numbers are detailed below. E0280YH25C E0800QC25C E1200NC25C E1200NH25C E2250VF25C E4000TC25C Alternative All alternati ves are contained within our 3300V sonic diode products such as the E1500MC33E and E3000EC33 E. For more information on our 3300V products please visit the following link to our website. https://www.littelfuse.com/products/power -semiconductors/discrete -diodes/fast -recovery/hp -sonic -frd Last Time Buys Any last time buys need to be received by the 30 th November 2022 with the last shipment date of the 28 th February 2023 Best Regards,… download now
2022_PDN-2022-003.pdf page 1 of 1 4.14F14 a P RODUCT D ISCONTINUATION N OTICE PDN No.: 20 22-00 3 Products : Type Possible replacement (s) MDI 200 -12A 4 no replacement MDI 300 -12A 4 no replacement MDI 550 -12A 4 no replacement MID150 -12A 4 no replacement MID200 -12A 4 no replacement MID300 -12A 4 no replacement MID550 -12A4 no replacement MII 150 -12A 4 no replacement MII 200 -12A 4 no replacement MII 300 -12A 4 no replacement Reason : Die discontinuation and low demand Last time order date: No last time order date because of die availability of more than 1 year Existing orders will be fulfilled until last time delivery date Last time delivery date: 20 23-04-30 Internal Reference: PO_202 2-00 3 In case of any question, please contact Initiator Title/Function Date e-mail Andreas Laschek -Enders PM Sept. 20 th 202 2 alaschek -enders@littelfuse.com IXYS Semiconductor GmbH Edisonstr. 15 D-68623 Lampertheim Phone: +49 -6206 -503 -201 Fax: +49 -6206 -503 -627 Customer response: (please fill in and return by e… download now
2022_PDN-2022-001.pdf page 1 of 1 4.14F14 a P RODUCT D ISCONTINUATION N OTICE PDN No.: 20 22-001 IXYS product type: Type Possible replacement (s) MDI75 -12A3 no replacement MDI100 -12A3 no replacement MDI145 -12A3 no replacement MID75 -12A3 no replacement MID100 -12A3 no replacement MID145 -12A3 no replacement MII75 -12A3 no replacement MII100 -12A3 no replacement MII145 -12A3 no replacement Reason : Die discontinuation and low demand Last time order date: No last time order date because of die availability of more than 1 year Existing orders will be fulfilled until last time delivery date Last time delivery date: 20 22-12 -31 Internal Reference: PO_202 2-001 In case of any question, please contact Initiator Title/Function Date e-mail Andreas Laschek -Enders PM June 13 th 202 2 alaschek -enders@littelfuse.com IXYS Semiconductor GmbH Edisonstr. 15 D-68623 Lampertheim Phone: +49 -6206 -503 -201 Fax: +49 -6206 -503 -627 Customer response: (please fill in and return by e -mail, fax or mail within 4 weeks) for… download now
2022_PCN_TR-21099_G21-08877_G21-08878.pdf PCN - Product Change Notification No.: Date: Originator: Subject: Related product: Should you have any issues within this PCN, please contact us within the next 30 days. No response will be deemed as your acceptance. This document or attachment contains information that is proprietary to J.S.T. and shall not be used or shown without written permission. TR-21099_G21-08877_G21-08878 25.11.2022 A. Schaffarczyk SJN connector housing addition of resin material manufacturer ( )P-SJN-( ) / 5P-2.5SJN Reason of change: Identification: via lot no. Because of difficulty of procuring the current material. Housing resin material manufacturer shall be added due to the difficulty of procuring the current resin material: The UL certification, the product performance and the specification remain unchanged. Description of change: schedule: step by step FB_7.5.3.2.3.1JST Deutschland GmbHKüferstr. 15D-73650 W interbach Phone: +49/7181/4007-0 e-mail: customer.service@jst.de www.jst.de register court:… download now
2022_PCN-TR-PCN2203.pdf Lelon Electronics Corp. 147, Sec. 1, Guoguang Rd., Dali District, Taichung, Taiwan Tel: +886-4-2418-1856 Fax: +886-4-2418-1906 E-mail: service@lelon.com www.lelon.com Product Discontinuation Notice Doc. No: TR-PCN2203 Date: 20 22 /08/31 Revision: 1.0 Page: 1 Grade: General To whom it may concern, 敬啟者： Thank you very much for using our products for long time. 感謝您長期以來對立隆產品的支持 Some product decreasing requirement due to recent p rogress and changed in the market. 近期部份產品進展與市場變化致需求減少。 It will be improve production and management effici ency, this products will be discontinued production. The discontinued series and recommend s ubstitution as below: 為提高生產與管理效益，此部份產品將不再繼續供貨／銷售。產品別及其建議替代如下表所 示： Type 型別 Original Series 系列名 Recommended Substitution 推薦替代系列 VE VEJ V-chip VSS VES VEC VEJ VEB VGB REA RGA RLA RA Radial SEA SG SLA SA SS, SSL SSG RN, SN RNG We will continue to provide above series until end of Dec. 2022. The last delivery end of Jul. 2023. 立隆將持續銷售上列產品至 2022年12 月31 日，最後交貨其限為 2023年7月 31… download now
2022_PCN-TR-22072_G22-05748.pdf download now
2022_PCN-TR-22068_G22-05690.pdf download now
2022_PCN-TR-22046_G22-03822.pdf download now
2022_PCN-TR-22030_G22-02325.pdf download now
2022_PCN-TR-22017_G22-01501_JMC.pdf download now
2022_PCN-TR-22014_G22-01252.pdf download now
2022_PCN-TR-22008.pdf PCN - Product Change Notification No.: Date: Originator: Subject: Related product: Should you have any issues within this PCN, please contact us within the next 30 days. No response will be deemed as your acceptance. This document or attachment contains information that is proprietary to J.S.T. and shall not be used or shown without written permission. TR-22008_VL 17.03.2022 A. Schaffarczyk series VL / natural color addition of material VLP-(*)V VLP-(*)V-1 VLP-(*)VN-1 VLP-(*)VS VLR-(*)V VLR-(*)VF VLR-(*)VN VLR-(*)VFS * = circuit no. Reason of change: Identification of change: via lot no. In order to improve the availability of the products. addition of resin material as follows: current material: CM3004V0 / part no. without suffix additional material: PA66-RNG00 / part no. with suffix (SU) example: VLP-06V (SU) suffix (SU) will be deleted after the introductory peroid after this time the standard part no. without suffix will be used for both materials Product performance remain… download now
2022_PCN-TR-21088_R21-0623.pdf PCN - Product Change Notification No.: Date: Originator: Subject: Related product: Should you have any issues within this PCN, please contact us within the next 30 days. No response will be deemed as your acceptance. This document or attachment contains information that is proprietary to J.S.T. and shall not be used or shown without written permission. Description of change: schedule: Step by step TR-21088_PH THT header_R21-0623 14.03.2022 A. Schaffarczyk PH THT header / natural color addition of material B(*)B-PH-K-S (LF)(SN) S(*)B-PH-K-S (LF)(SN) * = circuit no. Reason of change: Identification of change: via lot no. In order to improve the availability of the products. addition of resin material as follows: current material: CM3004V0 / part no. without suffix additional material: PA66-RNG00 / part no. with suffix (SU) example: B4B-PH-K-S (LF)(SN)(SU) suffix (SU) will be deleted after the introductory peroid after this time the standard part no. without suffix will be used for both… download now
2022_PCN-TR-21088_R21-0615.pdf PCN - Product Change Notification No.: Date: Originator: Subject: Related product: Should you have any issues within this PCN, please contact us within the next 30 days. No response will be deemed as your acceptance. This document or attachment contains information that is proprietary to J.S.T. and shall not be used or shown without written permission. Description of change: schedule: Step by step TR-21088_R21-0615_EH header 14.03.2022 A. Schaffarczyk EH header / natural color addition of material B(*)B-EH (LF)(SN) B(*)B-EH-A (LF)(SN) S(*)B-EH (LF)(SN) * = circuit no. Reason of change: Identification of change: via lot no. In order to improve the availability of the products. addition of resin material as follows: current material: CM3004V0 / part no. without suffix additional material: PA66-RNG00 / part no. with suffix (SU) example: B3B-EH (LF)(SN)(SU) suffix (SU) will be deleted after the introductory peroid after this time the standard part no. without suffix will be used for both… download now
2022_PCN-TR-21088_R21-0613.pdf PCN - Product Change Notification No.: Date: Originator: Subject: Related product: Reason of change: Identification of change: via lot no. In order to improve the availability of the products. addition of resin material as follows: current material: CM3004V0 / part no. without suffix additional material: PA66-RNG00 / part no. with suffix (SU) example: B4P-VH (LF)(SN)(SU) suffix (SU) will be deleted after the introductory peroid after this time the standard part no. without suffix will be used for both materials Product performance remain unchanged. Pls. find enclosed test report R21-0613 for more information. Description of change: schedule: Step by step TR-21088_VH header_R21-0613 17.03.2022 A. Schaffarczyk VH header / natural color addition of material B(*)P-VH (LF)(SN) B(*)P(*)-VH (LF)(SN) S(*)P-VH (LF)(SN) S(*)P(*)-VH (LF)(SN) B(*)PS-VH (LF)(SN) B(*)P(*)S-VH (LF)(SN) * = circuit no. FB_7.5.3.2.3.1JST Deutschland GmbHKüferstr. 15D-73650 W interbach Phone: +49/7181/4007-0 e-mail:… download now
2022_PCN-TR-21088_R21-0328_PH.pdf PCN - Product Change Notification No.: Date: Originator: Subject: Related product: Should you have any issues within this PCN, please contact us within the next 30 days. No response will be deemed as your acceptance. This document or attachment contains information that is proprietary to J.S.T. and shall not be used or shown without written permission. Description of change: schedule: Step by step starting Q2 / 2022 TR-21088_R21-0328_PH 12.01.2022 A. Schaffarczyk PH female housing addition of material PHR-(*) * = circuit no. Reason of change: Identification of change: via lot no. In order to improve the availability of the product s. addition of resin material as follows: current material: CM3004V0 / PHR-(*) additional material: PA66-RNG00 / PHR-(*) (L) Product performance remain unchanged. Pls. find enclosed test report R21-0328 R1 for more information. FB_7.5.3.2.3.1 JST Deutschland GmbH Küferstr. 15 D-73650 W interbach Phone: +49/7181/4007-0 e-mail: customer.service@jst.de… download now
2022_PCN-TR-21076-2_G22-03753_R1.pdf download now
2022_PCN-TF-00001-2022-Rev0.pdf Product Group: TF/Thu Jun 30, 2022/PCN-TF-00001-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT M- series Protective Coating Material Change DESCRIPTION OF CHANGE: Vishay Thin Film has qualified a new mechanical protective overcoat for the M- series due to a discontinuance of the current material by our supplier. REASON FOR CHANGE: Supply Discontinuation EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: There will be no effect on quality, reliability, or performance. PART NUMBERS/SERIES/FAMILIES AFFECTED: M-*, MEDM*, VISHAY BRAND(s): Vishay Dale Thin Film,Vishay Thin Film TIME SCHEDULE: Start Shipment Date: Fri Sep 30, 2022 SAMPLE AVAILABILITY: Upon request PRODUCT IDENTIFICATION: Lot number QUALIFICATION DATA: Data is available upon request. This PCN is considered approved,… download now
2022_PCN-TC-001-2022-Rev0.pdf Product Group: TC/Mon Feb 7, 2022/PCN-TC-001-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Addition of Lot ID code to product marking for T52 family DESCRIPTION OF CHANGE: Add four digit Lot ID code to capacitor marking in order to provide individual unit traceability. REASON FOR CHANGE: Improvement of individual unit traceability EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: There is no effect on quality and reliability PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay TIME SCHEDULE: Start Shipment Date: Mon Jul 18, 2022 SAMPLE AVAILABILITY: Upon Request PRODUCT IDENTIFICATION: Not Applicable QUALIFICATION DATA: Not Applicable This PCN is considered approved, without further notification, unless we receive… download now
2022_PCN-SO-221207-2.pdf PILKOR Electronics , 270 Sinwon -Ro, YeongTong -Gu, Kyonggi -Do, Suwon city, Rep. Of Korea. / ☎ +82 -31-546 -5141 / Fax +82 -31-217 -7454 Ref.nr: SO -2212 07-2 Dated Dec . 07th .202 2 Atten tion: Mr. Jochen Staiger / ECOMAL Europe GmbH Subject : Announcement on discontinued productions of Fixed Resistor Dear Mr. Staiger, Thanks for your kind cooperation. We make an announcement that Subject product would be discontinued the productio ns in PILKOR as below. 1. Reason of discontinued production (1) Sharp drop in market demand / Strong competition (2) Difficulty in raising the price of raw materials and purchasing → Small & variety production (3) Rising labor costs (minimum wage) a nd difficulty in supplying manpower (4) Long term deficits 2. Di scontinued production and suppling items : - All product of Fixed Resistor 3. Application date : 31 March 2023 Sincerely Yours, Y. G. Kim / C OO ( Sr . VP ) Pilkor Electronics Division of Cowell Fashion Co.,Ltd. download now
2022_PCN-SO-220630-1.pdf PILKOR Electronics , 270 Sinwon -Ro, YeongTong -Gu, Kyonggi -Do, Suwon city, Rep. Of Korea. / ☎ +82 -31-546 -5141 / Fax +82 -31-217 -7454 Ref.nr: SO -220 630 -1 Dated June . 30 th .202 2 At tention: Mr. Jochen Staiger / ECOMAL Europe GmbH . Subject : Announcement on discontinued productions of PCMT 36 9 type Dear Mr. Staiger Thanks for your kind cooperation. We make an announcement that Subject product would be discontinued the pro ductions in PILKOR as below. 1. Reason of discontinued production 1) Difficulty of raw materials purchasing and production manpower recruiting due to a sharp decrease in market demand. 2) Local complaints arising from noise and process dust generated during the production of the product . 3) Changes in the Chinese government's perception of the environment and stricter regulations make it impossible to produce the product continuously. 2. Di scontinued production and suppling items : - All product of PCMT 369 type 3. Application date : 3 0 November 2022… download now
2022_PCN-SO-220404-3.pdf PILKOR Electronics , 270 Sinwon -Ro, YeongTong -Gu, Kyonggi -Do, Suwon city, Rep. Of Korea. / ☎ +82 -31-546 -5141 / Fax +82 -31-217 -7454 Ref.nr: SO -220404 -3 Dated April . 04 th .202 2 At tention: Mr. Jochen Staiger / ECOMAL Europe GmbH Subject : Announcement on discontinued productions of PCMT 365 / 366 / 367 type Dear Mr. Staiger, Thanks for your kind cooperation. We make an announcement that Subject product would be discontinued the pro ductions in PILKOR as below. 1. Reason of discontinued production 1) Difficulty of raw materials purchasing and production manpower recruiting due to a sharp decrease in market demand. 2) Local complaints arising from noise and process dust generated during the production of the product . 3) Changes in the Chinese government's perception of the environment and stricter regulations make it impossible to produce the product continuously. 2. Di scontinued production and suppling items : - All product of PCMT 365 / 366 / 367 type 3. Application date :… download now
2022_PCN-SIL-0162022.pdf download now
2022_PCN-SIL-013-2022-Rev0.pdf Product Group: SIL/Thu Dec 8, 2022/PCN-SIL-013-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Vishay Siliconix Announces New Material of Solder Paste for Commercial Power MOSFET in PowerPAK 1212 Packages DESCRIPTION OF CHANGE: To continue the supply of target commercial power MOSFETs, Vishay Siliconix announces the new solder paste, Pb95Sn5, is adopted in PowerPAK 1212 package to replace the original material, Pb88Sn10Ag2, for the yield improvement. REASON FOR CHANGE: Yield Improvement EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: There will be no effect on quality, reliability, performance, and the minimum/maximum values in the datasheet. The material composition of Die-Attach will be changed accordingly as shown in the following page. PART NUMBERS/SERIES/FAMILIES… download now
2022_PCN-SIL-011-2022-Rev0.pdf Product Group: SIL/Wed Jun 15, 2022/PCN-SIL-011-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT PI Material Improved Definition Process Change DESCRIPTION OF CHANGE: Change of Polyimide material from DUR 116A to LTC 9320 using a photo defined process. There will be no change in performance or reliability. REASON FOR CHANGE: Capacity Expansion EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: None PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Siliconix TIME SCHEDULE: Start Shipment Date: Tue Dec 13, 2022 SAMPLE AVAILABILITY: Production using this new process starting in October 2022 PRODUCT IDENTIFICATION: There will be no change to part numbering QUALIFICATION DATA: For detailed information, refer to the… download now
2022_PCN-SIL-001-2022-Rev0.pdf Product Group: SIL/Fri Jan 7, 2022/PCN-SIL-001-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Vishay Siliconix Announces New Material of Epoxy for Commercial Power MOSFET in ChipFET, TSSOP8, PowerPAIR6x3.7 Packages DESCRIPTION OF CHANGE: To continue the supply of target commercial power MOSFETs, Vishay Siliconix announces the new epoxy, ABP6389, is adopted in ChipFET, TSSOP8, and PowerPAIR 6x3.7 packages to replace the original epoxy material, Loctite Abelestik 2600BT, which is discontinued since 2022/1/1 by the vendor, Henkel. The new epoxy, ABP6389, is supplied by Ablestik Shanghai in China who has thequality certification of IATF16949: 2016 certified by DQS. Ablestik Shanghai is one of the qualified epoxy suppliers of Simconix.The reliability with the new epoxy is completed… download now
2022_PCN-SIL-000408-2022-Rev0.pdf Product Group: SIL/Wed Nov 23, 2022/PCN-SIL-000408-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT DG9424/5/6E Datasheet Update DESCRIPTION OF CHANGE: Change of Turn-on time Full temp Max limit specification for 3V Single supply from 193 ns to 230 ns REASON FOR CHANGE: Update limits more accurately EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: There will be no effect on performance, quality or reliability. PART NUMBERS/SERIES/FAMILIES AFFECTED: DG9424EDN-T1-GE4, DG9424EDQ-T1-GE3, DG9425EDQ-T1-GE3, DG9426EDQ-T1- GE3, VISHAY BRAND(s): Vishay Siliconix TIME SCHEDULE: Start Shipment Date: Thu Feb 23, 2023 SAMPLE AVAILABILITY: Now: 11/23/22 PRODUCT IDENTIFICATION: Date Code from 9/1/22 QUALIFICATION DATA: Comparison Data Attached This PCN is considered approved, without… download now
2022_PCN-SIL-000407-2022-Rev0.pdf Product Group: SIL/Wed Nov 23, 2022/PCN-SIL-000407-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT DG9424/5/6E Datasheet Update DESCRIPTION OF CHANGE: Change of Turn-on time Full temp Max limit specification for 3V Single supply from 193 ns to 230 ns REASON FOR CHANGE: Update limits more accurately EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: There will be no effect on performance, quality or reliability. PART NUMBERS/SERIES/FAMILIES AFFECTED: DG9424EDN-T1-GE4, DG9424EDQ-T1-GE3, DG9425EDQ-T1-GE3, DG9426EDQ-T1- GE3, VISHAY BRAND(s): Vishay Siliconix TIME SCHEDULE: Start Shipment Date: Mon Jan 23, 2023 SAMPLE AVAILABILITY: Now: 11/23/22 PRODUCT IDENTIFICATION: Date Code from 9/1/22 QUALIFICATION DATA: Comparison Data Attached This PCN is considered approved, without… download now
2022_PCN-SIL-000404-2022-Rev0.pdf Product Group: SIL/Mon Jun 20, 2022/PCN-SIL-000404-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Additional wafer Capacity for Vishay Siliconix VR Power Stages DESCRIPTION OF CHANGE: To meet increasing demand, shorten lead time and provide a disaster recovery capability, Vishay Siliconix has expanded capacity for its ICs wafer fabrication to Global Foundry REASON FOR CHANGE: Additional Capacity EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: There will be no effect on performance, quality or reliability. PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Siliconix TIME SCHEDULE: Start Shipment Date: Tue Sep 20, 2022 SAMPLE AVAILABILITY: Now PRODUCT IDENTIFICATION: Lot Number QUALIFICATION DATA: Qualification… download now
2022_PCN-SF-318-2022-REV0.pdf Product Group: SF/Mon Nov 14, 2022/PCN-SF-318-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT INTRODUCTION OF ALTERNATIVE GREASES ON T93, T9, M64 MODEL DESCRIPTION OF CHANGE: Introduction of alternative greases REASON FOR CHANGE: Due to discontinuation of grease material, we have secured grease provision thanks to double source of grease. Grease is used to reduce wear between wiper and collector. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: No influence on Quality/Reliability/Performance, according to qualification results PART NUMBERS/SERIES/FAMILIES AFFECTED: T93*, T9X*, T9Y*, T9Z*, M64* VISHAY BRAND(s): Vishay Sfernice TIME SCHEDULE: Start Shipment Date: Sat Jan 14, 2023 SAMPLE AVAILABILITY: From December 14th 2022 PRODUCT IDENTIFICATION: DC >= 2303 QUALIFICATION… download now
2022_PCN-SF-310-2022-Rev0.pdf Product Group: SF/Tue Sep 20, 2022/PCN-SF-310-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Sfernice CHP/HCHP/CHPHT Series Low Ohmic Values Range Modification DESCRIPTION OF CHANGE: 200 ppm/°C TCR is not anymore available for the lower ohmic values (0,1 Ohm < Vo < 0,5 Ohm). REASON FOR CHANGE: Adaptation of product range and industrial tools to market demand. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: This is NOT obsolescence nor a change in the product. Production processes will stay the same. Final products, tests and periodic surveillance are remaining identical. There will be NO impact on Quality, Reliability or Performances. Values ranging from 0,1 Ohm to 0,5 Ohm are available with a tolerance of 5% (J code) and a TCR of 300ppm/°C (M code). PART… download now
2022_PCN-SF-302-2022-Rev0.pdf Product Group: SF/Tue May 31, 2022/PCN-SF-302-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Sfernice MEPIC Ignitors copper plating process subcontracting DESCRIPTION OF CHANGE: In line with our commitment for continuous improvement, Vishay Sfernice is transferring the copper plating process to a qualified subcontractor. Products specifications remain unchanged. REASON FOR CHANGE: VISHAY Sfernice is modifying the copper plating process for an enhanced robustness and transferring to subcontractor for an increased production capacity. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: This is NOT obsolescence nor a change in the product. The Transfer will have no impact on the form, fit, function and reliability of the devices. Final products, tests and periodic surveillance… download now
2022_PCN-SF-300-2022-Rev0.pdf Product Group: SF/Fri May 20, 2022/PCN-SF-300-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT INTRODUCTION OF ALTERNATIVE GREASES ON P11S, 149, P11P, 249 MODEL DESCRIPTION OF CHANGE: Introduction of alternative greases REASON FOR CHANGE: Due to discontinuation of grease material, we have secured grease provision thanks to double source of grease. Grease is used to reduce wear between wiper and collector and for electrical noise reduction. We have qualified those 2 alternatives greases. If you require a specific qualification process, please let us know ASAP. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: No influence on Quality/Reliability/Performance, according to qualification results PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding… download now
2022_PCN-SF-0316-2022-Rev0.pdf Product Group: SF/Tue Oct 25, 2022/PCN-SF-0316-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT D2TO : Qualification of a new internal soldering alloy DESCRIPTION OF CHANGE: D2TO020 & D2TO035 : qualification of a new internal soldering alloy (Silver paste) from an AgPd and RoHS- with-exemptions glass to an AgPd and RoHS glass. REASON FOR CHANGE: Raw material procurement safety EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: None PART NUMBERS/SERIES/FAMILIES AFFECTED: D2TO* VISHAY BRAND(s): Vishay Sfernice TIME SCHEDULE: Start Shipment Date: Mon Apr 24, 2023 SAMPLE AVAILABILITY: Fe, 13th 2023 PRODUCT IDENTIFICATION: Date code Week 11 2023 QUALIFICATION DATA: Qualification report available on request This PCN is considered approved, without further notification, unless we… download now
2022_PCN-SF-0315-2022-Rev0.pdf Product Group: SF/Mon Oct 24, 2022/PCN-SF-0315-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT LTO100 & LTO100H Manufacturing location change and qualification of a new internal soldering alloy DESCRIPTION OF CHANGE: LTO100 & LTO100H Manufacturing location change from Vishay Volary CZ to Vishay Blatna CZ. Qualification of a new internal soldering alloy (Silver paste) from an AgPd and RoHS-with-exemptions glass to an AgPd and RoHS glass. REASON FOR CHANGE: Capacity expansion and raw material procurement safety EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: None PART NUMBERS/SERIES/FAMILIES AFFECTED: LTO100F*, LTO100H*, VISHAY BRAND(s): Vishay Sfernice TIME SCHEDULE: Start Shipment Date: Mon Mar 13, 2023 SAMPLE AVAILABILITY: Feb, 13th 2023 PRODUCT IDENTIFICATION: Date Code… download now
2022_PCN-SF-00322-2022-Rev0.pdf Product Group: SF/Fri Nov 25, 2022/PCN-SF-00322-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT SECOND SOURCE OF SUPPLY FOR THE SLIDING CONTACT ECS SERIES DESCRIPTION OF CHANGE: Introduction of a second source of supply for the sliding contact (wiper) Source #1 and source #2 are interchangeable. One can be used in place of the other from batch to batch. REASON FOR CHANGE: Securization of the supply chain (double sourcing) EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: None PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Sfernice TIME SCHEDULE: Start Shipment Date: Tue May 30, 2023 SAMPLE AVAILABILITY: Not available PRODUCT IDENTIFICATION: Date Code QUALIFICATION DATA: Qualification Test Report on Request This… download now
2022_PCN-SF-00309-2022-Rev0.pdf Product Group: SF/Fri Sep 2, 2022/PCN-SF-00309-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT 981HE0B5WB0015 - PRODUCTION MOVE (FR to CZ) DESCRIPTION OF CHANGE: Assembly line moves from Nice factory (France) to Blatna factory (CZ) REASON FOR CHANGE: Rationalization of resources and production capacities EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: None PART NUMBERS/SERIES/FAMILIES AFFECTED: 981HE0B5WB0015 VISHAY BRAND(s): Vishay Sfernice TIME SCHEDULE: Start Shipment Date: Thu Nov 10, 2022 SAMPLE AVAILABILITY: Nov 11, 2022 PRODUCT IDENTIFICATION: Date Code QUALIFICATION DATA: Data available on request This PCN is considered approved, without further notification, unless we receive specific customer concerns before Sun Oct 2, 2022 or as specified by contract. ISSUED BY:… download now
2022_PCN-SF-00297-2022-Rev0.pdf Product Group: SF/Tue Apr 19, 2022/PCN-SF-00297-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT LASER MARKING 16x / 5xx SERIES DESCRIPTION OF CHANGE: New laser marking is replacing ink marking REASON FOR CHANGE: limit ink consumption as part of continuous process improvement EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: None PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Spectrol TIME SCHEDULE: Start Shipment Date: Mon Sep 19, 2022 SAMPLE AVAILABILITY: Samples available on request PRODUCT IDENTIFICATION: Date Code QUALIFICATION DATA: Qualification data available on request This PCN is considered approved, without further notification, unless we receive specific customer concerns before Mon Jul 18, 2022 or… download now
2022_PCN-SF-00289-2022-Rev0.pdf Product Group: SF/Thu Jan 20, 2022/PCN-SF-00289-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT SECOND SOURCE OF SUPPLY FOR THE SLIDING CONTACT VARIOUS SERIES (RO134/156/176/200/300 RE14L/16L LMF W ACAPTCURSEUR 34T) DESCRIPTION OF CHANGE: Introduction of a second source of supply for the sliding contact (wiper) Source #1 and source #2 are interchangeable. One can be used in place of the other from batch to batch. REASON FOR CHANGE: Securization of the supply chain (double sourcing) EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: None PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Sfernice TIME SCHEDULE: Start Shipment Date: Sat Jul 30, 2022 SAMPLE AVAILABILITY: YES - Mar. Mon. 28, 2022 PRODUCT IDENTIFICATION:… download now
2022_PCN-SF-00288-2022-Rev0.pdf Product Group: SF/Tue Jan 18, 2022/PCN-SF-00288-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT REC SERIES, RMF, 34T CHANGE OF EPOXY RESIN DESCRIPTION OF CHANGE: The epoxy resin reference “A” is commonly used as a mechanical strengthen or structural fixation of various elements of our position sensors products range (external or internal parts / sub-assemblies). For our REC Series, some RMF KITS and 34T, the current reference “A” (blue) will be replaced by an equivalent performances epoxy resin reference “B” (black). REASON FOR CHANGE: Obsolescence of the catalyst of the current epoxy ref. “A” EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: None PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Sfernice TIME… download now
2022_PCN-OPT-1255-2022-Rev0.pdf Product Group: OPT/Thu Nov 24, 2022/PCN-OPT-1255-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT VLMU161x-365-135 datasheet update, increase of radiant flux DESCRIPTION OF CHANGE: The radiant flux of the VLMU161x-365-135 series increases from 14-26mW, typ. 23mW to 20-30mW, typ. 25mW at 20mA and from typ. 63mW to typ. 68mW at 60mA. Along with that the lower radiant flux bins R3, R4 and R5 are cancelled and the bins R9 and R10 are added at the upper side. Annotations about time schedule: The exact change date will be a function of the depletion of the existing product inventories. REASON FOR CHANGE: Increase of radiant flux due to continuous improvement of chip efficiency, better performance. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: No impact on quality, better… download now
2022_PCN-OPT-1240-2022-Rev0.pdf Product Group: OPT/Tue Nov 8, 2022/PCN-OPT-1240-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Change of Cast IR Receivers materials DESCRIPTION OF CHANGE: -Introduction of a second source epoxy material for all Cast packages. -Introduction of a new in-house designed IR Receiver IC for "Mneme" and "Methone" IC parts: The Cyllene 2 will replace the "Mneme" and "Methone" ICs in existing Product Series without a name change. It will provide similar electrical and optical characteristics, at nearly 50 percent less current consumption. Besides it provides the best receiving range in bright ambient. The mechanical dimensions remain unchanged. We recommend to test the product in customers application. REASON FOR CHANGE: - Introduction of a second source epoxy material: Offer short lead… download now
2022_PCN-OPT-1239-2022-Rev0.pdf Product Group: OPT/Wed Sep 21, 2022/PCN-OPT-1239-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Chip change for 5mm green LEDs from GaP to AlInGaP. DESCRIPTION OF CHANGE: The phasing out GaP technology chip will be replaced by the state-of-the-art AlInGaP chip technology. REASON FOR CHANGE: Discontinuation of GaP process EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: Improved degradation behavior, higher brightness allows lower driving current. PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Semiconductors TIME SCHEDULE: Start Shipment Date: Tue Mar 21, 2023 SAMPLE AVAILABILITY: Oct 17, 2022 PRODUCT IDENTIFICATION: New device names: TLHG5420*, TLHG6420*, TLLG5420* QUALIFICATION DATA: Available on request.… download now
2022_PCN-OPT-1237-2022-Rev0.pdf Product Group: OPT/Thu Sep 22, 2022/PCN-OPT-1237-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Second source of photodetector for IL4x and BRTx series DESCRIPTION OF CHANGE: Introduction of a Vishay-fabricated photodetector REASON FOR CHANGE: To ensure product availability for years to come, Vishay introduces an inhouse designed and fabricated photodetector as an alternative to the existing photodetector used in the IL4X and BRTx phototriacs. By manufacturing the finished product, the infrared emitter, and now the photodetector, our phototriac line is more vertically integrated. Both sources of the photodector will be used in the near-term for a smooth transition. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: There is no impact on the form, fit, or function of the IL4x… download now
2022_PCN-OPT-1234-2022-Rev0.pdf Product Group: OPT/Mon Sep 19, 2022/PCN-OPT-1234-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Changes of materials for TFDU4301 DESCRIPTION OF CHANGE: -Introduction of a new in-house designed IRDC IC. The Chaldene IC provides 20 percent longer distance (in meters) and improved ESD robustness from current 1kV to 2kV. -Introduction of a new Surface Emitting Technology Chip. -Changeover of the Au wire Diameter from 30um to 25um. We recommend to test the product in customers application. REASON FOR CHANGE: - New IC: The existing external IC Supplier will end the production. In order to assure a long-term product availability of IRDC products, Vishay developed an inhouse IC in cooperation with the worlds leading Chip Foundry. -New Emitter Chip: Changeover to latest Surface Emitting… download now
2022_PCN-OPT-1229-2022-Rev0.pdf Product Group: OPT/Mon Oct 10, 2022/PCN-OPT-1229-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT TCPT1300X01/TCUT1300X01: Change of IR emitter chip and wafer diameter for Phototransistor DESCRIPTION OF CHANGE: Change in Chips: - A new IR Emitter chip generation will be introduced - The Phototransistors are now manufactured on 6 inch wafers instead of the 4 inch wafers - Wire diameter for Phototransistors has changed from 32um to 20um This change results in no change in device characteristics nor in the fit,form and function. No change in datasheet. REASON FOR CHANGE: IR Emitters: Introduction of new chip generation Phototransistors : Discontinuation of the 4 inch wafer substrates EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: No influence on quality,reliability and… download now
2022_PCN-OPT-1225-2022-Rev0.pdf Product Group: OPT/Mon Sep 19, 2022/PCN-OPT-1225-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Change of Minimold IR Receivers materials DESCRIPTION OF CHANGE: -Changeover of the Au wire Diameter from 25um to 20um for all Minimold products. -Introduction of a new in-house designed IR Receiver IC for "Mneme" and "Methone" IC parts: The new Cyllene 2 IC uses the latest Chip Technology of the worlds leading IC Foundry. The Cyllene 2 will replace the "Mneme" and "Methone" ICs in existing Product Series without a name change. It will provide similar electrical and optical characteristics, at nearly 50 percent less current consumption. Besides it provides the best receiving range in bright ambient. The mechanical dimensions remain unchanged. We recommend to test the product in… download now
2022_PCN-OPT-1224-2022-Rev0.pdf Product Group: OPT/Thu Aug 4, 2022/PCN-OPT-1224-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Introduction of new Cyllene2 IC DESCRIPTION OF CHANGE: Introduction of a new in-house designed IR Receiver IC: The Cyllene 2. This IC uses the latest Chip Technology of the worlds leading IC Foundry. The Cyllene 2 will replace the "Mneme" and "Methone" IC in existing Product Series without a name change. It will provide similar electrical and optical characteristics, at nearly 50 percent less current consumption. Besides it provides the best receiving range in bright ambient. The mechanical dimensions remain unchanged. We recommend to test the product in customers application. REASON FOR CHANGE: The existing external IC Supplier has announced to end production. To assure a long-term… download now
2022_PCN-OPT-1219-2022-Rev0.pdf Product Group: OPT/Tue Jul 12, 2022/PCN-OPT-1219-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Change of Quantity per Reel for LF based 0603 LEDs from 3kpcs (-GS08) to 5kpcs (-GS15) DESCRIPTION OF CHANGE: The quantity per reel, the delivery unit (DU), as well as the minimum delivery quantity (MDQ) and the minimum order quantity (MOQ) is changed from 3kpcs per reel to 5kpcs per reel. The device name and order code suffix changes from - GS08 to -GS15. Annotations about time schedule: The new part names with the suffix -GS15 and 5kpcs per reel will be active from August 2022 onwards. The PCN is considered approved, without further notification, unless we receive specific customer concerns before 01-Sep-2022 or as specified by contract. New orders still using the old device names… download now
2022_PCN-NLR-011-2022-Rev0.pdf Product Group: NLR/Thu Dec 15, 2022/PCN-NLR-011-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Change in Resistor Color Coding DESCRIPTION OF CHANGE: Being environmentally conscious, Vishay has the intention to eliminate the color-coding process used for NTCLE100 series. The function of this color-coding is to visually identify the resistance value and tolerance of individual parts (similar to fixed resistor coding). This function is mainly used in the aftermarket and the color-coding process has a high impact on the environmental footprint of our production process. REASON FOR CHANGE: Environmental EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: None PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay… download now
2022_PCN-NLR-00009-2022-REV0.pdf Product Group: NLR/Wed Nov 9, 2022/PCN-NLR-00009-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Addition of New Ring Terminal supplier. DESCRIPTION OF CHANGE: Vishay will release a new supplier of the ring terminal, a raw material, used for the manufacturing of NTCALUG series. REASON FOR CHANGE: Second source activity to assure reliable delivery performance EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: None PART NUMBERS/SERIES/FAMILIES AFFECTED: NTCALUG* VISHAY BRAND(s): Vishay BCcomponents TIME SCHEDULE: Start Shipment Date: Sat Apr 1, 2023 SAMPLE AVAILABILITY: upon request PRODUCT IDENTIFICATION: N/A QUALIFICATION DATA: Available upon request This PCN is considered approved, without further notification, unless we receive specific customer concerns before Sun Jan 1,… download now
2022_PCN-MLC-00002-2022-Rev0.pdf Product Group: MLC/Mon Jan 31, 2022/PCN-MLC-00002-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT 2nd Source Supplier to Ratings of VJ Commercial MLCC Low Cap Values C0G(NP0) Dielectric, Case Size 0402, 0603 DESCRIPTION OF CHANGE: 2nd source supplier for dielectric material C0G (NP0) used for low cap MLCCs, case sizes 0402, 0603. REASON FOR CHANGE: As part of our commitment to provide quality products, world-class support and reduce risk in the supply chain, we are pleased to inform you that a second source dielectric material supplier has passed qualification testing for dielectric material C0G (NP0) used for low cap MLCCs. The tests are conducted in accordance with AEC-Q200 standards. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: No influence is expected. PART… download now
2022_PCN-LFPCN220919.pdf Product Change Notification (PCN) N° LFPCN2 209 19 Page 1 of 4 4.14F12c Date : September 1 9th, 202 2 Dear Valued Customer, Littelfuse would like to notify you about the transfer of the backend manufacturing of some of our Y1 package part s to our inhouse assembly factory in Lipa, Philippines. This new Littelfuse facility combines the very best operational excellence and semiconductor expertise to deliver a highly automated, world class facility designed, to meet IATF16949 & VDA6.3 requirements. Our clear focus being to bring high levels of service to our customers and quality products to support future growth of the power semiconductor business. Please find enclosed all details related to this PCN. Important information for your attention and according to JEDEC STANDARD “JESD46”: ◼ Please acknowledge receipt of this PCN . In your acknowledgement, you can grant approval or r equest additional information. ◼ Littelfuse will assume the change is acceptable if no acknowledgement is… download now
2022_PCN-LFPCN0030822.pdf 8755 W. Higgins Road Product Change Notice (PCN) Suite 500 Chicago, IL 60631 www.littelfuse.com Friday, August 26, 2022 LFPCN0030822 Product Termination Notification for Littelfuse IXKF40N60SCD1 To our valued customers and partners , Littelfuse would like to notify you about the termination of the IXKF40N60SCD1 (600V/ 41 A M osfet with antiparallel Schottky diode in ISOPLUS i4™) in consequence of the trade sanctions on Russia. The termination is effective immediately . There is not last time buy possibility. Please contact your Regional Sales representative of Field Application Engineer for any inquiry or further details. Best Regards, Francois Perraud Product Marketing Manager, SiC and multichip discrete Littelfuse, Inc. FPerraud@Littelfuse.com download now
2022_PCN-LFPCN0020922.pdf 8755 W. Higgins Road Product Change Notice (PCN) Suite 500 Chicago, IL 60631 www.littelfuse.com Wednesday, September 14, 2022 LFPCN0020922 Product Change Notification for Littelfuse FMM75 -01F To our valued customers and partners , Littelfuse would like to notify you about the transfer of the backend manufacturing of our part number FMM75 -01F (100V/75A HyPerFET™ half bridge in ISOPLUS i4™ ) to our new inhouse assembly factory in Lipa, Philippines. This brand -new assembly factory will fulfill our strategy to invest in state -of-the -art power semiconductor assembly capabilities and improve our service levels to customers. Summary of the changes associated to the transfer of assembly location: - Form, fit, f unction changes: None - Part number changes: None - Effective date: Week 40, 2022 (week starting Oct. 2 nd 2022) - Replacement products: N/A - Last time buy: N/A - Backend Assembly Bill of Materials: No change - Backend Assembly Process Flow: No change - Backend Assemb ly… download now
2022_PCN-LFPCN0010922.pdf 8755 W. Higgins Road Product Change Notice (PCN) Suite 500 Chicago, IL 60631 www.littelfuse.com Wednesday, September 14, 2022 LFPCN0010922 Product Change Notification for Littelfuse FMD40 -06KC To our valued customers and partners , Littelfuse would like to notify you about the transfer of the backend manufacturing of our part FMD40 -06KC (600V/ 38 A boost leg in ISOPLUS i4™) to our new inhouse assembly factory in Lipa, Philippines. This brand -new assembly factory will fulfill our strategy to invest in state -of-the -art power semiconductor assembly capabilities and improve our service levels to customers. Summary of the changes associated to the transfer of assembly location: - Form, fit, function changes : None - Part number changes: None - Effective date: Week 40, 20 22 (wee k startin g Oct. 2 nd 2022) - Replacement products: N/A - Last time buy: N/A - Backend Assembly Bill of Materials: No change - Backend Assembly Process Flow: No change - Backend Assembly Equipment: Equal or… download now
2022_PCN-LFPCN-PG0137.pdf To: Littelfuse Sales, Sales Support & Valued Customer s From : Littelfuse Product Management – Industrial Business Unit Subject : SPF J Series Product Label Update Document Number : LFPCN_PG 0137 Date : 8th June 2022 Dear Valued customer: This notice is to inform changes in SPF J Series fuses product label that is implemented in the manufacturing recently . Per UL Agency guidelines SPFJ product UL Issue Number was recently updated, during this process we also received additional directives from UL on the label format; this resulted in ongoing changes to our SPFJ Series Product label . Listed below are the changes implemented . During this transition customer would receive products with varying label formats; this letter is to assure customer that all those labels are acceptable be UL Agency and do not have any impact to fuse electrical or mechanical performance characteristics. Part# Affected SPFJ125.X, SPFJ160.X and SPFJ200.X Label Description Current Version Intermediate change… download now
2022_PCN-LFPCN-PG0133.pdf To : Littelfuse Sales, Sales Support & Valued Customer s From : Littelfuse Product Management – Industrial Business Unit Subject : SPFI Series Product & Box Label Update Document Number : LFPCN_PG 013 3 Date : 18 th Apr 2022 Dear Valued customer: This notice is to inform changes SPFI Series fuses product and box label to facilitate production. To optimize manufacturing process and improve productivity we are moving SPFI Series product label from body printed version to paper label version as seen in the image below. Paper labels proposed are already used in similar photovoltaic products such as SPF (1000V) , SPXV and SPXI (1500V) Series products and are found reliable and widely accepted. There are NO Changes to electrical or mechanical performance for this SPFI Series products . Also, we added UR certification label to the Box Label. Date of implementation : Effective Immediate (3rd Week of April) Label Description Current Version Proposed Version Product Label Box Label Part Numbers… download now
2022_PCN-LFPCN-PG0131.pdf To: Littelfuse Sales, Sales Support & Valued Customer s From: Littelfuse Product Management – Industrial Business Unit Subject: 0TLS Product Update To Improve Supply Base Material Breadth and Improve Appearance Document Number: LFPCN_PG 0131 Da te: Rev 07 /18 /2022 This notice is to inform customers of a modification that will be made to TLS fuses in order to increase the breadth of the supply base from which m etal materials are available. The c urrent element strip materials are only available from specia lty suppl iers . In addition, the caps will be c hanged to nickel plating in order to reduce appearance issues that na turally develop on the current caps over time. There is not impact to product per formance with cap nickel plating. Please see the in clu ded file for additional details prepared by the Littelfu se Enginee ring t eam. The ef fectiv e date of thi s product update is expected to be Jul y 18, 2022 . This is a running change Also, please see attached list with part numb… download now
2022_PCN-LFPCN-220317.pdf March 17 th, 2 022 PCN # LFPCN220317 – IXYS Brand Schottky Diode Power Module Pre -PCN Letter To our valued customers , Littelfuse would like to notify you that due to suppl y disruption from Russia, we are no longer in position to accept more order and procure affected IXYS Brand Schottky Diode Power Module s part numbers listed below . Part number Pac kage Disposition DSA 120X150LB -TRR SMPD Qualify alternative source DSA120X 15 0LB-TUB SMPD Qualify alternative source DSA 120X200LB -TRR SMPD Qualify alternative source DSA 120x200LB -TUB SMPD Qualify alternative source We are actively working on alternative source to retain our suppl y chain, but we will estimate 3~9 months qualification time necessary before we could accept new order fr om our customers. Littelfuse is also reviewing on hand WIP and material stock to fulfill as much as possible for existing backlog. If you have any questions or concerns, please contact your local sales team or Pascal Ducluzeau , Power Modu les ,… download now
2022_PCN-LFPCN-41450.pdf Littelfuse, Inc. 8755 W est Higgins Road, Suite 500 Chicago, IL 60631 USA (773) 628 -1000 Jul 20 t h , 20 22 RE: LFPCN 41 450- TVS STD DO-214A B(SMC) package additional Epoxy Molding Compound and A ssembly/Test location approval To: Our Valued Customers Ef f ective 1 Oct 2022, Littelfuse will be adding a new e poxy molding compound (EMC) f or our DO -214AB package including SMCJ, 1.5SMC, SMDJ, 3.0SMC/J, 4. 0SMDJ, and 5.0SMDJ/S Series (the Af f ected Series). This urgent addition is n ecessary d ue to circumstances beyond Littelf use, as the current supplier recently obsoleted the EMC used by the Af fected Series with a last time buy of Sep 2022 . To f urther strengthen the security and continuity of supply f or our customers, Littelfuse will be adding a new assembly and test site location in the Phili ppines f or the Af fected Series. Currently, such products have a country of origin China. Due to the EMC and location change, the process and struct ure for 5.0SMDJ series only has been… download now
2022_PCN-LFPCN-41443.pdf 1 LFPCN# : 41443 May 30 th 202 2 To: Valued customers From: Littelfuse Product Management Subject: Manufacturing Site Extension for Poly Swit ch ® China Made Surface Mountable PPTC As a production contingency plan, Littelfuse is going to use Littelfuse Japan plant as the alternative manufacturing site for Poly Switch ® China made Surface Mountable PP TC s. There is no change on the quality, reliability, and functionality of these products , parts made -in Japan are sharing exact ly same specification as made -in China parts . Since it was founded in 1994, Littelfuse Japan plant has shipped billions pieces PolySwitch® parts to global market for various applications which include (but not limited to) Automotive, Industrial, Consumer Electronics. Littelfuse Japan plant is both ISO and IATF certifi ca ted. ISO 9001: 2015 IATF 16949:2016 2 Parts made in Littelfuse Japan plant had be en fully qualified in accordance with established performance and reliability criteria. Full qualification… download now
2022_PCN-LFPCN-6084E.pdf 8755 W. Higgins Road Product Change Notice (PCN) Suite 500 Chicago, IL 60631 www.littelfuse.com May 13 th, 202 2 Product Change Notification of A dd ing UKCA marking on LSP Module Series. LF PCN 6084 E To whom it may concern, Littelfuse would like to notify you of a chang e regarding adding UKCA marking on the LSP Module Series ’ product label based on the new requirements from the United Kingdom . Please refer to the following label change example . This is a marking change only and it has no impact to the product’s original electrical parameters and mechanical/dimensional specification, reliability, performance, and part number . Th is label change will be implemented starting from June 1 7th, 202 2. During the change transition period, customers are expected to receive the products with current and /or new products label until current product inventory in Littelfuse warehouses and distribution channels are depleted. 8755 W. Higgins Road Product Change Notice (PCN) Suite 500 Chicago,… download now
2022_PCN-LFPCN-6047E.pdf 8755 W. Higgins Road Product Change Notice (PCN) Suite 500 Chicago, IL 60631 www.littelfuse.com July 1 2th, 202 2 Product Change Notification for LSP05GI and LSP10GI Module Series Cable Wire Change for Class I Luminaire Installation (X3333) and Class II Luminaire Installation (X3316). LFPCN 6047E To whom it may concern, Litte lfuse would like to notify you of a change regarding LSP05GI and LSP10GI Module Series Cab le W ire . This cable wire change will ensure LSP05GI and LSP10GI Module Series continue to meet the wire dimension requirement based on IEC 61643 -11 and UL1449 . Please refer to the following cable wire change summary . This cable wire change will maintain product’s original electrical parameters , reliability, performance, and part number . Th is change will be implemented starting from Oct ober 17th, 202 2, during the change transition period, customers are expected to receive the products with current and new cable wire until current product inventory in Littelfuse… download now
2022_PCN-LFPCN-2022-001.pdf Product Change Notice (PCN) Littelfuse, Inc. 8755 West Higgins Road, Suite 500 Chicago, IL 60631 USA (773) 628 -1000 1 March 15 , 202 2 LFPCN USA202 2-001 Product Change Notification for Littelfuse MOSFET DISCRETE and Discrete IGBT in TO -220 package , change of manufacturing location To whom it may concern, Littelfuse would like to notify you of a change related t o the TO -220 package DESCRIPTION OF CHANGE : As a part of Littelfuse endeavors to improve the manufacturing footprint, it has been decided to introduce a new TO -220 backend manufacturing site for the affected part number s listed below . With this a dditional capacity to support the upcoming customer demands. Country of origin to change from Korea to China . Form, fit, function changes: No change in the silicon dice used. We would like to notify you on the differences seen with this change: 1. POD – Package Outline Dimension 2. Package Marking 3. Tube/Reel/Inner Box Label Marking 4. Inner Box Package 5. Tube Package 6.… download now
2022_PCN-G22-04087.pdf download now
2022_PCN-G21-08868.pdf download now
2022_PCN-FC-002-2022-Rev0.pdf Product Group: FC/Wed Apr 20, 2022/PCN-FC-002-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Additional Manufacturing Location for Film Capacitors in pitch 37.5mm and 52.5mm DESCRIPTION OF CHANGE: Vishay is pleased to announce capacity expansion for series MKP1848H, F340X1, F340X2, F339MX2, MKP338 4, MKP1847H, MKP1847C, MKP385, MKP385e in pitch 37,5mm and 52.5mm, by adding additional manufacturing site option. The production capacity for above series is expanded by adding Loni (India) manufacturing site to the current manufacturing location. REASON FOR CHANGE: Capacity expansion EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: None PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay BCcomponents,Vishay Roederstein… download now
2022_PCN-ESW490-44.pdf June 2 8 th, 2 022 PCN # ESW490- 44 – Thyristor & Diode TO247_ISO247_PLUS247_ISOPLUS247 Packaging Location Transfer To our valued customers , Littelfuse would like to notify you that we will transfer our backend assembly process of Thyristor & Diode products TO247 / ISO247 / PLUS247 / ISOPLUS247 Packages to our new inhouse assembly factory in Lipa, Philippines. This brand- new assembly factory is to fulfill our strategy to invest in state- of-the- art power semiconductor assembly capabilities to dramatically improve our service levels to customers . Our target is to build this factory as a world class facility with automated, error proof processes to meet the highest quality standards . Contact our local Sales team in case you would like to understand more about this new factory. B elow is the detail changes associate w ith this Assembly Location change: 1) Silicon Die: No change 2) Backend Assembly Bill of Materials: No change 3) Backend Assembly Process Flow : No change 4) Backend… download now
2022_PCN-ESW490-42.pdf August 11 th, 2 02 2 [Update] ESW490 -42 – IXYS Brand Schottky Diode Discrete Alternative Qual Status To our valued customers , As Littelfuse already noticed in previous Pre- PCN# ESW490 -42, we are ongoing qualifying alternative source to retain our suppl y chain due to Russia Sanction. And this letter will advise our latest progress and timeline and we appreciate customer could bear the qualification time to allow Littelfuse presenting best quality product as usual. Due to large scope of project, Littelfuse al ready divided PCN into four phases and below is the estimated timeline accordingly. A more detail part number level PCN timing attached in appendix as well to allow specific part number tracking. Part Number Qty PCN Time Phase 1 21 parts Sep-22 Phase 2 75 parts Dec-22 Phase 3 19 parts Mar-23 Phase 4 32 parts Sep-23 If you have any questions or concerns, please contact your local sales team or Zhiwei Wang, Power Diode Discrete, P roduct Marketing Manager. We value your business… download now
2022_PCN-ESU270-77.pdf March 24 th, 20 22 RE: PCN # ESU270 -77 –TVS Diode Array Device EOL To o ur valued customers, Littelf use would like to no tify you the d iscontinuance of TVS Diode Array (SPA® Diodes) p roduct s due to Supply Chain instab ility. Ef fective date: March 24 th, 202 2 Last time b uy d ate : June 30 th, 202 2 Final p ro d uct shipment d ate: Dec 31 st, 202 2 Littelf use recognizes and respects the need to allow time for o ur customers to transition existing designs, and we are co mmitted to assist in the pro cess. Part Numbers Affected: Affected Part Numbers Commercial Replacement Automotive Replacement RF3918 -000 SP0201B -ULC -01UTG RF2193 -000 RF3917 -000 SP0201U -ULC -01UTG RF2192 -000 SP1007 -01WTG SP1026 -01UTG AQ1026 -01UTG SP3002 -04UTG NA NA SP3012 -06UTG SC7538 -08UTG (functional) AQ7538 -08UTG (functional) SP0502BXTG NA AQ3102 -02JTG (functional) SP5001 -04TTG NA NA SP1050 -04BTG NA NA SRV05 -4HTG SRV05 -4HTG -D AQRV05 -4HTG RF3923 -00 0 SC1004U -ULC -04UTG SP1004U -ULC -04UTG… download now
2022_PCN-EIC-1106.pdf July 18 th, 2022 PCN EIC -110 6 Notification of Datasheet Update LAA127L To our valued customers , Littelfuse would like to notify you about the LAA127L datasheet correction on Input Control Current to Deactivate. There is no change to physical product itself. Old value : New Value: The updated datasheet has already been published to the Littelfuse web site: LAA127L_R08.indd (littelfuse.com) Form, fit, function changes: None Part number changes: None Effective date: Immediately Replacement products: N/A Last time buy: N/A If you have any other questions or concerns, please contact your local Littelfuse sales representative or Product Man ager below for further assistance. Anne Bauer Product Manager Solid State Relays (SSR) Tel: +49 42182873149 abauer@littelfuse.com 8755 W. Higgins Road Suite 500 Chicago, Illinois USA 60631 download now
2022_PCN-EIC-1105.pdf Product Change Notice (PCN) Littelfuse, Inc. 8755 West Higgins Road, Suite 500 Chicago, IL 60631 USA (773) 628 -1000 1 July 1 st, 2022 LFPCN EIC -1105 End of Life of IX9907 and IX9908 series Detailed Description of Change As part of the Littelfuse IXYS Integrated Circuits Division’s (ICD) product lifecycle -management process, the following products have been transitioned to an “end -of-life” (EOL) status without replacement: • IX9907N • IX9907NTR • IX9908N • IX9908NTR • IX99 08 -EVAL In order to sa tisfy any continuing requirements for these parts, Littelfuse IXYS Integrated Circuits Division is offering a non -cancelable last time buy (LTB). Orders for LTB quantities must be received by July 31, 2022 , and all LTB products must have shipment request d ates by September 30, 2022. Acceptance of last time buy orders is subject to product availability and product lead time. Once placed, LTB orders cannot be cancelled, rescheduled, or returned. While we will endeavor to complete all last… download now
2022_PCN-EIC-1104.pdf Product Change Notice (PCN) Littelfuse, Inc. 8755 West Higgins Road, Suite 500 Chicago, IL 60631 USA (773) 628 -1000 1 June 27 th, 202 2 PCN EIC -110 4 Integrated Circuits Optical Multifunction Products Detailed Description of Change As part of the Littelfuse IXYS Integrated Circuits Division’s (ICD) product lifecycle -management process, the following products have been transitioned to an “end -of-life” (EOL) status without replacement : To satisfy any continuing requirements for these parts, Littelfuse IXYS Integrated Circuits Division is offering a non -cancelable last time buy (LTB). Orders for LTB quantities must be received by September 30 , 20 22, and all LTB product s must have shipment request dates by October 30 , 202 2. Acceptance of last time b uy orders is subject to product availability and product lead time . Once placed, LTB orders cannot be cancelled, rescheduled, or returned. While we will endeavor to complete all last time buy requests, severe supply chain… download now
2022_PCN-EIC-1102.pdf April 11 , 2022 PCN EIC -1102 Assembly Facility Change Product Change Notification for Littelfuse Power Solid State Relays packaged in I4-PAC, ISOPLUS -264, and Super SIP DCB -based assemblies. To our valued customers , IXYS Integrated Circuits Division (ICD), now part of Littelfuse, would like to notify you that we will transfer and consolidate the assembly and test process of the below products to another facility , also in the Philippines. CPC1708J CPC1779J CPC1918J CPC1978J CPC1709J CPC1786J CPC1927J CPC1979J CPC1718J CPC1788J CPC1967J CPC1986J CPC1727J CPC1908J CPC1968J CPC1988J CPC1777J CPC1909J CPC1977J CPC40055ST Please note: PCN 1097 previously issued for part number CPC1998J. Therefore, part is not included in this PCN . Below are the detail changes associate d with this transfer and consol idation : 1) Silicon Die : No Change 2) Assembly Bill of Materials : No Change 3) Assembly Process Flow : No Change 4) Assembly Equipment : Equal or Better 5) Test Equipment : No Change 6)… download now
2022_PCN-EIC-1101.pdf Product Change Notice (PCN) Littelfuse, Inc. 8755 West Higgins Road, Suite 500 Chicago, IL 60631 USA (773) 628 -1000 1 March 4, 202 2 PCN EIC -1101 Detailed Description of Change As part of the Littelfuse IXYS Integrated Circuits Division’s (ICD) product lifecycle -management process, the following products have been transitioned to an “end -of-life” (EOL) status: • CPC5001G • CPC5001GS • CPC5001GSTR • CPC5002G • CPC5002GS • CPC5002GSTR • CPC5902G • CPC5902GS • CPC5902GSTR • CPC5903G • CPC5903GS • CPC5903GSTR • CPC5902G_03G -EVAL In order to satisfy any continuing requirements for these parts, Littelfuse IXYS Integrated Circuits Division is offering a non -cancelable last time buy (LTB). Orders for LTB quantities must be received by June 01, 2022 , and all LTB product s must have ship ment request dates by July 01, 202 2. Acceptance of last time b uy orders is subject to product availability and product lead time . Once placed, LTB orders cannot be cancelled, rescheduled, or returned.… download now
2022_PCN-EIC-1100.pdf Product Change Notice (PCN) Littelfuse, Inc. 8755 West Higgins Road, Suite 500 Chicago, IL 60631 USA (773) 628 -1000 1 March 3, 202 2 PCN EIC -1100 Detailed Description of Change As part of the Littelfuse IXYS Integrated Circuits Division’s (ICD) product lifecycle -management process, the following products have been transitioned to an “end -of-life” (EOL) status without replacement : • IX9915N • IX9915NTR In order to satisfy any continuing requirements for these parts, Littelfuse IXYS Integrated Circuits Division is offering a non -cancelable last time buy (LTB). Orders for LTB quantities must be received by May 31 , 20 22, and all LTB product s must have shipment request dates by June 30 , 202 2. Acceptance of last time b uy orders is subject to product availability and product lead time . Once placed, LTB orders cannot be cancelled, rescheduled, or returned. While we will endeavor to complete all last time buy requests, severe supply chain constraints may mean we do not manage to… download now
2022_PCN-EE-PCN22010.pdf EE -PCN22010 Coin Cell Packaging PCN Notice Letter .docx Eaton Electronics Division 5735 W. Las Positas Blvd #100 Pleasanton, CA 94588 www.eaton.com/ electronics Product Change Noti ce PCN#: EE -PCN 22010 06 /08 /2022 CLASSIFICATION OF CHANGE: Packaging DESCRIPTION OF CHANGE: Remove packaging foam and replaced with additional product trays. This change also increases the minimum order quantity, minimum ship quantity and increment. REASON FOR CHANGE: Reduce packaging materials and waste. EXPECTED INFLUENCE ON QUALITY , RELIABILITY , AN D PERFORMANCE : There will be no effect on the quality, reliability, or performance. There are n o changes to form, fit, and function of the device s. PARTS AFFECTED : Part Number Current Box/Bag Quantity New Box Qty KR -5R5V105 -R 500 600 KR -5R5V155 -R 500 600 KR -5R5H105 -R 500 600 KR -5R5H155 -R 500 600 TIME SCHEDULE: Start Shipment Date: September 1 Last Time Buy Date: N/A Last Time Shipment Date: N/A SAMPLE AVAILABILITY : N/A QUALIFICATION DATA :… download now
2022_PCN-DR-00020-2022-Rev0.pdf download now
2022_PCN-DR-00017-2021-Rev2.pdf Product Group: DR/Thu Jun 16, 2022/PCN-DR-00017-2021-REV-2 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT WSC/WSN High Temperature Exposure DESCRIPTION OF CHANGE: High Temperature Exposure and power derating curves are being restored to 275 °C, but with a revised limit from 0.5% (previous) to 2% (new). REASON FOR CHANGE: (Revision levels are split due to database limitation to 1,000 part numbers) Rev 0 & 1: High temperature exposure rating was based on equivalent temperature exposure rating of the internal subassembly instead of the WSC/WSN SMD assembly. The reduction is to reflect the limitations of the standard Lead Free solder SMD process and FR4 materials used in customer applications for testing and qualification. Rev 2 & 3: The new revision is driven by application based discussions… download now
2022_PCN-DR-00015-2022-Rev0.pdf Product Group: DR/Mon Oct 17, 2022/PCN-DR-00015-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT WSL1020 - Increase Tolerance Dimension DESCRIPTION OF CHANGE: WSL1020 width tolerance stated on the datasheet is being revised from 0.100” ± 0.005” to 0.100” ± 0.01” for maximum dimensions of 0.090” to 0.110”. The nominal dimensional value is not being changed. This PCN is an informational revision of the datasheet with no performance change. REASON FOR CHANGE: The tolerance change is not a change in the construction of the part and so there is no impact on performance. The dimensional tolerance change does not change the recommended pad design. The tolerance change is to optimize manufacturability. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: No impact on FORM or FUNCTION;… download now
2022_PCN-DR-00012-2022-Rev0.pdf Product Group: DR/Thu Sep 8, 2022/PCN-DR-00012-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT WSL0805 & WSL0805-18 - Addition of Manufacturing Site DESCRIPTION OF CHANGE: Columbus, NE, USA is being added as a manufacturing location for the welded construction WSL0805 & WSL0805-18 part numbers. Production will continue in the existing location in Beer-Sheva Israel. This will increase total production capacity to improve availability and support greater production flexibility. REASON FOR CHANGE: Due to high market demand, qualified manufacturing is being expanded to Columbus, NE, USA. The location is ISO9001 and IATF16949 certified and is currently producing Automotive grade products, such as WSLx2512 and WSLx1206. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: No Change,… download now
2022_PCN-DR-00011-2022-Rev1.pdf Product Group: DR/Thu Aug 4, 2022/PCN-DR-00011-2022-REV-1 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Retraction of PTN-DR-0001-2022-Rev-0. Regarding End of Life (EOL) Notification for all Display Products / Modules; including all associated goods and services pertaining to LCD, OLED, and Color TFT products. DESCRIPTION OF CHANGE: Withdrawal of PTN-DR-00011-2022-Rev-0. REASON FOR CHANGE: Vishay will continue to supply all previous LCD, OLED, and Color TFT to Distribution and OEM customers. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N/A PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Dale TIME SCHEDULE: Start Shipment Date: Fri Aug 5, 2022 SAMPLE AVAILABILITY: Immediate PRODUCT IDENTIFICATION: All FG1… download now
2022_PCN-DR-00009-2022-Rev0.pdf Product Group: DR/Mon Feb 28, 2022/PCN-DR-00009-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT WSL,WSL-18,WSLP,WSLP-18 and WSKx Marking Removal DESCRIPTION OF CHANGE: Part numbers starting with WSL or WSK that have a black overcoat will have the white part marking removed from the product. This marking will be removed from date codes 2309 on which is start of production date of March 1st 2023. From this point on the parts shall have just the black overcoat. REASON FOR CHANGE: The removal of the part marking will improve the efficiency of the process and reduce the amount of time for AOI setup at the customer side. The current marking of these parts can differ slightly from each manufacturing location and this current difference leads to extra discussion of the products that can… download now
2022_PCN-DR-00004-2022-Rev0.pdf Product Group: DR/Thu Feb 3, 2022/PCN-DR-00004-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT WSHM2818 & WSHP2818 (0.001 ohm only) TCR Revision DESCRIPTION OF CHANGE: A change to the TCR test method resulted in the need to revise the TCR rating of the product that only affects 0.001 ohm resistance value at the lowest temperature extreme. This resistance range could experience up to 250 ppm/ °C at the lowest temperatures from the previously stated 200 ppm/°C. Detailed TCR data is available upon request. REASON FOR CHANGE: The TCR test method was revised to reflect the full operational range of the product by reducing the low temperature test point from -55°C to -65°C. The revised value is to maintain Cpk measurement requirements. EXPECTED INFLUENCE ON… download now
2022_PCN-DR-00003-2022-Rev0.pdf Product Group: DR/Wed Jan 26, 2022/PCN-DR-00003-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT WSL5931 & WSLP5931 - Add Juarez, Mexico as an additional manufacturing location. DESCRIPTION OF CHANGE: Add Juarez, Mexico as an additional manufacturing location to our current Columbus, NE location for WSL5931 / WSLP5931 resistors. REASON FOR CHANGE: Add a second manufacturing site to increase capacity and ensure source of supply with two manufacturing locations of Columbus & Juarez. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: No change to Fit, Form, or Function. PART NUMBERS/SERIES/FAMILIES AFFECTED: WSL5931*, WSLP5931*, VISHAY BRAND(s): Vishay Dale TIME SCHEDULE: Start Shipment Date: Tue Feb 1, 2022 SAMPLE AVAILABILITY: Available upon request. Please include comments with… download now
2022_PCN-DI-00534-2022-Rev0.pdf Product Group: DI/Mon Jan 24, 2022/PCN-DI-00534-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT HLP2020CZ-1A, IHLP2020CZ-11, and IHLP2020CZ-1L data sheet correction DESCRIPTION OF CHANGE: Data sheet updates REASON FOR CHANGE: This PCN addresses necessary updates to the IHLP2020CZ-1A, IHLP2020CZ-11, and IHLP2020CZ-1L series of power inductors. The datasheet updates do not indicate a change in the performance of the individual P/N’s, but rather the changes align the datasheet parameters with the actual performance parameters of these IHLP inductors. No action is needed from the customer as the IHLP design, materials and process of are not changing and the customer will receive the same product and performance as in year’s past. For future designs, it is recommended to refer to the… download now
2022_PCN-DD-037-2022-Rev0.pdf Product Group: DD/Fri Dec 30, 2022/PCN-DD-037-2022-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Additional In-House Backend Assembly Site for Automotive Grade Rectifiers and TVS Products in SMPC Package For further information, please contact your regional Vishay office. Description of Change: To support BCP (Business Continuity Program), Vishay Diodes Division is introducing an additional in-house back-end manufacturing site for Automotive Grade products in SMPC package (Case Outline: TO-277A). This assembly site is located in Kaohsiung, Taiwan, and already has manufacturing experience in Automotive Grade surface mount packaged products. Meanwhile, wafer diameter for S4PxHM3 series products will be converted from 4inch to 5inch. Please refer to annex 1 for change view and LTB/LTS information.… download now
2022_PCN-DD-036-2022-Rev0.pdf Product Group: DD/Mon Dec 19, 2022/PCN-DD-036-2022-REV-0 © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS,SET FORTH AT www.vishay.com/doc?91000 Fred Pt® 200V wafers photomasking and metallization changes For further information, please contact your regional Vishay office. Description of Change: Vishay Diode Division is implementing some changes in the photo-masking and metal deposition process steps, in order to consolidate and harmonize the manufacturing flows in the Wafer Fab. As a result, the relevant changes are: -The total top metallization thickness on solderable top metal chips will be changed by reduced Al layer thickness. No change in the thickness of the die-to-clip layer metal interfaces (Ag-Ni-Ti). (See Annex 2) -Die corner plugs will be introduced on wire bondable top metal chips (See Annex 3). Die sizes and active areas will not… download now
2022_PCN-DD-035-2022-Rev0-VERSION-17646.pdf Product Group: DD/Tue Dec 13, 2022/PCN-DD-035-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Alternate diode wafer chip in 1KAB product family DESCRIPTION OF CHANGE: To secure the supply chain for our customers, Vishay Semiconductors announces the qualification of an alternate diode Wafer chip for 1KAB product family. The D-38, 1KAB Package Outline Dimension (POD) will be consolidated with the updated drawings. (See Annex 1 for details) REASON FOR CHANGE: Supply chain security EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: There is no effect on Quality, Reliability or Performance of the Product. PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Semiconductors TIME SCHEDULE: Start Shipment Date: Wed Jun 14,… download now
2022_PCN-DD-033-2022-Rev0.pdf Product Group: DD/Tue Nov 29, 2022/PCN-DD-033-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Additional In-House Backend Assembly Site and Lead Frame Consolidation for Automotive Grade TVS and Zener in SMB Package DESCRIPTION OF CHANGE: To support BCP (Business Continuity Program), Vishay Diodes Division is introducing an additional in-house back-end manufacturing site for Automotive Grade TRANSZORB® TVS and Zener products in SMB package (Case Outline: DO-214AA). This new assembly site is located in Kaohsiung, Taiwan. Meanwhile, top lead frame design will be changed from round dimple to square stage and Vishay Tianjin will apply the consolidated lead frame design as well. Please refer to annex 1 for change view and LTB/LTS information. There is no change in form, fit and… download now
2022_PCN-DD-031-2022-REV0-VERSION-16656.pdf Product Group: DD/Mon Nov 14, 2022/PCN-DD-031-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Additional substrate used in SOT-227 DESCRIPTION OF CHANGE: Vishay Semiconductors announces the qualification of a new additional substrate used in SOT-227. This new part shows differences in metallization material used with respect to the existing substrate. REASON FOR CHANGE: Capacity increase and supply chain security. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: There will be no effect on product quality, reliability or performance. PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Semiconductors TIME SCHEDULE: Start Shipment Date: Tue May 16, 2023 SAMPLE AVAILABILITY: Samples available upon request PRODUCT… download now
2022_PCN-DD-029-2022-Rev0.pdf Product Group: DD/Mon Nov 7, 2022/PCN-DD-029-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT IGBT wafer diameter change and materials consolidation in Power Modules DESCRIPTION OF CHANGE: Vishay Semiconductors announces the wafer diameter change from 8’’ to 12’’ of IGBT chips used in below power modules. Taking the chance of this announcement, Vishay also communicates qualified materials to be used in some of the listed Part Number to support customers demand (See details in Annex1). REASON FOR CHANGE: Obsolescence of 8 inches wafer from IGBT supplier and supply chain securement. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: There will be no effect on product quality, reliability or performance. PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the… download now
2022_PCN-DD-028-2022-Rev0.pdf Product Group: DD/Tue Oct 25, 2022/PCN-DD-028-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Manufacturing Location Change for Automotive Grade 1.5KE TVS Products DESCRIPTION OF CHANGE: Vishay Diodes Division will be transferring the assembly & final test location of automotive grade 1.5KE Axial Transient Voltage Suppressors (TVS) products from Vishay Shanghai, China to Vishay Tianjin, China. All materials, process and controls are kept the same as in the current production in Shanghai. There is no change in form, fit and functions of the devices in customer applications. The label size of inner reel/box is different from the products manufactured in Shanghai factory however all the required information could be found on the label for identification. Please refer to annex 1 for… download now
2022_PCN-DD-027-2022-Rev0.pdf Product Group: DD/Tue Oct 11, 2022/PCN-DD-027-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Change of Ink Colour on some Small Signals bare die/wafers DESCRIPTION OF CHANGE: The color of the marking ink for Small Signal Bare Die and wafer biz being used in the Vishay Heilbronn FAB will change from currently green to black. (See Annex 1 for visual details) REASON FOR CHANGE: Forced interruption of the green ink machine EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: No change in quality, reliability and performance PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Semiconductors TIME SCHEDULE: Start Shipment Date: Mon Oct 17, 2022 SAMPLE AVAILABILITY: Available under request PRODUCT IDENTIFICATION: New parts… download now
2022_PCN-DD-026-2022-Rev0.pdf Product Group: DD/Thu Sep 15, 2022/PCN-DD-026-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Manufacturing Location Change for Commercial Grade 1.5KE and 5KP TVS Products DESCRIPTION OF CHANGE: Vishay Diodes Division will be transferring the assembly & final test location of commercial grade 1.5KE and 5KP Axial Transient Voltage Suppressors (TVS) products from Vishay Shanghai, China and Vishay Taipei, Taiwan to Vishay Tianjin, China. All materials, process and controls are kept the same as in the current production in Shanghai and Taipei. There is no change in form, fit and functions of the devices in customer applications. 1.5KE label size of inner reel/box is different from the products manufactured in Shanghai factory however all the required information could be found on the… download now
2022_PCN-DD-025-2022-Rev0.pdf Product Group: DD/Tue Sep 6, 2022/PCN-DD-025-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Manufacturing Location Change for Bridge Packages DESCRIPTION OF CHANGE: Vishay Diodes Division is transferring the assembly & final test of Bridge products in DFM, DFS and DFS low profile packages from Jiangsu to Sichuan, China. This new location is an existing Vishay qualified assembly house for other Bridge rectifiers. Taking this opportunity, the wafer foundry, molding compound will be changed and consolidated to align with other Bridge products in the same location. In addition, the lead frame will be modified to accommodate the automatic assembly process, but the package outline dimensions will remain unchanged. There is no change in form, fit and function on all involved products.… download now
2022_PCN-DD-022-2022-Rev0.pdf Product Group: DD/Thu Jul 28, 2022/PCN-DD-022-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Additional base material used in Super Magn-A-Pak power modules DESCRIPTION OF CHANGE: Additional base material, with slight difference in appearance (see Annex 1) and used in SMAPs built by compression bonding technology is qualified to strengthen the supply chain. REASON FOR CHANGE: Supply chain securement EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: There will be no effect on product quality, reliability, or performance. PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Semiconductors TIME SCHEDULE: Start Shipment Date: Sun Jan 29, 2023 SAMPLE AVAILABILITY: Samples available upon request PRODUCT IDENTIFICATION:… download now
2022_PCN-DD-018-2022-Rev0.pdf Product Group: DD/Tue Jul 12, 2022/PCN-DD-018-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Alternate material for Cathode and Gate eyelet DESCRIPTION OF CHANGE: Vishay Diode Division has qualified Fe POO as alternate material for Cathode and Gate eyelet on TO-48 and Stud products. This material is already used in existing Vishay stud mounted diodes (DO-203AB). REASON FOR CHANGE: Security of supply chain EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: There is no effect on Quality, Reliability or Performance of the Product. PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Semiconductors TIME SCHEDULE: Start Shipment Date: Wed Jan 11, 2023 SAMPLE AVAILABILITY: Within 20 days from date of request PRODUCT… download now
2022_PCN-DD-016-2022-Rev0.pdf Product Group: DD/Tue Jun 28, 2022/PCN-DD-016-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Additional In-House Backend Assembly Site for Automotive Grade Products in SMB and SMC Package DESCRIPTION OF CHANGE: To support BCP (Business Continuity Program), Vishay Diodes Division is introducing another additional in- house back-end manufacturing site for Automotive Grade products in SMB package (Case Outline: DO-214AA) and SMC package (Case Outline: DO-214AB). This new assembly site is located in Kaohsiung, Taiwan. There is no change in form, fit and function on all involved part numbers. REASON FOR CHANGE: Capacity expansion and Risk management EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: No change in quality and reliability performance. PART NUMBERS/SERIES/FAMILIES… download now
2022_PCN-DD-015-2022-Rev0.pdf Product Group: DD/Tue Jun 21, 2022/PCN-DD-015-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Additional Schottky Wafer Foundry for Commercial Grade SMPC, SMP and MicroSMP Rectifiers DESCRIPTION OF CHANGE: In addition to the existing in-house Schottky wafer source, Vishay Diodes Division is introducing a subcontractor Schottky foundry in Tianjin, China for commercial grade SMPC, SMP and MicroSMP 20V~60V Schottky rectifiers. This additional Schottky wafer foundry was already introduced before through PCN-DD-006-2020. There will be no change in form, fit and function on all involved products. REASON FOR CHANGE: Capacity expansion EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: No changes in quality and reliability performance PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see… download now
2022_PCN-DD-014-2022-Rev0.pdf Product Group: DD/Tue Jun 21, 2022/PCN-DD-014-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Additional Final Test Location for Commercial Rectifiers in SMA and SMB Package DESCRIPTION OF CHANGE: To support BCP (Business Continuity Program), Vishay Diodes Division is introducing another additional final test location in Shandong, China for Commercial Grade products in SMA package (Case Outline: DO-214AC) and SMB package (Case Outline: DO-214AA). This subcontractor is a qualified subcontractor for the assembly and TMTT of TVS products in SMA & SMB packages introduced thru. PCN-DD-012-2018. There is no change in form, fit and function on all involved part numbers. REASON FOR CHANGE: Capacity expansion and Risk management EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: There… download now
2022_PCN-DD-011-2022-Rev0.pdf Product Group: DD/Fri May 20, 2022/PCN-DD-011-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Additional supplier for base used in Int-A-Pak and Magn-A-Pak power modules DESCRIPTION OF CHANGE: Additional supplier for base material, with slight difference in appearance, used in both IAPs and MAPs built by compression bonding technology is qualified to strengthen the supply chain. REASON FOR CHANGE: Capacity increase and supply chain security. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: There will be no effect on product quality, reliability or performance. PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Semiconductors TIME SCHEDULE: Start Shipment Date: Mon Nov 21, 2022 SAMPLE AVAILABILITY: Samples… download now
2022_PCN-DD-010-2022-Rev0.pdf Product Group: DD/Fri May 6, 2022/PCN-DD-010-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Additional supplier for substrate used in SOT-227 DESCRIPTION OF CHANGE: Additional supplier for substrate used in SOT-227 was qualified for strengthening the supply chain. REASON FOR CHANGE: Capacity increase and supply chain security. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: There will be no effect on product quality, reliability or performance. PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Semiconductors TIME SCHEDULE: Start Shipment Date: Mon Jul 11, 2022 SAMPLE AVAILABILITY: Samples available upon request PRODUCT IDENTIFICATION: Batch code (contact factory for the details) QUALIFICATION DATA: Available… download now
2022_PCN-DD-009-2022-Rev0.pdf Product Group: DD/Tue Apr 5, 2022/PCN-DD-009-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Additional In-House Backend Assembly Site and Lead Frame Consolidation for Commercial Grade TVS and Zener in SMB Package DESCRIPTION OF CHANGE: To support BCP (Business Continuity Program), Vishay Diodes Division is introducing an additional inhouse back-end manufacturing site for Commercial Grade TRANSZORB® TVS and Zener products in SMB package (Case Outline: DO-214AA). This new assembly site is located in Kaohsiung, Taiwan. Meanwhile, top lead frame design will be changed from round dimple to square stage as illustrated below (table 1), and Vishay Tianjin will apply the consolidated lead frame design later. There is no change in form, fit and function on all involved part numbers.… download now
2022_PCN-DD-007-2022-Rev0.pdf Product Group: DD/Wed Mar 30, 2022/PCN-DD-007-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Additional In-House Backend Assembly Site for Commercial Rectifiers and TVS in SMC Package DESCRIPTION OF CHANGE: To support BCP (Business Continuity Program), Vishay Diodes Division is introducing an additional in-house back-end manufacturing site for Commercial Grade products in SMC package (Case Outline: DO-214AB). This new assembly site is located in Kaohsiung, Taiwan. There is no change in form, fit and function on all involved part numbers. REASON FOR CHANGE: Assembly site EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: No change in quality and reliability performance PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s):… download now
2022_PCN-DD-004-2022-Rev0.pdf Product Group: DD/Thu Mar 17, 2022/PCN-DD-004-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Additional Wafer Fab Site Qualification DESCRIPTION OF CHANGE: To secure the supply chain for our customers, Vishay Semiconductor announces the qualification of an additional Wafer Fab for some Metal and Plastic DO-5 (DO-203AB) Part Numbers. REASON FOR CHANGE: Capacity increase and supply chain security EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: There is no effect on Quality, Reliability or Performance of the Product. PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Semiconductors TIME SCHEDULE: Start Shipment Date: Sun Sep 18, 2022 SAMPLE AVAILABILITY: Available on request PRODUCT IDENTIFICATION: N/A… download now
2022_PCN-DD-003-2022-Rev0.pdf Product Group: DD/Fri Mar 4, 2022/PCN-DD-003-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Additional Manufacturing Site for Axial Plastic Open-Junction DESCRIPTION OF CHANGE: For manufacturing backup and delivery consistency, Vishay Diodes Division is introducing an additional manufacturing site for Consumer Grade Plastic Open-Junction in Axial packages (Case Outline: DO-214AL, DO-201AD and P600). This subcontractor located in Shandong, China is already an existing supplier of other products. In additions, the chip size and shape on P600 package will be different from current subcontractor as described as attached on page 3. There is no change in form, fit and function (finished goods dimensions) on all involved part numbers. REASON FOR CHANGE: Manufacturing backup and… download now
2022_PCN-DD-002-2022-Rev0.pdf Product Group: DD/Fri Mar 4, 2022/PCN-DD-002-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Additional In-House Backend Assembly Site for Commercial Rectifiers in SMB Package DESCRIPTION OF CHANGE: To support BCP (Business Continuity Program), Vishay Diodes Division is introducing an additional in-house back-end manufacturing site for Commercial Grade products in SMB package (Case Outline: DO-214AA). This new assembly site is located in Kaohsiung, Taiwan. There is no change in form, fit and function on all involved part numbers. REASON FOR CHANGE: Capacity expansion and Risk management EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: No change in quality and reliability performance PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page.… download now
2022_PCN-DD-001-2022-Rev0.pdf Product Group: DD/Fri Feb 4, 2022/PCN-DD-001-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Wafer source of Switching General Purpose SMF Diodes DESCRIPTION OF CHANGE: Vishay is qualifying an additional, alternative, external wafer source from a supplier in China for commercial/industrial grade Switching Diodes in SMF (DO-219AB) Package. REASON FOR CHANGE: Capacity expansion EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: No changes on electrical characteristics, reliability and performance. PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Semiconductors TIME SCHEDULE: Start Shipment Date: Mon Aug 8, 2022 SAMPLE AVAILABILITY: Available upon request PRODUCT IDENTIFICATION: N/A QUALIFICATION DATA: Available upon… download now
2022_PCN-DBR-00011-2022-Rev0.pdf Product Group: DBR/Tue Nov 1, 2022/PCN-DBR-00011-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Discontinuation of Resistance Value Marking for TNPS....ESCC Series, Hi- Rel Thin Film Chip Resistors 0603-1206 size DESCRIPTION OF CHANGE: Discontinuation of Resistance Value Marking for TNPS....ESCC Series, Hi-Rel Thin Film Chip Resistors 0603- 1206 size REASON FOR CHANGE: Optimization of production process EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: Minor PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Draloric TIME SCHEDULE: Start Shipment Date: Sun May 7, 2023 SAMPLE AVAILABILITY: December 1st, 2022 for AOI test purpose (undefined resistance / TCR - tolerance specification) PRODUCT IDENTIFICATION: No… download now
2022_PCN-DBR-00009-2022-Rev0.pdf Product Group: DBR/Tue Jun 21, 2022/PCN-DBR-00009-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Tolerance adjustment of bottom terminal dimension in 0402 case size within thick film resistors product portfolio DESCRIPTION OF CHANGE: The tolerance of bottom terminal dimension (T1) in 0402 case size within thick film chip resistors portfolio is adjusted to the standard international requirements REASON FOR CHANGE: Adjustment of dimension T1 tolerance to standard international requirements EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: None PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay BCcomponents TIME SCHEDULE: Start Shipment Date: Wed Dec 21, 2022 SAMPLE AVAILABILITY: 09/01/2022 PRODUCT IDENTIFICATION:… download now
2022_PCN-AC-00502-2022-Rev0.pdf Product Group: AC/Mon Mar 7, 2022/PCN-AC-00502-2022-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Vishay BCcomponents Capacitors Series 013 RLC, 036 RSP, 116 RLL Case size 5x11mm DESCRIPTION OF CHANGE: Change of wire/lead diameter from 0.5mm to 0.6mm. Affected are only parts from series 013 RLC, 036 RSP, 116 RLL in case size 5x11mm. REASON FOR CHANGE: Standardization reasons in production process. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: No influence in quality and/or reliability. The 0.6mm wires are in use for more than one decade. Possibly, minor changes on PCB are required. PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay BCcomponents TIME SCHEDULE: Start Shipment Date: Sun Sep 18, 2022 SAMPLE… download now
2022_PCN-20221122.pdf W eidmüller GmbH & Co. KGKlingenbergstraße 26 D-32758 DetmoldT +49 (0) 52 31 14 28-0 F +49 (0) 52 31 14 28-1 16weidmueller@weidmueller.deF +49 (0) 52 31 14 28-116 Seite 1 von 1Detmold,22.11.2022Julian Pohl+49 (0) 52 31 14 28-225Julian.Pohl@weidmueller.comTKommanditgesellschaftSitz: DetmoldRegistergericht Lemgo HRA 4183USt-ID-Nr. DE124599901W EEE-Reg.-Nr. DE73937473Komplementärin: W eidmüller Führungs GmbH Sitz: DetmoldRegistergericht Lemgo HRB 5717Geschäftsführer: Dr. Timo BergerDr. Christian von TollBankverbindungen:Commerzbank AGIBAN: DE03 4808 0020 0283 2884 00BIC: DRESDEFF480Deutsche BankIBAN: DE73 47670023 0437 4922 00BIC: DEUTDE3B476Postgiro HannoverIBAN: DE94 2501 0030 0088 9443 01BIC: PBNKDEFFXXXProduktabkündigung mit AlternativeECOMAL Europe GmbHKommission: Berghof GmbHEinkauf ElektrotechnikWilhelm-Schauenberg-Straße 779199 KirchzartenKd.-Nr. 0000059770Sehr geehrte Damen und Herren,Weidmüller steht für leistungsfähige Verbindungen! In einem Prozess ständiger Weiterentwicklung… download now
2022_PCN-20221014.pdf Oct 14 th, 20 22 Notification of Thyristor & Diode TO -247 Package MOQ Change _ Phase 1 To whom it may concern , This is a declaration letter to state that Littelfuse will change the MOQ for Thyristor & Diode TO -247 Package products aligning to manufacture requirement . Detail affected part number list refer to Appendix . There will be no change on product fit, form, function , and no change to MPQ /Packing Mode. We value your business and look forward to assisting you whenever possible. Thank you! Sincerely and Best Regards, Sophia Lv Global Product Manager Thyristor and Rectifier Diode Semiconductor Business Unit, Wuxi, China +86 510 85277701 - 79 67 slv@littelfuse.com 8755 W. Higgins Road Suite 500 Chicago, Illinois USA 60631 Appendix --- MOQ change table for Affected Products PackageType Material Description Old MOQ New MOQ TO -247 CLA50E1200HB Power Thyristor Discretes -SCR TO -247AD 30 300 TO -247 CLA100E1200HB Power Thyristor Discretes -SCR TO -247AD 30 300 TO -247 CS20 -16IO1… download now
2022_PCN-20220926.pdf September 26th, 202 2 8755 W. Higgins Road Suite 500 Chicago, Illinois USA 60631 Page 1 of 2 Advanced announcement FO -A Power Module Assembly and Test relocation To our valued customers, After the successful relocation of our TO -240 and Y4 product famil ies , I am pleased to annou nce that we are preparing to consolidate and transfer the next power module s back end operations to our new facilit y located in Lipa city, Philipines over the coming months. Th is Littelfuse facility combines the very best operational excellence and semiconductor expertise to deliver a highly automated, world class facility de signed, to meet IATF16949 & VDA6.3 requirements. Our clear focus being to bring high levels of service to our customers and quality products to support future growth of the power semiconductor business. This time , we will be relocating our FO -A power module s product families. Part numbers for this pacakge type are listed in the appendix . As a valued customer, we are providing… download now
2022_PCN-20220801.pdf August 1st, 202 2 8755 W. Higgins Road Suite 500 Chicago, Illinois USA 60631 Page 1 of 2 Advanced announcement Y1 Power Module Assembly and Test relocation To our valued customers, As informed already in 202 1 and after the successful relocation of our TO -240 and Y4 product famil ies , I am pleased to annou nce we are preparing to consolidate and transfer the next power module s back end operations to our new facilit y located in Lipa city, the Philipines over the coming months. Th is new Littelfuse facility combines the very best operational excellence and semiconductor expertise to deliver a highly automated, world class facility designed, to meet IATF16949 & VDA6.3 requirements. Our clear focus being to bring high levels of service to our customers and quality products to support future growth of the power semiconductor business. This time , we will be relocating our Y1 power module product families. Standard part numbers for each package are listed in the appendix . As a valued… download now
2022_PCN-20220726.pdf download now
2022_PCN-20220726-Dynex.pdf Registered in England and Wales: No 3824626 Registered Office: Doddington Road, Lincoln, LN6 3LF, UK Dynex Semiconductor Ltd Doddington Road | Lincoln United Kingdom | LN6 3LF Tel: +44 (0) 1522 500500 Fax: +44 (0) 1522 500660 www.dynexsemi.com 26 th July 2022 Ecomal UK Ltd 3 Sadler Rd, Lincoln LN6 3RG Attention: Mr J ames P owell Final Buy of Products Detailed in Attached List: DT74 - 100 - 375P / DT74 - 400 - 444 & DT74 - 250 Dynex Semiconductor Ltd. is committed to supplying leading edge technology products and promotes a continuous program of development in Power Semiconductor design a nd manufacture. As part of this program we review the continuing overall product strategy and viability of existing production items and from time to time find it necessary to cease manufacture of certain products. Accordingly, this letter is official not ification that the above noted products are to be withdrawn from production and we now invite you to place a last time buy with us. The re are 3 qty… download now
2022_PCN-20220628.pdf W eidmüller GmbH & Co. KGKlingenbergstraße 26D-32758 DetmoldT +49 (0) 52 31 14 28-0 F +49 (0) 52 31 14 28-1 16weidmueller@weidmueller.deF +49 (0) 52 31 14 28-116 Seite 1 von 1Detmold,28.06.2022Irina Steinkemper+49 (0) 52 31 14 28-256Irina.Steinkemper@weidmueller.comTKommanditgesellschaftSitz: DetmoldRegistergericht Lemgo HRA 4183USt-ID-Nr. DE124599901W EEE-Reg.-Nr. DE73937473Komplementärin: W eidmüller Führungs GmbH Sitz: DetmoldRegistergericht Lemgo HRB 5717Geschäftsführer: Dr. Timo BergerDr. Christian von TollBankverbindungen:Commerzbank AGIBAN: DE03 4808 0020 0283 2884 00BIC: DRESDEFF480Deutsche BankIBAN: DE73 47670023 0437 4922 00BIC: DEUTDE3B476Postgiro HannoverIBAN: DE94 2501 0030 0088 9443 01BIC: PBNKDEFFXXXTechnische ModifikationSehr geehrte Damen und Herren,ECOMAL Europe GmbHEinkauf ElektrotechnikWilhelm-Schauenberg-Straße 779199 KirchzartenKd.-Nr. 0000043547als innovatives Unternehmen streben wir ständig nach Verbesserungen und suchen nach W egen, unsere Produkte für Sie… download now
2022_PCN-20220620.pdf 8755 W. Higgins Road Suite 500 Chicago, Illinois USA 60631 June 20 th, 2022 Notification of Marking /Label Change with SAP Go -alive for Power Discrete Products To whom it may concern, This is a notification letter to state that Littelfuse will change the Marking and Label format for some of our Power Discrete Products after SAP Go- alive. Detail change as below: There will be no change on product fit, form, function, and no change to MPQ/Packing Mode. We value your business and look forward to assisting you whenever possible. Thank you! Sincerely and Best Regards, Zhiwei Wang Zhiwei Wang Product Marketing Manager Thyristor and Rectifier Diode Semiconductor Business Unit +86 510 85277701 - 79 27 zwang@littelfuse.com Affected Product List CLB30I1200PZ -TRL CS22 -12IO1M CS30 -16IO1 CS45 -16IO1 DHG10I1800PA DPG10I400PM DPG15I300PA IXA4I1200UC -TRL CLA100E1200HB CLA100E1200KB CLA100E1200TZ -TUB CLA30E1200HB CLA30E1200NPZ -TRL CLA30E1200PB CLA30E1200PC -TRL CLA40E1200NPZ -TUB CLA40MT1200NPB… download now
2022_PCN-20220607.pdf W eidmüller GmbH & Co. KGKlingenbergstraße 26D-32758 DetmoldT +49 (0) 52 31 14 28-0 F +49 (0) 52 31 14 28-1 16weidmueller@weidmueller.deF +49 (0) 52 31 14 28-116 Seite 1 von 1Detmold,07.06.2022Irina Steinkemper+49 (0) 52 31 14 28-256Irina.Steinkemper@weidmueller.comTKommanditgesellschaftSitz: DetmoldRegistergericht Lemgo HRA 4183USt-ID-Nr. DE124599901W EEE-Reg.-Nr. DE73937473Komplementärin: W eidmüller Führungs GmbH Sitz: DetmoldRegistergericht Lemgo HRB 5717Geschäftsführer: Dr. Timo BergerDr. Christian von TollBankverbindungen:Commerzbank AGIBAN: DE03 4808 0020 0283 2884 00BIC: DRESDEFF480Deutsche BankIBAN: DE73 47670023 0437 4922 00BIC: DEUTDE3B476Postgiro HannoverIBAN: DE94 2501 0030 0088 9443 01BIC: PBNKDEFFXXXTechnische ModifikationSehr geehrte Damen und Herren,ECOMAL Europe GmbHEinkauf ElektrotechnikWilhelm-Schauenberg-Straße 779199 KirchzartenKd.-Nr. 0000043547als innovatives Unternehmen streben wir ständig nach Verbesserungen und suchen nach W egen, unsere Produkte für Sie… download now
2022_PCN-20220601.pdf 立隆電子工業股份有限公司 Lelon Electronics Corp. 台灣 台中市 大里區 國光路一段 147 號 147, Sec. 1, Guoguang Rd., Dali District, Taichung, Taiwan Tel: +886 -4-2418 -1856 Fax: +886 -4-2418 -1906 E-mail: service@lelon.com www.lelon.com To: the respected W -wide Clients & Distributors., EOL Announcement for 85d C Radial DIP type E -Caps (2022 -06 -01, Taipei, Taiwan) Owing to the reasons of the followings: 1. 85d C E -Caps Demands from Marketing for over x 40 months tracing, concluded as Less 1% of our Overall Q’ty produced 2. All the Parts can be easily repl aced by SMD (V -Chip) or MLCC as well 3. In the worst case, the Alternative is stand -by : that is our 105d C Type is availab le 4. All Parameters & Size are the same, EVEN The Se lling Price , too. Except the TC ’s is much better as 105dC instead of 85dC - THE REFORE - 85dC on supply & running type to be EOL for Replaced by 105dC type REA RGA RLA (w/low LC ) RA (w/low LC) EOL Plan will be scheduled on below : aa. the Last buy Order…………………… … before end of… download now
2022_PCN-20220530.pdf download now
2022_PCN-20220510.pdf download now
2022_PCN-20220506.pdf W eidmüller GmbH & Co. KGKlingenbergstraße 26 D-32758 DetmoldT +49 (0) 52 31 14 28-0 F +49 (0) 52 31 14 28-1 16weidmueller@weidmueller.deF +49 (0) 52 31 14 28-116 Seite 1 von 1Detmold,06.05.2022Irina Steinkemper+49 (0) 52 31 14 28-256Irina.Steinkemper@weidmueller.comTKommanditgesellschaftSitz: DetmoldRegistergericht Lemgo HRA 4183USt-ID-Nr. DE124599901W EEE-Reg.-Nr. DE73937473Komplementärin: W eidmüller Führungs GmbH Sitz: DetmoldRegistergericht Lemgo HRB 5717Geschäftsführer: Dr. Timo BergerDr. Christian von TollBankverbindungen:Commerzbank AGIBAN: DE03 4808 0020 0283 2884 00BIC: DRESDEFF480Deutsche BankIBAN: DE73 47670023 0437 4922 00BIC: DEUTDE3B476Postgiro HannoverIBAN: DE94 2501 0030 0088 9443 01BIC: PBNKDEFFXXXProduct phase-out announcementECOMAL Europe GmbHEinkauf ElektrotechnikWilhelm-Schauenberg-Straße 779199 KirchzartenKd.-Nr. 0000043547Dear Sir or Madam,Weidmüller stands for powerful connections! However, in a process of continuous advancement, it is inevitable that renowned… download now
2022_PCN-20220415.pdf 序 额定电 额定转速 工作 绝缘 号 压(V(r/min) 制 等级 1 4C-115HB 115 50/60 18/16 3.6/3.2 2650/3000 S1 B 2 4C-115HS 115 50/60 18/16 3.6/3.2 2650/3000 S1 B 3 4C-115MB 115 50/60 11/10 2.2/2.0 2350/2400 S1 B 4 4C-115MS 115 50/60 11/10 2.2/2.0 2350/2400 S1 B 5 4C-115LB 115 50/60 10/9 2.0/1.8 1800/1900 S1 B 6 4C-115LS 115 50/60 10/9 2.0/1.8 1800/1900 S1 B 7 4C-230HB 230 50/60 22/19 4.4/3.8 2650/3000 S1 B 8 4C-230HS 230 50/60 22/19 4.4/3.8 2650/3000 S1 B 9 4C-230MB 230 50/60 11/10 2.2/2.0 2350/2400 S1 B 10 4C-230MS 230 50/60 11/10 2.2/2.0 2350/2400 S1 B 11 4C-230LB 230 50/60 10/9 2.0/1.8 1800/1900 S1 B 12 4C-230LS 230 50/60 10/9 2.0/1.8 1800/1900 S1 B 13 4C-115HB VA 115 50/60 18/16 3.6/3.2 2500/2800 S1 B 14 4C-115HS VA 115 50/60 18/16 3.6/3.2 2500/2800 S1 B 15 4C-115MB VA 115 50/60 11/10 2.2/2.0 2500/2600 S1 B 16 4C-115MS VA 115 50/60 11/10 2.2/2.0 2500/2600 S1 B 17 4C-115LB VA 115 50/60 10/9 2.0/1.8 1800/1900 S1 B 18 4C-115LS VA 115 50/60 10/9 2.0/1.8 1800/1900 S1 B 19 4C-230HB VA 230 50/60 22/19 4.4/3.8… download now
2022_PCN-20220407.pdf 1 Hönninger Rebecca Von: Merchel, Christian <Christian.Merchel@weidmueller.com> im Auftrag von Grosshandel (WD) <grosshandel@weidmueller.com> Gesendet: Donnerstag, 7. April 2022 17:57 Betreff: Weidmüller: Produktabkündigung mit Alternative / Product discontinuation with replacement Anlagen: Change_in_masterdata_Weidmueller_P-Z-Series.xlsx English version below. Sehr geehrte Damen und Herren, mit der angehängten Excel-Datei informieren wir Sie heute über Änderungen unserer Artikelstammdaten im Bereich der Reihenklemmen. Nach kontinuierlicher Weiterentwicklung der PUSH IN Technologie, möchten wir Sie nun bei der Umstellung der bisherigen P- und Z-Insta Reihe auf die Reihenklemmen der innovativen A-Reihe begleiten. Am 31.12.2022 werden die Artikelnummern aus Spalte A abgekündigt und weitestgehend durch Alternativen abgelöst (Ab Spalte D, teilweise zweite Alternative ab Spalte X). Wir bitten Sie diese Änderung in Ihren Weidmüller Materialstamm zu übernehmen und kaufende Kunden aktiv auf… download now
2022_PCN-20220322.pdf W eidmüller GmbH & Co. KGKlingenbergstraße 26 D-32758 DetmoldT +49 (0) 52 31 14 28-0 F +49 (0) 52 31 14 28-1 16weidmueller@weidmueller.deF +49 (0) 52 31 14 28-116 Seite 1 von 1Detmold,22.03.2022Irina Steinkemper+49 (0) 52 31 14 28-256Irina.Steinkemper@weidmueller.comTKommanditgesellschaftSitz: DetmoldRegistergericht Lemgo HRA 4183USt-ID-Nr. DE124599901W EEE-Reg.-Nr. DE73937473Komplementärin: W eidmüller Führungs GmbH Sitz: DetmoldRegistergericht Lemgo HRB 5717Geschäftsführer: Dr. Timo BergerDr. Christian von TollBankverbindungen:Commerzbank AGIBAN: DE03 4808 0020 0283 2884 00BIC: DRESDEFF480Deutsche BankIBAN: DE73 47670023 0437 4922 00BIC: DEUTDE3B476Postgiro HannoverIBAN: DE94 2501 0030 0088 9443 01BIC: PBNKDEFFXXXProduktabkündigung mit AlternativeECOMAL Europe GmbHEinkauf ElektrotechnikWilhelm-Schauenberg-Straße 779199 KirchzartenKd.-Nr. 0000043547Sehr geehrte Damen und Herren,Weidmüller steht für leistungsfähige Verbindungen! In einem Prozess ständiger Weiterentwicklung bleibt es… download now
2022_PCN-20220321.pdf W eidmüller GmbH & Co. KGKlingenbergstraße 26 D-32758 DetmoldT +49 (0) 52 31 14 28-0 F +49 (0) 52 31 14 28-1 16weidmueller@weidmueller.deF +49 (0) 52 31 14 28-116 Seite 1 von 1Detmold,21.03.2022Irina Steinkemper+49 (0) 52 31 14 28-256Irina.Steinkemper@weidmueller.comTKommanditgesellschaftSitz: DetmoldRegistergericht Lemgo HRA 4183USt-ID-Nr. DE124599901W EEE-Reg.-Nr. DE73937473Komplementärin: W eidmüller Führungs GmbH Sitz: DetmoldRegistergericht Lemgo HRB 5717Geschäftsführer: Dr. Timo BergerDr. Christian von TollBankverbindungen:Commerzbank AGIBAN: DE03 4808 0020 0283 2884 00BIC: DRESDEFF480Deutsche BankIBAN: DE73 47670023 0437 4922 00BIC: DEUTDE3B476Postgiro HannoverIBAN: DE94 2501 0030 0088 9443 01BIC: PBNKDEFFXXXProduktabkündigung mit AlternativeECOMAL Europe GmbHEinkauf ElektrotechnikWilhelm-Schauenberg-Straße 779199 KirchzartenKd.-Nr. 0000043547Sehr geehrte Damen und Herren,Weidmüller steht für leistungsfähige Verbindungen! In einem Prozess ständiger Weiterentwicklung bleibt es… download now
2022_PCN-20220111.pdf download now
2022_PCN-220701.pdf VTC-AER-004-A Product / Process Change Notice (PCN) PCN #: 220701 Issue Date: 2022-07-15 Product Affected: TO-220 Power Resistor– TR30 & TR50-H Effective Date: 2022-10-01 █ Product Mark □ Date Code □ Packaging □ Others Contact: All Customers Attachment: □ Yes █ No DESCRIPTION AND PURPOSE OF CHANGE: In response to the need for production expansion, w hile developing and designing the mold, the appearance is different from the original one, but it does not affect the product performance at all. The benefit is that the production capacity of this molding station is increased by 50%, and the molding time is shortened by 2 times. Therefore, th ere will be two styles (original - without holes, new items - with holes) coexisting. We hereby announce the change will be effective on October 1st, 2022. And we’ll regard as your acceptance if no response to this PCN within the notice period We hereby announce that the change will be effectiv e on 2022/10/01. Please sign back the PCN with your… download now
2022_PCN-220303.pdf Product / Process Change Notice (PCN) PCN #: 220303 Issue Date: 2022-03-16 Product Affected: Wire Wound Chip Inductor(Ferrite) – NL10,NL10(C),NL12,NL12(C) Series Effective Date: 2022-09-15 □ Product Mark □ Date Code □ Packaging █ Others Contact: All Customers Attachment: █ Yes □ No DESCRIPTION AND PURPOSE OF CHANGE: We will change the glue supplier of Wire Wound Chip Inductor (Ferrite) – NL10,NL10(C),NL12,NL12(C) Series, because the glue before change contains halogen, so we change the old one to another glue that does not contain halogen to meet the requirements of environmental. We hereby announce the change will be effective on Sep 15th, 2022. And we’ll regard as your acceptance if no response to this PCN within the notice period. DETAIL OF CHANGE: Before Change After Change Supplier WELLS SANTONG Material Contain Halogen Halogen Free RELIABILITY / QUALIFICATION SUMMARY: The attachment is the Pull test comparison report b efore and after the material change. All quality will also… download now
2022_PCN-128_2022_0-OMTB2229102.pdf PCN -128_2022_0 -OM TB22 29102 Page 1/7 Product Change Notification Beijing , 16th Dec ember 202 2 PCN -1 28_20 2 2_0 -OMT B22 2 9102 Second source s transistors HAT; HTR; HAX; HOP; HAC series Based on the JEDEC Standard JESD46 standard (latest release) , please kindly provide your approval for below change within 30 days. Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on HAT; HTR; HAX; HOP; HAC series . Concerned product s: HAT 1000 -S; HAT 1000 -S/SP1; HAT 1000 -S/SP200; HAT 1000 -S/SP23; HAT 1000 -S/SP24; HAT 1200 -S; HAT 1200 -S/SP1; HAT 1200 -S/SP200; HAT 1500 -S; HAT 1500 -S/SP1; HAT 1500 -S/SP100; HAT 1500 -S/SP200; HAT 1500 -S/SP23; HAT 1500 -S/SP24; HAT 200 -S; HAT 200 -S/SP1; HAT 400 -S; HAT 400 -S/SP1; HAT 500 -S; HAT 500 -S/SP1; HAT 500 -S/SP24; HAT 600 -S; HAT 600 -S/SP1;… download now
2022_PCN-094_2022_0-OMTS2223801+S2223802+S2223803+S2223804+S2223805.pdf PCN-094_2022_0 -OM TS2223801+S2223802+S2223803+S2223804+S2223805 Page 1/6 Product Change Notification Geneva, 30 th September 202 2 PCN -094_2022_0-OMT S2223801+S2223802+S2223803 +S2223804+S2223805 Varnish change on final Magnetic circuit 0165#; HAFS; HAIS; HASS; HTFS series Based on the JEDEC Standard JESD46 standard (latest release), please kindly provide your approval for below change within 30 days. Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on 0165#; HAFS; HAIS; HASS; HTFS series . Concerned product s: All 0165# models All HAFS models All HAIS models All HASS models All HTFS models PCN-094_2022_0 -OM TS2223801+S2223802+S2223803+S2223804+S2223805 Page 2/6 Chan ge: Description of the technical change : Varnish change on the final complete Magnetic circuit (impregnation).… download now
2022_PCN-064_2020_1-OMTS2029702.pdf PCN-064_2020_1 -OMTS2029702 Page 1/3 Product Change Notification Sofi a, 18 th July 20 22 PCN-0 64_20 20_1-OMT S2029702 New supplier and material for customized terminals LV100 and LV100xx series – First date code Based on the JEDEC JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on L V100 and LV100xx series . Concerned products : LA 10- I/SP8; LA 100- I/SP11; LV 100; LV 100/SP17; LV 100/SP25; LV 100/SP38; LV 100/SP41; LV 100/SP47; LV 100/SP48; LV 100/SP51; LV 100/SP58; LV 100/SP59; LV 100/SP60; LV 100/SP66; LV 100/SP67; LV 100/SP69; LV 100/SP71; LV 100/SP72; LV 100/SP77; LV 100/SP79; LV 100/SP80; LV 100/SP81; LV 100/SP82; LV 100 -100; LV 100 -1000; LV 100- 1000/SP13; LV 100-1000/SP16; LV 100- 1000/SP17; LV 100 -1000/SP2; LV 100-1000/SP20; LV 100-… download now
2022_PCN-062_2022_0-OMTB2217102.pdf PCN-062_2022_0- OMTB2217102 Page 1/6 Product Change Notification Beijing, 04 th August 202 2 PCN-0 62_20 22_0-OMT B2217102 Some data corrections in datasheets Some CASR- NP and CKSR-NP models Based on the JEDEC Standard JESD46 standard (latest release), please kindly provide your approval for below change within 30 days. Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on some CASR- NP and CKSR -NP models . Concerned products : CASR 15 -NP/SP3; CKSR 15 -NP; CKSR 25 -NP; CKSR 50 -NP; CKSR 50 -NP/SP1; CKSR 6 -NP; Chan ge: Description of the technical change : Some data corrections in datasheets for "Peak -peak output ripple at f = 450 kHz" and for "Uc" value in UL 508 Ratings and assumptions of certification section. PCN-062_2022_0- OMTB2217102 Page 2/6 For CASR 15 -NP/SP3: Before:… download now
2022_PCN-057_2022_0-OMTM2214301.pdf PCN-057_2022_0 -OM TM2214301 Page 1/5 Product Change Notification Machida, 26 th Ju ly 202 2 PCN -057_2022_0-OMT M2214301 TVS diode alternative HAR series Based on the JEDEC Standard JESD46 standard (latest release), please kindly provide your approval for below change within 30 days. Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort t o improve the quality of its products, LEM intends to proceed to some modification on HAR series . Concerned product s: HAR 1000 -S; HAR 500 -S/SP1; Chan ge: Description of the technical change : Second source for TVS diode (ESD and surge protection parts)(Transient Voltage Suppress or diode). Current one: PANJIT 1.5SMCJ18CA -AU Second source one: Diotec 1.5SMCJ18CA -AQ No change on the PCB layout. Dat a sheets of the current and second source diodes are enclosed in annex files. Comparison between current and second source diodes is… download now
2022_PCN-055_2022_0-OMTB2218701.pdf download now
2022_PCN-048_2022_0-OMTB2215804.pdf PCN-048_2022_0- OMTB2215804 Page 1/6 Product Change Notification Beijing, 15 th Ju ly 2022 PCN-0 48_20 22_0-OMT B2215804 Case plastic material and supplier change HAT series Based on the JEDEC Standard JESD46 standard (latest release), please kindly provide your approval for below change within 30 days. Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on HAT series . Concerned products : HAT 1000- S; HAT 1000- S/SP1; HAT 100 0-S/SP23 ; HAT 1000- S/SP24; HAT 1000- S/SP200; HAT 1092- S/SP6; HAT 1092- T/SP17; HAT 1200- S; HAT 1200- S/SP1; HAT 1456- S/SP6; HAT 1456- T/SP17; HAT 1500- S; HAT 1500- S/SP1; HAT 1500- S/SP23; HAT 1500- S/SP24; HAT 1500- S/SP100; HAT 163- S/SP6; HAT 163 -T/SP17; HAT 200- S; HAT 200-S/SP1; HAT 2184- S/SP6; HAT 2184- T/SP17; HAT 233- S/SP6; HAT 233 -T/SP17; HAT 320-… download now
2022_PCN-044_2022_0-OMTB2209701.pdf PCN-044_2022_0- OMTB2209701 Page 1/7 Product Change Notification Beijing, 30 th June 2022 PCN-0 44_20 22_0-OMT B2209701 Magnetic core/Second manufacturing site for same supplier HOxx-P-; HOxx -S-; HOxx-SW-; HOxx-PW- series Based on the JEDEC Standard JESD46 standard (latest release), please kindly provide your approval for below change within 30 days. Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on HOxx-P-; HOxx- S-; HOxx- SW-; HOxx- PW- series . Concerned products : HO 60- P-0100; HO 60- P/SP33-1106; HO 100- P-0100; HO 100- P/SP33-1106; HO 120- P-0100; HO 125- P/SPH00-0100; HO 150- P-0100; HO 180- P-0100; HO 180- P/SPH00-0100; HO 180- P/SP33-1106; HO 240- P-0100; HO 250- P-0100; HO 250- P/SP606-1106; HO 77- P/SPH00 -0100; HO 93- P/SPH00-0100; HO 116- P/SPH00-0100; HO 154-… download now
2022_PCN-043_2022_1-OMTB2214302.pdf PCN-043_2022_1 -OM TB2214302 Page 1/5 Product Change Notification Beijing, 19 TH October 2022 PCN-0 43_20 22_1-OMT B2214302 Secondary plastic coil former design optimization LA25NP; LA35NP, LV25; LV25xx series Date code Based on the JEDEC Standard JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on LA25NP; LA35NP, LV25; LV25xx series. Concerned products : LA 25- NP; LA 25- NP/SP11; LA 25-NP/SP13; LA 25-NP/SP14; LA 25- NP/SP22; LA 25- NP/SP25; LA 25- NP/SP32; LA 25- NP/SP34 ; LA 25- NP/SP38; LA 25-NP/SP39; LA 25- NP/SP43; LA 25- NP/SP7; LA 25- NP/SP8; LA 25-NP/SP9; LA 35- NP; LA 35 -NP/SP3; LV 25 -P; LV 25 -P/SP10; LV 25-P/SP11; LV 25 -P/SP12; LV 25-P/SP15; LV 25-P/SP17; LV 25 -P/SP3; LV 25-P/SP5; LV 25 -P/SP6; LV 25 -P/SP7; LV 25 -P/SP8; LV 25 -1000; LV… download now
2022_PCN-043_2022_0-OMTB2214302.pdf PCN-043_2022_0- OMTB2214302 Page 1/7 Product Change Notification Beijing, 14 th June 2022 PCN-0 43_20 22_0-OMT B2214302 Secondary plastic coil former design optimization LA25NP; LA35NP, LV25; LV25xx series Based on the JEDEC Standard JESD46 standard (latest release), please kindly provide your approval for below change within 30 days. Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on LA25NP; LA35NP, LV25; LV25xx series. Concerned products : LA 25- NP; LA 25- NP/SP11; LA 25-NP/SP13; LA 25-NP/SP14; LA 25- NP/SP22; LA 25- NP/SP25; LA 25- NP/SP32; LA 25-NP/SP34; LA 25-NP/SP38; LA 25-NP/SP39; LA 25- NP/SP43; LA 25- NP/SP7; LA 25-NP/SP8; LA 25-NP/SP9; LA 35- NP; LA 35- NP/SP3; LV 25 -P; LV 25 -P/SP10; LV 25-P/SP11; LV 25-P/SP12; LV 25-P/SP15; LV 25 -P/SP17; LV 25 -P/SP3; LV 25-P/SP5; LV… download now
2022_PCN-038_2022_0-OMTS2209601.pdf PCN-038_2022_0- OMTS2209601 Page 1/5 Product Change Notification Sofia, 23 rd May 2022 PCN-038 _2022_0-OMT S2209601 New supplier and tools for plastics parts and primary pins HXS series Based on the JEDEC Standard JESD46 standard (latest release), please kindly provide your approval for below change within 30 days. Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on HXS series . Concerned products : HXS 10 -NP/SP3; HXS 10 -NP/SP4; HXS 20 -NP; HXS 20 -NP/SP30; HXS 20 -NP/SP7 ; HXS 50 -NP; HXS 50 -NP/SP6; Chan ge: Description of the technical change : New supplier and tools for plastics parts (case and cover) and primary pins. Materials for plastic parts and primary pins will stay the same as before, no materials change, supplier change. Dimensions for plastic parts and primary pins will… download now
2022_PCN-032_2022_1-OMTS2208901.pdf PCN-032_2022_1 -OM TS2208901 Page 1/3 Product Change Notification Sofia , 16 th September 2022 PCN-0 32_20 22_1-OMT S2208901 Connection process change from crimp to solder joint ART series – First date code Based on the JEDEC Standard JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on ART series . Concerned products : All ART models we confirm you that LEM is now producing the model ART -B22- D70/SP40 according to the change explained on the next page, and from the date code 822258. Explanation on the date code: “8 ” means the production center, here LEM in Sofia (Bulgaria) “22” means the year of the production, here the year 2022 “258” means the day of the production, here the 258 th day of the year 202 2 ( 1 5 th September 2022) PCN-032_2022_1-… download now
2022_PCN-032_2022_0-OMTS2208901.pdf PCN-032_2022_0- OMTS2208901 Page 1/2 Product Change Notification Sofia , 03 rd May 2022 PCN-0 32_20 22_0-OMT S2208901 Connection process change from crimp to solder joint ART series Based on the JEDEC Standard JESD46 standard (latest release), please kindly provide your approval for below change within 30 days. Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on ART series . Concerned products : All ART mo dels Chan ge: Description of the technical change : Process change for the connection of the both cables, from clamp to soldering process. Reason of the technical change : Material FERRULE CLAMP is becoming obsolete. PCN-032_2022_0- OMTS2208901 Page 2/2 Replacement of the clamp by solder joint as represented here below: Impact on the product: On the form: NO On the fit: NO On the… download now
2022_PCN-026_2022_1-OMTB2132201.pdf PCN-026_2022_1 -OM TB2132201 Page 1/4 Product Change Notification Beijing, 26 th July 2022 PCN-0 26_20 22_1-OMT B2132201 Case plastic material and supplier change HAX series Additional change: laser marking color from black to white + first date code (see in red) Based on the JEDEC Standard JESD46 standard (latest release), please kindly provide your approval for below change within 30 days. Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on HAX series . Concerned products : HAX 1000 -S; HAX 1000- S/SP11; HAX 1000- S/SP13; HAX 1000 -S/SP18; HAX 1000- S/SP20; HAX 1200-S; HAX 1200- S/SP18; HAX 1200- S/SP21; HAX 1500 -S; HAX 1500 -S/SP11; HAX 1500- S/SP18; HAX 1500 -S/SP20; HAX 2000 -S; HAX 2000- S/SP18; HAX 2000- S/SP19; HAX 2000 -S/SP20; HAX 2000- S/SP21; HAX 2500 -S; HAX 2500- S/SP18;… download now
2022_PCN-026_2022_0-OMTB2132201.pdf PCN-026_2022_0- OMTB2132201 Page 1/6 Product Change Notification Beijing, 07 th April 2022 PCN-0 26_20 22_0-OMT B2132201 Case plastic material and supplier change HAX series Based on the JEDEC Standard JESD46 standard (latest release), please kindly provide your approval for below change within 30 days. Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on HAX series . Concerned products : HAX 1000 -S; HAX 1000- S/SP11; HAX 1000- S/SP13; HAX 1000 -S/SP18; HAX 1000- S/SP20; HAX 1200 -S; HAX 1200- S/SP18; HAX 1200- S/SP21; HAX 1500 -S; HAX 1500 -S/SP11; HAX 1500- S/SP18; HAX 1500 -S/SP20; HAX 2000 -S; HAX 2000- S/SP18; HAX 2000- S/SP19; HAX 2000 -S/SP20; HAX 2000- S/SP21; HAX 2500 -S; HAX 2500- S/SP18; HAX 2500- S/SP20; HAX 3000 -S; HAX 3000- S/SP20; HAX 3000- S/SP22; HAX 4000 -S; HAX 5000… download now
2022_PCN-019_2021_1-OMTB2023001.pdf PCN-019_2021_1 -OMTB2023001 Page 1/3 Product Change Notification Beijing, 30 th June 2022 PCN-0 19_20 21_1-OMT B2023001 Some dimensions corrections on data sheets LA25NP, LA35NP, LV20 and LV25 series Dates of modifications (see o n page 2) Based on the JEDEC JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on LA25NP , LA35NP , LV20 and LV25 series. Concerned products : LA 25- NP; LA 25- NP/SP11; LA 25 -NP/SP13; LA 25- NP/SP14; LA 25- NP/SP22; LA 25-NP/SP25; LA 25- NP/SP32; LA 25-NP/SP34; LA 25- NP/SP38; LA 25-NP/SP39; LA 25- NP/SP43; LA 25- NP/SP7; LA 25- NP/SP8; LA 25-NP/SP9; LA 35- NP; LA 35- NP/SP3; LV 20 -P; LV 25 -P; LV 25 -P/SP10; LV 25 -P/SP11; LV 25 -P/SP12; LV 25 -P/SP15; LV 25 -P/SP3; LV 25 -P/SP5; LV 25 -P/SP6; LV 25 -P/SP7; LV 25 -P/SP8;… download now
2022_PCN-010_2020_1-OMTS1933901.pdf PCN-010_2020_1 -OMTS1933901 Page 1/3 Product Change Notification Sofia , 16 th December 20 22 PCN-0 10_20 20_1-OMT S193390 1 PCBA & PCB suppliers + PCB material change LV100 and LV100xx series – First date codes Based on the JEDEC JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on LV100 and LV100xx series. Concerned products : LV 100; LV 100/SP17; LV 100/SP25; LV 100/SP38; LV 100/SP41; LV 100/SP47; LV 100/SP48; LV 100/SP51; LV 100/SP58; LV 100/SP5 9; LV 100/SP60; LV 100/SP66; LV 100/SP67; LV 100/SP69; LV 100/SP71; LV 100/SP72; LV 100/SP77; LV 100/SP79; LV 100/SP 80; LV 100/SP81; LV 100/SP82; LV 100 -100; LV 100 -1000; LV 100- 1000/SP13; LV 100- 1000/SP16; LV 100-1000/SP17; LV 100 -1000/SP2; LV 100- 1000/SP20; LV 100 -1000/SP22; LV 100 -1000/SP23; LV 100-… download now
2022_PCN-009_2022_1-OMTB2201202.pdf PCN-009_2022 _1-OMT B2201202 Page 1/3 Product Change Notification Beijing, 17 th May 202 2 PCN-0 09_20 22_1-OMT B2201202 Soldering process change LA25NP , LV20 , LV25 and LV25xx series Firs t date code Based on the JEDEC Standard JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on LA25NP, LV20, LV25 and LV25xx series. Concerned products : LA 25- NP; LA 25 -NP/SP11; LA 25-NP/SP13; LA 25-NP/SP14; LA 25- NP/SP22; LA 25- NP/SP25; LA 25- NP/SP32; LA 25-NP/SP34; LA 25-NP/SP38; LA 25- NP/SP39; LA 25-NP/SP43; LA 25- NP/SP7; LA 25- NP/SP8; LA 25- NP/SP9; LV 20 -P; LV 25 -P; LV 25 -P/SP10; LV 25-P/SP11; LV 25-P/SP12; LV 25-P/SP15; LV 25-P/SP17; LV 25 -P/SP3; LV 25-P/SP5; LV 25-P/SP6; LV 25 -P/SP7; LV 25-P/SP8; LV 25 -1000; LV 25-1000/SP1; LV 25-1000/SP2; LV 25… download now
2022_PCN-009_2022_0-OMTB2201202.pdf PCN -009_202 2_0-OMT B2201202 Page 1/2 Product Change Notification Beijing , 25 th January 202 2 PCN -0 09_20 2 2_0 -OMT B2 201202 Soldering process change LA25NP , LV20 , LV25 and LV25xx series Based on the JEDEC Standard JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on LA25NP, LV20, LV25 and LV25xx series . Concerned product s: LA 25 -NP; LA 25 -NP/SP11; LA 25 -NP/SP13; LA 25 -NP/SP14; LA 25 -NP/SP22; LA 25 -NP/SP25; LA 25 -NP/SP32; LA 25 -NP/SP34; LA 25 -NP/SP38; LA 25 -NP/SP39; LA 25 -NP/SP43; LA 25 -NP/SP7; LA 25 -NP/SP8; LA 25 -NP/SP9; LV 20 -P; LV 25 -P; LV 25 -P/SP10; LV 25 -P/SP11; LV 25 -P/SP12; LV 25 -P/SP15; LV 25 -P/SP17; LV 25 -P/SP3; LV 25 -P/SP5; LV 25 -P/SP6; LV 25 -P/SP7; LV 25 -P/SP8; LV 25 -1000; LV 25 -1000/SP1; LV 25 -1000/SP2; LV… download now
2022_PCN-005_2022_0-OMTB2131901.pdf PCN-005_2022 _0-OMT B2131901 Page 1/7 Product Change Notification Beijing, 12 th January 202 2 PCN-0 05_20 22_0-OMT B2131901 Plastic raw material and supplier change HOxx-S-; HOxx -P-; HOxx-SW-; HOxx-PW- series Based on the JEDEC Standard JESD46 standard (latest release) , please kindly provide your approval for below change within 30 days. Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on HOxx-S-; HOxx- P-; HOxx- SW-; HOxx- PW- series . Concerned products : HO 100- P-0100; HO 100- P/SP33-1106; HO 120- P-0100; HO 120- P/SP50-0100; HO 150- P-0100; HO 180- P-0100; HO 180- P/SP33-1106; HO 240- P-0100; HO 250- P-0100; HO 250- P/SP606- 1106; HO 260- P/SPH00 -0100; HO 60- P-0100; HO 60- P/SP33 -1106; HO 60- P/SP50 -0100; HO 116- P/SPH00 -0100; HO 125- P/SPH00 -0100; HO 154- P/SPH00 -0100; HO… download now
2022_Notification-Letter-202203.pdf Vishay Israel Ltd. Ramat Gabriel, P.O.B. 852, Migdal Ha’emek 10500, Israel , Phone (972) 4 -6447777, Fax (972) 4 -6441830, www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENTS March 2022 Subject: Approval of New Temperature Stable Ceramic Formulation (BP) Dear Valued Customer: As part of our commitment to continuously provide our customers with the highest world -class quality MLCC solutions and support, the Vishay MLCC division is pleased to inform you that it has improved the formulation used in its temperature stable dielectri cs (BP) for the CDR (MIL - PRF -55681) and M123 (MIL -PRF -123) product s. After building products, completing our qualification testing per the specifications and submitting the results to the Defense Logistics Agency (DLA) for review, the DLA has approv ed this change for the new dielectric formulation. Below are the approved DLA test reports . If you need further details on the test qualifications ,… download now
2022_IN-119_2022_0-OMTB2220305.pdf IN-119 _202 2_0 -OMT B2220305 Page 1/2 Information Note Beijing, 24 th November 202 2 IN -119 _202 2_0 -OMT B2220305 CE marking removal LV25xx series Based on the JEDEC Standard JESD46 standard (latest rel ease) Not for publication unless permission is granted by LEM Dear valued customer, To answer to continuous market requirement for impr oved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on LV25xx serie s. Concerned product s: LV 25 -1000 ; LV 25 -1000/SP1 ; LV 25 -1000/SP2 ; LV 25 -1000/SP3 ; LV 25 -1000/SP5 LV 25 -1200 ; LV 25 -1200/SP1 ; LV 25 -1200/SP5 ; LV 25 -1500/SP5 ; LV 25 -200 ; LV 25 -200/SP1 ; LV 25 -400 ; LV 25 -400/SP1 ; LV 25 -500/SP1 ; LV 25 -600 ; LV 25 -600/SP1 ; LV 25 -600/SP2 ; LV 25 -600/SP5 ; LV 25 -800 ; Chan ge: Description of the change : Marking change: CE marking removal on products /packaging and data sheets. Explanations as per the enclosed pdf file named “CE marking for LEM… download now
2022_IN-108_2022_0-OMTxxx.pdf IN-10 8_202 2_0 -OMT xxx Page 1/3 Information Note Geneva, 03 rd November 202 2 IN -10 8_202 2_0 -OMT xxx CE marking removal Automotive sensors series Based on the JEDEC Standard JESD46 standard (latest rel ease) Not for publication unless permission is granted by LEM Dear valued customer, To answer to continuous market requirement for impr oved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on Automotive sensors series . Concerned series: CAB500; CAB500S; CAB1500; CAB1500S; DHAB V2 ; HAB; HABT; HAH1BV; HAH1BVW; HAH1DRW; HAH2DR; HAH3DR; HAH3DRCH; HAH6DRSY ; HAM; HC5FW; HSBBV; HSNBV; HSNDR; HSW Sxx; SSVT ; IN-10 8_202 2_0 -OMT xxx Page 2/3 Chan ge: Description of the change : Marking change: CE marking removal on products/pack aging and data sheets. PS: For some of these series the opportunity will b e taken to update the LEM logo to the latest one (HAM, HAH3DR S00, S02, S0E, S03, S06, S0D, DHAB, HA H2DR… download now
2022_IN-105_2022_0-OMTB2220306.pdf IN-10 5_202 2_0 -OMT B222030 6 Page 1/2 Information Note Beijing, 21 st Octo ber 202 2 IN -10 5_202 2_0 -OMT B222030 6 CE marking removal L A55 and LA100P series Based on the JEDEC Standard JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear valued customer, To answer to continuous market requirement for improved performances, and in a permanent ef fort to improve the quality of its products, LEM intends to proceed to some modification on L A55 and LA100P series . Concerned product s: LA 25 -P; LA 55 -P; LA 55 -P/SP1; LA 55 -P/SP11; LA 55 -P/SP2; LA 55 -P/SP21; LA 55 -P/SP23; LA 55 -P/SP26; LA 55 -P/SP50; LA 55-P/SP52; LA 55 -P/SP7; LA 55 -TP; LA 55 -TP/SP1; LA 55 -TP/SP27; LA 55 -TP/SP28; LA 55 -TP/SP9; LA 100 -P; LA 100 -P/SP13; LA 100 -P/SP4; LA 100 -P/SP50; LA 100-P/SP6; LA 100 -P/SP8; LA 100 -P/SP9; LA 100 -TP; LA 100 -TP/SP10; LA 100-TP/SP2; LA 100-TP/SP7; IN-10 5_202 2_0 -OMT B222030 6 Page 2/2 Chan ge: Description of the change :… download now
2022_IN-103_2022_0-OMTB2220303.pdf IN-103_202 2_0 -OMT B2220303 Page 1/2 Information Note Beijing, 20 th Octo ber 202 2 IN -103_202 2_0 -OMT B2220303 CE marking removal LA25NP and LA35NP series Based on the JEDEC Standard JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear valued customer, To answer to continuous market requirement for improved performances, and in a permanent ef fort to improve the quality of its products, LEM intends to proceed to some modification on LA25NP and LA35NP series . Concerned product s: LA 25 -NP; LA 25 -NP/SP11; LA 25-NP/SP13; LA 25 -NP/SP14; LA 25 -NP/SP22; LA 25-NP/SP25; LA 25 -NP/SP32; LA 25-NP/SP34 ; LA 25 -NP/SP38; LA 25-NP/SP39; LA 25 -NP/SP43; LA 25 -NP/SP7; LA 25-NP/SP8; LA 25-NP/SP9; LA 35 -NP; LA 35 -NP/S P3; Chan ge: Description of the change : Marking change: CE marking removal on products /packaging and data sheets. Explanations as per the enclosed pdf file named “CE mar king for LEM products_Industry LA25NP; LA35NP series”… download now
2022_IN-096_2022_0-OMTS2220309.pdf IN-096 _202 2_0 -OMT S222030 9 Page 1/3 Information Note Sofia, 03 rd Octo ber 202 2 IN -096 _202 2_0 -OMT S222030 9 CE marking removal HO and HO -P series Based on the JEDEC Standard JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear valued customer, To answer to continuous market requirement for improved performances, and in a permanent ef fort to improve the quality of its products, LEM intends to proceed to some modification on HO and HO -P series . Concerned product s: HO 11.5 -NP -0000; HO 11.9 -NP -0000; HO 15 -NP -0000; HO 15 -NP/SP33 -1000; HO 18.8 -NP -0000; HO 24.8 -NP -0000; HO 25 -NP -0000; HO 25 -NP/SP33 -1000; HO 25 -NPPR; HO 30 -NP/SPG13 -3205; HO 30 -NP/SPG14 -2004; HO 30 -NP/SPG15 -3205; HO 30 -NP/SPG16 -3105; HO 37.5 -NP/SPG13 -3205 ; HO 8 -NP -0000; HO 8 -NP/SP33 -1000; HO 12 -NP/SPH00 -0010; HO 14 -NP/SPH00 -0010; HO 16 -NP/SPH00 -0010; HO 21 -NP/SPH00 -0010; HO 23 -NP/SPH00 -0010; HO 24.9 -NP/SPH00 -0010; HO 25 -NP/SPH00… download now
2022_IN-087_2022_0-OMTB2220302.pdf IN-087 _202 2_0 -OMT B2220302 Page 1/2 Information Note Beijing, 26 th September 202 2 IN -087 _202 2_0 -OMT B2220302 CE marking removal CAS -NP , CASR -NP and CKSR -NP series Based on the JEDEC Standard JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear valued customer, To answer to continuous market requirement for improved performances, and in a permanent ef fort to improve the quality of its products, LEM intends to proceed to some modification s on CAS -NP , CASR -NP and CKSR -NP series . Concerned product s: CAS 15 -NP ; CAS 15 -NP/SP1 ; CAS 25 -NP ; CAS 25 -NP/SP1 ; CAS 50 -NP ; CAS 6 -NP ; CASR 15 -NP ; ; CASR 15 -NP/SP1 ; CASR 15 -NP/SP3 ; CASR 15 -NP/SP6 ; CASR 25 -NP ; CASR 25 -NP/SP1 ; CASR 25 -NP/SP3 ; CASR 25 -NP/SP6 ; CASR 50 -NP ; CASR 50 -NP/SP1 ; CASR 50 -NP/SP3 ; CASR 50 -NP/SP6 ; CASR 6 -NP; CASR 6 -NP/SP1; CASR 6 -NP/SP3; CASR 6 -NP/SP5; CASR 6 -NP/SP6; CKSR 15 -NP ; CKSR 25 -NP ; CKSR 25 -NP/SP3 ; CKSR 50 -NP ; CKSR 50… download now
2022_IN-080_2022_0-OMTS2220308.pdf IN-080_202 2_0 -OMT S2220308 Page 1/2 Information Note Sofia, 12 th September 202 2 IN -080_202 2_0 -OMTS 2220308 CE marking removal HTFS series Based on the JEDEC Standard JESD46 standard (latest release), please kindly provide your approval for below change within 30 days Not for publication unless permission is granted by LEM Dear valued customer, To answer to continuous market requirement for improved performances, and in a permanent ef fort to improve the quality of its products, LEM intends to proceed to some modifications on HTFS series . Concerned product s: HTFS 200 -P; HTFS 200 -P/SP2; HTFS 400 -P; HTFS 400 -P/SP2; HTFS 400 -P/SP5; HTFS 400 -P/SP6; HTFS 400 -P/SP7; HTFS 600 -P; HTFS 800 -P; HTFS 800 -P/SP2; HTFS 800 -P/SP3; HTFS 800 -P/SP5; HTFS 800 -P/SP6; Chan ge: Description of the change : Marking change: CE marking removal on products /packaging and data sheets. Explanations as per the enclosed pdf file named “CE mar king for LEM products_Industry HTFS series ”… download now
2022_IN-074_2022_0-OMTB2220307.pdf IN-074 _202 2_0 -OMT B222030 7 Page 1/2 Information Note Beijing, 06 th September 202 2 IN -074 _202 2_0 -OMT B222030 7 CE marking removal LA125 and LA200P series Based on the JEDEC Standard JESD46 standard (latest release), please kindly provide your approval for below change within 30 days Not for publication unless permission is granted by LEM Dear valued customer, To answer to continuous market requirement for improved performances, and in a permanent ef fort to improve the quality of its products, LEM intends to proceed to some modification s on LA125 and LA200P series . Concerned product s: LA 125 -P; LA 125 -P/SP1; LA 125 -P/SP16; LA 125 -P/SP3; LA 125 -P/SP4; LA 125 -P/SP7; LA 200 -P; LA 200 -P/SP10; LA 200 -P/SP12; LA 200 -P/SP14 ; LA 200 -P/SP3; LA 200 -P/SP4; Chan ge: Description of the change : Marking change: CE marking removal on products /packaging and data sheets. Explanations as per the enclosed pdf file named “CE mar king for LEM products_Industry LA125_LA200P… download now
2022_IN-071_2022_0-OMTS2220306.pdf IN-071 _202 2_0 -OMT S2220306 Page 1/2 Information Note Sofia, 24 th August 202 2 IN -071 _202 2_0 -OMT S2220306 CE marking removal HXS series Based on the JEDEC Standard JESD46 standard (latest release), please kindly provide your approval for below change within 30 days Not for publication unless permission is granted by LEM Dear valued customer, To answer to continuous market requirement for improved performances, and in a permanent ef fort to improve the quality of its products, LEM intends to proceed to some modifications on HXS series . Concerned product s: HXS 10 -NP/SP3; HXS 10 -NP/SP4; HXS 20 -NP; HXS 20 -NP/SP30; HXS 20 -NP/SP7; HXS 50 -NP; HXS 50 -NP/SP6; Chan ge: Description of the change : Marking change: CE marking removal on products and data sheets. Explanations as per the enclosed pdf file named “CE marking for L EM products_Industry IN version2” IN-071 _202 2_0 -OMT S2220306 Page 2/2 Reason of the change: To comply with CE marking regulation applied for… download now
2022_IN-064_2022_0-OMTB2216401.pdf IN-0 64_2022 _0-OMT B2216401 Page 1/3 Information Note Beijing, 05 th August 202 2 IN-064 _2022 _0-OMT B2216401 Extra capacity lines adding at supplier CAS -NP, CASR-NP and CKSR-NP series Based on the JEDEC Standard JESD46 standard (latest release), please kindly provide your approval for below change within 30 days Not for publication unless permission is granted by LEM Dear valued customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on CAS -NP, CASR -NP and CKSR- NP series. Concerned products : CAS 15 -NP; CAS 15 -NP/SP1; CAS 25 -NP; CAS 25 -NP/SP1; CAS 50 -NP; CAS 6 -NP; CASR 15 -NP; CASR 15 -NP/SP1; CASR 15 -NP/SP3; CASR 15 -NP/SP6; CASR 25 -NP; CASR 25 -NP/SP1; CASR 25 -NP/SP3; CASR 25 -NP/SP6; CASR 50 -NP; CASR 50 -NP/SP1; CASR 50 -NP/SP3; CASR 50 -NP/SP6; CASR 6 -NP; CASR 6 -NP/SP1; CASR 6 -NP/SP3; CASR 6 -NP/SP5; CASR 6 -NP/SP6; CKSR 15 -NP;… download now
2022_IN-059_2021_1-OMTB2126501.pdf IN-059_2021_1 -OMTB2126501 Page 1/4 Information Note Beijing, 24 th August 202 2 IN-059 _2021_ 1-OMT B2126501 New copy injection molds CAS -NP, CASR-NP and CKSR-NP series Date codes (see page 2) Based on the JEDEC Standard JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear valued customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on CAS-NP, CASR -NP and CKSR- NP series. Concerned products : CAS 6 -NP; CAS 15 -NP/SP1; CAS 50 -NP; CAS 15 -NP; CAS 25 -NP/SP1; CAS 25 -NP; CASR 15 -NP; CASR 15 -NP/SP1; CASR 15 -NP/SP3; CASR 15 -NP/SP6; CASR 25 -NP; CASR 25 -NP/SP1; CASR 25 -NP/SP3; CASR 25 -NP/SP6; CASR 50 -NP; CASR 50 -NP/SP1; CASR 50 -NP/SP3; CASR 50 -NP/SP6; CASR 6 -NP; CASR 6 -NP/SP1; CASR 6 -NP/SP3; CASR 6 -NP/SP5; CASR 6 -NP/SP6; CKSR 15 -NP; CKSR 25 -NP; CKSR 25 -NP/SP3; CKSR 50 -NP; CKSR 50 -NP/SP1; CKSR… download now
2022_EOL-020_2022_0.pdf EOL-0 20_2022 Page 1/1 End of Life Notification (EOL) Geneva, 31 st October 2022 EOL -020_202 2_0 Diverse models Not for publication unless permission is granted by LEM To our Valued Customers and Partners, As part of our continued focus toward providing our customers and partners the highest level of service, quality and security, LEM International announces the End of Life (“EOL”) of the below mentioned current transducer s on 30 th September 2023 This is concerning the following model s: HAC 50 -S/SP55 HAL 600- S/SP7 HAR 500 -S/SP1 HAS 200 -S/SP52 HAS 300 -S/SP52 HAS 400 -S/SP55 HAZ 6000- SRI/SP1 HO 100- P/SP33-1106 HO 60- P/SP33 -1106 HOYL 800 -S/SP33 -1106 HTA 1000- S/SP13 HTA 1000- S/SP18 LA 205- S/SP34 LA 205- S/SP9 LA 255- S/SP2 L F 1005- S/SP37 LF 1010- S/SP21 LF 305- S/SP3 LT 108- S7/SP11 LZSR 150 -TP/SP2 Deadline s: Last call orders: 30 th April 202 3. After this deadline, orders will be refused Obsolescence: 30 th September 2023 Sincerely yours, Stéphane ROLLIER Product… download now
2022_EOL-015_2022_0.pdf EOL-0 15_2022 Page 1/1 End of Life Notification (EOL) Geneva, 04 th October 2022 EOL -015_202 2_0 Diverse models Not for publication unless permission is granted by LEM To our Valued Customers and Partners, As part of our continued focus toward providing our customers and partners the highest level of service, quality and security, LEM International announces the End of Life (“EOL”) of the below mentioned current transducer s on 31 st Ma y 2023. This is concerning the following model s: CD 100 -S/SP1 CD 100 -S/SP4 CV 4 -300/SP1 LA 205- S/SP8 LA 255- S/SP4 LF 2000- S/SP4 LF 2000- S/SP5 LF 2000- S/SP8 LT 100- S/SP76 LT 100- S/SP79 LT 200- S/SP39 LT 200- T/SP3 LT 2000- T LT 300- S/SP43 LT 300- T/SP21 Deadline s: Last call orders: 31 st December 202 2. After this deadline, orders will be refused Obsolescence: 31 st M ay 2023 Reason: Few sales over the last years Sincerely yours, Stéphane ROLLIER - Product Manager download now
2022_EOL-012_2022_0.pdf EOL-0 12_2022 Page 1/1 End of Life Notification (EOL) Geneva, 29 th September 202 2 EOL -012_202 2_0 AKR 750 C420L J model Not for publication unless permission is granted by LEM To our Valued Customers and Partners, As part of our continued focus toward providing our customers and partners the highest level of service, quality and security, LEM International announces the End of Life (“EOL”) of the below mentioned current transducer from today . This is concerning the following model : AKR 750 C420L J; Reason: Component obsolescence Sincerely yours, Stéphane ROLLIER Product Manager download now
2022_Change of our product carrier tape.pdf download now
2022_APCN-SIL-5032022.pdf ADVISORY PRODUCT CHANGE NOTICE Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # Product Group: Vishay Siliconix/ April 18th, 20 22 - APCN -SIL -503202 2 Additional Wafer Processing for Vishay Siliconix 5x5 MLP DESCRIPTION OF CHANGE: Vishay Siliconix has expanded the wafer processing of mosfet wafers for some 5x5 Power Stages products to ProPowerTek in Taiwan (R.O.C.) . CLASSIFICATION OF CHANGE: Back End Wafer Processing location REASON FOR CHANGE: Additional Capacity . EXPECTED INFLUENCE ON PERFORMANCE/QUALITY/RELIABILTY : There will be no effect on performance, quality, or reliability. PRODUCT CATAGORY: ICs PART NUMBERS AFFECTED: VISHAY BRAND(s): Vishay -Siliconix TIME SCHEDULE: Immediately, April 18th, 2022… download now
2022_APCN-SIL-5012022.pdf ADVISORY PRODUCT CHANGE NOTICE Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ONE O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # Product Group: Vishay Siliconix/ February 25 th, 20 22 - APCN -SIL -501202 2 DG9411E Datasheet Changes DESCRIPTION OF CHANGE: On resistance test limit changes on the analog switch channel to better represents the product characteristics. There is no design, BOM, or manufacture process change. Switch max resistance limits at 4.5V, 2.2V and 1.8V V+ power conditions are updated as below: CLASSIFICATION OF CHANGE: Datasheet REASON FOR CHANGE: Updated limits more accurately present product resistance characteristics. EXPECTED INFLUENCE ON PERFORMANCE/QUALITY/RELIABILTY : There will be no effect on performance, quality, or reliability.… download now
2021_PTN-SIL-035-2021-Rev0.pdf Product Group: SIL/Fri Nov 12, 2021/PTN-SIL-035-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT End of Life Notification - SQP TO-220 Package DESCRIPTION OF CHANGE: These parts have been approved for termination. Production of the affected parts will be terminated per the time schedule in this notification and last time buy orders must be received within the specified timeframe. REASON FOR CHANGE: End of Life to TO-220 Package EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: None PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Siliconix TIME SCHEDULE: Last Time Buy Date: Fri Nov 18, 2022 Last Time Ship Date: Mon Nov 20, 2023 SAMPLE AVAILABILITY: There are no replacements parts available. This package is being… download now
2021_PTN-SIL-032-2021-Rev0.pdf Product Group: SIL/Tue Aug 24, 2021/PTN-SIL-032-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Conversion to Copper (Cu) Wire – SQ7415AEN DESCRIPTION OF CHANGE: The affected part number listed in this notification has been approved for termination. The new ordering code will be SQ7415CENW-T1_GE3 which offers a closely matched solution and provides some beneficial features compared to the SQ7415AEN- T1_GE3 / SQ7415AEN-T1_BE3. The SQ7415CENW-T1_GE3 offers a Copper wire material set and pins with wet-able flanks. This feature promotes improved solder coverage and solder filet shape at the lead tips. The outer most dimensions are unchanged and the same PCB land pattern is required. There will be no changes to the wafer fab or assembly locations. There will be no changes to the… download now
2021_PTN-SIL-030-2021-Rev0.pdf Product Group: SIL/Fri Aug 13, 2021/PTN-SIL-030-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Conversion to Copper (Cu) Wire – SQ7415AENW DESCRIPTION OF CHANGE: The affected part number listed in this notification will be converted to a Copper wire material set. The new ordering code will be SQ7415CENW-T1_GE3, which has the exact same product performance, fit and form as SQ7415AENW-T1_GE3. There will be no changes to the wafer fab or assembly locations. There will be no changes to the specification limits at final test or to the associated datasheet specifications with the exception of Rg where the maximum value has been tightened from 9 Ohms to 8.3 Ohms (reference: SQ7415AENW Doc #63050, Rev.B) - see included datasheet comparison for details. REASON FOR CHANGE: Standardization… download now
2021_PTN-SIL-020-2021-Rev0.pdf Product Group: SIL/Fri Jun 18, 2021/PTN-SIL-020-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Product Obsolescence - SQJ912AEP DESCRIPTION OF CHANGE: The affected part number listed in this notification has been approved for termination. The recommended replacement part is the SQJ912DEP-T1_GE3. This device offers a closely matched solution and an upgrade to our 530 SG N-Channel MOSFET technology from the same wafer fab and is assembled in the same facility as the SQJ912AEP-T1_GE3. REASON FOR CHANGE: Standardization of materials EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: None PART NUMBERS/SERIES/FAMILIES AFFECTED: SQJ912AEP-T1_GE3, SQJ912AEP-T2_GE3, SQJ912AEP-T1_BE3, VISHAY BRAND(s): Vishay Siliconix TIME SCHEDULE: Last Time Buy Date: Mon Jan 10, 2022 Last Time Ship… download now
2021_PTN-SIL-014-2021-Rev0.pdf Product Group: SIL/Thu May 20, 2021/PTN-SIL-014-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Conversion to Cu Wire – SQS401ENW DESCRIPTION OF CHANGE: The affected part number listed in this notification has been approved for termination. The recommended replacement part is the SQS411ENW-T1_GE3. This device offers a closely matched solution and an upgrade to the latest Cu wire material set for high volume production. The SQS411ENW-T1_GE3 uses our mature 1G P-Channel MOSFET technology from the same wafer fab and is assembled in the same facility as the SQS401EN-T1_GE3. A side by side comparison of the data sheet specifications is included with this notification. REASON FOR CHANGE: Standardization of materials EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: None PART… download now
2021_PTN-SIL-013-2021-Rev0.pdf Product Group: SIL/Thu May 20, 2021/PTN-SIL-013-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Conversion to Cu Wire – SQS401EN DESCRIPTION OF CHANGE: The affected part number listed in this notification has been approved for termination. The recommended replacement part is the SQS411ENW-T1_GE3. This device offers a closely matched solution and provides some beneficial features compared to the SQS401EN-T1_GE3. These include an upgrade to the latest Cu wire material set and pins with wet-able flanks. This feature promotes improved solder coverage and solder filet shape at the lead tips. The outer most dimensions are unchanged and the same PCB land pattern is required. The SQS411ENW-T1_GE3 uses our mature 1G P-Channel MOSFET technology from the same wafer fab and is assembled in… download now
2021_PTN-SIL-003-Rev0.pdf Product Group: SIL/Wed Jan 20, 2021/PTN-SIL-003-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Conversion to Cu Wire – SQS423EN DESCRIPTION OF CHANGE: The affected part number listed in this notification will be converted to a Copper wire material set. The new ordering code is SQS423ENW-T1_GE3, which has the exact same product performance and fit as SQS423EN-T1_GE3. In addition, the SQS423ENW-T1_GE3 package also includes pins with wet-able flanks. This feature promotes improved solder coverage and solder filet shape at the lead tips. The outer most dimensions are unchanged and the same PCB land pattern is required. There will be no change to the wafer fab or assembly location. There will be no changes to the parameters on the datasheet (reference: SQS423ENW Doc #75549, Rev.A) -… download now
2021_PTN-SIL-000413-2021-Rev0.pdf Product Group: SIL/Tue Oct 26, 2021/PTN-SIL-000413-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Vishay Siliconix announces the end of life of PDIP14 Analog Switches DESCRIPTION OF CHANGE: End of Life of PDIP 14 ICs REASON FOR CHANGE: No more assembly capacity EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N/A PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Siliconix TIME SCHEDULE: Last Time Buy Date: Mon May 2, 2022 Last Time Ship Date: Wed Nov 2, 2022 SAMPLE AVAILABILITY: N/A PRODUCT IDENTIFICATION: N/A QUALIFICATION DATA: N/A This PCN is considered approved, without further notification, unless we receive specific customer concerns before Mon May 2, 2022 or as specified by contract. ISSUED BY: Isabelle… download now
2021_PTN-SF-280-2021-Rev0.pdf Product Group: SF/Fri Oct 22, 2021/PTN-SF-280-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Obsolescence. Sfernice Medium Power Resistors LTO very low values in 1% and 2% tolerances. DESCRIPTION OF CHANGE: In conformance with our Product Life Management procedure and due to some major raw material issues, Sfernice Division is transferring some LTO30, LTO50 and LTO100 part numbers to an End Of Life status. REASON FOR CHANGE: Raw Material issues. Below listed low values in 1% and 2% cannot be manufactured anymore. LBOs are not possible. Backlog orders for mentionned P/Ns must be changed to 5% tolerance Parts. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: none PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay… download now
2021_PTN-SF-278-2021-Rev0.pdf Product Group: SF/Mon Sep 27, 2021/PTN-SF-278-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Obsolescence. Sfernice Metal Film Resistor RCMX. DESCRIPTION OF CHANGE: In conformance with our Product Life management procedure and due to a decreasing demand, Sfernice Division is transferring the RCMX Metal Film resistors serie to an End Of Life status. REASON FOR CHANGE: Decreasing demand EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: Limitation on Last Buy Orders. LBOs are subject to quantity check before acknowledgement. PART NUMBERS/SERIES/FAMILIES AFFECTED: RCMX* VISHAY BRAND(s): Vishay Sfernice TIME SCHEDULE: Last Time Buy Date: Thu Mar 31, 2022 Last Time Ship Date: Fri Sep 30, 2022 SAMPLE AVAILABILITY: n/a PRODUCT IDENTIFICATION: n/a QUALIFICATION DATA: n/a This PCN is… download now
2021_PTN-SF-275-2021-Rev0.pdf Product Group: SF/Fri Jul 30, 2021/PTN-SF-275-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Discontinuation of MSP1C and MSP2C series DESCRIPTION OF CHANGE: Discontinuation of MSP1C and MSP2C series REASON FOR CHANGE: Equipment obsolescence and low business EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: Not Applicable PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Sfernice TIME SCHEDULE: Last Time Buy Date: Sun Jan 30, 2022 Last Time Ship Date: Mon Aug 1, 2022 SAMPLE AVAILABILITY: Not Applicable PRODUCT IDENTIFICATION: MSP1C and MSP2C QUALIFICATION DATA: Not Applicable This PCN is considered approved, without further notification, unless we receive specific customer concerns before Thu Sep 30, 2021 or as… download now
2021_PTN-SF-273-2021-Rev0.pdf Product Group: SF/Mon Jul 19, 2021/PTN-SF-273-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Discontinuation of SG3 series DESCRIPTION OF CHANGE: Discontinuation of SG3 series REASON FOR CHANGE: Equipment obsolescence and low business EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: Not applicable PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Sfernice TIME SCHEDULE: Last Time Buy Date: Fri Jan 21, 2022 Last Time Ship Date: Fri Jul 22, 2022 SAMPLE AVAILABILITY: NA PRODUCT IDENTIFICATION: SG QUALIFICATION DATA: NA This PCN is considered approved, without further notification, unless we receive specific customer concerns before Tue Aug 31, 2021 or as specified by contract. ISSUED BY: Michael Ott,… download now
2021_PTN-PPSR-210324.pdf March. 24, 20 21 Product Name ; Fixed Resistor Code nr. ; PPSR Series Subject ; Announcement on discontinued productions Dear Mr. Stai ge r Jochen , Thanks for your kind cooperation. We make an announcement that this PPSR Ser ies would be discontinued the productions in PILKOR from July due to Pb free regulation. Please refer to attached regulation. [Official last Production schedule : May . 3 1,20 21 ] We always appreciate for your cooperation. Best regards, I.Y. So / Sr. Mgr. of Overseas Sales PILKOR Electronics Division (of COWELL Fashion Co., Ltd. ) 270, Sinwon -Ro, YeongTong -Gu, Suwon City, GyeongGi -Do. Republic of Korea download now
2021_PTN-OSI-1188-2021-Rev0.pdf Product Termination Notification Product Group: Opto Sensors & IRDC 15 -JUN -2021 / PTN OSI -1188 -2021 Rev. 0 TITLE : Discontinuation of selected proximity sensors Affected part numbers are announced for end of life. Recommended alternatives for the Proximity sensors were given in the attached file "PTN OSI -1188 -2021 - alternatives.pdf". DESCRIPTION OF CHANGE : Product Obsolescence CLASSIFICATION OF CHANGE : low demand REASON FOR CHANGE : Optical Sensors PRODUCT CATEGORY : PART NUMBERS / SERIES / FAMILIES AFFECTED: VCNL4100 VCNL36821S VCNL36821S -SB VISHAY SEMICONDUCTORS VISHAY BRAND(s) : TIME SCHEDULE: Annotations about time schedule: Last Time Buy Date : 30 -SEP -2021 Last Time Shipment Date : 30 -DEC -2021 SAMPLES AVAILABLE BEGINNING : 08 -JUN -2021 We need samples of replacement parts for evaluation: o Yes o No If Yes return this form to contact information below. This PCN is considered approved, without further notification, unless we receive specific customer concerns before :… download now
2021_PTN-OPT-1198-2021-Rev0.pdf Product Group: OPT/Tue Oct 26, 2021/PTN-OPT-1198-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT End of life of TFBR4650E-TT3 and TFBR4650-TR1 DESCRIPTION OF CHANGE: We are consolidating our product portfolio by eliminating parts which showed low billings/bookings for the last three years. We recommend customers to focus on TFBS4650 Series for new designs. TFBS4650 products have the same package outline and electrical characteristics, but different pin out. REASON FOR CHANGE: No demand / Portfolio Consolidation. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: - PART NUMBERS/SERIES/FAMILIES AFFECTED: TFBR4650E-TT3, TFBR4650-TR1, VISHAY BRAND(s): Vishay Semiconductors TIME SCHEDULE: Last Time Buy Date: Mon Apr 25, 2022 Last Time Ship Date: Sat Oct 22, 2022 SAMPLE… download now
2021_PTN-OPT-1196-2021-Rev0.pdf Product Group: OPT/Fri Aug 6, 2021/PTN-OPT-1196-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Obsolescence of LED and 7-Segment Display products with no or low sales DESCRIPTION OF CHANGE: The Products defined in this Product Termination Notice have reached their end of life and are obsoleted. REASON FOR CHANGE: Declining demand of affected parts and parts with difficulties for the material supply. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: - PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Semiconductors TIME SCHEDULE: Last Time Buy Date: Sun Feb 6, 2022 Last Time Ship Date: Fri Aug 5, 2022 SAMPLE AVAILABILITY: Samples for recommended alternatives, where applicaple, are available on request. Last time… download now
2021_PTN-NLR-001-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355- 2143 U.S.A. Phone (610) 644- 1300 Fax (610) 296- 0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT MKT010- 06 Withdrawal of C01N40 6F DESCRIPTION OF CHANGE: Vishay has the intention to withdraw NTC thermistor C01N40 6F. CLASSIFICATION OF CHANGE: Product Obsolescence REASON FOR CHANGE: Lack of Market demand and raw material obsolescence. EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: N A PRODUCT CATEGORY: Resistors, Non -Linear , Thermistors PART NU MBERS/SERIES/FAMILIES AFFECTED: C01N4 06F VISHAY BRAND(s): Vishay Dale TIME SCHEDULE: Start Shipment Date : NA Las t Time Buy Date: September 3 0 th, 2021 Last Time Shipment Date: December 3 1 st, 2021 SAMPLE AVAILABILITY: NA PRODUCT IDENTIFICATION: NA QUALIFICATION DATA: NA This P CN is considered approved, without further notification, unless we receive specific customer concerns… download now
2021_PTN-MLC-00010-2021-Rev0.pdf Product Group: MLC/Sun Jul 4, 2021/PTN-MLC-00010-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Changes to Available Ratings of GA….31G/34G Automotive MLCC Low Cap Values C0G(NP0) Dielectric DESCRIPTION OF CHANGE: Several part numbers of Automotive Series GA....31G/34G in C0G(NP0) dielectric (code “A”) are removed from offering. REASON FOR CHANGE: In order to maximize MLCC production efficiency and enhance production flexibility it was decided to phase out partial items and streamline portfolio. - Raw material for this C0G(NP0) dielectric range is supplied by ISO/IATF16949 qualified manufacturer. - Suggested part numbers replacement comes from GA …31M/34G Automotive HIFREQ Series, datasheet: http://www.vishay.com/doc?45248 EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE:… download now
2021_PTN-MLC-00009-2021-Rev0.pdf Product Group: MLC/Sun Jul 4, 2021/PTN-MLC-00009-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Changes to Available Ratings of VJ….31X Automotive MLCC Low Cap Values C0G(NP0) Dielectric Tin Plated Termination Code “X” DESCRIPTION OF CHANGE: Several part numbers of Automotive Series VJ....31X in C0G(NP0) dielectric (code “A”) with 100% matte tin termination (ordering code “X”) are removed from offering. REASON FOR CHANGE: In order to maximize MLCC production efficiency and enhance production flexibility it was decided to phase out partial items and streamline portfolio. - Raw material for this C0G(NP0) dielectric range is supplied by ISO/IATF16949 qualified manufacturer. - Suggested part numbers replacement comes from GA …31M Automotive HIFREQ Series, datasheet:… download now
2021_PTN-MLC-00004-2021-Rev0.pdf Product Group: MLC/Wed Jun 30, 2021/PTN-MLC-00004-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Changes to Available Ratings of VJ….31 Automotive MLCC Low Cap Values C0G(NP0) Dielectric Tin Termination Code “X” DESCRIPTION OF CHANGE: Several part numbers of Automotive Series VJ....31 in C0G(NP0) dielectric (code “A”) with 100% matte tin termination (ordering code “X”) are removed from offering. REASON FOR CHANGE: - In order to maximize MLCC production efficiency and enhance production flexibility it was decided to phase out partial items and streamline portfolio. - Raw material for this C0G(NP0) dielectric range is supplied by ISO/IATF16949 qualified manufacturer. - Suggested part numbers replacement comes from GA …31M Automotive HIFREQ Series, datasheet:… download now
2021_PTN-LFPTN2021-001.pdf Product Termination Notice (PTN) Littelfuse, Inc. 8755 West Higgins Road, Suite 500 Chicago, IL 60631 USA (773) 628 -1000 1 Ma rch 18, 2021 LFP TN 2021 -001 Discrete IGBT IXXX100N75B4H1 and IXXK100N75B4H1 to be obsolete To whom it may concern, In our constant efforts to improve our service to our valued customers and make our supply chain more agile and lean, we are obsoleting the list of part numbers shown belo w. These products are currently not highly demanded as they are being sub stituted by our newest XPT Discrete IGBT product family. We encourage you to visit our website to find a suitable substitute for your system, if needed. Last time Buy : June 15 th, 202 1 Effective date : Sept 1st, 202 1 Material to be OB: OB Effective Date Last Book Date for New Orders IXXK100N75B4H1 1-Sep -21 15 -Jun -21 IXXX100N75B4H1 1-Sep -21 15 -Jun -21 This communication letter is for your information and acknowledgement. If you have any other questions or concerns, please contact your local… download now
2021_PTN-LFPTN-A0197.pdf 8755 W. Higgins Road Suite 500 Chicago, IL 60631 www.littelfuse.com Jan 22 nd , 202 1 LF P TN A0197 : Obsolescence and Last B uy Notification of Reflowable Thermal Protector - HCRTP200 Series Dear Valued Customer, First of all, we want to thank our customers for your support during current challenging pandemic situation. Littelfuse Inc., as the leading provider of total circuit protection solution with global commitment to providing the highest quality products, would like to notify you about the obsolescence and last buy of the Reflowable Thermal Protector -HCRTP200 series . Littelfuse will accept orders for the old part numbers till Jun 30th, 202 1, with last shipment date of Jun 30th, 202 2. Please refer to the following list for impacted materials. Littelfuse has HCRTP MINI series as the direct replacement for the current HCRTP200 series and is available for immediate conversion. Current Replacement Product P/N Product Description Product P/N Product Description RF4545 -000… download now
2021_PTN-IUK2021-001_2.pdf Form reference: I MS-003A, issue 3 Form issue date: 05/06/20 Product Discontinuation Notice PDN N ° IUK2021 -001 Date 19 th March 2021 Raised by Matthew Byrom Part numbers affected Detailed below. Effectivity date 5th Ma rch 2021 Last time buy date 30 th June 2021 Last delivery date 21 st December 2021 This document aims to inform you of the discontinuation of a range of power modules of various topologies in both standard and water -cooled variants. The decision has been made to make the power modules detailed in this document obsolete, due to lack of demand and the closure of the existing product production line at the end of the year. Part numbers to be made obsolete. MDA600 -14N1 MDK 600 -22N1 MCC50 0-18io1 MCK550 -16io1 MDC5 00-22i o1 MD D950 -22N1W MDA600 -18N1 MCA500 -14io1 MCC500 -22io 1 MCD500 -14io1 MDC 550-12io1 MDK950 -14N1W MDA600 -22N1 MCA500 -18io1 MCC550 -12io1 MCD500 -18io1 MDC550 -16io1 MDK950 -18N1W MDD600 -12N1 MCA500 -22io1 MCC550-16io 1 MCD500 -22io 1 MDA950… download now
2021_PTN-IUK2021-001.pdf Form reference: IMS-003A, issue 3 Form issue date: 05/06/20 Product Discontinuation Notice PDN N° IUK2021-001 Date 5 th March 2021 Raised by Matthew Byrom Part numbers affected Detailed below. Effectivity date 5th March 2021 Last time buy date 30 th June 2021 Last delivery date 21 st December 2021 This document aims to inform you of the discontinuation of a range of power modules of various topologies in both standard and water-cooled variants. The decision has been made to make the power modules detailed in this document obsolete, due to lack of demand and the closure of the existing product production line at the end of the year. Part numbers to be made obsolete. MDA600 -14N1 MDK600 -18N1 MCC500 -14iO1 MCK500 -22io1 MCD550 -16io1 MDA950 -18N1W MDK950 -14N1W MDA600 -18N1 MDK600 -22N1 MCC500 -18io1 MCK550 -12io1 MDC500 -14io1 MDA950 -22N1W MCD600 -22io1W MDA600-22N1 MCA500-14iO1 MCC500-22io1 MCK550-16io1 MDC500-18io1 MDD950-14N1W MCD700-14io1W MDD-600-14N1 MCA500-18io1 MCC550-12io1… download now
2021_PTN-DR-24-2021-Rev0.pdf Product Group: DR/Mon Dec 6, 2021/PTN-DR-24-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Product Termination Of CA, CP and CPCC Commercial Wire Wound Resistors DESCRIPTION OF CHANGE: End of life for the commercial wire wound CA, CP, CPCC series resistors REASON FOR CHANGE: CA, CP and CPCC series resistors utilize fiberglass core. Vendors for the fiberglass rope are scarce and many have abandoned the market. Due to a lack of raw material, Vishay is announcing the EOL for the above listed products effective immediately. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: Not applicable PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Dale TIME SCHEDULE: Last Time Buy Date: Mon Jun 20, 2022 Last Time Ship Date: Sat… download now
2021_PTN-DR-00013-2021-Rev0.pdf Product Group: DR/Fri May 14, 2021/PTN-DR-00013-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT WSR2-9 Jumper - Obsolescence DESCRIPTION OF CHANGE: WSR2-9 copper jumper will be obsoleted due to declining sales. Standard WSR current sense resistors are not affected; only the jumper version. WSL-9 copper jumper is an available option; https://www.vishay.com/docs/30192/wsl-9.pdf. REASON FOR CHANGE: Declining sales. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: Not applicable. PART NUMBERS/SERIES/FAMILIES AFFECTED: WSR200000ZEA9, WSR200000ZTA9, VISHAY BRAND(s): Vishay Dale TIME SCHEDULE: Last Time Buy Date: Mon Sep 20, 2021 Last Time Ship Date: Fri May 20, 2022 SAMPLE AVAILABILITY: WSL-9 available now; https://www.vishay.com/docs/30192/wsl-9.pdf. PRODUCT IDENTIFICATION: Not… download now
2021_PTN-DR-00004-Rev0.pdf Product Group: DR/Tue Feb 16, 2021/PTN-DR-00004-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT WSK0612 Obsolescence DESCRIPTION OF CHANGE: WSK0612 product termination. Vishay will discontinue the clad construction design of the WSK0612. The suggested alternative will be the WSKW0612; https://www.vishay.com/product?docid=30332. The WSKW series is a drop-in replacement to the obsoleted WSK0612 with better performance. The WSKW0612 is equivalent with an all metal construction, but instead of a clad construction is made of a welded copper terminal. The advantages are detailed in the application note; WSKW0612 Welded Terminal Advantage; https://www.vishay.com/docs/30333/wskw0612.pdf. REASON FOR CHANGE: The welded construction of the WSKW0612 is superior to the clad construction of… download now
2021_PTN-DD-019-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Product Obsolescence DESCRIPTION OF CHANGE: Vishay Diodes Division will discontin ue some Zener , Switching and ESD part numbers . CLASSIFICATION OF CHANGE: Product Obsolescence REASON FOR CHANGE: Low sales, Portfolio Consolidation EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N/A PRODUCT CAT EGORY: Diodes PART NU MBERS/SERIES/FAMILIES AFFECTED: See the complete part number list from page 2 VISHAY BRAND(s): Vishay Semiconductors TIME SCHEDULE: Last Time Buy Date : May 12, 202 2 Last Time Shipment Date: November 12, 20 22 Last Time return Date: May 12, 2022 Expiration of Ship and Debit: November 12, 2022 SAMPLE AVAILABILITY: N/A PRODUCT IDENTIFICATION: N/A QUALIFICATION… download now
2021_PTN-DD-013-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Product Obsolescence DESCRIPTION OF CHANGE: Vishay Semiconductor announces the discontinuation of a power module part number. CLASSIFICATION OF CHANGE: Product Obsolescence REASON FOR CHANGE: Discontinued supply of Mosfet die EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N/A PRODUCT CATEGORY: Modules PART NUMBERS/SERIES/FAMILIES AFFECTED: Obsolete Part Number Replacement Part Number VS-FA72SA50LC NA VISHAY BRAND(s): Vishay Semiconductors TIME SCHEDULE: Last Time Buy Date: January 9 th, 2022 Last Time Shipment Date: July 9 th, 2022 Last Time Return Date: January 9 th, 2022 Expiration of Ship and Debit: July 9 th, 2022 SAMPLE AVAILABILITY: Not applicable PRODUCT… download now
2021_PTN-DD-009-Rev0.pdf Prod uc t G roup: Diodes Division / April 23 , 20 21 / PCN-DD -00 9-20 21 Re v. 0 1/2 Product Discontinuation Notice of Rectifier Products DE SCRIPTION OF CHANGE: Vishay Diodes will discontinue some Rectifier part numbers with low volume sales. CLASSIFI CATION OF CHANGE: Product Termination REASON FOR C HANGE: Low sales EXPEC TED INFL UENCE ON QUALIT Y/RE LIABILI TY/PER FOR M ANCE: N/A PROD UCT CATE GOR Y: Rectifiers PART N UMBERS /SERIES/ FAMILI ES AFF ECTED: Involved part numbers are listed below Package Obsolete P/N Alternative P/N Package Obsolete P/N Alternative P/N D2PAK MBRB1045001HE3_B/I MBRB1045HE3_B/I GBL G2SB80-E3/45 GBLA08-E3/45 DO-201AD SB360-5300E3/73 SB360-E3/54 GBL G2SB80-E3/51 GBLA08-E3/51 DO-201AD SB360L-5705E3/72 SB360-E3/54 GBL G2SB80-M3/45 GBLA08-M3/45 DO-201AD SB3H100L-5700E3/72 SB3H100-E3/54 GBL G2SB80-M3/51 GBLA08-M3/51 DO-204AL EGP10AE-E3/54 EGP10A-E3/54 GSIB5S GSIB6A20-E3/45 GSIB620-E3/45 DO-204AL EGP10BE-E3/54 EGP10B-E3/54 GSIB5S GSIB6A20N-M3/45… download now
2021_PTN-DBR-00011-2021-Rev0.pdf Product Group: DBR/Wed Jul 28, 2021/PTN-DBR-00011-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Withdrawal of 100 pieces packaging for thin film chip MC- and and MELF MM-series DESCRIPTION OF CHANGE: Vishay has the intention to withdraw packaging codes for 100 pieces per packaging of thin film chip MC- and and MELF MM-series REASON FOR CHANGE: Lack of market demand. Components are further available in reel packaging, at least 1.000 pieces per reel. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: none PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Beyschlag TIME SCHEDULE: Last Time Buy Date: Fri Jul 30, 2021 Last Time Ship Date: Fri Jul 30, 2021 SAMPLE AVAILABILITY: Not applicable PRODUCT IDENTIFICATION: Not… download now
2021_PTN-DBR-00010-2021-Rev1.pdf Product Group: DBR/Wed Aug 4, 2021/PTN-DBR-00010-2021-REV-1 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Withdrawal of M10, M11, M12, M25 series DESCRIPTION OF CHANGE: Vishay has the intention to withdraw M10, M11, M12, M25 series REASON FOR CHANGE: Lack of market demand. Replacement TNPW e3 or MC series depending on customer requirement. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: Not applicable PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Draloric TIME SCHEDULE: Last Time Buy Date: Tue Feb 1, 2022 Last Time Ship Date: Sun Jul 31, 2022 SAMPLE AVAILABILITY: Not applicable PRODUCT IDENTIFICATION: Not applicable QUALIFICATION DATA: Not applicable This PCN is considered approved, without further notification,… download now
2021_PTN-DBR-00010-2021-Rev0.pdf Product Group: DBR/Wed Jul 28, 2021/PTN-DBR-00010-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Withdrawal of M10, M11, M12, M25 series DESCRIPTION OF CHANGE: Vishay has the intention to withdraw M10, M11, M12, M25 series REASON FOR CHANGE: Lack of market demand. Replacement TNPW e3 or MC series depending on customer requirement. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: Not applicable PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Draloric TIME SCHEDULE: Last Time Buy Date: Tue Feb 1, 2022 Last Time Ship Date: Sun Jul 31, 2022 SAMPLE AVAILABILITY: Not applicable PRODUCT IDENTIFICATION: Not applicable QUALIFICATION DATA: Not applicable This PCN is considered approved, without further notification,… download now
2021_PTN-DBR-00008-2021-Rev0.pdf Product Group: DBR/Mon Jun 28, 2021/PTN-DBR-00008-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Product Discontinuation – Zero Ohm Jumpers - Standard Metal Film Leaded Resistors SFR16S and SFR25. DESCRIPTION OF CHANGE: Zero Ohm Jumpers from SFR16S and SFR25 series Standard Metal Film Leaded Resistors will be discontinued. Drop-in replacements will be as follows: SFR16S00Z0000ZA500 Replaced by MBA02040Z0000ZCT00, SFR16S00Z0000ZR500 Replaced by MBA02040Z0000ZRP00, SFR25000Z0000ZA100 Replaced by MBB02070Z0000ZC100, SFR25000Z0000ZA500 Replaced by MBB02070Z0000ZCT00 SFR25000Z0000ZR500 Replaced by MBB02070Z0000ZRP00. REASON FOR CHANGE: Unviable manufacturing due to low market demand and non availability of raw materials. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N.A. PART… download now
2021_PTN-Change_in_masterdata_Weidmueller-ZQVcrossconnection.pdf Creation Date: 2021 -07 -16 English version below. Sehr geehrte Damen und Herren, mit der angehängten Excel -Datei informieren wir Sie heute über Änderungen unserer Artikelstammdaten im Bereich der Querverbindungen (Zubehör für Reihenklemmen). Am 31.12.2021 werden die Artikelnummern aus Spalte A abgekündigt und durch bereits im Sortiment befindliche funktionsgleiche Alternativen abgelöst ( ab Spalte D). Wir bitten Sie diese Änderung in Ihren Weidmüller Materialstamm zu übernehme n. Weitere Informationen zu dieser Produktabkündigung finden Sie unter www.weidmueller.de/Abkuendigung_ZQV . Sie möchten Ihren Weidmüller Materialstamm komplett aktualisieren? Eine aktuelle Produktdatenzusammenstellung im BMEcat Format finden Sie als Download auf unserer Internetseite www.weidmueller.de/bmecat . ---------------------------------------------------------- Dear Ladies and Gentlemen, with the attached Excel -file we inform you today regarding changes in our master data for cross - connections… download now
2021_PTN-CC-00006-2021-Rev0.pdf Product Group: CC/Mon Nov 15, 2021/PTN-CC-00006-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Obsolescence of Certain Power Capacitors DESCRIPTION OF CHANGE: Due to shrinking market demand it is not feasible anymore to support the ceramic power capacitors mentioned. REASON FOR CHANGE: Due to shrinking market demand it is not feasible to keep the special manufacturing and testing equipment for the ceramic power capacitors mentioned herein running. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N/A PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Draloric TIME SCHEDULE: Last Time Buy Date: Thu Sep 1, 2022 Last Time Ship Date: Wed Mar 1, 2023 SAMPLE AVAILABILITY: N/A PRODUCT IDENTIFICATION: by part number… download now
2021_PTN-AC-00506-2021-Rev0.pdf Product Group: AC/Mon Sep 27, 2021/PTN-AC-00506-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Vishay BCcomponents Capacitors Termination of 6.3V Voltage Range of 196 DLC Series DESCRIPTION OF CHANGE: Discontinuance of PN MAL219613473E3, MAL219613104E3, MAL219613474E3 and MAL219613684E3 without replacement. REASON FOR CHANGE: Poor availability of key raw materials and low market demand. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N/A PART NUMBERS/SERIES/FAMILIES AFFECTED: MAL219613473E3, MAL219613104E3, MAL219613474E3, MAL219613684E3, VISHAY BRAND(s): Vishay BCcomponents TIME SCHEDULE: Last Time Buy Date: Sun Mar 27, 2022 Last Time Ship Date: Fri Sep 23, 2022 SAMPLE AVAILABILITY: N/A PRODUCT IDENTIFICATION: Capacitance and voltage ratings are printed on the products,… download now
2021_PTN-AC-00504-2021-Rev0.pdf Product Group: AC/Tue Jun 15, 2021/PTN-AC-00504-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Vishay BCc Aluminum Capacitors Discontinuance of Part Number: MAL214095897E3 DESCRIPTION OF CHANGE: Discontinuance of part number MAL214095897E3. This Product Termination Notice (PTN) is subsequent to PCN-AC-504-2017 rev0. REASON FOR CHANGE: Poor availability of key raw materials EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: Maximum last time buy quantity is 2000 pcs. (in one batch, single order) PART NUMBERS/SERIES/FAMILIES AFFECTED: MAL214095897E3 VISHAY BRAND(s): Vishay BCcomponents TIME SCHEDULE: Last Time Buy Date: Mon Dec 13, 2021 Last Time Ship Date: Sat Jun 11, 2022 SAMPLE AVAILABILITY: N/A PRODUCT IDENTIFICATION: Capacitance and voltage are printed on the products,… download now
2021_PTN-AC-00503-2021-Rev1.pdf Product Group: AC/Tue Mar 30, 2021/PTN-AC-00503-2021-REV-1 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Vishay Roederstein Aluminum Capacitors Discontinuance of Radial and SMD Series DESCRIPTION OF CHANGE: Termination of Vishay Roederstein series ECA, ECL, ECV, EKA, EKB, EKE and EKV. Available alternatives can be found in seperate crosslist. Any PN within these series, whether listed or not, will also be affected. Revision 1 update: 53 part numbers added. REASON FOR CHANGE: Poor availability of key raw materials and low market demand. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N/A PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Roederstein TIME SCHEDULE: Last Time Buy Date: Thu Sep 30, 2021 Last Time Ship Date:… download now
2021_PTN-AC-00503-2021-Rev0.pdf Product Group: AC/Mon Mar 1, 2021/PTN-AC-00503-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Vishay Roederstein Aluminum Capacitors Discontinuance of Radial and SMD Series DESCRIPTION OF CHANGE: Termination of Vishay Roederstein series ECA, ECL, ECV, EKA, EKB, EKE and EKV. Available alternatives can be found in seperate crosslist. Any PN within these series, whether listed or not, will also be affected. REASON FOR CHANGE: Poor availability of key raw materials and low market demand. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N/A PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Roederstein TIME SCHEDULE: Last Time Buy Date: Thu Sep 30, 2021 Last Time Ship Date: Thu Mar 31, 2022 SAMPLE AVAILABILITY: N/A… download now
2021_PTN-AC-00502-Rev0.pdf Product Group: Aluminum Capacitors Feb . 23th, 20 21 / PCN -AC -00 50 2-20 21 Rev 0, page 1 of 3 Vishay BCcomponents Austria GmbH Ebentalerstrasse 140, A -9020 Klagenfurt / Austria Phone +43 463 3834 –0 www.vishay.com ON E OF T H E W OR LD ’S LA R GE S T MA N U FA C T U R E R S O F D IS C R E T E S E MIC ON D U C T OR S A N D P A S S IV E C OMP ON E N T S Vishay BCcomponents Capacitors Discontinuance of Product S eries EKC and 136 RVI (partly) DESCRIPTION OF CHANGE: Termination of pro duct series EKC and 136 RVI (partly) with Vishay BCcomponents and Vishay Roederstein brand . CLASSIFICATION OF C HANGE: Product termination without replacement REASON FOR CHANGE: Poor availability of key raw materials and low market demand EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: n/a PRODUCT CATEGORY: Aluminum Electrolytic Capacitors PART NUMBERS/SERIES/FAMILIES AFFECTED: EKC: complete ser ies ; 136 RVI: only case sizes: 10x25, 10x30, 12,5x16, 12,5x31; Part number list can be found in ANNEX… download now
2021_PTN-AC-00501-Rev1.pdf Product Group: Aluminum Capacitors Feb . 23th, 20 21 / PCN -AC -00 50 1-20 21 Rev 1, page 1 of 3 Vishay BCcomponents Austria GmbH Ebentalerstrasse 140, A -9020 Klagenfurt / Austria Phone +43 463 3834 –0 www.vishay.com ON E OF T H E W OR LD ’S LA R GE S T MA N U FA C T U R E R S O F D IS C R E T E S E MIC ON D U C T OR S A N D P A S S IV E C OMP ON E N T S Vishay BCcomponents Capacitors Discontinuance of Product S eries 097 RLP7 and 134 RLP5 DESCRIPTION OF CHANGE: Termination of pro duct series 097 RLP7 and 134 RLP5 with Vishay BCcomponents brand . CLASSIFICATION OF C HANGE: Product termination without replacement REASON FOR CHANGE: Poor availability of key raw materials and low market demand EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: n/a PRODUCT CATEGORY: Aluminum Electrolytic Capacitors PART NUMBERS/SERIES/FAMILIES AFFECTED: 097 RLP7 and 134 RLP5 , complete ser ies ; Part number list can be found in ANNEX below. Any other PN within these series with specification above,… download now
2021_PTN-AC-00002-2021-Rev0.pdf Product Group: AC/Tue Mar 23, 2021/PTN-AC-00002-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Vishay BCcomponents Aluminum Electrolytic Capacitors End of Life for 159 PUL-SI Compact DESCRIPTION OF CHANGE: Discontinuation of Aluminum Electrolytic Snap-In series 159 PUL-SI Compact. Available alternatives can be found in separate replacement list. REASON FOR CHANGE: Portfolio Management. Better and more suitable products available in other Snap-In series. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: No influence PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay BCcomponents TIME SCHEDULE: Last Time Buy Date: Tue Sep 21, 2021 Last Time Ship Date: Sun Mar 20, 2022 SAMPLE AVAILABILITY: N/A PRODUCT IDENTIFICATION:… download now
2021_PTN-210201.pdf End of Life Notice EOL # : 210201 Product Affected : Shielded SMD Power Inductor – PDRH Series Issue Date : 2021 /2/8 Contact : ALL Customer s Attachment: □ Yes ■ No 1. Introduction Viking will perform officially the End of Life to the product as below: Phase -out series: Shielded SMD Power Inductor - PD RH Series The reason of EOL: The demand of the product is few and the core supplier will not produce the core . 2. Planned Schedule Last buy date : 20 21 /8/9 3. Replacement Product N/A VIKING TECH CORPORATION No.70,Kuanfu N.Road,Hsin Chu Industrial Park,Hsin Chu Hsien 303,Taiwan,R.O.C. QA Deputy Director : Ben Chang download now
2021_PDN_2021-018.pdf page 1 of 1 4.14F14a P RODUCT D ISCONTINUATION N OTICE PDN No.: 2021/018 IXYS product type: Type Recommended replacement VUO34-14NO1 VUO34-16NO1 VUO52-14NO1 VUO52-16NO1 VUO80-14NO1 VUO80-16NO1 Reason: Low demand Last time order date: 31.03.2022 Last time delivery date: 31.12.2022 Internal Reference: PO_2021-018 In case of any question, please contact Initiator Title/Function Date e-mail Ostmann PM 18.11.2021 hostmann@littelfuse.com IXYS Semiconductor GmbH Edisonstr. 15 D-68623 Lampertheim Phone: +49-6206-503-xxx Fax: +49-6206-503 -627 Customer response: (please fill in and return by e-mail, fax or mail w ithin 4 weeks) for further questions / information Company: ___________________________________________________ ______ please comment Name & Position: ___________________________________________________ ______ Phone / Fax No.: ___________________________________________________ ______ Comments: ___________________________________________________… download now
2021_PDN_2021-017.pdf page 1 of 1 4.14F14a P RODUCT D ISCONTINUATION N OTICE PDN No.: 2021/017 IXYS product type: Type Recommended replacement VUO60-12NO3 VUO80-12NO1 VUO60-14NO3 VUO80-16NO1 VUO60-16NO3 VUO80-16NO1 VUO60-18NO3 VUO80-18NO1 Reason: Low demand Last time order date: 31.03.2022 Last time delivery date: 31.12.2022 Internal Reference: PO_2021-017 In case of any question, please contact Initiator Title/Function Date e-mail Ostmann PM 17.11.2021 hostmann@littelfuse.com IXYS Semiconductor GmbH Edisonstr. 15 D-68623 Lampertheim Phone: +49-6206-503-xxx Fax: +49-6206-503 -627 Customer response: (please fill in and return by e-mail, fax or mail w ithin 4 weeks) for further questions / information Company: ___________________________________________________ ______ please comment Name & Position: ___________________________________________________ ______ Phone / Fax No.: ___________________________________________________ ______ Comments: ___________________________________________________… download now
2021_PDN_2021-016.pdf page 1 of 1 4.14F14a P RODUCT D ISCONTINUATION N OTICE PDN No.: 2021/016 IXYS product type: Type Recommended replacement VUO50-08NO3 VUO80-08NO1 VUO50-12NO3 VUO80-12NO1 VUO50-14NO3 VUO80-16NO1 VUO50-16NO3 VUO80-16NO1 VUO50-18NO3 VUO80-18NO1 Reason: Low demand Last time order date: 31.03.2022 Last time delivery date: 31.12.2022 Internal Reference: PO_2021-016 In case of any question, please contact Initiator Title/Function Date e-mail Ostmann PM 17.11.2021 hostmann@littelfuse.com IXYS Semiconductor GmbH Edisonstr. 15 D-68623 Lampertheim Phone: +49-6206-503-xxx Fax: +49-6206-503 -627 Customer response: (please fill in and return by e-mail, fax or mail w ithin 4 weeks) for further questions / information Company: ___________________________________________________ ______ please comment Name & Position: ___________________________________________________ ______ Phone / Fax No.: ___________________________________________________ ______ Comments:… download now
2021_PDN_2021-015.pdf page 1 of 1 4.14F14a P RODUCT D ISCONTINUATION N OTICE PDN No.: 2021/015 IXYS product type: Type Recommended replacement VUO30-08NO3 VUO52-08NO1 VUO30-12NO3 VUO52-12NO1 VUO30-14NO3 VUO52-16NO1 VUO30-16NO3 VUO52-16NO1 VUO30-18NO3 VUO52-18NO1 Reason: Low demand Last time order date: 31.03.2022 Last time delivery date: 31.12.2022 Internal Reference: PO_2021-015 In case of any question, please contact Initiator Title/Function Date e-mail Ostmann PM 17.11.2021 hostmann@littelfuse.com IXYS Semiconductor GmbH Edisonstr. 15 D-68623 Lampertheim Phone: +49-6206-503-xxx Fax: +49-6206-503 -627 Customer response: (please fill in and return by e-mail, fax or mail w ithin 4 weeks) for further questions / information Company: ___________________________________________________ ______ please comment Name & Position: ___________________________________________________ ______ Phone / Fax No.: ___________________________________________________ ______ Comments:… download now
2021_PDN_2021-014.pdf page 1 of 1 4.14F14a P RODUCT D ISCONTINUATION N OTICE PDN No.: 2021/014 IXYS product type: Type Recommended replacement VHF36-08IO5 2x MCD40-12IO6, VHFD37- 08IO1 VHF36-12IO5 2x MCD40-12IO6, VHFD37- 12IO1 VHF36-16IO5 2x MCD40-16IO6, VHFD37- 16IO1 Reason: Low demand Last time order date: 31.03.2022 Last time delivery date: 31.12.2022 Internal Reference: PO_2021-014 In case of any question, please contact Initiator Title/Function Date e-mail Ostmann PM 17.11.2021 hostmann@littelfuse.com IXYS Semiconductor GmbH Edisonstr. 15 D-68623 Lampertheim Phone: +49-6206-503-xxx Fax: +49-6206-503 -627 Customer response: (please fill in and return by e-mail, fax or mail w ithin 4 weeks) for further questions / information Company: ___________________________________________________ ______ please comment Name & Position: ___________________________________________________ ______ Phone / Fax No.: ___________________________________________________ ______ Comments:… download now
2021_PDN_2021-013.pdf page 1 of 1 4.14F14a P RODUCT D ISCONTINUATION N OTICE PDN No.: 2021/013 IXYS product type: Type Recommended replacement VHF28-08IO5 2x MCD40-12IO6, VHFD37- 08IO1 VHF28-12IO5 2x MCD40-12IO6, VHFD37- 12IO1 VHF28-16IO5 2x MCD40-16IO6, VHFD37- 16IO1 Reason: Low demand Last time order date: 31.03.2022 Last time delivery date: 31.12.2022 Internal Reference: PO_2021-013 In case of any question, please contact Initiator Title/Function Date e-mail Ostmann PM 17.11.2021 hostmann@littelfuse.com IXYS Semiconductor GmbH Edisonstr. 15 D-68623 Lampertheim Phone: +49-6206-503-xxx Fax: +49-6206-503 -627 Customer response: (please fill in and return by e-mail, fax or mail w ithin 4 weeks) for further questions / information Company: ___________________________________________________ ______ please comment Name & Position: ___________________________________________________ ______ Phone / Fax No.: ___________________________________________________ ______ Comments:… download now
2021_PDN_2021-012.pdf page 1 of 1 4.14F14a P RODUCT D ISCONTINUATION N OTICE PDN No.: 2021/012 IXYS product type: Type Recommended replacement VHF15-08IO5 2x MCD40-12IO6, VHFD37- 08IO1 VHF15-12IO5 2x MCD40-12IO6, VHFD37- 12IO1 VHF15-16IO5 2x MCD40-16IO6, VHFD37- 16IO1 Reason: Low demand Last time order date: 31.03.2022 Last time delivery date: 31.12.2022 Internal Reference: PO_2021-012 In case of any question, please contact Initiator Title/Function Date e-mail Ostmann PM 17.11.2021 hostmann@littelfuse.com IXYS Semiconductor GmbH Edisonstr. 15 D-68623 Lampertheim Phone: +49-6206-503-xxx Fax: +49-6206-503 -627 Customer response: (please fill in and return by e-mail, fax or mail w ithin 4 weeks) for further questions / information Company: ___________________________________________________ ______ please comment Name & Position: ___________________________________________________ ______ Phone / Fax No.: ___________________________________________________ ______ Comments:… download now
2021_PDN_2021-010.pdf page 1 of 1 4.14F14a P RODUCT D ISCONTINUATION N OTICE PDN No.: 2021/010 IXYS product type: Type Recommended replacement VUO125-12NO7 VUO160-12NO7 VUO125-16NO7 VUO160-16NO7 VUO125-18NO7 VUO160-18NO7 Reason: Low demand Last time order date: 31.12.2021 Last time delivery date: 31.05.2022 Internal Reference: PO_2021-010 In case of any question, please contact Initiator Title/Function Date e-mail Ostmann PM 31.05.2021 hostmann@littelfuse.com IXYS Semiconductor GmbH Edisonstr. 15 D-68623 Lampertheim Phone: +49-6206-503-xxx Fax: +49-6206-503 -627 Customer response: (please fill in and return by e-mail, fax or mail w ithin 4 weeks) for further questions / information Company: ___________________________________________________ ______ please comment Name & Position: ___________________________________________________ ______ Phone / Fax No.: ___________________________________________________ ______ Comments: ___________________________________________________… download now
2021_PDN_2021-009.pdf page 1 of 1 4.14F14a P RODUCT D ISCONTINUATION N OTICE PDN No.: 2021/009 IXYS product type: Type Recommended replacement VBO125-08NO7 VBO130-08NO7 VBO125-12NO7 VBO130-12NO7 VBO125-16NO7 VBO130-16NO7 Reason: Low demand Last time order date: 31.12.2021 Last time delivery date: 31.05.2022 Internal Reference: PO_2021-009 In case of any question, please contact Initiator Title/Function Date e-mail Ostmann PM 31.05.2021 hostmann@littelfuse.com IXYS Semiconductor GmbH Edisonstr. 15 D-68623 Lampertheim Phone: +49-6206-503-xxx Fax: +49-6206-503 -627 Customer response: (please fill in and return by e-mail, fax or mail w ithin 4 weeks) for further questions / information Company: ___________________________________________________ ______ please comment Name & Position: ___________________________________________________ ______ Phone / Fax No.: ___________________________________________________ ______ Comments: ___________________________________________________… download now
2021_PDN_2021-008.pdf page 1 of 1 4.14F14a P RODUCT D ISCONTINUATION N OTICE PDN No.: 2021/008 IXYS product type: Type Recommended replacement VUO105-12NO7 VUO160-12NO7 VUO105-16NO7 VUO160-16NO7 VUO105-18NO7 VUO160-18NO7 Reason: Low demand Last time order date: 31.12.2021 Last time delivery date: 31.05.2022 Internal Reference: PO_2021-008 In case of any question, please contact Initiator Title/Function Date e-mail Ostmann PM 31.05.2021 hostmann@littelfuse.com IXYS Semiconductor GmbH Edisonstr. 15 D-68623 Lampertheim Phone: +49-6206-503-xxx Fax: +49-6206-503 -627 Customer response: (please fill in and return by e-mail, fax or mail w ithin 4 weeks) for further questions / information Company: ___________________________________________________ ______ please comment Name & Position: ___________________________________________________ ______ Phone / Fax No.: ___________________________________________________ ______ Comments: ___________________________________________________… download now
2021_PDN-IUK2021-003.pdf Form reference: IMS-003A, issue 3 Form issue date: 05/06/20 PDN N°: IUK2021-003 Issue N°: 1 Date: 30/11/21 Product Discontinuation Notice Product type: Device Mounting Grease XSGSCX13 & XSGSCX13-8 Reason for discontinuation: No longer available for purchase Last time order date: With immediate affect Replacement product: None at this time For more details or if you have any questions please contact: Mr Howard Neal – Product Manager - Stacks IXYS UK Westcode Ltd Langley Park Way Chippenham, Wiltshire SN15 1GE E-mail: hneal@littelfuse.com General Tel : +44(0)1249 455500 Customer Response Please fill in and return by mail, E-mail or fax within 4 weeks Company: Name and position: Contact details: Comments: download now
2021_PDN-20211018.pdf October 18 th, 2021 ECOMAL EUROPE GmbH Discontinua tion of Surface -Mount and Antenna Module s We would like to express our sincere gratitude for your continued support of our products. We have manufactur ed and s old surface -mount antennas since 2002, but the demand for th is type of product has decreased in recent years and we realize it is financially not tenable to continue making and selling them. For business continuity, as of December 2023, we regret to say that we will withdr aw from the surface mount chip antenna business and end production and sales. By the end of September 2022 we would like to be able to ascertain the future needs of all our customers so we can provide them all they need before our end of production. We a pologize for the inconvenience caused to your company regarding our decision, and we are very sorry for the inconvenience. 1. Discontinued product : AM03, AM11, AHD surface -mount antennas UB14CP, UB18CP, UB23CP and custom antenna modules 2. Timeline :… download now
2021_PDN-20210419.pdf download now
2021_PDN-2021-006.pdf page 1 of 1 4.14F14a P RODUCT D ISCONTINUATION N OTICE PDN No.: 2021/006 IXYS product type: Type Recommended replacement VKM60-01P1 - - Reason: Low demand Last time order date: 31.08.2021 Last time delivery date: 31.12.2021 Internal Reference: PO_2021-006 In case of any question, please contact Initiator Title/Function Date e-mail Ostmann PM 13.04.2021 hostmann@littelfuse.com IXYS Semiconductor GmbH Edisonstr. 15 D-68623 Lampertheim Phone: +49-6206-503-xxx Fax: +49-6206-503 -627 Customer response: (please fill in and return by e-mail, fax or mail w ithin 4 weeks) for further questions / information Company: ___________________________________________________ ______ please comment Name & Position: ___________________________________________________ ______ Phone / Fax No.: ___________________________________________________ ______ Comments: ___________________________________________________ ___________________________________________________… download now
2021_PDN-2021-005.pdf page 1 of 1 4.14F14a P RODUCT D ISCONTINUATION N OTICE PDN No.: 2021/005 IXYS product type: Type Recommended replacement VUO55-12NO7 VUO82-12NO7 VUO55-16NO7 VUO82-16NO7, VUO84-16NO7 VUO55-18NO7 VUO82-18NO7 Reason: Low demand Last time order date: 31.08.2021 Last time delivery date: 31.12.2021 Internal Reference: PO_2021-005 In case of any question, please contact Initiator Title/Function Date e-mail Ostmann PM 23.03.2021 hostmann@littelfuse.com IXYS Semiconductor GmbH Edisonstr. 15 D-68623 Lampertheim Phone: +49-6206-503-xxx Fax: +49-6206-503 -627 Customer response: (please fill in and return by e-mail, fax or mail w ithin 4 weeks) for further questions / information Company: ___________________________________________________ ______ please comment Name & Position: ___________________________________________________ ______ Phone / Fax No.: ___________________________________________________ ______ Comments: ___________________________________________________… download now
2021_PDN-2021-004.pdf page 1 of 1 4.14F14a P RODUCT D ISCONTINUATION N OTICE PDN No.: 2021/004 IXYS product type: Type Recommended replacement VBO50-08NO7 VBO72-08NO7 VBO50-12NO7 VBO72-12NO7 VBO50-16NO7 VBO72-16NO7 VBO50-18NO7 VBO72-18NO7 Reason: Low demand Last time order date: 31.08.2021 Last time delivery date: 31.12.2021 Internal Reference: PO_2021-004 In case of any question, please contact Initiator Title/Function Date e-mail Ostmann PM 23.03.2021 hostmann@littelfuse.com IXYS Semiconductor GmbH Edisonstr. 15 D-68623 Lampertheim Phone: +49-6206-503-xxx Fax: +49-6206-503 -627 Customer response: (please fill in and return by e-mail, fax or mail w ithin 4 weeks) for further questions / information Company: ___________________________________________________ ______ please comment Name & Position: ___________________________________________________ ______ Phone / Fax No.: ___________________________________________________ ______ Comments: ___________________________________________________… download now
2021_PDN-2021-003.pdf page 1 of 1 4.14F14a P RODUCT D ISCONTINUATION N OTICE PDN No.: 2021/003 IXYS product type: Type Recommended replacement VUO35-12NO7 VUO62-12NO7 VUO35-16NO7 VUO62-16NO7 VUO35-18NO7 VUO62-18NO7 Reason: Low demand Last time order date: 31.08.2021 Last time delivery date: 31.12.2021 Internal Reference: PO_2021-003 In case of any question, please contact Initiator Title/Function Date e-mail Ostmann PM 23.03.2021 hostmann@littelfuse.com IXYS Semiconductor GmbH Edisonstr. 15 D-68623 Lampertheim Phone: +49-6206-503-xxx Fax: +49-6206-503 -627 Customer response: (please fill in and return by e-mail, fax or mail w ithin 4 weeks) for further questions / information Company: ___________________________________________________ ______ please comment Name & Position: ___________________________________________________ ______ Phone / Fax No.: ___________________________________________________ ______ Comments: ___________________________________________________… download now
2021_PDN-2021-002.pdf page 1 of 1 4.14F14a P RODUCT D ISCONTINUATION N OTICE PDN No.: 2021/002 IXYS product type: Type Recommended replacement VBO30-08NO7 VBO40-08NO6, VBO52-08NO7 VBO30-12NO7 VBO40-12NO6, VBO52-12NO7 VBO30-16NO7 VBO40-16NO6, VBO52-16NO7 VBO30-18NO7 VBO40-18NO6 (contact fact ory), VBO52-18NO7 Reason: Low demand Last time order date: 31.08.2021 Last time delivery date: 31.12.2021 Internal Reference: PO_2021-002 In case of any question, please contact Initiator Title/Function Date e-mail Ostmann PM 23.03.2021 hostmann@littelfuse.com IXYS Semiconductor GmbH Edisonstr. 15 D-68623 Lampertheim Phone: +49-6206-503-xxx Fax: +49-6206-503 -627 Customer response: (please fill in and return by e-mail, fax or mail w ithin 4 weeks) for further questions / information Company: ___________________________________________________ ______ please comment Name & Position: ___________________________________________________ ______ Phone / Fax No.: ___________________________________________________ ______… download now
2021_PCN_TR-20028.pdf PCN - Product Change Notification No.: Date: Originator: Subject: Related product: This document or attachment contains information that is proprietary to J.S.T. and shall not be used or shown without written permission. Description of change: schedule: step by step switching to new "GAN" product unification of products Reason of change: TR-20028 19.01.2021 A. Schaffarczyk JMC connector product lineup JMC plug and receptacle - pls. see the attached part number list - Identification of change: new part no. and description as per product list enclosed Selective spot gold plating (GAN) will become the only gold plating specification for JMC series. The performance is equivalent to that of conventional product. Packing specifications, packing unit and outer box qty. also will be changed. FB_7.5.3.2.3.1JST Deutschland GmbHKüferstr. 15D-73650 W interbach Phone: +49/7181/4007-0 e-mail: customer.service@jst.de www.jst.de register court: Amtsgericht Stuttgart HRB 280991CEO: Masao Yoshimura… download now
2021_PCN1098.pdf Product Change Notification (PCN ) Littelfuse, Inc. 8755 West Higgins Road, Suite 500 Chicago, IL 60631 USA (773) 628 -1000 1 November 12, 2021 PCN1098 : Product Change Notification for Littelfuse Discrete SOT -227 B package – Introduction of Laser Marking in Portugal Assembly Location To whom it may concern, Littelfuse would like to notify you of a change related to the marking of the SOT -227 B package manufactured in the Portugal assembly location . DESCRIPTION OF THE CHANGE : Starting from December 1 st, 2021 the marking of the SOT -22 7B package will change from inkjet marking to laser marking . A compar ison can be seen in Figure 1 and 2: Figure 1: IN KJE T marked SOT -227 B (old) Figure 2:LASER ma rked SOT -227B (new) A description of the marking is given in Figure 3 Figure 3: SOT -227B marking description 1. IXYS logo 2. Product name 3. UL sign (insulated types only) 4. DateCode YYWWG (YearYearWorkWeek), “G” Assembly Code 5. Assembly Lot Nr. (6 -digits) Form, fit, function… download now
2021_PCN1096.pdf Product Change Notice (PCN) Littelfuse, Inc. 8755 West Higgins Road, Suite 500 Chicago, IL 60631 USA (773) 628 -1000 1 August 25 , 202 1 PCN 1096 -UPDATED Detailed Description of Change As part of the Littelfuse IXYS Integrated Circuits Division’s (ICD) product lifecycle -management process, the following IXYS RF products have been transitioned to an “end -of-life” (EOL) status: • C-0010 -375 -501N21A • DE150 -102N02A • DE150 -501N04A • DE275 -102N06A • DE275X2 -102 N06A • DE275X2 -501N16A • DE375 -501N21A • DE375 -102N12A • DE475 -102N21A • IXRFD630 • IXRFD631 -NRF • IXZ210N50L2 • IXZ2210N50L2 NOTE: Although included in the previous issuance, the IXFH12N100F and IXFH6N100F will not be made obsolete. PCN1096 is the final EOL document for all remaining IXYS RF products. The initial IXYS RF product EOL began on January 18, 2019 with PCN1069. In order to satisfy any continuing requirements for these IXYS RF parts, IXYS Integrated Circuits Division is offering a non -cancelable last time… download now
2021_PCN-Weidmueller-13042021.pdf download now
2021_PCN-TR-21067_G21-06682.pdf PCN - Product Change Notification No.: Date: Originator: Subject: Related product: Should you have any issues within this PCN, please contact us within the next 30 days. No response will be deemed as your acceptance. This document or attachment contains information that is proprietary to J.S.T. and shall not be used or shown without written permission. TR-21067_G21-06682 25.10.2021 A. Schaffarczyk PAL / PNI terminal addition of material SPAL-001T-P0.5 / SPAL-002T-P0.5 SPNI-001T-P0.5 / SPNI-002T-P0.5 Reason of change: Identification of change: (KO) as identification symbol shall be suffixed to the current part number In order to improve the availability of material. following phosphor bronze material shall be added: additonal product: Material KLF-5 current product: Material C5191 The product performance remains unchanged. Description of change: schedule: step by step starting from production December 2021 FB_7.5.3.2.3.1 JST Deutschland GmbH Küferstr. 15 D-73650 W interbach Phone:… download now
2021_PCN-TR-21040_G21-03769_R21-0615_EH.pdf PCN - Product Change Notification No.: Date: Originator: Subject: Related product: Should you have any issues within this PCN, please contact us within the next 30 days. No response will be deemed as your acceptance. This document or attachment contains information that is proprietary to J.S.T. and shall not be used or shown without written permission. Description of change: schedule:Step by step starting end of 2021 for parts with new ma terial but without UL / CSA / TüV certification. Delivery for parts with new material with UL/CSA certification is planned starting step by step from beginning / mid of 202 2. TR-21040_G21-03769_R21-0615_EH 03.11.2021 A. Schaffarczyk EH female housing addition of material EHR-(*) * = circuit no. Reason of change: Identification of change: Until UL/CSA/TüV certification is completed, suffix (L) as identification symbol shall be added to the current part no . Example: EHR-2 (L) In order to improve the availability of the products. addition of resin… download now
2021_PCN-TF-00011-2021-Rev0.pdf Product Group: TF/Fri Dec 10, 2021/PCN-TF-00011-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT PTN Series Protective Coating Material Change DESCRIPTION OF CHANGE: Vishay Thin Film has qualified a new mechanical protective overcoat due to a discontinuance of the current material by our supplier as of September 30, 2021. Current raw material inventory of this overcoat material will be depleted at the end of March 2022. REASON FOR CHANGE: Supply Discontinuation EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: There will be no effect on quality, reliability, or performance. PART NUMBERS/SERIES/FAMILIES AFFECTED: PTN* VISHAY BRAND(s): Vishay Dale Thin Film,Vishay Thin Film TIME SCHEDULE: Start Shipment Date: Mon Feb 14, 2022 SAMPLE AVAILABILITY: Immediate PRODUCT… download now
2021_PCN-TF-00010-2021-Rev0.pdf Product Group: TF/Tue Oct 26, 2021/PCN-TF-00010-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT PNM Mechanical Protective Overcoat Material Change DESCRIPTION OF CHANGE: Vishay Thin Film has qualified a new mechanical protective overcoat due to a discontinuance of the current material by our supplier as of September 30, 2021 REASON FOR CHANGE: Supply Discontinuation EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: There will be no effect on quality, reliability, or performance. PART NUMBERS/SERIES/FAMILIES AFFECTED: PNM* VISHAY BRAND(s): Vishay Dale Thin Film,Vishay Thin Film TIME SCHEDULE: Start Shipment Date: Sat Jan 1, 2022 SAMPLE AVAILABILITY: Available upon request PRODUCT IDENTIFICATION: Lot number QUALIFICATION DATA: Available upon request This PCN is considered… download now
2021_PCN-TF-00009-2021-Rev0.pdf Product Group: TF/Wed Sep 15, 2021/PCN-TF-00009-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT FC Mechanical Protective Overcoat Material Change DESCRIPTION OF CHANGE: Vishay Thin Film has qualified a new mechanical protective overcoat due to a discontinuance of the current material by our supplier as of September 30, 2021 REASON FOR CHANGE: Supply Discontinuation EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: There will be no effect on quality, reliability, or performance. PART NUMBERS/SERIES/FAMILIES AFFECTED: FC1*, FC0*, FC2*, FC-*, VISHAY BRAND(s): Vishay Dale Thin Film,Vishay Thin Film TIME SCHEDULE: Start Shipment Date: Mon Nov 1, 2021 SAMPLE AVAILABILITY: Immediately PRODUCT IDENTIFICATION: Lot Number QUALIFICATION DATA: Available upon request This PCN is… download now
2021_PCN-TF-00008-2021-Rev0.pdf Product Group: TF/Mon Sep 13, 2021/PCN-TF-00008-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT 87017 (LCC 20-pin) Material Change DESCRIPTION OF CHANGE: Vishay Thin Film has qualified a new mechanical protective overcoat due to a discontinuance of the current material by our supplier as of September 30, 2021. REASON FOR CHANGE: Supply Discontinuation EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: There will be no effect on quality, reliability, or performance. PART NUMBERS/SERIES/FAMILIES AFFECTED: 87017* VISHAY BRAND(s): Vishay Dale Thin Film,Vishay Thin Film TIME SCHEDULE: Start Shipment Date: Mon Nov 15, 2021 SAMPLE AVAILABILITY: Immediate PRODUCT IDENTIFICATION: Lot number QUALIFICATION DATA: Available upon request This PCN is considered approved, without further… download now
2021_PCN-TF-00007-2021-Rev0.pdf Product Group: TF/Thu Sep 2, 2021/PCN-TF-00007-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT P-NS Series Protective Overcoat Material Change DESCRIPTION OF CHANGE: Vishay Thin Film has qualified a new mechanical protective overcoat due to a discontinuance of the current material by our supplier as of September 30, 2021. REASON FOR CHANGE: Supply Discontinuation EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: There will be no effect on quality, reliability, or performance. PART NUMBERS/SERIES/FAMILIES AFFECTED: P-* VISHAY BRAND(s): Vishay Dale Thin Film,Vishay Thin Film TIME SCHEDULE: Start Shipment Date: Tue Nov 2, 2021 SAMPLE AVAILABILITY: Immediate PRODUCT IDENTIFICATION: Lot Number QUALIFICATION DATA: Data is available upon request. This PCN is considered approved,… download now
2021_PCN-TF-00006-Rev0.pdf Pr oduct Group: Vishay Dale Thin Film /August 23 , 2021 /PCN -TF -00 00 6-2021 Rev 0 M/D55342 E/H (including T Level) Material Change DESCRI PTION OF CHANGE: Vishay Thin Film has qualified a new mechanical protective overcoat due to a discontinuance of the current material by our supplier as of September 30, 2021. CLASS IFI CATION OF CH ANGE: Direct Material REASON FOR CHANGE: Supply Discontinuation EXPECTED INFLU ENCE ON QUALITY/RELIABILITY/PE RFO RMANCE: There will be no effect on quality, reliability , or performance. PRODUCT CATEGO RY: Resistors PART NU MBERS/SERIES /FAMILI ES AFFECTED: M/D55342 E/H (including T Level) VISHAY BRAND (s): Vishay Dale Thin Film TIME SCHEDU LE: Start Shipment Da te: October 25 , 2021 QUALIF ICATION DATA: Data is available upon request. This PCN is co nsid ered app roved, witho ut further notific ation, unless we receive specific cus tomer co ncerns befo re October 23 , 2021 or as specified by co ntract. ISSUED BY: Bruce Guldin – Product Marketing… download now
2021_PCN-TF-00005-2021-Rev0.pdf Product Group: TF/Wed Aug 11, 2021/PCN-TF-00005-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT PLTT New Mechanical Protective Overcoat DESCRIPTION OF CHANGE: Vishay Thin Film has qualified a new mechanical protective overcoat due to a discontinuance of the current material by our supplier as of September 30, 2021. REASON FOR CHANGE: Supply Discontinuation EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: There will be no effect on quality, reliability, or performance. PART NUMBERS/SERIES/FAMILIES AFFECTED: PLTT* VISHAY BRAND(s): Vishay Dale Thin Film,Vishay Thin Film TIME SCHEDULE: Start Shipment Date: Mon Oct 18, 2021 SAMPLE AVAILABILITY: 08/11/2021 PRODUCT IDENTIFICATION: Lot Number QUALIFICATION DATA: Data is available upon request. This PCN is considered approved,… download now
2021_PCN-TF-00004-2021-Rev0.pdf Product Group: TF/Mon Aug 9, 2021/PCN-TF-00004-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT PLT/PLTU new mechanical protective overcoat DESCRIPTION OF CHANGE: Vishay Thin Film has qualified a new mechanical protective overcoat due to a discontinuance of the current material by our supplier as of September 30, 2021. REASON FOR CHANGE: Supply Discontinuation EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: There will be no effect on quality, reliability, or performance. PART NUMBERS/SERIES/FAMILIES AFFECTED: PLT0*, PLT1*, PLT2*, PLT-*, PLTU* VISHAY BRAND(s): Vishay Dale Thin Film,Vishay Thin Film TIME SCHEDULE: Start Shipment Date: Mon Oct 11, 2021 SAMPLE AVAILABILITY: 08/09/2021 PRODUCT IDENTIFICATION: Lot Number QUALIFICATION DATA: Data is available upon request. This PCN… download now
2021_PCN-TF-00003-2021-Rev0.pdf Product Group: TF/Mon Jul 26, 2021/PCN-TF-00003-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT PR100, PR135 & PR182 Material Change DESCRIPTION OF CHANGE: Vishay Dale Thin Film is replacing its mechanical protective overcoat in the manufacture of its PR Series product due to a discontinuance of the current materials by its supplier. New overcoat will have a difference in appearance only (darker shade of green) and is currently used on other products. Additionally, the composition of its NiCr resistor film is changing to our standard NiCr resistor film to improve manufacturability. REASON FOR CHANGE: Supply Discontinuation EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: There will be no effect on quality, reliability, or performance. PART NUMBERS/SERIES/FAMILIES AFFECTED:… download now
2021_PCN-TF-00002-Rev0.pdf Product Group: TF/Wed Jan 27, 2021/PCN-TF-00002-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Thin Film 0505 Case Size Carrier Tape DESCRIPTION OF CHANGE: Vishay Dale Thin Film will add an alternate source for its 0505 conductive carrier tape per EIA-481. The width and pitch of the tape remain the same. The cavity dimensions of second source carrier tape are 0.059 in. × 0.059 in. Material change from polycarbonate to polystyrene. REASON FOR CHANGE: Availability / 2nd source EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: None PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Thin Film TIME SCHEDULE: Start Shipment Date: Sun Aug 1, 2021 SAMPLE AVAILABILITY: Upon Request PRODUCT IDENTIFICATION: Shipments after… download now
2021_PCN-TC-002-Rev0.pdf Vishay Intertech nolo gy, Inc. Corporate Headquarters 63 Linco ln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Hermetically Sealed Solid Tantalum Capacitors: Conversion to Full Le adfree Version DESCRIPTION OF CHANGE: Eyelet se al washer contained lead and this prevented commercial Hermetics from full conversion to leadfree. In last time the alternative leadfree eyelet seal washer (along with relevant process adjustment) was successfully qualified. CLASSIFICATION OF CHANGE: Assembly/Process structure REASON FOR CHANGE: Following latest update of RoHS Annex III, an exemption 7 (a) that was used for commerci al leadfree Hermetics, will be expired in July -2021. Need to implement leadfree process before expirati on date. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: No influence… download now
2021_PCN-TC-001-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Change ESR and DF Datasheet limits for selected 597D/T97 ratings. DESCRIPTION OF CHANGE: Update data sheets with new electrical limits as sh own in the attached table. CLASSIFICATION OF CHANGE: Test Process REASON FOR CHANGE: Ensure stable supply chain for multi-anode ratings with tight DF/ESR limits EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANC E: No influence PRODUCT CATEGORY: Tantalum Capacitors PART NUMBERS/SERIES/FAMILIES AFFECTED: 597D687(1)010R(2)(3); 597D476(1)035R(2)(3); T97R687(1)010(2)(6)(5); T97R476(1)035(2)(4)(5) VISHAY BRAND(s): Vishay Sprague TIME SCHEDULE: Start Shipment Date: August 31, 2021 SAMPLE AVAILABILITY: Upon Request PRODUCT IDENTIFICATION: No… download now
2021_PCN-SM-SMC-16032021.pdf Piher Sensors & Cont rols SA Pol ίgono Industrial Municipal, Vial T2, No 22, 31500 Tudela, Navarra, Spain RM Navarra Tomo 551, Folio 7, Hoja 5.580 CIF/VAT ESA31169907 Tel: +34 948 820 450 Fax: +34 948 824 050 www.piher.net PCN rev 1 / Page 1 of 2 Product Change Notice Dear value d customer, Please be informed of the upcoming product change to the referred product famil ies . The plastic material for the external transparent housing is being discontinued by our supp lier . We are replacing it by a n alternative material , that features ide ntical properties . This new plastic has successfully passed all our validation tests . Following reliability tests have be en performed successfully : • Damp heat • Temperature cycling • Mechanical life • To rque nut Max • Insulation Visual, mechanical and electrical characteristics of the product remain unchange d. YOUR AFFECTED ARTICLES: • SM15V17 -103A2020 ----- 7---TAS • SMC10V10 -103A2020 -TA • SMC15V17 -103A2020 --2---TA SAMPLES AVAILAB ILITY… download now
2021_PCN-SIL-0482020.pdf Advisory – Datasheet Updates Product Group: Vishay Siliconix /October 28 th 2020 / PCN- SIL-0482020 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Part Numbers: Si7415DN-T1-GE3 Update from Datasheet Rev F to Rev G Dear Valued Customer: As a part of Vishay Siliconix commitment to Quality, we would like to extend to you a courtesy notification of a correction of datasheet for Vishay part number Si7415DN-T1-GE3. The objective of this Advisory is to correct erroneous Switching typical and max limits that happened when the data sheet format was converted from rev E to rev F. The change only applies to the datasheet and there are no changes to the materials or processes used in the manufacture of this part. This is an advisory and… download now
2021_PCN-SIL-033-2021-Rev0.pdf Product Group: SIL/Tue Dec 21, 2021/PCN-SIL-033-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Vishay Siliconix Announces Additional Conversion to Copper Bondwire for Commercial Power MOSFETs DESCRIPTION OF CHANGE: Vishay Siliconix announces the qualification for production of part numbers Si5517DU-T1-GE3, Si5922DU-T1- GE3, and Si5936DU-T1-GE3 with copper bond-wire in PowerPAK ChipFET Dual package. Manufacturing of these Low Voltage MOSFET with Copper wire will be added to Vishay Siliconix Copper wire product families that have been in production since November 2007. Changes: Change from Au wire to Cu wire. REASON FOR CHANGE: Part of continued quality improvement program EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: Enhancement to long-term product reliability. There… download now
2021_PCN-SIL-029-2021-Rev1.pdf Product Group: SIL/Sun Feb 20, 2022/PCN-SIL-029-2021-REV-1 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Vishay Siliconix Announces the Qualification of Single Gauge Lead-Frame for Commercial High Voltage MOSFETs Built in DPAK Package DESCRIPTION OF CHANGE: This notification is made to advise that below mentioned parts packaged in the DPAK built in ASE Weihai factory has been qualified Single Gauge (SG) lead-frame for manufacturing with die size up to 148milX118mils. This conversion is because Copper Foil supplier, Hitachi Metal, has decided to halt supplies of Copper Foil DPAK Dual Gauge (DG) strategically, which affects down-stream lead-frame stamping house ability to supply DG lead-frame to assembly house ASE Weihai. The qualification of SG lead-frame results no change to any dimension… download now
2021_PCN-SIL-029-2021-Rev0.pdf Product Group: SIL/Tue Aug 10, 2021/PCN-SIL-029-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Vishay Siliconix Announces the Qualification of Single Gauge Lead-Frame for Commercial High Voltage MOSFETs Built in DPAK Package DESCRIPTION OF CHANGE: This notification is made to advise that below mentioned parts packaged in the DPAK built in ASE Weihai factory has been qualified Single Gauge (SG) lead-frame for manufacturing. This conversion is because Copper Foil supplier, Hitachi Metal, has decided to halt supplies of Copper Foil DPAK Dual Gauge (DG) strategically, which affects down-stream lead-frame stamping house ability to supply DG lead-frame to assembly house ASE Weihai. The qualification of SG lead-frame results no change to any dimension of the POD. The SG lead-frame… download now
2021_PCN-SIL-025-2021-Rev0.pdf Product Group: SIL/Wed Jul 14, 2021/PCN-SIL-025-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT SQ2309ES Test Program Update and Datasheet Revision DESCRIPTION OF CHANGE: The SQ2309ES is not following our standard test procedure with respect to Unclamped Inductive switching (UIS also referred to as avalanche testing). For consistency we are making an adjustment to the test current, IAS, and to the associated data sheet specifications for IAS and EAS. The proposed new IAS value of -6.8A corresponds to the maximum recommended pulsed drain current value, IDM. The existing test point for IAS of -15A was incorrectly selected and specified on our data sheet. This adjustment ensures that the UIS capability of the devices shipped is in line with the maximum specified operating conditions… download now
2021_PCN-SIL-022-2021-Rev0.pdf Product Group: SIL/Thu Jul 1, 2021/PCN-SIL-022-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Vishay Siliconix Announces New Material of Conductive Die Attach Film (CDAF) for SC75A-3L package for Commercial Power MOSFETs DESCRIPTION OF CHANGE: Vishay Siliconix announces new material of conductive die attach for SC75A-3L package for Low Voltage Commercial power MOSFETs i.e. New Material for die attach (Conductive Die attach Film) for SC75A-3L package. This change is from eutectic to CDAF (Conductive Die Attach Film) for the Die Attach process, the wafer back metal material changes from CrAu to TiNiAg as required to support the CDAF process. CDAF provides consistent bond line thickness without die tilt, low bleed, low fillet height and full coverage. The SC75A-3L package physical… download now
2021_PCN-SIL-021-2021-Rev0.pdf Product Group: SIL/Thu Jul 1, 2021/PCN-SIL-021-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Vishay Siliconix Announces New Material of Conductive Die Attach Film (CDAF) for SC89-6L Dual package for Commercial Power MOSFETs DESCRIPTION OF CHANGE: Vishay Siliconix announces new material of conductive die attach for SC89-6L Dual package for Low Voltage Commercial power MOSFETs i.e. New Material for die attach (Conductive Die attach Film) for SC89-6L Dual package. This change is from eutectic to CDAF (Conductive Die Attach Film) for the Die Attach process, the wafer back metal material changes from CrAu to TiNiAg as required to support the CDAF process. CDAF provides consistent bond line thickness without die tilt, low bleed, low fillet height and full coverage. The SC89-6L Dual… download now
2021_PCN-SIL-018-2021-Rev0.pdf Product Group: SIL/Mon Jun 21, 2021/PCN-SIL-018-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Tower-MH Wafer Process Improvement and Green Mold Compound Conversion for NBED 80M Cell Commercial Power MOSFETs DESCRIPTION OF CHANGE: Vishay Siliconix announces to improve Tower-MH Wafer process and Green Mold Compound Conversion for NBED 80M Cell for Low Voltage Commercial power MOSFETs i.e. 80M TRENCHFET Technology in 6” WAFERS from TOWER-MH with hot top metal, LTO/SIN passivation, polyimide and green mold compound conversion from assembly sites. REASON FOR CHANGE: Part of continued quality improvement program EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: Enhancement to long-term product reliability and there will be no affect on the quality, reliability, or performance.… download now
2021_PCN-SIL-004-2021-Rev0.pdf Product Group: SIL/Wed Mar 24, 2021/PCN-SIL-004-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT New Material of Conductive Die Attach Film for Package SC89 6L Single for Commercial Power MOSFETs DESCRIPTION OF CHANGE: Vishay Siliconix announces new material of conductive die attach for SC89 6L Single Package for Low Voltage Commercial power MOSFETs i.e. New Material for die attach (Conductive Die attach Film) for SC89 6L Single package. This change is from eutectic to CDAF (Conductive Die Attach Film) for the Die Attach process, the wafer back metal material changes from CrAu to TiNiAg as required to support the CDAF process. CDAF provides consistent bond line thickness without die tilt, low bleed, low fillet height and full coverage. The SC89 6L Single package’s physical… download now
2021_PCN-SIL-001-2021-Rev0.pdf Product Group: SIL/Thu Jul 1, 2021/PCN-SIL-001-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Additional Commercial Power MOSFET Wafer Fabrication Capacity DESCRIPTION OF CHANGE: To meet increasing demand for Power MOSFET products, Vishay Siliconix is in the process of transfer of wafer fabrication on commercial 650M SG Low Voltage MOSFET products to foundry partner Tower Semiconductor. Tower Semiconductor has been a subcontracting partner of Vishay Siliconix since 1995. Founded in 1993, Tower Semiconductor is a worldwide supplier for foundry services of wafer manufacturing. Tower Semiconductor is located at Migdal Haemak, Israel, and has achieved ISO-9001, ISO41001 and TS6949 certifications. REASON FOR CHANGE: Capacity Expansion EXPECTED INFLUENCE ON… download now
2021_PCN-SIL-000423-2021-Rev0.pdf Product Group: SIL/Tue Nov 9, 2021/PCN-SIL-000423-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Additional test capacity for microBUCKs in MLP 5x5 package DESCRIPTION OF CHANGE: Vishay Siliconix has expanded test capacity of microBUCKs products to Vishay Philippines REASON FOR CHANGE: Addition of test capacity EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: There will be no effect on performance, quality or reliability. PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Siliconix TIME SCHEDULE: Start Shipment Date: Wed Feb 9, 2022 SAMPLE AVAILABILITY: November 15, 2022 PRODUCT IDENTIFICATION: Date Code QUALIFICATION DATA: Available upon Request This PCN is considered approved, without further notification,… download now
2021_PCN-SIL-000417-2021-Rev0.pdf Product Group: SIL/Mon Nov 8, 2021/PCN-SIL-000417-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Change of marking for microBUCKs in MLP 5x5 and MLP5x7 packages DESCRIPTION OF CHANGE: Vishay Siliconix has implemented a new marking for microBUCKs products, with option for a 2D barcode REASON FOR CHANGE: Enhanced production traceability EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: There will be no effect on performance, quality or reliability. PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Siliconix TIME SCHEDULE: Start Shipment Date: Wed Feb 16, 2022 SAMPLE AVAILABILITY: December 15th, 2021 PRODUCT IDENTIFICATION: Part Marking QUALIFICATION DATA: Comparison Data Attached This PCN is considered approved,… download now
2021_PCN-SF-276-2021-Rev0.pdf Product Group: SF/Tue Aug 31, 2021/PCN-SF-276-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Packaging change on RWM0634 and 0834 DESCRIPTION OF CHANGE: Resistor's Plastic Bag is remplaced by paper box and blister. Any impact on part number. REASON FOR CHANGE: Increase our quality level, avoid parts broken and eco-friendly EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: Better quality, avoid any break during transportation, PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Sfernice TIME SCHEDULE: Start Shipment Date: Mon Nov 1, 2021 SAMPLE AVAILABILITY: 11/01/2021 PRODUCT IDENTIFICATION: RWM0634 and RWM0834 QUALIFICATION DATA: Drop test This PCN is considered approved, without further notification, unless we… download now
2021_PCN-SF-271-Rev0.pdf Visha y Intertechnology, Inc. Corporate Head quarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # Sfernice Pigment Color Modification DESCRIPTION OF CHANGE: Due to the disc ontinuation of a pigment used for color ing , Vishay Sfernice is using a new pig ment in the protection layer of several resistors series . The blue color modification is barely visible to the naked eye . This is a minor modification and products specifications remain unchanged . CLASSIFICATION OF CHANGE: Molding/Coating . REASON FOR CHANGE: VISHAY Sfernice subcontractor discontinued a pigment used for coloration without not ice . EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFO RMANCE: The new pigment is used in a me ch anical protection layer and will have no impact on the form, fit,… download now
2021_PCN-SF-270-Rev0.pdf Page 1 of 2 Product Group: SFERNICE / April 7th, 2021 / PCN -SF -270 -20 21 Rev 0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # SFERNICE POSITION SENSORS ECS - ECO (Various sizes) CHANGE OF EPOXY RESIN DESCRIPTION OF CHANGE: The e poxy resin reference “A” is commonly used as a mechanical strengthen or structural fixation of various elements of our position sensors product s range (external or internal parts / sub -assemblies ). For series above and below mentioned, t he current reference “A” (blue) will be replaced by an equivalent performances epoxy resin reference “B” (blac k). CLASSIFICATION OF CHANGE : Direct Materials (Major) REASON FOR CHANGE : Obsolescence of the catalyst of the current epoxy ref. “A” .… download now
2021_PCN-SF-269-Rev1.pdf Page 1 of 3 Product Group: SFERNICE / March 29th 202 1 / PCN -SF -269-202 1 Rev 1 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # SFERNICE POSITION SENSORS 53 3-534 -535 -536 Series Introduction of a new lubricant DESCRIPTION OF CHANGE: Introduction o f an alternative lubricant for the lubrication of the sliding contact of the 533 -534 -535 -536 Series (all ohmic values) . CLASSIFICATION OF CHANGE : Direct Materials REASON FOR CHANGE : The current lubricant is obsolete. EXPECTED INFLUENCE ON QUALITY / RELIABILTY / PERFORMANCE : none PRODUCT CATAGORY : Resistor, variable PART NUMBERS / SERIES / FAMILIES AFFECTED : 533 -534 -535 -536 Series (all ohmic values - Standard and custom PNs – See list next page ) VISHAY… download now
2021_PCN-SF-267-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D ’S L A R G E S T M A N U F A C T U R E RS O F D I S C R E T E S E M I C O N D U C T O RS A N D P AS S I V E C O M P O N E N T Procedure # End of CECC Qualification for Vishay Sfernice RV, RCMA, RCMT, RCMS & RCMM Resistors DESCRIPTION OF CHANGE: Vishay Sfernice is ending the formal CECC Qualification for these mature standard products. There is no technical change, no EOL and these products have not been disqualified. Production processes will remain the same. Testing and periodic surveillance will remain too. There will be no impact on aspect (other than marking), Quality, Reliability or performances. CECC logos and types will be removed from parts, datasheets, acknowledgments, delivery notes & CoC. RV parts will be delivered according to EN 140401-804, RCM. parts will be delivered according to EN… download now
2021_PCN-SF-00283-2021-Rev0.pdf Product Group: SF/Fri Jan 14, 2022/PCN-SF-00283-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT ROT SERIES (Various Sizes) CHANGE OF EPOXY RESIN DESCRIPTION OF CHANGE: The epoxy resin reference “A” is commonly used as a mechanical strengthen or structural fixation of various elements of our position sensors products range (external or internal parts / sub-assemblies). For our ROT Series, the current reference “A” (blue) will be replaced by an equivalent performances epoxy resin reference “B” (black). REASON FOR CHANGE: Obsolescence of the catalyst of the current epoxy ref. “A” EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: None PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Sfernice TIME SCHEDULE: Start… download now
2021_PCN-SF-00273-2021-Rev0.pdf Product Group: SF/Fri Jun 25, 2021/PCN-SF-00273-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT 157 SERIES - STANDARD & SPECIAL PRODUCTS INTRODUCTION OF A NEW LUBRICANT DESCRIPTION OF CHANGE: Introduction of an alternative lubricant for the lubrication of the sliding contact of the 157 Series (all ohmic values). REASON FOR CHANGE: The current lubricant is obsolete. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: None PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Spectrol TIME SCHEDULE: Start Shipment Date: Mon Nov 8, 2021 SAMPLE AVAILABILITY: 08/31/2021 PRODUCT IDENTIFICATION: Date Code QUALIFICATION DATA: Data available upon request This PCN is considered approved, without further notification, unless we… download now
2021_PCN-SF-00272-2021-Rev1.pdf Product Group: SF/Wed Jun 23, 2021/PCN-SF-00272-2021-REV-1 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT VARIOUS POSITION SENSORS SERIES - PCB MATERIAL EVOLUTION DESCRIPTION OF CHANGE: Rationalization of the use of PCBs' raw material among suppliers. REASON FOR CHANGE: Maintenance of Business EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: None PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Sfernice,Vishay Spectrol TIME SCHEDULE: Start Shipment Date: Mon Sep 13, 2021 SAMPLE AVAILABILITY: 13/09/2021 PRODUCT IDENTIFICATION: Date Code QUALIFICATION DATA: Data is available upon request This PCN is considered approved, without further notification, unless we receive specific customer concerns before Fri Jul 23, 2021 or as… download now
2021_PCN-PT10-PTC10-16032021.pdf Piher Sensors & Cont rols SA Pol ίgono Industrial Municipal, Vial T2, No 22, 31500 Tudela, Navarra, Spain RM Navarra Tomo 551, Folio 7, Hoja 5.580 CIF/VAT ESA31169907 Tel: +34 948 820 450 Fax: +34 948 824 050 www.piher.net PCN rev 1 / Page 1 of 1 Product Change Notice Please be advised that we are upgrading the housing design for the PT10 AND PTC10 potentiometer series . This change is backward compatible with the current tooling design and it is including rotor position marks in the front and having a flat front surface with “PIHER ” tex t instead of “PIHER SPAIN ”. Mechanical and electrical specifi cations remain unchange d. This change will be effective starting Apri l 1st, 2021 . AFFECTED ARTICLES: PT10 and PTC10 series SAMPLES AVAILAB ILITY DATE : 01 -04-2021 FIRST DATE TO SHIP CHANGED PART S: From April 1 st 2021 gradually once old stock design is finished We t hank you in adva nce for your kind cooperation and remain at your disposition for any further information you mig ht req… download now
2021_PCN-PT6WV.pdf Piher Sensors & Cont rols SA Polίgono Industrial Municipal, Vial T2, No 22, 31500 Tu dela, Navarra, Spain RM Navarra Tomo 551, Folio 7, Hoja 5.580 CIF/VAT ESA31169907 Tel: +34 948 820 450 Fax: +34 948 824 050 www.piher.net PCNrev 1 / Page 1 of 2 Product Change Notice Please be advised that we are updating our potentio meter’s knobs offering. Some knobs are being replaced by new models to unif y part numbers. Please refer to the table below for the new replace ment knob versus the current part number that will be end of life: Current knob New knob To: All concern ed From: Jose Ignacio Álava Nº Pages: 2 PCN Ref Nº: PT6WV with assembled knob figs. 1, 2 and 4 / change request Date: 01 -02 -2021 http://www.piher.net/3d/PT6WVfig.6ref.6160.zip http://www.piher.net/3d/PT6WVfig.5ref6148.zip Piher Sensors & Cont rols SA Polίgono Industrial Municipal, Vial T2, No 22, 31500 Tu dela, Navarra, Spain RM Navarra Tomo 551, Folio 7, Hoja 5.580 CIF/VAT ESA31169907 Tel: +34 948 820 450 Fax: +34 948 824… download now
2021_PCN-PQ-21L01(E)-.pdf DEP -20-40 N Annex 2 (1/1) Mitsubishi Materials Corporation Ceramics Plant Process Change Application 工変 PQ -21L01(E) - November 16th ., 2021 ECOMAL EUROPE GmbH We planned to apply for process changes for the following parts. I am contacting you. Product name and part number Model Process name DTN thermistor Refer to Attachment 1 Change (Added) in curing/curative agent for coating resin Classification □1. Product Specifications ■ 2. Components/materials □ 3. Production location (change/addition) □4. Equipment/mold □5. Production conditions □6. Inspection □7. Logistic □8. Workers □9. Environment -related □10. Design change □11. Outsourcing destination □12. Others (Production end) Content of change Supplier Change (Added) of hardener for epoxy coating resin (used for protecting the sensor part ). * This is not a change in the resin manufacturer, but a change (addition) in the curing agent suppl ier. Current : Coat resin curing agent A After change: Coat resin hardener A or A’ * The… download now
2021_PCN-PKD047-20210804-00-A.pdf Produktänderungsmitteilung PCN -PKD047 -20210804 -00 -A Seit e 1 Technische Änderung zu r der CabinetLine (RJ45 CAT .6A Patchkabel LSZH) , verursacht durch das Hochwasser in Westdeutschland Sehr geehrte Damen und Herren , die unten aufgeführten Produkte unterliegen einer Produktänderung und werden temporär in einer geänderten Fassung geliefert. Bitte geben Sie diese Produktinformationen an Ihre Mitarbeiter und gegebenenfalls an Ihre Kunden weiter. 1. Ausgangss ituation 2. Technische Änderung Alte Ve rsion Neue Version • RJ45 Steckverbinder identisch • Die Mantelfarben können geringfügig abweichen • Die Übertragungsperformance CAT.6A gem. ISO/IEC 11801 2010 des Patchkabels bleibt im vollen Umfang bestehen • Entfall der UL 1863 Zulassung • Ein Merkblatt mit diesen Informationen ist in der Verpackung der überarbeiteten Artikel enthalten Die CAT.6 A Patchkabel der CabinetLine sind gemäß UL 1863 zugelassen . Das eingesetzte Kabel hat unter anderem die Eigenschaften: • UL 1863 Zulassung •… download now
2021_PCN-PCN1097.pdf October 1 2, 2021 PCN 1097 CPC1998J AC Power Switch - Assembly Facility Change To our valued customers , IXYS Integrated Circuits Division (ICD), now part of Littelfuse, would like to notify you that we will transfer and consolidate the assembly and test process of the CPC1998J to another assembly and test facility also in the Philippines. Below are the detail changes associate d with this transfer and consol idation : 1) Silicon Die : No Change 2) Assembly Bill of Materials : No Change 3) Assembly Process Flow : No Change 4) Assembly Equipment : Equal or Better 5) Test Equipment : No Change 6) Marking & Labeling : No Change 7) Form, fit, function change s : No Change 8) Part number changes : No Change 9) Effective date : October 2021 DESCRIPTION CHANGE (Y/N) REMARKS Unit Marking Logo N No change UL Sign N No change Trademark Sign N No change Product Name N No change Date Code N No change Assembly Line Cod e Y Kit number prefix change s from P to T Box Label Logo N No change Qty per… download now
2021_PCN-PCN1095.pdf Product Change Notice (PCN) Littelfuse, Inc. 8755 West Higgins Road, Suite 500 Chicago, IL 60631 USA (773) 628 -1000 1 May 1 9, 202 1 PCN 1095 Product Change Notification for Littelfuse Power Solid State Relays packaged in I4 -PAC , ISOP LUS -264, and Super SIP DCB -based assemblies . Detailed Description of Change IXYS Integrated Circuits Division (ICD), now part of Littelfuse, is chang ing the mold compound used for our i4 -PAC, ISOPLUS -264, and Super SIP packages. The mold compound for the i4 -PAC and ISOPLUS -264 packages is changing from the Samsung SL-7300JX to the Panasonic CV8400ZVS . The Super SIP package mold compound is changing from the Shin -Etsu KMC -2380G to the Panasonic CV8400ZVS . There is no impact on quality or reliability and n o data sheet changes. Parts numbers of the affected devices a re listed below. CPC1708J CPC1779J CPC1918J CPC1978J CPC40055ST CPC1709J CPC1786J CPC1927J CPC1979J CPC1718J CPC1788J CPC1967J CPC1986J CPC1727J CPC1908J CPC1968J CPC1988J… download now
2021_PCN-PCN1094.pdf Product Change Notice (PCN) Littelfuse, Inc. 8755 West Higgins Road, Suite 500 Chicago, IL 60631 USA (773) 628 -1000 1 May 6, 202 1 PCN 1094 Detailed Description of Change IXYS Integrated Circuits Division (ICD), now part of Littelfuse, has made specification changes to the Moisture Sensitivity and Soldering Profile segments contained within the Manufacturing Information section presented in the data sheets of the following devices : CPC1317P CPC1317PTR CPC1335P CPC1335PTR LAA110PL LAA110PLTR LAA120PL LAA120PLTR LAA125PL LAA125PLTR LAA127P LAA127PTR LAA127PL LAA127PLTR LBA110PL LBA110PLTR LBA127P LBA127PTR LBB127P LBB127PTR PAA110PL PAA110PLTR PAA127P PAA127PTR PAA140P PAA140PTR PAA150P PAA150PTR PBB150P PBB150PTR The Moisture Sensitivity Level (MSL) classification of the 8-pin SOIC (Flatpack) package has been changed from MSL 1 to MSL 3. In addition to the MSL classification change, the Classification Temperature (maximum body temperature) of this package has been reduced from 260°C… download now
2021_PCN-PCN1093.pdf Product Change Notice (PCN) Littelfuse, Inc. 8755 West Higgins Road, Suite 500 Chicago, IL 60631 USA (773) 628 -1000 1 April 20, 202 1 PCN 1093 Detailed Description of Change IXYS Integrated Circuits Division (ICD), now part of Littelfuse, has made a packaging change to the CPC3708CTR as described below: The reel diameter of the CPC3708 in the SOT -89 package , part number CPC3708CTR , is chang ing from 7 inches (1,000ea/Reel) to 13 inches (4,000ea/Reel) . Please see Appendix 1 for a graphical representation of the change . Additionally, because the number of units supplied with the larger reel is increasing, the minimum orderable quantity will increase from 1000 to 4000. These changes are effective immediately . The PCN number assigned to this action is PCN 1093 and must be referenced in any correspondence related to the change. Reason for Change The assembly subcontractor has phased out the smaller 7 inch diameter reel in favor of the larger 13 inch diameter reel. Contact Information… download now
2021_PCN-PCN1091.pdf Product Change Notice (PCN) Littelfuse, Inc. 8755 West Higgins Road, Suite 500 Chicago, IL 60631 USA (773) 628 -1000 1 April 21 , 202 1 PCN 1091 Detailed Description of Change IXYS Integrated Circuits Division (ICD), now part of Littelfuse, has change d the mold compound currently being used for the parts listed in Appendix 1. Epoxy mold compound Samsung SL -7300JX has been discontinued and is being replaced with Kyocera KE -300TS1 in the power RF components. These changes are effective immediately. There is no impact on quality or reliability. The PCN number assigned to this action is PCN 1091 and must be referenced in any correspondence related to the change. Contact Information For any questions related to this PCN notice, please contact Littelfuse, IXYS Integrated Circuits Division’s Customer Service Department as indicated below: Customer Service Department IXYS Integrated Circuits Division , now part of Littelfuse 78 Cherry Hi ll Dr. Beverly MA, 01915 Phone: 978 -524 -6700… download now
2021_PCN-PCMT468-20210618.pdf S ubjec t : A pr elim inar y re port on chan ge s 20 21 / 0 6 / 18 1. Products to be applied : PC MT 468 8T125 2. Cause of changing : - Advanced prevention of lead bent problem for “ㄱ forming lead product ”. 3. Effective date : A s o f J u n e 18 , 2 0 21 4. Contents of changing : Packing type change from “Bulk type” to “Tray type” (Please refer to attached pdf file for the detailed) Before After Product code : PCMT 468 8T125 Packing type : Bulk Product cod e : PC MT 468 S0194 Packing type : Tray download now
2021_PCN-OSI-1185-Rev0.pdf download now
2021_PCN-OSI-1182-Rev0.pdf Product Change Notification Product Group:Opto Sensors & IRDC 15-JUN-2021 / PCN OSI-1182-2021 Rev. 0 TITLE: Change in silver epoxy and Molding Compound for VSMB10940 and VSMB14940 Silver epoxy and molding compound has been changed for Performance improvement (better adhesive force with PCB and no yellowish phenomenon after IR flow). DESCRIPTION OF CHANGE: Direct Materials (Major) CLASSIFICATION OF CHANGE : We have changed the below materials for better perf ormance Silver epoxy (Better adhesive force with PCB) Molding compound (No yellowish phenomenon after IR flow). REASON FOR CHANGE : Improvement in reliability/performace expected. Nevertheless, we recommend to test the product in customers application. EXPECTED INFLUENCE ON QUALITY RELIABILITY / PERFORMANCE: Infrared Emitters PRODUCT CATEGORY : PART NUMBERS / SERIES / FAMILIES AFFECTED: VSMB10940 VSMB14940 VISHAY SEMICONDUCTORS VISHAY BRAND(s) : TIME SCHEDULE: Annotations about time schedule: Start Shipment Date: 15-SEP-2021 SAMPLES… download now
2021_PCN-OSI-1175-Rev0.pdf Product Change Notification Product Group:Opto Sensors & IRDC 12-MAR-2021 / PCN OSI-1175-2021 Rev. 0 TITLE: Change of Photodiode Chip in BPV10 and BPV10NF devices The old technology photodiode chip in our affected products will be replaced by latest technology PD chip developed and used als o in our automotive products. There are no other changes to the product s. The product performance meets the current specif ications accroding to datasheets. The parts have been re-qua lified according to Vishay strict reliability tests over 1000h. DESCRIPTION OF CHANGE: Wafer/Chip/Pellet Process/Structure CLASSIFICATION OF CHANGE : The Substrate material (4 Inch Silicon Substrate) h as been discontinued by supplier. REASON FOR CHANGE: No influence on quality, reliability or performance is expected. Nevertheless, we recommend to test the product in customers appli cation. EXPECTED INFLUENCE ON QUALITY RELIABILITY / PERFORMANCE: Photo Detectors PRODUCT CATEGORY : PART NUMBERS / SERIES / FAMILIES… download now
2021_PCN-OSI-1174-Rev0.pdf Product Change Notification Product Group:Opto Sensors & IRDC 12-MAR-2021 / PCN OSI-1174-2021 Rev. 0 TITLE: Change of wafer diameter for PIN diodes Due to discontinuation of 4" silicon wafers, 6" waf ers will be used for chip production. There is no change in performance, datasheet or for m factor of the affected components. DESCRIPTION OF CHANGE : Wafer/Chip/Pellet Process/Structure CLASSIFICATION OF CHANGE : 4" silicon wafers are discontinued by the supplier. REASON FOR CHANGE : No change in quality, reliability and performance. Nevertheless, we recommend to test the product in c ustomers application. EXPECTED INFLUENCE ON QUALITY RELIABILITY / PERFORMANCE: Photo Detectors PRODUCT CATEGORY : PART NUMBERS / SERIES / FAMILIES AFFECTED: BPW20RF BPW21R S6020P VISHAY SEMICONDUCTORS VISHAY BRAND(s) : TIME SCHEDULE: Annotations about time schedule: Start Shipment Date: 15-MAR-2021 SAMPLES AVAILABLE BEGINNING : 04-MAR-2021 We need samples for evaluation: Yes No If Yes return this form to… download now
2021_PCN-OPT-1202-2021-Rev0.pdf Product Group: OPT/Fri Dec 17, 2021/PCN-OPT-1202-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Change in Epoxy resin for TCND5000 DESCRIPTION OF CHANGE: Based on the force majeure event, our supplier cannot supply the material anymore. Therefore no last time buy possible. To ensure an uninterrupted supply, we qualified an alternative supplier immediately. REASON FOR CHANGE: Supplier discontinuation EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: No influence on quality and reliability expected. Nevertheless, we recommend to test the product in customers application. PART NUMBERS/SERIES/FAMILIES AFFECTED: TCND5000 VISHAY BRAND(s): Vishay Semiconductors TIME SCHEDULE: Start Shipment Date: Mon Jan 17, 2022 SAMPLE AVAILABILITY: 03.January 2022 PRODUCT IDENTIFICATION: Date… download now
2021_PCN-OPT-1199-2021-Rev0.pdf Product Group: OPT/Wed Nov 24, 2021/PCN-OPT-1199-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Change of wafer diameter for PIN diodes DESCRIPTION OF CHANGE: Due to discontinuation of 4" silicon wafers, 6" wafers will be used for chip production.There is no change in performance, datasheet or form factor of the affected components. REASON FOR CHANGE: 4" silicon wafers are discontinued by the supplier EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: No change in quality, reliability and performance PART NUMBERS/SERIES/FAMILIES AFFECTED: T1610P-SD-F, T1670P-SD-F, VISHAY BRAND(s): Vishay Semiconductors TIME SCHEDULE: Start Shipment Date: Mon Dec 13, 2021 SAMPLE AVAILABILITY: now PRODUCT IDENTIFICATION: date code QUALIFICATION DATA: available on request This PCN is considered… download now
2021_PCN-OPT-1197-2021-Rev0.pdf Product Group: OPT/Fri Aug 20, 2021/PCN-OPT-1197-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Change of PCB for TFBS4650.../TFBS4711... Series (IRDC) DESCRIPTION OF CHANGE: Introduction of a new PCB from a different supplier. No change of form/fit/function. No change of customers handling/assembly/inspection process required. REASON FOR CHANGE: To increase the security of long-term supply of our IRDC products. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: This material change does not impact the performance of the Product. The new PCB is qualified according to highest industrial and environmental Standards. The minimum ambient temperature range (operating) will be changed from -30degree celsius to -25degree celsius. We recommended to order samples to test the parts in… download now
2021_PCN-OPT-1191-2021-Rev0.pdf Product Group: OPT/Fri Dec 17, 2021/PCN-OPT-1191-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT TSMF1000, TSMF1020, TSMF1030 - Change in Chip DESCRIPTION OF CHANGE: A new chip generation will be introduced in TSMF1000, TSMF1020, TSMF1030 dome lens products. With the new chip, the devices will have more than 5 times increased radiant intensity and narrow emission angle. The high performance chip allows customers to achieve the required intensity with lower driving current. REASON FOR CHANGE: Introduction of new chip generation with improved electro-optical performance. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: No influence on quality and reliability expected. Nevertheless, we recommend to test the product in customers application. PART NUMBERS/SERIES/FAMILIES… download now
2021_PCN-OPT-1179-2021-Rev0.pdf Product Group: OPT/Thu Apr 22, 2021/PCN-OPT-1179-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Redesign of IL300 Linear optocoupler product series DESCRIPTION OF CHANGE: Vishay introduces a new design for the IL300 series. This design will use a new type of construction and new dies. As a result there is a slight difference in the dimensions of the package. The new package will be white in color and still conforms to the industry standards. There is no change in the manufacturing location. There are some electrical specification changes as well. The major ones are as follows: K1, K2 gain min and max IP1, IP2 typ. values VF typ. value Reduced K3 bin categories Rise and Fall time typ. values For a detailed comparison of the new and current design, please refer to document… download now
2021_PCN-OPT-1176-2021-Rev0.pdf Product Group: OPT/Fri Dec 17, 2021/PCN-OPT-1176-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT TCRT1000,TCRT1010,TCRT1010S - Change in Chip DESCRIPTION OF CHANGE: A new chip generation will be introduced in TCRT1000,TCRT1010,TCRT1010S. With the new chip, the devices will have more than 40% increased collector current. The high performance chip allows customers to achieve the required intensity with lower driving current. REASON FOR CHANGE: Introduction of new chip generation with improved electro-optical performance. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: No influence on quality and reliability expected. Nevertheless, we recommend to test the product in customers application. PART NUMBERS/SERIES/FAMILIES AFFECTED: TCRT1000, TCRT1010, TCRT1010S, VISHAY BRAND(s):… download now
2021_PCN-OPT-1136-2020-Rev0.pdf Product Group: OPT/Tue Oct 26, 2021/PCN-OPT-1136-2020-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Standardization of Au wire Diameter DESCRIPTION OF CHANGE: Changeover from 25um to 20um Au wire Diameter. REASON FOR CHANGE: In order to streamline the production and optimize the material supply chain, Vishay introduces a new Standardization of Au wire Diameter. The material is qualified to high Standards. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: The Quality / Reliability remains unchanged. It is not expected that any differences in technical characteristics or other properties will be observed. Consequently the datasheets remain unchanged. Nevertheless, we recommended to order samples to test the parts in your application. PART NUMBERS/SERIES/FAMILIES AFFECTED: Please… download now
2021_PCN-OMV-1184-Rev0.pdf Product Change Notification Product Group:Opto Modules & Visibles 10-JUN-2021 / PCN OMV-1184-2021 Rev. 0 TITLE: Qualification of alternate LED chips for PLCC and MiniSMD using GaAsP and GaP Technology Vishay is introducing alternate LED Chips for PLCC- and MiniSMD-LEDs using GaAsP and GaP Technology. There will be no Im pact on form fit and function. Due to low demand in automotive applicati ons, the qualification is not extended for AEC-Q10x release. Considering the capabilities of these long term est ablished die technologies regarding electrical life performance, the maximum allowed forward current will be limited to 20mA. For applications requiring higher brightness performance alternative parts using AlInGaP chip te chnology are available in Vishays Portfolio. DESCRIPTION OF CHANGE: Direct Materials (Major) CLASSIFICATION OF CHANGE : Obsoletion of currently used LED Chips. REASON FOR CHANGE : No influence on Quality, reliability and Performanc e expected. Products are qualified… download now
2021_PCN-MLC-00014-2021-Rev0.pdf Product Group: MLC/Thu Aug 5, 2021/PCN-MLC-00014-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Dielectric material change for several X7R ratings of VJ Commercial Series case size 0402, 0603, 0805 and 1210 DESCRIPTION OF CHANGE: Replace in listed part numbers of this PCN current X7R (Y) dielectric material with High K X7R material which is already in use for several other ratings. Range of change : 0402 - 10 nF (103) - 16 V (J) 0603 - 12 nF (123) - 50 V (A) and 100 V (B) 0603 - 15 nF (153) - 50 V (A) 0603 - 18 nF (183) - 50 V (A) 0603 - 22 nF (223) - 16 V (J) and 25 V (X) and 50 V (A) 0603 - 27 nF (273) - 16 V (J) and 25 V (X) and 50 V (A) 0603 - 33 nF (333) - 16 V (J) and 25 V (X) 0603 - 39 nF (393) - 16 V (J) and 25 V (X) 0805 - 47 nF (473) - 50 V (A) and 100 V (B) 0805 - 56… download now
2021_PCN-MLC-00012-2021-Rev0.pdf Product Group: MLC/Tue Jul 13, 2021/PCN-MLC-00012-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Change VJ1812A…3N to ELV compliant VJ1812A…3NG DESCRIPTION OF CHANGE: Change parts to use ROHS /ELV (end-of-life-vehicle) conform dielectric material. New part number code VJ1812A153GXAAT3NG, VJ1812A153JXAAT3NG, VJ1812A153KXAAT3NG. REASON FOR CHANGE: Comply with ROHS and ELV (end-of-life-vehicle) directives. Current part numbers still use already expired exemptions ROHS 7(c)-III and ELV 10(c). EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: Not applicable PART NUMBERS/SERIES/FAMILIES AFFECTED: VJ1812A153GXAAT3N, VJ1812A153JXAAT3N, VJ1812A153KXAAT3N, VISHAY BRAND(s): Vishay Vitramon TIME SCHEDULE: Start Shipment Date: Sun Jan 30, 2022 SAMPLE AVAILABILITY: Alternative products… download now
2021_PCN-MLC-00004-2021-Rev0.pdf Product Group: MLC/Thu Apr 22, 2021/PCN-MLC-00004-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Revise Dimension Limits for Hi-Rel E and F Term Products DESCRIPTION OF CHANGE: Increase maximum length dimension for selected silver-palladium (AgPd) terminated high-rel products. REASON FOR CHANGE: Match catalog dimensions to production capabilities EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: None PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Vitramon TIME SCHEDULE: Start Shipment Date: Thu Aug 12, 2021 SAMPLE AVAILABILITY: Start shipment date: 03-May-2021 PRODUCT IDENTIFICATION: By date code and Vishay Lot ID QUALIFICATION DATA: Not applicable This PCN is considered approved, without further notification,… download now
2021_PCN-MLC-00003-2021-Rev0.pdf Product Group: MLC/Tue Feb 23, 2021/PCN-MLC-00003-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Changes to Available Ratings of VJ0402…. VJ HIFREQ Series MLCC Termination Code “X” DESCRIPTION OF CHANGE: The termination material used on Vishay High Frequency Series 100% Matte Tin Finish 0402 body size is being change to a new material supplier. REASON FOR CHANGE: The use of the new material maximizes MLCC production efficiency, enhances production flexibility, and harmonizes automotive and commercial grades production EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: -No influence product quality or performance reliability. -No influence on product electrical parameters. -The new material is compliant with RoHS/REACH regulations PART NUMBERS/SERIES/FAMILIES AFFECTED: Please… download now
2021_PCN-MLC-00002-Rev0.pdf Product Group: MLC/Wed Feb 17, 2021/PCN-MLC-00002-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Changes to Available Ratings of VJ0402…. Commercial Series MLCC Termination Code “X” DESCRIPTION OF CHANGE: The termination material used on Vishay Commercial Series 100% Matte Tin Finish 0402 body size is being change to a new material supplier. REASON FOR CHANGE: The use of the new material maximizes MLCC production efficiency, enhances production flexibility, and harmonizes automotive and commercial grades production EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: -No influence product quality or performance reliability. -No influence on product electrical parameters. -The new material is compliant with RoHS/REACH regulations. PART NUMBERS/SERIES/FAMILIES AFFECTED: Please… download now
2021_PCN-LFPCN_PG0128.pdf To: Littelfuse Sales, Sales Support & Customers Valued Customer From: Littelfuse Product Management – Industrial Business Unit Subject: 600 V Distribution Block Alternative Material Color Document Number: LFPCN_ PG 012 8 Da te: 06/18/202 1 Wit h regards to the above ref eren ce, Litte lfuse would like to inform you about alternative material color utilized for construction o f 600 V Distribution Blocks. Lexan branded gray polycarbonate resin used for these products will not be available again until Septembe r 2021 at the earliest. To continue to provide the products affected by this shortage, the alternative was to convert to black Lexan polycarbon ate resin effective immediately . Black Lexan polycarbonate resin has the same physical properties as the gray version with the except ion of its color. This is a running change. There is no change to fit, f orm or fun ction of the pr oduct due to this ch ange in dimension ; also, there are No changes to agency certification . Lenax Gray… download now
2021_PCN-LFPCN-USA2021-001.pdf Product Change Notice (PCN) Littelfuse, Inc. 8755 West Higgins Road, Suite 500 Chicago, IL 60631 USA (773) 628 -1000 1 February 1 8, 2021 LFPCN USA2021 -001 Product Change Notification for Littelfuse MOSFETE DISCRETE and Discrete IGBT in ISOPlus247, SMPD, ISOPLUS264 and I4PAK To whom it may concern, Littelfuse would like to notify you of a change related to Molding Compound Change . DESCRIPTION OF CHANGE: As previously communicated to our customers, Samsung SDI has decided to exit the EMC material business and as a result we have qualified an alternat e molding compound for the packages ISOPlus247 , SMPD, ISOPLUS26 4 and I4PAK , manufactured at our assembly subcon. Form, fit, function changes: No Fit/Form/Function change with alternative EMC. Below is the package qualification data for ISOPlus247 , SMPD, ISOPLUS26 4 and I4PAK : Shipments with the alternative new molding compound will begin starting with WW09 . Please refer to next page for the list of affected part numbers. If you have… download now
2021_PCN-LFPCN-RC00056.pdf Littelfuse, Inc. 8755 West Higgins Road, Suite 500 Chicago, IL 60631 USA (773) 628 -1000 Subject: SE -601 and SE -70X Series Temporary Faceplate and Switch Change s Document: LFPCN_RC000 56 Date Released: October 25, 2021 Dear Valued Customer, Th is letter is to inform you of two temporary changes to the SE -601 and SE -70 X series product lines. Effective immediately, products listed below may include a grey faceplate insert and grey sele ctor switches , as shown in the photos below. This change is temporary, and the products will revert to the original black faceplate insert and black selector switches when supplies permit . There is no change to the product operation or certification. The following products are affected: SE -601 -0D SE -601 -0D -CC SE -601 -0T SE -601 -0T-CC SE -601 -0U SE -601 -0U -CC SE -701 -03 SE -701 -03-CC SE -701 -0D SE -701 -0D -CC SE -701 -0T SE -701 -0T-CC SE -701 -0U SE -701 -0U -CC SE -703 -03-00 SE -703 -03-02 SE -703 -0D -00 SE -703 -0D -02 SE -703… download now
2021_PCN-LFPCN-RC00055.pdf Littelfuse, Inc. 8755 West Higgins Road, Suite 500 Chicago, IL 60631 USA (773) 628 -1000 From: Littelfuse Industrial Business Unit Subject: SE -325 Units with Mixed Switch Profiles Document: LFPCN_RC0005 5 Date Released: July 13, 2021 Dear Valued Customer, This notice is to advise that SE -325 Series Neutral -Grounding -Resistor Monitors are temporarily being manufactured with selector switches that have mixed profiles . In Figure 1 below, t he ground -fault trip - level switch (GF) has the standard three -position flush switch, while the two -position MODE and RES switch es have an extended switch. There is no change to product operation. FIGURE 1. SE -325 GF , MODE , and RES switch es This temporary change affects the following p art numbers: SE -325 SE -325 D SE -325DN SE -325DNT SE -325DS SE -325DSN SE -325DSNT SE -325DST SE -325DT SE -325E SE -325EN SE -325ENT SE -325ES SE -325ESN SE -325ESNT SE -325EST SE -325ET SE -325N SE -325NT SE -325P SE -325S SE -325SN SE -325SNT SE -325ST… download now
2021_PCN-LFPCN-PG0126.pdf To: Littelfuse Sales, Sales Support & Customers Valued Customer From: Littelfuse Product Management – Industrial Business Unit Subject: MS Series Microswitch for PSR & PSX Series Fuse s - Dimensional Update Document Number: LFPCN_ PG0 126 Da te: 06/23/202 1 Wit h regards to the above ref eren ce, Litte lfuse would like to inform you about a dimensional update to MS Series Microswitch terminal . There isn’t any cha nge to o verall product dimension or mounting ; however, there is slight change to the terminal di stances due t o internal sw itch change , which is reflected in the drawing below. T here are No changes to product performance , fun ction or agency certification . Current MS3H 1000C Microsw itch Dim ensi on New MS3H1000C Microswitch Dim ensi on Current MS 7H1500C Microsw itch Dim ensi on New MS 7H1 500C Microswitch Dim ensi on Current MS XL20 00C Microsw itch Dim ensi on New MS XL20 00C Microswit ch Dim ensi on Reason This change is to mit igate the supp ly chain risk Going… download now
2021_PCN-LFPCN-PG0125.pdf To: Littelfuse Sales, Sales Support & Valued Customer s From: Littelfuse Product Management – Industrial Business Unit Subject: 0SP F 2 A Design Improvement Document Number: LFPCN_PG 0125 Da te: 04/28/20 21 With rega rds to the above ref erence d series , Littelfuse would like to inform you that there is an update on SPF 2 A design to improve product performance during shipping . The design change affects the fuse res istance slightly, there is no change to fit, form or function also there is no changes to agency certification and product markings . This is a running cha nge and will be implemented on May 30th , 202 1. Resistan ce change from 0.237 Ω to 0.1421 Ω We would apprec iate if you would provide this not ification to customers buying SPF 2 A fuses and forwar d this e -mail to anyone e lse whom we may have un intentionally neglected to copy . Product samp les are available upon request . Thank you fo r you r conti nu ed business. If you have any questions, or need a dditional… download now
2021_PCN-LFPCN-PG0124.pdf To: Littelfuse Sales, Sales Support & Customers Valued Customer From: Littelfuse Product Management – Industrial Business Unit Subject: LPHV Information Update Document Number: LFPCN_PG0 12 4 Da te: 04/26 /202 1 Wit h regards to the above ref erence, L itte lfuse would like to inform you about changes on interrupting rating for LPHV Holder series from 20 to 50 kA. There are NOT changes to Product Fit, Form or Function . Old Informat ion on Holder New Informat ion on Holde r Information Update Interrupting rating fro m 20 to 50 kA Going forwa rd / Timef rame The ef fective date of this change was April 29 th , 202 0. These changes comply and within IEC/UL PV Fuse stan dard specifications . I will appreciate i f you could also se nd this e -mail to anyone else whom I could have un -intentiona lly mi ssed ou t. Thank you fo r your conti nu ed business. If you have any questions, or need additional info rmation please contact our Littelfuse representative. Sincerely, Augu sto S ánchez… download now
2021_PCN-LFPCN-PG0122.pdf To: Littelfuse Sales, Sales Support & Customers Valued Customer From: Littelfuse Product Management – Industrial Business Unit Subject: PSR & PSX Outer Cap Alter native Material Document Number: LFPCN_PG0 12 2 Da te: 02 /19/202 1 Wit h regards to the above ref erence, Litte lfuse would like to inform you about changes that will be implemented to PSR & PSX related to use of alternate copper alloy (260 Brass) that also involves visual change in color of the outer - caps due to use of the alternate material . Reason of the Change is related to supply chain constraints in sourcing 220 Bronze copper alloy material . There are NO changes to Blades which are the primary current carrying path and will remain silver plated for superior conductivity and NO other changes to Product Fit, Form or Function . Upon implementation customers could receive products with both materials and there will be some visual color difference. Internal procedures will be implemented to ensure the use of one type of… download now
2021_PCN-LFPCN-PG0121.pdf To: Littelfuse Sales, Sales Support & Customers Valued Customer From: Littelfuse Product Management – Industrial Business Unit Subject: SPNH Product Update Document Number: LFPCN_PG0 121 Da te: 02 /12/202 1 Wit h regards to the above ref erence, Litte lfuse would like to inform you about changes that were implemented to SPNH Series pro duct Size 1XL , 2XL and 3L related to Nickel plating from the Outer -caps/Covers on the SPNH Series will be removed and replaced with matt finish surface and Packaging Inner Carton dimension change There are NOT changes to Blades which are the primary current carrying path will remain silver plated for superior conductivity and Not Ch anges to Product Fit, Form or Function . Old Outer Cap Version New Outer Cap Version Chan ges on Outer Cap Nickel Plated 1. Top outer -cap / cover changing from copper alloy Nickel plated material to copper alloy matt finish Cap (Un -plated) 2. Bottom outer -cap / cover changing from copper alloy Nickel plated material to… download now
2021_PCN-LFPCN-PG0120.pdf To: Littelfuse Sales, Sales Support & Customers Valued Customer From: Littelfuse Product Management – Industrial Business Unit Subject: 0SPF Fuse Label Update Document Number: LFPCN _PG0120 Da te: 02 /10 /2021 With rega rd to the above ref erence d se ries , Littelfuse would like to inform you that there is an update on 0SPF Fuse Produc t Label to include CE Logo . This is for customs c ompliance purpose. There is NO CHANGE in any way to the construction or performance of the fuse. Fuse L abel Fuse Lab el Upda te Comments 0SPF 1 to 20 A Fuse Label 0SPF 25 to 30 A Fuse Label 0SPF 1 to 20 A Fuse Label CE Logo 0SPF 25 & 30 A Fuse Label CE Logo Add CE logo to Fuse la bel 0SPF series 1 to 20 Am ps, and 25 to 30 amps Please see page 3 for a complete listing of affected part numbers Going forw ard / Timef rame Th e ef fectiv e date of this running change is December 14 2020 to February 5th , 202 1. I will appreciat e if you could also se nd thi s e -mail to anyone e lse whom I could have un… download now
2021_PCN-LFPCN-PG0119.pdf To: Littelfuse Sales, Sales Support & Valued Customer s From: Littelfuse Product Management – Industrial Business Unit Subject: 0TLS Fuse Label Update Document Number: LFPCN_PG 0119 Da te: 02/23 /20 21 With re gard to the above ref erence d series , Li ttelfuse would like to inform you that there is an update on 0TLS Fuse La bel to include TUV/IEC Logo . There is NO CHANGE in any way to the construction or performance of the fuse. Littelfuse has simply had third party testing performed on the product to IE C requirements and is adding this information to the fuse label. Current Fuse Label Updated Logo o n Fuse Label Updat ed Infor mation Add TUV/ IEC Logo The ef fectiv e date of thi s label update is expected to be April 1 st, 2021 . T his will be a running change a nd there may be products labeled on the implementation date using both versions of the label. We would appreciate if you would provide thi s not ification of a labe l update to customers buying TLS fuses and also forwar d… download now
2021_PCN-LFPCN-210930.pdf 8755 West Higgins Road, Product Change Notice (P CN) Suite 500 Chicago, IL 60631 USA www.littelfuse.com __________________________________________________________________________________ _ September 30 th, 2021 LFP CN210 930 Subject: Discontinuation notice of screw s attachment for TO -240 bipolar modules in ASIA and AMERICAS . To whom it may concern, Littelfuse would like to inform you that the screw s attachment of the Littelfuse TO -240 bipolar module s will be discontinued for deliveries in above mentioned regions . Reason for Change : • Following PCN#LFPCN210915 edited on September 15 th and to harmonize th e change to the other countries worldwide and avoid differences between countries , it has been decided to extend the PCN to all countries. • This change goes also towards an environmental desire to lighter our parcels of TO -240 modules and avoid shipping screws to customer s who don ’t use them . • The 3 M5x10 terminal screws for TO -240 were never been counted as part of the… download now
2021_PCN-LFPCN-210916.pdf Product / Process Change Notification N° LFPCN210916 N°202 1-04 Page 1 of 5 4.14F12c Date : September 1 6th, 2021 Dear Customer, Please find enclosed all details related to this PCN. This PC N is the conti nuation of our Backend Assembly location transfer, that started with the transfer of TO240 modules to Lipa last year (PCN #2020 -02) and that now announcing the transfer of the Y4 power modules to the same plant. Important information for your attention and according to JEDEC STANDARD “JESD46”: ◼ Please acknowledge receipt of this PCN . In your acknowledgement, you ca n grant approval or request additional information. ◼ Littelfuse will assume the change is acceptable if no acknowledgement is received within 30 days from the date of this PCN. Lack of any additional response withing 90 days of PCN issuance further constit utes acceptance of change. Your prompt reply will help Littelfuse to assure a smooth and well executed transition. Your attention and response to this ma tter is… download now
2021_PCN-LFPCN-210915.pdf 8755 West Higgins Road, Product Change Notice (P CN) Suite 500 Chicago, IL 60631 USA www.littelfuse.com ____________________________________________________________________________________________ _ September 15 th, 2021 LFP CN210 915 Subject: Notice of discontinuation of screw s attachment for TO -240 bipolar modules in Europe, Middle East and Africa (EMEA) . To whom it may concern, Littelfuse would like to inform you that the screw s attachment of the Littelfuse TO -240 bipolar module s will be discontinued for deliveries in EMEA regions . Reason for Change : • Starting 1st July 2021, the production of TO -240 package s has been fully moved to Philippines (Lipa). Due to the limited resources of the Littelfuse EMEA warehouse, the TO -240 module s will NO longer be attached with screws as complimentary accessories for EMEA destination customers . • The 3 M5x10 terminal screws for TO -240 were never been counted as part of the module cost for our customers. For those customers who still… download now
2021_PCN-LFPCN-210630.pdf 8755 West Higgins Road, Product Change Notice (P CN) Suite 500 Chicago, IL 60631 USA www.littelfuse.com ____________________________________________________________________________________________ _ June 30 th, 2021 LFP CN2106 30 Discontinuance Notice for Littelfuse Bipolar and IGBT power modules To whom it may concern, Littelfuse would like to notify you of a discontinuance of Bipolar and IGBT power modules. Reason for Change : Low demand Effective date : June 30 th, 2021 Last time buy : N/A EOL Diode Modules LF Europe CROSS Part EOL IGBT Modules LF Europe CROSS Part MD16110A -BM2MM MDMA110P1600TG MG12100W -XN2MM MIXA100W1200TEH MD16130S -BM2MM N/A MG1240H -XBN2MM MIXA30WB1200TED MD16160S -BM2MM MDD142 -16N1 MG06200S -BN4MM N/A MD16160S -DKM2MM N/A MG12450WB -BN2MM MIXA450PF1200TSF MD16180S -BM2MM MDMA180P1600YD MG1215H -XBN2MM MIXA10WB1200TED MD16180S -DKM2MM N/A MG1250H -XN2MM MIXA40W1200TED MD16200S -BM2MM MDMA210P1600YD MG12225WB -BN2MM MIXA225PF1200TSF MD1690A -BM2MM… download now
2021_PCN-LFPCN-41390.pdf 1 LFPCN# 41390 Feb 1st 202 1 To: Valued customers From: Littelfuse Product Management Subject: Manufacturing Site Extension for Polyfuse® Radial Leaded PPTC As part of production contingency plan, Littelfuse is going to add one more manufacturing site for Polyfuse® Radial Leaded PP TC, the new manufacturing site locate s in Kunshan City , China . All affected products will be fully qualified in the new site in accordance with established performance and reliability criteria. Full qualification data and/or samples will be available upon request . As a result of Littelfuse Global Label ing Standardiz ing effort, the new plant will be using Littelfuse Standard lab el format which is slightly different on format but maintaining all the requested content field , please refer to below comparison . Label from Existing Plant Label from New Plant Size 60mm*40mm 100mm*50mm Picture 2 Timeframe The new site will start to build parts from Mar 1st 2021 . Customers can expect products from both sites… download now
2021_PCN-Housing-PS10-PSC10.pdf Piher Sensors & Controls SA Polίgono Industrial Municipal, Vial T2, No 22, 31500 Tudela, Navarra, Spain RM Navarra Tomo 551, Folio 7, Hoja 5.580 CIF/VAT ESA31169907 Tel: +34 948 820 450 Fax: +34 948 824 050 www.piher.net Page 1 of 1 Product Change Notice To: All concerned From: Jose Ignacio Álava Date: April 12 th, 2021 No. of pages 1 PCN -Ref. No.: New housing design for the P S10 and P SC10 serie s Please be advised that we are upgrading the housing design for the P S10 and P SC10 potentiometer series. This cosmetic change is backward compatible with the current tooling design and it is including rotor position marks in the front and “PIHER” text instead of “PIHER SPAIN”. Mechanical and electrical specifications remain unchanged. AFFECTED SERIES : PS10 and P SC10 SAMPLES AVAILABILITY DATE : May 17th, 2021 FIRST DATE TO SHIP CHANGED PARTS: July 1 st, 202 1 We thank you in advance for your kind cooperation and remain at your disposition for any further information you might require.… download now
2021_PCN-G21-05870_R1_E.pdf download now
2021_PCN-FC-006-2021-Rev0.pdf Product Group: FC/Tue May 25, 2021/PCN-FC-006-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Introduction of Alternative Metal Spraying Method DESCRIPTION OF CHANGE: Currently Vishay India performs a two-step metal spraying process in the production of Film Capacitors. The first step uses an arc (electrically melting of metal) process where the second step, depending on part number, uses either an arc or gas, to melt and deposit the metal. In order to create flexibility due to the limited availability of oxygen used in the gas process, Vishay intends to use the arc process for the second layer for all parts until the oxygen supply returns to normal. It is important to note that ARC metal spray in an approved process on multiple part numbers that has been in production, both on… download now
2021_PCN-Expansion-of-production-processes-SC-SMT.pdf W eidmüller GmbH & Co. KGKlingenbergstraße 26D-32758 DetmoldT +49 (0) 52 31 14 28-0 F +49 (0) 52 31 14 28-1 16weidmueller@weidmueller.deF +49 (0) 52 31 14 28-116 Seite 1 von 1Detmold,17.09.2021Irina Steinkemper+49 (0) 52 31 14 28-256Irina.Steinkemper@weidmueller.comTKommanditgesellschaftSitz: DetmoldRegistergericht Lemgo HRA 4183USt-ID-Nr. DE124599901W EEE-Reg.-Nr. DE73937473Komplementärin: W eidmüller Führungs GmbH Sitz: DetmoldRegistergericht Lemgo HRB 5717Geschäftsführer: Dr. Timo BergerDr. Christian von TollBankverbindungen:Commerzbank AGIBAN: DE03 4808 0020 0283 2884 00BIC: DRESDEFF480Deutsche BankIBAN: DE73 47670023 0437 4922 00BIC: DEUTDE3B476Postgiro HannoverIBAN: DE94 2501 0030 0088 9443 01BIC: PBNKDEFFXXXTechnische ModifikationSehr geehrte Damen und Herren,ECOMAL Europe GmbHEinkauf ElektrotechnikWilhelm-Schauenberg-Straße 779199 KirchzartenKd.-Nr. 0000043547als innovatives Unternehmen streben wir ständig nach Verbesserungen und suchen nach W egen, unsere Produkte für Sie… download now
2021_PCN-ESW490-40.pdf September 1 8 th, 2 021 PCN # ESW490- 40 – Thyristor /Diode I4Pac& GUFP Packaging Location Transfer To our valued customers , Littelfuse would like to notify you that we will transfer our backend assembly process of Thyristor/Diode products I4Pac & GUFP Package to our new inhouse assembly factory in Lipa, Philippines. This brand- new assembly factory is to fulfill our strategy to invest in state- of-the- art power semiconductor assembly capabilities to dramatically improve our service levels to customers . Our target is to build this factory as a world class facility with automated, error proof processes to meet the highest quality standards . Contact our local Sales team in case you would like to understand more about this new factory. Below is the detail changes associate with this Assembly Location change: 1) Silicon Die: No change 2) Backend Assembly Bill of Materials: No change 3) Backend Assembly Process Flow : No change 4) Backend Assembly Equipment : Equal or better 5) Marking… download now
2021_PCN-ESW490-37.pdf Apr 13 st, 2021 PCN # Alternate Assembly Location for Thyristor SOT23_SOT89_SOT223 package To our valued customers , Littelfuse would like to notify you that we qualified alternate assembly location of Thyristor SOT23 , SOT89, SOT223 package products with BCP consideration. Detail affected product list please refer to attached file. All affected products have been fully qualified in accordance with established performance and reliability criteria. The attached pages summarize the qualificati on results. Full qualification data and/or samples will be available upon request. Form, fit, function changes: Slight dimension difference but all in JEDEC spec Part number changes: None Effective date: July 13 th, 2021 Replacement products: N/A Last time buy: N/A This notification is for your information and acknowledgement. If you have any other questions or concerns, please contact your local sales team or Zhiwei Wang, Power Thyristor/Diode Discrete , P roduct Marketing Manager. We value your… download now
2021_PCN-ESTA-002-2021-Rev0.pdf Vishay Europe Sales GmbH Hofmark-Aich-Str. 36, D-84030 Landshut, Germany, Ph one +49 (0) 871 86 0 Fax +49 (0) 871 86 2512 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRET E SEMICONDUCTORS AND PASSIVE COMPONENTS Vishay ESTA LVAC Power Capacitors PhMKP(g) Series I P00, 84mm diameter, Change to discrete Discharge Resisto r Unit DESCRIPTION OF CHANGE: The previous thickfilm ceramic discharge resistor device will be replaced by a discrete component discharge resistor unit in a plastic casing. CLASSIFICATION OF CHANGE: Replacement with same technical behavior. REASON FOR CHANGE: Improvement. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANC E: More robust resistor unit for the demanding handling and operation in the field. PRODUCT CATEGORY: Low Voltage AC Power Capacitors of PhMKP, PhMKPg an d ACMKP series. PART NUMBERS / SERIES / FAMILIES AFFECTED: PhMKPXXX.X.XX,XX-84, 5341-444XX-XX, 5341-436XX-XX a nd 5348-436XX-XX PhMKPgXXX.X.XX,XX-84, 5343-440XX-XX, 5343-435XX-XX and… download now
2021_PCN-ESTA-001-2021-Rev0.pdf Vishay Europe Sales GmbH Hofmark-Aich-Str. 36, D-84030 Landshut, Germany, Ph one +49 (0) 871 86 0 Fax +49 (0) 871 86 2512 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRET E SEMICONDUCTORS AND PASSIVE COMPONENTS Change of ESTAprop / ESTAdry LVAC Tubular Capacitors, IP20, Diameter 116/136 mm DESCRIPTION OF CHANGE: As part of our continuous improvement process and t o align with our existing design of 64 and 84mm diameter capacitors, we will change the design of o ur LVAC capacitors ESTAprop and ESTAdry with diameter of 116/136 mm. With this change we will in troduce those capacitors with a new aluminum alloy lid and crimped edge to replace the former welding seam . CLASSIFICATION OF CHANGE: Change of Aluminum top and crimping on the casing. REASON FOR CHANGE: Product line improvement based upon customer input. EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMAN CE: Improved sealing by increased diameter at the crimp ed edge from previous 116 to 120.5 mm and 136 to 140.2… download now
2021_PCN-Embossed-Tape-PS15-PSC15.pdf Piher Sensors & Controls SA Polίgono Industrial Municipal, Vial T2, No 22, 31500 Tudela, Navarra, Spain RM Navarra Tomo 551, Folio 7, Hoja 5.580 CIF/VAT ESA31169907 Tel: +34 948 820 450 Fax: +34 948 824 050 www.piher.net Page 1 of 2 Product Change Notice To: All concerned From: Jose Ignacio Álava Date: July 19th, 2021 No. of pages 2 PCN -Ref. No.: New embossed tape for the P S15 and P SC1 5 serie s Please be advised that we are changing the embossed tape for the packaging for the PS15 and PSC15 15mm SMD potentiometers famil ies . Our supplier has requested us to remove the pocket hole in the carrier tape because they are facing problems with the punching process which is blocking their manufacturing lines . Their current workload together with COVID restrictions in the area where they are located , has forced them to discontinue the carrier tape with pocket hole. The pocket hole is an optional characteristic in the IEC 60286 -3:2007 Standard. Materials and o ther m echanical and… download now
2021_PCN-ECR202105004.pdf SD/RD-003 Form 6-F Engineering Change Notification （ECN ） ECN No.: ECR202105004 Customer: Date: 26.05.2021 Change Items: █Design □Process □Product discontinue □Others Subject of Change: All Diodes from external suppliers will be changed t o Dosemi Diodes in all 1200V module series. Description of change: All FWD in all 1200V module series will be changed t o DOSEMI Diodes. DOSEMI Diodes are produced in a foundry in Shanghai especially for Starpower. Due all static and dynamical values of the Dosemi D iodes are inside the limits of the actual 1200V modules datasheets, the datasheets will be un changed. The P/N of all the 1200V modules will be unchanged. Accompanying documents: 100A, 1200V FRD comparison. Reason of change: To respond more flexibly and quickly to customer re quests, Starpower is using DOSEMI Diodes. First samples available actual Delivery time 6 weeks Last order date of unchanged product 30 th of September, 2021 Last delivery date of unchanged product 31 th of… download now
2021_PCN-ECN202105001.pdf SD/RD-003 Form 6 -F Engineering Change Notification （ ECN ） ECN No.: EC N202105001 Customer: Date: Change Items: █Design █Process □Product discontinue □Others Subject of Change: C2 Module 4DBC change to 2DBC solution Description of change: Figure 1. Before change: Using 4 DBCs constitute circular topology layout Figure 2 . After change: Using 2 DBCs constitute circular topology layout Reason of change: At present, 1200V/150A,1200V /450A and 1700V series are the structure of Figure 2, while 1200V/ 200A,1200V/300A and 1200V /400A series are the structure of Figure 1 .In order to unify design, to manage production easier, so the structure of Figure 1 is changed to the structure of Figure 2. C2 modules (62 mm)are involved in such change . First samples available 30 th of May, 2021 Delivery t ime 6 weeks Last order date of unchanged product 30 th of June, 2021 Last delivery date of unchanged product 30 th of July, 2021 Hereby notify the above: StarPower Semiconductor Ltd. 20 21-5-25 Respond… download now
2021_PCN-DR-0007-2021-Rev0.pdf Product Group: DR/Thu Apr 29, 2021/PCN-DR-0007-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Packaging Change for Military DFM (M83401/03) and commercial DFP network resistors. DESCRIPTION OF CHANGE: Change from tube packaging to waffle packaging REASON FOR CHANGE: Lack availability of tube packaging. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: No change in component manufacturing materials. PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Dale TIME SCHEDULE: Start Shipment Date: Sat Oct 30, 2021 SAMPLE AVAILABILITY: Immediate PRODUCT IDENTIFICATION: DFM / DFP QUALIFICATION DATA: None This PCN is considered approved, without further notification, unless we receive specific customer concerns before Thu May… download now
2021_PCN-DR-00021-2021-Rev1.pdf Product Group: DR/Wed Feb 9, 2022/PCN-DR-00021-2021-REV-1 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT WSL0805 & WSL0805-18 Change to Welded Construction DESCRIPTION OF CHANGE: WSL0805 and WSL0805-18 product termination will change from a copper clad technology to a welded copper technology. This change will conform the 0805 size to the other WSLx sizes which currently use a welded copper terminal. Revision 0: Stated no change to form fit function performance or the data sheet for the product. Revision 1: Revises Fit with small change to height dimension for all values which will be 0.016”±0.005”. Previous dimension was 0.013”±0.005” REASON FOR CHANGE: The construction of the WSL0805 and WSL0805-18 terminal bonding to the resistance element will be changed from a copper clad to a welded… download now
2021_PCN-DR-00021-2021-Rev0.pdf Product Group: DR/Mon Dec 20, 2021/PCN-DR-00021-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT WSL0805 & WSL0805-18 Change to Welded Construction DESCRIPTION OF CHANGE: WSL0805 and WSL0805-18 product terminal will change from a copper clad technology to a welded copper technology. This change will conform the 0805 size to the other WSLx sizes which currently use a welded copper terminal. This change will have no change to form fit function performance or the data sheet for the product. REASON FOR CHANGE: The construction of the WSL0805 and WSL0805-18 terminal bonding to the resistance element will be changed from a copper clad to a welded copper terminal. This allows for overall better performance and utilization of internal processing. This change is required due to previous… download now
2021_PCN-DR-00018-2021-Rev0.pdf Product Group: DR/Wed Sep 8, 2021/PCN-DR-00018-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT WSC/WSN 2515 W1 Terminal Dimension Tolerance DESCRIPTION OF CHANGE: WSC/WSN 2515 (only) terminal dimension tolerance on the datasheet is being increased from ± 0.005” (0.127) to ± 0.01” (0.254 mm). No other sizes of the datasheet are being changed. There is no change in the process. REASON FOR CHANGE: The construction, process, or equipment are not being changed, only the dimension tolerance. The swaged lead construction is a mechanical deformation process that creates slightly larger variation tolerances than were documented on the datasheet. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: No Change PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the… download now
2021_PCN-DR-00017-2021-Rev0.pdf Product Group: DR/Wed Sep 8, 2021/PCN-DR-00017-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT WSC/WSN High Temperature Exposure DESCRIPTION OF CHANGE: High Temperature Exposure and power derating curves are being decreased from 275 °C to 175 °C. REASON FOR CHANGE: High temperature exposure rating was based on equivalent temperature exposure rating of the internal subassembly instead of the WSC/WSN SMD assembly. The reduction is to reflect the limitations of the standard Lead Free solder SMD process and FR4 materials used in customer applications for testing and qualification. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: Performance rating is decreased for high temperature capability and reduced power rating for temperatures above 70°C. There are no changes to the… download now
2021_PCN-DR-00014-2021-Rev0.pdf Product Group: DR/Tue Jun 15, 2021/PCN-DR-00014-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT WSF2515 - Subassembly Production Equipment Move DESCRIPTION OF CHANGE: Subassembly Production equipment of the WSF2515 product is being moved from Vishay Dale Bermudez facility to the Vishay Dale Bravos facility; both facilities are located within Juarez, Mexico. The affected production lines will be shut down and moved, which will result in 3 - 4 months of equipment downtime during move, setup, and product qualification build/testing. It is recommended to place orders in advance of 6 months to cover this down time period. (There is no change for WSF4527 product.) REASON FOR CHANGE: Consolidation of the production equipment for the WSF2515 to the same facility in Juarez, Mexico.… download now
2021_PCN-DR-00011-2021-Rev0.pdf Product Group: DR/Thu May 6, 2021/PCN-DR-00011-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT WSL2512 / WSL2512-18 / WSLP2512 Manufacturing Reel Cure Process DESCRIPTION OF CHANGE: Juarez Mexico process is being updated to standardize all coating cure processes across all locations. The Mexico change makes it consistent with the coating cure process of USA and Israel. The only difference is that the parts are cured on a material processing reel instead of a tray process for oven cure. It does not change the process flow only the configuration of the material at that step in the process. REASON FOR CHANGE: Standardize all coating cure processes across all locations. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: None PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see… download now
2021_PCN-DR-00009-2021-Rev1.pdf Product Group: DR/Mon May 3, 2021/PCN-DR-00009-2021-REV-1 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT WSL1206 / WSL1206-18 / WSLP1206 - Reel Cure Process DESCRIPTION OF CHANGE: Juarez Mexico process is being updated to standardize all coating cure processes across all locations. The Mexico change makes it consistent with the coating cure process of USA and Israel. The only difference is that the parts are cured on a material processing reel instead of a tray process for oven cure. It does not change the process flow only the configuration of the material at that step in the process. REASON FOR CHANGE: Standardize all coating cure processes across all locations. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: Not Applicable PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see… download now
2021_PCN-DR-00009-2021-Rev0.pdf Product Group: DR/Thu Apr 22, 2021/PCN-DR-00009-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT WSL1206 / WSL1206-18 / WSLP1206 - Reel Cure Process DESCRIPTION OF CHANGE: Juarez Mexico process is being updated to standardize all coating cure processes across all locations. REASON FOR CHANGE: Standardize all coating cure processes across all locations. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: No Change PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Dale TIME SCHEDULE: Start Shipment Date: Tue Mar 29, 2022 SAMPLE AVAILABILITY: Available upon request. Please include notes with sample request to identify this PCN# regarding reel cure process parts produced in Mexico. PRODUCT IDENTIFICATION: Manufacturing… download now
2021_PCN-DR-00008-2021-Rev0.pdf !"#$%&'((#')*%+&', - $(.($/$("012345674839:;<=;7>?4 @1AA B1CDEDD #'(F0G0BB 1H$IF0 G@0 0AJ :::D>3K;<D56L MNOMHP.OQMRSTUVSWROVPXWNYHW-PYRORVMHT&V-ROP OVOX&-MNTY-PMRVWNT WVV& O-MX MNONP Z[\]^_`a]`b\]cd\efcga]^`hie\fai]`id`jak[\l`mahn\co_ _ pqrstucvch\gtZ[\kkak`mic]f`wag_nic]x`q_kakfigky z z s{|Zqr}ur~`~`Zp{`
z
z
zz zzz
z
z
zzzzz
z
z
zzz
z
z zzz
z
z zzz
zzz
zz z
z
zzzzzz z ¡¢£z ¡¤£ ¡¥£ ¡¦£ ¡¡£z §¢£ §¤£ §¥£ §¨£ ©ª £z«¬£z«¬®£zª«¢£zª«¤£zª«£zª« £z¯¬°±£z¯¬°²£z ª³£z´ª£ µ £zµ ®£zª±«£zª±«®£zª± £zª± ®£zª¬«£zª¬«®£zª¬ £zª¬ ® z z q{|~`~q`Zp{`®z
zzz
… download now
2021_PCN-DR-00006-2021-Rev0.pdf Product Group: DR/Thu Mar 4, 2021/PCN-DR-00006-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT WSL2010 / WSL2010-18 / WSLP2010 Addition of Manufacturing Site DESCRIPTION OF CHANGE: Juarez Mexico is being added as an additional manufacturing location. Production will continue in the existing locations in Columbus NE USA and Beer-Sheva Israel. This will increase total production capacity to reduce lead time and support greater production flexibility. REASON FOR CHANGE: Due to increasing sales volume, manufacturing is being expanded to Juarez, Mexico. The location is ISO9001 and IATF16949 certified and is currently producing Automotive grade products, such as WSLx2512 and WSLx1206. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: No change to Quality / Reliability /… download now
2021_PCN-DR-00003-Rev0.pdf Product Group: DR/Fri Feb 12, 2021/PCN-DR-00003-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT WSL3921 / WSLP3921 / WSLT3921 WSL5931 / WSLP5931 / WSLT5931 DESCRIPTION OF CHANGE: WSLx3921 width tolerance stated on the datasheet is being revised from 0.205” ± 0.010” to 0.205” ± 0.015” for maximum dimensions of 0.190” to 0.220”. WSLx5931 will be revised from 0.305” ± 0.010” to 0.305” ± 0.015” for maximum dimensions of 0.290” to 0.320”. The nominal dimensional value is not being changed. This PCN is an informational revision of the datasheet with no performance change. REASON FOR CHANGE: The tolerance change is not a change in the construction or the manufacturing process of the part and so there is no impact on performance. The tolerance change does not change the recommended pad… download now
2021_PCN-DR-000023-2021-Rev0.pdf Product Group: DR/Mon Dec 20, 2021/PCN-DR-000023-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT WSLP0805 Change of Construction DESCRIPTION OF CHANGE: WSLP0805 product terminal will change from a copper clad technology to a welded copper technology. This change will conform the 0805 size to the other WSLx sizes which currently use a welded copper terminal. This change will have no change to form fit function performance or the data sheet for the product. REASON FOR CHANGE: The construction of the WSLP0805 terminal bonding to the resistance element will be changed from a copper clad to a welded copper terminal. This allows for overall better performance and utilization of internal processing. This change is also required do to previous clad material suddenly being unavailable… download now
2021_PCN-DPRN-SPG99F17005A01.pdf No. SPG99F17005A01 Messrs. ： Valued customers 20-Jul-2021 Global Marketing Kamaya Electric Co.,Ltd. Discontinue product and replacement notice Thank you very much for the support for Kamaya Electric Co., Ltd. all the time. Kindly please be informed that Kamaya is going to discontinue the following product due to market demand decreasing. Note 1. Product : Product name: Carbon Composition Resister Product type: RC1/2 resistance tolerance J (± 5% ) 2. Alternative Product type : RC1/2 resistance tolerance K (±10%) 3. Reason : 1) Market demand volume is decreasing. 2) Difficulty of profitability improvement. 3) In order to achieve the stable production and delivery, it is must to make Tolerance wider from 5% to 10%. 4. Please be noted RC1/2 J is not available from 2019 Kamaya spec and catalogue. Kindly please contact KAMAYA sales representatives if you need to purchase the above products for future demand. Your kind understanding and corporation is really appreciated. Thank you very much. download now
2021_PCN-DI-00518-2021-Rev0.pdf Product Group: DI/Thu Aug 5, 2021/PCN-DI-00518-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT HTH0750IZ and IHTH1125KZ Packaging Change DESCRIPTION OF CHANGE: The Vishay Inductors IHTH0750IZ and IHTH1125KZ will be changing to tray packaging. IHTH0750IZ = 100 parts per tray IHTH1125KZ = 50 parts per tray REASON FOR CHANGE: Vishay is changing the packaging of the IHTH series to trays in order to provide extra protection during shipping. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N/A PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Dale TIME SCHEDULE: Start Shipment Date: Sun Oct 31, 2021 SAMPLE AVAILABILITY: N/A PRODUCT IDENTIFICATION: Date Code 2144 QUALIFICATION DATA: N/A This PCN is considered approved,… download now
2021_PCN-DI-00512-2021-Rev0.pdf Product Group: DI/Thu May 6, 2021/PCN-DI-00512-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Alternative epoxy on the IHB series DESCRIPTION OF CHANGE: Vishay is approving an alternative epoxy to be used on the IHB series to elevate delivery issues. The original epoxy is Henkel 642756-02 and the new epoxy is ThreeBond 100081. REASON FOR CHANGE: To prevent supply chain issues to our customers EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: None PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Dale TIME SCHEDULE: Start Shipment Date: Sat Nov 27, 2021 SAMPLE AVAILABILITY: N/A PRODUCT IDENTIFICATION: N/A QUALIFICATION DATA: Available upon request This PCN is considered approved, without further notification,… download now
2021_PCN-DI-00507-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F AC T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O NE N T Procedure # SGIHLP series plating change DESCRIPTION OF CHANGE: The SGIHLP plating material composition has changed from Sn60Pb40 to Sn63Pb37. No other changes have been made to the part. CLASSIFICATION OF CHANGE: Assembly Process/Structure REASON FOR CHANGE: The Vishay SGIHLP series have added an additional layer of Sn63Pb37 to the exposed surface mount leads to further extend the solderability shelf life of these inductors. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: Improved solderability PRODUCT CATAGORY: Inductors PART NUMBERS/SERIES/FAMILIES AFFECTED: SGIHLP24DCB100M81A SGIHLP24DCB100M81P SGIHLP24DCB100M81S SGIHLP24DCB150M81A SGIHLP24DCB150M81P SGIHLP24DCB150M81S… download now
2021_PCN-DD-023-Rev0.pdf Produ ct Group: Diod es Division / November 23 , 202 1 / PCN-DD -023 -20 21 Rev . 0 1/1 A dditiona l In-H ou se B acke nd Ass emb ly S ite for A utomot iv e G rade P rodu cts in MicroSMP Packa ge DES CRI PTION OF C HA NGE: To su pport BCP (Bus iness Continuity Program), Vish ay Di odes Di vision is introdu cing an additional in-house back -end manuf act uri ng site for Autom oti ve Gr ade produ cts in MicroSMP pack age (Cas e Outline : DO -219AD ). This new Vishay General Semi conductor ass embly site is loc ated in Kaohsiung, Ta iw an. There is no change in form , fit and fun ction on all involved part numbers. CLASSIF ICATION OF C HANGE: Assembly site REASON FOR C HANGE: Capacity expansion and R isk management EXPE CTED INFLU ENCE ON QUALI TY/RELIABILI TY/PERFOR M ANC E: No cha nge in quality and reliab ility performance PRODUCT CATEGO RY: Re ctifiers and TVS PART NUMBERS/S ERIES /F AMIL IE S AFF ECTED: Inv olved part numbers are listed in below table MSE07PBHM3/89A MSE1PJ -61HM3J/I… download now
2021_PCN-DD-022-Rev0.pdf Product Group : Diodes Division / November 19, 202 1 / PCN -DD -022 -202 1 Rev. 0 1/4 Additional TVS Wafer Source for Commercial Grade Surface Mount TRANS ZORB ® TVS Product s DESCRIPTION OF CHANGE : In addition to the existing in -house TVS wafer source, Vishay Diodes Division is introducing an additional outsourced wafer from a supplier in China for commercial grade uni directional TRANS ZORB ® TVS products in SMA, SMB and SMC packages . There w ill be no change in form, fit and function o f the final products. CLASSIFICATION OF CHANGE: Wafer site REASON FOR CHANGE: Capacity expansion EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: No changes in quality and reliability performance . PRODUCT CATEGORY: TRANS ZORB ® TVS PART NUMBERS/ SERIES /FAMILIES AFFECTED: Involved part numbers are listed in page 2 to 4. SMA (DO -214AC) SMB (DO -214AA) SMC (DO -214AB) SMAJ5.0A~188A -E3/ -M3 SMBJ5.0A~188A -E3/ -M3 SMCJ5.0A~188A -E3/ -M3 P4SMA6.8A~220A -E3/ -M3 P6SMB6.8A~220A -E3/ -M3… download now
2021_PCN-DD-021-Rev0.pdf Product Group: Diodes Division / November 16, 2021 / PCN -DD -021 -20 21 Rev .0 Withdrawal of AEC -Q101 qualification status from certain Glass Diodes DESCRIPTION OF CHANGE: Vishay will withdraw the AEC -Q101 qualification status of Schottky, RF -PIN and Switching Diodes in DO -35, Micro, Mini and Quadro MELF Packages and stop the supply of the Part Numbers mentioned in this announcement to automotive markets/applications accordingly . CLASSIFICATION OF CHANGE: Withdrawal of AEC -Q101 qualification status REASON FOR CHANGE: Low/no demand in automotive markets/applications EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: W ithdraw of AEC - Q101 qualification status . No changes on electrical characteristics and performance . PRODUCT CATEGORY: Diodes PART NUMBERS/SERIES/FAMILIES AFFECTED: Involved part numbers are listed below VISHAY BRAND: Vishay Semiconductors TIME SCHEDULE: For automotive applications : Last Time Buy Date: May 16 , 2022 Last Time Buy Shipment: November 16 , 2022… download now
2021_PCN-DD-020-Rev0.pdf Product Group: Diodes Division / November 12 , 2021 / PCN -DD -020 -20 21 Rev .0 W afer source of Zener Glass Diodes and Switching Glass Diodes DESCRIPTION OF CHANGE: Vishay is introducing an additional external wafer source for Zener Diodes and Switching Diodes in Mini/Quadro/Micro -MELF , DO -35 , DO -41 and DO -213AB Glass Packages. As a result of that and accordingly to our policy, Vishay will stop the supply of the Part Numbers mentioned in this announcement to automotive markets/applications accordingly . CLASSIFICATION OF CHANGE: Wafer/Chip/Pellet Site REASON FOR CHANGE: Qualifica tion of e xternal wafer source EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: W ithdraw of AEC - Q101 qualification status . No changes on electrical characteristics and performance . PRODUCT CATEGORY: Diodes PART NUMBERS/SERIES/FAMILIES AFFECTED: Involved part numbers are listed below VISHAY BRAND: Vishay Semiconductors TIME SCHEDULE: For automotive applications : Last Time Buy Date: May 12… download now
2021_PCN-DD-018-Rev0.pdf Prod uc t G roup: Diodes Divis ion / October 27 , 2021 / PCN-DD -018 -20 21 Re v. 0 1/2 Lead Frame Consolidation in SlimSMAW Package DE SCRIPTION OF CHANGE: Vishay Diodes Division is converting the bottom Lead -frame of SlimSMAW (DO -221AD) package from stage design to flat pad as shown belo w. Meanwhile the soldering process will be also optimiz ed to support process improvement and consolidation for maximum capacity utilization . Qualification test s ha ve been confirmed to meet and pass all specifications. There is no ch ange in form, fit a nd function on all involved part number s. CLASSIFI CATION OF CHANGE: Assembly process /structure REASON FOR C HANGE: Continuous process and capacity support improvement EXPEC TED INFL UENCE ON QUALIT Y/RE LIABILI TY/PER FOR M ANCE: No cha nge in quali ty and reliabili ty performance PROD UCT CATE GOR Y: PAR ® TVS , FRED Pt ® and TMBS ® PART N UMBERS /SERIES/ FAMILI ES AFF ECTED: Involved product series are listed in the table b elow . **Upon th… download now
2021_PCN-DD-016-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Blue tape and wafer ring change DESCRIPTION OF CHANGE: Vishay Semiconductor announces a supplier change of the blue tape and the wafer ring used on some Die Sale On Film products . CLASSIFICATION OF CHANGE: Labeling/packing REASON FOR CHANGE: Continuous improvement . EXPECTED INFLUENCE ON Q UALITY/RELIABILTY/PERFORMANCE: There will be no effect on quality, reliability, or electrical performance. PRODUCT CATEGORY: Die & Wafers PART NUMBERS/SERIES/FAMILIES AFFECTED : VS -4FD063H06A6FC VS -4FD063H06A6FCS1 VS -4FD081H06A6FC VS -4FD081H06A6FCS1 VS -4FD081U06A6FC VS -4FD121H06A6FC VS -4FD121H07A6FC VS -4FD121U06A6FC VS -4FD121U06A6FCS1 VS -4FD121U07A6FC VS -4FD156H06A6FC VS… download now
2021_PCN-DD-015-Rev0.pdf 1/2 Product Group: Diodes Division / September 14, 20 21 / PCN -DD -015 -20 21 Rev. 0 Manufacturing Location Change for Automotive Products in G L34 (DO -21 3A A) and GL41 (DO -213AB) Package s DESCRIPTION OF CHANGE : Vishay Diodes Division is transfer ring the assembly & final test of automotive products in GL34 (DO - 21 3AA ) and GL41 (DO -213AB) package s from Vishay Taipei , Taiwan factory to Vishay Xi’an , China factory . All material s & process are kept the same as in the current production in Taipei . There is no change in form, fit and function of the device s in customer application s, except label size as explained in the table below. Item Before After Assembly Site Vishay Taipei, Taiwan Vishay Xi'an , China Label Size 2D: 7.6 x 3.8 cm 1D: 4.5 x 2.5 cm 2D: 8.0 x 4.0 cm 1D: 6.0 x 3.0 cm 2D Label 1D Label CLASSIFICATION OF CHANGE: Assembly Site REASON FOR CHANGE: Production line consolidation EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: No change in quality,… download now
2021_PCN-DD-014-Rev0.pdf Prod uc t G roup: Diodes Division / August 26, 20 21 / PCN-DD -01 4-20 21 Re v. 0 1/5 A dditio nal In -House Backend Assembly Site for Automotive Grade Products in SMA P ackage DE SCRIPTION OF CHANGE: To support B CP (Business Continuity Program), Vishay Diode s Division is introduc ing an additional in-house back -end manufactur ing site for Automotive Grade products in SMA package (Case Outline: DO -214AC) . This new Vishay General Semiconductor assembly site is located in Kaohsiung , Taiwan . There is no ch ange in form, fit a nd function on all involved part number s. CLASSIFI CATION OF CHANGE: Assembly site REASON FOR C HANGE: Capacity expansion and Risk management EXPEC TED INFL UENCE ON QUALIT Y/RE LIABILI TY/PER FOR M ANCE: No cha nge in quali ty and reliabili ty performance PROD UCT CATE GOR Y: Rectifier s, TVS and Zener PART N UMBERS /SERIES/ FAMILI ES AFF ECTED: Involved part numbers are listed in below table (page 2 to page 5). VI SHAY BRAND: Vishay General Semico nductor… download now
2021_PCN-DD-012-Rev0.pdf Produ ct Group: Diod es Division / Jun e 30 , 20 21 / PCN-DD-012 -20 21 Rev . 0 1/3 Additional In -House Backend Assembly Site for Commercial Rectifiers and TVS in SMPC and MicroSMP Package DES CRI PTION OF C HA NGE: To su pport BCP (Bus iness Continuity Program), Vish ay Di odes Di vision is introducing an additional in - house back -end manufacturing site for Commercial Grade products in SMPC (Case Outline: TO -277A ) and MicroSMP (Case Outline: DO -219AD) package . This new Vishay General Semiconductor assembly site is located in Kaohsiung, Taiwan. There is no change in form, fit and function on all involved part numbers . CLASSIF ICATION OF C HANGE: Assembly site REASON FOR C HANGE: Capacity expansion and R isk management EXPE CTED INFLU ENCE ON QUALI TY/R ELIABILI TY/PERFOR M ANC E: No cha nge in quality and reliab ility performance PRODUCT CATEGO RY: Re ctifiers &TVS PART NUMBERS/S ERIES /F AMIL IE S AFF ECTED: Involved part numbe rs are listed in the table below. Part number… download now
2021_PCN-DD-011-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Product Group: DIODES / Jun 1 , 20 21 / PCN -DD -011 -20 21 Rev 0 Additional supplier for Power Modules housing material DESCRIPTION OF CHANGE: Additional supplier for Power Modules housing raw material , adding LATER® to existing Crastin®. Both are PBT material s filled with glass fibers 30% and both of them are UL certified. CLASSIFICATION OF CHANGE: Molding/Coating . REASON FOR CHANGE: Strengthening of supply chain security . EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: There will be no effect on product quality, reliability or performa nce. Modules made by the new plastic material housing will have the same form, fit and function. PRODUCT CATEGORY: Modules PART… download now
2021_PCN-DD-010-Rev0.pdf Prod uc t G roup: Diodes Division / April 29 , 20 21 / PCN-DD -010 -20 21 Re v. 0 1/4 Additio nal In-House Backend Assembly Site for Commercial Grade TVS and Zener in SMA Package DE SCRIPTION OF CHANGE: To support B CP (Business Continuity Program), Vishay Diode s Division is introduc ing an additional in-house back -end manufactur ing site for Commercial Grade TRANS ZORB ® TVS and Zener products in SMA package (Case Outline: DO -214AC) . This new Vishay General Semiconductor assembly site is located in Kaohsiung , Taiwan . There is no ch ange in form, fit a nd function on all involved part number s. CLASSIFI CATION OF CHANGE: Assembly site REASON FOR C HANGE: Capacity expansion and Risk management EXPEC TED INFL UENCE ON QUALIT Y/RE LIABILI TY/PER FOR M ANCE: No cha nge in quali ty and reliabili ty performance PROD UCT CATE GOR Y: TRANS ZORB ® TVS and Zener PART N UMBERS /SERIES/ FAMILI ES AFF ECTED: Involved part numbers are listed in page 2 to 4. Involved Product List… download now
2021_PCN-DD-007-Rev0.pdf Product Group: Diodes Division / April 8, 20 21 / PCN -DD -007 -2021 Rev. 0 1/3 /2 Pla ting Site Transfer for Axial 1.5KE TransZorb TVS P roducts DESCRIPTION OF CHANGE: Vishay Diodes Division is urgently transfer ring plating site of Axial 1.5KE Trans Zorb TVS products from subcontractor in Wuxi, China to our own production location in Tianjin, China. There is no change in form, fit and function on all involved products. CLASSIFICATION OF CHANGE: Plating site REASON FOR CHANGE: Discontinuation of existing plating subcon operation EXPECTED INFLUENCE ON QUALITY/RELIA BILITY/PERFORMANCE: No change in quality and reliability performance PRODUCT CATEGORY: TransZorb TVS PART NUMBERS/SERIES/FAMILIES AFFECTED: Involved part numbers are listed in page 2 to 3. 1.5KE6.8A~540A -E3/HE3 1.5KE6.8CA~220CA -E3/HE3 1N6267A~6303A -E3/HE3 ICTE5~18 -E3/HE3 (Being obsolete per PCN -DD -004 -2021) ICTE8C~18C -E3/HE3 (Being obsolete per PCN -DD -004 -2021) 1N6373~6386 -E3/HE3 (Being obsolete per PCN -DD… download now
2021_PCN-DD-006-Rev0.pdf Prod uc t G roup: Diodes Division / April 7 , 20 21 / PCN-DD -006 -20 21 Re v. 0 1/2 Additional In -House Backend Assembly Site for Commercial Rectifiers in SMA Package DE SCRIPTION OF CHANGE: To support B CP (Business Continuity Program), Vishay Diode s Division is introduc ing an additional in- house back -end manufactur ing site for Commercial Grade Standard and Ultrafast products in SMA package (Case Outline: DO -214AC) . This new Vishay General Semiconductor assembly site is located in Kaohsiung , Taiwan . There is no ch ange in form, fit a nd function on all involved part number s. CLASSIFI CATION OF CHANGE: Assembly site REASON FOR C HANGE: Capacity expansion and Risk management EXPEC TED INFL UENCE ON QUALIT Y/RE LIABILI TY/PER FOR M ANCE: No cha nge in quali ty and reliabili ty performance PROD UCT CATE GOR Y: Rectifiers PART N UMBERS /SERIES/ FAMILI ES AFF ECTED: Involved part numbers are listed in the table b elow . Note: Upon this PCN approval, all future and customized… download now
2021_PCN-DD-004-Rev0.pdf Product Group: Diodes Division / Feb rua ry 26 , 20 21 / PCN -DD -00 4-20 21 Rev 0 1/2 /3 Product Discontinuation Notice of Rectifier and TVS Products DESCRIPTION OF CHANGE: Vishay Diodes will discontinue some Rectifier and TVS part numbers with low volume sales . CLASSIFICATION OF CHANGE: Product Termination REASON FOR CHANGE: Low sales EXPEC TED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N/A PRODUCT CATEGORY: Diodes PART NUMBERS/SERIES/FAMILIES AFFECTED: Involved part numbers are listed below . Package Obsoleted P/N Alternative P/N Package Obsoleted P/N Alternative P/N Package Obsoleted P/N Alternative P/N 1.5KE 1N6373-E3/51 1.5KE6.8A-E3/51 1.5KE 1N6385-E3/73 1.5KE18CA-E3/73 1.5KE ICTE18HE3_A/D 1.5KE22AHE3_A/D 1.5KE 1N6373-E3/54 1.5KE6.8A-E3/54 1.5KE 1N6385HE3_A/C 1.5KE18CAHE3_A/C 1.5KE ICTE5-E3/51 1.5KE6.8A-E3/51 1.5KE 1N6373-E3/73 1.5KE6.8A-E3/73 1.5KE 1N6385HE3_A/D 1.5KE18CAHE3_A/D 1.5KE ICTE5-E3/54 1.5KE6.8A-E3/54 1.5KE 1N6373HE3_A/C 1.5KE6.8AHE3_A/C 1.5KE 1N6386-E3/51… download now
2021_PCN-DD-003-Rev0.pdf Product Group: Diodes Division / February 8, 20 21 / PCN -DD -003-2021 Rev. 0 1/2 Additional GPP Wafer Source for Commercial Grade Surface Mount Products DESCRIPTION OF CHANGE: In addition to the existing in -house GPP wafer source, Vishay General Semiconductor is introducing a qualified outsourced wafer from existing supplier in China for Commercial Grade Standard Rectifier in SMB and SMC packages. There is no change in form, fi t and function of the final products. CLASSIFICATION OF CHANGE: Wafer/Chip/Pellet Site REASON FOR CHANGE: Capacity expansion and delivery support EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: No change in product quality, reliability and performance PRODUCT CATEGORY: Rectifiers PART NUMBERS/SERIES/FAMILI ES AFFECTED: Involved part number list are listed in below table. Part number list S2A -E3/52T S2J -E3/5BT S3B -M3/57T S3K -E3/9AT S5D -M3/9AT S5MS -E3/9AT S2A -E3/5BT S2J -M3/52T S3B -M3/9AT S3K -M3/57T S5G -E3/57T S5MS -M3/57T S2A -M3/52T S2J… download now
2021_PCN-DD-001-Rev0.pdf Prod uc t G roup: Diodes Division / Ja nuary 15, 20 21 / PCN-DD -00 1-20 21 Re v. 0 A dditio nal P la tin g Hous e in C hin a for SMF (DO -219AB) DE SCRIPTION OF CHANGE: To support BCP (Business Continuity Program), Vishay Diode s Division is introduc ing an additional plati ng subcontractor for SMF(DO -219AB) produc ts. This new plati ng house is located in a dedicated plating industrial park in Shanghai , China. There is no ch ange in form, fit a nd function on all involved part number s. CLASSIFI CATION OF CHANGE: Assembly Site - Plating REASON FOR C HANGE: Capacity expansion and Risk management EXPEC TED INFL UENCE ON QUALIT Y/RE LIABILI TY/PER FOR M ANCE: No cha nge in quali ty and reliabili ty performance PROD UCT CATE GOR Y: Diodes PART N UMBERS /SERIES/ FAMILI ES AFF ECTED: Involved part numbers are listed in the table b elow . VI SHAY BRAND: Vishay Semico nductors & Vi shay General Semico nductor TIME SC HED ULE: Start shipment date: January 15th , 20 21 SAMPLE AVAILABIL ITY:… download now
2021_PCN-DBR-00015-Rev0.pdf Product Group: Draloric/Beyschlag Resistors / December 16 th, 2021 / PCN-DBR-00015-2021 Rev0 Chip resistors backend capacity expansion - plating DESCRIPTION OF CHANGE: Introduction of the plating process in Huizhou, China, as part of the chip resistors backend capacity expansion. There will be no change in product specification, product quality or part number. CLASSIFICATION OF CHANGE: Assembly site REASON FOR CHANGE: To meet increasing demand of chip resistors, to increase flexibility and improve lead times, additional backend capacity will be installed in a new plant. EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: None PRODUCT CATEGORY: Resistors PART NUMBERS/SERIES/FAMILIES AFFECTED: Thick Film 0402 and Thick Film 0603, part number details see in Appendix A REPLACEMENTS: not applicable VISHAY BRAND(s): Vishay TIME SCHEDULE: Start Shipment Date : February 15 th,2022 Last Time Buy Date: N/A Last Time Shipment Date: N/A SAMPLE AVAILABILITY: available PRODUCT IDENTIFICATION:… download now
2021_PCN-DBR-00009-2021-Rev0.pdf Product Group: DBR/Tue Sep 28, 2021/PCN-DBR-00009-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Change in taping pitch of AC05-CS Axial Fusible Wirewound Safety Resistors DESCRIPTION OF CHANGE: Product taping pitch of AC05-CS axial products packed in ammo packing will be increased from 10 mm to 15 mm for avoiding body abrasion and lacquer damage. This change will be applicable to axial products supplied with tape distance 83 mm and 93 mm. REASON FOR CHANGE: Improvised packing to prevent lacquer coating damage during transportation and handling. Due to the increased taping pitch, the ammo packing box dimensions will be changed. Mixed deliveries are likely during transition time depending on the available inventory. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: Not… download now
2021_PCN-DBR-00004-2021-Rev0.pdf Product Group: DBR/Wed Jun 23, 2021/PCN-DBR-00004-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Discontinuation of Resistance Value Marking for TNPW e3 series, High Stability Thin Film Flat Chip Resistors, in case sizes 0603 to 2512 DESCRIPTION OF CHANGE: Discontinuation of resistance value marking for High Stability Thin Film Flat Chip Resistors 0603 – 2512 size. REASON FOR CHANGE: Optimization of production process. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: Minor PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Draloric TIME SCHEDULE: Start Shipment Date: Sat Jan 1, 2022 SAMPLE AVAILABILITY: samples available from Aug. 1st 2021 for AOI test purpose (undefined resistance / TCR - tolerance… download now
2021_PCN-DBR-00003-2021-Rev0.pdf Product Group: DBR/Mon Jun 28, 2021/PCN-DBR-00003-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Discontinuation of Resistance Value Marking for Special Thick Film Resistors Pb-free, RoHS compliant series: CRCW-XX e3, D/CRCW-xx e3, D AP, CRCW-AP, RCA e3, RCG e3 and RCL e3 DESCRIPTION OF CHANGE: Discontinuation of resistance value marking for Special Thick Film Resistors in 0603 to 2512 size, standard and reverse geometry REASON FOR CHANGE: Optimization of production process EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: None PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Draloric TIME SCHEDULE: Start Shipment Date: Sun Jan 2, 2022 SAMPLE AVAILABILITY: 10/01/2021 PRODUCT IDENTIFICATION: Date code, on the… download now
2021_PCN-Change_in_masterdata_Weidmueller-Screwdrivers.pdf Creation Date: 2021 -06 -17 English version below. Sehr geehrte Damen und Herren, mit der angehängten Excel -Datei informieren wir Sie heute über Änderungen unserer Artikelstammdaten im Bereich der Schraubendreher . Ab sofort ist unse r neues und erweitertes Schraubendreher -Sortiment erhältlich (Artikelnummern Spalte B) und löst die alten Ausführungen mit den Artikelnummern aus Spalte A ab. Wir bitten Sie diese Änderung in Ihren Weidmüller Materialstamm zu übernehmen . Sie möchten Ihren Weidmüller Materialstamm komplett aktualisieren? Eine aktuelle Produktdatenzusammenstellung im BMEcat Format, inklusive der neuen Schraubendreher, finden Sie als Download auf unserer Internetseite www.weidmueller.de/bmecat . ---------------------------------------------------------- Dear Ladies and Gentlemen, with the attached Excel -file we inform you today regarding changes in our master data in the assortment of screwdrivers . From now on our new and extended assortment is available (article number… download now
2021_PCN-CC-00002-2021-Rev0.pdf Product Group: CC/Mon Nov 29, 2021/PCN-CC-00002-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Additional Epoxy Supplier for BCc Line Safety Capacitor Series DESCRIPTION OF CHANGE: To secure the supply chain for our customer we introduce an additional source for the dry epoxy used as coating for the BCc line safety capacitor series AY1 and AY2. This introduction will have no impact on the quality and reliability and is certified by the responsible certification bodies. REASON FOR CHANGE: additional source EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: No influence on form, fit, function PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay BCcomponents TIME SCHEDULE: Start Shipment Date: Sun May 29, 2022 SAMPLE… download now
2021_PCN-CC-00001-2021-Rev0.pdf Product Group: CC/Tue May 18, 2021/PCN-CC-00001-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Change of maximum thickness for selected parts of HVCC series DESCRIPTION OF CHANGE: To extent the capacitance tolerance range for selected components of the HVCC series to 10%, we adjust the maximum thickness of those parts. This adjustment also includes the corresponding 20% version. The affected part numbers are indicated at the end of this notification. REASON FOR CHANGE: availability extension to K=10 % tolerance of capacitance EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: no change PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Roederstein TIME SCHEDULE: Start Shipment Date: Sun Nov 14, 2021 SAMPLE… download now
2021_PCN-CC-000007-2021-Rev0.pdf Product Group: CC/Tue Nov 30, 2021/PCN-CC-000007-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Additional Epoxy Supplier for BCc Line Safety Capacitor Series DESCRIPTION OF CHANGE: To secure the supply chain for our customer we introduce an additional source for the dry epoxy used as coating for the VY* BCc line safety capacitor series. This introduction will have no impact on the quality and reliability and is certified by the responsible certification bodies. REASON FOR CHANGE: additional source EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: No influence on form, fit, function PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay BCcomponents TIME SCHEDULE: Start Shipment Date: Sun May 29, 2022 SAMPLE… download now
2021_PCN-Alternative-housing-material-LSP05G-LSP05GI.pdf 8755 W. Higgins Road Product Change Notice (PCN) Suite 500 Chicago, IL 60631 www.littelfuse.com October 1 st, 2021 Product Change Notification for Littelfuse LSP05G and LSP05GI Module Series To whom it may concern, Littelfuse would like to notify you of a change related to housing material of LSP05G and LSP05GI Modules Series due to recent LCP material shortage in the market . To continue product production and supply , we have qualified and added PPS1660 as an additional/alternative housing material for LSP05G and LSP05GI Module Series. Item Current Additional/Alternative Housing Material LCP KB40M 40%GF PPS1660. GF45 According to our thorough qualification test, the additional/alternative housing material will maintain current product’s original electrical parameters, mechanical/dimensional specification, quality, reliability, performance, and part number . Qualification test report is available upon request. Th is new material will be used for production starting from Nov ember 1st,… download now
2021_PCN-Additional-Application-for-Thermistor-Sensor.pdf October 19, 2021 ECOMAL EUROPE GmbH Additional Application for Thermistor Sensor Due to Manufacturer Change of Epoxy Resin Curing Agent Raw Material We thank you for your continued business. Due to the low facilities utilization rates caused by the cold weather in North America and COVID -19, as well as the rapid increase in demand for automobiles, there are a lot of uncertainties in procuring raw materials for the curing/curative agent, which is a constituent material of the epoxy resin used for thermistor sensors. We are continuing negotiations with our epoxy resins suppliers. However, to ensure a stable supply amidst uncertainty, for thermistor sensors using epoxy resin made from a new curing/curative agent raw materi al, we are applying for additional approval and asking for your evaluation. Here below is the estimated timeframe and appendices list: • Additional application products: Please see Appendix 1. • Curing agent manufacturers remain the same, and raw material manufacturers… download now
2021_PCN-AC-00505-2021-Rev0.pdf Product Group: AC/Wed Sep 22, 2021/PCN-AC-00505-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Vishay BCcomponents Capacitor Series 013 RLC, 036 RSP, 116 RLL - Change of coating material of aluminum cases DESCRIPTION OF CHANGE: Due to standardization reasons, the coating material of aluminum cases will be changed from Polypropylene (PP) to Nylon (PA). All part numbers of series 013 RLC, 036 RSP, 116 RLL with case size 8.2x11mm are affected. REASON FOR CHANGE: Standardization of aluminum cases EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: No influence in quality and/or reliability; Only visibile change from light blue to transparent color has to be expected. The Nylon (PA) coating is in use since more than one decade at various product series at same production location.… download now
2021_PCN-AC-00003-2021-Rev0.pdf Product Group: AC/Mon Nov 22, 2021/PCN-AC-00003-2021-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Vishay BCcomponents Aluminum Electrolytic Capacitors Change of molding base material for Screw Terminal disks DESCRIPTION OF CHANGE: The base material of our Screw Terminal disks will change from Phenolic to Epoxy. REASON FOR CHANGE: The change is necessary to avoid supply chain problems and shortages, in line with our risk management policy. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: No influence in quality and/or reliability. A change in color has to be expected. Epoxy is already known as a standard material for Screw Terminal disks across the industry. PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay… download now
2021_PCN-20211222.pdf 8755 W. Higgins Road Suite 500 Chicago, Illinois USA 60631 Dec 22th, 2021 Notification of Thyristor&Diode I4Pac and GUFP Package Part Numbers MOQ Change To whom it may concern, This is a declaration letter to state that Littelfuse will change the MOQ for Thyristor&Diode I4Pac and GUFP Package Part Numbers aligning to manufacture requirement. Detail affected part number list refer to Appendix. There will be no change on product fit, form, function, and no change to MPQ/Packing Mode. We value your business and look forward to assisting you whenever possible. Thank you! Sincerely and Best Regards, Zhiwei Wang Zhiwei Wang Product Marketing Manager Thyristor and Rectifier Diode Semiconductor Business Unit +86 510 85277701 - 79 27 zwang@littelfuse.com Appendix --- MOQ change table for Affected Products PackageType Material Description Old MOQ New MOQ I4PAC CLA40P1200FC Power Thyristor Discretes -Others i4 -Pac 25 250 I4PAC CMA30P1600FC Power Thyristor Discretes -Others i4 -Pac 25 250 I4PAC… download now
2021_PCN-20210308.pdf S ubjec t : A pr elim inar y re port on changes 2021 / 03 / 08 1. Products to be applied : PCX 1 331 Series, PCX2 347 Series (Over than 1uF capacitance) 2. Cause of changing : - KC certification is acquired about PCX1 331 Series and PCX2 347 Series (Over than 1uF capacitance) * KC : Korea Certification 3. Effective date : A s of July 01 , 20 21 (The period of using together wi th old marking : until stock exha usted) 4. Contents of changing : KC mark will be added on product and product label as described below. 5. Attached file : the detai ls of changing. Before After Before & After (marking design) download now
2021_PCN-2110003.pdf VTC-AER-004-A Product / Process Change Notice (PCN) PCN #: 2110003 Issue Date: 2021/11/18 Product Affected: MELF High Voltage Resistor-CSRH Series E24 Effective Date: 2021/11/18 ■ Product Mark □ Date Code □ Packaging □ Others Contact: ALL Customers Attachment: □ Yes ■ No DESCRIPTION AND PURPOSE OF CHANGE: Dear all Customers: Since Viking produces metal film melf resistor and high-voltage metal glaze resistor, the appearance of both is painted blue, to avoid false identification, we will have different color code of high-voltage metal glaze resistor: The high -voltage metal glaze indicates have four color code lines, the fourth color code line is fix ed white. The first to third color code lines adopt the E24 series marking method, for example, t he marking code line 600k resistor is: blue, black, yellow and white. We hereby announce that the change will be effectiv e on Nov. 18, 2021. And we’ll regard as your acceptance if no response to this PCN within the notice period. DETAIL OF… download now
2021_PCN-2110001.pdf VTC-AER-004-A Product / Process Change Notice (PCN) PCN #: 2110001 Issue Date: 2021/10/8 Product Affected: Chip Shunt Resistor – LRS Series Effective Date: 2022/3/31 □ Product Mark □ Date Code □ Packaging ■ Others Contact: ALL Customers Attachment: □ Yes ■ No DESCRIPTION AND PURPOSE OF CHANGE: Dimension Change ： In order to further optimize the product process an d improve the product performance and stability, combined with the needs of the Viking's key and mai n customers, Viking updated the molds of the existing products in August 2020 and r edefined the manufacturing dimensions of the main body of the products. Please refer to the detail changes as below. We hereby announce that the change will be effectiv e on 2022/3/31. Please sign back the PCN with your comment, and we' ll regard as your acceptance if no response to this PCN within the notice period. DETAIL OF CHANGE: 1. Dimension Change ： VTC-AER-004-A Before Change ： After Change ： VTC-AER-004-A RELIABILITY / QUALIFICATION… download now
2021_PCN-2104001.pdf download now
2021_PCN-211001.pdf 1 Product / Process Change Notice (PCN) PCN #: 211001 Issue Date: 2021/ 10 /1 Product Affected: TO -220 Power Resistor –TR35 Serie s TO -263 Power Resistor –STR35 Serie s Effective Date: 202 2/3/31 □ Product Mark □ Date Code □ Packaging ■ Others Contact: All customers Attachment: ■ Yes □ No DESCRIPTION AND PURP OSE OF CHANGE: 變更代工廠 : Change the OEM of TR35 and STR35 series. Reason of this change: 由於 TR35 & STR35 Series 這兩個系列產品 現有 的代工廠 商 將於 202 2年 3月 31日 終止生產 該 兩項 封裝 製程的產品 ，故這兩項產品將 變更由新的 代工廠 商提供 。 The OEM that produces TR35 and STR35 will stop producing these two products on March 31, 2022, therefore we will switch to other OEM to produce these two products We hereby announce that the change will be effective on 202 2/3/31. Please sign back the PCN with your c omment, and we'll regard as your acceptance if no response to this PCN within the notice period. DETAIL OF CHANGE: 詳細變更請參 閱第 2~4 頁 。 Please refer to pages 2 to 4 . RELIABILITY / QUALIF ICATION SUMMARY: It is not necessary to… download now
2021_PCN-210929.pdf 0.65±0.10.55±0.10.3±0.10.43±0.10.28±0.10.20±0.10.65±0.10.55±0.10.3±0.10.43±0.10.28±0.10.20±0.10.5±0.10.5±0.10.5±0.10.5±0.10.5±0.10.43±0.10.65±0.10.43±0.10.28±0.10.28±0.11.5±0.2H2*(mm)0.45±0.10.5±0.11.5±0.20.95±0.10.43±0.10.65±0.10.43±0.10.28±0.10.28±0.11.5±0.2H1*(mm)0.45±0.10.5±0.11.5±0.20.95±0.10.5±0.10.5±0.10.5±0.10.5±0.10.5±0.10.5±0.10.5±0.1E*(mm)0.35±0.10.35±0.10.5±0.10.5±0.15.0±0.35.0±0.35.0±0.35.0±0.35.0±0.35.0±0.35.0±0.35.0±0.35.0±0.3D(mm)3.0±0.33.0±0.35.0±0.35.0±0.34.0±0.34.0±0.34.0±0.3C(mm)1.14±0.31.14±0.32.0±0.32.0±0.35.0±0.35.0±0.35.0±0.34.0±0.34.0±0.34.0±0.32.0±0.32.0±0.32.0±0.32.0±0.32.0±0.34.0±0.37.75±0.37.75±0.37.75±0.35.0±0.35.0±0.35.0±0.35.0±0.35.0±0.37.75±0.3B(mm)3.05±0.33.05±0.35.0±0.35.0±0.315.0±0.315.0±0.315.0±0.3A(mm)6.35±0.36.35±0.310.5±0.310.5±037.75±0.37.75±0.37.75±0.315.0±0.315.0±0.315.0±0.310.5±0.310.5±0.310.5±0.310.5±0.310.5±0.315.0±0.3ManganinManganinNiCr alloyNiCr alloyNiCr alloyManganinNiCr alloyNiCr alloyNiCr alloyNiCr alloyManganin0.20.4( mΩ)0.910.2,… download now
2021_PCN-210716.pdf GaN Systems CONFIDENTIA L GaN Systems Inc. Product Change Notification Subject : Additi onal package supplier for GS -065 -011 -1-L PCN Number: PCN 210716 Date: Aug . 24 th, 2021 Doc Number: PCN210716 Page 2 of 4 GaN Systems CONFIDENTIAL PCN210 716 PCN Tracking No. PCN210 716 Date Aug 24 th, 2021 Affected Part Number (s) GS -065 -011 -1-L-TR , GS -065 -011 -1-L-MR Description of Change(s) Additional package supplier as alternative source for the affected part numbers. Parts manufactured by the additional supplier have the following characteristics : • The external PDFN leads differ in shape at the edge . The Drain, Source and Gate leads narrow in width towards the outside edge s of the package . This does not change the recommended PCB footprint . • The Tape and Reel dimensions are slightly different and t he horizontal and vertical tolerance s for drive -pin to pocket center increase from +/ - 0.05 to +/ - 0.1 mm. This is no ted on the revised datasheet. The above are minor difference… download now
2021_PCN-210602.pdf VTC -AER -004 -A Product / Process Change Notice (PCN) PCN #: 210602 Issue Date: 2021/06/11 Product Affected: Metal Film Precision High Voltage MELF Resistor – CSRP Effective Date: 2021/12/15 □ Product Mark □ Date Code □ Packaging Others Contact: All customers Attachment: □ Yes No DESCRIPTION AND PURP OSE OF CHANGE: Change the material of insulation coating . Reason of this change: In order to meet the various applications of customers , we have developed an advanced CSRP series wit h better environmental performance and more stable characteristics . Th e moisture resistance ability of new CSRP is improved; therefore it is able to pass the strict test conditions of AEC -Q200 to meet customer application requirements. We hereby announce that the change will be effective on 2021/12/15. Please sign back the PCN with your comment, and we'll regard as your acceptance if no response to this PCN within the notice period. DETAIL OF CHANGE: 1. Product a ppearance ： Before change After change 2.… download now
2021_PCN-210601.pdf Product / Process Change Notice (PCN) PCN #: 210601 Issue Date: 2021/06/ 08 Product Affected: Ultra -Low Chip Resistor Jumper –LRJ Series Effective Date: 2021/12/30 □ Product Mark □ Date Code □ Packaging ■ Others Contact: All Customers Attachment: □ Yes □ No DESCRIPTION AND PURP OSE OF CHANGE: 變更產品基材 (Substrate) 及保護層 (Overcoat) 材質 Change the material of substrate and overcoat. Reason of this change: 提升產品耐熱性 ， 且加強產品的結構強度 及 抗溶劑能力 。 Enhance the heat resistance, structure strength and solve nt resistance of product . We hereby announce that the change will be effective on 2021/12/30 . Please sign back the PCN with your comment, and we'll regard as your acceptance if no response to this PCN within the notice period. DETAIL OF CHANGE: 影響產品： LRJ Series Affected product: LR J Series *EPOXY GLASS CLOTH 的熱傳導特性較 ADHESIVE FILM 佳 ， 且支撐力較好 。 Regarding thermal conductivity and support force, EPOXY GLASS CLOTH is better than ADHESIVE FILM. *EPOXY 相較 POLYESTER 有較好的耐熱性 ， 及抗溶劑能力 。 In com parison with… download now
2021_PCN-210402.pdf download now
2021_PCN-202111_MOQ-Change.pdf © 20 21 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED. T HI S DO CUMENT I S SUBJECT T O CHANG E W I T HO UT NO T I CE. T HE PRO DUCT S DESCRI BED HEREI N AND T HI S DO CUMENT ARE SUBJECT T O SPECI F I C DI SCLAI MERS, SET F O RT H AT www. vishay. com/ doc?9 10 00 Product Group: Vishay Semiconductors / Diodes / November 2021 Change of Minimum Order Quantity Vishay’s Diodes Division is changing the Minimum Order Quantity (MOQ) on some TO -220 and D2PAK (TO -262 and TO -263) Products . The new MOQ will be 8,000 pieces Packaging specif ications (Tubes and Reels dimensions and quantities) will remain unchanged. Affected Products: The af f ected products are listed below FRED VS -15ETH03S -M3 VS -15ETH03STRL -M3 VS -15ETH03STRR -M3 VS -15ETH06S -M3 VS -15ETH06STRL -M3 VS -15ETH06STRR -M3 VS -15ETL06S -M3 VS -15ETL06STRL -M3 VS -15ETL06STRR -M3 VS -15ETX06S -M3 VS -15ETX06STRL -M3 VS -15ETX06STRR -M3 VS -16CTU04S -M3 VS -16CTU04STRL -M3 VS -16CTU04STRR -M3 VS -20CTH03S -M3 VS -20CTH03STRL… download now
2021_PCN-4020-03.pdf download now
2021_PCN-2021-02-Y4.pdf Product / Process Change Notification N° 2021/02 N° 2021/02 Page 1 of 3 4.14F12d Dear Customer, Please find attached our IXYS / Littelfuse Technolo gy PCN Important information for your attention: Please respond to this PCN by indicating your decis ion on the approval form, sign it and return to your sales partner before 31.03.2021 . IXYS aligns with the widely-recognized JEDEC STANDA RD “JESD46“, which stipulates: “Lack of acknowledgement of the PCN within 30 days constitutes acceptance of the change.“ Your prompt reply will help IXYS to assure a smooth and well executed transition. If IXYS does not hear from your side by the due date, we wi ll assume your full acceptance to this proposed change and its implementation. Your attention and response to this matter is great ly appreciated Disclaimer: If we do not receive any response by th e date in the PCN above we consider this as the acceptance of the PCN. After the last order date as stated herein, purchase orders related to the… download now
2021_PCN-31.pdf Pro duct C han ge N o PC N N um ber: P C N D ate : In i Im ple m en ta P C N I N FO RM ATIO N PC N P hase P re F in al Ty p e o f C hange M ajo r M in o r O bso le sc e n ce P C N R eq uir e m en t C usto m er A ppro va l R eq uir e d C usto m er N o Change A Select all that apply Fo rm R elia b ilit y F it N /A F u nc Tit le * This will be the name of the PCN f older Desc rip C hange R ea so n f o r C hange M AJO R A N D M IN O R C H AN GE I N FO RM ATIO N A Sp eci a pplic a ble ) * se e u nit e d sic .c o m D eta il o f Po te n Im pact t o C usto m er Q uali o r D ata ( if a pplic a ble ) C usto m er S a m ple s A va ila ble ( if a pplic a ble ) Q uali R esu lt s A va ila ble ( if a pplic a ble ) Id en C hanged P ro d uct (if applic a ble ) C om men ts a nd/o r Su ppor C usto m er A ck n o w le d ge m en t/ R esp o nse s 3 1 9/3 0/2 021 D ix ie -A nn S in ne 1 1/1 /2 021UF3N170400B7S MSL r a The M SL r a P ro duct e n han ce m en t a n d im pro ve d c u sto m er m an ufa ctu rin g p… download now
2021_PCN-30.pdf Pro duct C han ge N o PC N N um ber: P C N D ate : In i Im ple m en ta P C N I N FO RM ATIO N PC N P hase P re F in al Ty p e o f C hange M ajo r M in o r O bso le sc e n ce P C N R eq uir e m en t C usto m er A ppro va l R eq uir e d C usto m er N o Change A Select all that apply Fo rm R elia b ilit y F it N /A F u nc Tit le * This will be the name of the PCN f older Desc rip C hange R ea so n f o r C hange M AJO R A N D M IN O R C H AN GE I N FO RM ATIO N A Sp eci a pplic a ble ) * se e u nit e d sic .c o m D eta il o f Po te n Im pact t o C usto m er Q uali o r D ata ( if a pplic a ble ) C usto m er S a m ple s A va ila ble ( if a pplic a ble ) Q uali R esu lt s A va ila ble ( if a pplic a ble ) Id en C hanged P ro d uct (if applic a ble ) C om men ts a nd/o r Su ppor O BSO LE SC EN CE N O TIF IC ATIO NS I N FO RM ATIO N La st T im e B uy D ate L a st T im e S h ip D ate A lt e rn ate P a rt R eco m men da 3 0 9/8 /2 021 D ix ie -A nn S in ne 1 0/1 /2 021End-of -Life No The c u rre… download now
2021_PCN-28.pdf 9/13/21, 5:12 PM PCN Form - Final-PCN-28 https://unitedsic.sharepoint.com/quality/pcn/_layouts/15/FormServer.aspx?XmlLocation=%2fquality%2fpcn%2fpcnform%2fFinal-PCN-28.xml&Clie ntIns… 1/2 Product Change No fica on PCN Number: PCN Date: Ini ator: Implementa on Date: PCN INFORMATION PCN Phase Pre Final Type of Change Major Minor Obsolescence PCN Requirement Customer Approval Required Customer No fica on Required No fica on Only Change Affects Select all that apply Form Reliability Fit N/A Func on Title * This will be the name of the PCN folder Descrip on of Change Reason for Change MAJOR AND MINOR CHANGE INFORMATION Affected Product Specifica on (if applicable) *see unitedsic.com for datasheets Detail of Poten al Impact to Customer Qualifica on Plan or Data (if applicable) Customer Samples Available (if applicable) Qualifica on Results Available (if applicable) Iden fica on of Changed Product (if applicable) Comments and/or Suppor ng Data Customer Acknowledgement/Responses 28 6/4/2021 Dixie-Ann… download now
2021_PCN-27.pdf 9/17/21, 3:20 PM PCN Form - Final-PCN-27 https://unitedsic.sharepoint.com/quality/pcn/_layouts/15/FormServer.aspx?XmlLocation=%2fquality%2fpcn%2fpcnform%2fFinal-PCN-27.xml&Clie ntIns… 1/2 Product Change No fica on PCN Number: PCN Date: Ini ator: Implementa on Date: PCN INFORMATION PCN Phase Pre Final Type of Change Major Minor Obsolescence PCN Requirement Customer Approval Required Customer No fica on Required No fica on Only Change Affects Select all that apply Form Reliability Fit N/A Func on Title * This will be the name of the PCN folder Descrip on of Change Reason for Change MAJOR AND MINOR CHANGE INFORMATION Affected Product Specifica on (if applicable) *see unitedsic.com for datasheets Detail of Poten al Impact to Customer Qualifica on Plan or Data (if applicable) Customer Samples Available (if applicable) Qualifica on Results Available (if applicable) Iden fica on of Changed Product (if applicable) Comments and/or Suppor ng Data Customer Acknowledgement/Responses All Customer… download now
2021_PCN-26.pdf PCN Form - Pre-PCN-26 Product Change Notification PCN Number: PCN Date:Initiator: Implementation Date:PCN INFORMATION PCN Phase Pre Final Type of Change Major Minor Obsolescence PCN Requirement Customer Approval Required Customer No fica on Required No fica on Only Change Affects Select all that apply Form Reliability Fit N/A Func onTitle Descrip on of Change Reason for Change MAJOR AND MINOR CHANGE INFORMATION Affected Product Specifica on (if applicable) *see unitedsic.com for datasheets Detail of Poten al Impact to Customer Qualifica on Plan or Data (if applicable) Customer Samples Available (if applicable) Qualifica on Results Available (if applicable) 1/2 26 6/11/2021 Dixie-Ann Sinnette EC9/2021 Assembly Line Move LiteOn to Eris Assembly supplier (LiteOn Semiconductor) is moving DFN8x8 line from its Keelung T aiwan factory to Eris Technology Corporation in New Taipei City, Taiwan. Additionally, an alternative Bill of Material will be introduced. Lead frame dimension change as shown in… download now
2021_PCN-21.pdf Pro duct C han ge N o PC N N um ber: P C N D ate : In i Im ple m en ta P C N I N FO RM ATIO N PC N P hase P re F in al Ty p e o f C hange M ajo r M in o r O bso le sc e n ce P C N R eq uir e m en t C usto m er A ppro va l R eq uir e d C usto m er N o Change A Select all that apply Fo rm R elia b ilit y F it N /A F u nc Tit le * This will be the name of the PCN f older Desc rip C hange R ea so n f o r C hange M AJO R A N D M IN O R C H AN GE I N FO RM ATIO N A Sp eci a pplic a ble ) * se e u nit e d sic .c o m D eta il o f Po te n Im pact t o C usto m er Q uali o r D ata ( if a pplic a ble ) C usto m er S a m ple s A va ila ble ( if a pplic a ble ) Q uali R esu lt s A va ila ble ( if a pplic a ble ) Id en C hanged P ro d uct (if applic a ble ) C om men ts a nd/o r 2 1 6/4 /2 021 D ix ie -A nn S in ne 1 2/3 1/2 021Assembly Sit e Trans fer -PSI T echnologies PSI T e ch no lo gie s is m ovin g f a cili c o m pan y I M I- I n te gra te d M ic ro -E le ctro nic s I n c. F u ll e le ctr ic a… download now
2021_PCN-21-27-28.pdf PCN Form - Pre-PCN-21 1/2 Product Change Notification PCN Number: PCN Date: Initiator: Implementation Date: PCN INFORMATION PCN Phase Pre Final Type of Change Major Minor Obsolescence PCN Requirement Customer Approval Required Customer No fica on Required No fica on Only Change Affects Select all that apply Form Reliability Fit N/A Func on Title Descrip on of Change Reason for Change MAJOR AND MINOR CHANGE INFORMATION Affected Product Specifica on (if applicable) *see unitedsic.com for datasheets Detail of Poten al Impact to Customer Qualifica on Plan or Data (if applicable) Customer Samples Available (if applicable) Qualifica on Results Available (if applicable) Iden fica on of Changed Product (if applicable) Supporting Data 21 6/4/2021 Dixie-Ann Sinnette 10/4/2021 Assembly Site Transfer-PSI Technologies PSI Technologies is moving facilities from Calamba Laguna to Binan Laguna facility which is owned by its parent company IMI- Integrated Micro-Electronics Inc. Full electrical characterization… download now
2021_PCN-8TEQJ-0187.pdf To Aug. 6 th, 2020 Document Management Number 8TEQJ-0187 Sato Manabu Planning and Design Department Manager E＆MC Business Division NIDEC COPAL ELECTRONICS CO., LTD. Discontinuation Notice fo r Slide Switches Dear all Best wishes and thank you for your continuous support. We are going to discontinue the sales of our slide switches below. Sorry for the inconvenience and hope for your understanding. Best re gards 1. Reason for the discontinuation Because it is going to be impossible to keep the efficiency of the production and the maintenance of the mold or equipment any more, we are going to discontinue the production. 2. Products to be discontinued and similar counterparts 3.Discontinuation schedule The deadline for the final order : September 30th, 2021 The expected date for the final shipment : December 28th, 2021 For inquiries regarding this matter, please contact our sales offices. The end No. Typ e Part number 1 Toggle Switch 8G1012 -Z 2 Toggle Switch 8G1014 -Z 3 Toggle Switch… download now
2021_PCN-084_2021_0-OMTS2131901&S2124601.pdf PCN-084_2021_0- OMTS2131901&S2124601 Page 1/5 Product Change Notification Sofia , 20 th Dec ember 2021 PCN-0 84_20 21_0-OMT S2131901&S2124601 Alternative raw material for plastic case & cover and for magnetic circuit HXS series Based on the JEDEC Standard JESD46 standard (latest release) , please kindly provide your approval for below change within 30 days. Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on HXS series. Concerned products : HXS 10 -NP/SP3; HXS 10 -NP/SP4; HXS 20 -NP; HXS 20 -NP/SP30; HXS 20-NP/SP7 ; HXS 50 -NP; HXS 50 -NP/SP6; PCN-084_2021_0- OMTS2131901&S2124601 Page 2/5 Chan ges: Description of the technical change s: Change 1: Second source plastic raw material for case and cover. This second source plastic raw material is an extension of the current used plastic… download now
2021_PCN-082_2021_0-OMTB2131202.pdf PCN-082_2021_0- OMTB213 1202 Page 1/6 Product Change Notification Beijing, 15 th Dec ember 2021 PCN-0 82_20 21_0-OMT B213 1202 Second s ources transistors H AL and HTA series Based on the JEDEC Standard JESD46 standard (latest release) , please kindly provide your approval for below change within 30 days. Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on HAL and HTA series . Concerned products : HAL 100- S; HAL 100- S/SP10; HAL 100-S/SP4; HAL 150- S; HAL 160- S/SP2; HAL 200- S; HAL 200- S/SP8; HAL 300- S; HAL 300- S/SP6; HAL 300 -S/SP9; HAL 400- S; HAL 400- S/SP10; HAL 50 -S; HAL 50 -S/SP1; HAL 500- S; HAL 600- S; HAL 600- S/SP7; HAL 750- S/SP1; PCN-082_2021_0- OMTB213 1202 Page 2/6 HTA 100- S; HTA 100- S/SP5; HTA 1000- S; HTA 1000- S/SP13; HTA 1000- S/SP16; HTA 1000- S/SP18; HTA 1000-… download now
2021_PCN-074_2021_0-OMTS2130101.pdf PCN-074_2021_0- OMTS2130101 Page 1/6 Product Change Notification Sofia , 08 th Dec ember 2021 PCN-0 74_20 21_0-OMT S2130101 Second sources Voltage reference regulator and operational amplifier LFxx10 series Based on the JEDEC Standard JESD46 standard (latest release) , please kindly provide your approval for below change within 30 days. Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on LFxx10 series. Concerned products : LF 210- S; LF 210- S/SP1; LF 210- S/SP11; LF 210-S/SP3; LF 210- S/SP5; LF 210-S/SPA0; LF 310- S; LF 310- S/SP10; LF 310- S/SP11; LF 310-S/SP14; LF 310-S/SP15; LF 310-S/SP16; LF 310- S/SP20; LF 310-S/SP6; LF 310- S/SPA0; LF 310-S/SPA1; LF 310-S/SPA2; LF 310-S/SPA4; LF 310-S/SPA5; LF 510- S; LF 510- S/SP13; LF 510-S/SP15; LF 510- S/SP2; LF 510-S/SP22; LF 510-S/SP23; LF… download now
2021_PCN-068_2021_0-OMTS2118601.pdf PCN-068_2021_0- OMTS2118601 Page 1/2 Product Change Notification Sofia , 24 th Novem ber 2021 PCN-0 68_20 21_0-OMT S2118601 Alternative second source plastic material for magnetic core protection LF510-S and LF1010-S series Based on the JEDEC Standard JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on LF510-S and LF1010- S series . Concerned products : LF 510- S; LF 510- S/SP13; LF 510- S/SP15; LF 510- S/SP2; LF 510-S/SP22; LF 510-S/SP23; LF 510-S/SP26; LF 510-S/SP27; LF 510- S/SP34; LF 510-S/SP35; LF 510 -S/SP5; LF 510- S/SPA0; LF 510 -S/SPA1; LF 510-S/SPA2; LF 510-S/SPA3; LF 510- S/SPA4; LF 510- S/SPA5; LF 1010- S; LF 1010- S/SP1; LF 1010- S/SP16; LF 1010- S/SP21; LF 1010- S/SP22; LF 1010- S/SP25; LF 1010- S/SP28; LF 1010- S/SP31; LF 1010- S/SP33; LF… download now
2021_PCN-068_2019_2-OMTB1930902.pdf PCN-068_2019_2 -OMTB1930902 Page 1/4 Product Change Notification Beijing, 27 th August 20 21 PCN-0 68_2019_ 2-OMT B1930902 Second source for Plastic Raw Material for coil formers, some struts on some LF 2005 models, core support on LF 2005 models LAC; LA305; LA205; LF2005; LA55; LA100P; LA25NP; LV25; LA55; LV25xx series CHANGE IS CANCELLED (SEE ON PAGE 3) Based on the JEDEC JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on LAC; LA305; LA205; LF2005; LA55; LA100P; LA25NP; LV25; LA55; LV25xx s eries. Concerned products: LAC 300- S; LAC 300- S/SP1; LAC 300 -S/SP10; LAC 300- S/SP2; LAC 300- S/SP3; LAC 300- S/SP4; LAC 300 -S/SP5; LAC 300- S/SP7; LAC 300 -S/SP8; LAC 300 -S/SP9; LA 205- S/SP1; LA 305- S/SP9; LF 2005- S/SP20; LF 2005- S/SP21; LF 2005- S/SP43;… download now
2021_PCN-062_2021_0-OMTB2125702.pdf download now
2021_PCN-061_2021_0-OMTB2104101.pdf PCN-061_2021_0 -OMT B21 041 01 Page 1/6 Product Change Notification Beijing, 30 th September 2021 PCN -061_2021_0-OMT B2104101 Second source high precision Resistors CAS -NP; CASR -NP; CKSR -NP series Based on the JEDEC Standard JESD46 standard (latest release), please kindly provide your approval for below change within 30 days. Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort t o improve the quality of its products, LEM intends to proceed to some modification on CAS -NP, CASR -NP and CKSR -NP series . Concerned product s: CAS 15 -NP; CAS 15 -NP/SP1; CAS 25 -NP; CAS 25 -NP/SP1; CAS 50 -NP; CAS 6 -NP; CASR 15 -NP; CASR 15 -NP/SP1; CASR 15 -NP/SP3; CASR 15-NP/SP6; CASR 25 -NP; CASR 25 -NP/SP1; CASR 25 -NP/SP3; CASR 25 -NP/SP6; CASR 50 -NP; CASR 50 -NP/SP1; CASR 50 -NP/SP3; CASR 50 -NP/SP6; CASR 6 -NP; CASR 6 -NP/SP1; CASR 6-NP/SP3; CASR 6 -NP/SP5; CASR 6 -NP/SP6; CKSR 15… download now
2021_PCN-040_2020_1-OMTB2013601.pdf PCN-040_2020_ 1-OMTB2013601 Page 1/3 Product Change Notification Beijing, 04 th March 20 21 PCN -040_20 20_1-OMT B2013601 Second source diodes HAT models Update with first date codes (see on page 2) Based on the JEDEC JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on HAT models . Concerned product s: HAT 1000 -S; HAT 1000 -S/SP1; HAT 1000 -S/SP24; HAT 1200 -S; HAT 1200 -S/SP1; HAT 1500 -S; HAT 1500 -S/SP1; HAT 1500 -S/SP23; HAT 1500 -S/SP24; HAT 1500 -S/SP100; HAT 200 -S; HAT 200 -S/SP1; HAT 400 -S; HAT 400 -S/SP1; HAT 500 -S; HAT 500 -S/SP1; HAT 500 -S/SP24; HAT 600 -S; HAT 600 -S/SP1; HAT 600 -S/SP23; HAT 750 -S; HAT 800 -S; HAT 800 -S/SP1; HAT 800 -S/SP100; HAT 1092 -S/SP6; HAT 1092 -T/SP17; HAT 1456 -S/SP6; HAT 1456 -T/SP17; HAT 163 -S/SP6; HAT 163… download now
2021_PCN-039_2021_1-OMTS2110401.pdf PCN-039_2021_1 -OMT S2110401 Page 1/3 Product Change Notification Sofia , 14 th February 2022 PCN-0 39_20 21_1-OMT S2110401 Magnetic circuit material second source and second supplier ART and RTXXX series – First date code Based on the JEDEC JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on ART and RTXXX series. Concerned products : ART -B22- D70; ART-B22- D70/SP1; ART -B22- D70/SP11; ART -B22- D70/SP12; ART -B22- D70/SP14; ART -B22- D70/SP15; ART -B22- D70/SP17; ART -B22- D70/SP18; ART -B22 -D70/SP19; ART -B22- D70/SP2; ART -B22- D70/SP20; ART -B22- D70/SP21; ART -B22 -D70/SP22; ART -B22- D70/SP23; ART -B22- D70/SP25; ART -B22- D70/SP26; ART -B22 -D70/SP27; ART -B22- D70/SP28; ART -B22- D70/SP29; ART -B22- D70/SP3; ART -B22- D70/SP30; ART -B22-… download now
2021_PCN-039_2021_0-OMTS2110401.pdf PCN-039_2021_0- OMTS2110401 Page 1/6 Product Change Notification Sofia , 20 th Ju ly 2021 PCN-0 39_20 21_0-OMT S2110401 Magnetic circuit material second source and second supplier ART and RTXXX series Based on the JEDEC JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on ART and RTXXX series. Concerned products : ART -B22- D70; ART-B22- D70/SP1; ART -B22- D70/SP11; ART-B22- D70/SP12; ART-B22- D70/SP14; ART -B22- D70/SP15; ART-B22- D70/SP17; ART -B22- D70/SP18; ART-B22 -D70/SP19; ART -B22- D70/SP2; ART -B22- D70/SP20; ART -B22- D70/SP21; ART -B22 -D70/SP22; ART -B22- D70/SP23; ART -B22- D70/SP25; ART -B22- D70/SP26; ART -B22 -D70/SP27; ART -B22- D70/SP28; ART -B22- D70/SP29; ART -B22- D70/SP3; ART -B22- D70/SP30; ART-B22- D70/SP31; ART -B22 -D70/SP32; ART… download now
2021_PCN-038_2021_1-OMTM2029302.pdf PCN-03 8_2021_ 1-OMT M2029302 Page 1/2 Product Change Notification Machida, 21 st September 2021 PCN -038_2021_1-OMT M2029302 Potting change HAR series – Date code Based on the JEDEC JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort t o improve the quality of its products, LEM intends to proceed to some modification on HAR series . Concerned product s: HAR 1000 -S; HAR 500-S/SP1; we confirm you that LEM is now producing the model HAR 1000-S according to the change explained on the next page and from the date code 421246. Explanation on the date code: “4” means the production center, here LEM in Japan (Machida) “21” means the year of the production, here the year 2021 “246” means the day of the production, here the 246 th day of the year 2021 (03 rd September 2021) PCN-03 8_2021_ 1-OMT M2029302 Page 2/2 Chan ge: Description of the… download now
2021_PCN-038_2021_0-OMTM2029302.pdf PCN-038_2021_0- OMTM2029302 Page 1/2 Product Change Notification Machida, 20 th Ju ly 2021 PCN-0 38_20 21_0-OMT M2029302 Potting change HAR series Based on the JEDEC JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on HAR series. Concerned products : HAR 1000 -S; HAR 500 -S/SP1; Chan ge: Description of the technical change : Current ELECTROLUBE potting material will be changed by High- speed-Sanyurec UF -1113 potting (the one LEM already uses for a lot of LEM models). To qualify this change , the qualification tests plan will be realized , as enclosed in annex file. Reason of the technical change: Electrolube current potting importation becomes too strict due to new environmental regulation from US (TSCA five PBT’s). PCN-038_2021_0- OMTM2029302 Page… download now
2021_PCN-034_2021_1-OMTB2115201.pdf PCN-034_2021_1 -OMTB2115201 Page 1/3 Product Change Notification Beijing, 12 th J anuary 202 2 PCN-0 34_20 21_1-OMT B2115201 Second source Zener diodes HAX series – First date code Based on the JEDEC JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on HAX series. Concerned products : HAX 1000 -S; HAX 1000- S/SP11; HAX 1000- S/SP13; HAX 1000 -S/SP18; HAX 1000- S/SP20; HAX 1200 -S; HAX 1200 -S/SP18; HAX 1200- S/SP21; HAX 1500 -S; HAX 1500 -S/SP11; HAX 1500- S/SP18; HAX 1500 -S/SP20; HAX 1500- S/SP21; HAX 2000 -S; HAX 2000 -S/SP18; HAX 2000- S/SP19; HAX 2000 -S/SP20; HAX 2000- S/SP21; HAX 2500 -S; HAX 2500 -S/SP18; HAX 2500- S/SP20; HAX 3000 -S; HAX 3000 -S/SP20; HAX 3000- S/SP22; HAX 4000 -S; HAX 500 -S; HAX 500 -S/SP11B; HAX 500-S/SP11C; HAX 5000 -S; HAX… download now
2021_PCN-034_2021_0-OMTB2115201.pdf PCN-03 4_2021_0 -OMTB2115201 Page 1/2 Product Change Notification Beijing, 11 th June 2021 PCN -034_2021_0-OMT B21152 01 Second source Zener diodes HAX series Based on the JEDEC JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on HAX series. Concerned product s: HAX 1000 -S; HAX 1000 -S/SP11; HAX 1000 -S/SP13; HAX 1000 -S/SP18; HAX 1000 -S/SP20; HAX 1200 -S; HAX 1200 -S/SP18; HAX 1200 -S/SP21; HAX 1500 -S; HAX 1500 -S/SP11; HAX 1500 -S/SP18; HAX 1500 -S/SP20; HAX 1500 -S/SP21; HAX 2000 -S; HAX 2000 -S/SP18; HAX 2000 -S/SP19; HAX 2000 -S/SP20; HAX 2000 -S/SP21; HAX 2500 -S; HAX 2500 -S/SP18; HAX 2500 -S/SP20; HAX 3000 -S; HAX 3000 -S/SP20 ; HAX 3000 -S/SP22; HAX 4000 -S; HAX 500 -S; HAX 500 -S/SP11B; HAX 500-S/SP11C; HAX 5000 -S; HAX 600 -S; HAX 800 -S;… download now
2021_PCN-032_2021_0-OMTM2033601.pdf PCN-032_2021_0- OMTM2033601 Page 1/3 Product Change Notification Machida , 07 th June 2021 PCN-0 32_20 21_0-OMT M2033601 Packaging tray design change HAR 1000 -S model Based on the JEDEC JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on HAR 1000-S model. Concerned product: HAR 1000 -S; Chan ge: Description of the technical change : Packaging tray design change. No change in the number of pieces in each packaging tray and in the final packaging box: 5 pieces per tray and 15 pieces per packaging box. Only the insertion direction of the products in the tray will be changed. The change has been qualified by free fall test as per the enclosed test report. Products position in the tray will be changed from vertical insertion to face insertion as represented… download now
2021_PCN-030_2018_1-OMTB1810301&B1811601.pdf PCN-030_2018_1 -OMTB1810301&B1811601 Page 1/3 Product Change Notification Beijing, 09 th June 20 21 PCN -030 _2018 _1-OMT B1810301&B1811601 Data sheet update: Aperture dimensions change ( CANCELLED) + PCB material change (DATE CODE , see page 2 ) HAT series Based on the JEDEC JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent ef fort to improve the quality of its products, LEM intends to proceed to some modification on HAT series . This letter is to notify you about our planned procedure to handle these change s. Concerned product s: HAT 200 -S; HAT 200 -S/SP1; HAT 400 -S; HAT 400 -S/SP1; HAT 500 -S; HAT 500 -S/SP1; HAT 500 -S/SP24; HAT 500 -S/SP105; HAT 600 -S; HAT 600 -S/SP1; HAT 600 -S/SP100; HAT 750 -S; HAT 800 -S; HAT 800 -S/SP1; HAT 800 -S/SP100; HAT 850 -S; HAT 1000 -S; HAT 1000 -S/SP1; HAT 1000 -S/SP18; HAT 1000 -S/SP24; HAT 1000… download now
2021_PCN-025_2021_0-OMTS2012801.pdf PCN-025_2021_0- OMTS2012801 Page 1/5 Product Change Notification Sofia , 20 th May 2021 PCN-0 25_20 21_0-OMT S2012801 Magnetic core material and supplier second source LF1010-S, LF2010-S and LF510 -S series Based on the JEDEC JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on LF1010- S, LF2010- S and LF510 -S series . Concerned products : All LF10 10-S models All LF2010- S models All LF510 -S models Chan ge: Description of the technical change : Magnetic core material and supplier second source. Magnetic performances provided by the magnetic core material second source are the same as the current used magnetic material. Tests plans which will be followed to qualify this second source are enclos ed in annexed files. PCN-025_2021_0- OMTS2012801 Page 2/5… download now
2021_PCN-019_2021_0-OMTB2023001.pdf PCN-019_2021_0- OMTB2023001 Page 1/2 Product Change Notification Beijing, 26 th March 2021 PCN-019_20 21_0-OMT B2023001 Some dimensions corrections on data sheets LA25NP , LA35NP , LV20 and LV25 series Based on the JEDEC JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on LA25NP , LA35NP , LV20 and LV25 series. Concerned products : LA 25- NP; LA 25- NP/SP11; LA 25 -NP/SP13; LA 25- NP/SP14; LA 25-NP/SP19; LA 25- NP/SP22; LA 25-NP/SP25; LA 25- NP/SP32; LA 25-NP/SP34; LA 25- NP/SP38; LA 25-NP/SP39; LA 25- NP/SP43; LA 25- NP/SP7; LA 25- NP/SP8; LA 25-NP/SP9; LA 35- NP; LA 35- NP/SP1 ; LA 35- NP/SP3; LV 20 -P; LV 25 -P; LV 25 -P/SP10; LV 25 -P/SP11; LV 25 -P/SP12; LV 25 -P/SP15; LV 25 -P/SP3; LV 25 -P/SP5; LV 25 -P/SP6; LV 25 -P/SP7; LV 25 -P/SP8;… download now
2021_PCN-016_2020_1-OMTB2006501.pdf PCN-01 6_2020_ 1-OMT B2006501 Page 1/3 Product Change Notification Beijing, 10 th May 20 21 PCN -016_2020_1-OMT B2006501 PCB supplier and PCB m aterial change LA25NP , LA35NP , LV20 and LV25 series First date code s Based on the JEDEC JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on LA25NP, LA35NP, LV20 and LV25 series . Concerned product s: LA 25 -NP; LA 25 -NP/SP11; LA 25 -NP/SP13; LA 25-NP/SP14; LA 25-NP/SP19; LA 25 -NP/SP22; LA 25 -NP/SP24; LA 25 -NP/SP25; LA 25 -NP/SP32; LA 25 -NP/SP34; LA 25 -NP/SP38; LA 25 -NP/SP39; LA 25 -NP/SP43; LA 25 -NP/SP44; LA 25 -NP/SP45; LA 25 -NP/SP7; LA 25-NP/SP8; LA 25-NP/SP9; LA 35 -NP; LA 35 -NP/SP1; LA 35 -NP/SP3; LV 20 -P; LV 25 -P; LV 25 -P/SP10; LV 25 -P/SP11; LV 25-P/SP12; LV 25-P/SP13; LV 25 -P/SP15; LV 25… download now
2021_PCN-004_2021_0-OMTB2029001.pdf PCN-004_2021_0 -OMTB2029001 Page 1/5 Product Change Notification Beijing, 13 th January 2021 PCN -004_20 21_0-OMTB 2029001 Case deformations improvement CAS -NP, CASR -NP and CKSR -NP series Based on the JEDEC JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on CAS-NP, CASR -NP and CKSR -NP series . Concerned product s: CAS 15 -NP; CAS 15 -NP/SP1; CAS 25-NP ; CAS 25 -NP/SP1; CAS 50 -NP; CAS 6 -NP; CASR 15 -NP; CASR 15 -NP KIT 3P; CASR 15-NP/SP1; CASR 15 -NP/SP3; CASR 15 -NP/SP6; CASR 25 -NP; CASR 25 -NP/SP1; CASR 25 -NP/SP3; CASR 25 -NP/SP6; CASR 50 -NP; CASR 50 -NP/SP1; CASR 50 -NP/SP3; CASR 50 -NP/SP6; CASR 6 -NP; CASR 6 -NP KIT 3P; CASR 6-NP/SP1; CASR 6 -NP/SP3; CASR 6-NP/SP5; CASR 6 -NP/SP6; CKSR 15 -NP; CKSR 15 -NP KIT 3P; CKSR 25 -NP; CKSR 25 -NP… download now
2021_IN-077_2021_0-OMTB2120301.pdf IN-0 77_2021_0- OMTB2120301 Page 1/3 Information Note Beijing, 13 th December 2021 IN -077 _2021_0-OMT B2120301 New injection molds for case/cover CASR-NP and CKSR-NP series Based on the JEDEC Standard JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear valued customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on CASR-NP and CKSR- NP series . Concerned products : CASR 15 -NP; CASR 15 -NP/SP1; CASR 15 -NP/SP3; CASR 15 -NP/SP6; CASR 25 -NP; CASR 25 -NP/SP1; CASR 25 -NP/SP3; CASR 25 -NP/SP6; CASR 50 -NP; CASR 50 -NP/SP1; CASR 50 -NP/SP3; CASR 50 -NP/SP6; CASR 6 -NP; CASR 6-NP/SP1; CASR 6 -NP/SP3; CASR 6 -NP/SP5; CASR 6 -NP/SP6; CKSR 15 -NP; CKSR 25 -NP; CKSR 25 -NP/SP3; CKSR 50 -NP; CKSR 50 -NP/SP1; CKSR 6 -NP; CKSR 75 -NP; IN-0 77_2021_0- OMTB2120301 Page 2/3 Chan ge: Description of the change : New molds… download now
2021_IN-065_2021_0-OMTGxxx.pdf IN-0 65_2021_0- OMTGxxx Page 1/9 Information Note Geneva, 05 th October 2021 IN -065 _2021_0-OMT Gxxx Swiss LEM Manufacturing factory move Various series and models Based on the JEDEC Standard JESD46 standard (latest release), please kindly provide your approval for below change within 30 days. Not for publication unless permission is granted by LEM Dear valued customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on Various series and models . Concerned products : CD 100 -S/SP1; CD 100-S/SP16; CD 100-S/SP18; CD 100 -S/SP4; CD 100 -S/SP5; CD 100- S/SP8; CD 1000- S/SP5; CD 1000- S/SP6; CD 1000- S/SP8; CD 1000- T/SP1; CD 1000- T/SP2; CD 1000- T/SP7; CD 25 -S/SP2; CV 3 -100/SP3; CV 3 -1000; CV 3- 1000/SP3; CV 3-1000 CAL ; CV 3 -1200; CV 3- 1500; CV 3 -200; CV 3- 200/SP5; CV 3- 200/SP6; CV 3-200/SP7; CV 3 -2000; CV 3 -500; IN-0 65_2021_0- OMTGxxx Page 2/9… download now
2021_IN-059_2021_0-OMTB2126501.pdf IN-059_2021_0- OMTB2126501 Page 1/4 Information Note Beijing, 29 th September 2021 IN -059 _2021_0-OMT B2126501 New copy injection molds CAS -NP; CASR-NP; CKSR- NP series Based on the JEDEC Standard JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear valued customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on CAS-NP, CASR -NP and CKSR- NP series. Concerned products : CAS 6 -NP; CAS 15 -NP/SP1; CAS 50 -NP; CAS 15 -NP; CAS 25 -NP/SP1; CAS 25 -NP; CASR 15 -NP; CASR 15 -NP/SP1; CASR 15 -NP/SP3; CASR 15 -NP/SP6; CASR 25 -NP; CASR 25 -NP/SP1; CASR 25 -NP/SP3; CASR 25 -NP/SP6; CASR 50-NP; CASR 50 -NP/SP1; CASR 50 -NP/SP3; CASR 50 -NP/SP6; CASR 6 -NP; CASR 6 -NP/SP1; CASR 6 -NP/SP3; CASR 6 -NP/SP5; CASR 6 -NP/SP6; CKSR 15 -NP; CKSR 25 -NP; CKSR 25 -NP/SP3; CKSR 50 -NP; CKSR 50 -NP/SP1; CKSR 6 -NP; CKSR 75 -NP;… download now
2021_IN-056_2021_1-OMTXXXXX.pdf IN-056 _2021_1 -OMT XXXXX Page 1/6 Information Note Genev a, 25 th November 2021 IN -056 _2021_ 1-OMT XXXXX LEM Products Packaging label information and layout modifications UPDATE on new label layout (see in red p . 4 and 5 ) ALL LEM products Based on the JEDEC Standard JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear valued customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on ALL LEM products. Concerned products : ALL LEM products Chan ge: Description of the change : LEM Products Packaging label information and layout modifications. 2D data matrix printing adding on LEM finished goods carton box label and standardization of the label layout (information + dimensions). These modifications will change the layout of the original labels, but will not impact customers to read the labels. IN-056 _2021_1… download now
2021_IN-056_2021_0-OMTXXXXX.pdf IN-056_2021_0 -OMT XXXXX Page 1/8 Information Note Genev a, 31st August 2021 IN -056 _2021_0 -OMT XXXXX LEM Products Packaging label information and layout modifications ALL LEM products Based on the JEDEC Standard JESD46 standard (latest release), please kindly provide your approval for below change within 30 days. Not for publication unless permission is granted by LEM Dear valued customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on ALL LEM products . Concerned product s: ALL LEM products Chan ge: ➢ Description of the change : LEM Products Packaging label information and layout modifications. 2D data matrix printing adding on LEM finished goods carton box label and standardization of the label layout (information + dimensions). These modifications will change the layout of the original labels, but will not impact customers to read the labels.… download now
2021_IN-052_2021_0-OMTB2120001.pdf IN-052_2021_0- OMTB2120001 Page 1/6 Information Note Beijing, 23 rd August 2021 IN -052 _2021_0-OMT B2120001 Injection molds and tooling refurbishment + new copy molds CASR-NP and CKSR-NP s eries Based on the JEDEC Standard JESD46 standard (latest release), please kindly provide your approval for below change within 30 days. Not for publication unless permission is granted by LEM Dear valued customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on CASR-NP and CKSR- NP series . Concerned products : CASR 15 -NP; CASR 15 -NP/SP1; CASR 15 -NP/SP3; CASR 15 -NP/SP6; CASR 25 -NP; CASR 25 -NP/SP1; CASR 25 -NP/SP3; CASR 25 -NP/SP6; CASR 50 -NP; CASR 50 -NP/SP1; CASR 50 -NP/SP3; CASR 50 -NP/SP6; CASR 6 -NP; CASR 6 -NP/SP1; CASR 6 -NP/SP3; CASR 6 -NP/SP5; CASR 6 -NP/SP6; CKSR 15 -NP; CKSR 25 -NP; CKSR 25 -NP/SP3; CKSR 25 -NP/SP3 T; CKSR 50 -NP; CKSR 50 -NP/SP1;… download now
2021_EOL-20211116.pdf Bussmann Division 114 Old State Road Ellisville, MO 63021 tel: 636 -394 -2877 fax: 800 -544 -2570 www.eaton.com/bussmannseries Date: November 16 , 2021 To: Bussmann series electric vehicle fuse customers Subject: End -of -life notification for EV10 -40 -1P and EV10 -50 - 1P fuses Dear valued customer: Effective immediately, the XEV10 -40 -1P and XEV10 -50 -1P fuses have been discontinued . Any remaining inventory will be available for sale until used up . Customers looking for replacement fuses in the EV family are encouraged to evaluate XEV10 -40 -T and XEV10 -50 -T. For further assistance in selecting a commercial equivalent product, contact Fusetech@Eaton.com , or your local Bussmann series product sales representative. Kind regards, Elon Brown Product Manager download now
2021_EOL-211003.pdf End of Life Notice EOL # : 211003 Product Affected : Chip Shunt Resistor - LRS0630 0.3m Ω/0.5m Ω/2m Ω/3m Ω/4m Ω Issue Date : 2021/10/19 Contact : ALL Customers Attachment: □ Yes ■ No 1. Introduction Viking will perform officially the End of Li fe to the product as below: Phase-out series: Chip Shunt Resistor - LRS0 630 0.3m Ω/0.5m Ω/2m Ω/3m Ω/4m Ω The reason of EOL: 1.It is difficult to make manganese copper or Karma material. 2.The product qualification rate is very low. 2. Planned Schedule Last buy date: 2022/3/31 3. Replacement Product N/A VIKING TECH CORPORATION No.70,Kuanfu N.Road,Hsin Chu Industrial Park,Hsin C hu Hsien 303,Taiwan,R.O.C. Q A Deputy Director : Ben Chang download now
2021_EOL-210601.pdf End of Life Notice EOL #: 210601 Issue Date: 2021/06/ 21 Product Affected: Thick Film Chip Resistor - CR Series Contact: All customers Attachment: □ Yes ▓ No 1. Introduction In order to provide the customers with higher quality products a nd the purpose of product planning , Viking will perform officially End of Life for Thick Film Chip Resistor - CR -62(0612 size) and CR -25(1225 size). 為了提供客戶 更 高品質 的產品且基於 產品規劃的目的 ， 我們 決定停止銷售 CR -62 (0612 size) 與 CR -25 (1225 size) 這兩項產品。 2. Last buy date: 20 21/12/18 最後接單日為 2021 年 12 月 18 日 3. Replacement Product Thick Film Chip Resist or (Wide Terminal) -CRW62 (0612 size) and CRW25(1225 size) . The differences between these peoducts are shown in below table. CR -62 /CR -25 與 CRW62 /CRW25 的比較 : CR -62 CRW62 CR -25 CRW25 外觀 Appearance 尺寸 Dimensions L 1.55 ±0.10 1.55± 0.10 3.20 ±0.15 3.20 ±0.20 W 3.10 ±0.15 3.00± 0.15 6.45 ±0.15 6.4 0±0.15 T 0.55 ±0.10 0.55± 0.10 0.90 ±0.15 0.65 ±0.15 D1 0.25 ±0.15 0.25± 0.15 0.60 ±0.30 0.40±0.20 D2 0.35 ±0.15 0.40±… download now
2021_EOL-008_2020_1.pdf EOL-008 _2020_1 Page 1/2 End of Life Notification (EOL) Geneva, 08 th Octo ber 202 1 EOL -008_2020 _1 LTS & LTSR series Not for publication unless permission is granted by LEM To our Valued Customers and Partners, As part of our continued focus toward providing our customers and partners the highest level of service, quality and security, LEM International announces the End of Life (“EOL”) of the below mentioned current transducer s on 31 st December 20 21. This is concerning the following model s: LTS 6 -NP, LTS 6 -NP/SP2, LTS 6 -NP/SP3, LTS 6 -NP/SP4 LTS 15 -NP, LTS 15 -NP/SP1, LTS 15 -NP/SP7 LTS 25 -NP, LTS 25 -NP/SP7 LTSR 6 -NP, LTSR 15 -NP, LTSR 25 -NP Hereafter the deadlines: Last call orders: 31 st December 2021 Obsolescence and last deliveries: 01 st May 202 2 Reason: We exten d the LTB and EOL dates for LTS and LTSR models further to a strong request from the market so that to allow him to complete its total final requirement estimation for the LTS and LTSR models before… download now
2021_APCN-SIL-5022021.pdf ADVISORY PRODUCT CHANGE NOTICE Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # Product Group: Vishay Siliconix/ November 1 7th, 20 21 - APCN -SIL -502202 1 SIC 461 -4 and SIC4 71-4 Datasheet Change s DESCRIPTION OF CHANGE: Correction of the minimum VDRV Supply voltage from 5.1V to 4.75V, and Maximum VDRV current from 50mA to 30mA. Datasheets change on Page 4. CLASSIFICATION OF CHANGE: Datasheet REASON FOR CHANGE: Correction EXPECTED INFLUENCE ON PERFORMANCE/QUALITY/RELIABILTY : There will be no effect on performance, quality or reliability. PRODUCT CATAGORY: ICs PART NUMBERS AFFECTED: SIC461ED -T1 -GE3, SIC462ED -T1 -GE3, SIC463ED -T1 -GE3, SIC464ED -T1 -GE3, SIC471ED -T1 -GE3, SIC472ED -T1 -GE3, SIC473ED -T1… download now
2021_Advanced-Notice-20210525.pdf Advance d Notice Littelfuse, Inc. 8755 West Higgins Road, Suite 500 Chicago, IL 60631 USA (773) 628 -1000 1 May 25, 2021 Advance d Notice for backend c hange for selected discrete IGBT s and MOSFET s To whom it may concern, Littelfuse would like to inform you about a future backend change for selected discrete IGBTs and MOSFETs . This change is a part of the consolidation effort for the backend manufacturing which will lead to improv e delivery time . The qualification of th is new backend manufacturing facility is expected to finish by the end of Q3 / 2021. The Country of Origin (CoO) will be China. An official Product Change Notification (PCN ) will be released as soon as the qualification data is available. DESCRIPTION OF CHANGE: Future change of the backend m anufacturing for selected discrete IGBTs and MOSFETs . FORM, FIT , FUNCTION CHANGES : No Form / Fit / Function change . Please refer to the next page which contains all the affected part numbers. If you have any additional… download now
2020_PTN_FJ_DSUB.pdf PTN - Product Termination Notification No.: Date: Originator: Subject: Related product: Description of change: Reason of change: decreasing worldwide demand Schedule: production is stopped in April 2020 your last orders shall be received until latest 31.03.2020 112019_FJ_DSUB 04.11.2019 A. Schaffarczyk Discontinued sales and manufacturing 21P-1.25FJ 21R-1.25FJ (LF)(SN) JSEY-9P-1A3F19-13 (LF)(SN) We are sorry to inform you that those products will be no longer available due to decreasing of market needs. We came to a conclusion that the target products shall be abolished and permanently terminated on the basis of our company`s policy. FB_7.5.3.2.3.1JST Deutschland GmbHKüferstr. 15D-73650 W interbach Phone: +49/7181/4007-0 e-mail: customer.service@jst.de www.jst.de register court: Amtsgericht Stuttgart HRB 280991CEO: Masao Yoshimura download now
2020_PTN-TC-006-Rev0.pdf Vishay Inter technology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Discontinuation of series: 572D DESCRIPTION OF CHANGE: Vishay will discontinue production of the 572D series. CLASSIFICATION OF CHANGE: Product termination REASON FOR CHANGE: The cost of dedicating and maintaining this product style /ser ies is no longer cost effective based on market demand . EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N/A PRODUCT CATAGORY: Solid Tantalum Capacitor PART NUMBERS/SERIES/FAMILIES AFFECTED: All 572D series products VISHAY BRAND(s) : VISHAY TIME SCHEDULE: Last Time Buy Date: December 1 5, 2020 Last Time Shipment Date: May 1 6, 2021 SAMPLE AVAILABILITY: N/A . There are several Vishay Tantalum Capacitor series which customers sh ould… download now
2020_PTN-TC-001-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O RL D ’ S L A R G E S T M AN U F A C T U R E R S O F D I S C R E T E S E M I C O N D U CT O R S A N D P A S SI V E C O M P O NE N T T58M0476M6R3C0300 and T58M0476M6R3C0500 Product Discontinuation DESCRIPTION OF CHANGE: Vishay will discontinue production of T58M0476M6R3C 0300 and T58M0476M6R3C0500, Polymer Surface Mount Chip Capac itors, Compact, Leadframeless Molded Type. CLASSIFICATION OF CHANGE: End of Life REASON FOR CHANGE: Process technology does not allow offering this pro duct in 0603 case with a consistent performance. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANC E: N/A PRODUCT CATAGORY: Tantalum Capacitors PART NUMBERS/SERIES/FAMILIES AFFECTED: T58M0476M6R3C0300 and T58M0476M6R3C0500 VISHAY BRAND(s): VISHAY TIME SCHEDULE: Last Time Buy Date: 07-Jul-2020 Last Time Shipment Date: 07-Feb-2021 SAMPLE… download now
2020_PTN-SIL-041-Rev0.pdf Product Group: SIL/Tue Dec 22, 2020/PTN-SIL-041-2020-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Conversion to Copper (Cu) Wire – SQ4946AEY DESCRIPTION OF CHANGE: The affected part number listed in this notification will be converted to a Copper wire material set. The new ordering code will be SQ4946CEY-T1_GE3, which has the exact same product performance, fit and form as SQ4946AEY-T1_GE3.There will be no change to the wafer fab or assembly location. There will be no changes to the parameters on the datasheet (reference: SQ4946CEY Doc #77342, Rev.B) - see included datasheet comparison for details. REASON FOR CHANGE: Standardization of materials EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: None PART NUMBERS/SERIES/FAMILIES AFFECTED: SQ4946AEY-T1_GE3 VISHAY BRAND(s): Vishay… download now
2020_PTN-SF-253-2020-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Sfernice CN1579 & CN1581 Obsolescence DESCRIPTION OF CHANGE: Obsolescence . In conformance with our Product Life management procedure, and due to lack of demand and production constraints , Sfernice Division is transferring CN1579 & CN1581 parts to an End of Product Life status. There are no recommended replacement products. CLASSIFICATION OF CHANGE: Product Obsolescence. REASON FOR CHANGE: Low demand , Rational ization of the product range for industrial efficiency . EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: not applicable . PRODUCT CAT EGORY: Resistors . PART NUMBERS/SERIES/FAMILIES AFFECTED: CN1579 & CN1581 . VISHAY BRAND(s): SFERNICE TIME SCHEDULE: Last Time… download now
2020_PTN- SF-251-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Li ncoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Sfernice Discontinuation of TFS, SA, SB, SC Series DESCRIPTION OF CHANGE: Obsolescence . In conformance with our Product Life management procedure, and due to lack of demand, Sfernice Division is transferring TFS series Temperature Sensors and SA/SB/SB series Current Sensing resistors to an End of Product Life status. Recommended replacement product for TFS : TFPT Series . CLASSIFICATION OF CHANGE: Product Obsolescence. REASON FOR CHANGE: Low demand , Rationalization of the product range in line with the market trend . EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PE RFORMANCE: not applicable . PRODUCT CAT EGORY: Resistors . PART NUMBERS/SERIES/FAMILIES AFFECTED: TFS* , SA *, SB*,… download now
2020_PTN-OSI-1127-Rev0.pdf Product Termination Notification Product Group: Opto Sensors & IRDC 14-JUL-2020 / PTN OSI-1127-2020 Rev. 0 TITLE: Product discontinuation of selected infrared emitting diodes Affected part numbers are announced for end of life . Recommened alternatives for the infrared emitters a re given in the attached file "PTN OSI-1127-2020 - alternatives.pdf". DESCRIPTION OF CHANGE: Product Obsolescence CLASSIFICATION OF CHANGE : low demand REASON FOR CHANGE : Infrared Emitters PRODUCT CATEGORY : PART NUMBERS / SERIES / FAMILIES AFFECTED: refer to detailed part numberlist S420P, TCZT8020, TSAL7200, TSKS5400S, V3712PH, V420P, VSMF288011(G/RG)X01, VSMF3700, VSMF3710, VSMF4710, VSMF4720, VSMF9700X01, VSMF970011X01, VSMG2700, VSMG2720, VSMG3700, VSMG3850X01, VSMS3700 VSMY1850-O, VSMY98545DS VISHAY SEMICONDUCTORS VISHAY BRAND(s): TIME SCHEDULE: Annotations about time schedule: Last Time Buy Date: 31-DEC-2020 Last Time Shipment Date: 03-JUL-2021 SAMPLES AVAILABLE BEGINNING : We need samples of… download now
2020_PTN-OMV-1160-Rev0.pdf Product Termination Notification Product Group: Opto Modules & Visibles 28-JAN-2021 / PTN OMV-1160-2020 Rev. 0 TITLE: Obsolescence of Products impacted by material obsolescence and Products with low sales The Products defined in this Product Termination No tice have reached their end of life and are being made obsolete DESCRIPTION OF CHANGE: Product Obsolescence CLASSIFICATION OF CHANGE : Obsolescence of the emitter die by the manufacturer . Parts with low sales. REASON FOR CHANGE : LEDs PRODUCT CATEGORY : PART NUMBERS / SERIES / FAMILIES AFFECTED: Little Star: VLMR71AAAC-GS08, VLMW712T2T3QN-GS08, VLMW712T3U3US- GS08, VLMW712U2U3XV-GS08, VLMY71AAAC-GS08 0603 white and blue selected parts using CREE die: TLMB1100-GS08, VLMW11R2S2-5K8L-08 3mm and 5mm LED selected parts using CREE die: TLHB4200, TLHB4201, TLHB4400, TLHB44K2M1, TLHB5100, TLHB5102, TLHB5400, TLHB5800 3mm white LEDs: VLHW4100, VLHW4101-YLWU, VLHW4400-JKPL, VLHW4400-LK NL, VLHW4400-QPMM PLCC2-Plus: VLMK51Z1AA-GS08,… download now
2020_PTN-OMV-1111-Rev0.pdf Product Termination Notification Product Group: Opto Modules & Visibles 12-MAR-2020 / PTN OMV-1111-2020 Rev. 0 TITLE: Discontinuation of UVC LED-series impacted by material obsolescence Discontinuation of VLMU60CL00-280-125 and VLMU35C*0 0-280-120 series. There will be new replacement types, all in 3535 pa ckage with the dimensions (L x W x H) in mm: 3.45 x 3.45 x 1.78: - VLMU60CL00-280-125 to be replaced by VLMU35CS10-2 75-120 - VLMU35CL00-280-120 to be replaced by VLMU35CS10-2 75-120 - VLMU35CM00-280-120 to be replaced by VLMU35CP10-2 75-120 DESCRIPTION OF CHANGE: Product Obsolescence CLASSIFICATION OF CHANGE : Obsolescence of the currently used UVC emitter die by the vendor REASON FOR CHANGE : LEDs PRODUCT CATEGORY : PART NUMBERS / SERIES / FAMILIES AFFECTED: VLMU60CL00-280-125, VLMU35CL00-280-120, VLMU35CM00- 280-120 VISHAY SEMICONDUCTORS VISHAY BRAND(s) : TIME SCHEDULE:Annotations about time schedule: Last Time Buy Date: 27-FEB-2020 Last Time Shipment Date: 15-APR-2020 SAMPLES… download now
2020_PTN-NLR-005-Rev1.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355- 2143 U.S.A. Phone (610) 644- 1300 Fax (610) 296- 0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT MKT010- 06 Thermistors Curve 4 Th rough Hole DESCRIPTION OF CHANGE: D ue to continuous reduction of manufacturing volumes and impacting the sustainability of the product line, Vishay has the intention to withdraw through hole thermistors produced using Curve 4, including both standard and custom parts. CLASSIFICATION OF CHANGE: Product Withdrawal REASON FOR CHANGE: Demand Decrease EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: N A PRODUCT CATEGORY: Resistors, Non -Linear , Dale Thermistors PART NU MBERS/SERIES/FAMILIES AFFECTED: 04B* / B04* 04C* / C04* 04M* / M04* 04T* / T04* A1308P, A1310P, A1583P, A3054F, A3113P, A 3154P VISHAY BRAND(s): Vishay Dale TIME SCHEDULE: Start Shipment Date : NA Las t Time Buy Date: May 31 st, 2021 Last… download now
2020_PTN-NLR-005-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355- 2143 U.S.A. Phone (610) 644- 1300 Fax (610) 296- 0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT MKT010- 06 Thermistors Curve 4 Though Hole DESCRIPTION OF CHANGE: Due to continuous reduction of manufacturing volumes and impacting the sustainability of the product line, Vishay has the intention to withdraw through hole thermistors produced using Curve 4, including both standard and custom parts. CLASSIFICATION OF CHANGE: Product Withdrawal REASON FOR CHANGE: Demand Decrease EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: N A PRODUCT CATEGORY: Resistors, Non -Linear , Dale Thermistors PART NU MBERS/SERIES/FAMILIES AFFECTED: 0 4B* / B0 4* 0 4C* / C0 4* 0 4M* / M0 4* 0 4T* / T0 4* A1308P, A1310P, A1583P, A3054F, A3113P, A1354P VISHAY BRAND(s): Vishay Dale TIME SCHEDULE: Start Shipment Date : NA Las t Time Buy Date: May 31 st, 2021… download now
2020_PTN-DR-00026-Rev0.pdf CONTACT INFORMATION: The Americas Europe Asia Vishay Americas Vishay Electronic Gmbh Vishay Intertechnology Asia Pte, Ltd One Greenwich Place Dr. Feli x-Zandman Platz 1 25 Tampines Street 92 Shelton, CT 06484 US A D-95100 Selb, German y Keppel Building #20-00 T: 203-452-5662 T: 49-9287-71 0 Singapore 528877 F: 203-452-5676 F: 49-9287-70435 T: 65-6788-6668 business-americas@vishay.com business-europe@vishay.com F: 65-6788-0988 business.asia@vishay.com Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT PRODUCT CATEGORY : Resistors Discrete PRODUCT IDENTIFICATION: Not Applicable QUALIFICATION DATA: Not Applicable For further information, please contact your regional Vishay office. EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: N/A ISSUE D BY: Kr ishna Gone ,… download now
2020_PTN-DR-00025-Rev1.pdf CONTACT INFORMATION: The Americas Europe Asia Vishay Americas Vishay Electronic Gmbh Vishay Intertechnology Asia Pte, Ltd One Greenwich Place Dr. Feli x-Zandman Platz 1 25 Tampines Street 92 Shelton, CT 06484 US A D-95100 Selb, German y Keppel Building #20-00 T: 203-452-5662 T: 49-9287-71 0 Singapore 528877 F: 203-452-5676 F: 49-9287-70435 T: 65-6788-6668 business-americas@vishay.com business-europe@vishay.com F: 65-6788-0988 business.asia@vishay.com Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT PRODUCT CATEGORY: Resistors Discrete For further information, please contact your regional Vishay office. ISSUE D B Y: Kr ishna Gone , Product Marketing Manager , E mail: Kr ishna.gone @vishay.com This PTN is considered approved, without fu rther notification,… download now
2020_PTN-DR-00025-Rev0.pdf CONTACT INFORMATION: The Americas Europe Asia Vishay Americas Vishay Electronic Gmbh Vishay Intertechnology Asia Pte, Ltd One Greenwich Place Dr. Feli x-Zandman Platz 1 25 Tampines Street 92 Shelton, CT 06484 US A D-95100 Selb, German y Keppel Building #20-00 T: 203-452-5662 T: 49-9287-71 0 Singapore 528877 F: 203-452-5676 F: 49-9287-70435 T: 65-6788-6668 business-americas@vishay.com business-europe@vishay.com F: 65-6788-0988 business.asia@vishay.com Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT PRODUCT CATEGORY : Resistors Discrete For further information, please contact your regional Vishay office. ISSUE D B Y: Kr ishna G one , Product Marketing Manager , E mail: Kr ishna.gone @vishay.com EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: N/A Product… download now
2020_PTN-DR-00021-Rev0.pdf CONTACT INFORMATION: The Americas Europe Asia Vishay Americas Vishay Electronic Gmbh Vishay Intertechnology Asia Pte, Ltd One Greenwich Place Dr. Feli x-Zandman Platz 1 25 Tampines Street 92 Shelton, CT 06484 US A D-95100 Selb, German y Keppel Building #20-00 T: 203-452-5662 T: 49-9287-71 0 Singapore 528877 F: 203-452-5676 F: 49-9287-70435 T: 65-6788-6668 business-americas@vishay.com business-europe@vishay.com F: 65-6788-0988 business.asia@vishay.com Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT PRODUCT CATEGORY : Resistors Discrete QUALIFICATION DATA: Not Applicable For further information, please contact your regional Vishay office. ISSUE D B Y: Kr ishna G one , Product Marketing Manager , E mail: Kr ishna.gone @vishay.com Product Group: Dale Resistors /… download now
2020_PTN-DR-00020-Rev1.pdf CONTACT INFORMATION: The Americas Europe Asia Vishay Americas Vishay Electronic Gmbh Vishay Intertechnology Asia Pte, Ltd One Greenwich Place Dr. Feli x-Zandman Platz 1 25 Tampines Street 92 Shelton, CT 06484 US A D-95100 Selb, German y Keppel Building #20-00 T: 203-452-5662 T: 49-9287-71 0 Singapore 528877 F: 203-452-5676 F: 49-9287-70435 T: 65-6788-6668 business-americas@vishay.com business-europe@vishay.com F: 65-6788-0988 business.asia@vishay.com Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT PRODUCT CATEGORY : Resistors Discrete VISHAY BRAND(s): Vishay Dale TIME SCHEDULE: Last Time Buy Date: May 2 2, 20 21; Last Time Ship Date: Nov . 22, 20 21 SAMPLE AVAI LABILITY: Not Applicable PRODUCT IDENTIFICATION: Not Applicable QUALIFICATION DATA: Not Applicable… download now
2020_PTN-DR-00016-Rev0.pdf Product Group: Dale Resistors / September 03, 2020/PTN‐DR‐00016‐2020 Rev 0 End of Life (EOL) Notification for all Infrared Touch Panels, associated components and sub‐assemblies DESCRIPTION OF CHANGE: Discontinuation of Infrared Touch Panels and all associated support products including repair options. CLASSIFICATION OF CHANGE: End of Life for all Infrared Touch Panels manufactured by Vishay Dale Electronics REASON FOR CHANGE: End of life / termination of production and repair. EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: N/A PRODUCT CATEGORY: LCD/Plasma/Touch/LED Display PART NUMBERS/SERIES/FAMILIES AFFECTED: TIP3216PAB00G01, TIP3216FAB060G01, TIP3220SAD01G01, TIP3220SAB01G01, TIP3224SBS08G01, TIP3526PCS03G01, TIP3526PCS16G01, 28179902B29, 28074702B29, 28101157B29. This will include all TIP3216, TIP3224, TIP3220, and TIP3526 families, components and sub‐ assemblies. VISHAY BRAND(s): Vishay Dale TIME SCHEDULE: … download now
2020_PTN-DR-00010-2020-Rev0.pdf CONTACT INFORMATION: The Americas Europe Asia Vishay Americas Vishay Electronic Gmbh Vishay Intertechnology Asia Pte, Ltd One Greenwich Place Dr. Feli x-Zandman Platz 1 25 Tampines Street 92 Shelton, CT 06484 US A D-95100 Selb, German y Keppel Building #20-00 T: 203-452-5662 T: 49-9287-71 0 Singapore 528877 F: 203-452-5676 F: 49-9287-70435 T: 65-6788-6668 business-americas@vishay.com business-europe@vishay.com F: 65-6788-0988 business.asia@vishay.com Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT PRODUCT IDENTIFICATION: Not Applicable QUALIFICATION DATA: Not Applicable Product Termination Of PH Series Resi stor s DESCRIPTION OF CHANGE: End of life of the commercial PH series wirewound resistors . VISHAY BRAND(s): Vishay Dale SAMPLE AVAI LABILITY: Not… download now
2020_PTN-DR-00002-2020_Rev0.pdf CLASSIFICATION OF CHANGE: ‘Product Termination’ For further information, please contact your regional Vishay office. CONTACT INFORMATION: The Americas Europe Asia Vishay Americas Vishay Electronic Gmbh Vishay Intertechnology Asia Pte, Ltd One Greenwich Place Dr. Feli x-Zandman Platz 1 25 Tampines Street 92 Shelton, CT 06484 US A D-95100 Selb, German y Keppel Building #20-00 T: 203-452-5662 T: 49-9287-71 0 Singapore 528877 F: 203-452-5676 F: 49-9287-70435 T: 65-6788-6668 business-americas@vishay.com business-europe@vishay.com F: 65-6788-0988 business.asia@vishay.com Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Product Group: Dale Resistors / January 21 , 20 20 / PTN-DR-0 000 2-20 20 Rev 0 DESCRIPTION OF CHANGE: End of life of the commercial, high volume… download now
2020_PTN-DD-022-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Product Obsolescence of SOD523 Zener, Schottky and ESD Diodes with replacement DESCRIPTION OF CHANGE: Vishay Diode s Division is discontinuing the assembly & final test of SOD - 523 packaged Zener, Schottky and ESD Diodes at current qualified subcontractor in S.Korea. Most of the product s have replacement available in the same package manufactured by our qualified subcon in China (please refer to table below). CLASSIFICATION OF CHANGE: Product Obsolescence REASON FOR CHANGE: Production line consolidation. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: There will be no effect on quality, reliability or electrical performance PRODUCT CAT EGORY: Diodes PART NU… download now
2020_PTN-DD-013-2020-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Product Obsolescence DESCRIPTION OF CHANGE: Vishay Semiconductors will discontin ue some ESD Diodes Part Numbers . CLASSIFICATION OF CHANGE: Product Obsolescence REASON FOR CHANGE: Low business and Portfolio Consolidation EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N/A PRODUCT CAT EGORY: Diodes PART NU MBERS/SERIES/FAMILIES AFFECTED: Obsolete Part Number Nearest Replacement Part Number VBUS03M1 -DD1 -G3 -08 VBUS05L1 -DD1 -G-08 VBUS05M1 -DD1 -G3 -08 VBUS05L1 -DD1 -G-08 VCUT03F1 -HD0 -G4 -08 VCUT03E1 -SD0 -G4 -08 VCUT05F1 -HD0 -G4 -08 VCUT05E1 -SD0 -G4 -08 VCUT0610AHD1 -G3 -08 VCUT0714A -HD1 -GS08 VCUT0714AHD1 -G3 -08 VCUT0714A -HD1 -GS08 VISHAY BRAND(s): Vishay… download now
2020_PTN-DD-002-2020-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T P roduct Obsolescence DESCRIPTION OF CHANGE: Due to the End Of Life notification of some IGBT chips from our supplier, Vishay Semiconductor s has to discontinue some power module part numbers . Vishay is working to qualify alternate solutions for below obsolete Part Number s. Customers are invited to contact Vishay to check the availability of alternates of the items of your interest. CLASSIFICATION OF CHANGE: Product Obsolescence REASON FOR CHANGE: Discontinued supply of IGBT dice EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N/A PRODUCT CAT EGORY: Modules PART NUMBERS/SERIES/FAMILIES AFFECTED: Obsolete Part Number Replacement Part Number VS -20MT120UFP NA VS… download now
2020_PTN-DBR-00001-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D ’ S L AR G E S T M AN U F A CT U R E R S O F D I S C R E T E S E M I CO N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # Product Discontinuation - Film Trimmer Potentiometers DESCRIPTION OF CHANGE: Series D12/70H, D13A/61C, D13A/61H, D16/66W, D17C/6 5H, D19/52KH, D23/55U, D26/58IH, E08/73WTD, E10/70WTD, E13/63C/H, E15C/70TR-K of film trimmer potentiometers will be discontinued without replacement. CLASSIFICATION OF CHANGE: Product obsolescence (End of Life) REASON FOR CHANGE: Unviable and non profitable manufacturing due to lo w market demand EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANC E: Not applicable PRODUCT CATAGORY: Potentiometer, Discrete PART NUMBERS/SERIES/FAMILIES AFFECTED: Part Number Ranges: D1259, D12A9, D12C9, D13A9, D16A9, D1729, D192.., D 1989, D23A9, D2659, E0829,… download now
2020_PTN-DBR-00001-2020_Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D ’ S L AR G E S T M AN U F A CT U R E R S O F D I S C R E T E S E M I CO N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # Product Discontinuation - Film Trimmer Potentiometers DESCRIPTION OF CHANGE: Series D12/70H, D13A/61C, D13A/61H, D16/66W, D17C/6 5H, D19/52KH, D23/55U, D26/58IH, E08/73WTD, E10/70WTD, E13/63C/H, E15C/70TR-K of film trimmer potentiometers will be discontinued without replacement. CLASSIFICATION OF CHANGE: Product obsolescence (End of Life) REASON FOR CHANGE: Unviable and non profitable manufacturing due to lo w market demand EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANC E: Not applicable PRODUCT CATAGORY: Potentiometer, Discrete PART NUMBERS/SERIES/FAMILIES AFFECTED: Part Number Ranges: D1259, D12A9, D12C9, D13A9, D16A9, D1729, D192.., D 1989, D23A9, D2659, E0829,… download now
2020_PTN-CC-00005-2020-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters: 63 Lancaster Avenue, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E OF TH E W OR LD ’S L AR GE S T M AN U F AC TU R E R S O F D IS C R E T E S E M IC ON D U C TOR S AN D P AS S IV E C OM P ON E N T S Product Group : Vis hay Ceramic Capacitors / April 19 , 2020 / PTN -CC -00005 -2020 Rev 0 Obsolescence of certain Cera -Mite products with low sales DESCRIPTION OF CHANGE: By submitting this notice Vishay is announcing that the product s listed herein have reached their end of life and will be withdrawn from the market. CLASSIFICATION OF CHANGE: Product Obsolescence REASON FOR CHANGE: The low demand for these products in the market has rendered these parts unfeasible to continue to support . EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N/A PRODUCT CATAGORY: Ceramic Capacitors PART NUMBERS/SERIES/FAMILIES AFFECTED: Please refer to parts list starting on page 2. VISHAY BRAND(s): Vishay… download now
2020_PS6_PSx6.pdf MAIN FEATURESSelf extinguishable plastic UL 94V-0 (PS-6). Carbon resistive element. Specifically designed for leadfree reflow soldering processes (excellent performance). Moisture sensitivity level 1 (PS-6). Embossed tape according to IEC 60286-3:2007. Long life model for low cost control potentiometer applications. Wiper positioned at initial, 50% or fully clockwise. MECHANICAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS * Others upon request Residual resistance: Operating temperature: PS-6: 40°C + 85°C PSX-6: 25°C + 70°C Full traceability. Torque: 0.2 to 2 Ncm. (0.3 to 2.7 in-oz) Stop torque: > 4 Ncm. ( >7 in-oz) www.piher.net HOW TO ORDER IP54 protection according to IEC 60529. Also upon request: Part number examples: PS6KV50-103A3030: PS6 model with K rotor, V50 mounting type, 10K ohm resistive value, linear taper and 30% tolerance. PS6WV40-502A2525-06AZ-PF: PS6 model with inserted knob fig. 6, 5K ohm resisitive value, linear taper, 25% tolerance, color of the… download now
2020_PDN_2020-004.pdf page 1 of 1 4.14F14 a P RODUCT D ISCONTINUATION N OTICE PDN No.: 20 20 /004 IXYS product type: Type Recommended replacement MUBW50 -06A8 no replacement MUBW75 -06A8 MUBW100 -06A8 MWI100 -06A8 MWI150 -06A8 MWI200 -06A8 Reason : Die discontinuation Last time order date: 2020 -06 -20 Last time delivery date: 20 20 -12 -31 Internal Reference: PO_2020 -004 In case of any question, please contact Initiator Title/Function Date e-mail Andreas Laschek -Enders PM April 6 th 2020 alaschek -enders@littelfuse.com IXYS Semiconductor GmbH Edisonstr. 15 D-68623 Lampertheim Phone: +49 -6206 -503 -201 Fax: +49 -6206 -503 -627 Customer response: (please fill in and return by e -mail, fax or mail within 4 weeks) for further questions / information Company: _____________________________________________ ____________ please comment Name & Position: _________________________________________________________ Phone / Fax No.: _________________________________________________________ Comments:… download now
2020_PDN-2020-009.pdf page 1 of 1 4.14F14a P RODUCT D ISCONTINUATION N OTICE PDN No.: 2020/009 IXYS product type: Type Recommended replacement VUO70-16NO7 - Reason: Low demand Last time order date: 31.12.2020 Last time delivery date: 31.03.2021 Internal Reference: PO_2020-009 In case of any question, please contact Initiator Title/Function Date e-mail Ostmann PM 16.06.2020 hostmann@littelfuse.com IXYS Semiconductor GmbH Edisonstr. 15 D-68623 Lampertheim Phone: +49-6206-503-xxx Fax: +49-6206-503 -627 Customer response: (please fill in and return by e-mail, fax or mail w ithin 4 weeks) for further questions / information Company: ___________________________________________________ ______ please comment Name & Position: ___________________________________________________ ______ Phone / Fax No.: ___________________________________________________ ______ Comments: ___________________________________________________ ___________________________________________________… download now
2020_PDN-2020-005.pdf page 1 of 1 4.14F14 a P RODUCT D ISCONTINUATION N OTICE PDN No.: 20 20 /00 5 IXYS product type: Type Recommended replacement MUBW 10 -06A 7 no replacement MUBW 15-06A 7 MUBW 20 -06A 7 MUBW 30 -06A 7 MUBW 50-06A 7 MWI 30 -06A 7 / MWI30 -06A 7T MWI30 -06A 7-S MWI 50-06A 7 / MWI 50-06A 7T MWI 50-06A 7-S MWI 75 -06A 7 / MWI 75 -06A 7T MKI50 -06A7 / MKI50 -06A7T MKI65 -06A7T MKI75 -06A7 / MKI75 -06A7T Reason : Die discontinuation Last time order date: 2020 -06 -20 Last time delivery date: 20 20 -12 -31 Internal Reference: PO_2020 -00 5 In case of any question, please contact Initiator Title/Function Date e-mail Andreas Laschek -Enders PM April 6 th 2020 alaschek -enders@littelfuse.com IXYS Semiconductor GmbH Edisonstr. 15 D-68623 Lampertheim Phone: +49 -6206 -503 -201 Fax: +49 -6206 -503 -627 Customer response: (please fill in and return by e -mail, fax or mail within 4 weeks) for further questions / information Company: _________________________________________________________ please… download now
2020_PDN-2020-001.pdf page 1 of 1 4.14F14a P RODUCT D ISCONTINUATION N OTICE PDN No.: 2020/001 IXYS product type: Type Recommended replacement VBO13-08NO2 VBO25-12NO2 VBO13-12AO2 VBO25-16AO2 VBO13-12NO2 VBO25-12NO2 VBO13-16AO2 VBO25-16AO2 VBO13-16NO2 VBO25-16NO2 VBO20-08NO2 VBO25-12NO2 VBO20-12AO2 VBO25-16AO2 VBO20-12NO2 VBO25-12NO2 VBO20-16AO2 VBO25-16AO2 VBO20-16NO2 VBO25-16NO2 VBO25-08NO2 VBO25-12NO2 VBO25-12AO2 VBO25-16AO2 Reason : Last time order date: 30.09.2020 Last time delivery date: 31.12.2020 Internal Reference: PO_2020-001 In case of any question, please contact Initiator Title/Function Date e-mail Ostmann PM 23.03.2020 hostmann@littelfuse.com IXYS Semiconductor GmbH Edisonstr. 15 D-68623 Lampertheim Phone: +49-6206-503-xxx Fax: +49-6206-503 -627 Customer response: (please fill in and return by e-mail, fax or mail w ithin 4 weeks) for further questions / information Company: ___________________________________________________ ______ please comment Name & Position:… download now
2020_PCN_Substituting-shape-of-convex-cover-of-capacitor.pdf Contact Letter TO ECOMAL Subject Apply for substituting the shape of the convex rubber cover of the capacitor Issuing company Teapo Electronics (Dongguan) Co. Ltd GM Qualit y Directo r De put y GM Pre pared b y Wee Meng Standly Tsao Jupiter Jiang Haili 2020 Year Content: 1. For your order of KSJ227M6R3CVH5G07K, KSJ227M6R3T2H5G07K, due to the damage of the abrasive tools of the manufacturer, and the manufacturer of rubber cover will not open the mould again, so the rubber cover is change to produce in circular shape. 2. The comparison of the rubber cover is as follows. The material and physical characteristics are the same, only the shape of the convex plate is different. Type Visual Outer diameter of convex plate The thickness of convex plate Original fan-shaped 5.0±0.05 0.8±0.1 Substitute circular 5.0±0.05 0.8±0.1 Layout drawing of original Layout drawing of substitute 3. We guarantee to you that the material and physical characteristics of the substitute rubber cover… download now
2020_PCN_Shape-substitution-of-capacitor-cover.pdf Contact Letter TO ECOMAL Subject Apply for substituting the shape of the convex rubber cover of the capacitor Issuing company Teapo Electronics (Dongguan) Co. Ltd GM Quality Director Deputy GM Prepared by Wee Meng Standly Jupiter Jiang Haili 2020 Year 3 Month 28 Day Content: 1. For your order of KSJ227M6R3CVH5G07K, KSJ227M6R3T2H5G07K, due to the damage of the abrasive tools of the manufacturer, and the manufacturer of rubber cover will not open the mould again, so the rubber cover will be changed to produce in circular shape. 2. The comparison of the rubber cover is as follows. The material and physical characteristics are the same, only the shape of the convex plate is different. Type Visual Outer diameter of convex plate The thickness of convex plate Original fan-shaped 5.0±0.05 0.8±0.1 Substitute circular 5.0±0.05 0.8±0.1 Layout drawing of original Layout drawing of substitute 3. We guarantee to you that the material and physical characteristics of the substitute… download now
2020_PCN_Reel_360d.pdf Piher Sensors & Con trol s SA Pol ίgono Industrial Municipal, Vial T2, No 22, 31500 Tudela, Nava rra, Spain Piher is an Amphneol TM comp any. RM Navarra Tomo 551, Folio 7, Hoja 5.580 CIF/VAT E SA31169907 Tel: +34 948 820 450 Fax: +34 948 824 050 www.piher.net PCN rev 1 / Page 1 of 1 Pr oduct Change Notice Our supplier has recent ly notified us that they will be unable to continue to deliver the current white ø360mm reel , so p lease be informed that we are rep lacing it by a new black one with ø380mm diameter . This chang e only affects to the diameter and color of the reel . Width and any other mechanical or electrical specifica tion of the reel remain unchanged. Please note that minimum packaging units (MPU) and minim um order quantities (MOQ ) may change. We are contacting c ustomers to provide further information. INVOLVED ARTICLES: some models of ST-15, MTS -360 , N15 , PS -15 and PSC -15 . SAMPLES AVAILABILITY DATE: immediately. FIRST DATE TO SHIP CHANGED PA RTS: when current… download now
2020_PCN-USA2020-006.pdf IF 0208 REV C 1 of 2 PRODUCT CHANGE NOTIFICATION (PCN) # USA 20 20-00 6 IXYS HAS FOUND IT NECESSARY TO IMPLEMENT A PRODUCT CHANGE. THIS NOTIFICATION IS TO INFORM YOU OF THE CHANGE WHICH MAY AFFECT YOUR PRODUCT/S. IXYS REQUESTS A WRITTEN RESPONSE WITHIN 30 DAYS OF DATE OF T HIS PCN. IF NO RESPONSE IS RECEIVED IXYS WILL CONSID ER THIS CHANGE APPROVED. SUBJECT : Molding Co mp ound Ch ange : TO26 3-7L, TO -264 , TO - 252 DOC -NUMBER: USA20 20 -00 6 TYPE OF DOCUMENT: Notification of Change for Open Distribution; C ustomers, Distributors, W eb page REVISION: Or igin al release BILL OF MATERIAL MANUFACTURING INSTRUCTION DRAWING OTHER REVISION DATE: December 08 , 2020 DESCRIPTI ON OF CHANGE: As previously communicate d to o ur cus tomers, Sams ung SDI has decided to exit the EMC material business and as a result we have qualif ied a n alternate mo lding compound for the T O- 263 -7L , TO -220FP, and TO -252 package s. TO -263 -7L TO-252 TO -264 From: Samsung SL7300 HXM SL 7300HD2 ST 7100HK To:… download now
2020_PCN-USA2020-005.pdf IF 0208 REV C 1 of 2 PRODUCT CHANGE NOTIFICATION (PCN) # USA 20 20 -00 5 IXYS HAS FOUND IT NECESSARY TO IMPLEMENT A PRODUCT CHANGE. THIS NOTIFICATION IS TO INFORM YOU OF THE CHANGE WHICH MAY AFFECT YOUR PRODUCT/S. IXYS REQUESTS A WRITTEN RESPONSE WITHIN 30 DAYS OF DATE OF T HIS PCN. IF NO RESPONSE IS RECEIVED IXYS WILL CONSID ER THIS CHANGE APPROVED. SUBJECT : TO -220FP Molding Co mp ound Ch ange DOC -NUMBER: USA20 20 -00 5 TYPE OF DOCUMENT: Notification of Change for Open Distribution; C ustomers, Distributors, Webpage REVISION: Or igin al release BILL OF MATERIAL MANUFACTURING INSTRUCTION DRAWING OTHER REVISION DATE: September 07 , 2020 DESCRIPTI ON OF CHANGE: As previously communicate d to our cus tomers, Samsun g SDI has decided to exit the EMC material business and as a result we have qualifed a n alternate mo lding compound for the T O- 220FP package. Molding Compound From: Samsung SL7300 HXM To: KCC KTMC 30 97 GX Please refer to next page for the list of affected part numbers.… download now
2020_PCN-TR-20017_G20-01221.pdf PCN - Product Change Notification No.: Date: Originator: Subject: Related product: Should you have any issues within this PCN, please contact us within the next 30 days. No response will be deemed as your acceptance. This document or attachment contains information that is proprietary to J.S.T. and shall not be used or shown without written permission. Reason of change: Due to increasing number of order to meet smooth delivery response to customers. New assembly machine for ZRO connector 36-circuits shall be added. The production method and the product quality control are equivalent to those of the current production. Description of change: schedule: step by step TR-20017_G20-01221 02.03.2020 A. Schaffarczyk ZRO 36-circuit male housing Addition of assembly machine S36B-ZROK-2A-R FB_7.5.3.2.3.1JST Deutschland GmbHKüferstr. 15D-73650 W interbach Phone: +49/7181/4007-0 e-mail: customer.service@jst.de www.jst.de register court: Amtsgericht Stuttgart HRB 280991CEO: Masao Yoshimura download now
2020_PCN-TF-002-Rev0.pdf Pr oduct Group: Vishay Dale Thin Film / October 9. 2020 / PCN -TF-002 -2020 Rev 0 Additional Molding Source for VSSR, VSOR and VTSR DESCRIPTION OF CHANGE: Vishay Dale Thin Film (VTF) is implementing the use of an additi onal mold house for the manufacture of VSSR, VSOR and VTSR products. This mold house currently manufactures VTF’s NOMC and OSOP products. CLASSIFICATION OF CHANGE: Assembly Site, Markin g, Molding/Coating & Test Site REASON FOR CHANGE: Reduce lead times due to supply chain complications with current mold house caused by Covid -19. Proposed mold house is both ISO 9001 and IATF 16949 certified. EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: No change to fit, form, function or reliability. PRODUCT CATEGORY: Resistor PART NUMBERS/SERIES/FAMILIES AFFECTED: VSSR, VSOR and VTSR VISHAY BRAND(s): Vishay Dale Thin Film TIME SCHEDULE: Start Shipment Date: October 30, 2020 Last Time Buy Date: Not Applicable Last Time Shipment Date: Not Applicable SAMPLE AVAILABILITY:… download now
2020_PCN-TF-001-Rev0.pdf Product Group: Thin Film / August 25 , 2020 / PCN -TF -00 1-20 20 Rev 0 Thin Film 2010 Case Size Carrier Tape DESCRIPTION OF CHANGE: Vishay Dale Thin Film is changing carrier tape design for all Thin Film Wrap product in the 2010 case size to improve manufacturability. Only pocket width is changing , no change to pocket depth , pitch , vendor or material . New tape style is listed as 12mm double pitch on Page 1 in Document Number 60034 (Tape and Reel Specifications) on the Vishay website. Cavity size for 2010 case size on Page 2 changes from 0.111 x 0.220 inches to 0.116 x 0.2 28 inches. CLASSIFICATION OF CHANGE: Packaging REASON FOR CHANGE: Improve manufacturability packaging time. The current carrier tape pocket tolerances are too tight for automated pick and place, resulting in multiple placement errors and increased machine downtime to adjust and properly place parts in each pocket . EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: None . PRODUCT CATEGORY: Resistors PART… download now
2020_PCN-TF-00002-Rev0.pdf Pr oduct Group: Vishay Dale Thin Film / October 9. 2020 / PCN -TF-00 00 2-2020 Rev 0 Additional Molding Source for VSSR, VSOR and VTSR DESCRIPTION OF CHANGE: Vishay Dale Thin Film (VTF) is implementing the use of an additional mold house for the manufacture of VSSR, VSOR and VTSR products. This mold house currently manufactures VTF’s NOMC and OSOP products. CLASSIFICATION OF CHANGE: Assembly Site, Markin g, Molding/Coating & Test Site REASON FOR CHANGE: Reduce lead times due to supply chain complications with current mold house caused by Covid -19. Proposed mold house is both ISO 9001 and IATF 16949 certified. EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: No change to fit, form, function or reliability. PRODUCT CATEGORY: Resistor PART NUMBERS/SERIES/FAMILIES AFFECTED: VSSR, VSOR and VTSR VISHAY BRAND(s): Vishay Dale Thin Film TIME SCHEDULE: Start Shipment Date: October 30, 2020 Last Time Buy Date: Not Applicable Last Time Shipment Date: Not Applicable SAMPLE AVAILABILITY:… download now
2020_PCN-TC-013-Rev0.pdf Vishay Intertec hnolo gy, Inc. Corporate Headquarter s 63 Linco ln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T U nification of Marking styles for T52 series DESCRIPTION OF CHANGE: Change Marking style for T52 M1 and E5 cases with same style of T52 M9 case. CLASSIFICATION OF CHANGE: Marking REASON FOR CHANGE: Process Unification EXPECTED INFLUENCE ON QU ALITY/RELIABILTY/PERFORMANCE: No PRODUCT CAT EGORY: Tantalum Capacitors PART NUMBERS/SERIES/FAMILIES AFFECTED: T52 series VISHAY BRAND(s): Vishay Sprague TIME SCHEDULE: Start Shipment Date: January 21 , 2021 Vishay reserves the rights to use both mark ing s tyles fo r transition period SAMPLE AVAILABILITY: Upon Request PRODUCT IDENTIFICATION: N/A QUALIFICATION DATA: N/A This PCN is considered approved, without further notification,… download now
2020_PCN-TC-002-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com O N E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Change of surface coating of Lead Frame for T52 series, case sizes E5 and M1 (for information only) DESCRIPTION OF CHANGE: Minor surface coating change . CLASSIFICATION OF CHANGE: Wafer/Chip/Pellet Process/Structure REASON FOR CHANGE: Improvement of mechanical performance EXPECTED INFLUENCE ON QUALITY/RELIABIL ITY/PERFORMANCE: There is no effect on quality and reliability. PRODUCT CAT EGORY: Tantalum Capacitors PART NU MBERS/SERIES/FAMILIES AFFECTED: Polymer T52 series, case sizes E5 and M1, See attached listing . VISHAY BRAND(s): VISHAY TIME SCHEDULE: Start Shipment Date: February 3, 20 20 (Vishay reserves the right to use both LF types until stock depletion of current LF… download now
2020_PCN-SIL-4042020-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # Product Group: Vishay Siliconix/ May 22, 2020 /PCN -SIL -4042020 Rev0 End of Life Notification for Vishay Siliconix PDIP18, PDIP20 and PDI P28 Analog Switch ICs DESCRIPTION OF CHANGE: Vishay Sili conix announces the end of life of Plastic DIP Packages 18, 20 and 28 Pins Analog Switches CLASSIFICATION OF CHANGE: Product Obsolescence REASON FOR CHANGE: Obsolescence of Assembly EXPECTED INFLUENCE ON PERFORMANCE /QUALITY/RELIABILTY : N/A PRODUCT CATAGORY: ICs PART NUMBERS AFFECTED: VISHAY BRAND(s): Vishay -Siliconix TIME SCHEDULE: Immediately. There are no more assembly site available. This PT N is for notification purposes only. Your response is not required. If you… download now
2020_PCN-SIL-403-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # Product Group: Vishay Siliconix/ April 6 , 2020 /PCN -SIL -403 2020 SIP32419 and SIP32429 Improvement DESCRIPTION OF CHANGE: Internal logic circuit reset delay time is adjusted during power off to be aligned with fault alert off. CLASSIFICATION OF CHANGE: Wafer Design REASON FOR CHANGE: Improvement. Power Off Internal Reset Delay Time Adjustment EXPECTED INFLUENCE ON PERFORMANCE /QUALITY/RELIABILTY : Elimination of possible single short glitch on /FLG signal pin during switch power off. There will be no effect on Performance , quality or reliability. PRODUCT CATAGORY: ICs PART NUMBERS AFFECTED: SIP32419DN -T1 -GE4 , SIP32419DWF , SIP32429DN -T1 -GE4 VISHAY… download now
2020_PCN-SIL-401.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # Product Group: Vishay Siliconix/ February 21, 2020 /PCN -SIL -4012020 Additional Assembly Capacity for Vishay Siliconix ICs SC70, SO16, SO28, TSOP6 and TSSOP16 packages DESCRIPTION OF CHANGE: Vishay Siliconix has expanded assembly capacity for SC70, SO16, SO28, TSOP6 and TSSOP16 packages to Subcon tractor UTAC in Thailand. CLASSIFICATION OF CHANGE: Assembly Site REASON FOR CHANGE: Additional assembly Capacity EXPECTED INFLUENCE ON PERFORMANCE /QUALITY/RELIABILTY : There will be no effect on performance, quality or reliability. PRODUCT CATAGORY: ICs PART NUMBERS AFFECTED: See list attached VISHAY BRAND(s): Vishay -Siliconix TIME SCHEDULE: Shipment of products will… download now
2020_PCN-SIL-048-Rev0.pdf Advisory – Datasheet Updates Product Group: Vishay Siliconix /October 28 th 2020 / PCN- SIL-0482020 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Part Numbers: Si7415DN-T1-GE3 Update from Datasheet Rev F to Rev G Dear Valued Customer: As a part of Vishay Siliconix commitment to Quality, we would like to extend to you a courtesy notification of a correction of datasheet for Vishay part number Si7415DN-T1-GE3. The objective of this Advisory is to correct erroneous Switching typical and max limits that happened when the data sheet format was converted from rev E to rev F. The change only applies to the datasheet and there are no changes to the materials or processes used in the manufacture of this part. This is an advisory and… download now
2020_PCN-SIL-0362020-Rev0.pdf Product Group: SIL/Mon Sep 28, 2020/PCN-SIL-0362020-2020-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Commercial Power MOSFET Manufacturing Capacity Expansion DESCRIPTION OF CHANGE: To meet increasing demand for Power MOSFET products, Vishay Siliconix has expanded assembly and test capacity on commercial High Voltage Power MOSFETs in Vishay’s TO247AC package. ASE has been a leading backend manufacturing company since 2003; The Weihai facility has provided world-class total manufacturing services for discrete MOSFETs since 2008. Vishay Siliconix has been a partner with the ASE Weihai facility since 2013. This qualification now adds TO-247AC to other Vishay Siliconix commercial Power MOSFET packages supplied by ASE. The manufacturing process to be used in ASE is similar to that used… download now
2020_PCN-SIL-035-Rev0.pdf Product Group: SIL/Tue Sep 22, 2020/PCN-SIL-035-2020-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Commercial Power MOSFET Manufacturing Capacity Transfer DESCRIPTION OF CHANGE: Vishay Siliconix Division is moving assembly and test location from Vishay Xi’an factory to Advanced Semiconductor Engineering (ASE) plant located in Weihai, China for commercial High Voltage Power MOSFETs in Vishay’s Super TO-247 package. ASE has been a leading backend manufacturing company since 2003; The Weihai facility has provided world-class total manufacturing services for discrete MOSFETs since 2008. Vishay Siliconix has been a partner with the ASE Weihai facility since 2013. This qualification now adds Super TO-247 to other Vishay Siliconix commercial Power MOSFET packages supplied by ASE. The… download now
2020_PCN-SIL-0342020.pdf download now
2020_PCN-SIL-0332020.pdf download now
2020_PCN-SIL-021-2020-Rev0.pdf Product Group: SIL/Fri Oct 30, 2020/PCN-SIL-021-2020-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Resumption of supply for SOT-23 Power MOSFETS at KEC factory. DESCRIPTION OF CHANGE: This PCN is being provided to you as an announcement that we will be resuming the KEC Lamphun (Thailand) factory from 1st Jan 2021. REASON FOR CHANGE: Capacity Resumption. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: There will be no change to electrical performance and footprint of package dimensions. No changes to any datasheets. PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding page. VISHAY BRAND(s): Vishay Siliconix TIME SCHEDULE: Start Shipment Date: Fri Jan 29, 2021 SAMPLE AVAILABILITY: 20th November 2020 PRODUCT IDENTIFICATION: Products manufactured at… download now
2020_PCN-SIL-0182020.pdf Product Group: Vishay Siliconix/ August 11, 2020 / PCN-SIL-018202 0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Subject: Advisory regarding Revision in SQJB40EP Da tasheet Dear Valued Customer: As part of Vishay Siliconix commitment to Quality, we would like to extend to you a courtesy advisory notification of a datasheet revision for the follow ing part number: - There is no change to the materials or processes used in the manufacture of this part. - The changes per this Advisory reflect the additio n of Source-Drain Diode Ratings to specifications table including trr, Qrr, ta, tb, and IRM(REC). We hope you find this Datasheet Update Advisory hel pful. This Advisory is for information only and there is no need for a… download now
2020_PCN-SIL-016-Rev0.pdf download now
2020_PCN-SIL-011-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # Product Group: Vishay Siliconix /April 30 th, 2020 / PCN -SIL -011 2020 Additional Commercial Low Voltage MOSFET Manufacturing & Test Capacity DESCRIPTION OF CHANGE: Vishay is pleased to announce the qualification for manufacturing and test capacity at Amkor Technology, Malaysia for Vishay’s PPAK SO8 products. Amkor Technology is high quality subcontracting partner for Vishay. Amkor Technology is one of the world’s largest providers of semiconductor test and assembly services, and has received international quality systems and environmental compliance certifications TS61949, ISO9001, ISO14001 and OSHAS 18001. CLASSIFICATION OF CHANGE: Manufacturing and Test Capacity… download now
2020_PCN-SIL-010-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # Product Group: Vishay Siliconix /April 15 th, 2020 / PCN -SIL -0102020 Vishay Siliconix Announces Additional Conversion to Copper Bondwire for Commercial Power MOSFETs DESCRIPTION OF CHANGE: Vishay Siliconix announces the qualification for production of part numbers as listed below with copper bond-wire in SC70 package. Manufacturing of these Low Voltage MOSFET SC70 package parts with Copper wire will add to Vishay Siliconix Copper wire product families that have been in production since November 2007. CLASSIFICATION OF CHANGE: Material set conversion REASON FOR CHANGE: Part of continued quality improvement program EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE:… download now
2020_PCN-SIL-009-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # Product Group: Vishay Siliconix /April 14 th, 2020 / PCN-SIL-0092020 Vishay Siliconix Announces Additional Conversion to Copper Bondwire for Commercial Power MOSFETs DESCRIPTION OF CHANGE: Vishay Siliconix announces the qualification for production of part numbers: SI7738DP-T1-E3 & SI7738DP-T1-GE3 copper bond-wire in PPAKSO8 –S package. Manufacturing of these Low Voltage MOSFET PPAKSO8 –S package parts with Copper wire will add to Vishay Siliconix Copper wire product families that have been in production since November 2007. 1) Au to Cu wire. 2) Pad thickening from 2.8um to 5.0um pad. CLASSIFICATION OF CHANGE: Material set conversion REASON FOR CHANGE: Part of… download now
2020_PCN-SIL-002.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # Product Group: Vishay Siliconix /January 13 th, 2020 / PCN - SIL -0022020 Vishay Siliconix Announces Additional Conversion to Copper Bondwire for Commercial Power MOSFETs DESCRIPTION OF CHANGE: Vishay Siliconix announces the qualification for production of part numbers SI3440ADV-T1-GE3, SI3440DV-T1-E3 and SI3440DV-T1-GE3 with copper bond-wire in TSOP6 package. Manufacturing of these Low Voltage MOSFET TSOP6 package parts with Copper wire will add to Vishay Siliconix Copper wire product families that have been in production since November 2007. CLASSIFICATION OF CHANGE: Material set conversion REASON FOR CHANGE: Part of continued quality improvement program EXPECTED… download now
2020_PCN-SF-256-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # SFERNICE / SPECTROL M63 M70 TRIMMERS MODEL Laser m arking DESCRIPTION OF CHANGE: Possibility to use both current tampography stamping and laser marking M63 and M70 trimmer model (Minor change ). For version P & M of M63 model, possibility to change ma rking side . All other products specifications remain unchanged. CLASSIFICATION OF CHANGE: Production REASON FOR CHANGE: Marking rationalization & Improvement of production flow EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: none PROD UCT CATAGORY: Resistor, variable PART NUMBERS/SERIES/FAMILIES AFFECTED: refer to attached PNs list (see Excel file below). VISHAY BRAND(s): SFERNICE SPECTROL MCB TIME SCHEDULE:… download now
2020_PCN-SF-255-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D ’ S L AR G E S T M AN U F A CT U R E R S O F D I S C R E T E S E M I CO N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # SFERNICE POWER RESISTORS D2TO & DTO New Reel Packaging design DESCRIPTION OF CHANGE: In line with our commitment for continuous improvement and procurement safety, Vishay Sfernice is changing the Reel design for the D2TO020, D2TO035, DTO025 & DTO035 packaged in T&R. (See reel pictures in page 2). Reel dimensions remain the same. All products specifications remain unchanged. CLASSIFICATION OF CHANGE: Packaging REASON FOR CHANGE: packaging obsolescence EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: none PRODUCT CATAGORY: Fixed Resistors PART NUMBERS/SERIES/FAMILIES AFFECTED: SERIES D2TO020 D2TO035 DTO025 DTO035 VISHAY BRAND(s): SFERNICE TIME SCHEDULE: Start Shipment… download now
2020_PCN-SF-252-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.v ishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # MCB Industrie POTENTIOMETERS A ctivation of alternate production site for PMR 425 and PMR427 DESCRIPTION OF CHANGE: Activati on of alternate prod uction site (Blatna CZ) for PMR 425 and PMR427 . CLASSIFICATION OF CHANGE: Manufacturing site REAS ON FOR CHANGE: Production flexibility, security of procurement & capacity increase .Mechanical, Electrical and Quality characteristics will remain the same. From the written date, customers will receive parts from either location. No part numbering change. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE : None . PRODUCT CATAGORY: Resistor, variable PART NUMBERS/SERIES/FAMILIES AFFECTED: PMR 425 XXX and PMR427 XXX… download now
2020_PCN-SF-249_Rev0.pdf Page 1 of 2 Product Group: SFERNICE / February 3rd 2020 / PCN -SF -24 9-2020 Rev 0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # SFERNICE POSITION SENSORS 53 4 Series – 10ko hms resistance value range Introduction of a new lubricant DESCRIPTION OF CHANGE: Introduction o f an alternative lubricant for the lubrication of the sliding contact of the 534 - 103 (10kohms ). CLASSIFICATION OF CHANGE : Form Fit Function REASON FOR CHANGE : The current lubricant is obsolete. EXPECTED INFLUENCE ON QUALITY / RELIABILTY / PERFORMANCE : none PRODUCT CATAGORY : Resistor, variable PART NUMBERS / SERIES / FAMILIES AFFECTED : 534 - 103 (10ko hms) resistance range (Standard and custom PNs) VISHAY BRAND(s) : SFERNICE TIME… download now
2020_PCN-OSI-1146-Rev0.pdf Product Change Notification Product Group: Opto Sensors & IRDC 20 -NOV -2020 / PCN OSI -1146 -2020 Rev. 0 TITLE : Change of casting epoxy supplier New supplier has acquired the business from the existing manufacturer. The casting epoxy will be supplied from a new production site after the PCN. There is no change in material formulation or optical properties. Performance of the components will remain unchanged. DESCRIPTION OF CHANGE : Direct Materials (Major) CLASSIFICATION OF CHANGE : Current casting epoxy supplier has sold its business. REASON FOR CHANGE : No change in quality, reliability and performance expected. No change in Vishay datasheets. EXPECTED INFLUENCE ON QUALITY RELIABILITY / PERFORMANCE: Photo Detectors PRODUCT CATEGORY : PART NUMBERS / SERIES / FAMILIES AFFECTED: BPV11F BPV11FS BPV22F BPV22F -AS12 BPV23F BPV23FL BPV23FL -AS12 BPV23FL -ES12Z BPW41N BPW41N -AS12Z VISHAY SEMICONDUCTORS VISHAY BRAND(s) : TIME SCHEDULE: Annotations about time schedule: Start Shipment Date :… download now
2020_PCN-OSI-1145-Rev0.pdf Product Change Notification Product Group: Opto Sensors & IRDC 05-NOV-2020 / PCN OSI-1145-2020 Rev. 0 TITLE: VEML6030- change in coating pattern and die attach epoxy After PCN implementation new IC coating pattern and new die attach epoxy will be used (please see attached ppt for the detai led description of the changes) DESCRIPTION OF CHANGE: Direct Materials (Major) / Wafer/Chip/Pellet Layout /DesignREASON FOR CHANGE : no change in performance and quality EXPECTED INFLUENCE ON QUALITY RELIABILITY / PERFORMANCE: Optical Sensors PRODUCT CATEGORY : PART NUMBERS / SERIES / FAMILIES AFFECTED: VEML6030 VEML6030-GS15 VISHAY SEMICONDUCTORS : TIME SCHEDULE: Annotations about time schedule: Start Shipment Date: 02-FEB-2021 to be defined PRODUCT IDENTIFICATION : Available on request QUALIFICATION DATA : This PCN is considered approved, without further no tification, unless we receive specific customer concerns before: 01-FEB-2021 or as specified by contract. ISSUED BY: PM: Elena Poklonskaya,… download now
2020_PCN-OSI-1123-Rev0.pdf Product Change Notification Product Group:Opto Sensors & IRDC 14-JUL-2020 / PCN OSI-1123-2020 Rev. 0 TITLE: Change of wafer diameter for PIN diodes Due to discontinuation of 4" silicon wafers, 6" waf ers will be used for chip production. There is no change in performance, datasheet or for m factor of the affected components. DESCRIPTION OF CHANGE : Direct Materials (Major) CLASSIFICATION OF CHANGE : 4" silicon wafers are discontinued by the supplier. REASON FOR CHANGE : No change in quality, reliability and performance. EXPECTED INFLUENCE ON QUALITY RELIABILITY / PERFORMANCE: Photo Detectors PRODUCT CATEGORY : PART NUMBERS / SERIES / FAMILIES AFFECTED: TEMD5510FX01 TEMD6010FX01 TEMD6200FX01 TEMD6200FITX01 VISHAY SEMICONDUCTORS VISHAY BRAND(s) : TIME SCHEDULE: Annotations about time schedule: Start Shipment Date: 04-OCT-2020 SAMPLES AVAILABLE BEGINNING : We need samples for evaluation: Yes No If Yes return this form to contact information belo w. date code PRODUCT IDENTIFICATION :… download now
2020_PCN-OSI-1107-2020-Rev0.pdf Product Change Notification Product Group:Opto Sensors & IRDC 02-APR-2020 / PCN OSI-1107-2020 Rev. 0 TITLE: Change of wafer diameter for PIN diodes Due to discontinuation of 4" silicon wafers, 6" waf ers will be used for chip production. There is no change in performance, datasheet or for m factor of the affected components. DESCRIPTION OF CHANGE : Wafer/Chip/Pellet Process/Structure CLASSIFICATION OF CHANGE : 4" silicon wafers are discontinued by the supplier. REASON FOR CHANGE : No change in quality, reliability and performance. EXPECTED INFLUENCE ON QUALITY RELIABILITY / PERFORMANCE: Photo Detectors PRODUCT CATEGORY : PART NUMBERS / SERIES / FAMILIES AFFECTED: K850P K850P-CS12 K851PC-CS12 K851P-CS12 K851PM-CS12 K852P-CS12 S853P S910P TCND5000 TEFD4300 TEFD4300F TEFD4300F-QS21 TEMD1000 TEMD1000-GS15 TEMD1020 TEMD1030 TEMD1040 TEMD5080X01 TEMD7000ITX01 TEMD7000X01 TEMD7100ITX01 TEMD7100X01 VEMD10940F VEMD2000X01 VEMD2000X01H VEMD2003X01 VEMD2020X01 VEMD2020X01F VEMD2020X01H… download now
2020_PCN-OMV-1134-Rev0.pdf Product Change Notification Product Group:Opto Modules & Visibles 09-DEC-2020 / PCN OMV-1134-2020 Rev. 0 TITLE: Standardization of Au wire Diameter Changeover from 25um to 20um Au wire Diameter. DESCRIPTION OF CHANGE : Direct Materials (Major) CLASSIFICATION OF CHANGE : In order to streamline the production and optimize the material supply chain, Vishay introduces a new Standardization of Au wire Diameter. The material is qualified to high Standards. REASON FOR CHANGE : The Quality / Reliability remains unchanged. It is not expected that any differences in technical characteristics or other properties will be observed. Consequently the datasheets remain unchanged. Nevertheless, we recommended to order samples to te st the parts in your application. EXPECTED INFLUENCE ON QUALITY RELIABILITY / PERFORMANCE: IR Receivers PRODUCT CATEGORY : PART NUMBERS / SERIES / FAMILIES AFFECTED: Panhead IR-Receiver VISHAY SEMICONDUCTORS VISHAY BRAND(s) : TIME SCHEDULE: Annotations about time schedule:… download now
2020_PCN-OMV-1121-Rev0.pdf Product Change Notification Product Group:Opto Modules & Visibles 12-JUN-2020 / PCN OMV-1121-2020 Rev. 0 TITLE: Change of Casting Epoxy for Seven Segment Displays Vishay is introducing a change of casting epoxy for leaded, single digit seven segment displays. DESCRIPTION OF CHANGE : Direct Materials (Major) CLASSIFICATION OF CHANGE : The current material supplier has discontinued the manufacturing of the casting epoxy. The new material is produced by anot her well known supplier using the same formula providing the same chemical, physical and optical properties. There is no change in the performance and characteristics of the Displays. REASON FOR CHANGE: Quality, reliability and performance of the devices will not change. There is no change in form fit or function. EXPECTED INFLUENCE ON QUALITY RELIABILITY / PERFORMANCE: Displays PRODUCT CATEGORY : PART NUMBERS / SERIES / FAMILIES AFFECTED: Displays / TDS*11..., TDS*31..., TDS*51..., TDSR07. .., TDSR10..., TDSR13... VISHAY… download now
2020_PCN-OMV-1115-Rev0.pdf Product Change Notification Product Group:Opto Modules & Visibles 29-MAY-2020 / PCN OMV-1115-2020 Rev. 0 TITLE: LH1525A and LH1526A data sheet specification change The IFON specification is being changed from 0.5 mA to 0.9mA on the LH1525A series and LH1526A series products. DESCRIPTION OF CHANGE: Test Process CLASSIFICATION OF CHANGE : Since the die change defined in PCN OMV -1008 -2017 the parameter IFon = 0.5 mA max. cannot be met for the LH1525A and LH152 6A series of products. To resume normal operations on these prod ucts this parameter has been relaxed to 0.9mA. This change is being applied immediately. REASON FOR CHANGE : This change involves no material or process changes . As such there is no influence to the reliability of the product. EXPECTED INFLUENCE ON QUALITY RELIABILITY / PERFORMANCE: Solid State Relays PRODUCT CATEGORY : PART NUMBERS / SERIES / FAMILIES AFFECTED: Coupler / Solid State Relays VISHAY SEMICONDUCTORS VISHAY BRAND(s) : TIME SCHEDULE: Annotations about… download now
2020_PCN-OMV-1114-Rev0.pdf Product Change Notification Product Group:Opto Modules & Visibles 02-APR-2020 / PCN OMV-1114-2020 Rev. 0 TITLE: New die bond pastes for SMD CHIP-LEDs Vishay announces the change to new advanced die bon d pastes for PCB based ChipLEDs. ChipLEDs using horizontal chip stru ctures with two bond pads on top, are changed to a new non-conductive di e bond paste. ChipLEDs using vertical chip structures are changed to a new conductive die bond paste. There a re no changes in form, fit or function. The datasheets remain unchanged. For more details please refer to the att achment: "New_glue_ChipLEDs.pdf" DESCRIPTION OF CHANGE : Bill of Material (Major) CLASSIFICATION OF CHANGE : In order to ensure long term availability and best performance the die bond pastes have to be uprated to more recent materials with better compatibility to REACH requirements, better shear strengths and reli ability. REASON FOR CHANGE : There is no adverse effects on the quality and performance of the product. EXPECTED… download now
2020_PCN-OMV-1106-Rev0.pdf Product Change Notification Product Group: Opto Modules & Visibles 21-JAN-2020 / PCN OMV-1106-2020 Rev. 0 TITLE: Materials Changes for IR Receivers The epoxy material will be changed for Mold, Minimo ld, Panhead, and Heimdall packages. The epoxy of F- and N- products (xxxxF; xxxxN) and products carrying the latest IC generation (Cyllene and Mneme) remains unchanged. A second source photodiode will be introduced for a ll Mold, Minimold, Panhead, Heimdall, Minicast, and TVCast packages. Products that use a customized photodiode (Mold TSS P4xxxXB) will not have a second source photodiode supplier. Please note: It is not possible to specifically order production quantities of parts (after the start shipment date ) with either the former or the new photodiode, as both photodiodes w ill flow into production according to availability.DESCRIPTION OF CHANGE : Bill of Material (Major) CLASSIFICATION OF CHANGE : Offer short lead times in changing market environme nts and avoid line downs at our… download now
2020_PCN-NLR-010-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355- 2143 U.S.A. Phone (610) 644- 1300 Fax (610) 296- 0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT MKT010- 06 Addition of new supplier for PTCEL series DESCRIPTION OF CHANGE: Vishay has the intention to add a second supplier of the ceramic powder specifically for the PTCEL series. CLASSIFICATION OF CHANGE: Major REASON FOR CHANGE: More flexibility, in line with product contingency planning EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: None PRODUCT CATEGORY: Resistors, Non -Linear , P TC PART NUMBERS/SERIES/FAMILIES AFFECTED: PTCEL… VISHAY BRAND(s): Vishay BCc TIME SCHEDULE: Start Manufacturing Date: with second supplier: January 1 st 2021 Start Shipment Date: Possible from February 1 st 2021 Last Time Buy Date: Not applicable Last Time Shipment Date: Not applicable SAMPLE AVAILABILITY: Available upon request PRODUCT… download now
2020_PCN-NLR-009-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355- 2143 U.S.A. Phone (610) 644- 1300 Fax (610) 296- 0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT MKT010- 06 Change of spacer taper material DESCRIPTION OF CHANGE: Vishay has the intention to replace the ondulated carton spacer with an antistatic foam rubber spacer for parts delivered on tape. CLASSIFICATION OF CHANGE: Change of packaging material (M inor ) REASON FOR CHANGE: avoiding dust particles from the carton spacer tape EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: NA PRODUCT CATEGORY: Resistors, Non -Linear , NTC PART NUMBERS/SERIES/FAMILIES AFFECTED: see attachment VISHAY BRAND(s): Vishay BCc TIME SCHEDULE: Start Shipment Date : August 1 st, 2020 Las t Time Buy Date: NA Last Tim e Shipment Date: NA SAMPLE AVAILABILITY: on request PRODUCT IDENTIFICATION: NA QUALIFICATION DATA: NA This P CN is considered approved,… download now
2020_PCN-NLR-005-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355- 2143 U.S.A. Phone (610) 644- 1300 Fax (610) 296- 0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT MKT010- 06 Change in Soldering Process DESCRIPTION OF CHANGE: Vishay has the intention to change from manual soldering to automatic soldering for the custom specific NTC thermistor NTCLE301E4C90251. CLASSIFICATION OF CHANGE: Process Change EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: None PRODUCT CATEGORY: Resistors, Non -Linear , NTC BC PART NUMBERS/SERIES/FAMILIES AFFECTED: NTCLE301E4C90251 VISHAY BRAND(s): Vishay BCc TIME SCHEDULE: Start Shipment Date : Nov 1st 2020 with automatic solder line Estimated Last Time Shipment Date with manual soldering: Oct 30th , 2020 SAMPLE AVAILABILITY: Upon request from automatic solder line PRODUCT IDENTIFICATION: Date code QUALIFICATION DATA: Upon request This PCN is considered approved,… download now
2020_PCN-NLR-004-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355- 2143 U.S.A. Phone (610) 644- 1300 Fax (610) 296- 0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT MKT010- 06 Change in Soldering Process DESCRIPTION OF CHANGE: Vishay has the intention to change from manual soldering to automatic soldering for the NTC thermistor NTCLE 300E3xxxSB series. CLASSIFICATION OF CHANGE: Process Change EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: None PRODUCT CATEGORY: Resistors, Non -Linear , NTC BC PART NUMBERS/SERIES/FAMILIES AFFECTED: NTCLE300 E3xxxSB series VISHAY BRAND(s): Vishay BCc TIME SCHEDULE: Start Shipment Date : Nov 1st 2020 with automatic solder line Estimated Last Time Shipment Date with manual soldering: Oct 30th , 2020 SAMPLE AVAILABILITY: Upon request from automatic solder line PRODUCT IDENTIFICATION: Date code QUALIFICATION DATA: Upon request This PCN is considered approved, without… download now
2020_PCN-NLR-001-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355- 2143 U.S.A. Phone (610) 644- 1300 Fax (610) 296- 0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONEN T MKT010 - 06 Varistor label and marking update DESCRIPTION OF CHANGE: Vishay has the intention to change the safety marking and label info rmation for varistors. CSA logo/filenumber is removed and replaced by equivalent cULus logo . CLASSIFICATION OF CHANGE: Minor ( Marking an d labelling) REASON FOR CHANGE: CSA is no longer maintained. It is replaced by equivalent c-UL -us . (UL file : E332800) EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: None PRODUCT CATEGORY: Resistors, Non -Linear , Varistors PART NUMBERS/SERIES/FAMILIES AFFECTED: VDR* VISHAY BRAND(s): Vishay BC Components TIME SCHEDULE: Start Shipment Date : March 1 st, 2020 Las t Time Buy Date: NA Last Tim e Shipment Date: NA SAMPLE AVAILABILITY: NA PRODUCT IDENTIFICATION:… download now
2020_PCN-MLC-00003-Rev1.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ONE OF THE W OR LD ’S L AR GE S T M AN U F AC TU R E R S OF D IS C R E TE S E M IC ON D U C TOR S AND P AS S IV E C OM P ON E N T Product Group: Vishay Division MLCC / March 11 , 2020 / PCN -MLC -00 003 -2020 Rev 1 Change to P ackaging of VJ Non -Magnetic Series for IR Reflow Soldering 0603 DESCRIPTION OF CHANGE: All VJ Non -Magnetic Series for IR Reflow Soldering 0603 move to plastic (emboss ed) carrier tape . CLASSIFICATION OF CHANGE: Labeling/Packing REASON FOR CHANGE: Streamlining case size 0603 packaging to a common style EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: - Ele ctrical parameters meet the same specification - No influence expected on applications PRODUCT CATEGORY: Capacitors PART NUMBERS/SERIES/FAMILIES AFFECTED: datasheet: www.vishay.com/doc?45227 VJ Non -Magne tic Series for IR Reflow Soldering… download now
2020_PCN-LFPCN_PG0114.pdf To : Littelfuse Sales, Sales Support & Customers Valued Customer From : Littelfuse Product Management – Industrial Business Unit Subject : Obsolescence of Large Body SPXV & SPXI Series (25A & 30A) Document Number : LFPCN_PG0114 Dat e: 09/23/20 20 Lit telfuse would like to inform you about the upcom ing obsolescence planned for the large body dimension SPXV & SPXI series fuses in 25A & 30A . Detailed part numbers that will be obsoleted and their alternative parts are provide d in the Annex Table . Large Body Dimension Parts Sm all body Dimensions XM Parts Reas on for Change SPXV 25&30 SPXI 25&30 SPXV 25&30 XM SPXI 25&30 XM Shift in Customer D emand to smal ler package size (10x85 mm) and supply chain constraint s Going forward / Timef rame Large b ody SPXV / S PXI fuses will be discontin ued from 01/Jan/2021 Annex Table Part Number Planned for the Obsolescence Alternate Part Num ber SPXV025. T SPXV025.TXM SPXV025.L SPXV025.LXM SPXV030.T SPXV030.TXM SPXV030.L SPXV030.LXM SPXV025.TXS No… download now
2020_PCN-LFPCN-41374.pdf 8755 W. Higgins Road Suite 500 Chicago, IL 60631 www.littelfuse.com Sep 9, 2020 Re: LFPCN 41374 Obsolete SIDACTor T10A and T10B series for Thyristor Protection for Telecommunications Applications To Our Valued Customers , Littelfuse would like to notify you of our decision to obsolete T10A and T10B series of SIDACTor product s due to weak end market demand . Please refer the attached documentation for change details and the affected parts are shown in a separate Excel sprea dsheet . Recommended replacement parts can also be found in the Excel , these are functionally similar but not in identical packages . Last Time Buy: Dec 31, 2020 Last Time Shipment: 31 Mar, 2021 This notification is for your information and acknowledgement. If you require more information, pls contact Littelfuse® within 90 days of the notification date. If you have any additional questions or concerns, please contact your Regional Sales Manager or Product Team below for further assistance. We highly value your… download now
2020_PCN-LFPCN-41373.pdf Product Change Notification LFPCN#: 41373 Issue Date: August 26th, 20 20 By: Amy Chu Global Product Manager Achu2@littelfuse.com Tel: +86 21 33357268 Subject: EOL of LowRho Strap Product Line As part of the ongoing efforts to rationalize our product offering, we are planning to end of life (EOL) LowRho Strap Product Line by end of 2020. The affected products are shown in below table and the last-buy order could be accepted by October 30 th, 2020. We will finish the production for the last-buy order and ship out the goods by December 30 th, 2020. If you would like to have more information, please contact Littelfuse local sales representative. The Product Affected: Part Number Part Description RF0980-000 MXP190-Y02-2 RF0990-000 MXP190DK-Y03-2 RF1145-000 MXP190DK-Y05-2 RF1758-000 PSR-27561 RF1781-000 MXP190DKII-Y09-2 RF1827-000 MXP190-Y10-2 RF1869-000 PSR-27660 RF1913-000 MXP190BBLK RF2108-000 MXP190BBLL RF2135-000 MXP180K RF2136-000 MXP190 RF2137-000 MXP190B RF2248-000 MXP270ZLL… download now
2020_PCN-LFPCN-41371.pdf Product Change Notification LFPCN#: 41371 Issue Date: August 24 , 20 20 By: Amy Chu Global Product Manager Achu2@littelfuse.com Type of Notification: Coating material change for LVR075~LVR200 Series Products Description of Change : China National Standard GB30981-2014 (Limit of Harmful Substances of Industrial Protective Coatings) was upgraded to the new version GB30981-2020 with effective date of December 1 st, 2020. With the new requirement for the total content of toluene and xylene in GB30981-2020, we have to stop using green silicone coating material for LVR075~LVR200 series products production from December 1 st, 2020 since the Xylene content in the green coating material is higher than the limit. The last-buy order for the green-coating LVR075~LVR200 series products can be accepted by October 30 th, so we can finish the last-buy production by November 30 th, 2020. Then we will use yellow epoxy coating to produce LVR075~LVR200 series products with the same form factor and… download now
2020_PCN-LFPCN-41369.pdf P a g e 1 | 3 LFPCN# 41369 July 9th, 2020 To: Valued customers From: Littelfuse Product Management Subject: Reel Change Notification for Japan made PolySwitch® mini SMD C PPTC This is to inform that Littelfuse is going to make a change on packing reel for Japan made PolySwitch® mini SMD C PP TC. Please kindly refer to Page 2 for a side by side comparison between current reel and new reel and page 3 for affected part numbers. This change will be effective from Oct 1 st, 2020 , customer would expect to receive the parts with new reel after Oct 1 st 2020 once stock depl eted. Should you have any query about this change, please contact your local Littelfuse sales office or Littelfuse authorized distributor. Best regards, Stephen Li Global Product Manager Littelfuse Shanghai Ltd. Sli2@Littelfuse.com P a g e 2 | 3 Comparison Between New Reel and Current Reel: Item Current Reel N ew Reel Differen ce Size JEITA standard reel （ EIAJ RRM 08 B series ） O uter diameter dimension : 180 ＋ 0/ - 1.5mm… download now
2020_PCN-LFPCN-41327.pdf Li ttel fuse, Inc. 8755 West Hi ggi ns Road, Sui te 500 Chi cago, IL 60631 USA (773) 628 -1000 September 4th, 20 20 RE: LFPCN 4132 7 - Obsolete T VS ST D Part -numbers without suffix A of Vbr range +/-10% To: Our Valued Customers Littelfuse would like to notify you of our decision to obsolete the TVS STD part -numbers of Vbr ± 10%, to be replace d by corresponding part -numbers of Vbr ± 5% . The replacement Vbr ± 5% part numbers have better/tightened tolerances and are used popularly worldwide . Please refer to below for the affected series and see the attached documentation for change details and affected part -numbers with replacement proposed . Affected Series SMAJ P4 SMA SM BJ P6 SMB 1KSMB SM CJ 1.5SMC SM DJ 5.0 SM DJ P4KE P6KE SA 1.5KE LCE 5KP 15KPA 20KPA 30KPA Key dates: Last time buy: Oct 16th, 20 20 Last time shipment: Dec 16th, 2020 This notification is for your information and acknowledgement. If you require more information, pls contact Littelfuse® within 30 days of the… download now
2020_PCN-FC-001_Rev0.pdf Replacement of Tampo print Marking via Laser Print Marking DESCRIPTION OF CHANGE: Vishay Film Capacitors is announcing that we stop to use tampo print and finish to use of white ink for marking of below listed MKP1840 film capacitors . The actually used tampo print procedure will be replaced by marking via Laser . The marking text will be exact the same as usual. CLASSIFICATION OF CHANGE : Change of marking procedure REASON FOR CHANGE: Replace old Tampo - Print System via new Laser - Print System EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: None PRODUCT CATEGORY: Film Capacitors PART NUMBERS/SERIES/FAMILIES AFFECTED: MKP18405681251 MKP18406204051 MKP18406100851 MKP18405800851 VISHAY BRAND(s): Roederstein TIME SCHEDULE: Start Shipment date: May 1st 2020 Last Time Buy Date: n/a Last Time Shipment Date: n/a SAMPLE AVAILABILITY : yes PRODUCT IDENTIFICATION: by date code QUALIFICATION DATA: n/a ISSUED BY: Peter Sultanow ; email: peter.sultanow@vishay.com Tel.: + 49 (0)871 86 -2516… download now
2020_PCN-ESW490-35.pdf Aug 1 4 th, 2 020 PCN # ESW490 -3 5 – Samsung SDI EMC EOL and Alternative EMC Replacement for IXYS Germany Discrete Packages To our valued customers, Littelfuse would like to notify you that we will replace Epoxy Molding Compound (EMC) material for various IXYS Germany Discrete package s which currently are using Samsung SDI EMC due to their EOL as communicated in previous advanced notice. P ackage types includes: ISOPLUS i4-PAK , ISO 247, ISOPLUS247, ISOPLUS220, ISOPLUS264, TO-220F P, TO -252, TO- 252HV, TO -264 . All affected IXYS Germany discrete products have been fully qualified in accordance with established performance and reliability criteria using alternative EMC . The attached pages summarized the qualification results. Full qualification data and/or samples will be available upon request. P ls refer to attached product list in the last pages for detail affected product coverage. Form, fit, function changes: No Fit/Form /Function change with alternative EMC . UL file update… download now
2020_PCN-ESU270-54.pdf Dec 25 th, 20 20 RE: PCN # ESU270 -54 – TVS Diode Array Devices EOL To our valued customers, Littelfuse would like to notify you of the discontinuance of the following TVS Diode Array (SPA® Diodes) products in the “Affected Part Number” column due to Supply Chain optimization. Effective date: Dec 25 th, 20 20 Last time buy date : Mar 25 th, 20 21 or sooner Final product shipment date: Jun 25 th, 202 1 Littelfuse recognizes and respects the need to allow time for our customers to transition existing designs, and we are committed to assist in the process. Part Numbers Affected: Affected part number Replacement SPHV12 -01KTG SPHV12 -01 ET G SPHV12 -01KTG -C SPHV12 -01 ET G-C SPHV15 -01KTG SPHV15 -01 ETG SPHV15 -01KTG -C SPHV15 -01 ETG -C SPHV24 -01KTG SPHV24 -01 ETG SPHV36 -01KTG SPHV36 -01 ETG SPHV36 -01KTG -C SPHV36 -01 ETG -C SP3022 -01WTG SP3522 -01UTG SP1255 -01UTG SP1004 -04VTG This notification is for your information and acknowledgement. If you have any other questions or… download now
2020_PCN-ESTA-001-Rev0.pdf Vishay Europe Sales GmbH Hofmark-Aich-Str. 36, D-84030 Landshut, Germany, Ph one +49 (0) 871 86 0 Fax +49 (0) 871 86 2512 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRET E SEMICONDUCTORS AND PASSIVE COMPONENTS Change of Power Factor Controller PFC6N and PFC12N DESCRIPTION OF CHANGE: In line with our ongoing efforts in improving our products we intend to replace our current Power Fact or Controllers ESTAmat PFC6N and PFC12N by a new model . With this change we will introduce the new generation ESTAmat PFC6-V3 and PFC12-V3 based on latest developments in micro-electronics. CLASSIFICATION OF CHANGE: Change / Upgrade in design and software. REASON FOR CHANGE: Continuous development and state of the art hardwar e modification. EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMAN CE: Optimized performance. PRODUCT CATEGORY: Microprocessor-controlled Power Factor Correction C ontrol devices PART NUMBERS/SERIES/FAMILIES AFFECTED: Part number affected to PFC series:… download now
2020_PCN-DR-00018-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Coating Color Change of FA, ALSR , ALVR, MRB, MRA MRP and MRS Wire Wound Resistors DESCRIPTION OF CHANGE: Product coating color will change from brown to black CLASSIFICATION OF CHANGE: Coating color change REASON FOR CHANGE: Vishay is streamlining its manufacturing process EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: There will be no effect on quality, reliability or performance PRODUCT CATAGORY: Resistors Discrete PART NUMBERS/SERIES/FAMILIES AFFECTED: All the part numbers associated with the below products FA: https://www.vishay.com/docs/31804/fa.pdf ALSR & ALVR : https://www.vishay.com/docs/31800/alsralvr.pdf MRB: https://www.vishay.com/docs /31802/mrb.pdf MRA:… download now
2020_PCN-DR-00009-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Procedure # WSC2515 / WSN2515 0.5% < 50 ohm Extended precision resistance range in Juarez, Mexico DESCRIPTION OF CHANGE: WSC2515 / WSN2515 1% and 0.5% tolerance is currently being produced in Juarez Mexico, but has been limited for 0.5% tolerance to >= 50 ohms. The < 50 ohm resistance range uses a larger diameter wire that will be less sensitive to calibration as compared to the products that are currently in production for the Juarez Mexico location. CLASSIFICATION OF CHANGE: Assembly Site REASON FOR CHANGE: This change notice is to announce the extension of the 0.5% resistance range to < 50 ohms, which will eliminate product transfer between manufacturing locations for end of line completion improving product quality and … download now
2020_PCN-DR-00008-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # CPF - Metal Film Resistors, Axial, Industrial Power, Precision, Flameproof , Data Sheet Update/ Change DESCRIPTION OF CHANGE: Update Datasheet on Low Ohmic Values (below 0.2 Ohm) CLASSIFICATION OF CHANGE: Form, Fit, Function REASON FOR CHANGE: Extend TCR on Low Ohmic Values (below 0.2 Ohm) to 300 PPM (previously listed at 200 PPM) . EXPECTED INFLUENCE ON QUALITY/ RELIABILITY /PERFORMANCE: Low Ohmic Values (below 0.2 Ohm) will be limited to ±300 PPM/°C (characteristic code “M”) . PRODUCT CATEGORY : Resistors, Discrete PART NUMBERS/SERIES/FAMILIES AFFECTED: CPF - Metal Film Resistors, Axial, Industrial Power, Precision, Flameproof parts below 0.2 Ohm VISHAY BRAND(s):… download now
2020_PCN-DR-00007-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Procedure # CSC ‐ Thick Film Resistor Networks, Single‐In‐Line, Conformal Coated SIP, Manufacturing Location Change DESCRIPTION OF CHANGE: Change in manufacturing location from Asia to Mexico. Product coating color will change from black to gold. CLASSIFICATION OF CHANGE: Assembly site / Form, Fit, Function REASON FOR CHANGE: Change COO from Asia to Mexico. EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: There will be no effect on quality, reliability or performance. PRODUCT CATEGORY: Resistors, Discrete PART NUMBERS/SERIES/FAMILIES AFFECTED: CSC‐Thick Film Resistor Networks, Single‐In‐Line, Conformal Coated SIP VISHAY BRAND(s): Vishay Dale TIME SCHEDULE: … download now
2020_PCN-DR-00005-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # WSL & WSL-18 DESCRIPTION OF CHANGE: WSL and WSL-18 (High Power) Short Time Overload (STOL) Rating will be removed from the datasheet. The STOL rating will still be available via a link to the online pulse capability / STOL calculator for surface mount Power Metal Strip® ( https://www.vishay.com/resistors/power-metal-strip-calculator/ ). The calculator provides greater functionality such as temperature derating, customized reporting, and others, which can’t be listed on the datasheet. CLASSIFICATION OF CHANGE: Form, Fit, Function REASON FOR CHANGE: The construction of the WSL & WSL-18 has not changed and so the Form, Fit, and Function are not affected, but are best… download now
2020_PCN-DR-00003-2020_Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Procedure # WSL0603/WSL0603-18/WSLP0603 DESCRIPTION OF CHANGE: WSLx0603 product termination will change from a copper clad technology to a welded copper technology. This change will conform the 0603 size to the other WSLx sizes which currently use a welded copper terminal. This change will slightly effect the TCR for 10mΩ to 49mΩ values and height dimension for all values which will be 0.016”±0.005” starting with date code 2016. Previous dimension was 0.013”±0.005” CLASSIFICATION OF CHANGE: Product Structure REASON FOR CHANGE: The construction of the WSLx0603 terminal bonding to the resistance element will be changed from a copper clad to a welded copper terminal. This allows for overall better performance and utilization of internal… download now
2020_PCN-DI-00486-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F AC T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O NE N T Procedure # IHLP4040DZEBR56M01 / IHLP4040DZERR56M01 IHLP4040DZERR56MA1 / IHLP4040DZRZR56ML1 data sheet correction DESCRIPTION OF CHANGE: The DCR nominal and DCR maximum is changing on the 0.56µH inductance value to reflect the corrected testing results. The correction is from 1.70 to 1.80mOhms typical, and from 1.80 to 1.95mOhms maximum. CLASSIFICATION OF CHANGE: Assembly Process/Structure REASON FOR CHANGE: Correct the data sheets. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N/A PRODUCT CATAGORY: Inductors PART NUMBERS/SERIES/FAMILIES AFFECTED: IHLP4040DZEBR56M01, IHLP4040DZERR56M01, IHLP4040DZERR56MA1, IHLP4040DZRZR56ML1 VISHAY BRAND(s): Vishay Dale TIME SCHEDULE: Start… download now
2020_PCN-DI-00485-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F AC T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O NE N T Procedure # Tolerance change on terminal for IHSM-5832 DESCRIPTION OF CHANGE: The terminal width tolerance on the IHSM-5832 series is changing from 0.217 ± 0.005 [5.51 ± 0.13] to 0.217 ± 0.01 [5.51 ± 0.254]. CLASSIFICATION OF CHANGE: Assembly Process/Structure REASON FOR CHANGE: This change it to correct the data sheet only. There will be no change to the part that we are currently manufacturing. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N/A PRODUCT CATAGORY: Inductors PART NUMBERS/SERIES/FAMILIES AFFECTED: IHSM5832* VISHAY BRAND(s): Vishay Dale TIME SCHEDULE: Start Shipment Date: Immediately Last Time Buy Date: NA Last Time Shipment Date: NA SAMPLE AVAILABILITY: N/A… download now
2020_PCN-DD-021-Rev0.pdf Product Group: Diodes Division / November 13 , 2020 / PCN -DD -021 -20 20 Rev 0 W afer source of Switching G eneral Purpose Glass Diodes DESCRIPTION OF CHANGE: Vishay is introducing an additional external wafer source for Switching General Purpose Diodes in Mini/Quadro/Micro -MELF and DO -35 Glass Package s. As a result of that and accordingly to our policy, Vishay will stop the supply of the Part Numbers mentioned in this announcement to automotive markets/applications accordingly . CLASSIFICATION OF CHANGE: Wafer/Chip/Pellet Site REASON FOR CHANGE: Qualification of e xternal wafer source EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: W ithdraw of AEC - Q101 qualification status . No changes on electrical characteristics and performance . PRODUCT CATEGORY: Diodes PART NUMBERS/SERIES/FAMILIES AFFECTED: Involved part numbers are listed below VISHAY BRAND: Vishay Semiconductors TIME SCHEDULE: For automotive applications : Last Time Buy Date: May 13 , 2021 Last Time Shipment Date… download now
2020_PCN-DD-019-Rev0.pdf Product Group : Diodes Division / October 2 8, 2020 / PCN -DD -019 -2020 Rev. 0 1/5 Additional TVS Wafer Source for Commercial Grade Surface Mount TRANS ZORB ® TVS Product s DESCRIPTION OF CHANGE : In addition to the existing in -house TVS wafer source, Vishay Diodes Division is introducing an additional outsourced wafer from a supplier in Taiwan for commercial grade bi-directional TRANS ZORB ® TVS products in SMA, SMB and SMC packages . There w ill be no change in form, fit and function o f the final products. CLASSIFICATION OF CHANGE: Wafer site REASON FOR CHANGE: Capacity expansion EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: No changes in quality and reliability performance . PRODUCT CATEGORY: TRANS ZORB ® TVS PART NUMBERS/ SERIES /FAMILIES AFFECTED: Involved part numbers are listed in below table . P4SMA6.8CA-E3/5A P4SMA16CA-E3/5A P4SMA39CA-E3/5A P4SMA91CA-E3/5A P4SMA200CA-E3/5A SMA5J9.0CA-E3/5A P4SMA6.8CA-E3/61 P4SMA16CA-E3/61 P4SMA39CA-E3/61 P4SMA91CA-E3/61… download now
2020_PCN-DD-018-Rev0.pdf 1/2 Product Group : Diodes Division / October 12, 20 20 / PCN -DD -018-20 20 Rev. 0 Manufacturing Location Change for Automotive G rade of GF1 (DO -214BA) P ackage DESCRIPTION OF CHANGE : Vishay Diodes Division is transfer ring the assembly & final test of automotive grade products in GF1 (DO -214BA) package from Vishay Taipei , Taiwan factory to Vishay Xi’an , China factory . All material s & process are kept the same as in the current production in Taipei . There is no change in form, fit and function of the device s in customer application s, except label size as explained in the table below. Item Before After Assembly Site Vishay Taipei, Taiwan Vishay Xi'an , China Label Size 2D: 7.6 x 3.8 cm 1D: 4.5 x 2.5 cm 2D: 8.0 x 4.0 cm 1D: 6.0 x 3.0 cm 2D Label 1D Label CLASSIFICATION OF CHANGE: Assembly Site REASON FOR CHANGE: Production line consolidation EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: No change in quality, reliability and performance PRODUCT CATEGORY: Rectifier… download now
2020_PCN-DD-016-Rev0.pdf Solder Wire C hange DESCRIPTION OF CHANGE: Vishay Semicondutors announces the solder wire change from Pb90In5Ag5 to Pb92.5Sn5Ag2.5 on TO -263 and TO -262 Part Numbers. CLASSIFICATION OF CHANGE: Assembly Process/Structure REASON FOR CHANGE: Material consolidation EXPECTED INFLUENCE ON QU ALITY/RELIABILITY/PERFORMANCE: There will be no effect on quality, reliability or electrical performance. PRODUCT CATEGORY: Diodes PART NUMBERS/SERIES/FAMILIES AFFECTED: PACKAGE FAMILY PRODUCT TO -263 FRED VS -15ETH03SHM3 TO -263 FRED VS -15ETH03STRLHM3 TO -263 FRED VS -15ETH03STRRHM3 TO -262 FRED VS -20CTH03 -1HM3 TO -263 FRED VS -20CTH03SHM3 TO -263 FRED VS -20CTH03STRLHM3 TO -263 FRED VS -20CTH03STRRHM3 TO -263 FRED VS -30CTH02SHM3 TO -263 FRED VS -30CTH02STRLHM3 TO -263 FRED VS -30CTH02STRRHM3 TO -262 FRED VS -8ETH03 -1HM3 TO -263 FRED VS -8ETH03SHM3 TO -263 FRED VS -8ETH03STRLHM3 TO -263 FRED VS -8ETH03STRRHM3 TO -262 FRED VS -8ETH06 -1HM3 TO -263 FRED VS -8ETH06SHM3 TO -263 FRED VS -8ETH06STRLHM3… download now
2020_PCN-DD-015-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Alternate molding compound for MB and MT plastic case DESCRIPTION OF CHANGE: Alternate molding com pound for plastic cases for MB and MT bridge package. Products will be manufactured using either ACHMELITE J -1095 (existing) or EME5961 (new). CLASSIFICATION OF CHANGE: Molding/Coating REASON FOR CHANGE: Bill of materials harmonization . EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: No change in form, fit, function of the device in customer’s application. PRODUCT CATAGORY: Diodes PART NUMBERS/SERIES/FAMILIES AFFECTED: MB VS -26MB05A VS -36MB05A VS -61 -0027 VS -82 -0325 VS -82 -2595 VS -26MB06 VS -36MB100A VS -61 -0044 VS -82 -0326 VS -IA66 VS -26MB100A VS -36MB10A VS -61… download now
2020_PCN-DD-014-Rev0.pdf Product Group: Diodes Division / August 7, 20 20 / PCN -DD -014 -2020 Rev. 0 MicroSMF PLZ series bonding wire change DESCRIPTION OF CHANGE ： Vishay Diodes Division will change PLZ series products’ bonding wire from Cu wire to Pd coated -Cu wire in MicroSMF (DO -219AC) package . Qualification test has been confirmed to meet and pas s all specifications for automotive grade. There will be no change in form, fit or function of final products. CLASSIFICATION OF CHANGE ： Assembly Process/Structure REASON FOR CHANGE ： Wire bonding technology upgrade EXPEC TE D INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE ： There will be no effect on qualit y, reliability or electrical performance. PRODUCT CATEGORY : Diodes PART NUMBERS/SERIES/FAMILIES AFFECTED ： Involved part numbers are listed in below table 1 and table 2 Table 1: MicroSMF packaged PLZ Series P/N with suffix “-G3” , industrial grade, (no part number change) PLZ10A -G3/H PLZ20D -G3/H PLZ30D -G3/H PLZ4V7A -G3/H PLZ10B -G3/H PLZ22A -G3/H… download now
2020_PCN-DD-012-Rev0.pdf 1/2 Product Group: Diodes Division / Jun e 24 , 20 20 / PCN -DD -012 -2020 Rev. 0 Ma nufacturing Location Change for TO -3P Package DESCRIPTION OF CHANGE : Vishay Diodes Division is transferring the assembly & final test of all products in TO -3P package from Vishay Tianjin factory to Vishay Xi’an factory . In addition to the location change , all Schottky products will change solder paste composition from 88%Pb/2% Ag/10%Sn to 92.5%Pb/2.5%Ag/5%Sn . All other assembly raw material, process flows and controls used in Vishay Xi’an factory are the sa me as those used in current Vishay Tianjin factory production . There is no change in POD spec. , form, fit and function of the device in customer application . All involved change s are summarized in below table : Item Before After Assembly Site Vishay Tianjin Vishay Xi'an Solder paste composition (For Schottky products in TO -3P package ) 88%Pb/2%Ag/10%Sn 92.5%Pb/2.5%Ag/5%Sn Label Inner b ox 21.9 inch * 6.4 inch * 3.1 inch 21.1 inch * 9.4… download now
2020_PCN-DD-011-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T P roduct O bsolescence DESCRIPTION OF CHANGE: Vishay Semiconductor s announces the discontinuation of some power module part numbers . CLASSIFICATION OF CHANGE: Product Obsolescence REASON FOR CHANGE: Discontinued supply of Mosfet - IGBT dice EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N/A PRODUCT CAT EGORY: Modules PART NUMBERS/SERIES/FAMILIES AFFECTED: Obsolete Part Number Replacement Part Number VS -GB75NA60UF Contact Factory VS -FB190SA10 VS -FC420SA10 VS -FC220SA20 VS -FC270SA20 VS -FC80NA20 NA VS -VSHPS1445 NA VISHAY BRAND(s): Vishay Semiconductors TIME SCHEDULE: Last Time Buy Date: October 20 , 20 20 Last Time Shipment Date: April 30 , 202 1 Last Time Return… download now
2020_PCN-DD-009-Rev0.pdf Product Group: Diodes Division / June 15, 2020 / PCN -DD -009 -2020 Rev. 0 1/2 8 inch Wafer Conversion for 100V TMBS and A ssembly S ite C hange for TO -26 3 package DESCRIPTION OF CHANGE : Vishay Diodes Division is converting the wafer source of 100V TMBS in TO -263 packaged products from the existing in -house 6inch wafer to new 8inch wafer from an outsourced foundry in Taiwan. Additionally, the assembly location of TMBS ® (Trench MOS Barrier Schottky) rectifiers in TO -263 package is moving from Vishay Tianjin factory, China to an existing subcontractor in Shandong, China. This existing subcontractor was already introduced before for TMBS products in TO -263 package through PCN -DD -023 -2019 . Qualification test has been confirmed to meet and pass all specifications for commercial grade. The datasheet spec. including package outline dimensions remain unchanged and the finished good appearance and reel packing variance are shown in below table . There will be no other change in… download now
2020_PCN-DD-008-Rev0.pdf 1/2 Product Group: Diodes Division / April 28 , 20 20 / PCN -DD -008 -2020 Rev 0 6 inch Wafer Introduction for Non -automotive Grade TVS DESCRIPTION OF CHANGE : Vishay Diodes Division is introducing an additional 6 inch wafer capacity for non -automotive grade TVS in SMA , SMP and SMPC packages . Also with the notification, bare die/wafer of the same wafer technology will be converted to 6 inch . There will be no change in form, fit and function of final products. CLASSIFICATION OF CHANGE: Wafer diameter REASON FOR CHANGE: Capacity expansion EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: No changes in quality and reliability performance PRODUCT CATEGORY: TransZorb ® TVS ; Zener and Bare Die/Wafer PART NUMBERS/SERIES/FAMILIES AFFECTED: Involved part numbers are listed below . 1) Packaged part numbers: P/N PKG code P/N PKG code P/N PKG code P6KSMA13A -01E3 /61 SMA6J12A -M3 /61, /5A SMP13A -M3 /84A, /85A P6KSMA13A -01M3 /61 SMA6J13A -E3 /61, /5A SMP14A -M3 /84A, /85A PTV10B -M3… download now
2020_PCN-DD-006-Rev0.pdf Product Group: Diodes Division / March 3 1 , 2020 / PCN - DD - 006 - 2020 Rev. 0 1 / 2 Additional Schottky Wafer Foundry for Commercial Grade SMX & SMP Rectifiers and Die Thickness Consolidation D ESCRIPTION OF CHANGE : In addition to the existing in - house Schottky wafer source, Vishay Diodes Division is introducing a s ubcontractor Schottky foundry in Tianjin, China for commercial grade SM A, SMB, SMC & SMP 20 V ~40V Schottky rectifiers. Also taking advantage of this notifi cation , the SMA & SMC Schottky die thickness is changed and consolidat ed from 14mil to 12mil. There w ill be no change in form, fit and function o n all involved products. CLASSIFICATION OF CHANGE: Wafer/Chip/Pellet s ite, Die thickness REASON FOR CHANGE: Capacity expansion / Process consolidation EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: No changes in quality and reliability performance . PRODUCT CATEGORY: Rectifiers PART NUMBERS/ SERIES /FAMILIES AFFECTED: Involved part numbers are listed in… download now
2020_PCN-DD-005-Rev0.pdf Die Passivation change DESCRIPTION OF CHANGE: Vishay Semicondu ctors announces the change of the die passivation material from one single layer (S ilicone E lastomer ) to two layers (Polyimide plus Silicone Elastomer ) on below Part Numbers. Other Fab processes, total passivation thickness and deposition method will remain unchanged . CLASSIFICATION OF CHANGE: Wafer /Chip/Pellet Process/Structure REASON FOR CHANGE: Obsolescence of the current die passivation material from supplier . EXPECTED INFLUENCE ON QU ALITY/RELIABILITY/PERFORMANCE: There will be no effect on quality, reliability or electrical performance. PRODUCT CATEGORY: Diodes, Modules PART NUMBERS/SERIES/FAMILIES AFFECTED: Part Number Part Number Part Number Part Number VS -305U250P4 VS -S1020 VS -S1790 VS -SD300C30C VS -305UA250P4 VS -S1039 VS -S1844 VS -SD300C32C VS -305UR250P4 VS -S1044 VS -S1845 VS -SD300N28PC VS -305URA250P4 VS -S1052 VS -S1859 VS -SD300N32PC VS -307UA250P4 VS -S1062 VS -S623B VS -SD300R25PC VS… download now
2020_PCN-DD-004-Rev0.pdf Improvement of FRED Die Passivation and Mold Compound Change DESCRIPTION OF CHANGE: Vishay Semicondutors announces the introduction of an additional Silicon Nitride layer in passivation, on below FRED part numbers. Part Numbers in TO -247 package will also change the Mold Compound from SG -8200DTV to EME -E-500HAC . The new mold compound is halogen free as the current one. CLASSIFICATION OF CHANGE: Wafer /Chip/Pellet Process/Structure Molding REASON FOR CHANGE: Passivation: Continuous improvement Mold Compound: d iscontinuation in the supply of the actual Mold Compound . EXPECTED INFLUENCE ON QU ALITY/RELIABILITY/PERFORMANCE: There will be no effect on quality, reliability or electrical performance. PRODUCT CATEGORY: Diodes , Die & W afers PART NUMBERS/SERIES/FAMILIES AFFECTED: Package Family Part Number Mold Compound change Die on film FREDS VS -4FD081H06A6FC Die on film FREDS VS -4FD081H06A6FCS1 Die on film FREDS VS -4FD121H07A6FC Die on film FREDS VS -4FD121U07A6FC Die on film FREDS… download now
2020_PCN-DD-003-2020_Rev0.pdf Die Passivation change DESCRIPTION OF CHANGE: Vishay Semicondu ctors announces the change of the die passivation material from one single layer (S ilicone E lastomer ) to two layers (Polyimide plus Silicone Elastomer ) on below Part Numbers. Other Fab pr ocesses, total passivation thickness and deposition method will remain unchanged . CLASSIFICATION OF CHANGE: Wafer /Chip/Pellet Process/Structure REASON FOR CHANGE: Obsolescence of the current die passivation material from supplier . EXPECTED INFLU ENCE ON QU ALITY/RELIABILITY/PERFORMANCE: There will be no effect on quality, reliability or electrical performance. PRODUCT CATEGORY: Diodes, Thyristors , Modules PART NUMBERS/SERIES/FAMILIES AFFECTED: Part Number Part Number Part Number Part Number VS -301U160 VS -S1077 VS -SD400C20C VS -ST330S16P1 VS -301U200 VS -S1078 VS -SD400C24C VS -ST330S16P1PBF VS -301U250 VS -S1080 VS -SD400N16PC VS -ST650C20L1 VS -301UA200 VS -S1082 VS -SD400N20PC VS -ST650C22L0 VS -301UR160 VS -S1090 VS… download now
2020_PCN-DBR-0002-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D ’ S L AR G E S T M AN U F A CT U R E R S O F D I S C R E T E S E M I CO N D U C T O R S A N D P A S S I V E C O M P O N E N T Discontinuation of Resistance Value Marking for TNP V e3 series, High Voltage Thin Film Flat Chip Resisto rs, in case sizes 1206 and 1210 DESCRIPTION OF CHANGE: TNPV e3 series will no longer receive resistance va lue marking. CLASSIFICATION OF CHANGE: Marking REASON FOR CHANGE: Optimization of production process EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANC E: None PRODUCT CATEGORY: Resistors PART NUMBERS/SERIES/FAMILIES AFFECTED: TNPV1206xxxxxxxxxx TNPV1210xxxxxxxxxx REPLACEMENTS: not applicable, products remain available under the same part number. VISHAY BRAND(s): Vishay Draloric. TIME SCHEDULE Last Time Buy Date: not applicable Last Time Shipment Date: not applicable Start… download now
2020_PCN-DBR-00006-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com O N E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S IV E C O M P O N E N T Introduction of Intermediate Cu/Ni-Termination-Laye rs for Thin Film MELF Resistors PMM0207, OMM0207 DESCRIPTION OF CHANGE: Termination design of PMM0207 and OMM0207 will be changed from layer sequence “NiP / Matte Tin” to “NiP / Cu / Ni / Matte Tin”. CLASSIFICATION OF CHANGE: Termination Design REASON FOR CHANGE: The termination design for Draloric / Beyschlag ME LF resistors will be harmonized by using the same layer sequence for PMM 0207 and OMM0207as for MMB 0207: NiP / Cu / Ni / Matte Tin. Intermediate layers of Cu and Ni im prove the solder joint robustness of SMM0207 agains t thermal cycling. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANC E: Improvement of solder… download now
2020_PCN-DBR-00005-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com O N E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S AN D P A S S IV E C O M P O N E N T Introduction of Intermediate Cu/Ni-Termination-Laye rs for Carbon Film MELF Resistors LCM0207 DESCRIPTION OF CHANGE: Termination design of LCM0207 will be changed from layer sequence “NiP / Matte Tin” to “NiP / Cu / Ni / Matte Tin”. CLASSIFICATION OF CHANGE: Termination Design REASON FOR CHANGE: The termination design for Draloric / Beyschlag ME LF resistors will be harmonized by using the same layer sequence for LCM 0207 as for MMB 0207: NiP / Cu / Ni / Matte Tin. Intermediate layers of Cu and Ni improve the solder joint robustness of LCM0207 against thermal cyclin g. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANC E: Improvement of solder joint robustness against thermal… download now
2020_PCN-DBR-00004-Rev0.pdf Vishay \bntertechnology, \bnc. Corporate Headquarters 63 Linc\bln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com O N E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D \b S C R E T E S E M \b C O N D U C T O R S AN D P A S S \bV E C O M P O N E N T \bntroduction of \bntermediate Cu/Ni-Termination-Layers for Thin Film MELF Resistors SMM0207 DESCR\bPT\bON OF CHANGE: Terminati\bn design \bf SMM0207 will be changed fr\bm layer sequence “NiP / Matte Tin” t\b “NiP / Cu / Ni / Matte Tin”. CLASS\bF\bCAT\bON OF CHANGE: Terminati\bn Design REASON FOR CHANGE: The terminati\bn design f\br Dral\bric / Beyschlag MELF resist\brs will be harm\bnized by using the same layer sequence f\br SMM0207 as f\br MMB 0207: NiP / Cu / Ni / Matte Tin. Intermediate layers \bf Cu and Ni impr\bve the s\blder j\bint r\bbustness \bf SMM0207 against thermal cycling. EXPECTED \bNFLUENCE ON QUAL\bTY/REL\bAB\bLTY/PERFORMANCE: Impr\bvement \bf s\blder… download now
2020_PCN-D03649-B.pdf Document Number: D03649-B Date: August. 25, 2020 Attention: valued customer Dear. Valued Customer Thank you very much for your great and continued support for business with Murata. This is the official notification that some of our products' label change will be proceeded as detailed below. Please review this, and confirm that you will expect to receive products after this label change. Your understanding and support are highly appreciated. 1. Product Type, Changes, Applicable Accounts: Product Type: Outer box label that is attached as Murata standard. But current your requested label isn't changed, we continue to attach it. Changes: We are going to change 2 points as below. Please refer to the attached documents of "[Label-2] Reference Doc_Eng" for detail. 2. Reasons/Background: (1) To contribute to SDGs by saving environmentally resources. (2) To reduce logistics quality risk about label broken and printing failure. 3. Products Before and After the Change: There are no changes of the… download now
2020_PCN-CC-00007-2020-Rev0.pdf Product Group: CC/Thu Nov 5, 2020/PCN-CC-00007-2020-REV-0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD'S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Change of maximum thickness for solely the 100 pF parts HVCC series DESCRIPTION OF CHANGE: Dear valued customer in order to extent the tolerance range for the 100 pF components of the HVCC series (rated voltage 10 kV, 15 kV and 20 kV) to K=10 % tolerance of capacitance, we increase the maximum thickness of those parts to 9 mm (0.355 inch). The only capacitance value affected is 100 pF and corresponding part numbers are indicated at the end of this notification. REASON FOR CHANGE: availability extension to K=10 % tolerance of capacitance EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: no influence PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see materials list on the succeeding… download now
2020_PCN-CC-00006-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters: 63 Lancaster Avenue, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E OF TH E W OR LD ’S L AR GE S T M AN U F AC TU R E R S O F D IS C R E T E S E M IC ON D U C TOR S AN D P AS S IV E C OM P ON E N T S Product Group : Vis hay Ceramic Capacitors / Ma y 6, 2020 / PCN -CC -00 006 -2020 Rev 0 Change of marking for HVCC series DESCRIPTION OF CHANGE: For better readability of marking on the components of the HVCC series we will change the marking for components with diameter less than 12 mm. The part numbers affected can be found in the attached part number list. Please note that there is no change in quality of the components, this change solely includes the marking for better readabil ity. During the implementation mixed shipments are possible. The marking will change as following: The “HVCC ” for the smaller components will disappear and the voltage rating will be changed to lines indicating… download now
2020_PCN-AC-00502-Rev0.pdf Product Group: Aluminum Capacitors July 20 th, 2020 / PCN -AC -00502 -2020 Rev 0, page 1 of 5 Vishay BCcomponents Austria GmbH Ebentalerstrasse 140, A -9020 Klagenfurt / Austria Phone +43 463 3834 –0 www.vishay.com ON E OF T H E W OR LD ’S LA R GE S T MA N U FA C T U R E R S O F D IS C R E T E S E MIC ON D U C T OR S A N D P A S S IV E C OMP ON E N T S Vishay BCcomponents Capacitors Series 013 RLC, 036 RSP, 116 RLL Change of coating -material of aluminum cases OLD : Polypropylene (PP) coating NEW : Nylon (PA) coating DESCRIPTION OF CHANGE: Due to standardization reasons , the coating material of aluminum cases will be change d from Polypropylene (PP) to Nylon (PA) . CLASSIFICATION OF C HANGE: Minor change of case coating REASON FOR CHANGE: Standardization of aluminum cases EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: No influence in quality and/or reli- ability ; Only visibile change from light blue to transparent color has to be expected . The Nylon (PA) coating is in use… download now
2020_PCN-20200403142530334.pdf download now
2020_PCN-20202008.pdf 8755 W. Higgins Road Suite 500 Chicago, IL 60631 www.littelfuse.com Aug 2 6, 20 20 REED SWITCH Product Improve Packaging Dear Valued Customer s, As Littelfuse continuously driving good quality product, we would like to notify you of a change relating to the Reed Switch product packaging There will be no change in form, fit and function of the switch es . Please refer the current and new packaging pictures below . This new or improved packaging will be used from Sept 28 , 20 20 ; during this transition period, custo mers are expected to receive the product with current shipping package until current inventory in our warehouse and distribution channels are depleted. Below are the affected Reed Switch Series. Current and New P ackaging photo Current Affected Reed Switch Series MDCG -4, FLEX -14, MDSR -10, MLRR -4, MLRR -3, HA15 -2, MRPR -20, MACD -14, MITI -3V1, MDSR -7, MARR -1, MDSR -4 NOTE: ALL MATERIAL PN IN 1000 PCS PER BOX ARE AFFECTED OTHERS LIKE THE MODIFIED SWITCHES NOT IN… download now
2020_PCN-200605-GS66508P-E05.pdf GaN Systems Inc. PROPRIETARY AND CONFIDENTIAL – Do not copy Uncontrolled copy if printed GaN Systems Inc. Document Title: Discontinuance Notification – GS66508P -E05 Document Number: PCN200605 Revision Date CCO Number Description of Revision Revision Author June 5, 2020 First Version Peter Di Maso June 12, 2020 Grammatical fix Peter Di Maso PCN Form GaN Systems Confidential and Proprietary Information Form: F041 rev. 001 PCN Tracking No. PCN200605 Date June 5, 2020 Affected Part Number (s) GS66508P -E0 5 Description of Change(s) Th e GS66508P -E0 5 GaN transistor will no longer be ma nufactured by GaN Systems . Reason(s) for EOL The GS66508P -E05 transistor has been replaced by the better performance, lower cost GS66508B . Replacement part GS66508B Description The replacement GS665 08B uses the same die and is functionally identical the GS66508P -E05 . The GS66508P- E05 has a floating thermal pad which must be connected to the source pad a printed circuit board . The GS66508B connects… download now
2020_PCN-8TEQJ-0159.pdf TO Apri l 17 th , 2020 Document Management Number 8TEQJ-0159 Sato Manabu Planning and Design Department Manager E＆MC Business Division NIDEC COPAL ELECTRONICS CO., LTD. Resin Material Change Dear all Best wishes and thank you for your continuous support. We are writing to inform you that we will change the resin material of our products below as follows . Best Regards １．Influenced products ・Toggle switch FT series ・Toggle switch CFT2 series ・Rocker switch FL series ２．Details ・Material change Component name Before change After change Base PA (polyamide) Containing PFOA PA (polyamide) PFOA free This is only a change to PFOA free material, and the material manufacturer and product brand name remain the same. This material change will bring no change to the product specifications. ３．Reason for the change In order to conform to the EU REA CH restriction on PFOA (CAS 335-67 -1), its salts And PFOA-related substances. (Effective from June 4th, 2020) ４．Time to change Switch b y products… download now
2020_PCN-3E-DVS.pdf 文号No.:日期Date:机种Model: 变更类型 Change type ： ( V )设计Product design ( )制程Parameter ( )设备equipment ( V )零件材料part & material ( )供应商变更supplier ( )产地address 变更原因Change reason: 变更影响Changes affect: 变更描述Changing description: Finished product shell 相关资料Relative data: 客户承认C ustomer approval: Bi-Sonic:确认Approve:林适之 制作Make: 罗辉荣 1. Open the shell with a new mold to increase the gap between the frame leaves to prevent poor contactwith the frame leaves. 产品变更通知单 Product Change Notification 1. Shell mold, the gap between the frame leaves becomes smaller, causing bad parts during use。 The measured inner diameter of the shell mold lineis 74.5mm The inner diameter of the measured mold clampingline is 76.2mm 2019/6/243E-230DVS Before PCN After PCNNew model shell without electrophoresis sample The inner diameter of the shell mold line is 74.5mm 。 The inner diameter of the shell mold line is 76.2mm, and the frame leaf gap is increased. 。 download now
2020_PCN-082_2017_2-OMTB1620204+B1621601+B1718701.pdf PCN-082_2017_2 -OMTB1620204+B1621601+B1718701 Page 1/4 Product Change Notification Beijing, 10 th January 2020 PCN- 082_2017_2 -OMT B1620204+B1621601+B1718701 Case & Cover material + supplier, Magnetic core & Pins connector second source supplier CAS, CASR, CKSR series Date codes for Change 1 Based on the JEDEC JESD46 -B standard Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modifications on CAS, CASR and CKSR series. This letter is to notify you about our planne d procedure to handle this change. we confirm you that LEM is now producing the concerned products for Change 1 “ Plastic case and cover material from Grilon to Frianyl + supplier ” (see page 2) since the following date codes: CASR 25 -P: date code 720006 (06 th January 2020) CKSR 25 -NP: date code 719352 (18 th December 2019) All other… download now
2020_PCN-080_2019_1-OMTM1932203.pdf PCN-080_2019_ 1-OMTM193220 3 Page 1/3 Product Change Notification Machida, 20 th Octo ber 2020 PCN -080 _2019_ 1-OMTM 193220 3 Second source supplier for PCB raw material H AR series – First date code Based on the JEDEC JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on HAR series . Concerned product s: HAR 1000 -S; HAR 500-S/SP1; we confirm you that LEM is now producing the model HAR 1000 -S according to the change explained on the next page and since the date code 4200 52. Explanation on the date code: “4” means the production center, here LEM in Machida (Japan) “20” means the year of the production, here the year 2020 “052 ” means the day of the production, here the 0 52nd day of the year 2020 ( 21st February 2020) PCN-080_2019_ 1-OMTM193220 3… download now
2020_PCN-068_2019_1-OMTB1930902.pdf PCN-068_2019_1 -OMTB1930902 Page 1/4 Product Change Notification Beijing, 25 th March 2020 PCN-068_2019_ 1-OMT B1930902 Plastic Raw Material Change for coil formers, some struts on some LF 2005 models, core support on LF 2005 models LAC; LA305; LA205; LF2005; LA55; LA100P; LA25NP; LV25; LA55; LV25xx s eries INFORMATION UPDATE (see in red on page 3) Based on the JEDEC JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on LAC; LA305; LA205; LF2005; LA55; LA100P; LA25NP; LV25; LA55; LV25xx s eries. Concerned products: LAC 300- S; LAC 300- S/SP1; LAC 300 -S/SP10; LAC 300- S/SP2; LAC 300- S/SP3; LAC 300- S/SP4; LAC 300 -S/SP5; LAC 300- S/SP7; LAC 300 -S/SP8; LAC 300 -S/SP9; LA 205- S/SP1; LA 305- S/SP9; LF 2005- S/SP20; LF 2005- S/SP21; LF 2005- S/SP43;… download now
2020_PCN-064_2020_0-OMTS2029702.pdf PCN-064_2020_0- OMTS2029702 Page 1/6 Product Change Notification Sofi a, 25 th Novem ber 20 20 PCN-0 64_20 20_0-OMT S2029702 New supplier and material for customized terminals LV100 and LV100xx series Based on the JEDEC JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on L V100 and LV100xx series . Concerned products : LA 10- I/SP8; LA 100- I/SP11; LV 100; LV 100/SP16; LV 100/SP17; LV 100/SP25; LV 100/SP38; LV 100/SP41; LV 100/SP47; LV 100/SP48; LV 100/SP51; LV 100/SP58; LV 100/SP59; LV 100/SP60; LV 100/SP66; LV 100/SP67; LV 100/SP69; LV 100/SP71; LV 100/SP72; LV 100/SP77; LV 100/SP79; LV 100/SP80; LV 100/SP81; LV 100/SP82; LV 100 -100; LV 100 -1000; LV 100- 1000/SP13; LV 100-1000/SP16; LV 100- 1000/SP17; LV 100 -1000/SP2; LV 100-1000/SP20; LV 100-… download now
2020_PCN-063_2019_3-OMTG1919101.pdf PCN-063_2019_3 -OMTG1919101 Page 1/5 Product Change Notification Geneva, 31 st August 20 20 PCN-0 63_2019_ 3-OMT G1919101 Tolerances increasing on some mechanical dimensions HOxx-P- and HOxx-S- series Date of data sheets updates (see on page 2 in red) Based on the JEDEC JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on HOxx -P - and HOxx- S- series. Concerned products : HO 60- P-0100; HO 60- P/SP33-1106; HO 60- P/SP50 -0100; HO 100- P-0100; HO 100- P/SP33-1106; HO 120- P-0100; HO 120- P/SP33-1106; HO 120- P/SP50-0100; HO 150- P-0100; HO 180- P-0100; HO 180- P-1100; HO 180- P/SP33-1106; HO 240- P-0100; HO 240- P-0103; HO 250- P-0100; HO 250- P/SP606- 1106; HO 250- P/SP33-1106; HO 77- P/SPH00 -0100; HO 77.1- P/SPH00-0100; HO 93- P/SPH00-0100; HO 116-… download now
2020_PCN-063_2019_2-OMTG1919101.pdf PCN-063_2019_2 -OMTG1919101 Page 1/5 Product Change Notification Geneva, 14 th May 20 20 PCN-0 63_2019_ 2-OMT G1919101 Tolerances increasing on some mechanical dimensions HOxx-P- and HOxx-S- series Update of the picture on page 4 Based on the JEDEC JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on HOxx -P - and HOxx- S- series. Concerned products : HO 60- P-0100; HO 60- P/SP33-1106; HO 60- P/SP50 -0100; HO 100- P-0100; HO 100- P/SP33-1106; HO 120- P-0100; HO 120- P/SP33-1106; HO 120- P/SP50-0100; HO 150- P-0100; HO 180- P-0100; HO 180- P-1100; HO 180- P/SP33-1106; HO 240- P-0100; HO 240- P-0103; HO 250- P-0100; HO 250- P/SP606- 1106; HO 250- P/SP33-1106; HO 77- P/SPH00 -0100; HO 77.1- P/SPH00-0100; HO 93- P/SPH00-0100; HO 116- P/SPH00 -0100; HO 125-… download now
2020_PCN-059_2017_1-OMTB1717901+B1717902.pdf PCN-059_2017_1- OMTB1717901 + B1717902 Page 1/3 Product Change Notification Beijing, 04 th March 2020 PCN-0 59_2017 _1-OMT B1717901 + B1717902 Second source supplier for magnetic circuit LA55, LA100P, LA200P, LA125 series F irst date codes (see page 2) Based on the JEDEC J ESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on LA55, LA100P, LA200P and LA 125 series . This letter is to notify you about our planned procedure to handle this change. Concerned products : LA 25- P; LA 55- P; LA 55- P/SP1; LA 55-P/SP11; LA 55-P/SP2; LA 55-P/SP21; LA 55-P/SP23; LA 55- P/SP26; LA 55- P/SP43 ; LA 55- P/SP44 ; LA 55- P/SP50; LA 55 -P/SP51; LA 55- P/SP52; LA 55-P/SP7; LA 55- TP; LA 55 -TP/SP1; LA 55-TP/SP17; LA 55- TP/SP27; LA 55-TP/SP28; LA 55-TP/SP9; LA 100- P; LA 100-… download now
2020_PCN-054_2020_0-OMTS2021901.pdf PCN-054_2020_0- OMTS2021901 Page 1/6 Product Change Notification Sofi a, 22 nd Octo ber 20 20 PCN-0 54_2020_0-OMT S2021901 Supplier and material change for a small secondary PCB LV100 and LV100xx series Based on the JEDEC JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on LV100 and L V100xx series. Concerned products : LA 10- I/SP8; LA 100- I/SP11; LV 100; LV 100/SP16; LV 100/SP17; LV 100/SP25; LV 100/SP38; LV 100/SP41; LV 100/SP47; LV 100/SP48; LV 100/SP51; LV 100/SP58; LV 100/SP59; LV 100/SP60; LV 100/SP66; LV 100/SP67; LV 100/SP69; LV 100/SP71; LV 100/SP72; LV 100/SP73; LV 100/SP77; LV 100/SP79; LV 100/SP80; LV 100/SP81; LV 100/SP82; LV 100-100; LV 100 -1000; LV 100- 1000/SP13; LV 100-1000/SP16; LV 100-1000/SP17; LV 100 -1000/SP2; LV 100-1000/SP20; LV… download now
2020_PCN-052_2019_2-OMTS1914303.pdf PCN-052_2019_2 -OMTS1914303 Page 1/3 Product Change Notification Sofia , 29 th May 2020 PCN-0 52_2019_ 2-OMT S191430 3 PCBA & PCB supplier + PCB material change H AS S series – Additional date codes (see on page 2) Based on the JEDEC JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on H ASS ser ies. Concerned products : HASS 100 -S; HASS 200 -S; HASS 300 -S; HASS 400 -S; HASS 50 -S; HASS 500 -S; HASS 518 -S; HASS 600 -S; HASS 316 -S/SPH00; HASS 325 -S/SPH00; HASS 361 -S/SPH00; HASS 380 -S/SPH00; HASS 475 -S/SPH00; PCN-052_2019_2 -OMTS1914303 Page 2/3 we confirm you that LEM is now producing the models listed on the previous page according to the change explained here after and since the following date codes: HASS 200 -S - 820082 HASS 400 -S - 820082 HASS… download now
2020_PCN-052_2019_1-OMTS1914303.pdf PCN-052_2019_1 -OMTS1914303 Page 1/2 Product Change Notification Sofia , 23 rd March 2020 PCN-0 52_2019_ 1-OMT S191430 3 PCBA & PCB supplier + PCB material change H AS S series – First date code Based on the JEDEC JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on H ASS series . Concerned products : HASS 100 -S; HASS 200 -S ; HASS 300 -S; HASS 400 -S ; HASS 50 -S; HASS 500 -S; HASS 518 -S; HASS 600 -S; HASS 316 -S/SPH00; HASS 325 -S/SPH00; HASS 361 -S/SPH00; HASS 380 -S/SPH00; HASS 475 -S/SPH00; we confirm you that LEM is now producing the model s HASS 200-S and HASS 400- S according to the change explained on the next page and since the date code 820082 . Explanation on the date code: “8 ” means the production center, here LEM in Sofia (Bulgaria) … download now
2020_PCN-050_2020_0-OMTB2025901.pdf PCN-049_2020_0- OMTG2019501 Page 1/3 Product Change Notification Beijing, 28 th September 20 20 PCN-0 50_2020_0-OMT B2025901 Dimensions correction on data sheets AHR and HOP series Based on the JEDEC JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on AHR and HOP series . Concerned products : AHR 1000 B10; AHR 1000 B420; AHR 1000 B5; AHR 1500 B10; AHR 1500 B420; AHR 2000 B10; AHR 2000 B420; AHR 2000 B5; AHR 500 B10; AHR 500 B420; AHR 800 B10; AHR 800 B420; HOP 1000- SB; HOP 1000- SB/SP2; HOP 1500- SB; HOP 2000- SB; HOP 2000- SB/SP2; HOP 500 -SB/SP1; HOP 800 -SB; PCN-049_2020_0- OMTG2019501 Page 2/3 Chan ge: Description of the technical change : Dimensions correction on data sheets. This consists in some dimensions correction on the data sheets for the… download now
2020_PCN-02_TO-240AA.pdf Product / Process Change Notification N° 2020 -02 N°2020 -02 Page 1 of 7 4.14F12c Date : June 1 6th, 2020 Dear Customer, Please find enclosed all details related to our IXYS /Littelfuse PCN. Important information for your attention and according to JEDEC STANDARD “JESD46”: ◼ Please respond to this PCN by indicating your decision on the approval form, sign it and return to your Sales partner before 31/07/2020. ◼ If we do not receive any response by the due date in the PCN above we consider this as the acceptance of the PC N. After the last order date as stated herein, purchase order s related to the unchanged product(s) cannot be accepted. Your prompt reply will help IXYS /Littelfuse Technology to assure a smooth and well executed transition. Your attention and response to this matter is greatly appreciated . Contact Information: Contact your local Ixys/Littelfuse Sales Partner PCN Samples demand: Contact your local Ixys /Littelfuse Sales Partner . Sample requests are to be submitted no… download now
2020_PCN-017_2020_1-OMTB1933902.pdf PCN-017_2020_1 -OMT B1933902 Page 1/3 Product Change Notification Beijing, 27 th April 2020 PCN-0 17_20 20_1-OMT B1933902 Passive components change CT -P series – First date code Based on the JEDEC JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on CT -P series . Concerned products : CT 0.1- P; CT 0.2- P; CT 0.4- P; CT 0.4 -P/SP4; we confirm you that LEM is now producing the model CT 0.1 -P according to the change explained on the next page and since the date code 720050. Explanation on the date code: “7” means the production center, here LEM Electronics (China) Co., Ltd. “20” means the year of the production, here the year 2020 “050” means the day of the production, here the 050 th day of the year 2020 (19 th February 2020) PCN-017_2020_1 -OMT… download now
2020_PCN-016_2020_0-OMTB2006501.pdf download now
2020_PCN-010_2020_0-OMTS1933901.pdf PCN-010_2020_0- OMTS1933901 Page 1/6 Product Change Notification Sofia , 20 th March 2020 PCN-0 10_20 20_0-OMT S193390 1 PCBA & PCB suppliers + PCB material change LV100 and LV100xx series Based on the JEDEC JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on LV100 and LV100xx series. Concerned products : LV 100; LV 100/SP16; LV 100/SP17; LV 100/SP25; LV 100/SP38; LV 100/SP41; LV 100/SP47; LV 100/SP48; LV 100/SP51; LV 100/SP58; LV 100/SP60; LV 100/SP66; LV 100/SP67; LV 100/SP69; LV 100/SP71; LV 100/SP72; LV 100/SP73; LV 100/SP77; LV 100/SP79; LV 100/SP80; LV 100/SP81; LV 100/SP82; LV 100 -100; LV 100 -1000; LV 100- 1000/SP13; LV 100- 1000/SP16; LV 100-1000/SP17; LV 100 -1000/SP2; LV 100- 1000/SP20; LV 100 -1000/SP22; LV 100 -1000/SP23; LV 100- 1000/SP24;… download now
2020_PCN-004-EMC-change-TO-3P.pdf IF 0208 REV C 1 of 2 PRODUCT CHANGE NOTIFICATION (PCN) # USA 20 20 -00 4 IXYS HAS FOUND IT NECESSARY TO IMPLEMENT A PRODUCT CHANGE. THIS NOTIFICATION IS TO INFORM YOU OF THE CHANGE WHICH MAY AFFECT YOUR PRODUCT/S. IXYS REQUESTS A WRITTEN RESPONSE WITHIN 30 DAYS OF DATE OF T HIS PCN. IF NO RESPONSE IS RECEIVED IXYS WILL CONSID ER THIS CHANGE APPROVED. SUBJECT : TO -3P Molding Co mp ound Ch ange DOC -NUMBER: USA20 20 -00 4 TYPE OF DOCUMENT: Notification of Change for Open Distribution; C ustomers, Distributors, Webpage REVISION: Or igin al release BILL OF MATERIAL MANUFACTURING INSTRUCTION DRAWING OTHER REVISION DATE: June 23 , 2020 DESCRIPTI ON OF CHANGE: As previously communicate d to our cus tomers, Samsung SDI has decided to exit the EMC material business and as a result we have qualifed a n alternate mo lding compound for the T O-3P package. Molding Compound From: Samsung SL7300 HXM To: Hysol MG15 F-0140 Please refer to next page for the list of affected part numbers. Below is the… download now
2020_PCN-003-MSL3-pack-for-TO-268.pdf 3IF 0208 REV C 1 of 3 PRODUCT CHANGE NOTIFICATION (PCN) # USA 20 20 -00 3 IXYS HAS FOUND IT NECESSARY TO IMPLEMENT A PRODUCT CHANGE. THIS NOTIFICATION IS TO INFORM YOU OF THE CHANGE WHICH MAY AFFECT YOUR PRODUCT/S. IXYS REQUESTS A WRITTEN RESPONSE WITHIN 30 DAYS OF DATE OF T HIS PCN. IF NO RESPONSE IS RECEIVED IXYS WILL CONSID ER THIS CHANGE APPROVED. SUBJECT : TO -268 HV MSL3 pack ing DOC -NUMBER: USA20 20 -00 3 TYPE OF DOCUMENT: Notification of Change for Open Distribution; C ustomers, Distributors, Webpage REVISION: Ori gin al release BILL OF MATERIAL MANUFACTURING INSTRUCTION DRAWING OTHER REVISION DATE: Jun e 0 9, 2020 DESCRIPTI ON OF CHANGE: To optimize performance against moisture pene tration, all TO -268 HV pa ckage will be packed to align with MSL3 standard per J -STD -033. Below is the list of affected part numbers: TO -268 HV Product List IXBT12N300HV IXFT220N20X3HV IXTT1N450HV IXBT14N300HV IXFT240N15X3HV IXTT240N15X4HV IXBT16N170AHV IXFT26N100XHV IXTT2N 300P3HV… download now
2020_LFPCN-PG0117.pdf To: Littelfuse Sales, Sales Support & Customers Valued Customer From: Littelfuse Product Management – Industrial Business Unit Subject: SPNH series size 1 XL outer cap thick ness and micro -switch tab change Document Number: LFPCN_PG0117 Da te: 10 /14/20 20 Wit h regards to the above ref erence, Littelfuse would like to inform you about changes that was implemented to SPNH Series pro duct Size 1XL related to outer cap to thickness and microswitch tab . Old Version New Version Chan ge Old version had micro -sw itch tab attached to outer cap separately . New version integrates micro -switch tab into outer cap as a single piece compone nt No change to o verall dimension of the product and t his change does not affect product pe rformance . Reason for Cha nge: To i mprove manuf acturing process and supply chain Old Version New Version Ma rking Chan ge Microswitch Tab Thickness changed from 2.0 to 3 .0 mm on a single piece configuration Rea son for this Chan ge: To i mprove Supply chain… download now
2020_LFPCN-IGBT-PT-2020-01.pdf Littelfuse, Inc. 8755 West Higgins Road, Suite 500 Chicago, IL 60631 USA (773) 628 -1000 LFPCN IGBT -PT -2020 -01 1st of April 20 20 To : Our Valued Customer s From: Littelfuse Product Management Team Subject: Some Discrete IGBTs to be obsoleted In our constant efforts to improve our service to our valued customers and make our supply chain more agile and lean, we are obsoleting the list of part numbers shown in the next pages . These products are currently not highly demanded as they are being substituted by our newest XPT Discrete IGBT product family. We e ncourage you to visit our website in order to find a suitable substitute for your system , if needed. Last time buy: June 15 th, 2020 Effective date: Sept 1st, 202 0 This communication letter is for your information and acknowledgement. If you have any other questions or concerns, please contact your local Littelfuse sales representative or product team below for further assistance : Jose Padilla Product Marketing Manager… download now
2020_Laser_Marking_w.pdf Page 1 of 4 Sr.No. Existing marking ( inkjet ) Proposed marking ( Laser ) 1 KPF ( Capacitor from catalogue ) KPF ( Capacitor from catalogue ) 2 KPF ( Capacitor with design ref ) KPF ( Capacitor with design ref ) 3 MP -4 ( Capacitor from catalogue ) MP -4 ( Capacitor from catalogue ) Page 2 of 4 Sr.No. Existing marking ( inkjet ) Proposed marking ( Laser ) 4 MP -4 ( Capacitor with design ref ) MP -4 ( Capacitor with design ref ) 5 KP3C ( Capacitor from catalogue ) KP3C ( Capacitor from catalogue ) 6 KP3C ( Capacitor with design ref ) KP3C ( Capacitor with design ref ) Page 3 of 4 Sr.No. Existing marking ( inkjet ) Proposed marking ( Laser ) 7 Capacitor with K2/K3/K4 size Capacitor with K2/K3/K4 size 8 Capacitor with K2/K3/K4 size ( with design ref ) Capacitor with K2/K3/K4 size ( with design ref ) 9 DCL -6 ( Capacitor from catalogue ) DCL -6 ( Capacitor from catalogue ) Page 4 of 4 Sr.No. Existing marking ( inkjet ) Proposed marking ( Laser ) 10 DCL -6 ( Capacitor with design ref ) DCL… download now
2020_Horizon-Notification-SF-1205.pdf Page 1 of 2 HORIZON NOTIFICATION Product Group: SFERNICE / May 12 th 20 20 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # SFERNICE POSITION SENSORS ROT – REC – ECO – ECS - RMF SERIES (Various sizes) CHANGE OF EPOXY RESIN (PRE -INFORM ATION) DESCRIPTION OF CHANGE: The e poxy resin reference “A” is commonly used as a mechanical strengthen or structural fixation of various elements of our position sensors product s range (external or internal parts / sub -assemblies ). For some series above and below mentioned, t he current reference “A” (blue) will be replaced by an equivalent performances epoxy resin reference “B” (black ). CLASSIFICATION OF CHANGE : Direct Materials (Major) REASON FOR CHANGE : Obsolescence of… download now
2020_GaN-part-number-change.pdf Effective Date: Oct. 8, 2020 NEW since last revision Effective Nov 1st. 2020 Part Number Description GS-065-008-1-L-E01-MR No longer available. Order GS-065-008-1-L-MR GS-065-008-1-L-MR 650V, 8A, GaN E-HEMT, 5x6 PDFN, Bottom-side cooled GS-065-011-1-L-E01-MR No longer available. Order GS-065-011-1-L-MR GS-065-011-1-L-MR 650V, 11A, GaN E-HEMT, 5x6 PDFN, Bottom-side cooled download now
2020_EOL-008_2020-0.pdf EOL-008_2020_0 Page 1/2 End of Life Notification (EOL) Geneva, 16 th November 2020 EOL-008_2020-0 LTS & LTSR LEM series Not for publication unless permission is granted by LEM To our Valued Customers and Partners, As part of our continued focus toward providing our customers and partners the highest level of service, quality and security, LEM International announces t he End of Life (“EOL”) of the below mentioned curre nt transducers on 31 st December 2021. This is concerning the following models: LTSR 6-NP, LTSR 15-NP, LTSR 25-NP, LTSR 25-NP/SP1 LTS 6-NP, LTS 6-NP/SP2, LTS 6-NP/SP3, LTS 6-NP/SP4, LTS 6-NP/SP14, LTS 6-NP BLISTER 3P LTS 15-NP, LTS 15-NP/SP1, LTS 15-NP/SP5, LTS 15-NP/ SP7 LTS 25-NP, LTS 25-NP/SP4, LTS 25-NP/SP6, LTS 25-NP/ SP7, LTS 25-NP/SP10 Reason: LTS and LTSR LEM part numbers use a specific ASIC. The manufacturer of this ASIC recently informed LEM about the obsolescence of this specific ASIC in 2021. The ASIC producer justified this decision due to th e ASIC… download now
2020_EE-PCN20003-XLR-Balance-Change_v2.pdf F202D -02 PCN Rev 02 /28/ 201 7 Eaton Electronics Division 5735 W. Las Positas Blvd #100 Pleasanton, CA 94588 www.eaton.com/electronics Product Change Noti ce PCN#:EE -PCN 2000 3 April 1 3, 2020 CLASSIFICATION OF CHANGE: Modification to cell management system DESCRIPTION OF CHANG E: Eaton modules contain cell management electronics to maximize the product lifetime by reducing the voltage variation between cells. The XLR -51R3187 -R module contains a shunt type “active” balance circuit, which works to limit the maximum voltage of each cell. The balancing circuit is being modified to reduce the balancing activation voltage from 53.1 V to 49.5 V. REASON FOR CHANGE: Improve system reliability and reduce false over voltage alarms. EXPECTED INFLUENCE O N QUALITY, RELIABILI TY, AND PERFORMANCE: Standby current (leakage current) will increase when running above 49.5 V. Individual cells are expect ed to more consistently run at the same voltage to better achieve maximum prod uct life time. If… download now
2020_Change_of_housing_geometry_S2L_SMT.pdf download now
2020_Advanced-Notice_Discrete-Device-EMC.pdf Page 1 of 11 June 12 th, 2020 8755 W. Higgins Road Suite 5 00 Chicago, Illinois USA 60631 Advanced notice of Molding Compound change for various Discrete Power & IC devices To our valued customers, This is an advisory notice of an upcoming change of the Epoxy Molding Compound (EMC) material used in various discrete power and IC packages. As you maybe aware, Samsung SDI has decided to exit the EMC material business and as a result we are well advanced in qualifying new materials from alternative vendors. In most insta nces we are using materials that we have already qual ified for similar applications and as such we expecting this to be a relatively low risk exercise. As this affects several different technology / package combinations and will result in a number of individual PCNs, we are providing this advan ced overview such that we can work with you as far as possible to minimise the impact and disruption to your business of this upcoming change. The following table sho ws a high… download now
2019_PTN-SF243-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D ’ S L AR G E S T M AN U F A CT U R E R S O F D I S C R E T E S E M I CO N D U C T O R S A N D P A S S I V E C O M P O N E N T S fernice Wirewound Resistors Models RWM4X10, RWM4X22, RWM5X26, RWM6X22 & RWM8X26 End Of Life DESCRIPTION OF CHANGE: Obsolescence. In conformance with our Product Life management procedure, and due to a decreasing demand mixed with heavy investments required for full RoHS compliance (Lead Free without exemptions), Sfernice Division is transferring the RWM4X10, RWM4X22, RWM5X26, RWM6X22 & RWM8X26 series to an end of product Life status. Potential alternatives are offered by Vishay Draloric with G200 or AC series. CLASSIFICATION OF CHANGE: Product Obsolescence REASON FOR CHANGE: Decreasing demand. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: not applicable PRODUCT CATAGORY:… download now
2019_PTN-OSI-1098-Rev0.pdf Product Termination Notification Product Group: Opto Sensors & IRDC 29-OCT-2019 / PTN OSI-1098-2019 Rev. 0 TITLE: Product discontinuation of selected infrared and visible LEDs Affected part numbers are announced for end of life . Recommened alternatives for the infrared emitters a re given in the attached file "PTN OSI-1098-2019 - alternatives.pdf". For the visible LEDs no alternative is recommended. DESCRIPTION OF CHANGE: Product ObsolescenceCLASSIFICATION OF CHANGE : low demand REASON FOR CHANGE : Infrared Emitters PRODUCT CATEGORY : PART NUMBERS / SERIES / FAMILIES AFFECTED: VSMF2890(G/RG)X01 VSMF2893(G/RG/SL)X01 VSMG2000X01 / VSMG2020X01 VSMG285011(G/RG) VSMB10940X01 VSMG10850 VSMB14942 TLWR8902-60 TLWY8905-60 TLHG5100 TLHG5800 TLHP5800 VISHAY SEMICONDUCTORS VISHAY BRAND(s): TIME SCHEDULE: Annotations about time schedule: Last Time Buy Date: 15-APR-2020 Last Time Shipment Date: 14-OCT-2020 25 Tampines Street 92 Keppel Building # 02 - 00 Singapore 528877 Phone: +65 - 6788 - 6668… download now
2019_PTN-OSI-1098-2019Rev.0.pdf Product Termination Notification Product Group: Opto Sensors & IRDC 29-OCT-2019 / PTN OSI-1098-2019 Rev. 0 TITLE: Product discontinuation of selected infrared and visible LEDs Affected part numbers are announced for end of life . Recommened alternatives for the infrared emitters a re given in the attached file "PTN OSI-1098-2019 - alternatives.pdf". For the visible LEDs no alternative is recommended. DESCRIPTION OF CHANGE: Product ObsolescenceCLASSIFICATION OF CHANGE : low demand REASON FOR CHANGE : Infrared Emitters PRODUCT CATEGORY : PART NUMBERS / SERIES / FAMILIES AFFECTED: VSMF2890(G/RG)X01 VSMF2893(G/RG/SL)X01 VSMG2000X01 / VSMG2020X01 VSMG285011(G/RG) VSMB10940X01 VSMG10850 VSMB14942 TLWR8902-60 TLWY8905-60 TLHG5100 TLHG5800 TLHP5800 VISHAY SEMICONDUCTORS VISHAY BRAND(s): TIME SCHEDULE: Annotations about time schedule: Last Time Buy Date: 15-APR-2020 Last Time Shipment Date: 14-OCT-2020 25 Tampines Street 92 Keppel Building # 02 - 00 Singapore 528877 Phone: +65 - 6788 - 6668… download now
2019_PTN-OMV-1100-Rev0.pdf Product Termination Notification Product Group: Opto Modules & Visibles 06-NOV-2019 / PTN OMV-1100-2019 Rev. 0 TITLE: Obsolescence of optocoupler products with low sales By submitting this notice, Vishay is announcing that the product listed herein have reached their end of life and activities have started to cease production in the coming months and discontinue them. The recommended alternates, where available, are li sted here: VO4256H-X007T is the recommended alternative for VO 4254H-X007T VO4256M is the recommended alternative for VO4254M VO4256M-X006 is the recommended alternative for VO4 254M-X006 VO4256M-X007T is the recommended alternative for VO 4254M-X007T VO4154H is the recommended alternative for VO4156H VO4156H-X006 is the recommended alternative for VO4 154H-X006 VO4156H-X007T is the recommended alternative for VO 4154H-X007T VO4156M is the recommended alternative for VO4154M VO4156M-X006 is the recommended alternative for VO4 154M-X006 VO4256D is the recommended… download now
2019_PTN-OMV-1070-Rev0.pdf Product Termination Notification Product Group: Opto Modules & Visibles 18-APR-2019 / PTN OMV-1070-2019 Rev. 0 TITLE: Product discontinuation VLMU5200-xxx-140 Discontinuation of VLMU5200 -385 -140, VLMU5200 -395 -140 and VLMU5200 - 405-140 UV LED series. DESCRIPTION OF CHANGE : Product Obsolescence CLASSIFICATION OF CHANGE : The low demand in the market along with upcoming in vestments for maintaining a special molding tool makes this series no longer feasible to manufacture. REASON FOR CHANGE : LEDs PRODUCT CATEGORY : PART NUMBERS / SERIES / FAMILIES AFFECTED: VLMU5200-385-140, VLMU5200-395-140, VLMU5200-405-14 0 VISHAY SEMICONDUCTORS VISHAY BRAND(s) : TIME SCHEDULE: Annotations about time schedule: Last Time Buy Date: 13-APR-2019 Last Time Shipment Date: 13-APR-2019 SAMPLES AVAILABLE BEGINNING : We need samples of replacement parts for evaluation : Yes No If Yes return this form to contact information belo w. This PCN is considered approved, without further no tification, unless… download now
2019_PTN-NLR-003-_Withdrawal_of_MCT_series_curve_7_Rev1.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355- 2143 U.S.A. Phone (610) 644- 1300 Fax (610) 296- 0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONEN T MKT010 - 06 Withdrawal of M,C,T series Curve 7 DESCRIPTION OF CHANGE: Vishay has the intention to withdraw all parts of M,C,T series curve 7 CLASSIFICATION OF CHANGE: Product Obsolescence REASON FOR CHANGE: Lack of market demand and the obsolescence of the ceramic raw material EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: Not applicable PROD UCT CATEGORY: Resistors, Non -Linear , Thermistors PART NUMBERS/SERIES/FAMILIES AFFECTED: 07B* 07C* 07M* 07T* 07W * C07* M07* T07* A3101P, A3084P, A3085P, A3086P, A3087P, A3121P VISHAY BRAND(s): Vishay Dale TIME SCHEDULE: Las t Time Buy Date: November 1 st 2019 Last Tim e Shipment Date: December 31 st 20 19 SAMPLE AVAILABILITY: Not applicable PRODUCT IDENTIFICATION: Not applicable… download now
2019_PTN-NLR-003-Rev2.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355- 2143 U.S.A. Phone (610) 644- 1300 Fax (610) 296- 0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONEN T MKT010 - 06 Withdrawal of T, M,C series Curve 7 DESCRIPTION OF CHANGE: Vishay has the intention to withdraw all parts of T,M,C series curve 7 CLASSIFICATION OF CHANGE: Product Obsolescence REASON FOR CHANGE: Lack of market demand and the obsolescence of the ceramic raw material EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: Not applicable PROD UCT CATEGORY: Resistors, Non -Linear , Thermistors PART NUMBERS/SERIES/FAMILIES AFFECTED: 07B* / B07* 07C* / C07* 07M* / M07* 07T* / T07* 07W * / W 07* A1310F, A14 51F, A1451P, A203 5F, A2045P, A3071P, A3084P, A3085F, A3085P, A3086P, A3087P, A3101P, A3121P VISHAY BRAND(s): Vishay Dale TIME SCHEDULE: Las t Time Buy Date: November 1 st 2019 Last Tim e Shipment Date: December 31 st 20 19 SAMPLE… download now
2019_PTN-NLR-003-2019Rev2.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355- 2143 U.S.A. Phone (610) 644- 1300 Fax (610) 296- 0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONEN T MKT010 - 06 Withdrawal of T, M,C series Curve 7 DESCRIPTION OF CHANGE: Vishay has the intention to withdraw all parts of T,M,C series curve 7 CLASSIFICATION OF CHANGE: Product Obsolescence REASON FOR CHANGE: Lack of market demand and the obsolescence of the ceramic raw material EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: Not applicable PROD UCT CATEGORY: Resistors, Non -Linear , Thermistors PART NUMBERS/SERIES/FAMILIES AFFECTED: 07B* / B07* 07C* / C07* 07M* / M07* 07T* / T07* 07W * / W 07* A1310F, A14 51F, A1451P, A203 5F, A2045P, A3071P, A3084P, A3085F, A3085P, A3086P, A3087P, A3101P, A3121P VISHAY BRAND(s): Vishay Dale TIME SCHEDULE: Las t Time Buy Date: November 1 st 2019 Last Tim e Shipment Date: December 31 st 20 19 SAMPLE… download now
2019_PTN-NLR-003-2019-Rev1.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355- 2143 U.S.A. Phone (610) 644- 1300 Fax (610) 296- 0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONEN T MKT010 - 06 Withdrawal of M,C,T series Curve 7 DESCRIPTION OF CHANGE: Vishay has the intention to withdraw all parts of M,C,T series curve 7 CLASSIFICATION OF CHANGE: Product Obsolescence REASON FOR CHANGE: Lack of market demand and the obsolescence of the ceramic raw material EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: Not applicable PROD UCT CATEGORY: Resistors, Non -Linear , Thermistors PART NUMBERS/SERIES/FAMILIES AFFECTED: 07B* 07C* 07M* 07T* 07W * C07* M07* T07* A3101P, A3084P, A3085P, A3086P, A3087P, A3121P VISHAY BRAND(s): Vishay Dale TIME SCHEDULE: Las t Time Buy Date: November 1 st 2019 Last Tim e Shipment Date: December 31 st 20 19 SAMPLE AVAILABILITY: Not applicable PRODUCT IDENTIFICATION: Not applicable… download now
2019_PTN-MLC-00004-Rev0.pdf Product Group: Vishay Division M LCC / March 2 6, 201 9/PTN -MLC -000 04-2019 Rev 0 Changes to Available Ratings of VJ31X ROHS Automotive MLCC Series DESCRIPTION OF CHANGE: Several ratings of VJ31X ROHS Automotive MLCC series ar e removed from offering. CLASSIFICATION OF CHANGE: Product Termination REASON FOR CHANGE: In order to maximize MLCC production efficiency and enhance production flexibility, it was decided to phase out partial i tems and streamline our portfolio. F or VJ0402A …31X the suggested replacement is the GA0402D …31M from Automotive HIFREQ Series , datasheet: http://www.vishay.com/doc?45248 EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: Not applicable PRODUCT CATEGORY: Capacitors PART NUMBERS/SERIES/FAMILIES AFFECTED: Part number listing starting page 2 Series : VJ31X ROHS Automotive MLC C Series Datasheet : http://www.vishay.com/do c?45226 VISHAY BRAND(s): Vishay Vitramon T IM E S CHEDUL E: Last Time Buy Date : September 26, 201 9 Last Time Shipment Date :… download now
2019_PTN-MLC-00003-Rev1.pdf download now
2019_PTN-MLC-00003-Rev0.pdf download now
2019_PTN-MLC-00002-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644-1300 Fax (610) 296- 0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONEN T Product Group: Vishay Division MLCC/Feb 28 th 2019/PT N-MLC-0 0002-2 019 Rev 0 Change of available VJ….W1BC hi gh voltage and large body size ratings DESCRIPTION OF CHANGE: Several ratings in high voltage and large body sizes from VJ..W1BC s eries are removed from offering CLASSIFICATION OF CHANGE: Product Termination REASON FOR CHANGE: In order to m aximize MLCC production efficiency and enhance production f lex ibility , it was decided to phase out items. EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: N/A PRODUCT CATEGORY: Capaci tors PART NUMBERS/SERIES/FAMILIES AFFECTED: Series Vishay Basic Commodity VJ…. W1BC , detail PNs attached. Dielectric Size Rated voltage EOL PN. X7R 0805 1000 V VJ0805Y ### ## G # W1BC 1210 500 V VJ1210Y… download now
2019_PTN-MLC-00001-2019-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONEN T Product Group: Vishay Division MLCC/ Feb 26 th 201 9/P TN -MLC -0000 1-201 9 Rev 0 Change of available VJ….W1BC Y5V Hi -Cap ratings DESCRIPTION OF CHANGE: Several ratings from Y5V from VJ..W1BC series are removed. CLASSIFICATION OF CHANGE: Product Termination REASON FOR CHANGE: In order to maximize MLCC production efficiency and enhance production flex ibility , it was decided to phase out partial Y5V items. EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: N/A PRODUCT CATEGORY: Capacitors PART NUMBERS/SERIES/FAMILIES AFFECTED: Series Vishay Basic Commodity VJ…. W1BC , detail PNs attached. VISHAY BRAND(s): Vishay TIME SCHEDULE: Last Time Buy Date: March 31 st 2019 Last Time Shipment Date: August 31 st , 2019 after depletion of inventory… download now
2019_PTN-FC-002-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -065 7 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Product Group: Film Capacitors /8th March 2019 /PTN -FC -002 -2019 Rev 0 Terminati on of Series F1772 S X2 DESCRIPTION OF CHANGE: This PTN informs the termination of F1772S X2 series , with the purpose of streamlining film capacitors portfolio. CLASSIFICATION OF CHANGE: Product Termination REASON FOR CHANGE: Streamline Portfolio EXPECTED INFLUENCE ON QUA LITY/RELIABILITY/PERFORMANCE: Not Applicable PRODUCT CATEGORY: Film Capacitors PART NUMBERS/SERIES/FAMILIES AFFECTED: Affected Part numbers are coded as starting With F1772SX2. VISHAY BRAND(s): Roederstein TIME SCHEDULE: Last Time Buy Date:08 /09/2019 Last Time Shipment Date: 08 /03/2020 This PTN is considered approved, without further notification, unless we receive specific customer… download now
2019_PTN-FC-001-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -065 7 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Product Group: Film Capacitors /8th March 2019 /PTN -FC -001 -2019 Rev 0 Terminati on of Series F1772 -3 300 V -X2 DESCRIPTION OF CHANGE: This PTN i nforms the termination of this RFI X2 series , with the purpose of streamlining film capacitors portfolio. CLASSIFICATION OF CHANGE: Product Termination REASON FOR CHANGE: Streamline Portfolio EXPECTED INFLUENCE ON QUA LITY/RELIABILITY/PERFORMANCE: Not Applicable PRODUCT CATEGORY: Film Capacitors PART NUMBERS/SERIES/FAMILIES AFFECTED: Affected Part numbers are coded as F1772xxx3yyy where “xxx” defines capacitance value and “yyy” defines packaging and terminal configuration. Standard s eries F1772 X2 310Vac can be used as a direct alternative. VISHAY BRAND(s): Roederstein TIME SCHEDULE: Last… download now
2019_PTN-DR-00004-Rev0.pdf Product Group: Vishay Dale Resistors / March 1, 2019 / PTN -DR -000 04-201 9 Rev 0 Product Termination of WSMS2906 and WSMS31 24 families DESCRIPTION OF CHANGE: The WSMS2906 and WSMS3124 product s will be obsoleted. CLASSIFICATION OF CHANGE: Product Obsolescence REASON FOR CHANGE: These products are being obsoleted d ue to no sales on either product for over 3 years . EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: Not applicable PRODUCT CATEGORY: Resistors PART NUMBERS/SERIES /FAMILIES AFFECTED: Vishay P/N ‘s = W SMS2906* and WSMS3124* families . WSMS2906L3000JE , WSMS2906L3000JK , W SMS2906L4000JE , W SMS2906L4000JK , WSMS2906L5000JE , WSMS2906L5000JK WSMS3124L1000JE , WSMS3124L1000JK , W SMS3124L2000JE , W SMS3124L2000JK , WSMS3124L4000JE , WSMS3124L4000JK , W SMS3124L5000JK VISHAY BRAND(s): Vishay Dale TIME SCHEDULE: Last Time Buy Date: Not Applicable, production equipment is no longer available. Last Time Shipment Date: Not Applicable, production equipment is no longer… download now
2019_PTN-DD-028-2019-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T P roduct o bsolescence DESCRIPTION OF CHANGE: Vishay Semiconductor announces the discontinuation of some power module part numbers without replacement. CLASSIFICATION OF CHANGE: Product Obsolescence REASON FOR CHANGE: Discontinued supply of IGBT dice Discontinued supply of the Al Clad metal substrate EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N/A PRODUCT CAT EGORY: Modules PART NUMBERS/SERIES/FAMILIES AFFECTED: Obsolete Part Number Replacement Part Number VS -CPV362M4FPBF NA VS -CPV362M4KPBF NA VS -CPV362M4UPBF NA VS -CPV363M4FPBF NA VS -CPV363M4UPBF NA VS -CPV364M4FPBF NA VS -CPV364M4KPBF NA VS -CPV364M4UPBF NA VS -92 -0173 NA VISHAY BRAND(s): Vishay Semiconductors… download now
2019_PTN-DD-015-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Product Obsolescence DESCRIPTION OF CHANGE: Vishay Diodes Division will discontin ue some Small Signal, Zener and ESD Diodes . CLASSIFICATION OF CHANGE: Product Obsolescence REASON FOR CHANGE: Low / No sales, Portfolio Consolidation EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N/A PRODUCT CAT EGORY: Diodes & Rectifiers PART NU MBERS/SERIES/FAMILIES AFFECTED: Involved Part Numbers are listed from page 2 to 7 VISHAY BRAND(s): Vishay Semiconductors TIME SCHEDULE: Last Time Buy Date: January 18, 2020 Last Time Shipment Date: July 18, 20 20 Last Time return Date: January 18, 2020 Expiration of Ship and Debit: July 18, 2020 SAMPLE AVAILABILITY: N/A PRODUCT IDENTIFICATION:… download now
2019_PTN-DBR-00007-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lancaster Avenue, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com O N E O F T H E WO R L D ’ S L A R G ES T M AN U F AC T U R E R S O F D I S C RE T E SE M I C O N D U C T O RS AN D P A S S I V E C O M PO N E N T Withdrawal of NCT 0603 and NCU 0805 DESCRIPTION OF CHANGE: NCT and NCU Low Ohmic Thick Film Flat Chip Resistor s in case sizes 0603 and 0805 respectively will be disconti nued without replacement. CLASSIFICATION OF CHANGE: Product obsolescence (End of Life) REASON FOR CHANGE: Unviable and non-profitable manufacturing due to lo w market demand. EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMAN CE: Not applicable PRODUCT CATEGORY: Resistors, Discrete PART NUMBERS/SERIES/FAMILIES AFFECTED: NCT06036 NCU08056 All resistance values, TCR, tolerance, and packag ing codes affected. VISHAY BRAND(s): Vishay Beyschlag TIME SCHEDULE: Last Time Buy Date: March 18 th, 2020 Please note that orders… download now
2019_PTN-DBR-00003-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters: 63 Lancaster Avenue, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Product Grou p: Draloric / Be yschla g Resistors /Au gust 1 , 2019/PTN-DBR-00003-2019 Rev0 Product Discontinuation – KKA and KKE Fusible Leaded wire wound resistors in ceramic case DESCRIPTION OF CHANGE: KKA and KKE series of Wirewo und Fusible Leaded Resistors in Ceramic Case will be discontinued without replacement. CLASSIFICATION OF CHANGE : Product obsolescence (End of Life) REASON FOR CHANGE: Unviable and non profitable manufacturing due to low market demand EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N.A. PRODUCT CATAGORY: Resistor, Discrete PART NUMBERS/SERIES/FAMILIES AFFECTED: KKA04* , KKA05*, KKA07*, KKA09*, KKA11*, KKA17*, KKE04*, KKE07*, KKE09*, KKE11*, KKE17*, KKE07L*, KKE09L*, KKE11L* (please refer annex on page 2,… download now
2019_PTN-DBR-00002-Rev0.pdf Product Group: Draloric / Beyschlag Resistors /Aug 1, 2019/PTN-DBR-00002-2019 Rev0 Vishay Intertechnology, Inc. Corporate Headquarters: 63 Lancaster Avenue, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Product Discontinuation – SKA1 and SKA3 Axial Cemented wire wound resistors DESCRIPTION OF CHANGE: SKA1 and SKA3 series of axial cemented wirewound resistors will be discountinued CLASSIFICATION OF CHANGE: Product obsolescence (End of Life) REASON FOR CHANGE: Unviable and non profitable manufacturing due to low market demand EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE : Not applicable PRODUCT CATAGORY: Resistor, Discrete PART NUMBERS/SERIES/FAMILIES AFFECTED: SKA138201KA1000 SKA1A330FMA1000 SKA1B5607KA1000 SKA1B8200KA1000 SKA1C2201KA1000 SKA3B2700KA1000 Closest replacement, with different mechanical dimensions and packing style, available from… download now
2019_PTN-AC-00901-Rev0.pdf Product Group: Aluminum Capacitors/ May 10 , 201 9/PTN -AC -00 901 -2019 Rev 0 End of Life for 516D series DESCRIPTION OF CHANGE: End of life for 516D Axial aluminum capacitors CLASSIFICATION OF CHANGE: ‘Product Termination’ REASON FOR CHANGE: Discontinuance of third party materials EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: NA PRODUCT CATEGORY: Capacitors PART NUMBERS/SERIES/FAMILIES AFFECTED: 516D * VISHAY BRAND(s): Vishay Sprague TIME SCHEDU LE: Last Time Buy Date: Oc to b e r 31 , 2019 Last Time Shipment Date: March 21 , 20 20 SAMPLE AVAILABILITY: NA PRODUCT IDENTIFICATION: NA QUALIFICATION DATA: NA This PTN is considered approved, without further notification, unless we receive specific customer concerns before June 10, 2019 or as specified by contract. ISSUED BY: Walter Bonomo For further information, please contact your regional Vishay office. CONTACT INFORMATION: The Americas Europe Asia Vishay Intertechnology, Inc. Vishay BCcomponents B.V. Vishay Intertechnology… download now
2019_PDN-001.pdf page 1 of 1 4.14F14 P RODUCT D ISCONTINUATION N OTICE PDN No.: 2019/001 IXYS product type: Type Recommended replacement ZY250 - Reason : Low demand Last time order date: 31.10.2019 Last time delivery date: 31.12.2019 Internal Reference: PO_2019-001 In case of any question, please contact Initiator Title/Function Date e-mail Ostmann MP1 22.02.2019 h.ostmann@ixys.de IXYS Semiconductor GmbH Edisonstr. 15 D-68623 Lampertheim Phone: +49-6206-503-xxx Fax: +49-6206-503 -627 Customer response: (please fill in and return by e-mail, fax or mail w ithin 4 weeks) for further questions / information Company: ___________________________________________________ ______ please comment Name & Position: ___________________________________________________ ______ Phone / Fax No.: ___________________________________________________ ______ Comments: ___________________________________________________ ___________________________________________________ ___________________________________________________… download now
2019_PCN_TR-19110_G19-09504.pdf PCN - Product Change Notification No.: Date: Originator: Subject: Related product: Should you have any issues within this PCN, please contact us within the next 30 days. No response will be deemed as your acceptance. TR-19110_G19-09504 16.12.2019 A. Schaffarczyk PH terminal Barrel size: 001 Additional production place SPH-001(*)-P0.5S SPH-001(*)-P0.5L SPH-001T-P0.5C * plating Reason of change: Identification of change: Label marking: Due to increasing number of order to meet smooth delivery response to customers. Additional production and shipping place: current: Utsunomiya plant additonal: Jakarta plant product performance, production, raw material and quality control system remain unchanged. Description of change: schedule: step by step FB_7.5.3.2.3.1JST Deutschland GmbHKüferstr. 15D-73650 W interbach Phone: +49/7181/4007-0 e-mail: customer.service@jst.de www.jst.de register court: Amtsgericht Stuttgart HRB 280991CEO: Masao Yoshimura download now
2019_PCN_TR-19071_G19-05343.pdf PCN - Product Change Notification No.: Date: Originator: Subject: Related product: Thank you very much for your kind understanding and cooperation. Those products can be identified by the product label: UL/CSA mark: Product using material made in Japan only UL mark: Product is using material made in China schedule: 2020 step by step TR-19071_G19-05343 27.09.2019 A. Schaffarczyk ZR header (SM2) CSA standard abolished S( )B-ZR-SM2-TF( ) (LF)(SN)( ) Reason of change: Due to manufacturer's circumstances, this change is carried out. Production for resin material used for this headers will be stopped in Japan. We are able to use the same resin material produced from the same manufacturer, but made in China. By using this material made in China our product will lose the CSA standard. UL standard remain unchanged. There is no effect on other products of the ZH / ZR series. The connector performance remain unchanged. Description of change: identification: FB_7.5.3.2.3.1JST Deutschland… download now
2019_PCN_DD-001-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Additional Final Test Location for SMF (DO -219AB) Commercial Grade Diodes DESCRIPTION OF CHANGE: In addition to the existing final test location in Shanghai , China, Vishay Diodes Division is introducing an additional final test location in Shandong, China for commercial grade Diodes products in SMF (DO -219AB) package. This subcontractor was already introduced before for other Diodes Group Rectifier Packages. There will be no changes in the form, fit and function of the final products shipped to customer . CLASSIFICATION OF CHANGE: Test Site REASON FOR CHANGE: Capacity expansion to support customer increasing demand EXPECTED INFLUENCE ON Q UALITY/RELIABILTY/PERFORMANCE:… download now
2019_PCN_BUR_00123.pdf Eaton Electrical Products Limited Melton Road Burton-on-the-Wolds, LE12 5TH United Kingdom tel: 00 44 (0) 1509 882 600 fax: 00 44 (0) 1509 882 786 Burton-on-the-Wolds, 25 th January 2019 Product Change Notification – PCN_BUR_00123 Dear Customer, As part of our ongoing commitment to customer service and quality of product, Eaton is continually looking at ways to improve its global product lines. In response to direct customers and market feedback, Eaton will implement the following changes to its Eaton’s Bussmann series high speed fuse links offering. High speed fuses links cover plates will be upgraded to aluminum alloy from brass (see list of parts page 3 to 5). Not only will this modification help secure future availability, it also eliminates an environmentally unfriendly plating process. The upgraded design has been fully tested and certified against IEC60269-1&4 and UL0248-1&13. The tests have proved temperature rise, power dissipation, breaking capacity and operating… download now
2019_PCN_ 2019-02_NTC-in-E1-module-types.pdf Product / Process Change Notification N° 2019 - 02 N° 201 9 - 02 Page 1 of 3 4.14F12c Dear Customer, Please find attached our IXYS Technology PCN _ 201 9-02: Important information for your attention: ◼ Please respond to this PCN by indicating your decision on the approval form, sign it and return to your sales partner before October 18th 201 9. ◼ IXYS aligns with the widely -recognized JEDEC STANDARD “JESD46“, which stipulates: “Lack of acknowledgement of the PCN within 30 days constitutes acceptance of the change.“ Your prompt reply will help IXYS to assure a smooth and well executed transition. If IXYS does not hear from your side by the due date, we will assume your full acceptance to this proposed change and its imple mentation. Your attention and response to this matter is greatly appreciated Disclaimer: If we do not receive any response by the date in the PCN above we consider this as the acceptance of the PCN. After the last order date as stated herein, purchase orders related… download now
2019_PCN SIL-009-2017_Update.pdf Advisory – PCN UPDATE Product Group: Vishay Siliconix/ March 20, 2019 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # SUBJECT: POD update related to PCN SIL -0092017 Dear Valued Customer : This advisory is being provided to you as an announcement that when the subject PCN was issued on July 18, 2017 for additional commercial Power Mosfet manufacturing capacity at GEM El ectronics for Vishay’s TO -220 Full -Pack package, the document did not articulate some of the difference s for the dimensions as the GEM version of the package is slightly dif ferent . The updated POD drawing is below for your reference. We have already star ted the process to update the POD/package dimensions on all our documentation including… download now
2019_PCN17-Product-Marking-Change.pdf Product Change Notification Doc#:QF-016 Rev. A Confidential Date Printed: 8/22/2019 Page 1 of 3 Printed Copies of This Document are Uncontrolled PCN number assigned by Quality 3 & 1 17 PCN Date 8-30-19 UnitedSiC Information Initiator Mari-Anne Gagliardi Implementation Date 1-1-20 PCN Information Customer Approval Required Notification 2nly Type of Change Major Minor Obsolescence Change Affects Form Fit Function Reliability N/A The following applies to all change classifications (Major, Minor, Obsolescence) Description of Change: The marking for the products listed below will be changed as attached. USCi to be replaced by USiC Reason for Change: Company business strategy and branding Affected Products: All assembled products, Date codes from 2020 and after. The following only applies to Major and Minor Changes Affected Product Specification (if applicable): See www.unitedsic.com for datasheets Detail of potential impact to customer There will be no change to the Form, Fit, or… download now
2019_PCN16_D2PAK-3L_Assy_Site_Change.pdf Product Change Notification Doc#:QF-016 Rev. A Confidential Date Printed: 8/22/2019 Page 1 of 2 Printed Copies of This Document are Uncontrolled PCN number assigned by Quality 3 & 1 16 PCN Date 8-30-19 UnitedSiC Information Initiator Mari-Anne Gagliardi Implementation Date 11-30-19 PCN Information Customer Approval Required Notification 2nly Type of Change: Major Minor Obsolescence Change Affects Form Fit Function Reliability N/A The following applies to all change classifications (Major, Minor, Obsolescence) Description of Change: D2PAK-3L Assembly & test manufacturing location change. This PCN is being issued to notify customers that UnitedSiC’s subcontractor, Agape Package Manufacturing (APM), will transfer the D2PAK assembly and test lines to a new assembly site (Plant 2) in Chongqing, China from the existing assembly site (Plant 1). UnitedSiC has qualified APM Plant 2 as a new assembly site for part numbers listed below. Full electrical characterization and high reliability… download now
2019_PCN-Weidmüller-ELW1845030000_Abkündigung.pdf download now
2019_PCN-Weidmüller-ELW1845030000_Abkündigung.pdf download now
2019_PCN-TC-006-Rev1.pdf Vishay \bntertechnology, \bnc. Corporate Headquarters 63 Linc\bln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D \b S C R E T E S E M \b C O N D U C T O R S A N D P A S S \b V E C O M P O N E N T CONTACT \bNFORMAT\bON: Th e Americas Vishay Americas Inc. 7557 Rambler R\bad, Suite 575 Dallas, TX 75231-4142 USA Att: David Bell\bmy Ph\bne: (254)479-0010 Fax: +1 214-363-9444 Email: David.Bell\bmy@vishay.c\bm Europe Vishay Israel Ltd. Regi\bnal Marketing Eur\bpe New Industrial Park, P.O.B 87 Dim\bna 8610002 Israel Att: Albert Mallet Ph\bne: +972-8-656-1112 Fax: +972-8-655-8360 Email: Albert.Mallet@Vishay.c\bm Asia VISHAY Intertechn\bl\bgy Asia Pte. Ltd. Regi\bnal Marketing Asia 37A Tampines Street 92, #07-00 Singap\bre 528886 Att: B\b\bn H\b\bi Tan Ph\bne: +65-6780-7759 Fax: +65-6780-7749 Email: B\b\bnh\b\bi.Tan@Vishay.c\bm Product Group: Vishay Tantalum capacitors /… download now
2019_PCN-TC-005-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E WO RL D ’ S L A R G E S T M AN U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S SI V E C O M P O NE N T Approval of VISHAY Israel, Dimona Facility for HI- TMP® WET Tantalum Capacitors, 134D series DESCRIPTION OF CHANGE: Add VISHAY Israel (Dimona) manufacturing facility a s additional approved source for 134D product manufacturing CLASSIFICATION OF CHANGE: Assembly site (Manufacturing Location) REASON FOR CHANGE: WET tantalum products (135D, 138D, ST/STE, etc.) ar e manufactured in both Ta capacitors plant in USA (Tansitor, Bennington) a nd in Israel (Dimona). In accordance with VISHAY contingency pla nning policy, it has been decided to qualify Dimona plant for 134D, WET tantalum capacitors too. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANC E: There will be no effect on the… download now
2019_PCN-SIL-0152019.pdf download now
2019_PCN-SIL-015-Rev0.pdf download now
2019_PCN-SIL-008-Rev0.pdf 1 Product Group: Vishay Siliconix /September 11 th 2019 / PCN - SIL -00 82019 Additional Commercial Low Voltage MOSFET Manufacturing & Test Capacity DESCRIPTION OF CHANGE: Vishay is pleased to announce the qualification for manufacturing and test capacity at ASE Technology Holding Co., Ltd , China (ASE , Weihai) for Vishay’s PPAK 1212 and SSOT23 products. ASE, Weihai is a high-quality subcontracting partner for Vishay and has been in production for Vishay Power MOSFET products for over 5 years. ASE, Weihai is certified to ISO9001, ISO/TS16949 and ISO 14001 standards. CLASSIFICATION OF CHANGE: Manufacturing and Test Capacity Expansion for PPAK1212 and SSOT23 Packages. REASON FOR CHANGE: Capacity expansion. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: There will be no change to electrical performance and footprint of package dimensions. No changes to any datasheets. PRODUCT CATAGORY: Commercial Low Voltage Power MOSFETs. PART NUMBERS/SERIES/FAMILIES AFFECTED: Please see the part… download now
2019_PCN-SIL-007-Rev1.pdf Product Group: Vishay Siliconix/ August 30, 2019/PCN SIL-0072019 Rev1 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # Vishay Siliconix Announces the Qualification New Green Mold Compound for Commercial High Voltage MOSFETs Built in TO-220 Packages DESCRIPTION OF CHANGE: As part of our continuous improvement program, Vishay Siliconix announces the qualification of SUMITOMO E590HT Green Mold Compound for TO-220 packages assembled in ASE Weihai, China (ASE) for Vishay’s High Voltage MOSFET (HVM) products. CLASSIFICATION OF CHANGE: Material set conversion REASON FOR CHANGE: Part of continuous improvement program . EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: Enhancement to long-term product reliability. No… download now
2019_PCN-SIL-005.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # Product Group: Vishay Siliconix/ June 24, 2019/ PCN- SIL-0052019 Manufacturing Capacity Transfer High Voltage MOSFET Die on film and Die on wafer DESCRIPTION OF CHANGE: Vishay Siliconix announces the qualification and release to production of manufacturing capacity transfer from Vishay Xi’an factory to Vishay Simconix factory in Shanghai, China for High Voltage MOSFET die sales products in Die-on-film and Die-on-wafer forms. CLASSIFICATION OF CHANGE: Manufacturing Capacity Transfer REASON FOR CHANGE: To transfer production capacity on Vishay’s High Voltage MOSFET die sales products. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: There will be no change to… download now
2019_PCN-SIL-004.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # Product Group: Vishay Siliconix /June 6thJune , 2019 /PCN - SIL -00 42019 Vishay Siliconix Announces Additional Conversion to Copper Bondwire for Commercial Power MOSFETs DESCRIPTION OF CHANGE: Vishay Siliconix announces the qualification for production of part numbers SI4946BEY -T1 -E3 , SI4946BEY -T1 -GE3 , SI4410BDY -T1 -E3 & SI4410BDY -T1 -GE3 with copper bond -wire in SOIC8 package . Manufacturing of these Low Voltage MOSFET SOIC8 package parts with Copper wire will add to Vishay Siliconix Copper wire product families that have been in production since November 2007 . CLASSIFICATION OF CHANGE: Material set conversion REASON FOR CHANGE: Part of continued… download now
2019_PCN-SF 237-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D ’ S L AR G E S T M AN U F A CT U R E R S O F D I S C R E T E S E M I CO N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # SFERNICE WIREWOUND RESISTORS New Enamel Qualification DESCRIPTION OF CHANGE: In line with our commitment for continuous improvement and procurement safety, Vishay Sfernice is adding a new qualified source for coating Enamel used on wirewound resistors. All products specifications remain unchanged. New Enamel is ROHS compliant but will be fully Lead Free while current Enamel is ROHS compliant using exemption 7(c) I. Color remains the same see pictures in page 2. CLASSIFICATION OF CHANGE: Lead Free switchover REASON FOR CHANGE: Upgrade enamel material to full lead free EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: none PRODUCT CATAGORY: Fixed Resistors PART… download now
2019_PCN-SF-FL232-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D S L AR G E S T M AN U F A CT U R E R S O F D I S C R E T E S E M I CO N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # SFERNICE LTO100 & LTO150 RESISTORS NEW TUBE PACKAGI NG DESCRIPTION OF CHANGE: In line with our commitment for continuous improvement, Vishay Sfernice is implementing new Tube Packaging for LTO 100 & LTO150 Power Thick Film Resistors. · Tube dimensions remain the same but color goes from dark blue to transparent (Photos below) · Pin used for Tube closing will have reduced dimensi ons (drawing below) All LTO products specifications remain unchanged. CLASSIFICATION OF CHANGE: Labeling/Packing REASON FOR CHANGE: Quality/Process improvement EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANC E: none PRODUCT CATAGORY: Resistor PART NUMBERS/SERIES/FAMILIES AFFECTED: all Part… download now
2019_PCN-SF-FL229-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D S L AR G E S T M AN U F A CT U R E R S O F D I S C R E T E S E M I CO N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # SFERNICE D2TO RESISTORS NEW MANUFACTURING PROCESS DESCRIPTION OF CHANGE: In line with our commitment for continuous improvement, Vishay Sfernice is implementing new material and new manuf acturing processes for D2TO020 & D2TO035 Power Thick Film Resistors. New manufacturing proce ss is AEC-Q200 qualified. · Body package: from Thermoset Transfer to Thermoplas tic Injection. · Cleaning after soldering: from manual process to Au tomated machine · Ohmic value adjustment: from sand blasting to Laser Trimming. All other products specifications remain unchanged. CLASSIFICATION OF CHANGE: Assembly Process/Structure REASON FOR CHANGE: Quality/Process improvement EXPECTED INFLUENCE… download now
2019_PCN-SF-FL228-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D S L AR G E S T M AN U F A CT U R E R S O F D I S C R E T E S E M I CO N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # SFERNICE PRECISION POTENTIOMETERS REC34L, REC38L & REC50L new dot peen Marking DESCRIPTION OF CHANGE: In line with our commitment for continuous improvement, Vishay Sfernice is implementing a new Marking for REC34L, REC38L & REC50L linear precision potentiometers. Ink marking is replaced by dot pee n marking. Full SAP Part number will now be marked in addition to Value and date code. · Aeronautic/Military/Space parts will be dot peen ma rked with transparent epoxy protection. · Non-AMS customers parts will be dot peen marked. All other products specifications remain unchanged. CLASSIFICATION OF CHANGE: Marking REASON FOR CHANGE: Product improvement EXPECTED INFLUENCE ON… download now
2019_PCN-SF-245-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Sfernice SMD Molded Dual -In -Line Thin Film Resistor Networks – RMKMS/CNM Series DESCRIPTION OF CHANGE: In line with our commitment for continuous improvement and procurement safety, Vishay Sfernice is transferring the molding process to a new qual ified subcontractor. Products specifications remain unchanged CLASSIFICATION OF CHANGE: Molding/Coating . REASON FOR CHANGE: VISHAY Sfernice is transferring due to the closure of current subcontractor . EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFO RMANCE: This is NOT obsolescence nor a change in the product. The Transfer will have no impact on the form, fit, function and reliability of the devices . Final products, tests and… download now
2019_PCN-SF-244-Rev0.pdf Page 1 of 2 Product Group: SFERNICE / November 15 th 201 9 / PCN -SF -24 4-201 9 Rev 0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # SFERNICE POSITION SENSORS 351HE Series Material Housing Evolution DESCRIPTION OF CHANGE: Plastic housing is made of PA6 -GF30 instead of PBT -GF30 (see picture page 2 ) CLASSIFICATION OF CHANGE : Molding / Coating REASON FOR CHANGE : Better match between the material of the case and its assembly process. EXPECTED INFLUENCE ON QUALITY / RELIABILTY / PERFORMANCE : none PRODUCT CATAGORY : Resistor, variable PART NUMBERS / SERIES / FAMILIES AFFECTED : 351HE Series (Standard and custom PNs) VISHAY BRAND(s) : SFERNICE TIME SCHEDULE : Start Shipment Date Date Code 1949 Last Time Buy… download now
2019_PCN-SF-239-Rev0 RO200 New Packaging.pdf Page 1 of 2 Product Group: SFERNICE / October 7th 201 9 / PCN -SF -239 -201 9 Rev 0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # SFERNICE PRECISION POTENTIOMETERS RO200 series - New Cardboard Packaging DESCRIPTION OF CHANGE: In line with our commitment for continuous improvement, Vishay Sfernice is implementing a new cardboard packaging for the standard RO200 precision potentiometers series . MOQ and MSQ will be adjusted to this new packaging. Lower order quantity remains possible but only on request . Descriptions and Photos attached page 2 CLASSIFICATION OF CHANGE : Packaging REASON FOR CHANGE : Improvement of quality and packaging quantity rationalization (removal of plastic usage) EXPECTED INFLUENCE ON… download now
2019_PCN-SF-239-2019Rev0.pdf Page 1 of 2 Product Group: SFERNICE / October 7th 201 9 / PCN -SF -239 -201 9 Rev 0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # SFERNICE PRECISION POTENTIOMETERS RO200 series - New Cardboard Packaging DESCRIPTION OF CHANGE: In line with our commitment for continuous improvement, Vishay Sfernice is implementing a new cardboard packaging for the standard RO200 precision potentiometers series . MOQ and MSQ will be adjusted to this new packaging. Lower order quantity remains possible but only on request . Descriptions and Photos attached page 2 CLASSIFICATION OF CHANGE : Packaging REASON FOR CHANGE : Improvement of quality and packaging quantity rationalization (removal of plastic usage) EXPECTED INFLUENCE ON… download now
2019_PCN-SF-237-2019Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D ’ S L AR G E S T M AN U F A CT U R E R S O F D I S C R E T E S E M I CO N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # SFERNICE WIREWOUND RESISTORS New Enamel Qualification DESCRIPTION OF CHANGE: In line with our commitment for continuous improvement and procurement safety, Vishay Sfernice is adding a new qualified source for coating Enamel used on wirewound resistors. All products specifications remain unchanged. New Enamel is ROHS compliant but will be fully Lead Free while current Enamel is ROHS compliant using exemption 7(c) I. Color remains the same see pictures in page 2. CLASSIFICATION OF CHANGE: Lead Free switchover REASON FOR CHANGE: Upgrade enamel material to full lead free EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: none PRODUCT CATAGORY: Fixed Resistors PART… download now
2019_PCN-SF-233-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D S L AR G E S T M AN U F A CT U R E R S O F D I S C R E T E S E M I CO N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # SFERNICE PRECISION POTENTIOMETERS Qualification of a new Silver based painting suppli er DESCRIPTION OF CHANGE: In line with our commitment for continuous improvement and procurement safety, Vishay Sfernice is adding a qua lified source for the Silver based conducting painting used at the beginning and the end of the e lectrical travel in Precision Potentiometers (drawing examples in page 2). All products specifications remain unchanged. Current material deliveries supply are becoming ris ky. The new conductive painting remains a Silver filled phenolic polymer resin. Note: this new painting is qualified since 25 years with a different mounting configuration on some P/ Ns… download now
2019_PCN-SF-230-Rev0.pdf MCB POTENTIOMETERS Activation of alternative raw material for terminals RUTP12 DESCRIPTION OF CHANGE: Activation of alternative raw material for terminals RUTP12 . CLASSIFICATION OF CHANGE: Form Fit Function . REASON FOR CHANGE: The previous raw material needed to manufacture the terminals, CuZn39 , is difficult to procure . So an alternative material CuZn36 has been idendif ied and will be activated to replace CuZn39 . The performance s will be the same . All other products specifications remain unchanged. EXPECTE D INFLUENCE ON QUALITY/RELIABIL ITY/PERFORMANCE : None . PRODUCT CATAGORY: MCB Transducers with potentiometer technology for industrial applications. PART NU MBERS/SERIES/FAMILIES AFFECTED: Product family with root code: RUTP12 VISH AY BRAND(s): VISHAY MCB TIME SCHEDULE : April 30 th 201 9. SAMPLE AVAILABILITY : April 2019 . PRODUCT IDENTIFICATION: > Date code (to be sent by Quality Product on customer’s demand ) QUALIFICATION DATA: No risk identified . Tests already done ,… download now
2019_PCN-SF-229-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D S L AR G E S T M AN U F A CT U R E R S O F D I S C R E T E S E M I CO N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # SFERNICE D2TO RESISTORS NEW MANUFACTURING PROCESS DESCRIPTION OF CHANGE: In line with our commitment for continuous improvement, Vishay Sfernice is implementing new material and new manuf acturing processes for D2TO020 & D2TO035 Power Thick Film Resistors. New manufacturing proce ss is AEC-Q200 qualified. · Body package: from Thermoset Transfer to Thermoplas tic Injection. · Cleaning after soldering: from manual process to Au tomated machine · Ohmic value adjustment: from sand blasting to Laser Trimming. All other products specifications remain unchanged. CLASSIFICATION OF CHANGE: Assembly Process/Structure REASON FOR CHANGE: Quality/Process improvement EXPECTED INFLUENCE… download now
2019_PCN-SF-227-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D S L AR G E S T M AN U F A CT U R E R S O F D I S C R E T E S E M I CO N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # SFERNICE PRECISION POTENTIOMETERS 357 new laser Marking DESCRIPTION OF CHANGE: In line with our commitment for continuous improvement, Vishay Sfernice is implementing a new Marking for 357 prec ision potentiometers. Previous sticker marking was displaying a partial description, date code and pins positioning. New laser marked parts will show a complete SAP P/N (conform to Data sheet), date code and pins positioning. Ex : 357-0-1-1S22-103 / 1842 becomes 357B0103MAB251S22 / 1842 All other products specifications remain unchanged. CLASSIFICATION OF CHANGE: Marking REASON FOR CHANGE: Product improvement EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANC E: none PRODUCT… download now
2019_PCN-SF-226-2019-Rev0.pdf MCB POTENTIOMETERS Activation of alternative lubricant grease DESCRIPTION OF CHANGE: Activation of alternative lubricant grease. CLASSIFICATION OF CHANGE: Form Fit Function . REASON FOR CHANGE: Our lubricant grease is obsolete . This g rease makes the contact between wiper and resistive element as smooth as possible in order to increase life. It helps also for low temperature starting torque. A Qualification plan has been performed and a new lubricant grease has been qualified . EXPECTED INFLUENCE O N QUALITY/RELIABIL ITY/PERFORMANCE : None . PRODUCT CATAGORY: MCB Transducers with potentiometer technology for industrial applications. PART NU MBERS/SERIES/FAMILIES AFFECTED: All sensors excluding Non -Contacting with root code: PMR4XX VISHAY BRAND(s): VISHAY MCB TIME SCHEDULE : March 15 th 201 9. SAMPLE AVAILABILITY : Janua ry 2019 . PRODUCT IDENTIFICATION: > Date code (to be sent by Quality Product on customer’s demand ) QUALIFICATION DATA: No risk identified . Tests already done ,… download now
2019_PCN-SF-225-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # MCB POTENTIOMETERS PMR Series New Marking DESCRIPTION OF CHANGE: In line with our commitment for continuous improvement, Vishay MCB is implementing a new marking for PMR single function. Old marking was ink stamping . New parts will be marked with DO T Pen marking All other products specifications remain unchanged. CLASSIFICATION OF CHANGE: Marking. REASON FOR CHANGE: Product Improvement. EXPECTED INFLUENCE ON QUALITY/RELIABIL ITY/PERFORMANCE : None . PRODUCT CATAGORY: MCB Transducers PMR. PART NU MBERS/SERIES/FAMILIES AFFECTED: Potentiometer Family PMR403/404/411/416/421/423/424/425/426/427/428/431 VISHAY BRAND(s): VISHAY SFERNICE MCB TIME SCHEDULE: February 28 th… download now
2019_PCN-SF-00236-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # MCB FIXED RESIST ORS Lead Free Material and P rocess Switchover for VC and C* T Resistor Series DESCRIPTION OF CHANGE: Sfernice MCB Division is pleased to announce a product feature upgrade relating to VC and C *T Resistors series will be manufactured using the lead free material and process. CLASSIFICATION OF CHANGE: Lead free switchover REASON FOR CHANGE: Using lead free vitreous material EXPECTED INFLUENCE ON QUALITY / RELIABILTY / PERFORMANCE : None New vitreous material has been tested a nd qualified. PRODUCT CATE GORY: Fixed Resistor, PART NU MBERS/SERIES/FAMILIES AFFECTED: VC C* T (see list in attachment page 2 -3) VISHAY BRAND(s): VISHAY MCB TIME SCHEDULE:… download now
2019_PCN-PT6-housing-improvement.pdf Piher Sensors & Co ntrols SA Polίgono Industrial Municipal, Vial T2, No 22, 31500 Tudela, Navarra, Spain Piher is an Amph enolTM Company RM Navarra Tomo 551, Folio 7, H oja 5.580 CIF/VAT ESA311699 07 Tel: +34 948 820 450 Fax: +34 948 824 050 www.piher.net PCN rev 1 / Page 1 of 1 Product Change Notice Please be advised that the PT -6 housing brand marking “PIHER SPAIN” embossed letters will be flattened in order to facilitate vacuum pick and place operations. This change is backward compatible so current customers wi ll not be affected . Mechanical and electrical specifications remain unchanged . Current desing (embossed marking ) New design (flat) AF FECTED ARTICLES: all PT -6 references . SAMPLES AVAILABLE: immediately (lead time 2-5 weeks) FIRST DATE TO SHIP CHANGED PARTS : week 13 We thank you in advance for your kind cooperation and remain at your di sposition for any further information you might require. Sinc erely, Satur Rapún Inside sales Manager To: All concern ed From: Satur… download now
2019_PCN-OSI1067-Rev0.pdf Product Change Notification Product Group:Opto Sensors & IRDC 18-APR-2019 / PCN OSI-1067-2019 Rev. 0 TITLE: Change of Photodiode Substrates for VCNL Series from 4 inch to 6 inch Wafers Proximity and Ambient light sensor photodiodes used in the VCNL series are now manufactured on 6 inch wafers instead of the 4 inch wafers used previously. This change results in no change in dev ice characteristics nor in the fit/form function. DESCRIPTION OF CHANGE: Direct Materials (Major) CLASSIFICATION OF CHANGE : Discontinuation of the 4 inch wafer substrates. REASON FOR CHANGE : None. Nevertheless we recommend to test the product in customers application. EXPECTED INFLUENCE ON QUALITY RELIABILITY / PERFORMANCE: Optical Sensors PRODUCT CATEGORY : PART NUMBERS / SERIES / FAMILIES AFFECTED: VCNL4010 VCNL4020 VCNL4020C VCNL3020 VISHAY SEMICONDUCTORS VISHAY BRAND(s) : TIME SCHEDULE: Annotations about time schedule: Start Shipment Date: 01-MAY-2019 SAMPLES AVAILABLE BEGINNING : 01-APR-2019 We need… download now
2019_PCN-OSI-1083-Rev0.pdf Product Change Notification Product Group:Opto Sensors & IRDC 29-JUL-2019 / PCN OSI-1083-2019 Rev. 0 TITLE: Supplier consolidation for VEMD5x10X01 PIN diodes Supplier change for black mold compound. DESCRIPTION OF CHANGE: Direct Materials (Major) CLASSIFICATION OF CHANGE : The PCN is issued to consolidate material suppliers . The new mold compound supplier is known to Vishay u sed for different products since 2016. REASON FOR CHANGE : no change in quality, reliability and performance EXPECTED INFLUENCE ON QUALITY RELIABILITY / PERFORMANCE: Photo Detectors PRODUCT CATEGORY : PART NUMBERS / SERIES / FAMILIES AFFECTED: VEMD5010X01 VEMD5110X01 VISHAY SEMICONDUCTORS VISHAY BRAND(s) : TIME SCHEDULE: Annotations about time schedule: Start Shipment Date: 04-NOV-2019 SAMPLES AVAILABLE BEGINNING : 22-JUL-2019 We need samples for evaluation: Yes No If Yes return this form to contact information belo w. batch code, from 201945 onwards PRODUCT IDENTIFICATION : available on request QUALIFICATION… download now
2019_PCN-OSI-1063-Rev0.pdf DESCRIPTION OF CHANGE: CLASSIFICATION OF CHANGE: REASON FOR CHANGE: EXPECTED INFLUENCE ON QUALITY RELIABILITY / PERFORMANCE: PRODUCT CATEGORY: VISHAY BRAND(s): SAMPLES AVAILABLE BEGINNING: PRODUCT IDENTIFICATION: QUALIFICATION DATA: Customer Distribution & Collection OSI-1063-2019 R ev. 0 (DFP Type: PCN-ECN) Create an email: PCN Form Distribution Lists Documents Product Change Notification Product Group: Opto Sensors & IRDC DISTRIBUTION since 25-FEB-2019 / PCN OSI-1063-2019 Rev. 0 TITLE: Change of Photodiode Wafer Size for IrDA TFBS4711.. from 4 to 6 inch The Photodiodes used in the TFBS4711.. are now manufa ctured on 6 inch wafers instead of the 4 inch wafers used previously. The wafer process and technolog y are the same. There is no change in device characteristics nor in the fit/form function. Direct Materials (Major) Continuous improvement and unavailability of 4" Si wafe r material None. We recommend to test the product in Customers appl ication. IRDA® Transceivers PART NUMBERS /… download now
2019_PCN-OSI-1062-Rev0.pdf DESCRIPTION OF CHANGE: CLASSIFICATION OF CHANGE: REASON FOR CHANGE: EXPECTED INFLUENCE ON QUALITY RELIABILITY / PERFORMANCE: PRODUCT CATEGORY: VISHAY BRAND(s): SAMPLES AVAILABLE BEGINNING: PRODUCT IDENTIFICATION: QUALIFICATION DATA: Product Change Notification Product Group: Opto Sensors & IRDC 25-FEB-2019 / PCN OSI-1062-2019 Rev. 0 TITLE: Change of Photodiode Wafer Size for IrDA TFBx46xx Series from 4 to 6 inch The Photodiodes used in the TFBx46xx Series are now manufactured on 6 inch wafers instead of the 4 inch wafers used previ ously. The wafer process and technology are the sam e. There is no change in device characteristics nor in the f it/form function. Direct Materials (Major) Continuous improvement and unavailability of 4" Si wafer material None. We recommend to test the product in Customers application. IRDA® Transceivers PART NUMBERS / SERIES / FAMILIES AFFECTED: IrDC VISHAY SEMICONDUCTORS TIME SCHEDULE: Annotations about time schedule: Start Shipment Date: 01-JUN-2019… download now
2019_PCN-OSI-1061-Rev0.pdf Product Termination Notification Product Group: Opto Sensors & IRDC 11-MAR-2019 / PTN OSI-1061-2019 Rev. 0 TITLE: Product discontinuation of low running Sensors parts Opto devices listed in the attached part number list are announced for discontinuation. Recommended alternatives - where r elevant - are also given in the partn umber list. For any questions please c ontact PCN owner as mentioned below DESCRIPTION OF CHANGE: Product Obsolescence CLASSIFICATION OF CHANGE : Due to the low demand of listed devices a product a nd production consolidation is necessary to streamline and optimi ze facility resource utilization. In this context the listed devices are announced for being discontinued per the below men tioned dates. REASON FOR CHANGE : Infrared Emitter Chips / Infrared Emitters / Optical Sensors / Photo Detector Chips PRODUCT CATEGORY : PART NUMBERS / SERIES / FAMILIES AFFECTED: T1070PC-SF-F T1090P-SD-F T1110P6-SU-F T163VU-SF-F T165V-SF T337P-SD-F T363P-67-SF-F T5090PC-SD-F… download now
2019_PCN-OSI-1055-Rev0.pdf Product Change Notification Product Group:Opto Sensors & IRDC 30-JAN-2019 / PCN OSI-1055-2019 Rev. 0 TITLE: Change of Photodiode Substrates for IrDA TFDU4.. Series from 4 inch to 6 inch Wafers Photodiodes used in the TFDU4.. series are now manu factured on 6 inch wafers instead of the 4 inch wafers used previously . This change results in no change in device characteristics nor in the fit/for m function. DESCRIPTION OF CHANGE: Direct Materials (Major) CLASSIFICATION OF CHANGE : Discontinuation of the 4 inch wafer substrates. REASON FOR CHANGE : None. Nevertheless we recommend to test the product in customers application. EXPECTED INFLUENCE ON QUALITY RELIABILITY / PERFORMANCE: IRDA® Transceivers PRODUCT CATEGORY : PART NUMBERS / SERIES / FAMILIES AFFECTED: IrDC VISHAY SEMICONDUCTORS VISHAY BRAND(s) : TIME SCHEDULE: Annotations about time schedule: Start Shipment Date: 01-SEP-2019 SAMPLES AVAILABLE BEGINNING : 03-FEB-2019 We need samples for evaluation: Yes No If Yes return this form… download now
2019_PCN-OMV-1099-2019Rev.0.pdf Product Change Notification Product Group: Opto Modules & Visibles 29-OCT-2019 / PCN OMV-1099-2019 Rev. 0 TITLE: Change of Lens Radius for VLMU3500-xxx-120 device series A new molding tool will be required for VLMU3500-xx x-120* series. With the new tool, the lens radius changes from 1.35mm to 1. 53mm. Total height changes from 2.0mm to 2.22mm. Other specifications remain unchanged. DESCRIPTION OF CHANGE: Form Fit Function CLASSIFICATION OF CHANGE : Standardization of molding Tools. REASON FOR CHANGE : There is no influence on quality, reliability and p erformance. EXPECTED INFLUENCE ON QUALITY RELIABILITY / PERFORMANCE: LEDs PRODUCT CATEGORY : PART NUMBERS / SERIES / FAMILIES AFFECTED: VLMU3500-385-120 VLMU3500-395-120 VLMU3500-405-120 VLMU3500-385-120-L VLMU3500-395-120-L VLMU3500-405-120-L VISHAY SEMICONDUCTORS VISHAY BRAND(s) : TIME SCHEDULE: Annotations about time schedule: Start Shipment Date: 30-DEC-2019 Date Code WW01/2020 QUALIFICATION DATA : This PCN is considered approved,… download now
2019_PCN-OMV-1096-Rev0.pdf Product Change Notification Product Group:Opto Modules & Visibles 26-SEP-2019 / PCN OMV-1096-2019 Rev. 0 TITLE: Change of production location for VLMU1610-365- 135 Vishay Optoelectronics Division is announcing that the manufacturing location for the UVA ChipLED VLMU1610-365-135 is changing. T he change involves a location change only. There is no change in the p rocess technology, or bill of material (BOM). DESCRIPTION OF CHANGE: Assembly Site CLASSIFICATION OF CHANGE : Consolidation of production and UV LED team resourc es in one assembly site in order to achieve better productivity and pr oduct supervision to support customers for the VLMU1610-365-135. REASON FOR CHANGE : These products will undergo a comprehensive qualifi cation and characterization program. There are no adverse effe cts on the quality of the product. The typical performance of the part will n ot change. EXPECTED INFLUENCE ON QUALITY RELIABILITY / PERFORMANCE: LEDs PRODUCT CATEGORY : PART NUMBERS / SERIES / FAMILIES… download now
2019_PCN-OMV-1090-Rev0.pdf Product Change Notification Product Group:Opto Modules & Visibles 18-NOV-2019 / PCN OMV-1090-2019 Rev. 0 TITLE: Redesign of select optocoupler phototriac products Vishay Optoelectronics Division is announcing that the Phototriac chip is being changed in the VO4154, VO4156, VO4254, VO4256 product series due to the obsolescence of the existing die DESCRIPTION OF CHANGE : Wafer/Chip/Pellet Layout/Design / Direct Materials (Major) / Bill of Material (Major) CLASSIFICATION OF CHANGE: This change was brought about by the obsolescence a nnouncement of the current supplier of the detector chips used in thes e parts. REASON FOR CHANGE : There is no change in either the package constructi on or the material used in the manufacturing of the package. Only the die are changing. The performance of the redesigned products will mee t the existing product specifications EXPECTED INFLUENCE ON QUALITY RELIABILITY / PERFORMANCE: Optocouplers, Isolators PRODUCT CATEGORY : PART NUMBERS / SERIES / FAMILIES… download now
2019_PCN-OMV-1090-2019Rev.0.pdf Product Change Notification Product Group:Opto Modules & Visibles 18-NOV-2019 / PCN OMV-1090-2019 Rev. 0 TITLE: Redesign of select optocoupler phototriac products Vishay Optoelectronics Division is announcing that the Phototriac chip is being changed in the VO4154, VO4156, VO4254, VO4256 product series due to the obsolescence of the existing die DESCRIPTION OF CHANGE : Wafer/Chip/Pellet Layout/Design / Direct Materials (Major) / Bill of Material (Major) CLASSIFICATION OF CHANGE: This change was brought about by the obsolescence a nnouncement of the current supplier of the detector chips used in thes e parts. REASON FOR CHANGE : There is no change in either the package constructi on or the material used in the manufacturing of the package. Only the die are changing. The performance of the redesigned products will mee t the existing product specifications EXPECTED INFLUENCE ON QUALITY RELIABILITY / PERFORMANCE: Optocouplers, Isolators PRODUCT CATEGORY : PART NUMBERS / SERIES / FAMILIES… download now
2019_PCN-OMV-1086-Rev0.pdf Product Change Notification Product Group:Opto Modules & Visibles 10-SEP-2019 / PCN OMV-1086-2019 Rev. 0 TITLE: Change in manufacturing location for Very High Isolation Voltage Coupler Devices Vishay Optoelectronics Division is announcing that the manufacturing location for Vishay's High Isolation Optocouplers is changin g. The change involves a location change only. There is no change in the pro cess technology, or build of material (BOM). We will also be changing the marking of the product s. The factory code will change to reflect the new location and the UL system code will be removed (except for EXi products). The UL system code is being phased out i n favor of listing the actual product on the certificate. The data sheet will change to reflect these changes to product marking There is no change in the country of manufacture. DESCRIPTION OF CHANGE: Assembly Site CLASSIFICATION OF CHANGE : This change was initiated as part of a improvement program to enhance customer support and to… download now
2019_PCN-OMV-1074-Rev0.pdf Product Change Notification Product Group:Opto Modules & Visibles 03-JUN-2019 / PCN OMV-1074-2019 Rev. 0 TITLE: Redesign of the 1 MBd Analog High Speed Optocoupler, SOIC-8 products This change notice impacts the SFH6315T, SFH6316T a nd SFH6343T products. These are 1 MBd Analog High Speed Optocou pler, SOIC-8 products. The die components, both Emitter and detector are c hanging. In addition there will be a slight change to the ma rking of the product, the UL system code and the de vice option identifier is being removed. The UL system code is being phased out in favor of listing the actual product on the certificate. Data book specifications will not chan ge, however it will be update to reflect the charac teristics of the new die. DESCRIPTION OF CHANGE: Marking / Direct Materials (Major) / Bill of Materi al (Major) CLASSIFICATION OF CHANGE : We are changing the Die to consolidate our vendor s ources. The emitter will change to one manufactured by Vishay. The change in detector die was… download now
2019_PCN-OMV-1071-Rev0.pdf Product Termination Notification Product Group: Opto Modules & Visibles 18-APR-2019 / PTN OMV-1071-2019 Rev. 0 TITLE: Product Discontinuation of low running 7-segment displays Discontinuation of TDSL3150-G, TDSL5150-GH, TDSL516 0-GH, TDSO5150- M. Recommended alternatives, where available, are l isted in the file: "Alternative_Types_PTN-OMV-1071-2019.htm" DESCRIPTION OF CHANGE: Product Obsolescence CLASSIFICATION OF CHANGE : The declining demand for these special selection ty pes in the market along with the obsolescence of the constrained chip speci fications makes this series no longer feasible to manufacture. REASON FOR CHANGE : Displays PRODUCT CATEGORY : PART NUMBERS / SERIES / FAMILIES AFFECTED: TDSL3150-G TDSL5150-GH TDSL5160-GH TDSO5150-M VISHAY SEMICONDUCTORS VISHAY BRAND(s) : TIME SCHEDULE: Annotations about time schedule: Last Time Buy Date: 18-OCT-2019 Last Time Shipment Date: 17-APR-2020 SAMPLES AVAILABLE BEGINNING : We need samples of replacement parts for evaluation : … download now
2019_PCN-OMV-1069-Rev0.pdf Product Change Notification Product Group:Opto Modules & Visibles 03-JUN-2019 / PCN OMV-1069-2019 Rev. 0 TITLE: DIP-6, 1 MBd high speed optocoupler redesign (SFH636 Series) This change notice impacts the SFH636 series of pro ducts only. These are 1 MBd Analog High Speed Optocoupler, DIP-6 products. The die components, both Emitter and detector are c hanging. In addition a typographical errors in the datasheet s will be corrected and there will be a change to the marking of the product, the UL system code and the device option i dentifier is being removed. The UL system code is being phased out in favor of listing the actual product o n the certificate. DESCRIPTION OF CHANGE: Wafer/Chip/Pellet Layout/Design / Bill of Material (Major) CLASSIFICATION OF CHANGE : We are changing the Die to consolidate our vendor s ources. The emitter will change to one manufactured by Vishay. The detector is also changing. REASON FOR CHANGE : These products have undergone a comprehensive quali fication and… download now
2019_PCN-OMV-1068-Rev0.pdf Product Change Notification Product Group:Opto Modules & Visibles 23-APR-2019 / PCN OMV-1068-2019 Rev. 0 TITLE: Redesign of the 100 kBd Analog High Speed Optocoupler, SOIC-8 products. This change notice impacts the SFH6318T, and SFH631 9T products. These are 100 kBd Analog High Speed Optocoupler, SOIC-8 p roducts. The emitter and detector dies are changing. and fra me plating is being changed. There will also be a change to the marking of the p roduct, the UL system code is being removed. The UL system code is being phased out in favor of listing the ac tual product on the certificate. DESCRIPTION OF CHANGE: Direct Materials (Major) CLASSIFICATION OF CHANGE: This change was brought about by the obsolescence o f the current chip by the chip supplier. REASON FOR CHANGE : These products have undergone a comprehensive quali fication and characterization program. There is no adverse effects on the quality and performance of the product. EXPECTED INFLUENCE ON QUALITY RELIABILITY /… download now
2019_PCN-OMV-1065-Rev0.pdf Customer Distribution & Collection OMV-1065-2019 Rev. 0 (DFP Type: PCN -ECN) Create an email: PCN Form Distribution Lists Documents Product Change Notification Product Group:Opto Modules & Visibles DISTRIBUTION since 09-APR-2019 / PCN OMV-1065-2019 Rev. 0 TITLE: Change of forward voltage specification for VLMTG140x Adjustment of VF specification From VF spec VLMTG1400: min 2.75V, typ 2.85V, max 3.2V at 20mA VF spec VLMTG1401: min 2.75V, typ 2.85V, max 3.05V at 2 0mA To VF spec VLMTG1400: min 2.45V, typ 2.8V, max 3.05V at 20 mA VF spec VLMTG1401: min 2.6V, typ 2.8V, max 3.05V at 20m A DESCRIPTION OF CHANGE : Form Fit Function CLASSIFICATION OF CHANGE : Change of forward voltage (VF) specification in order to increase the production yield. The original VF specification has been based on limited initial data. In mass production, a certain yield loss has been experienced at the lower limit of the specified VF ran ge. Therefore two VF bins will be added at the lower end and in turn the… download now
2019_PCN-OMV-1060-Rev0.pdf Product Change Notification Product Group:Opto Modules & Visibles 29-JUL-2019 / PCN OMV-1060-2019 Rev. 0 TITLE: Change To Green Molding Compound for select DIP- 6 Optocouplers Vishay is changing the outer mold compound to an en vironmentally friendly"green" compound. DESCRIPTION OF CHANGE: Molding/Coating CLASSIFICATION OF CHANGE : The outer mold compound is being changed from a non -green to an environmentally green one. This is part of our ongo ing commitment to providing environmentally green products. REASON FOR CHANGE : These products have undergone a comprehensive quali fication and characterization program. There is no adverse effects on the quality and performance of the product. This change will be reflected in the data sheet wit h the "Vishay Green" logo. EXPECTED INFLUENCE ON QUALITY RELIABILITY / PERFORMANCE: Optocouplers, Isolators PRODUCT CATEGORY : PART NUMBERS / SERIES / FAMILIES AFFECTED: Select products from the following product series. Please refer to that attached… download now
2019_PCN-OMV-1054-Rev0.pdf Product Change Notification Product Group:Opto Modules & Visibles 07-FEB-2019 / PCN OMV-1054-2019 Rev. 0 TITLE: Adding vacuum packing to 7 segment displays Adding vacuum packing to prevent 7 Segment Displays from oxidations of leads by contact with Sulfur coming from external air. DESCRIPTION OF CHANGE : Assembly Process/Structure CLASSIFICATION OF CHANGE : Adding vacuum packing to prevent 7 Segment Displays from oxidations of leads by contact with Sulfur coming from environmen t REASON FOR CHANGE : no influence on form fit function EXPECTED INFLUENCE ON QUALITY RELIABILITY / PERFORMANCE: Displays PRODUCT CATEGORY : PART NUMBERS / SERIES / FAMILIES AFFECTED: see attached devive type list VISHAY SEMICONDUCTORS VISHAY BRAND(s) : TIME SCHEDULE: Annotations about time schedule: Start Shipment Date: 01-APR-2019 SAMPLES AVAILABLE BEGINNING : 28-FEB-2019 We need samples for evaluation: Yes No If Yes return this form to contact information belo w. label, date code PRODUCT IDENTIFICATION :… download now
2019_PCN-NLR-002-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355- 2143 U.S.A. Phone (610) 644- 1300 Fax (610) 296- 0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONEN T MKT010 - 06 Introduction additional supplier of peek wire DESCRIPTION OF CHANGE: Vishay has the intention to introduce an additional supplier of peek wire . CLASSIFICATION OF CHANGE: Minor REASON FOR CHANGE: Better availability EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: None PRODUCT CATEGORY: Resistors, Non -Linear , NTC Thermistors PART NUMBERS/SERIES/FAMILIES AFFECTED: See Attachment 1 VISHAY BRAND(s): Vishay BC Components TIME SCHEDULE: Start Shipment Date : December 1 st 2019 Las t Time Buy Date: NA Last Tim e Shipment Date: NA SAMPLE AVAILABILITY: Available upon request PRODUCT IDENTIFICATION: NA QUALIFICATION DATA: Available upon request This P CN is considered approved, without further notification, unless we receive… download now
2019_PCN-MLC-00015-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ONE OF THE W OR LD ’S L AR GE S T M AN U F AC TU R E R S OF D IS C R E TE S E M IC ON D U C TOR S AND P AS S IV E C OM P ON E N T Product Group: Vishay Division MLCC / February 28 , 201 9 / PCN -MLC -00 015 -201 9 Rev 0 Second source supplier for Hi -K X7R Dielectric Powder DESCRIPTION OF CHANGE: 2nd source supplier for Hi -K X7R dielectric CLASSIFICATION OF CHANGE: Raw material REASON FOR CHANGE: As part of our commitment to provide quality products, world -class support and reduce risk in the supply chain, we are pleased to inform you that a second source dielectric material supplier has pa ssed qualification testing for Hi -K X7R dielectric. The tests are conducted in accordance with AEC -Q200 standards. EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: No influence is expected . PRODUCT CATEGORY: Capacitors "Y"… download now
2019_PCN-MLC-00014-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com O N E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Product Group: Vishay Division MLCC / July 26 , 2019 / PCN -MLC -00 014 -2019 Rev 0 Extend Use of C165 Dielectric Material fo r CDR MLCCs DESCRIPTION OF CHANGE: Extend use of C1 65 (Vishay internal designations) dielectric material currently qualified for below listed values CLASSIFICATION OF CHANGE: Change of dielectric material . REASON FOR CHANGE: Improved reliability of products. EXPECTED INFLUENCE ON QUALITY/RELIABIL ITY/PERFORMANCE: None . PRODUCT CATAGORY: Capacitors PART NUMBERS/SERIES/FAMILIES AFFECTED: The dielectric formulation used for selected CDR MLCCs will change from C175 to C165. The C165 material is already qualified, and qualification already performed… download now
2019_PCN-LEM-061.pdf download now
2019_PCN-HG16-COPAL.pdf Product Change Notification Document No. I -0357 Issued: February 21, 2019 NIDEC COPAL CORPORATION Quality Assurance Group To valuable customers: This notice to announce the change of manufacturing location and brand logo. 1) Description and Purpose: ・ Change of Production location In order to maintain stable supply, we have decided to integrate our DC motor manufacturing site in Ichinoseki, Japan, into Vietnam where our main plant for DC motor is located. As we have many years of experience at the Vietnam facility, it is no problems with the change in all aspects including quality and production. ・ Change of Brand logo Due to brand log standardization among Nidec group, nameplate will be changed as blow. 2) Implementation: We will begin manufacturing in September, 2019 ・ We are able to start earlier than the abov e schedule with your approval. Please contact your reginal sales office if you agree on the earlier implementation. ・ Production site of products can be traced by lot number… download now
2019_PCN-Fuji-190729-RSG0B-0330.pdf download now
2019_PCN-FCC32-QAS18310.pdf Page 1/3 Dear Valued customers KAMAYA ELECTRIC CO., LTD. Quality assurance department Product Change Notice Chip Fuse ; “FCC32 series” Material addition / Material change / Production pr ocess change 1. Products Chip Fuse KAMAYA Part number : FCC32 2. Changes 1) Addition of bottom electrode material. 2) Addition of overcoat 1 material. 3) Addition of side electrode material. 4) Glaze substrate material. 5) Change from dicing process to scribing process. 3. Reason 1),2),3) Addition of bottom electrode material, ov ercoat 1 material, and side electrode material. #1 To achieve stable material sourcing by making th e materials common with another products, 4) Glaze substrate material. #1: From the viewpoint of stable procurement of sub strates, I would like to change from transparent glazed substrate to black glazed substrate. #2: Produc8on of transparent glazed substrates will be canceled at suppliers. 5) Change from dicing process to scribing process. #1: Along with… download now
2019_PCN-FC-003-Rev1.pdf Additional Manufacturing Location for MKP1848 and MKP1848C DESCRIPTION OF CHANGE: Vishay manufacturing sites for MKP1848 (pcm=37,5mm and 52,5mm) and for MKP1848C (pcm=27,5mm / 37,5mm and 52,5mm) will be now Famalicao in Portugal (actual site) and Loni in India (additional site) CLASSIFICATION OF CHANGE : Manufacturing site option REASON FOR CHANGE: capacity expansion EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: None PRODUCT CATEGORY: Film Capacitors PART NUMBERS/SERIES/FAMILIES AFFECTED: All MKP1848 part numbers with pitch 37,5mm and 52,5mm All MKP1848C part numbers with pitch 27,5mm/ 37,5mm and 52,5mm VISHAY BRAND(s): Roederstein TIME SCHEDULE: St art Shipment date: shipments will start from 1 st of Nov onwards Last Time Buy Date: n/a Last Time Shipment Date: n/a SAMPLE AVAILABILITY : Yes, available PRODUCT IDENTIFICATION: traceabi lity is given via date code and manufacturing location codes (F: Famalica, L. Loni) QUALIFICATION DATA: yes, available This PCN is considered as… download now
2019_PCN-DR-00009-Rev0.pdf Product Group: Vishay Electro -Films Inc. /7-26 -19 /PCN -DR -00009 -2019 Rev 0 Addition of Technic Ni Plating Chemistr y to Approved Vendors DESCRIPTION OF CHANGE: Add Technic Inc. Ni plating chemistry to approved vendors so the following may be used interchangeably : Ni Plating: Technic Inc., Techni Nickel S MacDermid / Enthone Lectro - Nic CLASSIFICATION OF CHANGE: Wafer/Chip/Pellet Process/Structure, Change in Metallization REASON FOR CHANGE: Need to qualify second source to ensure manufacturing stability, reliability, & uninterrupted delivery of products. EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: None PRODUCT CATEGORY: Hybrids & substrates PART NUMBERS/SERIES/FAMILIES AFFECTED: All parts with Ni plating VISHAY BRAND(s): Vish ay Electro -Films TIME SCHEDULE: Start Shipment Date: October 2019 SAMPLE AVAILABILITY: N/A PRODUCT IDENTIFICATION: chemistries will be used interchangeably as necessary/appropriate QUALIFICATION DATA: Engineering Technical Report 001 -2019 This… download now
2019_PCN-DR-00002-Rev0.pdf Page 1 of 1 Vishay Dale Electronics Inc 1122 23rd St, Columbus, NE 68601 United States Phone +1 (402) 564-3131 Fax +1 (402 ) 563- 6204 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT S Product Change Notification Product Group: Vishay Dale WWSMD Group / February 11, 2019 / PCN-DR -00002- 2019 Rev 0 Addition of Manufacturing Site for WSL 1206, WSL1206- 18, & WSLP 1206 Type Parts DESCRIPTION OF CHANGE Juarez Mexico is being added as an additional manufacturing location, Columbus NE USA and Beer -Sheva Israel will continue to be manufacturing locations CLASSIFICATION OF CHANGE Assembly Site Addition REASON FOR CHANGE D ue to increasing sales volumes, manufacturing is being expanded to Juarez, Mexico, where we currently have other SMD products manufactured such as the WS L2512, and WSC types. EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE None PRODUCT CATEGORY Resistors PART NUMBERS/SERIES/FAMILIES AFFECTED All WSL 1206, W SL… download now
2019_PCN-DI-00457-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F AC T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O NE N T Procedure # IFSC-0806AZ-01, IHHP-0806AZ-01, and IHHP-1008AZ-01 package quantity change, effective immediately DESCRIPTION OF CHANGE: The package quantity on the reel is changing from 2000 pieces to 3000 pieces on the IFSC-0806AZ-01, IHHP-0806AZ-01, and IHHP-1008AZ-01. CLASSIFICATION OF CHANGE: Labeling/Packaging REASON FOR CHANGE: The increase quantity per reel will reduce the customers exchange frequency of the reels. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N/A PRODUCT CATAGORY: Inductors PART NUMBERS/SERIES/FAMILIES AFFECTED: IFSC0806AZER100M01 IFSC0806AZER1R0M01 IFSC0806AZER1R5M01 IFSC0806AZER220M01 IFSC0806AZER2R2M01 IFSC0806AZER3R3M01 IFSC0806AZER3R3M02… download now
2019_PCN-DI-00447.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F AC T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O NE N T Procedure # IWAS and IWTX Product Obsolescence DESCRIPTION OF CHANGE: Several Vishay Transmitter (Tx) and Receiver (Rx) coils are becoming obsolete. CLASSIFICATION OF CHANGE: Product Obsolescence REASON FOR CHANGE: The IWTX and IW AS product lines are moving to a new factory with the availability of new industry standard offers. The below listed products will become obsolete. For a listing of the new alternative products, please visit http://www.vishay.com/inductors/wireless-charging/ An alternative replacement part can be supplied after the last time buy period by contacting magnetics@vishay.com if the standard listings are not acceptable. EXPECTED INFLUENCE ON… download now
2019_PCN-DI-00443-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F AC T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O NE N T Procedure # Marking Change on the G16 Series Connectors DESCRIPTION OF CHANGE: T he Vishay G16 Series Connectors will immediately update the marking method to laser marking with alternate method of ink stamping. Print Orientation on parts will also be updated. CLASSIFICATION OF CHANGE: Marking REASON FOR CHANGE: Vishay is now capable of laser marking and will add this method as an equivalent print method to the ink marking. Due to this, Vishay will also be updating the orientation of the print on the parts. See example figures below. PRODUCT CATAGORY: Connectors PART NUMBERS/SERIES/FAMILIES AFFECTED: G16P-A, G16P-A-101, G16P-A-103, G16P-AB, G16P-AB-101, G16S-A, G16S-A-102,… download now
2019_PCN-DI-00432-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F AC T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O NE N T Procedure # Marking Change on the G20 Series Connectors DESCRIPTION OF CHANGE: T he Vishay G20 Series Connectors will immediately update the marking method to laser marking with alternate method of ink stamping. Print Orientation on parts will also be updated. CLASSIFICATION OF CHANGE: Marking REASON FOR CHANGE: Vishay is now capable of laser marking and will add this method as an equivalent print method to the ink marking. Due to this, Vishay will also be updating the orientation of the print on the parts. See figures below. PRODUCT CATAGORY: Connectors PART NUMBERS/SERIES/FAMILIES AFFECTED: G20P-A, G20P-A-101, G20P-AB, G20P-B, G20S-A, G20S-101, G20S-103, G20S-AB, G20S-B VISHAY… download now
2019_PCN-DI-00424-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F AC T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O NE N T Procedure # IHLP-5050EZ-01 15µH data sheet correction DESCRIPTION OF CHANGE: The DCR typical and maximum is changing on the 15µH inductance value to reflect the corrected testing results. CLASSIFICATION OF CHANGE: Assembly Process/Structure REASON FOR CHANGE: Correct the data sheets. The manufactured part is not changing. The data sheet was created with incorrect data. The DCR Typical is changing from 27.9mΩ to 33mΩ, and DCR maximum is changing from 33mΩ to 35mΩ. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N/A PRODUCT CATAGORY: Inductors PART NUMBERS/SERIES/FAMILIES AFFECTED: IHLP5050EZER150M01 VISHAY BRAND(s): Vishay Dale TIME SCHEDULE: Start Shipment Date: Immediately… download now
2019_PCN-DD-030-Rev0.pdf download now
2019_PCN-DD-029-Rev0.pdf download now
2019_PCN-DD-025-Rev0.pdf 1/3 Product Group: Diodes Division /November 01 , 201 9 / PCN -DD -025 -20 19 Rev. 0 Assembly Location Change for Commercial G rade Superectifier Products DESCRIPTION OF CHANGE : Due to a more strict government policy on environment control in Jinan City , Vishay Diodes Division is transferring assembly location of Superectifier products from the current subcon site in Jinan (Shandong, China ) to a new subcon site in Qingdao (Shandong, China ). Involved packages are DO - 204AL, D O-204AC and DO -201AD. No change in material and process at the new assembly location a nd no change in form, fit and function of all affect ed product s. The difference is explained in the table below. Before After Change Assembly Subcon, Jinan Subcon, Qingdao Final testing Subcon, Jinan Subcon , Jinan CLASSIFICATION OF CHANGE: Assembly Site REASON FOR CHANGE: Capacity enhancement and Risk management EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: No change in product quality, reliability and… download now
2019_PCN-DD-025-2019Rev.0.pdf 1/3 Product Group: Diodes Division /November 01 , 201 9 / PCN -DD -025 -20 19 Rev. 0 Assembly Location Change for Commercial G rade Superectifier Products DESCRIPTION OF CHANGE : Due to a more strict government policy on environment control in Jinan City , Vishay Diodes Division is transferring assembly location of Superectifier products from the current subcon site in Jinan (Shandong, China ) to a new subcon site in Qingdao (Shandong, China ). Involved packages are DO - 204AL, D O-204AC and DO -201AD. No change in material and process at the new assembly location a nd no change in form, fit and function of all affect ed product s. The difference is explained in the table below. Before After Change Assembly Subcon, Jinan Subcon, Qingdao Final testing Subcon, Jinan Subcon , Jinan CLASSIFICATION OF CHANGE: Assembly Site REASON FOR CHANGE: Capacity enhancement and Risk management EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: No change in product quality, reliability and… download now
2019_PCN-DD-024-Rev0.pdf Die Passivation change DESCRIPTION OF CHANGE: Vishay Semicondu ctors announces the change of the die passivation material from one single layer (Silicone E lastomer ) to two layers (Poly amide plus Silicone Elastomer ) on below Part Numbers. Other Fab processes, total passi vation thickness and deposition method will remain unchanged. CLASSIFICATION OF CHANGE: Wafer /Chip/Pellet Process/Structure REASON FOR CHANGE: Obsolescence of the current die passivation material from supplier . EXPECTED INFLUENCE ON QU ALITY/RELIABILITY/PERFORMANCE: There will be no effect on quality, reliability or electrical performance. PRODUCT CATEGORY: Diodes, Thyristors PART NUMBERS/SERIES/FAMILIES AFFECTED: Part Number Part Number Part Number Part Number VS -82 -0546 VS -88 -5094PBF VS -ST1280C06K0L VS -ST173C12CFK1 VS -S1219 VS -88 -6113 VS -ST1280C06K1 VS -ST173C12CFP0 VS -S1294 VS -88 -6113PBF VS -82 -0356 VS -ST173C12CFP1 VS -S1349 VS -88 -6175 VS -82 -2539 VS -ST183C04CFL0 VS -VSKL300 -08PBF VS -88… download now
2019_PCN-DD-024-2019Rev0.pdf Die Passivation change DESCRIPTION OF CHANGE: Vishay Semicondu ctors announces the change of the die passivation material from one single layer (Silicone E lastomer ) to two layers (Poly amide plus Silicone Elastomer ) on below Part Numbers. Other Fab processes, total passi vation thickness and deposition method will remain unchanged. CLASSIFICATION OF CHANGE: Wafer /Chip/Pellet Process/Structure REASON FOR CHANGE: Obsolescence of the current die passivation material from supplier . EXPECTED INFLUENCE ON QU ALITY/RELIABILITY/PERFORMANCE: There will be no effect on quality, reliability or electrical performance. PRODUCT CATEGORY: Diodes, Thyristors PART NUMBERS/SERIES/FAMILIES AFFECTED: Part Number Part Number Part Number Part Number VS -82 -0546 VS -88 -5094PBF VS -ST1280C06K0L VS -ST173C12CFK1 VS -S1219 VS -88 -6113 VS -ST1280C06K1 VS -ST173C12CFP0 VS -S1294 VS -88 -6113PBF VS -82 -0356 VS -ST173C12CFP1 VS -S1349 VS -88 -6175 VS -82 -2539 VS -ST183C04CFL0 VS -VSKL300 -08PBF VS -88… download now
2019_PCN-DD-023-Rev0.pdf Product Group: Diodes Division / September 20 , 2019 / PCN -DD -023 -2019 Rev. 0 1/3 Assembly Site Change for TMBS in TO -263 Wire Bond Package DESCRIPTION OF CHANGE : Vishay Diodes Division is moving the assembly location of TMBS ® (Trench MOS Barrier Schottky) rectifiers in wire bond TO -263 package from Vishay Tianjin factory , China to an existing subcontractor in Shandong, China. This existing subcontractor wa s already introduced before for non -TMBS products in TO -263 package through PCN -DD -001 -2018 . Qualification test has been confirmed to meet and pass all specifications for commercial grade. The datasheet spec. including package outline dimensions remain unchanged and the finish ed good appearance and reel packing variance a re shown in annex. There will be no change in form, fit or function of final products. CLASSIFICATION OF CHANGE: Assembly Site REASON FOR CHANGE: Manufacturing c apacity consolidation for future expansion . EXPECTED INFLUENCE ON… download now
2019_PCN-DD-022-Rev0.pdf Mold Compound change DESCRIPTION OF CHANGE: Vishay Semicondutors announces the mold compound change from SG - 8200DTV to EME -E-500HAC on the below TO -220 and TO -247 Part Numbers. The new mold compound is halogen free as the current one. Taking the chance of this announcement, some POD tolerances will be aligned to Jedec. CLASSIFICATION OF CHANGE: Molding Form, Fit, Function REASON FOR CHANGE: Discontinuation of SG -8200DTV Mold Compound. EXPECTED INFLUENCE ON QU ALITY/RELIABILITY/PERFORMANCE: There will be no effect on quality, reliability or electrical performance. PRODUCT CATEGORY: Diodes & Rectifiers PART NUMBERS/SERIES/FAMILIES AFFECTED: Package Family Part Number POD Drawing Update TO -247 FRED S VS -30CPU04HN3 TO -247 FREDS VS -30EPH06HN3 See note A TO -247 FREDS VS -30EPH06L -N3 TO -247 FREDS VS -60APH03L -N3 TO -247 FREDS VS -60APU04HN3 TO -247 FREDS VS -60APU06HN3 See note C TO -247 FREDS VS -60CPU06 -F TO -247 FRED S VS -60EPU04HN3 TO -247 FREDS VS -60EPU06HN3 See note A… download now
2019_PCN-DD-021-Rev0.pdf Additional Assembly Site and Mold Compound change DESCRIPTION OF CHANGE: Vishay Semiconductor s announces the introduction of an additional assembly site for below commercial TO -247 Part Numbers. The new subcontractor has received international quality system and environmental compliance certification ISO9001 and ISO14001. The mold c omp ound will change from SG -8200DTV to EME -E-500HAC . The new mold compound is hal ogen free as the current one. Package Outline Dimension will be consolidated as illustrated in annex 3 . CLASSIFICATION OF CHANGE: Asse mbly Site Molding Form, Fit, Function REASON FOR CHANGE: Capacity expansion for improving delivery support and discontinuation of SG -8200DTV Mold Compound . EXPECTED INFLUENCE ON QU ALITY/RELIABILITY/PERFORMANCE: There will be no effect on quality, reliability or electrical performance. PRODUCT CATEGORY: Diodes & Rectifiers PART NUMBERS/SERIES/FAMILIES AFFECTED: Family Part Number FREDS VS -30CPH03 -N3 FREDS VS -30CPU04 -N3 FREDS VS… download now
2019_PCN-DD-020-Rev0.pdf Product Obsolescence for TO -247 Part Numbers DESCRIPTION OF CHANGE: Vishay Semiconductors announces the discontinuation of below Part Numbers in TO -247 package . CLASSIFICATION OF CHANGE: Product Obsolescence REASON FOR CHANGE: Nomenclature alignement EXPECTED INFLUENCE ON QU ALITY/RELIABILITY/PERFORMANCE: There will be no effect on quality, reliability or electrical performance. PRODUCT CATEGORY: Diodes & Rectifiers PART NUMBERS/SERIES/FAMILIES AFFECTED: Family Obsolete Part Number Replacement Part Number Datasheet # FRED S VS -30CPH03PBF VS -30CPH03 -N3 94012 FREDS VS -30CPU04PBF VS -30CPU04 -N3 94013 FREDS VS -30EPH03PBF VS -30EPH03 -N3 94017 FREDS VS -30EPH06PBF VS -30EPH06 -N3 94018 FREDS VS -60APU02PBF VS -60APU02 -N3 94021 FREDS VS -60APU04PBF VS -60APU04 -N3 94022 FREDS VS -60APU06PBF VS -60APU06 -N3 94023 FREDS VS -60CPH03PBF VS -60CPH03 -N3 94500 FREDS VS -60CPU02 -F VS -60CPU02 -N3 94657 FREDS VS -60CPU04 -F3 VS -60CPU04 -N3 93189 FREDS VS -60EPU02PBF VS -60EPU02 -N3 94021… download now
2019_PCN-DD-019-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay. com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Assembly process change DESCRIPTION OF CHANGE: Int roduction of mechanical punch on cathode tube for entire S tud product family . Existing crimping Proposed crimping CLASSIFICATION OF CHANGE: Assembly P rocess /Structure REASON FOR CHANGE: Continuous improvement EXPECTED INF LUENCE ON QU ALITY/RELIABILTY/PERFORMANCE: There will be no effect on product quality, reliability or performance. PRODUCT CAT EGORY: Diodes & Rectifiers PART NUMBERS/SERIES/FAMILIES AFFECTED: VS -110RKI120 VS -68 -6205 VS -81RIA40 VS -SD400R20PC VS -110 RKI120M VS -68 -6550 VS -81RIA40PBF VS -SD400R24PC VS -110RKI120MPBF VS -68 -6648 VS -81RIA80 VS -SD500N36PTC VS -110RKI120PBF VS -68 -6648PBF VS… download now
2019_PCN-DD-018-Rev0.pdf Product Group: Diodes Division / August 19 , 201 9 / PCN -DD -018-201 9 Rev. 0 1/1 8 inch Wafer Conversion for 100V TMBS in TO -220 & TO -262 DESCRIPTION OF CHANGE: Vishay Diodes Division is convert ing the wafer source of 100V TMBS in wire bond TO -220 & TO -262 package d products from existing in-house 6inch wafer to new 8inch wafer from outs ourced foundry in Taiwan. There will be no change in form, fit or function of final products. The 8inch wafer source was already introduced before for several wire bond TO -220 & TO -262 packaged P/Ns thru. PCN -DD -004 -2018 and PCN -DD -019 -2018 . CLASSIFICATION OF CHANGE: Wafer Diameter/Location . REASON FOR CHANGE: Process consolidation and future capacity support. EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: The re will be no effect on quality & reliability performance. PRODUCT CATEGORY: Rectifiers PART NUMBERS/SERIES/FAMILI ES AFFECTED: Involved P/N list are listed in below table. TO -220 P/Ns TO -262 P/Ns V20100C -E3/4W V30100C… download now
2019_PCN-DD-016-Rev0.pdf Production move of TO -220FP and TO -220 Part Numbers DESCRIPTION OF CHANGE: Due to an un expected assembly line shut d own, Vishay Semiconductors is forced to interrupt the production of the below Part numbers in the current site. To assure the continuity of the business , the production will be moved to other subcontractors already used for the same packages . Bill of Mater ials will change as shown in annex 1 while package outline dimension s at subcontractor s are shown in annex 2. CLASSIFICATION OF CHANGE: Assembly Site REASON FOR CHANGE: Production lines shut down EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: There will be no effect on quality, reliability or electrical performance. PRODUCT CATEGORY: Diodes & Rectifiers PART NUMBERS/SERIES/FAMILIES AFFECTED: FREDS – TO -220FP FREDS – TO -220 VS -ETH0806FP -M3 VS -ETH0806 -M3 VS -ETH1506FP -M3 VS -ETH1506 -M3 VS -ETH3006FP -M3 VS -ETH3006 -M3 VS -ETL0806FP -M3 VS -ETL0806 -M3 VS -ETL1506FP -M3 VS -ETL1506 -M3 VS… download now
2019_PCN-DD-010-Rev0.pdf MB/MT Bridge product marking DESCRIPTION OF CHANGE: Product marking method will move from device label marking to laser marking. CLASSIFICATION OF CHANGE: Marking REASON FOR CHANGE: Continuous improvement of marking method by means of increased marking permanency. There will be no change on the part marking information printed on the Bridges . EXPECTED INFLUENCE ON QUALITY/RELIABIL ITY/PERFORMANCE: There will be no effect on product performance s. PRODUCT CATEGORY: Diodes & Rectifiers PART NUMBERS/SERIES/FAMILIES AFFECTED: MB BRIDGE VS -26MB05A VS -36MB05A VS -61 -0027 VS -82 -0325 VS -82 -2595 VS -26MB06 VS -36MB100A VS -61 -0044 VS -82 -0326 VS -IA66 VS -26MB100A VS -36MB10A VS -61 -0045 VS -82 -0327 VS -IA66PBF VS -26MB10A VS -36MB120A VS -61 -0047 VS -82 -0328 VS -IA67 VS -26MB120A VS -36MB140A VS -61 -0049 VS -82 -0430 VS -IA67PBF VS -26MB140A VS -36MB160A VS -67 -0509 VS -82 -0472 VS -IB64 VS -26MB160A VS -36MB20A VS -82 -0133 VS -82 -0526 VS -IB64PBF VS -26MB20A VS -36MB40A VS… download now
2019_PCN-DD-008-Rev0.pdf Product Group: Diodes Division / March 20 , 201 9 / PCN -DD -00 8-201 9 Rev 0 1/1 Product Discontinuation Notice of Rectifier Products DESCRIPTION OF CHANGE: Vishay Diodes Division would discontinue some of Rectifie r products . CLASSIFICATION OF CHANGE: Product Discontinuation REASON FOR CHANGE: Low sales, Product portfolio optimization EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N/A PRODUCT CATEGORY: Rectifiers PART NUMBERS/SERIES/FAMILIES AFFECTED: Involved part numbers are listed below. VISHAY BRAND: Vishay General Semiconductor TIME SCHEDULE: Last Time Buy Date: September 20 , 2019 Last Time Shipment Date: March 20 , 20 20 SAMPLE AVAILABILITY: N/A PRODUCT IDENTIFICATION: N/A QUALIFICATION DATA: N/A RESPONSE DATE: This PTN is considered approved, without further notification, unless we receive specific customer concerns before May 20 , 201 9 or as specified by contract. Also the generic LTB/LTS schedule could be changed upon specific customer contract. ISSUED BY: RS Chin,… download now
2019_PCN-DD-007-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T P roduct Obsolescence DESCRIPTION OF CHANGE: Vishay Semiconductor announces the discontinuation of some power module part numbers CLASSIFICATION OF CHANGE: Product Obsolescence REASON FOR CHANGE: Dis continued supply of IGBT die EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N/A PRODUCT CAT EGORY: Modules PART NUMBERS/SERIES/FAMILIES AFFECTED: Obsolete Part Number Replacement Part Number VS -GB100LP120N NA VS -GB100TP120N NA VS -GB50LP120N NA VS -GB50TP120N NA VS -GB75TP120N NA VS -GB100LH120N NA VS -GB100NH120N NA VS -GB100TH120N NA VS -GB150LH120N NA VS -GB150TH120N NA VS -GB200NH120N NA VS -GB200TH120N NA VS -GB300AH120N NA VS -GB300LH120N NA VS -GB300NH120N NA VS… download now
2019_PCN-DD-006-Rev0.pdf 1/1 Product Group: Diodes Division / February 26 , 20 19 / PCN -DD -006 -20 19 Rev 0 Molding Compound C hange for GSIB5S P ackage DESCRIPTION OF CHANGE : Due to the supplier discontinuing the molding compound supply , Vishay Diodes Division is converting the mold ing compound used for GSIB5S to a qualified mold ing compound from the other existing supplier. There is no change in form, fit and function on all involved product s. CLASSIFICATION OF CHANGE: Molding REASON FOR CHANGE : To secure continuous production for this package EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: No change in qual ity and reliability performance PRODUCT CATEGORY: Bridge Rectifier PART NUMBERS/SERIES/FAMILIES AFFECTED: GSIB620 -E3/45 GSIB620N -M3/45 GSIB15A20 -E3/45 GSIB15A20N -M3/45 LVB1560 -M3/45 GSIB640 -E3/45 GSIB640N -M3/45 GSIB15A40 -E3/45 GSIB15A40N -M3/45 LVB2560 -M3/45 GSIB660 -E3/45 GSIB660N -M3/45 GSIB15A60 -E3/45 GSIB15A60N -M3/45 GSIB1580 -5401E3/45 GSIB680 -E3/45 GSIB680N -M3/45… download now
2019_PCN-DD-005-Rev0.pdf Product Group: Diodes Division / Januar y 31 , 201 9 / PCN -DD -00 5-201 9 Rev 0 1/2 /3 Product Discontinuation Notice of High Voltage TRANSZORB ® TVS (≥250V) i n Non - Halogen Free SMX Packages DESCRIPTION OF CHANGE: Vishay Diodes Division would discontinue high voltage TRANSZORB ® TVS (≥250V ) product s with non -halogen free molding compound (pa rt number with suffix –E3 and HE3) in SMX packages for product consolidation . CLASSIFICATION OF CHANGE: Product Discontinuation REASON FOR CHANGE: Product Consolidation to offer only Halogen Free molding compound type for High Voltage TRANSZORB ® TVS (≥250V ) in SMX Packages . EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N/A PRODUCT CATEGORY: TRANSZORB ® TVS PART NUMBERS/SERIES/FAMILIES AFFECTED: Involved part numbers are listed below . Obsoleted P/N Alternative P/N Obsoleted P/N Alternative P/N Obsoleted P/N Alternative P/N P4SMA250A-E3/5A P4SMA250A-M3/5A P6SMB510A-E3/5B P6SMB510A-M3/5B SMAJ530HE3_A/I SMAJ530HM3_B/I… download now
2019_PCN-DD-004-Rev0.pdf Product Group: Diodes Division / January 31 , 201 9 / PCN -DD -004 -2019 Rev. 0 1 /16 Strip Plating Conversion for Automotive Grade TRANSZORB ® TVS and Zener Products in SMA , SMB and SMC Package s DESCRIPTION OF CHANGE: Vishay Diodes Division is chang ing the lead finishing process of automotive grade TRANSZORB ® TVS and Zener products in SMA , SMB and SMC packages from barrel plating to strip plating to improve plating thickness uniformity. It is the same plating process that already introduced in histor ica l PCNs thru. PCN -DD -026 -2012 (Strip Plating Line for Automotive Grade of Folded SMA and SMC Packages ) and PCN -DD -005 -2015 (Strip Plating Conversion for Automotive Grade Rectifier in SMB & SMPC Products ). Qualification test has been confirmed to meet and p ass all specifications for automotive grade and JESD 201 class2 whisker test . There will be no changes in the form, fit or function of the final products . CLASSIFICATION OF CHANGE: Plating method change REASON FOR… download now
2019_PCN-DD-003-Rev0.pdf Product Group: Diodes Division / January 25 , 201 9 / PCN -DD -00 3-2019 Rev. 0 1/6 /2 Additional Pla ting H ouse in China for Axial & Bridge P roducts DESCRIPTION OF CHANGE: Vishay Diodes Division is qualifying an additional plating house for TVS & Rectifier Products in Shandong China. This plating house is a Vishay existing Subcontractor supporting assembly / plating / testing for TO -220, TO -262 & ITO -220 packaged products. There is no change in form, fit and function on all involved products. CLASSIFICATION OF CHANGE: Plating site REASON FOR CHANGE: Increasing plating capacity for delivery support EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: No change in quality and reliability performance PRODUCT CATEGORY: Rectifier & TVS PART NUMBERS/SERIES/FAMILIES AFFECTED: Involved part numbers are listed below table: BU1006-E3/45 BU1206-M3/45 BU2010-M3/51 DGP15-E3/54 1N4007-E3/73 EGP10A-E3/54 BU1006-E3/51 BU1206-M3/51 BU20065S-E3/45 DGP15-E3/73 1N5391-E3/54 EGP10A-E3/73… download now
2019_PCN-DD-002-Rev0.pdf 1/1 Prod uc t G roup: Dio de s Division / January 25, 2019 / PCN -DD -00 2-2019 Rev 0 Die Thickn ess Co nsoli dati on for A utom otive G rade in S M C P ackage Scho ttky Products DESC RIPTION OF CHANGE: Vish ay Di odes Division wil l co nso lidate the die thickness from 14mil to 12mil for a utom otive g rade SMC Sch ottky prod ucts. There will be no ch ange in form, fit or function of the finished produc ts. CLASSIFI CATION OF CHANGE: Di e thickness REASON FOR C HANGE: Proc ess co nso lidation/Capac ity expans ion EXPEC TED INFL UENCE ON QUALIT Y/RE LIABILI TY/PER FOR M ANCE: No cha nges in quali ty and reliabili ty performance PROD UCT CATE GOR Y: Sch ottky Rectifier PART N UM BERS /SERIES/ FAMILI ES AFF ECTED: Involved product groups are listed be low VI SHAY BRAND: Vishay General Semico nductor TIME SC HED ULE: Start Conversi on D ate: April 1 st, 201 9 Last Time Buy of Existing P/N: July 25 , 2019 Last Time Sh ipme nt of Existing P/N: January 25 , 2 020 SAMPLE ABAILABILITY :… download now
2019_PCN-DBR-00008-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D ’ S L AR G E S T M AN U F A CT U R E R S O F D I S C R E T E S E M I CO N D U C T O R S A N D P A S S I V E C O M P O N E N T Chip resistors backend capacity expansion DESCRIPTION OF CHANGE: A new plant is set up in Huizhou, China, to expand backend capacity for taping and measuring chip resistors. Raw materials and pro duction processes remain unaffected by this change. There will be no change in product specification, p roduct quality or part number. CLASSIFICATION OF CHANGE: Assembly site REASON FOR CHANGE: To meet increasing demand of chip resistors and to maintain short lead times, additional backend capacity will be installed in a new plant. EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMAN CE: None PRODUCT CATEGORY: Resistors PART NUMBERS/SERIES/FAMILIES AFFECTED: Thick Film 0402 and Thick Film… download now
2019_PCN-CC-001-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters: 63 Lancaster Avenue, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E OF TH E W OR LD ’S L AR GE S T M AN U F AC TU R E R S O F D IS C R E T E S E M IC ON D U C TOR S AN D P AS S IV E C OM P ON E N T S Product Group : Vis hay Ceramic Capacitors / April 18 , 2019 / PCN -CC -001 -201 9 Rev 0 Change of potting material of 660 Series DESCRIPTION OF CHANGE: In line with our commitment for continuous improvement, Vishay is implementing a new coating material for its 660 series. The color of the coating will change from red to black. There is no impact on form, fit and function. CLASSIFICATION OF CHANGE: Chang e of material REASON FOR CHANGE: Better control of process EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: None PRODUCT CATAGORY: Ceramic Capacitors PART NUMBERS/SERIES/FAMILIES AFFECTED: High Voltage Ceramic DC Disc Capacitors with Axial Leads of 660C *, 660R * Series (For the details… download now
2019_PCN-AC-00003-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com O N E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Product Group: Aluminum Capacitors/November 8, 2019/PCN-AC-00003-2019 Rev 0 Change of electrolyte for High Volt Snap-In and Scr ew Terminal capacitors DESCRIPTION OF CHANGE: With PCN-AC-001-2011 Rev 1, Vishay BCcomponents ann ounced approval of an alternative source for electrolytes for aluminum capacitors with rated vol tage of 350 V and above. This PCN extends the list of aluminum capacitors that can be manufactured with e lectrolytes from this alternative source. CLASSIFICATION OF CHANGE: Direct Materials (Major) REASON FOR CHANGE: Continuity of supply EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANC E: None. Aluminum capacitors manufactured with electro lytes from the… download now
2019_PCN-AC-00002-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355- 2143 U.S.A. Phone (610) 644- 1300 Fax (610) 296- 0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONEN T Product Group: Aluminum Capacitors /May 9 , 2019/PCN- AC-0 00 02-201 9 Rev 0 Packaging change for > Ø76 mm and height of > 195 mm DESCRIPTION OF CHANGE: Screw terminal capacitors with can diameter 76 mm or 90 mm that have can heights of 195 mm or 220 mm were packaged in cardboard boxes with polystyrene trays at the top and bottom. The packaging will be changed to cardboard boxes with environmentally more f riendly cardboard spacers. The cardboard spacers prevent product movement during transport . As a result of this change, the MPQ will change for these products: Diameter Old MPQ New MPQ 76 mm 18 12 90 mm 10 8 CLASSIFICATION OF CHANGE: Labeling/Packing REASON FOR CHANGE : Use of more environmentally friendly / recyclable material EXPECTED… download now
2019_PCN-20190307-S1.pdf Application for approval on 4M change Ref no. : 20190307 -S1 Page(S) : 1 page Date : Mar. 07th, 2019. Company : ECOMAL Europe GmbH Attn : Oliver Acklin / Senior Manager Business Development . CC : Martín Quiroz Saravia / Sales Manager Spain and Portugal SUBJECT : Adding a new laser marking PILKOR Electronics Division. of COWELL Fashion Co.,Ltd. Before After 5. Attachment From : I. Y. So / Sr . Mgr . of Over Seas Dept . CC : D.B. Kim / Q.A. Cowell Fashion C.E.O Y.S. CHOI 6. Customer’s approval result 1. Cause of changing : Due to discontinuation of Co2 marking machine, Fiber laser marking will be added 2. Contents of changing : Adding a Fiber laser marking (Material & Performance are not changed) Approval( ) Reject ( ) Reviewal ( ) Discontinuation Announcement Marking : Co2 laser Marking 1 : Co2 laser Marking 2 : Fiber laser 3. Product to be applied : PCX1 / PCX2 / PCY2 / PCMP / PCMT / PCPW / PCRC Series 4. Effective date : As of Oct. 2019 download now
2019_PCN-19080001-AL.pdf Product / Process Change Notice (PCN) PCN #: 19080001 Issue Date: 2019/8/16 Product Affected: Thin Film Chip Inductor - AL Series Effective Date: 2020/3/31 □ Product Mark □ Date Code □ Packaging ■ Others Contact: All Customers Attachment: ■ Yes □ No DESCRIPTION AND PURP OSE OF CHANGE: Due to the current supplier (Orie ntal Happy Enterprise Co., Ltd. ) of Phosphorus Copper will stop supply the material in the March 31th 2020. Therefore, we will change to the new supplie r (CUPRIM E MATERIAL CO., Ltd.) . We hereby announce that the change will be effective on 2020/3/31 . Please sign back the PCN with your comment, and we'll regard as your acceptance if no response to this PCN within the notice period. DETAIL OF CHANGE: Original Supplier of Phosphorus Copper : Oriental Happy Enterprise Co., Ltd. New Supplier of Phosphorus Copper : CUPRIME MATERIAL CO., Ltd. RELIABILITY / QUALIF ICATION SUMMARY: Please refer to attached report. DATA SHEET CHANGE: □ Yes ■ No VIKING TECH CORPORATION… download now
2019_PCN-1901001-CR-Series.pdf Product / Process Change Notice (PCN) PCN #: 1901001 Issue Date: 201 9-02-18 Product Affected: Thick Film Chip Resistor - CR Series Effective Date: 201 9-02 -18 □ Product Mark □ Date Code □ Packaging █ Others Contact: All Customer Attachment: □ Yes █ No DESCRIPTION AND PURP OSE OF CHANGE: Because Viking’s capacity for CR standard parts is full, so we change the production site . Please refer to below “Detail of Change ”. And these change s will not impact form, fit and function We hereby announce that the change will be effective on February 18th , 201 9. And we ’ll regard as your acceptance if no response to this PCN within the notice period. DETAIL OF CHANGE: 1. Dimensions Before change: After change: 2.Standard Electrical Specifications Before change: After change: 3. Product Label : The part number on the product label for new production site will be “CRxxxx -“, please refer to the product label as below. (It is just an example). RELIABILITY / QUALIF ICATION SUMMARY: N/A DATA SHEET… download now
2019_PCN-083_2019_0-OMTS1926901.pdf PCN-083_2019_0- OMTS1926901 Page 1/5 Product Change Notification Sofi a, 11 th Dec ember 2019 PCN-0 83_2019_0-OMT S1926901 Second source for primary resistors LV100xx series Based on the JEDEC JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on LV100xx series. Concerned products : LV 100 -100; LV 100 -1000; LV 100- 1000/SP13; LV 100-1000/SP16; LV 100- 1000/SP17; LV 100 -1000/SP2; LV 100-1000/SP20; LV 100- 1000/SP22; LV 100-1000/SP23; LV 100 -1000/SP24; LV 100- 1000/SP25; LV 100-1000/SP29; LV 100-1000/SP9; LV 100 -1200; LV 100- 1200/SP8; L V 100 -150/SP4; LV 100 -1500; LV 100- 1500/SP3; LV 100- 1500/SP4; LV 100- 1500/SP7; LV 100 -1600/SP3; LV 100- 1600/SP4; LV 100 -2000; LV 100- 2000/SP10; LV 100- 2000/SP11; LV 100-2000/SP12; LV 100 -2000/SP15; LV… download now
2019_PCN-082_2017_1-OMTB1620204_B1621601_B1718701.pdf PCN-056_2019_0- OMTxxx Page 1/4 Product Change Notification Beijing, 08 th October 201 9 PCN- 082_2017 _1-OMT B1620204+B1621601+B1718701 Case & Cover material + supplier, Magnetic core & Pins connector second source supplier CAS, CASR, CKSR serie s F irst date co de Magnetic co re (Change 2) Based on the JEDEC JESD46 -B standard Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modifications on CAS, CASR and CKSR series. This letter is to notify you about our planned procedure to handle this change. we confirm you that LEM is now producing the concerned products for Change 2 (see page 3) including the change “ Magnetic core second source supplier” since the date code 718339. Explanation on the date code: “7 ” means the production center, here LEM Electronics (China) Co., Ltd. “18” means the year… download now
2019_PCN-082_2017_1-OMTB1620204+B1621601+B1718701.pdf PCN-056_2019_0- OMTxxx Page 1/4 Product Change Notification Beijing, 08 th October 201 9 PCN- 082_2017 _1-OMT B1620204+B1621601+B1718701 Case & Cover material + supplier, Magnetic core & Pins connector second source supplier CAS, CASR, CKSR serie s F irst date co de Magnetic co re (Change 2) Based on the JEDEC JESD46 -B standard Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modifications on CAS, CASR and CKSR series. This letter is to notify you about our planned procedure to handle this change. we confirm you that LEM is now producing the concerned products for Change 2 (see page 3) including the change “ Magnetic core second source supplier” since the date code 718339. Explanation on the date code: “7 ” means the production center, here LEM Electronics (China) Co., Ltd. “18” means the year… download now
2019_PCN-080_2019_0-OMTM1932203.pdf PCN-080_2019_0 -OMTM193220 3 Page 1/5 Product Change Notification Machida, 11 th December 2019 PCN -080_2019_0 -OMTM193220 3 Second source supplier for PCB raw material H AR series Based on the JEDEC JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on HAR series . Concerned product s: HAR 1000 -S; HAR 500 -S; H AR 500 -S/SP1; Chan ge: Description of the technical change : Second source supplier for FR4 glass epoxy used for printed circuit board (raw material of PCB). PCB material is still the same as before. Specifications and thickness are the same specifications between the current supplier material and the second source supplier material. This second source supplier and the second source PCB material are already used for some other LEM p roducts (HAZ… download now
2019_PCN-069_2019_0-OMTB1928201.pdf PCN-069_2019_0- OMTB1928201 Page 1/3 Product Change Notification Beijing, 20 th Novemb er 2019 PCN-0 69_2019_0-OMT B1928201 Add ing a shrinkage tube on the cable HTA series (models with output cable) Based on the JEDEC JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on HTA series (models with output cable). Concerned products : HTA 100- S/SP5; HTA 250- S/SP3; HTA 500- S/SP4; HTA 1000- S/SP13; HTA 1000- S/SP18; HTA 1000- S/SP9; PCN-069_2019_0- OMTB1928201 Page 2/3 Chan ge: Description of the technical change : Adding a shrinkage tube on the cable after overmould the cable. Reason of the technical change: Avoiding the gap between cable and overmould to avoid potting to escape PCN-069_2019_0- OMTB1928201 Page 3/3 Impact on the product: On the form: NO… download now
2019_PCN-068_2019_0-OMTB1930902.pdf PCN-068_2019_0- OMTB1930902 Page 1/7 Product Change Notification Beijing, 20 th Novemb er 2019 PCN-0 68_2019_0-OMT B1930902 Plastic Raw Material Change for coil formers, some struts on some LF 2005 models, core support on LF 2005 models LAC; LA305; LA205; LF2005; LA55; LA100P; LA25NP; LV25; LA55; LV25xx s eries Based on the JEDEC JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on L AC; L A3 05; LA205; LF2005; LA55; LA100P; LA25NP; LV25; LA55; LV25xx s eries. Concerned products: LAC 300- S; LAC 300- S/SP1; LAC 300 -S/SP10; LAC 300- S/SP2; LAC 300- S/SP3; LAC 300- S/SP4; LAC 300 -S/SP5; L AC 300 -S/SP7; LAC 300 -S/SP8; LAC 300 -S/SP9; LA 205- S/SP1; LA 305- S/SP9; LF 2005- S/SP20; LF 2005- S/SP21; LF 2005- S/SP43; PCN-068_2019_0- OMTB1930902 Page 2/7 LA 55… download now
2019_PCN-063_2019_1-OMTG1919101.pdf PCN-063_2019_1 -OMTG1919101 Page 1/5 Product Change Notification Geneva, 15 th Novem ber 2019 PCN-0 63_2019_ 1-OMT G1919101 Tolerances increasing on some mechanical dimensions HOxx-P- and HOxx-S- series Update of the picture on page 4 Based on the JEDEC JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on HOxx -P - and HOxx- S- series. Concerned products : HO 60- P-0100; HO 60- P/SP33-1106; HO 60- P/SP50 -0100; HO 100- P-0100; HO 100- P/SP33-1106; HO 120- P-0100; HO 120- P/SP33-1106; HO 120- P/SP50-0100; HO 150- P-0100; HO 180- P-0100; HO 180- P-1100; HO 180- P/SP33-1106; HO 240- P-0100; HO 240- P-0103; HO 250- P-0100; HO 250- P/SP606- 1106; HO 250- P/SP33-1106; HO 77- P/SPH00 -0100; HO 77.1- P/SPH00-0100; HO 93- P/SPH00-0100; HO 116- P/SPH00 -0100; HO… download now
2019_PCN-063_2019_0-OMTG1919101.pdf PCN-063_2019_0- OMTG1919101 Page 1/5 Product Change Notification Geneva, 23 rd October 2019 PCN-0 63_2019_0-OMT G1919101 Tolerances increasing on some mechanical dimensions HOxx-P- and HOxx-S- series Based on the JEDEC JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on HOxx -P - and HOxx- S- series. Concerned products : HO 60- P-0100; HO 60- P/SP33-1106; HO 60- P/SP50 -0100; HO 100- P-0100; HO 100- P/SP33-1106; HO 120- P-0100; HO 120- P/SP33-1106; HO 120- P/SP50-0100; HO 150- P-0100; HO 180- P-0100; HO 180- P-1100; HO 180- P/SP33-1106; HO 240- P-0100; HO 240- P-0103; HO 250- P-0100; HO 250- P/SP606-1106; HO 250- P/SP33-1106; HO 77- P/SPH00 -0100; HO 77.1- P/SPH00-0100; HO 93- P/SPH00-0100; HO 116- P/SPH00 -0100; HO 125- P/SPH00 -0100; HO 154- P/SPH00… download now
2019_PCN-043_2019_4-OMTxxx.pdf download now
2019_PCN-043_2019_3-OMTxxx.pdf download now
2019_PCN-043_2019_2-OMTxxx.pdf PCN-043_2019_2 -OMT xxx Page 1/5 Product Change Notification Geneva, 08 th Octo ber 2019 PCN-0 43_2019_ 2-OMT xxx Packager supplier change for the SIL4 package of the ASIC HLSR, HASS, HFWS, HXS, HAIS, HAFS, HMS, 0165, 0173, 0187 series Additional update (SEE PAGE 5) Based on the JEDEC JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modifications on HLSR, HASS, HFWS, HXS, HAIS, HAFS, HMS, 0165, 0173, 0187 series. Concerned series: HLSR, HASS, HFWS, HXS, HAIS, HAFS, HMS, 0165, 0173, 0187 series PCN-043_2019_2 -OMT xxx Page 2/5 Change s: Description of the technical change s: Packager supplier change for the packaged SIL4 ASIC used inside the products. Design will be the same as before. The material used for the ASIC SIL 4 package from the new supplier will be the… download now
2019_PCN-043_2019_1-OMTxxx.pdf PCN - 04 3 _2019_ 1 - OMT xxx Page 1 / 4 Product Change Notification Geneva , 17 th September 2019 PCN - 0 4 3 _2019_ 1 - OMT xxx Packager supplier change for the SIL4 package of the ASIC HLSR, HASS, HFWS, HXS, HAIS, HAFS, HMS, 0165, 0173, 0187 series Qualification and test plans available Based on the JEDEC JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification s on HLSR, HASS, HFWS, HXS, HAIS, HAFS, HMS, 0165, 0173, 0187 series . Concerned series : HLSR, HASS, HFWS, HXS, HAIS, HAFS, HMS, 0165, 0173, 0187 series PCN - 04 3 _2019_ 1 - OMT xxx Page 2 / 4 Change s : ➢ Description of the technical change s : Packager supplier change for the packaged SIL4 ASIC used inside the products. Design will be the same as before. The material used for the ASIC SIL 4 package… download now
2019_PCN-043_2019_0-OMT.pdf PCN -043_2019_0 -OMT xxx Page 1/4 Product Change Notification Geneva , 07th August 2019 PCN n°: PCN -043 _2019_0 -OMT xxx Packager supplier change for the SIL4 package of the ASIC HLSR, HASS, HFWS, HXS, HAIS, HAFS, HMS, 0165, 0173, 0187 series Based on the JEDEC JESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification s on HLSR, HASS, HFWS, HXS, HAIS, HAFS, HMS, 0165, 0173, 0187 series . Concerned series : HLSR, HASS, HFWS, HXS, HAIS, HAFS, HMS, 0165, 0173, 0187 series PCN -043_2019_0 -OMT xxx Page 2/4 Change s: ➢ Description of the technical change s: Packager supplier change for the packaged SIL4 ASIC used inside the products. Design will be the same as before. The material used for the ASIC SIL 4 package from the new supplier will be the same as before for the… download now
2019_PCN-037_2017_1-OMTB1700901.pdf PCN-037_2017_1- OMTB1700901 Page 1/3 Product Change Notification Beijing, 21 st N ovember 201 9 PCN n°: PCN-0 37_2017 _1-OMT B17009 01 Spacer design upgrade HAT series – First date code HAT 1000-S Based on the JEDEC J ESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on H AT series. This letter is to notify you about our planned procedure to handle this change. Concerned products: HAT 163- S/SP6; HAT 163 -T/SP17; HAT 200- S; HAT 200- S/SP1; HAT 233- S/SP6; HAT 233 -T/SP17; HAT 320- S/SP6; HAT 320 -T/SP17; HAT 400- S; HAT 400- S/SP1; HAT 481- S/SP6; HAT 481 -T/SP17; HAT 500- S; HAT 500- S/SP1; HAT 500- S/SP24; HAT 500- S/SP105; HAT 600- S; HAT 600- S/SP1; HAT 600- S/SP100; HAT 728- S/SP6; HAT 728 -T/SP17; HAT 750- S; HAT 800- S; HAT 800- S/SP1; H AT 800… download now
2019_PCN-017_0-OMTB1905701.pdf PCN -017_2019_0- OMTB1905701 - 1 - Product Change Notification Beijing, 08 th March 2019 PCN n°: PCN-017 _2019_0-OMT B19057 01 Current consumption correction in d ata sheets H AT series Based on the JEDEC J ESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to proceed to some modification on H AT series . This letter is to notify you about our planned procedure to handle this change. Concerned products : HAT 1000- S; HAT 1000- S/SP1; HAT 1000- S/SP105; HAT 1000- S/SP18; HAT 1000- S/SP100; HAT 1000- S/SP24; HAT 1200- S; HAT 1200- S/SP1; H AT 1200-S/SP105; HAT 1500- S; HAT 1500- S/SP1; HAT 1500- S/SP105; HAT 1500- S/SP23; HAT 1500- S/SP24; HAT 1500- S/SP100; HAT 200- S; HAT 200- S/SP1; HAT 400- S; HAT 400- S/SP1; HAT 500- S; HAT 500- S/SP1; H AT 500 -S/SP105; HAT 500-S/SP24; HAT 600- S; HAT… download now
2019_PCN-01032019-NIDEC.pdf 1 / 6 To: Customers Date: 01.03.2019 Document No: PCN01032019 Nidec Copal Electronics GmbH Managing Director Ta da y u k i Ts u k a da PCN (Product Change Notice) of Logo/Marking Thank you very much for your business and your continuous support as always. We would like to inform you that we are planning to change ‘Logo’ and ‘Marking’ on our products. １．Products Potentiometers and Encoders (Please refer to the attached applicable series list.) ２．Changes Only ‘Logo’ or Marking on products. (No specification change) ３．Reason NIDEC-Group Compliance of Unified Logo/Marking ４．Date of change The change will start from March 01. 2019, at all times. For any questions, please feel free to contact our customer service/sales representative. Regards, Ta day u k i Ts u k a da Managing Director Phone: +49-6196-92775-0 Fax : +49-6196-92775-75 tsukada@nidec-copal-electronics.de NIDEC COPAL ELECTRONICS GmbH Mergenthalerallee 79-81 65760 Eschborn, Germany Handelsregister: Amtsgericht Frankfurt am Main… download now
2019_PCN-002_0-OMTB1828301.pdf PCN -002_2019_0 -OMTB1828301 - 1 - Product Change Notification Beijing , 21 st January 2019 PCN n°: PCN -00 2 _2019 _0 -OMT B1828 301 Internal cable s supplier LF 2000 and LF2005 series Based on the JEDEC J ESD46 standard (latest release) Not for publication unless permission is granted by LEM Dear customer, To answer to continuous market requirement for improved performances, and in a permanent effort to improve the quality of its products, LEM intends to procee d to some modification on LF 2000 and LF2005 series . This letter is to notify you about our planned procedure to handle this change. Concerned product s: LF 2000 -S/SP4; LF 2000 -S/SP5; LF 2005 -S/SP1; LF 2005 -S/SP13; LF 2005 -S/SP2; LF 2005 -S/SP27 ; LF 2005 -S/SP30; Change : Des cription of the technical change : Internal cable s supplier . This is concerning all the cables used inside the product to link the PCBA to connector. Data sheets for old and new cable references are available as annexed files. Reason of the… download now
2019_EOL-029_2013_3.pdf EOL-029_2013_3 - 1 End of Life Notification (EOL) Geneva, 05 th April 2019 EOL-029_2013_3 CT -P family - Extended deadlines To our Valued Customers and Partners, As part of our continued focus toward providing our customers and partners the highest level of service, quality and security, LEM International announces the End o f Life (“EOL”) of the below mentioned current transducers • Models that will be obsolete on 01 st April 2023: Deadlines for CT xxx-P models: Maintenance/Switch to D: 01 st April 2017 01 st April 2021 Last call orders: 01 st December 2018 01 st October 2022. After what any orders will be refused. Obsolescence: 01 st April 2019 01 st April 2023 • Reminder: Models that are already obsolete: LEM International will continue to support the repa ir of the concerned finished products. LEM International will repair defective items retur ned to LEM International and will invoice the custo mer at the prevailing rate for time and materials. LEM International will not be able… download now
2019_ECO_8TEQJ-0088_LP-S-Silver-Contacts-DiscontinuationNotice_201910_ENG.pdf To ECOMAL Europe GMBH Nov . 21st , 2019 Document Management Number 8TEQJ -00 88 Sato Manabu Product Engineering Department Manager E&MC Business Division NIDEC COPAL ELECTRONICS CO., LTD. Product Discontinuation Notice for Part s of the LP Series Dear all Best wishes and thank you for your continuous support. We are writing to inform you that we are going to discontinue the sales of illuminated pushbutton switch , LP Series (Silver contact) . Sorry for the inconvenience and hope for your understanding. With best regards 1. Products to be discontinued ・ LP Series （ Nonilluminated, silver contact s） ※ The switch with gold plated contact s will keep on selling ・ LP Series （ Illuminated, silver contact s） Code Cap color W 12mm×15.6mm 7 ON-ON 1 1 pole 2 2 poles Cap size Code Circuit Function S 12mm×12mm 6 ON-(ON) S Sliver G Gold plated Code Contact macterial Code Box & Terminal style 1 Without Flange & PC Terminal 2 With Flange & Solder terminal - Z Series code Code Poles 6 S - ＊ L P 1 S -… download now
2019_Customer-Notification_Withdrawal-of-PCN-CC-002-2018-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters: 63 Lancaster Avenue, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E OF TH E W OR LD ’S L AR GE S T M AN U F AC TU R E R S O F D IS C R E T E S E M IC ON D U C TOR S AN D P AS S IV E C OM P ON E N T S Product Group : Vis hay Ceramic Capacitors / October 01 , 201 9 Customer Notification Withdrawal of PCN -CC -002 -2018 Rev . 0 For technical reasons we have decided to withdraw the PCN -CC -002 -2018 Rev. 0 . All part numbers in above mentioned PCN keep the temperature characteristic T3M (N4700), as it is described in the catalogue . Please kindly consider above mentioned PCN as irrelevant. However, a s mentioned in the PCN, i n line with our commitment for co ntinuous improvement we will offer components build up with temperature characteristic S3L (N3300) with separate part number on request . ISSUED BY: Product Marketing Ceramic Capacitors Ralph Dietrich , Mgr. Product Marketing C eramic… download now
2019_Anschreiben_Verpackungsaenderung_SL_5_08_Part1.pdf download now
2019_Anschreiben_Ecomal_Verpackungsaenderung_SL_7_62_Part2.pdf download now
2019_Advisory Letter-TO-247AC_Packing-Tube-Change-at-GEM.pdf Advisory Letter Product Group: Vishay Siliconix/ Sep 19, 2019 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # SUBJECT: Introduction of an improved packing tube design affecting products in packageTO-247AC at GEM Electronics, Hefei, China Dear Valued Customer: This advisory is being provided to you as an announcement that we will introduce an improved packing tube design for TO-247AC package assembly at GEM Electronics, Hefei, China. Please refer to 2 nd page of this advisory letter for affected parts list. The new tube design (option 2) will be implemented starting from mid of November 2019 onwards. Old tube design availability (option 1) will depend on distribution inventory status after mid of November 2019.… download now
2019_Abkündigung- LPx_N_R_5__0x.pdf download now
2019_Abkündigung- LPx_N_R_5__0x.pdf download now
2019_8TEQJ-0010_CUS_CSS.pdf 1 / 2 Date: January 30th 2019 Document No: 8TEQJ-00 10 Nidec copal electronics corporation Business Operation Division E&MC Division Product E ngineering Department Manager Manabu Sato Abo ut production factory change Thank you for your continuous help and support as always. We are pleased to announce that we will change the production location, marking method and grease as follows for the slide switch which we are currently delivering to your c o m p a n y. １． Product subject Slide switch es CUS, CSS series ２． Changes ①． Production location change ＣＵＳ series 、ＣＳＳ series ②．Marking method ＣＵＳ series When changing the production location, CUS series will be changed from ink marking to laser marking.CSS series will continue ink marking . Current production location Production location after transfer Production location Zhuhai City, Guangdong Province , China Va n Lam City, Tin h Hung Yen Province,Vietnam Example of ink marking Example of laser marking 2 / 2 ③．Grease change ＣＵＳ、ＣＳＳ series… download now
2019_8TEQJ-0006.pdf 1 / 2 Date: January 30th 2019 Document No: 8TEQJ-000 6 Nidec copal electronics corporation Business Operation Division E&MC Division Product E ngineering Department Manag er Manabu Sato Notice of change packing material s reel color Thank you for your continuous help and support as always. We would like to inform you that we are planning change the color of packing material of the following products. １． Product subject （Par t of a series of reel packing products ） Please refer to the attached applicable series list . ２． Changes Change reel color from white to black. Before （white ） After （black ） ※ The above picture is an example ・There is no reel material change. No content s change in the delivery specification for each product. ３． Change reason Internal standardizing. ４． Date of change The change will start from April 2019. For any q uestion please feel fr ee to contact our sales representative. 2 / 2 Applicable series list No. Category Series name No. Category Series name 1 Trimmer… download now
2019-PCN15_Additional-Assembly-Site-Notification.pdf Product Change Notification Doc#: QF - 01 6 Rev. A Confidential Date Printed: 8/21/2019 Page 1 of 2 Printed Copies of This Documen t are Uncontrolled PCN number assigned by Quality PCN # 15 PCN Date 8 - 30 - 19 UnitedSiC Information Initiator Mari - Anne Gagliardi Implementation Date 01 - 01 - 2020 PCN Information Customer Approval Required Notification Only Type of Ch ange: Major Minor Obsolescence Change Affects Form Fit Function Reliability N/A The following applies to all change classifications (Major, Minor, Obsolescence ) Description of Change : Approval of addition al supplier for MOSFET to carrier sub - assembly used in SiC FE Ts products Reason for Change : Increased capacity and flexibility, reduced cycle time . Affected Products : All UJ 3C, UF3C SiC FET Products The following only applies to Major and Minor C h anges Affected Product Specification (if applicable) : Detail of potential impact to customer: Qualification Plan or Data (if applicable) : Customer Samples… download now
2019-PCN-SIL-007-ASE-TO-220-Mold -ompound-Change.pdf Product Group: Vishay Siliconix/ August 30, 2019/PCN SIL-0072019 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # Vishay Siliconix Announces the Qualification New Green Mold Compound for Commercial High Voltage MOSFETs Built in TO-220 Packages DESCRIPTION OF CHANGE: As part of our continuous improvement program, Vishay Siliconix announces the qualification of SUMITOMO E590HT Green Mold Compound for TO-220 packages assembled in ASE Weihai, China (ASE) for Vishay’s High Voltage MOSFET (HVM) products. CLASSIFICATION OF CHANGE: Material set conversion REASON FOR CHANGE: Part of continuous improvement program . EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: Enhancement to long-term product reliability. No changes… download now
2019-PCN-SIL-007-ASE-TO-220-Mold-Compound-Change.pdf Product Group: Vishay Siliconix/ August 30, 2019/PCN SIL-0072019 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # Vishay Siliconix Announces the Qualification New Green Mold Compound for Commercial High Voltage MOSFETs Built in TO-220 Packages DESCRIPTION OF CHANGE: As part of our continuous improvement program, Vishay Siliconix announces the qualification of SUMITOMO E590HT Green Mold Compound for TO-220 packages assembled in ASE Weihai, China (ASE) for Vishay’s High Voltage MOSFET (HVM) products. CLASSIFICATION OF CHANGE: Material set conversion REASON FOR CHANGE: Part of continuous improvement program . EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: Enhancement to long-term product reliability. No changes… download now
2019-PCN-DD-017- Rev 0.pdf 1/2 Product Group: Diodes Division / August 1 6, 201 9 / PCN -DD -017 -20 19 Rev. 0 Manufacturing Location Change for Commercial G rade of GF1 (DO -214BA) Package DESCRIPTION OF CHANGE : Vishay Diodes Division is transfer ring the assembly & final test of commercial grade products in GF1 (DO -214BA) package from Vishay Taipei , Taiwan factory to Vishay Xi’an , China factory . All material s & process are kept the same in the current production in Taipei . There is no change in form, fit and function of the device s in customer application s, except label size as explained in the table below. Item Before After Assembly Site Vishay Taipei, Taiwan Vishay Xi'an , China Label Size 2D: 7.6 x 3.8 cm 1D: 4.5 x 2.5 cm 2D: 8.0 x 4.0 cm 1D: 6.0 x 3.0 cm 2D Label 1D Label CLASSIFICATION OF CHANGE: Assembly Site REASON FOR CHANGE: Production line consolidation EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: No change in quality, reliability and performance PRODUCT CATEGORY: Rectifier PART… download now
2019-PCN-DD-013-Rev 0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T P roduct Obsolescence DESCRIPTION OF CHANGE: Vishay Semiconductor announces the discontinuation of some power module part numbers without replacement. CLASSIFICATION OF CHANGE: Product Obsolescence REASON FOR CHANGE: Discontinued supply of IGBT dice EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N/A PRODUCT CAT EGORY: Modules PART NUMBERS/SERIES/FAMILIES AFFECTED: Obsolete Part Number Replacement Part Number VS -ETF150Y65U NA VS -GA200TH60S NA VS -GB100TH120U NA VS -GB100TS120NPBF NA VS -GB100TS60NPBF NA VS -GB150TS60NPBF NA VS -GB200TS60NPBF NA VS -GB300TH120U NA VS -GB400AH120U NA VS -GB400TH120U NA VS -GB75TP120U NA VS -GT120DA65U NA VS -GT50TP120N NA VS -GT50TP60N… download now
2019 PTN-NLR-003- Withdrawal of MCT series curve 7 Rev1.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355- 2143 U.S.A. Phone (610) 644- 1300 Fax (610) 296- 0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONEN T MKT010 - 06 Withdrawal of M,C,T series Curve 7 DESCRIPTION OF CHANGE: Vishay has the intention to withdraw all parts of M,C,T series curve 7 CLASSIFICATION OF CHANGE: Product Obsolescence REASON FOR CHANGE: Lack of market demand and the obsolescence of the ceramic raw material EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: Not applicable PROD UCT CATEGORY: Resistors, Non -Linear , Thermistors PART NUMBERS/SERIES/FAMILIES AFFECTED: 07B* 07C* 07M* 07T* 07W * C07* M07* T07* A3101P, A3084P, A3085P, A3086P, A3087P, A3121P VISHAY BRAND(s): Vishay Dale TIME SCHEDULE: Las t Time Buy Date: November 1 st 2019 Last Tim e Shipment Date: December 31 st 20 19 SAMPLE AVAILABILITY: Not applicable PRODUCT IDENTIFICATION: Not applicable… download now
2019 PCN SIL-007-Rev1.pdf Product Group: Vishay Siliconix/ August 30, 2019/PCN SIL-0072019 Rev1 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # Vishay Siliconix Announces the Qualification New Green Mold Compound for Commercial High Voltage MOSFETs Built in TO-220 Packages DESCRIPTION OF CHANGE: As part of our continuous improvement program, Vishay Siliconix announces the qualification of SUMITOMO E590HT Green Mold Compound for TO-220 packages assembled in ASE Weihai, China (ASE) for Vishay’s High Voltage MOSFET (HVM) products. CLASSIFICATION OF CHANGE: Material set conversion REASON FOR CHANGE: Part of continuous improvement program . EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: Enhancement to long-term product reliability. No… download now
2019 PCN-OMV-1099-Rev0.pdf Product Change Notification Product Group: Opto Modules & Visibles 29-OCT-2019 / PCN OMV-1099-2019 Rev. 0 TITLE: Change of Lens Radius for VLMU3500-xxx-120 device series A new molding tool will be required for VLMU3500-xx x-120* series. With the new tool, the lens radius changes from 1.35mm to 1. 53mm. Total height changes from 2.0mm to 2.22mm. Other specifications remain unchanged. DESCRIPTION OF CHANGE: Form Fit Function CLASSIFICATION OF CHANGE : Standardization of molding Tools. REASON FOR CHANGE : There is no influence on quality, reliability and p erformance. EXPECTED INFLUENCE ON QUALITY RELIABILITY / PERFORMANCE: LEDs PRODUCT CATEGORY : PART NUMBERS / SERIES / FAMILIES AFFECTED: VLMU3500-385-120 VLMU3500-395-120 VLMU3500-405-120 VLMU3500-385-120-L VLMU3500-395-120-L VLMU3500-405-120-L VISHAY SEMICONDUCTORS VISHAY BRAND(s) : TIME SCHEDULE: Annotations about time schedule: Start Shipment Date: 30-DEC-2019 Date Code WW01/2020 QUALIFICATION DATA : This PCN is considered approved,… download now
2019 PCN-OMV-1085-Rev0.pdf Product Change Notification Product Group:Opto Modules & Visibles 12-AUG-2019 / PCN OMV-1085-2019 Rev. 0 TITLE: Change maximum dominant wavelength for 5mm red LED series TLHR5... / TLHR6... from 625nm to 630nm Change of maximum limit for dominant wavelength fro m 625nm to 630nm in the datasheets for the 5mm red LED series TLHR5... and TLHR6... DESCRIPTION OF CHANGE: Test Process CLASSIFICATION OF CHANGE : Alignment of datasheet specification and emitter ch ip specification. REASON FOR CHANGE : There is no change in the actual product other than the dominant wavelength specification. Reliability and performance will not be affected. EXPECTED INFLUENCE ON QUALITY RELIABILITY / PERFORMANCE: LEDs PRODUCT CATEGORY : PART NUMBERS / SERIES / FAMILIES AFFECTED: LEDs / TLHR5... and TLHR6... / 5mm Red LED series VISHAY SEMICONDUCTORS VISHAY BRAND(s) : TIME SCHEDULE: Annotations about time schedule: Start Shipment Date: 04-NOV-2019 SAMPLES AVAILABLE BEGINNING : 19-AUG-2019 We need samples for… download now
2018_PTN-TC-008-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355- 2143 U.S.A. Phone (610) 644- 1300 Fax (610) 296- 0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Discontinuation of series: MC2 DESCRIPTION OF CHANGE: Vishay will discontinue production of M C2 series CLASSIFICATION OF CHANGE: Product termination REASON FOR CHANGE: The cost of dedicating and maintaining these product styles /series is no longer cost effective based on market demand. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N/A PRODUCT CATAGORY: Wet Tantalum Capacitor, Button PART NUMBERS/SERIES/FAMILIES AFFECTED: all CA2 and CE2 part numbers. See attached listing. VISHAY BRAN D(s): VISHAY TANSITOR TIME SCHEDULE: Last Time Buy Date: February 1, 2019 Last Time Shipment Date: July 31, 2019 SAMPLE AVAILABILITY: N/A PRODUCT IDENTIFICATION: N/A QUALIFICATION DATA: N/A This P TN is considered approved, without further… download now
2018_PTN-TC-007-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355- 2143 U.S.A. Phone (610) 644- 1300 Fax (610) 296- 0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Discontinuation of series: CA2 and CE2 DESCRIPTION OF CHANGE: Vishay will discontinue production of CA2 and CE2 series CLASSIFICATION OF CHANGE: Product termination REASON FOR CHANGE: The cost of dedicating and maintaining these product styles /ser ies is no longer cost effective based on market demand. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N/A PRODUCT CATAGORY: Wet Tantalum Capacitor, Button PART NUMBERS/SERIES/FAMILIES AFFECTED: all CA2 and CE2 part numbers. See attached listi ng. VISHAY BRAND(s): VISHAY TANSITOR TIME SCHEDULE: Last Time Buy Date: February 1, 2019 Last Time Shipment Date: July 31, 2019 SAMPLE AVAILABILITY: N/A PRODUCT IDENTIFICATION: N/A QUALIFICATION DATA: N/A This P TN is considered approved, without… download now
2018_PTN-TC-005-Rev0.pdf Discontinuation of Wet Tantalum Capacitors Silver Case with Glass -to - Metal Hermetic Seal, CT9 style DESCRIPTION OF CHANGE : Vishay will discontinue all capacitors production of Wet Tantalum Capacitors of CT9 style , all case sizes. CLASSIFICATION OF CHANGE: Discontinue all part numbers for Product Series CT9 REASON FOR CHANGE: The ongoing sales of these technology products has declined. The cost of dedicating and maintaining this product line is no longer cost effective based on market demand. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: None PRODUCT CATAGORY: Wet Tantalum Capacitors Silver Case PART NUMBERS/SERIES/FAMILIES AFFECTED: CT9 series, all case sizes, all part numbers. VISHAY BRAND(s): VISHAY SPRAGUE TIME SCHEDULE: Last Time Buy Date 20Jul 2018 Last Time Shipment Date: : 20 Jan, 2019 SAMPLE AVAILABILITY: N/A. PRODUCT IDENTIFICATION: N/A. QUALIFICATION DATA: N/A. This P TN is considered approved, without further notification, unless we receive specific customer… download now
2018_PTN-OMV-1043-Rev0.pdf Product Termination Notification Product Group: Opto Modules & Visibles 11-SEP-2018 / PTN OMV-1043-2018 Rev. 0 TITLE: Obsolescence of optocoupler 6N138 Series products Due to the declining demand, Vishay, is announcing that the product listed here have reached their end of life and activities have started to cease production on an ordered fashion. DESCRIPTION OF CHANGE: Product Obsolescence CLASSIFICATION OF CHANGE : The declining demand for these products in the mark et along with the obsolescence of the detector chip by our current su pplier makes this series no longer feasible to manufacture. REASON FOR CHANGE : Optocouplers, Isolators PRODUCT CATEGORY : PART NUMBERS / SERIES / FAMILIES AFFECTED: This PCN impacts the 6N138 product series. The prod ucts are: 6N138 Series: 6N138, 6N138-X007,6N138-X007T,6N138-X009,6N138-X009 T VISHAY SEMICONDUCTORS VISHAY BRAND(s) : TIME SCHEDULE:Annotations about time schedule: Last Time Buy Date: 12-MAR-2019 Last Time Shipment Date: 10-SEP-2019… download now
2018_PTN-OMV-1013-2018-Rev0.pdf Product Termination Notification Product Group: Opto Modules & Visibles 05-MAR-2018 / PTN OMV-1013-2018 Rev. 0 TITLE: Product Discontinuation of no Running Visible Parts Product discontinuation. Phase out of products rele ased before 2016 and with no sales for more than 2 years. DESCRIPTION OF CHANGE: Product Obsolescence CLASSIFICATION OF CHANGE : Product discontinuation due to no Business last 2 y ears REASON FOR CHANGE : LEDs PRODUCT CATEGORY : PART NUMBERS / SERIES / FAMILIES AFFECTED: according attached part number list VISHAY SEMICONDUCTORS VISHAY BRAND(s) : TIME SCHEDULE: Annotations about time schedule: Last Time Buy Date: 21-FEB-2018 Last Time Shipment Date: 21-FEB-2018 SAMPLES AVAILABLE BEGINNING : We need samples of replacement parts for evaluation: Yes No If Yes return this form to contact information belo w. This PCN is considered approved, without further no tification, unless we receive specific customer concerns before: 23-FEB-2018 or as specified by contract. ISSUED… download now
2018_PTN-NLR-004-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355- 2143 U.S.A. Phone (610) 644- 1300 Fax (610) 296- 0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONEN T MKT010 - 06 Withdrawal of PTCS sensing products series DESCRIPTION OF CHANGE: Vishay has the intention to withdraw PTCS sensing products using square chips. Customers using t he PTCSL20 or PTCSL40 products can replace these by the PTCSL03* series. CLASSIFICATION OF CHANGE: Product Obsolescence REASON FOR CHANGE: Lack of market demand. EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: Not applicable PRODUCT CATEGORY: Resistors, Non -Linear , Thermistors PART NUMBERS/SERIES/FAMILIES AFFECTED: PTCSGM* (Assembly PTC Lug type) PTCSSCW* (Assembly PTC Screw type) PTCSSLV* (Assembly PTC Sleeve type) PTCSC17* (Sensing PTC chip 1.7mm type) PTCSL20* (Sensing PTC leaded 20 mm type) PTCSL40* (Sensing PTC leaded 40 mm type) VISHAY BRAND(s): Vishay… download now
2018_PTN-MLC-00015-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644-1300 Fax (610) 296- 0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONEN T Product Group: Vishay Division MLCC/Nov . 21 2018/ PTN -MLC -00015- 2018 Rev 0 Discontinuation MLCC Chip Array VJ 06C4....W1BC DESCRIPTION OF CHANGE: Discontinuation of VJ 06C4....W 1BC MLCC Chi p Array Series. CLASSIFICATION OF CHANGE: Product Termination REASON FOR CHANGE: In order to maximize MLCC production efficiency and enhance production f lexibility , it was decided to phase out all VJ06C4.…W 1BC MLCC Chip Arrays. EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: N/A PRODUCT CATEGORY: Capacitors PART NUMBERS/SERIES/FAMILIES AFFECTED: Series Vishay Basic Commodity VJ06C4…W1BC , detail PNs attached. VISHAY BRAND(s): Vishay TIME SCHEDULE : Last Time Buy Date: April 21 th, 2019 Last Time Shipment Date: November 2 1 th, 2019 SAMPLE… download now
2018_PTN-MLC-00010-Rev0.pdf Product Group: Vishay Division MLCC/ Sept. 3rd 2018 / PTN-MLC-00010-2018 Rev 0 End of Life for Vitramon High Q Series DESCRIPTION OF CHANGE: Surface Mount Multilayer Ceramic Chip Capacitors with “Q” dielectric are being withdrawn in order to consolidate Product offering. CLASSIFICATION OF CHANGE: Product Termination REASON FOR CHANGE: These MLCCs will be merged to HiFREQ Series. Suggested replacement, VJ0603Dxxxxxx and VJ0805Dxxxxxx (Data Sheet: http://www.vishay.com/capacitors/list/product-45071/ ) EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: None PRODUCT CATEGORY: Capacitors PART NUMBERS/SERIES/FAMILIES AFFECTED: Attached PN listing. VJxxxxQ… Datasheet: http://www.vishay.com/docs/45050/highq.pdf VISHAY BRAND(s): Vishay TIME SCHEDULE: Last Time Buy Date: March 3 rd , 2019 Last Time Shipment Date: Sept. 3 rd ,2019 SAMPLE AVAILABILITY: N/A PRODUCT IDENTIFICATION: N/A QUALIFICATION DATA: N/A This PTN is considered approved, without further notification, unless we receive… download now
2018_PTN-MLC-00008-2018-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644-1300 Fax (610) 296- 0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONEN T Product Group: Vishay Division MLCC/June 8 th 2018 /P TN -MLC -00008- 2018 Rev 0 Change of available VJ….W1BC Y5V Hi -Cap ratings DESCRIPTION OF CHANGE: Several ratings from Y5V from VJ..W1BC series are removed. CLASSIFICATION OF CHANGE: Product Termination REASON FOR CHANGE: In order to maximize MLCC production efficiency and enhance production f lexibility , it was decided to phase out partial Y5V items. EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: N/A PRODUCT CATEGORY: Capacitors PART NUMBERS/SERIES/FAMILIES AFFECTED: Series Vishay Basic Commodity VJ…. W1BC , detail PNs attached. VISHAY BRAND(s): Vishay TIME SCHEDULE: Last Time Buy Date: Dec. 8 th 2018 Last Time Shipment Date: June 8 th, 2019 SAMPLE AVAILABILITY: N/A PRODUCT… download now
2018_PTN-FC-005-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355- 2143 U.S.A. Phone (610) 644-1300 Fax (610) 296 -065 7 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Product Group: Film Capacitors/ April 13 th 2018 /PTN -FC -005- 2018 Rev 0 Terminati on of Series MK P1844 DESCRIPTION OF CHANGE: This PTN informs the termination of legacy AC Filtering series , with the purpose of streamlining film capacitors portfolio. CLASSIFICATION OF CHANGE: Product Termination REASON FOR CHANGE: Streamline Portfolio EXPECTED INFLUENCE ON QUA LITY/RELIABILITY/PERFORMANCE: Not Applicable PRODUCT CATEGORY: Film Capacitors PART NUMBERS/SERIES/FAMILIES AFFECTED: Affected Part numbers start with MKP1844 xxxxxx. Series MKP1847H can be used as alternative. VISHAY BRAND(s): Roederstein TIME SCHEDULE: Last Time Buy Date: 13/10 /2018 Last Time Shipment Date: 13/10/2019 This PTN is considered approved, without further… download now
2018_PTN-FC-004-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355- 2143 U.S.A. Phone (610) 644-1300 Fax (610) 296 -065 7 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Product Group: Film Capacitors/ April 13 h 2018 /PTN -FC -004- 2018 Rev 0 Terminati on of Series MK P1846 DESCRIPTION OF CHANGE: This PTN informs the termination of legacy AC&Pulse series , with the purpose of streamlining film capacitors portfolio. CLASSIFICATION OF CHANGE: Product Termination REASON FOR CHANGE: Streamline Portfolio EXPECTED INFLUENCE ON QUA LITY/RELIABILITY/PERFORMANCE: Not Applicable PRODUCT CATEGORY: Film Capacitors PART NUMBERS/SERIES/FAMILIES AFFECTED: Affected Part numbers start with MKP1846xxxxxx. Series MMKP383 can be used as alternative. VISHAY BRAND(s): Roederstein TIME SCHEDULE: Last Time Buy Date: 13/10/2019 Last Time Shipment Date: 13/10/2019 This PTN is considered approved, without further notification,… download now
2018_PTN-FC-002-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355- 2143 U.S.A. Phone (610) 644-1300 Fax (610) 296 -065 7 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Product Group: Film Capacitors/ April 13 th 2018 /PTN -FC -002- 2018 Rev 0 Terminati on of Series MKT 332 DESCRIPTION OF CHANGE: T his PTN informs the termination of legacy Lacquered series , with the purpose of streamlining film capacitors portfolio. CLASSIFICATION OF CHANGE: Product Termination REASON FOR CHANGE: Streamline Portfolio EXPECTED INFLUENCE ON QUA LITY/RELIABILITY/PERFORMANCE: Not Applicable PRODUCT CATEGORY: Film Capacitors PART NUMBERS/SERIES/FAMILIES AFFECTED: Affected Part numbers start with BFC2332xxxxx . As a replacement, series MKT334 is suggested . VISHAY BRAND(s): BCComponents TIME SCHEDULE: Last Time Buy Date: 13/10 /2018 Last Time Shipment Date: 13/10/2019 This PTN is considered approved, without further… download now
2018_PTN-DR-00011-Rev0.pdf Product Group: Dale Resistors / June 25 , 2018 / PTN -DR -00011 -2018 , Rev 0 CCF50 and FRJ50 Product Termination DESCRIPTION OF CHANGE: Due to low demand for the axial -leaded Metal Film CCF50 Resistors and FRJ50 J umpers, these products will be discontinued. CLASSIFICATION OF CHANGE: Product Obsolescence REASON FOR CHANGE: Market for the CCF -50 and FRJ -50 products have become too small to continue production . EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: End -Of -Life . PRODUCT CATEGORY: Resistors PART NUMBERS/SERIES/FAMILIES AFFECTED: All Global (SAP) part numbers beginning with CCF50* and FRJ50* . The attached cross -reference file shows alternate products that could be used; and a comparison of the dimensional and electrical characteristics . VISHAY BRAND(s): Vishay Dale TIME SCHEDULE : Last Time Buy Date: December 31 , 201 8. Last Time Shipment Date: June 25 , 201 9 SAMPLE AVAILABIL ITY: Sample of our alternative styles are currently available PRODUCT IDENTIFICATION:… download now
2018_PTN-DD-S06-Rev0.pdf Product Discontinuance Notice of Rectifier Products DESCRIPTION OF CHANGE: Vishay Semiconductors announces the LTB and the LTS date s for Obsolete Part Number s involved in PCN s DD -001 -2018, DD -002 -2018 & DD -007 -2018. Corresponding Replacement Part Numbers can be found in the Part Number List. CLASSIFICATION OF CHANGE: Product Obsolescence REASON FOR CHANGE: Rationalization of product nomenclature and product portfolio EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: There will be no effect on quality, reliability or electrical/thermal perfomances. PRODUCT CATE GORY: Diodes & Rectifiers PART NU MBERS/SERIES/FAMILIES AFFECTED: Involved Part N umber s are listed below . PCN DD -001 -2018 VS -15ETH03SPBF VS -8ETL06STRRPBF VS -8ETL06 -1PBF VS -HFA25TB60SPBF VS -15ETH03STRLPBF VS -8ETU04SPBF VS -8ETU04 -1PBF VS -HFA25TB60STRLP VS -15ETH03STRRPBF VS -8ETU04STRLPBF VS -8ETX06 -1PBF VS -HFA25TB60STRRP VS -15ETH06SPBF VS -8ETU04STRRPBF VS -MURB1020CT -1PBF VS -HFA30TA60CSPBF VS… download now
2018_PTN-DD-020-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Product Discontinuance N otice of D -61 Part Numbers DESCRIPTION OF CHANGE: Vishay Semiconductor announces the d iscontinuation of Part N umbers in D-61 package. CLASSIFICATION OF CHANGE: Product Obsolescence REASON FOR CHANGE: Low production volume EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N/A PRODUCT CATE GORY: Diodes & Rectifiers PART NU MBERS/SERIES/FAMILIES AFFECTED: Obsolete Part N umber Obsolete Part N umber Obsolete Part N umber VS -110CNQ045APBF VS -80CNQ045APBF VS -85CNQ015APBF VS -110CNQ045ASLPBF VS -80CNQ045ASLPBF VS -85CNQ015ASLPBF VS -110CNQ045ASMPBF VS -80CNQ045ASMPBF VS -85CNQ015ASMPBF VS -111CNQ045APBF VS -81CNQ035APBF VS -87CNQ020APBF VS… download now
2018_PTN-DD-003-Rev0.pdf Product Discontinuance Notice of Rectifier Products DESCRIPTION OF CHANGE: In order t o harmonize the product portfolio , Vishay Semiconductor announce s the discontinuation, with replacement , of some commercial TO -263AB (D 2PAK), TO -262 AA , TO -220 , TO -220FullPAK and TO -247 Part Numbers. CLASSIFICATION OF CHANGE: Product Obsolescence REASON FOR CHANGE: Rationalization of product nomenclature and product portfolio EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: There will be no effect on quality, reliability or electrical/thermal perfomances. PRODUCT CATE GORY: Diodes & Rectifiers PART NU MBERS/SERIES/FAMILIES AFFECTED: Involved Part N umber s as well as alternative equivalent Part N umbers are listed below . TO -220 Family Obsolete Part Number Alternative Equivalent Part Number Datasheet FRED VS -15ETH03 -N3 VS -15ETH03 -M3 96181 FRED VS -15ETH06 -N3 VS -15ETH06 -M3 96174 FRED VS -15ETL06 -N3 VS -15ETL06 -M3 96175 FRED VS -15ETU12 -N3 VS -15ETU12 -M3 96207 FRED VS… download now
2018_PTN-DBR-002-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lancaster Avenue, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Withdrawal of OCT 0603, OCU 0805 DESCRIPTION OF CHANGE: Vishay has the intention to withdraw OCT 0603, OCU 0805 CLASSIFICATION OF CHANGE: Product obsolescence REASON FOR CHANGE: Lack of market demand. EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: Not applicable PRODUCT CATEGORY: Resistors, Discrete PART NUMBERS/SERIES/FAMILIES AFFECTED: OCT06030BxxxxJP500 OCT06030WxxxxJP500 OCU08050BxxxxJP500 OCU08050WxxxxJP500 REPLACEMENTS: CRCW0603-HR, CRCW0805-HR VISHAY BRAND(s): Vishay Beyschlag TIME SCHEDULE: Last Time Buy Date: December 20 th 2018 please note that orders are non-cancelable / non-returnable Last Time Shipment Date: June 20 th 2019 SAMPLE AVAILABILITY: Not applicable PRODUCT IDENTIFICATION: Not applicable QUALIFICATION DATA: Not… download now
2018_PTN-DBR-00009-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lancaster Avenue, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Discontinuation of Thick Film Chip Resistor Array Series CRA D ESCRIPTION OF CHANGE: Discontinuation of Thick Film Chip Resistor Array CRA (all series, all sizes). CLASSIFICATION OF CHANGE: Product obsolescence REASON FOR CHANGE: Increasing processability requirements do not enable us to improve the current products. EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: Not applicable PRODUCT CATEGORY: Resistors PART NUMBERS/SERIES/FAMILIES AFFECTED: CRA04S; CRA06E, CRA06S; CRA12E, CRA12S; CRA04P; CRA06P; CRAS0606; CRAS0612; CRAE0612 REPLACEMENTS: not applicable VISHAY BRAND(s): Vishay TIME SCHEDULE: Start Shipment Date: --- Last Time Buy Date: December 31 st, 2019 Last Time Shipment Date: June 30 th, 2020 SAMPLE AVAILABILITY: Not applicable… download now
2018_PTN-AC-00003-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquart ers 63 Lincoln Highway, Malvern, PA 19355 - 2143 U.S.A. Phone (610) 644 - 1300 Fax (610) 296 - 0657 www.vishay.com O N E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T End of Life MAL219390008E3 DESCRIPTION OF CHANGE: Stop of production of MAL219390008E3 CLASSIFICATION OF CHANGE: Product Termination REASON FOR CHANGE: Low demand EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: NA PRODUCT CATEGORY: Capacitors PART NUMBERS/SERIES/FAMILIES AFFECTED: MAL219390008E3 VISHAY BRAND(s): Vishay BCcomponents TIME SCHEDULE: Last Time Buy Date: June 11, 2019 Last Time Shipment Date: December 11, 2019 SAMPLE AVAILABILITY: NA PRODUCT IDENTIFICATION: NA QUALIFICATION DATA: NA This PTN is considered approved, without further notification, unless we receive specific customer concerns before Jan. 15, 2019 or as specified by contract. ISSUED BY: Theo… download now
2018_Process_PCN_Relocation_Ecomal.pdf Piher Sensors & Controls SA Pol ίgono Industrial Municipal, Vial T2, No 22, 31500 Tudela, Navarra, Spain Piher is an Amphenol TM company. RM Navarra Tomo 551, Folio 7, Hoja 5.580 CIF/VAT ESA31169907 Tel: +34 948 820 450 Fax: +34 948 824 050 www.piher.net Page 1 of 6 Process/Product Change Notice Description and reason for the change: Last summer 2017, we were delighted to draw your attention to the acquisition of Piher by Amphenol, the global producer of electronic and fiber optic connectors, cable, se nsors and interconnect systems. We are now completing the integration plan by moving our China manufacturing activities from Xiamen to Amphenol Changzhou Connector Systems Co., Ltd. (ACCS) facility wholly owned by Amphenol. ACCS operates with the highest quality standards such as ISO 9001, ISO 14001 and ISO TS 16949. We look forward to starting operations in this state -of-the -art site which is perfect to accommodate our current operations in Asia and expectations for growth. Our… download now
2018_PCN_PI-E3040.pdf PCN - Product Change Notification No.: Date: Originator: Subject: Related product: Should you have any issues within this PCN, please contact us within the next 30 days. No response will be deemed as your acceptance. PI-E3040 21.03.2018 Andrea Schaffarczyk product change Vinyl-insulated terminals Vinyl-insulated terminals as per file enclosed Since Diethylhexyl phthalate (DEHP) is used to the insulation cap of Vinyl-insulated terminals as plasticizer, these products are not RoHS II (10 substances) compliance. The insulation cover of Vinyl-insulated terminals shall be changed from RoHS II substances containing products to the non-component products. However, the products with transparent insulation cover cannot be changed. Please consider that the products with transparent insulation cover shall be changed to the other colored Vinyl-insulated terminal, Nylon- insulated terminal, or Non-insulated terminal. Description of change: Identification of change: Reason of change: In order to… download now
2018_PCN_PI-E3025.pdf PCN - Product Change Notification No.: Date: Originator: Subject: Related product:PI-E3025 12.12.2017 B. Meier Insulated solderless terminal (GS terminal) see Excel list Additional production and shipping plant Description of change: JST Deutschland GmbH Küferstr. 15 D-73650 Winterbach Phone: +49/7181/4007-0 FAX: +49/7181/4007-21 e-mail: customer.service@jst.de www.jst.de register court: Amtsgericht Stuttgart HRB 280991 CEO: Masao Yoshimura Should you have any issues within this PCN, please contact us within the next 30 days. No response will be deemed as your acceptance. Schedule: step by step Identification of change: JST Deutschland GmbH Küferstr. 15 D-73650 Winterbach Phone: +49/7181/4007-0 FAX: +49/7181/4007-21 e-mail: customer.service@jst.de www.jst.de register court: Amtsgericht Stuttgart HRB 280991 CEO: Masao Yoshimura download now
2018_PCN_Ecomal_Push-Button-Optimization.pdf download now
2018_PCN_DBR_00003_Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT WSZ6720: Capacity expansion DESCRIPTION OF CHANGE: Production capacity of WSZ6720 surface mount, cement coated wire wound resistors is being expanded by starting production in Loni, India factory, in addition to its current production location at Sokolov, CZ. Minor visual changes may occur in the product and the packing material. CLASSIFICATION OF CHANGE: Manufacturing location REASON FOR CHANGE: Due to increasing business volumes, WSZ6720 will also be manufactured in India. New location, Loni, India, has long experience in producing axial leaded wire wound resistors and can easily adapt production of WSZ6720 which is a surface mount variant of axial leaded resistors. The plant is ISO 9001:2008; ISO/TS 16949:2009; ISO 14001:2004 and BS OHSAS… download now
2018_PCN SF-204-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # MCB FIXED RESIST ORS RCEC 250 , RCEC 500, RCEC 750, RCMC New Marking on Clamp (accessory) DESCRIPTION OF CHANGE: In line with our commitment for continuous improvement, Vishay MCB is implementing a new Marking for RCEC Clamp when delivered as accessory . Old marking was ink stamping. New parts will be marked with Laser. All other products specifications remain unchanged. CLASSIFICATION OF CHANGE: Marking REASON FOR CHANGE: Product Improvement EXPECTED INFLUENCE ON QUALITY / RELIABILTY / PERFORMANC E: none PRODUCT CATE GORY: Fixed Resistor, PART NU MBERS/SERIES/FAMILIES AFFECTED: RCEC RCMC (see affected P/Ns below (annex 1 ) VISHAY BRAND(s): VISHAY SFERNICE MCB TIME… download now
2018_PCN-TF-005-Rev0.pdf Product Group: Thin Film / September 17 , 2018 / PCN -TF -00 5-2018 Rev 0 PNM – Precision Thin Film Non -Magnetic Resistor Surface Mount Chip DESCRIPTION OF CHANGE: Vishay Dale Thin Film is replacing the electroless nickel barrier layer with copper in the termination (no change to solder composition) and implementing the use of a new mechanical protective layer on its’ PNM non -magnetic chip resistor product lin e. The new mechanical protective layer is the same material used on Vishay Thin Film’s established reliability, E/H military qualified product. Product will continue to ship with the existing termination and mechanical protective layer until existing inventory is depleted. Comparison in the change of the mechanical protective layer: PTN2512 - New Mechanical Protective Layer PTN2512 - Previous Mechanical Protective Layer Dark Green Opaque Dark Green Translucent CLASSIFICATION OF CHANGE: Material Change REASON FOR CHANGE: Changes will improve manufacturability and reliability.… download now
2018_PCN-TC-014-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355- 2143 U.S.A. Phone (610) 644- 1300 Fax (610) 296- 0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASS IVE COMPONENT Change of Moisture-Sensitive Identification (MSID) label DE SCRIPTION OF CHANGE: Vishay has the intention to change Moisture- Sensitive Identification (MSID) label for Moisture and Process Sensitive Devices in accordance with IPC/JEDEC J-STD -033D standar d and as indicated in appendix 1. C LASSIFICATION OF CHANGE: Labeling/Packing RE ASON FOR CHANGE: to meet requirements of IPC/JEDEC J-STD -033D standard E XPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: There is no effect on quality and reliability. P RODUCT CAT EGORY: Tantalum Capacitors P ART NUMBERS/SERIES/FAMILIES AFFECTED: Conformal coated series: 591D, 592D, 592W , 195D, 695D, 594D, 595D, 597D, 572D, T95, T96, T97, T98, 13008, and 14002. Molded series devices with the polymer… download now
2018_PCN-TC-003-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com O N E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Product Group: Tantalum Capacitor Division/ December 26 , 2017 / PCN -TC -0003 -201 8 Rev 0 Implement dry packing for 598D/298W and TL8 . DESCRIPTION OF CHANGE: Implement dry packing for 298W 100 -10 Q and TL8 100 -10 A0 . CLASSIFICATION OF CHANGE: Labeling/Packing . REASON FOR CHANGE: Due to unique components characteristics the capacitors require dry packing per J- STD -033 for MSL3 EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: This change will exclude outgassing and cracking of capacitors . PRODUCT CAT EGORY : Tantalum Capacitors . PART NUMBERS/SERIES/FAMILIES AFFECTED: TL8A0107M010C / 298W107X0010Q2T VISHAY BRAND(s): VISHAY SPRAGUE TIME SCHEDULE : Implementation… download now
2018_PCN-SL-SMT-Weidmüller.pdf download now
2018_PCN-SL-SMT-Weidmüller.pdf download now
2018_PCN-SIL-412-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355- 2143 U.S.A. Phone (610) 644-1300 Fax (610) 296- 0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONEN T Procedure # Product Group: Vishay Siliconix/ December 10 , 2018 /PCN -SIL -412 201 8 Rev0 End of Life Notification for Vishay Siliconix SIP4310x DESCRIPTION OF CHANGE: Vishay Siliconix announces the end of life of SIP4310x . CLASSIFICATION OF CHANGE: End of life REASON FOR CHANGE: Closure of ASMC 5” line EXPECTED INFLUENCE ON PERFORMANCE /QUALITY/RELIABILTY : N/A PRODUCT CATAGORY: ICs PART NUMBERS AFFECTED: SIP43101DLP -T1 -E3 , SIP43101DQ -T1 -E3 & SIP43102DQ -T1 -E3 VISHAY BRAND(s): Vishay-Siliconix TIME SCHEDULE: Last time buy orders are required before June 10, 2019 with last shipment scheduled before December 10, 2019. All orders will be Non- cancellable and Non-Returnable (NCNR). This PT N is for notification purposes only. Your… download now
2018_PCN-SIL-406-Rev1.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355- 2143 U.S.A. Phone (610) 644-1300 Fax (610) 296- 0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONEN T Procedure # Product Group: Vishay Siliconix/ June 7, 2018 /PCN -SIL -406 201 8Rev1 Au -Pd coated copper Copper Wire Bonding for Vishay Siliconix SIC631 and SIC632 DESCRIPTION OF CHANGE: Vishay Siliconix has qualified 1.2mil APCC (Au -Pd coated copper) wire b onding for MLP package SIC631 and SIC632. There is no change to the product form, fit, function and reliability with the above. CLASSIFICATION OF CHANGE: Material Set Conversion REASON FOR CHANGE: Copper bond- wire conversion program EXPECTED INFLUENCE ON PERFORMANCE /QUALITY/RELIABILTY : There will be no effect on performance, quality or reliability. PRODUCT CATAGORY: ICs PART NUMBERS AFFECTED: SIC631CD- T1-GE3 , SIC632ACD -T1 -GE3, SIC632CD -T1 -GE3, SIC632CD -T1 -GE3 -M VISHAY… download now
2018_PCN-SIL-404-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355- 2143 U.S.A. Phone (610) 644-1300 Fax (610) 296- 0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONEN T Procedure # Product Group: Vishay Siliconix/ May 24, 2018 /PCN -SIL -40420 18 Additional Test Capacity for Vishay Siliconix ICs MLP 5x5 and MLP 3.5x4.5 DESCRIPTION OF CHANGE: To meet increasing demand, Vishay Siliconix has expanded test capacity for SIC53x and SIC63x to Subcontractor AMKOR in the Philippines CLASSIFICATION OF CHANGE: Test Site REASON FOR CHANGE: Additional Test Capacity EXPECTED INFLUENCE ON PERFORMANCE /QUALITY/RELIABILTY : There will be no effect on performance, quality or reliability. PRODUCT CATAGORY: ICs PART NUMBERS AFFECTED: VISHAY BRAND(s): Vishay-Siliconix TIME SCHEDULE: Shipment of products will begin June 25, 2018 SAMPLE AVAILABILITY : Please contact your regional Vishay Sales office for sample availability.… download now
2018_PCN-SIL-017-Rev0.pdf Product Group: Vishay Siliconix/ SIL -0172018 / September 12, 2018 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355- 2143 U.S.A. Phone (610) 644- 1300 Fax (610) 296- 0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONEN T Procedure # Additional Commercial Power MOSFET Wafer Fabrication Capacity DESCRIPTION OF CHANGE: To meet increasing demand for Low Voltage Power MOSFET products, Vishay Siliconix has completed qualification for the expansion of commercial Low Voltage MOSFET 8 -inch wafer capacity to foundry partner Tower -Jazz located in San Antonio, Texas . Tower -Jazz is a wholly -owned subsidiary of Tower Semiconductor, Ltd. The 80,000 square- foot clean-room facility was opened by Maxim Integrat ed in 2008, and will retain highly-skilled production personnel, quality systems and integration engineering currently support ing Maxim and Vishay. The Tower Texas facility supports advanced… download now
2018_PCN-SIL-015-Rev1.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355- 2143 U.S.A. Phone (610) 644-1300 Fax (610) 296- 0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONEN T Procedure # Product Group: Vishay Siliconix/ August 30 , 2018 /PCN - SIL -0152018 Obsolescence of Commercial Power Mosfets DESCRIPTION OF CHANGE: Vishay Siliconix announces the end of life of several commercial Low Voltage Power MOSFET products. Many of these part numbers to be obsoleted possess older technology, and will be replaced by more advanced products . CLASSIFICATION OF CHANGE: Product Obsolescence REASON FOR CHANGE: Migration to advanced Silicon Die Technologies. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: None PRODUCT CATAGORY: Low Voltage MOSFET PART NUMBERS/SERIES/FAMILIES AFFECTED: VISHAY BRAND(s): Vishay -Siliconix TIME SCHEDULE: Last time buy orders must be received by February 26, 2019, Last Time Shipments must be… download now
2018_PCN-SIL-011-Rev0.pdf Product Group: Vishay Siliconix/ SIL -0112018 / May 25 , 2018 Vishay Intertechnology, I nc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355- 2143 U.S.A. Phone (610) 644-1300 Fax (610) 296- 0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMP ONENT Procedure # Additional Commercial Power MOSFET Wafer Fabrication Capacity DESCRIPTION OF CHANGE: To meet increasing demand for High Voltage Power MOSFET products, Vishay Siliconix has completed the qualification for the expansion of commercial High Voltage MOSFET capacity with foundry partner Founder Microelectronics International Co. Ltd. (FMIC) in Shenzhen, China. FMIC wafer fab contains a 96,000 square-meter clean-room facility w hich was opened in 2003, and employs highly -skilled wafer production personnel who have been qualified to follow the same quality systems and integration engineering currently support ing Vishay products . FMIC is certified to ISO 9001, ISO14001 and… download now
2018_PCN-SIL-008-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355- 2143 U.S.A. Phone (610) 644-1300 Fax (610) 296- 0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONEN T Procedure # Product Group: Vishay Siliconix/ May 10 , 2018 /PCN - SIL -0082018 Rev0 End of Life Notification – SQ7414AEN DESCRIPTION OF CHANGE: This document is being issued to you to announce that Vishay part number SQ7414AEN -T1_GE3 is being discontinued and replaced by SQ7414CENW-T1_GE3. This replacement represents a migration to more advanced Silicon technologies and material sets that are currently supported in Vishay’s high- volume production. CLASSIFICATION OF CHANGE: Material Set Conversion REASON FOR CHANGE: M igration to advanced technologies EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: No ne PRODUCT CATE GORY: Automotive MOSFETs VISHAY PART NUMBERS AFFECTED: Affected P art Replacement Part SQ7414AEN -T1_GE3 SQ7414CENW… download now
2018_PCN-SIL-006-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355- 2143 U.S.A. Phone (610) 644-1300 Fax (610) 296- 0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONEN T Additional Commercial Power MOSFET Test Capacity DESCRIPTION OF CHANGE: Vishay is pleased to announce additional test capacity for PPAKSC70 products at our manufacturing subcontractor partner Unisem Group. Located in Ipoh, Malaysia, Unisem has been a manufacturing partner of Vishay for over 15 years including for PPAKSC70 commercial MOSFET products . Unisem is ISO9001/1 4001 and TS16949 certified. Adding testing capacity at Unisem will create a turn- key solution for Vishay’s Low Voltage MOSFET product ion in PPAKSC70 packages , therefore streamlining manufacturing to improve production flow from wafer probe through tape- and-reel. Unisem’s test QA system s are consistent with Vishay including Gage R&R, Calibration techniques, Bin… download now
2018_PCN-SIL-005-Rev0.pdf Product Group: Vishay Siliconix/ March 20 , 2018 /PCN -SIL -005 2018 Rev 0 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355- 2143 U.S.A. Phone (610) 644- 1300 Fax (610) 296- 0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONEN T Procedure # Vishay Siliconix Announces Additional Conversion to Copper Bondwire for Commercial Power MOSFETs DESCRIPTION OF CHANGE: Vishay Siliconix announces the qualification for production of SOIC8 part numbers SI4948BEY -T1 -E3 and SI4948BEY -T1 -GE3 with copper bon d-wire. Manufacturing of th is Low Voltage MOSFET SOIC8 package with Copper wire will add to Vishay Siliconix Copper wire product families in production since November 2007. CLASSIFICATION OF CHANGE: Material set conversion REASON FOR CHANGE: Part of continued quality improvement program . EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: Enhancement to long-term product reliability . PRODUCT… download now
2018_PCN-SIL-003-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355- 2143 U.S.A. Phone (610) 644-1300 Fax (610) 296- 0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONEN T Procedure # Product Group: Vishay Siliconix/ March 14, 2018 /PCN - SIL -0032018 Obsolescence of Commercial Power Mosfets DESCRIPTION OF CHANGE: Vishay Siliconix announces the end of life of several commercial Low Voltage and High Voltage Power MOSFET products. Many of these part numbers to be obsoleted possess older technology, and will be replaced by more advanced products . CLASSIFICATION OF CHANGE: Product Obsolescence REASON FOR CHANGE: Migration to advanced Silicon Die Technologies. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: None PRODUCT CATAGORY: Low Voltage MOSFET PART NUMBERS/SERIES/FAMILIES AFFECTED: VISHAY BRAND(s): Vishay -Siliconix TIME SCHEDULE: Last time buy orders must be received by September 14, 2018, Last Time… download now
2018_PCN-SIL-001-Rev0.pdf Product Group: Vishay Siliconix/ SIL -001 2018 / January 24, 2018 Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355- 2143 U.S.A. Phone (610) 644-1300 Fax (610) 296- 0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONEN T Procedure # Additional Commercial Power MOSFET Wafer Fabrication Capacity DESCRIPTION OF CHANGE: To meet increasing demand for Low Voltage Power MOSFET products, Vishay Siliconix has completed qualification for the expansion of commercial Low Voltage MOSFET 8 -inch wafer capacity to foundry partner Tower -Jazz located in San Antonio, Texas . Tower -Jazz is a wholly -owned subsidiary of Tower Semiconductor, Ltd. The 80,000 square- foot clean-room facility was opened by Maxim Integrat ed in 2008, and will retain highly-skilled production personnel, quality systems and integration engineering currently support ing Maxim and Vishay. The Tower Texas facility supports advanced… download now
2018_PCN-SF-Rev0.pdf SFERNICE / SPECTROL / PANEL POTENTIOMETERS Laser m arking of the dot on metallic knob DESCRIPTION OF CHANGE: Possibility to use both current Drilling marking and laser marking for marking of the dot on the knob , on potentiometer model P16, P16S , PA16, P A16S (Minor change ). All other products specifications remain unchanged. CLASSIFICATION OF CHANGE: Production REASON FOR CHANGE: Marking rationalization & Improvement of production flow EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: none PRODUCT CATAGORY: Resistor, variable PART NUMBERS/SERIES/FAMILIES AFFECTED: refer to attached PNs list VISHAY BRAND(s): SFERNICE SPECTROL TIME SCHEDULE: Start Shipment Date: W38/18 Last Time Buy Date: N/A Last Time Shipment Date: N/A SAMPLE AVAILABILITY: W26 /18 PRODUCT IDENTIFICATION: Date Code QUALIFICATION DATA: Available on request This PCN is considered approved, without further notification, unless we receive specific customer concerns before week 30 /201 8 or as specified by contract.… download now
2018_PCN-SF-218-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # MCB FIXED RESIST ORS C..T, VN, VC Series New Marking DESCRIPTION OF CHANGE: In line with our commitment for continuous improvement, Vishay MCB is implementing a new Marking for C..T, VN, VC Wirewound Resistors . Old marking was ink stamping. New parts will be marked with Laser. All other products specifications remain unchanged. CLASSIFICATION OF CHANGE: Marking REASON FOR CHANGE: Product Improvement EXPECTED INFLUENCE ON QUALITY / RELIABILTY / PERFORMANCE : none PRODUCT CATEGORY: Fixed Resist or, PART NUMBERS/SERIES/FAMILIES AFFECTED: C..T, VN, VC (see affected P/Ns below (annex 1 ) VISHAY BRAND(s): VISHAY SFERNICE MCB TIME SCHEDULE: Start shipment date: Oct 15 th… download now
2018_PCN-SF-215-Rev0.pdf SFERNICE / SPECTROL / PANEL POTENTIOMETERS Laser m arking of the dot on metallic knob DESCRIPTION OF CHANGE: Possibility to use both current Drilling marking and laser marking for marking of the dot on the knob , on potentiometer model P16, P16S , PA16, P A16S (Minor change ). All other products specifications remain unchanged. CLASSIFICATION OF CHANGE: Production REASON FOR CHANGE: Marking rationalization & Improvement of production flow EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: none PRODUCT CATAGORY: Resistor, variable PART NUMBERS/SERIES/FAMILIES AFFECTED: refer to attached PNs list VISHAY BRAND(s): SFERNICE SPECTROL TIME SCHEDULE: Start Shipment Date: W38/18 Last Time Buy Date: N/A Last Time Shipment Date: N/A SAMPLE AVAILABILITY: W26 /18 PRODUCT IDENTIFICATION: Date Code QUALIFICATION DATA: Available on request This PCN is considered approved, without further notification, unless we receive specific customer concerns before week 30 /201 8 or as specified by contract.… download now
2018_PCN-SF-206-Rev0.pdf SFERNICE / SPECTROL / PANEL POTENTIOMETERS Laser m arking DESCRIPTION OF CHANGE: Possibility to use both current tampography stamping and laser marking on potentiometer model PE30, P30L, PRV4, P10, P12, P13, T13, T12, P16, P16S , PA16, PA16S , PRV6 , PARV6 , T7, P8 S, P8P (Minor change ). All other products specifications remain unchanged. CLASSIFICATION OF CHANGE: Production REASON FOR CHANGE: Various Production improvement (Minimize the use of marking inks ; Laser m arking insensitive to chemicals; Imp rovement of production flow ) EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: none PRODUCT CATAGORY: Resistor, variable PART NUMBERS/SERIES/FAMILIES AFFECTED: refer to attached PNs list VISHAY BRAND(s): SFERNICE SPECTROL TIME SCHEDULE: Start Shipment Date: W18 /18 Last Time Buy Date: N/A Last Time Shipment Date: N/A SAMPLE AVAILABILITY: W09 /18 PRODUCT IDENTIFICATION: Date Code QUALIFICATION DATA: Available on request This PCN is considered approved, without further notification,… download now
2018_PCN-PILKOR-PPRR-Serie.pdf download now
2018_PCN-PI-E3031.pdf PCN - Product Change Notification No.: Date: Originator: Subject: Related product: Reason of change: In order to stabilize the delivery time to meet customer's demand. PI-E3031 10.01.2018 B. Meier Loose piece terminals Schedule: step by step see excel file In addition to Nishikurayoshi factory (Japan), Jakarta factory shall be added as production and shipping place. Description of change: Identification of change: JST Deutschland GmbH Küferstr. 15 D-73650 Winterbach Phone: +49/7181/4007-0 FAX: +49/7181/4007-21 e-mail: customer.service@jst.de www.jst.de register court: Amtsgericht Stuttgart HRB 280991 CEO: Masao Yoshimura download now
2018_PCN-PDN-028.pdf page 1 of 1 4.14F14 P RODUCT D ISCONTINUATION N OTICE PDN No.: 2018/028 IXYS product type: Type Recommended replacement DSI75-12B DMA200X(XA)1600NA DSAI75-12B DMA200X(XA)1600NA \ DA A200X(XA)1800NA DSAI75-16B DMA200X(XA)1600NA \ DAA200X(XA)1800NA DSAI75-18B DAA200X(XA)1800NA Reason : Old technology / low demand Last time order date: 31.07.2019 Last time delivery date: 31.12.2019 Internal Reference: PO_2018-028 In case of any question, please contact Initiator Title/Function Date e-mail Ostmann MP1 18.12.2018 h.ostmann@ixys.de IXYS Semiconductor GmbH Edisonstr. 15 D-68623 Lampertheim Phone: +49-6206-503-xxx Fax: +49-6206-503 -627 Customer response: (please fill in and return by e-mail, fax or mail w ithin 4 weeks) for further questions / information Company: ___________________________________________________ ______ please comment Name & Position: ___________________________________________________ ______ Phone / Fax No.: ___________________________________________________ ______… download now
2018_PCN-OSI-1038-Rev0.pdf DESCRIPTION OF CHANGE: CLASSIFICATION OF CHANGE: REASON FOR CHANGE: EXPECTED INFLUENCE ON QUALITY RELIABILITY / PERFORMANCE: PRODUCT CATEGORY: VISHAY BRAND(s): SAMPLES AVAILABLE BEGINNING: PRODUCT IDENTIFICATION: QUALIFICATION DATA: Product Change Notification Product Group: Opto Sensors & IRDC 13-SEP-2018 / PCN OSI-1038-2018 Rev. 0 TITLE: New casting epoxy for PIN diodes A new casting epoxy will be introduced for the list ed photodetectors. Direct Materials (Major) The material supplier has discontinued the current casting epoxy and introduced a new material. The new material has the same optical properties as the current version. There is no change in the performance and characteristics of th e photodiodes. Quality, reliabiliy and performance of the devices are not changing. Photo Detectors PART NUMBERS / SERIES / FAMILIES AFFECTED: BPV11F, BPV11FS, BPV22F, BPV22F-AS12, BPV23F, BPV23FL, BPV23FL-AS12, BPV23FL-ES12Z, BPW41N, BPW41N-AS12Z VISHAY SEMICONDUCTORS TIME SCHEDULE: Annotations… download now
2018_PCN-OSI-1034-Rev0.pdf Product Change Notification Product Group:Opto Sensors & IRDC 13-AUG-2018 / PCN OSI-1034-2018 Rev. 0 TITLE: Release of Halogen Free PCB material for TFBS27xx_TFBS4xxx Release of halogen free PCB material for our TFBS21 xx and TFBS4xxx devices. DESCRIPTION OF CHANGE : Lead Free Switchover CLASSIFICATION OF CHANGE : To qualify PCB with Halogen Free material for the b elow mentioned devices. The reason for the change is triggered by the suppl ier, who discontinued the existing PCB material and replace it with halogen f ree material. This is a another step in the commitment towards en vironment friendly practices. REASON FOR CHANGE: No influence on form, fit and function of the conce rned devices No influence on quality expected No influence on reliability expected EXPECTED INFLUENCE ON QUALITY RELIABILITY / PERFORMANCE: IRDA® Transceivers / Optical Sensors PRODUCT CATEGORY : PART NUMBERS / SERIES / FAMILIES AFFECTED: TFBS4650-TR1 TFBS4650-TR3 TFBS4650-TT3 TFBS4650E-TR1 TFBS4650E-TR3… download now
2018_PCN-OSI-1015-2018-Rev0.pdf DESCRIPTION OF CHANGE: CLASSIFICATION OF CHANGE: REASON FOR CHANGE: EXPECTED INFLUENCE ON QUALITY RELIABILITY / PERFORMANCE: PRODUCT CATEGORY: VISHAY BRAND(s): SAMPLES AVAILABLE BEGINNING: PRODUCT IDENTIFICATION: QUALIFICATION DATA: Product Change Notification Product Group: Opto Sensors & IRDC 17-APR-2018 / PCN OSI-1015-2018 Rev. 0 TITLE: Wafer size consolidation for BPV23*, TEMD5*20X01 and VBP104* product families Vishay Opto division consolidates raw material for BPV23*, TEMD5*20X01 and VBP104* product families to 6-inch silicon wafe r diameter. The new wafer size has been qualified according to Vishay standards. There is no change in datasheets, performance or re liability of the affected products. Wafer/Chip/Pellet Process/Structure Wafer size consolidation No change in form, fit, function and reliability pe rformance Photo Detectors PART NUMBERS / SERIES / FAMILIES AFFECTED: BPV23F BPV23FL BPV23NF BPV23NFL TEMD5020X01 TEMD5120X01 VBP104FAS VBP104FASR VBP104S VBP104SR VISHAY… download now
2018_PCN-OMV-1052_Rev0.pdf DESCRIPTION OF CHANGE: CLASSIFICATION OF CHANGE: REASON FOR CHANGE: EXPECTED INFLUENCE ON QUALITY RELIABILITY / PERFORMANCE: PRODUCT CATEGORY: VISHAY BRAND(s): SAMPLES AVAILABLE BEGINNING: PRODUCT IDENTIFICATION: Product Change Notification Product Group: Opto Modules & Visibles 04-DEC-2018 / PCN OMV-1052-2018 Rev. 0 TITLE: Redesign for the H11D, SFH601, SFH619A and SFH640 series optocoupler products An alternative design for the H11D, SFH601, SFH619A and SFH640 series optocoupler products is being introduced. The exist ing die and manufacturing location will change. The new manufacturing location is currently used for simila r optocouplers. As a result here is a slight difference in the dimensions of the package from this location. The p ackages still conform to the industry standards. There are some electrical specification changes as well, the main ones are as follows: H11D series: Max load current changed to 50 mA from 100mA SFH601 series: Max VF at 60mA increased to 1.45 V f rom… download now
2018_PCN-OMV-1046-Rev0.pdf DESCRIPTION OF CHANGE: CLASSIFICATION OF CHANGE: REASON FOR CHANGE: PRODUCT CATEGORY: VISHAY BRAND(s): Product Termination Notification Product Group: Opto Modules & Visibles 09-NOV-2018 / PTN OMV-1046-2018 Rev. 0 TITLE: Obsolescence of optocoupler products with low sales By submitting this notice Vishay is announcing that the product listed herein have reached their end of life and activities have started to cease production in the coming months. Product Obsolescence The low demand for these products in the market has rendered these parts unfeasible to continue to support. Optocouplers, Isolators PART NUMBERS / SERIES / FAMILIES AFFECTED: 6N135-3054 CNY17F-2X002 H11A1-X001, H11A1-X006, H11A1-X009 H11AA1-X007, H11AA1-X009, H11AA1-X009T H11D3-X007 IL202-X001 IL250-X001, IL250-X007, IL250-X009, IL250-X009T IL251, IL251-X009T IL252-X001, IL252-X007, IL252-X009, IL252-X009T, IL 252-X016, IL252-X017, IL252-X017T ILD620GB-X009 ILD620-X007, ILD620-X009 ILD621GB-X001, ILD621GB-X007 ILQ620-X007… download now
2018_PCN-OMV-1041-Rev0.pdf DESCRIPTION OF CHANGE: CLASSIFICATION OF CHANGE: REASON FOR CHANGE: EXPECTED INFLUENCE ON QUALITY RELIABILITY / PERFORMANCE: PRODUCT CATEGORY: VISHAY BRAND(s): SAMPLES AVAILABLE BEGINNING: PRODUCT IDENTIFICATION: QUALIFICATION DATA: Product Change Notification Product Group: Opto Modules & Visibles 24-OCT-2018 / PCN OMV-1041-2018 Rev. 0 TITLE: Change in surface appearance and ISC min test for LH1262 and VO1263 series MOSFET drivers There are several changes included in this PCN. 1. The surface texture of the package is being chan ged from rough to smooth. 2. The 5mA and 10 mA ISC test are being changed on the VO1263 series products ISC at 5 mA IF: From 3.0 to 2.7 uA ISC at 10 mA IF: From 7.5 to 7.0 uA 3. There will be a slight change to the marking of the product, the UL system code and the device opti on identifier is being removed. The UL system code is being phase d out in favor of listing the actual product on the certificate. Marking / Molding/Coating The reason for this change is… download now
2018_PCN-OMV-1037-Rev0.pdf DESCRIPTION OF CHANGE: CLASSIFICATION OF CHANGE: REASON FOR CHANGE: EXPECTED INFLUENCE ON QUALITY RELIABILITY / PERFORMANCE: PRODUCT CATEGORY: VISHAY BRAND(s): SAMPLES AVAILABLE BEGINNING: PRODUCT IDENTIFICATION: QUALIFICATION DATA: Product Change Notification Product Group: Opto Modules & Visibles 11-SEP-2018 / PCN OMV-1037-2018 Rev. 0 TITLE: Die change on the optocoupler 6N139 product series. Vishay Optoelectronics Division is announcing that the detector die of the 6N139 product series is being changed. The marking of the product will also have a slight change, the UL system code and the device option id entifier is being removed. The UL system code is being phased o ut in favor of listing the actual product. Direct Materials (Major) This change was brought about by the obsolescence o f the current chip by the chip supplier. These products have undergone a comprehensive quali fication and characterization program. The new Detector die was found to have no adverse effects on the… download now
2018_PCN-OMV-1031-Rev0.pdf Product Change Notification Product Group:Opto Modules & Visibles 17-JUN-2018 / PCN OMV-1031-2018 Rev. 0 TITLE: VO2223 and VO2223A IFT min addition Data sheet change. An IFT minimum specification has been added to the data sheet. Prior to this change there was only a m aximum data sheet limit. This maximum limit is unchanged. DESCRIPTION OF CHANGE : Test Process CLASSIFICATION OF CHANGE : Datasheet update with new IFT minimum value, to ref lect a tighter IFT and switching performance. REASON FOR CHANGE : There is no change in the construction, material or manufacturing methods used in the manufacturing of these parts. This chan ge is only impacting the data sheet. There is no impact to the quality or re liability of the product. EXPECTED INFLUENCE ON QUALITY RELIABILITY / PERFORMANCE: Optocouplers, Isolators PRODUCT CATEGORY : PART NUMBERS / SERIES / FAMILIES AFFECTED: Coupler VISHAY SEMICONDUCTORS VISHAY BRAND(s) : TIME SCHEDULE: Annotations about time schedule: Start Shipment Date:… download now
2018_PCN-OMV-1023-Rev0.pdf Product Change Notification Product Group:Opto Modules & Visibles 13-SEP-2018 / PCN OMV-1023-2018 Rev. 0 TITLE: New chip supplier for 3mm LEDs; further parts to PCN 1019 Due to business contingency measures we release an alternative chip supplier for GaAsP & GaP based products. The new ch ips are qualified according to Vishay's high quality standards and th e supplier fulfills all our environmental and quality standards (including TS16949) for the fabrication of the chip s. There is no change in form fit and function. Sam ples are available upon request with a lead time of 4 weeks DESCRIPTION OF CHANGE: Wafer/Chip/Pellet Site CLASSIFICATION OF CHANGE: Release of alternative chip supplier due to busines s contingency REASON FOR CHANGE : no influence on reliability and performance EXPECTED INFLUENCE ON QUALITY RELIABILITY / PERFORMANCE: LEDs PRODUCT CATEGORY : PART NUMBERS / SERIES / FAMILIES AFFECTED: Please refer to attached detailed part number list. VISHAY SEMICONDUCTORS VISHAY… download now
2018_PCN-OMV-1022-Rev0.pdf DESCRIPTION OF CHANGE: CLASSIFICATION OF CHANGE: REASON FOR CHANGE: EXPECTED INFLUENCE ON QUALITY RELIABILITY / PERFORMANCE: PRODUCT CATEGORY: VISHAY BRAND(s): SAMPLES AVAILABLE BEGINNING: PRODUCT IDENTIFICATION: QUALIFICATION DATA: Product Change Notification Product Group: Opto Modules & Visibles 24-OCT-2018 / PCN OMV-1022-2018 Rev. 0 TITLE: Change in appearance (surface texture) of the BRT22 and BRT23 product series There are 2 changes included in this PCN. 1. The surface texture of the package is being chan ged from rough to smooth. 2. There will be a slight change to the marking of the product, the UL system code and the device opti on identifier is being removed. The UL system code is being phase d out in favor of listing the actual product on the certificate. Marking / Molding/Coating The change is being made to standardize the product ion to one form of package finish. These are the last products to use a wet blast process for surface finishing of the products. The process is… download now
2018_PCN-OMV-1019-Rev0.pdf Product Change Notification Product Group:Opto Modules & Visibles 14-MAY-2018 / PCN OMV-1019-2018 Rev. 0 TITLE: New Chip Supplier for Leaded LEDs and 7 Segment Displays Due to business contingency measures we release an alternative chip supplier for GaAsP & GaP based products. The new ch ips are qualified according to Vishay’s high quality standards and th e supplier fulfills all our environmental and quality standards (including TS16949) for the fabrication of the chip s. There is no change in form fit and function. Sam ples are available upon request with a lead time of 4 weeks. DESCRIPTION OF CHANGE : Wafer/Chip/Pellet Site CLASSIFICATION OF CHANGE : Release of alternative chip supplier due to busines s contingency REASON FOR CHANGE : no influence on reliability and performance EXPECTED INFLUENCE ON QUALITY RELIABILITY / PERFORMANCE: Displays / LEDs PRODUCT CATEGORY : PART NUMBERS / SERIES / FAMILIES AFFECTED: Please refer to attached detailed part number list. VISHAY SEMICONDUCTORS… download now
2018_PCN-MLC 00006-Rev0.pdf VJ Vitramon Series Vishay Vitramon www.vishay.com Technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 © 2018 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Product Notification Dear value d Customers, Date : 16 . May 2018 Vishay is bringing the dimensions of the pads on several of our SMD MLCC Commer cial Series in line with industry norms. The series affected and the changes are summarized below: Series Datasheet link VJ Commercial Series http://www.vishay.com/doc?45199 High Q http://www.vishay.com/doc?45050 VJ Non -Magnetic Series for Epoxy Bonding : http://www.vishay.com/doc?45128 VJ Non -Magnetic Series for IR Reflow Soldering : http://www.vishay.com/doc?45227 VJ OMD Series : http://www.vishay.com/doc?45198 HV High Voltage Series : http://www.vishay.com/doc?45228 VJ Source Energy Capacitor (SEC) :… download now
2018_PCN-MLC-00012-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355- 2143 U.S.A. Phone (610) 644- 1300 Fax (610) 296- 0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Product Group: Vishay Division MLCC / Nov. 5 , 2018 / PCN -MLC -00012 -2018 Rev 0 Change to packaging of VJ Commercial Series 0805 X7R 100nF 16V and 25 V DESCRIPTION OF CHANGE: Move all 0805 X7R 100nF in 16V and 25V to plastic (embossed) carrier tape . CLASSIFICATION OF CHANGE: Labeling/Packing REASON FOR CHANGE: Streamlining packaging to one style for the 0805 X7R 100nF EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: - Electrical parameters meet the same specification - No influence is expected for applications PRODUCT CATEGORY: Capacitors PART NUMBERS/SERIES/FAMILIES AFFECTED: Datasheet : http://www.vishay.com/doc?45199 Vishay Vitramon Commercial Datasheet : http://www.vishay.com/doc?45199 Old PN New PN VJ0805Y104 xXJ xCxxx… download now
2018_PCN-MLC-00007-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355- 2143 U.S.A. Phone (610) 644- 1300 Fax (610) 296- 0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Product Group: Vishay Division MLCC / May 2 9, 2018 / PCN -MLC -0000 7-2018 Rev 0 B oard F lex Testing Sequence Change for Automotive Series DESCRIPTION OF CHANGE: Th e board flex testing sequence change from each lot to sampling plan. CLASSIFICATION OF CHANGE: Test process REASON FOR CHANGE: The statistics since 2013 (from where we have computerized data base) no test failures found in lots tested. Sampling board flex test plan is applicable instead of tes ting each lot. EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: No influence is expected. PRODUCT CATEGORY: Capacitors "X" termination code PART NUMBERS/SERIES/FAMILIES AFFECTED: VJ…31 , datasheet : http://www.vishay.com/doc?45040 VJ…31X , datasheet :… download now
2018_PCN-MLC-00004-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355- 2143 U.S.A. Phone (610) 644- 1300 Fax (610) 296- 0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Product Group: Vishay Division MLCC / June 5 , 2 018 / PCN -MLC -00004 -2018 Rev 0 Extend use of C153 Dielectric Material for X7R MLCC DESCRIPTION OF CHANGE: Extend use of C153 (Vi shay internal designations) dielectric material currently qualified and successfully and replace C2 97 (Vi shay internal designations) for below listed values CLASSIFICATION OF CHANGE: Change of dielectric material REASON FOR CHANGE: Improved reliability of pr oducts: - C153 is less prone to thermal shock stress - C153 is less sensitive to termination deficiencies - C153 has a better level of reliability compared to C297 EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: - No change in electrical parameters - No influence expected in applications - In creased… download now
2018_PCN-MLC-00001-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Product Group: Vishay Division MLCC/May 03, 2018/PCN-MLC-00001-2018 Rev 0 Material Change for 1206 / 1210 C0G(NP0) VJ HVArc Guard® Series DESCRIPTION OF CHANGE: Low Capacitance values from 10 pF to 99 pF with voltage 1000V / 1500V in size 1206 and 1210 of HVArc Guard® series changed to be produced with a mature material that is ROHS compliant without use of exemptions 7c(I) and 7c(II). CLASSIFICATION OF CHANGE: Assembly Process / Structure REASON FOR CHANGE: Streamlining ROHS complains for complete series. EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: None PRODUCT CATEGORY: Capacitors PART NUMBERS/SERIES/FAMILIES AFFECTED: The part numbers affected attached . VJ HVArc Guard® Series : http://www.vishay.com/doc?45197 VISHAY… download now
2018_PCN-LSF-SMT-Weidmüller.pdf download now
2018_PCN-LSF-SMT-Weidmüller.pdf download now
2018_PCN-DR-00014-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Procedure # $ G G - X D U H ] 0 H [ L F R D V D Q D G G L W L R Q D O P D Q X I D F W X U L Q J O R F D W L R Q I R U : 6 / : 6 / 3 W \ S H L Q V L ] H V R I U H V L V W R U V ' ( 6 & 5 , 3 7 ,O 1 O ) & + $ 1 * ( Add Juarez, Mexico as an additional manufacturing location to our current Columbus, NE location for WSL2726 / WSL3921 / WSL4026, WSLP2726 / WSLP3921 / WSLP4026 resistors. CLASSIFICATION OF CHANGE: Assembly Site REASON FOR CHANGE: Add a second manufacturing site to increase capacity and ensure source of supply with two manufacturing locations of Columbus & Juarez. EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: No change. PRODUCT CATEGORY: Resistors, Discrete PART… download now
2018_PCN-DR-00006-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # Additional Production Capacity added to Juarez, Mexico facility on standard WSBM8518, WSBS8518 … 20 and WSBS8518 … 40 products. DESCRIPTION OF CHANGE: Vishay has added production equipment /capacity in our Juarez, Mexico facility. Columbus, NE USA will still perform all punching/stab ilization processing but any following operation will now be able to be performed in either Columbus, NE or Juarez, Mexico. CLASSIFICATION OF CHANGE: Assembly Site REASON FOR CHANGE: As volumes continue to grow, additional capacity is needed to meet those demands and the use of our Juarez, Mex ico facility is needed for the space and labor. EXPECTED INFLUENCE ON… download now
2018_PCN-DI-00419-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F AC T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O NE N T Procedure # Marking Change on the 300 Series Connectors DESCRIPTION OF CHANGE: The Vishay 300 Series connectors will immediately update the marking method from ink stamping to laser marking. CLASSIFICATION OF CHANGE: Marking REASON FOR CHANGE: Ink stamping is going obsolete and need to move product to laser marking. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: Laser marking is an equivalent marking option. PRODUCT CATAGORY: Connectors PART NUMBERS/SERIES/FAMILIES AFFECTED: 300PE-15, 300PE-19, 300PE-19-101, 300PE-19-102, 300PE-19W, 300PE-25, 300PE-25-101 300PE-25-102, 300PE-25-103, 300PE-25-104, 300PE-25W, 300PE-7, 300PE-7-101, 300PE-7-102 300PR-15, 300PR-15-104, 300PR-19,… download now
2018_PCN-DD-025-Rev0.pdf 1/2 Product Group: Diodes Division / December 24 , 2018 / PCN -DD -025 -201 8 Rev 0 6 inch Wafer for Low Voltage ( ≤20 V) SMBJxx(C)D and Non -automotive Grade SMC5K Product s DESCRIPTION OF CHANGE : Vishay Diodes Division will have additional 6 inch wafer capacity for SMBJ5.0(C)D~20(C)D -M3 and non -automotive grade SMC5K10A~20A -M3 T ransZorb ® TVS product. There will be no change in form, fit and function of final products. CLASSIFICATION OF CHANGE: Wafer diameter REASON FOR CHANGE: Capacity expansion EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: No changes in quality and reliability performance PRODUCT CATEGORY: TransZorb ® TVS PART NUMBERS/SERIES/FAMILIES AFFECTED: Involved part numbers are listed below . SMB (DO -214AA) Package SMBJ5.0D -M3/H SMBJ11D -M3/H SMBJ5.0CD -M3/H SMBJ11CD -M3/H SMBJ5.0D -M3/I SMBJ11D -M3/I SMBJ5.0CD -M3/I SMBJ11CD -M3/I SMBJ6.0D -M3/H SMBJ12D -M3/H SMBJ6.0CD -M3/H SMBJ12CD -M3/H SMBJ6.0D -M3/I SMBJ12D -M3/I SMBJ6.0CD -M3/I SMBJ12CD -M3/I SMBJ6.5D… download now
2018_PCN-DD-023-Rev0.pdf 1/5 Product Group: Diodes Division / December 20 , 201 8 / PCN -DD -023 -2018 Rev. 0 Manufacturing Location Change for Automotive Grade Products in TO -263 & ITO -220 Package s DESCRIPTION OF CHANGE : Vishay Diodes Division is transfer ring the assembly & final test of all automotive grade products in TO -263 & ITO -220 package s from Vishay Tianjin factory to Vishay Xi’an factory . In addition to the location change , all Schottky Rectifier products in ITO -220 package will have the following changes . 1. Solder paste composition changed from 88%Pb/2%Ag/10%Sn to 92.5 %Pb/2.5%Ag/5%Sn. 2. MBR F1545 CTHE 3 & MBRF1560CTH E3 , clip size for device inner soldering optimized from 42*42mil to 34*34mil . All other assembly raw material & process used in Vishay Xi’an factory are the sa me as those used in current Vishay Tianjin factory production . There is no change in POD spec. , form, fit and function of the device in customer application s. All involved change s are summarized in below… download now
2018_PCN-DD-022-Rev0.pdf 1/2 Product Group: Diodes Division / November 30 , 20 18 / PCN -DD -022 -20 18 Rev 0 Additional GPP Wafer Foundry for Axial & Bridge Rect ifier s DESCRIPTION OF CHANGE : In addition to the existing in-house GPP wafer source, Vishay Diodes Division is introduc ing Subcon tractor GPP foundry in China for Axial & Bridge rectifie rs. Also taking this opportunity , the plant location of Bridge rectifier in Yang Zhou is being moved to the new place nearby the original factory for capacity expansion and compliance with city construction planning in China. There is no change in form, fit and function on all involved product s. CLASSIFICATION OF CHANGE: Wafer /C hip/Pellet Site , Assembly location REASON FOR CHANGE : Increasing wafer and back -end capacity for delivery sup port EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: No change in qual ity and reliability performance PRODUCT CATEGORY: Rectifier PART NUMBERS/SERIES/FAMILIES AFFECTED: Location change and Additional GPP wafer… download now
2018_PCN-DD-021-Rev0.pdf 1/2 Product Group: Diodes Division / November 1 9, 201 8 / PCN -DD -021 -2018 Rev. 0 Additio nal Final Test Location for SMC and SMP Commercial Grade Rectifiers DESCRIPTION OF CHANGE : In addition to the existing final test location in Tianjin, China, Vishay Diodes Division is introducing an additional final test location in Shandong, China for commercial grade rectifier products in SMC and SMP packages. This subcontractor was already introduced b efore for SMA/ SMB packaged rectifier s commercial grade P/ Ns thru. PCN -DD -010 -2016. There will be no change s in the form, fit and function of th e final products shipped to customer . CLASSIFICATION OF CHANGE: Test site REASON FOR CHANGE: Capacity expansion to support custom er increasing dema nd EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: There will be n o effect on quality, reliability or electrical performance . PRODUCT CATEGORY: Rectifier PART NUMBERS/SERIES/FAMILIES AFFECTED: The involved part numbers are listed below.… download now
2018_PCN-DD-019-Rev0.pdf 1/2 Product Group: Diode s Division / September 26, 201 8 / PCN -DD -019 -20 18 Rev. 0 Addition of Assembly Si te for TO -220 /TO -262 Wire Bond Packages and 8 inch Wafer for 100V TMBS in TO -262 DESCRIPTION OF CHANGE : Vishay Diodes Division is introducing the addition of TO -220/TO -262 wire bond assembly, at the existing subcontractor in Shand ong China for the 170V~200V TMBS products in TO -220 and the 45V~200V TMBS products in TO -262 . Additionally, the 8inch wafer from outsourced foundry in Taiwan (refer to the previous ly issued PCN -DD - 004 -2018 for TO -220 package) is also be qualified and used in the 100V TMBS products in TO -262 . CLASSIFICATION OF CHANGE: Addition of outso urced package and assembly site. Wafer Diameter/Location REASON FOR CHANGE: Capacity expansion for improving delivery s upport . EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFOR MANCE: There will be no effect on quality, reliability performance. PRODUCT CATEGORY: Rectifier s PART NUMBERS/ SERIES… download now
2018_PCN-DD-018-Rev0.pdf 1/4 Product Group: Diodes Division / August 31, 201 8 / PCN -DD -018 -2018 Rev. 0 Manufacturing Location Change for Commercial Grade Products in TO -263 & ITO -220 Clip Bond Package s DESCRIPTION OF CHANGE : Vishay Diodes Division is transfer ring the assembly & final test of all clip bond assembly commercial grade products in TO -263 & ITO -220 package s from Vishay Tianjin factory to Vishay Xi’an factory . In addition to the location change , all Schottky Rectifier products in ITO -220 package will have the following changes . 1. Solder paste composition changed from 88%Pb/2%Ag/10%Sn to 92.5 %Pb/2.5%Ag/5%Sn. 2. MBR F1545 CT -E3 , MBRF1560CT -E3 and MBR F745 -E3 , clip size for device inner soldering optimized from 42*42mil to 34*34mil . All other assembly raw material, process flows and controls used in Vishay Xi’an factory are the sa me as those used in current Vishay Tianjin factory production . There is no change in POD spec. , form, fit and function of the device in customer… download now
2018_PCN-DD-017-Rev0.pdf 1/3 Product Group: Diodes Division / August 24, 201 8 / PCN -DD -017 -2018 Rev 0 Product Discontinuation Notice of Rectifier Products DESCRIPTION OF CHANGE: Vishay Diodes Division would discontinue some of Rectifier Products with low volume sales. CLASSIFICATION OF CHANGE: Product Discontinuation REASON FOR CHANGE: Low sales EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N/A PRODUCT CATEGORY: Rectifiers PART NUMBERS/SERIES/FAMILIES AFFECTED: Involved part numbers are listed below. Obsoleted P/N Alternative P/N Obsoleted P/N Alternative P/N Obsoleted P/N Alternative P/N FEP6AT-E3/45 VS-MUR820-M3 FESE8GT-E3/45 VS-ETU0805-M3 GBL06L-5308E3/51 N/A FEP6BT-E3/45 VS-MUR820-M3 FESE8HT-E3/45 VS-ETU0805-M3 GBL06L-5600E3/51 N/A FEP6CT-E3/45 VS-MUR820-M3 FESE8JT-E3/45 N/A GBL06L-5701E3/51 N/A FEP6DT-E3/45 VS-MUR820-M3 G2SB60L-5700E3/45 N/A GBL06L-6177E3/51 N/A FEPB6AT-E3/45 VS-MURB820-M3 G2SB60L-5700E3/51 N/A GBL06L-6832E3/45 N/A FEPB6AT-E3/81 VS-MURB820-M3 G2SB60L-5751E3/45 N/A… download now
2018_PCN-DD-016-Rev0.pdf GBPC Bridge product marking DESCRIPTION OF CHANGE: Product marking method will move from INK marking to LASER marking. CLASSIFICATION OF CHANGE: Marking REASON FOR CHANGE: Continuous improvement of marking method by means of increased marking permanency. There will be no change on the part marking information printed on the Bridges . EXPECTED INFLUENCE ON QUALITY/RELIABIL ITY/PERFORMANCE: There will be no effect on product performance s. PRODUCT CATEGORY: Diodes & Rectifiers PART NUMBERS/SERIES/FAMILIES AFFECTED: GBPC BRIDGE VS -GBPC3512A VS -GBPC2512A VS -GBPC2502A VS -GBPC3508W VS -GBPC2510W VS -GBPC3510A VS -GBPC2510A VS -S1784 VS -GBPC3506W VS -GBPC2508W VS -GBPC3508A VS -GBPC2508A VS -S1796 VS -GBPC3504W VS -GBPC2506W VS -GBPC3506A VS -GBPC2506A VS -GBPC3512W VS -GBPC3502W VS -GBPC2504W VS -GBPC3504A VS -GBPC2504A VS -GBPC3510W VS -GBPC2512W VS -GBPC2502W VS -GBPC3502A VISHAY BRAND(s): Vishay Semiconductors TIME SCHEDULE : Starting from September 3, 201 8, Vishay will gradually… download now
2018_PCN-DD-015-Rev0.pdf 1/3 Product Group: Diodes Division / July 30, 201 8 / PCN -DD -015 -2018 Rev. 0 Manufacturing Location Change for TO -220 Clip Bond P ackage DESCRIPTION OF CHANGE : Vishay Diodes Division is transfer ring the assembly & final test of all clip bond assembly products in TO -220 package from Vishay Tianjin factory to Vishay Xi’an factory . In addition to the location change , all Schottky Rectifier products will have the following changes . 1. Solder paste composition changed from 88%Pb/2%Ag/10%Sn to 92.5 %Pb/2.5%Ag/5%Sn. 2. MBR15XXCT -E3 and MBR7XX -E3 series , clip size for device inner soldering optimized from 42*42mil to 34*34mil . All other assembly raw material, process flows and controls used in Vishay Xi’an factory are the sa me as those used in current Vishay Tianjin f actory production . There is no change in POD spec. , form, fit and function of the device in customer application s. All involved change s are summarized in below table : Item Before After Assembly Site Vishay… download now
2018_PCN-DD-014-Rev0.pdf 1/2 Product Group: Diodes Division / July 22 , 20 18 / PCN -DD -014 -2018 Rev 0 Additional GPP Wafer Foundry for Bridge Rect ifier s DESCRIPTION OF CHANGE : In addition to the existing in-house GPP wafer source, Vishay Diodes Division is introduc ing Subcon GPP foundry in China for Bridge rectifie rs. There’ll be no change in form, fit and function of final product. CLASSIFICATION OF CHANGE: Wafer /C hip/Pellet Site REASON FOR CHANGE : Increasing wafer capacity for better delivery suppo rt EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: No change in quality and reliability performance. PRODUCT CATEGORY: Rectifier PART NUMBERS/SERIES/FAMILIES AFFECTED: Part number Part number Part number Part number Part number G2SB20-E3/45 GBL04-M3/45 GBU4D-E3/45 GBU6M-M3/45 GSI B15A60N-M3/45 G2SB20-E3/51 GBL04-M3/51 GBU4D-E3/51 GBU6M-M3/51 GSI B15A80N-M3/45 G2SB20-M3/45 GBL06-E3/45 GBU4D-M3/45 GBU8A-E3/45 GSI B2020-E3/45 G2SB20-M3/51 GBL06-E3/51 GBU4D-M3/51 GBU8A-E3/51 GSI B2040-E3/45… download now
2018_PCN-DD-012-Rev0.pdf 1/4 Product Group: Diodes Division / June 1 4, 201 8 / PCN -DD -012 -2018 Rev. 0 Additional Assembly Site for Uni -directi onal TransZorb ® TVS in SMA & SMB P ackages DESCRIPTION OF CHANGE : Vishay Diodes Division is introducing the addition of the Vishay Uni -directional TransZorb ® TVS product in SMA & SM B assembly outsourced package s, at subcontractor in Shandong, China . There is no change in silicon chip , POD spec. , fit and function of the device in customer application . The change of the label size is summarized below: CLASSIFICATION OF CHANGE: Outsourced package and Assembly Site REASON FOR CHANGE: Capacity E xpansion EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: No change in quality; reliability and performance PRODUCT CATEGORY: TransZorb ® TVS PART NUMBERS/SERIES/FAMILIES AFFECTED: Involved P/N list are listed in below table : SMA (DO -214AC) Package: Inner label (size 3 .9*1.6 inch) Subcontractor Inner label (size 3*1.5 inch) Vishay Tianjin P/N List P/N List… download now
2018_PCN-DD-009-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Product Group: Diodes / May 09 , 201 8 / PCN -DD -009 -201 8 Rev 0 Matrix Leadframe Dual Gage Introduction and additional Halogen Free Mold Compound DESCRIPTION OF CHANGE: Vishay Semiconductors announce d the change from Single Row Dual Gauge to Matrix Dual Gauge Lead -frame and the introduction of an additional Halogen Free mold compound on D PAK (TO -252AA) with PCN DD -016 -2016 issued on September 12 th, 2016 . Implementation is now extended also to below Part Numbers that were not included in previous notification. CLASSIFICATION OF CHANGE: Assembly Process/Structure Mo lding/Coating REASON FOR CHANGE: Increase of manufacturing capacity and BOM consolidation for improved… download now
2018_PCN-DD-007-Rev0.pdf Additional a ssembly site for TO -247 package DESCRIPTION OF CHANGE: In order to meet increasing demand of Rectifiers, Vishay Diodes Division is introducing an additional assembly line at a new subcontractor in China for commercial TO -247 Part Numbers . The new subcontractor has received international quality system and environmenta l compliance certification I SO9001 and ISO 14001 . Package Outline will be consolidated as illustrated in the annex 2. Taking the chance of this capacity expansion, product nomenclature will be harmonized: Vishay Diodes Division will discontinue the Part Numbers with PBF suffix and keep active the Halogen free version only ( -N3 suffix). CLASSIFICATION OF CHANGE: Asse mbly Site REASON FOR CHANGE: Capacity expansion for improving delivery support EXPECTED INFLUENCE ON QU ALITY/RELIABILITY/PERFORMANCE: There will be no effect on quality, reliability or electrical performance . PRODUCT CATEGORY: Diodes & Rectifiers PART NUMBERS/SERIES/FAMILIES AFFECTED: TO… download now
2018_PCN-DD-006-Rev0.pdf 1/2 Product Group: Diodes Division / March 23 , 201 8 / PCN -DD -006-2018 Rev 0 Product Discontinuation Notice of Rectifier Products DESCRIPTION OF CHANGE: Vishay Diodes Division would discontinue some of Rectifier Products with low volume sales. CLASSIFICATION OF CHANGE: Product Discontinuation REASON FOR CHANGE: Low sales EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N/A PRODUCT CATEGORY: Rectifiers PART NUMBERS/SERIES/FAMILIES AFFECTED: Involved part numbers are listed below. Discontinued P/N Alternative P/N Discontinued P/N Alternative P/N Discontinued P/N Alternative P/N 1N4001GPE-E3/91 1N4001GPE-E3/54 GP10BE-075E3/93 GP10BE-E3/54 TVR06D-E3/73 RGP10D-E3/73 1N4002GPE-E3/91 1N4002GPE-E3/54 GP10GE-110BE3/93 GP10GE-E3/54 TVR06G-E3/54 RGP10G-E3/54 1N4004GPE-E3/91 1N4004GPE-E3/54 GP10GE-110E3/91 GP10GE-E3/54 TVR06G-E3/73 RGP10G-E3/73 1N4004GPE-E3/93 1N4004GPE-E3/54 GP10GE-110E3/93 GP10GE-E3/54 TVR06J-E3/54 RGP10J-E3/54 1N4007GPE-E3/91 1N4007GPE-E3/54 GP10GE-124E3/91 GP10GE-E3/54… download now
2018_PCN-DD-005-Rev0.pdf 1/2 Product Group: Diodes Division / March 19 , 201 8 / PCN -DD -005 -201 8 Rev. 0 Additional Manufacturing Location for High Voltage 1.5KE TransZorb ® TVS Products DESCRIPTION OF CHANGE : Vishay Diodes Division would like to announce additional manufacturing site in Vishay Semiconductor Shanghai (VSS) in China for high voltage 1 .5KE type 250V to 540V commercial grade products . VSS has the experience on manufacturing 1.5KE 220V for over 5 years . The assembly raw materials, process flows & controls used in VSS manufac turing site are the same as those used in the current VGST production. There is no change in form, fit and functions of the devices in customer applications. The change of the label size of inner reel/box is summarized below: CLASSIFICATION OF CHANGE: Production line consolidation REASON FOR CHANGE: Production line consolidation EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: No change in quality and reliability performance PRODUCT CATEGORY: TransZorb ® TVS… download now
2018_PCN-DD-004-Rev0.pdf Product Group: Diodes Division / March 16, 2018 / PCN -DD -004-201 8 Rev. 0 1/1 Additional 8inch wafer for 100V TMBS in TO -220 Package DESCRIPTION OF CHANGE : In additional to the existing in -house 6inch wafer source, Vishay Diodes Division would like to introduce an additional 8inch wafer source from outs ourced foundry in Taiwan for 100V TMBS in wire bond TO -220 package d products . There will be no change in form, fit or function of final products. CLASSIFICATION OF CHANGE: Wafer Diameter/Location . REASON FOR CHANGE: Capacity expansion for improving delivery support. EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: The re will be no effect on quality & reliability performance. PRODUCT CATEGORY: Rectifiers PART NUMBERS/SERIES/FAMILI ES AFFECTED: Involved P/N list are listed in below table. V30100S -E3/4W V40100C -E3/4W V60100C -E3/4W V30100S -M3/4W V40100C -M3/4W V60100C -M3/4W Note: Upon this PCN approval, all future these P/Ns will be assembled with either the existing… download now
2018_PCN-DD-002-Rev0.pdf Additional a ssembly site for TO -220F ull P AK package DESCRIPTION OF CHANGE: In order t o meet increasing demand of Rectifiers , Vishay Diodes Division is introducing an additional assembly line at a new subcontractor in China for commercial TO -220F ullPAK Part Numbers . The n ew subcontractor ha s received international quality system and environmental compliance certification ISO9001 and ISO14001. Bill of materials is shown in annex 2 while Package Outline Dimension s will be consolidated as illustrated in annex 3. UL certificat ion (File E78996) update for new assembly site is pending. Taking the chance of this capacity expansion, product nomenclature will be harmonized: Vishay Diodes Division will discontinue the Part Numbers with PBF suffix and keep active the Halogen -free version only ( -M3 / -N3 suffix). CLASSIFICATION OF CHANGE: Asse mbly Site REASON FOR CHANGE: Capacity expansion for improving delivery support EXPECTED INFLUENCE ON QU ALITY/RELIABILITY/PERFORMANCE: There… download now
2018_PCN-DD-001-Rev0.pdf Additional a ssembly site for TO -263AB ( D 2PAK ), TO -262 AA and TO -220 packages DESCRIPTION OF CHANGE: In order t o meet increasing demand of Rectifiers , Vishay Diodes Division is introducing an additional assembly line at a new subcontractor in China for commercial TO -263AB (D 2PAK) , TO -262 AA and TO -220 Part Numbers . The n ew subcontractor ha s received international quality system and environmental compliance certification ISO9001 , ISO14001 and TS16949 . Bill of Materials is shown in an nex 2 while Package Outline Dime nsion s will be consolidated as illustrated in annex 3. D2PAK’s Tape & Reel dimensions will remain conform to EIA -481C specification. Taking the chance of this capacity expansion, product nomenclature will be harmonized : Vishay Diodes Division will discontinue the Part Numbers with PBF suffix and keep active the Halogen free version only ( -M3 suffix). Moreover V ishay Diodes Division will also release the AEC Q -101 qualifi ed co rresponding material on… download now
2018_PCN-DBR-001-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 - 2143 U.S.A. Phone (610) 644 - 1300 Fax (610) 296 - 0657 www.vishay.com O N E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Discontinuation of Resistance Value Marking for Standard CRCW e3 lead-free RoHS compliant Thick Film Resistors 0603 – 2512 size DESCRIPTION OF CHANGE: Discontinuation of resistance value marking f or Standard CRCW Thick Film Resistors 0603 – 2512 size. CLASSIFICATION OF CHANGE: Minor REASON FOR CHANGE: Optimization of production process. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: None PRODUCT CATEGORY: Resistors , Discrete PART NUMBERS/SERIES/FAMILIES AFFECTED: See appendix A REPLACEMENTS: N/A. Products remain available under the same part number. VISHAY BRAND(s): Vishay TIME SCHEDULE: Last Time Buy Date: n/a Last Time Shipment Date (with marking): September… download now
2018_PCN-CN-C181001.pdf Multilayer Ceramic Capacitors No.15 T-750C WALSIN TECHNOLOGY CORPORATION C h a n g e N o t i f i c a t i o n CN No.: CN-C181001 Material Specification Process ▓ ▓ ▓ ▓ Others Subject : End of Life Notice for Capacitor Arrays MLCC produ ct. (Y4C2/Y4C3 & MY Series) Reasons : In order to maximize our MLCC production efficiency and follow the market application trend, we decide to phase out the C-Arrays MLCC (Y4C2/Y4C3 & MY Series) products. Contents: Phase out product range: Series Dielectric Size Capacitance Rated voltage Capacitor Arrays (Y4C2/Y4C3 series) NP0 0508 (4x0402), 0612 (4x0603) 10pF~470pF 25V, 50V,100V X7R 0508 (4x0402), 0612 (4x0603) 150pF~0.1 μF 10V, 16V, 25V, 50V Y5V 0612 (4x0603) 0.01 μF~0.1 μF 16V,25V, 50V Automotive Capacitor Arrays Qualified AEC-Q200 (MY Series) NP0 0508 (4x0402), 0612 (4x0603) 10pF~470pF 25V, 50V,100V X7R 0508 (4x0402), 0612 (4x0603) 150pF~0.1 μF 10V, 16V, 25V, 50V Description : NA Effective Date: Apr 29, 2019 Prepared by : CT Chuan g/FAE… download now
2018_PCN-CC-002-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters: 63 Lancaster Avenue, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E OF TH E W OR LD ’S L AR GE S T M AN U F AC TU R E R S O F D IS C R E T E S E M IC ON D U C TOR S AN D P AS S IV E C OM P ON E N T S Product Group : Vis hay Ceramic Capacitors / November 09 , 201 8 / PCN -CC -00 2-201 8 Rev 0 Improvement of Ceramic Dielectric for 615R Series DESCRIPTION OF CHANGE: In line with our commitment for continuous improvement we changed the ceramic dielectric for components build up with T3M (N4700) to S3L (N3300). This ceramic dielectric is RoHS -compliant with exemption 7(C) -II. There is no discontinuation of any other ceramic dielectric of 615R series . The marking and labeling will be adjusted accordingly from T3M to S3L . Body size, maximum thickness, lead spacing, etc. remain unchanged. CLASSIFICATION OF CHANGE: Form, Fit, Function / Marking / Labeling REASON FOR CHANGE: Improvement on… download now
2018_PCN-CC-001-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters: 63 Lancaster Avenue, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E OF TH E W OR LD ’S L AR GE S T M AN U F AC TU R E R S O F D IS C R E T E S E M IC ON D U C TOR S AN D P AS S IV E C OM P ON E N T S Product Group : Vis hay Ceramic Capacitors / April 25 , 201 8 / PCN -CC -00 1-201 8 Rev 0 Introduction of l aser marking for Vishay Cera -Mite DESCRIPTION OF CHANGE: In line with our commitment for continuous improvement we additionally introduce laser m arking along with a modified marking including date code and lot number for Vishay Cera -Mite components. Both marking technologies , existing tampon -print as well as new laser marking, will be used in parallel. The existing tampon -print marking will show neither a date - code nor a lot number. During introdu ction period, deliveries of aff ected products with mixed marking method are possible. The labeling will remain unchanged. There is… download now
2018_PCN-CabTite-Weidmüller.pdf download now
2018_PCN-CabTite-Weidmüller.pdf download now
2018_PCN-CabTite-Weidmueller.pdf download now
2018_PCN-AM11DG-Discontinuation.pdf August 27, 2018 Introduction of New Antenna and Discontinuation of Older Antenna We thank you very much for your usage of our electronic components and would also like to especially thank you for your usage of our antennas. We introduced our AM03DP-ST01 several years ago and are discontinuing our AM03DG-ST01, so we need you to update to using this new part. Old: AM11DG-ST01 New: AM11DP-ST01 Major differences between the two series: (1) Electrode plating on the DP now Sn/Ni. (2) There’s a blue mark on the back of the antenna (as shown on the right) (3) Environmental performance and virtually the same Improvements in DP vs. old DG: By using this plating process on the antenna: (1) Doesn’t discolor over time (the DG would start to turn brown) (2) Safe shelf life now 1 year vs. the old DG’s 3 months (3) Improved solder wettability and heat endurance. The DG version will be discontinued by September 2019 so we ask you to approve our new DP part as soon as possible. The last-time order… download now
2018_PCN-AC-501-Rev0.pdf Product Group: Aluminum Capacitors / Feb. 28 th, 201 8 / PCN -AC -501 -2018 Rev 0, page 1 of 8 Vishay BCcomponents Austria GmbH Ebentalerstrasse 140, A -9020 Klagenfurt / Austria Phone +43 463 3834 –0 www.vishay.com ON E OF TH E W OR LD ’S L AR GE S T M AN U F AC TU R E R S O F D IS C R E T E S E M IC ON D U C TOR S AN D P AS S IV E C OM P ON E N T S Vishay Roederstein Aluminum Capacitors Discontinuance of Snap -In Series EYN and EYH DESCRIPTION OF CHANGE: Termination of Vishay Roederstein series EYN (85 °C) and EYH (105 °C) . Available alternative for bo th series EYN and EYH is Snap -In series 256 PMG -SI. CLASSIFICATION OF CHANGE: Product Termination REASON FOR CHANGE: n/a EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: n/a PRODUCT CATEGORY: Aluminum Electrolytic Snap -In PART NUMBERS/SERIES/FAMILIES AFFECTED: See part number s on page s 2 - 8. In case some part numbers are not listed , this PTN covers in general all part numbers containing the series name EYN or EYH. VISHAY… download now
2018_PCN-AC-001-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644- 1300 Fax (610) 296- 0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Product Group: Aluminum Capacitors /January 11, 2018 /PCN- AC-00 001-2018 Rev 0 MAL219390008E3 change in specification DESCRIPTION OF CHANGE: The electrolyte used in the initial design is no longer available and has been replaced by a newer generation electrolyte. CLASSIFICATION OF CHANGE: Direct Materials (Major) REASON FOR CHANGE : Availability of materials EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE : Limits of ESR and Z at 25° C have been increased. We expect this will have minor impact. PRODUCT CATE GORY: Capacitors PART NUMBERS/SERIES/FAMILIES AFFECTED: MAL219390008E3 VISHAY BRAND(s): Vishay BCcomponents TIME SCHEDULE: Last time ordering date of the old versions: No longer possible Last time shipment date: Not applicable… download now
2018_PCN-Abkuendigung_Ecomal_LP_5_0X_90_180.pdf download now
2018_PCN-20180321-LELON.pdf 立隆電子 (惠 州 )有限公司 LELON ELECTRONICS ( HUI-ZHOU) CO.,LTD Taiyang Industrial Zone, Baihua Town, Huidong County, Huizhou City, Guangdong, China TEL: +86 -752 -8768222 FAX: +86 -752 -8768199 E-mail: service@lelon.com www.lelon.com The Package Dimension and Quantity Changing of Taping Products with 4φ ×5~7mm Length Doc .No: HR-PCN1 801 Date: 20 18/03/21 Revision: 1. 0 Page: 1 Grade: General 第 1 頁，共 1 頁 To whom it may concern ： Since 1 st April 2018, our company will integrate the package of 04 type products, the dimension and quantity of 4 φ×5~7L packing carton will be modified, the details are as follows: Spec Before changing After changing Dimensio n of inner box (length *width * height ) (mm) Quantity of inner box (pcs) Dimension of carton (length *width * height ) (mm) Quantity of carton (pcs) Dimension of inner box (length *width * height ) (mm) Quantity of inner box (pcs) Dimension of carton (length *width * he ight ) (mm) Quantity of carton (Pcs) 4φ×(5~7)L 328*176*44 2k 370*350*245 20k… download now
2018_PCN-1711001-LRS.pdf Product / Process Change Notice (PCN) PCN #: 1711001 Issue Date: 2017-11-07 Product Affected: LRS Series Effective Date: 2018-01-01 □ Product Mark □ Date Code █ Packaging █ Others Contact : All Customer Attachment: █ Yes □ No DESCRIPTION AND PURPOSE OF CHANGE: 1. In order to meet the market requirement, we modify the product dimensions, electrical specifications and Packaging. And increase 0630 type p roduct. 2. Please refer to the details in the table below and in attached datasheet. We hereby announce the change will be effective on Ja nuary 1st, 2018. And we’ll regard as your acceptance if no response to this PCN within the notice period. DETAIL OF CHANGE: Item Before Change After Change Dimensions 1050: 10.5x5.0 1575: 15.2x7.5 0630: 6.35x3.05 1050: 10.5x5.0 1575: 15.2x7.5 Resistance Tolerance F: ± 1% G: ± 2% J: ± 5% F: ± 1% J: ± 5% TCR (PPM/°C) D: ± 50 1: ± 60 W: ± 75 E: ± 100 2: ± 120 … download now
2018_PCN-210318.pdf PCN - Product Change Notification No.: Date: Originator: Subject: Related product: Schedule:PCN-210318 21.03.2018 B. Meier Abolishment - ICM immediately ICM-C68H-SS1A-4109T (LF)(SN)ICM-MA2H-SS52-N11D (LF)(SN)ICM-MA2H-SS52-R21A (LF)(SN) ICM-MA50H-SS52-1141 (LF)(SN) ICM-MA50H-SS52-1151 (LF)(SN) ICM-MA50H-SS52-1171 (LF)(SN) JST Deutschland GmbH Küferstr. 15 D-73650 Winterbach Phone: +49/7181/4007-0 FAX: +49/7181/4007-21 e-mail: customer.service@jst.de www.jst.de register court: Amtsgericht Stuttgart HRB 280991 CEO: Masao Yoshimura Because of special raw material no stable prodcutio n is possible Reason of change: JST Deutschland GmbH Küferstr. 15 D-73650 Winterbach Phone: +49/7181/4007-0 FAX: +49/7181/4007-21 e-mail: customer.service@jst.de www.jst.de register court: Amtsgericht Stuttgart HRB 280991 CEO: Masao Yoshimura download now
2018_PCN-180801-WL Series.pdf Product Change Notice 產品變更通知 PCN #: P1 80801 Product Affected: WL Series Effective Date: November 1, 2018 Contact: All customers Attachment: ▓ Yes □ No Description 1. Description of change: The color dot on the surface of the chip i nductors will be cancelled. We just cancel the color dot on the surface of the parts only, and it does not affect the characteristics of the products. 2. Reason: 2-1. Because of production equipment concern and for the purpose to yield rate improvement, 2-2. To avoid misunderstanding the meaning of color dot, different inductance values have the same color dot. For example, the color dot of 1.6nH and 9.5nH is blue. 3. Expect influence on Quality/Reliability/Performance: No i mpact 4. Series affected: SMD Wire Wound Chip Inductor - WL03 , WL05 , WL08 series 5. Time to change: November 1, 2018 6. Change of datasheet: Yes 7. Samples available: NA Before (With Color Dot) After (Without Color Dot) 1 VIKING TECH CORPORATI ON KAOHSIUNG BRANCH No.248 -3, Sin -Sheng… download now
2018_PCN-18-13.pdf Product Change Notification Doc#: QF -01 6 Rev. A Confidential Page 1 of 2 Date Printed: 11/29/2018 Printed Copies of This Document are Uncontrolled PCN number assigned by Quality PCN # PCN -18-13 PCN Date 30 NOV 2018 UnitedSiC Information Initiator Keith Lau Date 30 NOV 2018 PCN Information Customer Approval Required Notification Only Type of Change: Major Minor Obsolescence Change Affects Form Fit Function Reliability N/A The following applies to all change classifications (Major, Minor, Obsolescence ) Description of Change : Obsolesence of products using 4” (100mm) SiC wafers. Drop in replacement available as identified in Attachment 1. Reason for Change : Introduction of Gen 3, 6” (150mm) wafer diameter products with new part numbers. Affected Products : See Attachment 1. The following only applies to Major and Minor Changes Affected Product Specification (if applicable) : Detail o f potential impact to customer: Qualification Plan or Data (if applicable) : Customer Samples… download now
2018_PCN-016.pdf page 1 of 1 4.14F14 P RODUCT D ISCONTINUATION N OTICE PDN No.: 2018/016 IXYS product type: Type Recommended replacement IXDH35N60B IXXH30N60B3; IXYH30N65C 3 IXDP35N60B IXYP30N65C3 Reason : Low demand Last time order date: 31.03.2019 Last time delivery date: 31.07.2019 Internal Reference: PO_2018-016 In case of any question, please contact Initiator Title/Function Date e-mail Ostmann MP1 11.12.2018 h.ostmann@ixys.de IXYS Semiconductor GmbH Edisonstr. 15 D-68623 Lampertheim Phone: +49-6206-503-xxx Fax: +49-6206-503 -627 Customer response: (please fill in and return by e-mail, fax or mail w ithin 4 weeks) for further questions / information Company: ___________________________________________________ ______ please comment Name & Position: ___________________________________________________ ______ Phone / Fax No.: ___________________________________________________ ______ Comments: ___________________________________________________ ___________________________________________________… download now
2018_PCN-015.pdf page 1 of 1 4.14F14 P RODUCT D ISCONTINUATION N OTICE PDN No.: 2018/015 IXYS product type: Type Recommended replacement IXDP20N60B IXYP20N65B3 Reason : Low demand Last time order date: 31.03.2019 Last time delivery date: 31.07.2019 Internal Reference: PO_2018-015 In case of any question, please contact Initiator Title/Function Date e-mail Ostmann MP1 12.12.2018 h.ostmann@ixys.de IXYS Semiconductor GmbH Edisonstr. 15 D-68623 Lampertheim Phone: +49-6206-503-xxx Fax: +49-6206-503 -627 Customer response: (please fill in and return by e-mail, fax or mail w ithin 4 weeks) for further questions / information Company: ___________________________________________________ ______ please comment Name & Position: ___________________________________________________ ______ Phone / Fax No.: ___________________________________________________ ______ Comments: ___________________________________________________ ___________________________________________________… download now
2018_PCN-013.pdf page 1 of 1 4.14F14 P RODUCT D ISCONTINUATION N OTICE PDN No.: 2018/013 IXYS product type: Type Recommended replacement IXDH30N120 IXDH30N120D1, IXA33IF12 00HB IXDR30N120 IXDR30N120D1, IXA37IF12 00HJ ; ITF48IF1200HR Reason : Low demand Last time order date: 31.03.2019 Last time delivery date: 31.07.2019 Internal Reference: PO_2018-013 In case of any question, please contact Initiator Title/Function Date e-mail Ostmann MP1 11.12.2018 h.ostmann@ixys.de IXYS Semiconductor GmbH Edisonstr. 15 D-68623 Lampertheim Phone: +49-6206-503-xxx Fax: +49-6206-503 -627 Customer response: (please fill in and return by e-mail, fax or mail w ithin 4 weeks) for further questions / information Company: ___________________________________________________ ______ please comment Name & Position: ___________________________________________________ ______ Phone / Fax No.: ___________________________________________________ ______ Comments: ___________________________________________________… download now
2018_Official-letter_ISKRA.pdf download now
2018_MLC-00009-Rev0.pdf Product Group: Vishay Division MLCC/Sept. 5 th 2018 /PTN -MLC -00009 -2018 Rev 0 End of Life for Non Magnetic Series for Epoxy Bonding DESCRIPTION OF CHANGE: Surface Mount Multilayer Ceramic Chip Capacitors with “N” termination are being withdrawn in order to consolidate Product offering. CLASSIFICATION OF CHANGE: Product Termination REASON FOR CHANGE: These MLCCs will be merged to Termination “ E”, VJxxxxxxxxxE xxx : VJ Commercial Series , datasheet : http://www.vishay.com/doc?45199 and inside VJ Hi-Rel Series , datasheet : http://www.vishay.com/doc?45200 EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: None PRODUCT CATEGORY: Capacitors PART NUMBERS/SERIES/FAMILIES AFFECTED: System PN listing attached. VJxxxxxxxxxN… VJ Non -Magnetic Series for Epoxy Bonding : http://www.vishay.com/doc?45128 VJ Hi -Rel Series datasheet : http://www.vishay.com/doc?45200 VISHAY BRAND(s): Vishay TIME SCHEDULE: Last Time Buy Date: March 5 th 2019 Last Time Shipment Date: Sept. 5 th 2019 SAMPLE… download now
2018_EOL-Notification.pdf Transistor Spring Clips End of Life Notification August 1st, 2018 Dear Customer: This notice is to inform you that Laird transistor spring clips will be transitioning through an end o f life process. The last date to submit a purchase o rder for these clips will be February 1st, 2019 with a final ship date of April 1 st, 2019. The primary reason for implementing EOL status is b ecause of limited demand. These items are legacy products that do not compliment our product portfolio, therefore we do not have any alternatives to offer. Part Numbers are listed below: TSC405-ZP TSC506 -NY -A TSC506-ZP TSC209-ZP-A TSC607-ZP TSC903-A TSC506-NY TSC506-ZP/PK10FAR TSC607-NY TSC607-ZP/PK10FAR TSC506-ZP-NT TSC704/PK10-FAR TSC607-ZP-NT TSC903/PK10-FAR TSC209-ZP A11947 TSC704 TSC903 Please check with a Laird representative if you hav e questions, we thank you for your continued business and support. Erin Swanbeck Product Manager, Thermal Materials download now
2018 _PCN-SF-219-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D S L AR G E S T M AN U F A CT U R E R S O F D I S C R E T E S E M I CO N D U C T O R S A N D P A S S I V E C O M P O N E N T Sfernice Wirewound Rheostats RT500, RT230, RT100 & DRTC55CC end of life DESCRIPTION OF CHANGE: Obsolescence. In conformance with our Product Life management procedure, and due to lack of demand, Sfernice Divi sion is transferring RT500, RT230, RT100 & DRT55CC series to an End of Product Life status. There are no recommended replacement products. CLASSIFICATION OF CHANGE: Product Obsolescence REASON FOR CHANGE: Low demand. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANC E: not applicable PRODUCT CATAGORY: Resistors PART NUMBERS/SERIES/FAMILIES AFFECTED: RT500, RT230, RT100 & DRT55CC products. Part Numbers full list below. VISHAY BRAND(s): SFERNICE TIME SCHEDULE: Last Time Buy… download now
2017_PTN-OMV-1011-Rev0.pdf Product Termination Notification Product Group: Opto Modules & Visibles 18-JAN-2018 / PTN OMV-1011-2017 Rev. 0 TITLE: Announcement of Obsolescence for Solid State Relays with low demand. The products listed in this Product Termination Not ice have reached their end of life. DESCRIPTION OF CHANGE: Product Obsolescence CLASSIFICATION OF CHANGE : It is no longer feasible to manufacture these parts due to escalating costs, the declining and very low demand for the products. REASON FOR CHANGE : Solid State Relays PRODUCT CATEGORY: PART NUMBERS / SERIES / FAMILIES AFFECTED: LH1503AAC, LH1503AACTR, LH1503AB LH1513AAC, LH1513AACTR, LH1513AB LH1521BACTR LH1523BAC, LH1523BACTR LH1523BB LH1529AACTR, LH1529GPTR LH1532FP, LH1532FPT LH1533AACTR (Use VOR2141B8 as replacement) LH1540ACD, LH1540ACDTR, LH1540AT-X016 LH1544AAC, LH1544AACTR, LH1544AB (Use VOR2121A8 and VOR2121B8 as replacements) LH1546AD VISHAY SEMICONDUCTORS VISHAY BRAND(s) : TIME SCHEDULE: Annotations about time schedule: Last Time Buy… download now
2017_PCN-X2347.pdf S ubjec t : A pr elim inar y re port on chan ge s of safety appro val ma rks for X2 347 Series capa citors 1. Products to be applied : PC X 2 3 4 7 Series 2. Cause of changing : 20 17 / 12 / 21 - The way of CQC safety approval marks is changed from a marking on the only label to a marking on not only the label but the product above as a new regula tion of CQC headquarters . 3. Effective date : A s of January 02, 201 8 (The period of using together wi th old marking : until stock exha usted) 4. Contents of changing : The CQC safety approval m ar k will be added to the product as described below; Before After Before After Checked Approval download now
2017_PCN-Weidmüller-210217-Rev0.pdf download now
2017_PCN-Weidmüller-210217-Rev0.pdf download now
2017_PCN-Weidmueller-210217-Rev0.pdf download now
2017_PCN-Weidmueller-210217-Rev0+LTB-Update.pdf Order Number Ecomal Nr. Potential Item for Replacement Last time buy 1008020000 ELW1008020000 1409280000 31.12.2023 1201820000 ELW1201820000 1155670000 31.12.2023 1201830000 ELW1201830000 1155820000 31.12.2023 1216480000 ELW1216480000 1526290000 31.12.2023 1287400000 ELW1287400000 1749960000 31.12.2023 1508010000 ELW1508010000 1155030000 31.12.2023 1508060000 ELW1508060000 1146720000 31.12.2023 1508150000 ELW1508150000 on request 31.12.2023 1508160000 ELW1508160000 1146740000 31.12.2023 1508250000 ELW1508250000 on request 31.12.2023 1508260000 ELW1508260000 1146770000 31.12.2023 1508350000 ELW1508350000 on request 31.12.2023 1508360000 ELW1508360000 1146790000 31.12.2023 1508450000 ELW1508450000 on request 31.12.2023 1508460000 ELW1508460000 1146810000 31.12.2023 1508560000 ELW1508560000 1146830000 31.12.2023 1508650000 ELW1508650000 on request 31.12.2023 1508660000 ELW1508660000 1146850000 31.12.2023 1508660026 ELW1508660026 on request 31.12.2023 1508760000 ELW1508760000 1146880000… download now
2017_PCN-SIL-4082017.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355- 2143 U.S.A. Phone (610) 644-1300 Fax (610) 296- 0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONEN T Procedure # Product Group: Vishay Siliconix/ May 25, 2017 /PCN -SIL -408 201 7 End of Life Notification for Vishay Siliconix Analog ICs DESCRIPTION OF CHANGE : Vishay Siliconix announces the end of life of the last ICs manufactured at the fab facility in Santa Clara. Production is terminated with repla cement products listed in the table below. Additionally Vishay Siliconix announces the end of life of all lead-bearing IC parts, and suggest replacement with the Lead- free version of the identical parts. . CLASSIFICATION OF CHANGE: End of life REASON FOR CHANGE: Closure of Fab Facility in Santa Clara, CA EXPECTED INFLUENCE ON PERFORMANCE /QUALITY/RELIABILTY : N/A PRODUCT CATAGORY: ICs PART NUMBERS AFFECTED: **SEE ATTACHED PART LIST** VISHAY… download now
2017_PCN-SF-203-Rev0.pdf Product Group: VISHAY / March 05 th 2018 / PCN -SF -203 -2017 Rev 0 page 1/6 P and PHT series DESCRIPTION OF CHANGE: Revision of the P and PHT series resistance range and tolerances . Basically, the low values of resistance range (≤100 ohms in 0.01% and 0.02%) and high end of resistance values are concerned by this PCN. CLASSIFICATION OF CHANGE: Form, Fit, Fonction REASON FOR CHANGE: some resistance ranges are insufficiently sold , so removed. EXPECTED INFLUENCE ON QUALITY / RELIABILTY / PERFORMANCE : None PRODUCT CATE GORY: Resistors PART NU MBERS/SERIES/FAMILIES AFFECTED: P series VISHAY BRAND(s): VISHAY SFERNICE TIME SCHEDULE PRODUCT IDENTIFICATION: N/A QUALIFICATION DATA: N/A ISSUED BY: Didier Darrouzes / Product Marketing Mgr. Didier.Darrouzes@vishay.com For further information, please contact your regional Vishay office: The Americas Europe Asia VISHAY SPECTROL VISHAY -Division SFERNICE VISHAY Intertechnology 4051 Greystone Drive BP 1159, 199 Bd de la Madeleine Asia Pte. LTD… download now
2017_PCN-OSI-1005-Rev0.pdf Product Change Notification Product Group:Opto Sensors & IRDC 13-AUG-2018 / PCN OSI-1005-2017 Rev. 0 TITLE: VSMY2850(G/RG) / VSMY2853(G/RG/SL): Change in Chip A new chip generation will be introduced in VSMY285 * dome lens products. It has an approximately 20% increased radiant intensit y, while the forward voltage is slightly reduced. This allows for an overall reduction in power consumption. A detailed comparison of the performance is shown i n the attached file, named "PCN OSI-1005-2017 - cha nge description.pdf". DESCRIPTION OF CHANGE : Direct Materials (Major) CLASSIFICATION OF CHANGE : Introduction of new chip generation with improved e lectro-optical performance. REASON FOR CHANGE : No influence on quality and reliability expected. Performance increase with about 20% higher radiant intensity and slightly lower forward voltage. EXPECTED INFLUENCE ON QUALITY RELIABILITY / PERFORMANCE: Infrared Emitters PRODUCT CATEGORY : PART NUMBERS / SERIES / FAMILIES AFFECTED: VSMY2850G… download now
2017_PCN-OSI-985-Rev0.pdf Customer Distribution & Collection OSI-985-2017 Rev. 0 (DFP Type: PCN-ECN) Create an email: PCN Form Distribution Lists Documents Product Change Notification Product Group:Opto Sensors & IRDC DISTRIBUTION since 14-DEC-2017 / PCN OSI-985-2017 Rev. 0 TITLE: VSMY2940(G/RG) / VSMY2943(G/RG/SL): Change in Chip A new chip generation will be introduced in VSMY294* dome lens products. It has an approximately 20% increased radiant intensity, while the forward voltage is slightly reduced. This allows for an overall reduction in power consumption. A detailed comparison of the performance is shown in the attached file, named "PCN OSI-985-2017 - change description.pdf". DESCRIPTION OF CHANGE: Direct Materials (Major) CLASSIFICATION OF CHANGE: Introduction of new chip generation with improved electro-optical performance. REASON FOR CHANGE: No influence on quality and reliability expected. Performance increase with about 20% higher radiant intensity and slightly lower forward voltage. EXPECTED… download now
2017_PCN-OMV-1008-Rev0.pdf DESCRIPTION OF CHANGE: CLASSIFICATION OF CHANGE: REASON FOR CHANGE: EXPECTED INFLUENCE ON QUALITY RELIABILITY / PERFORMANCE: PRODUCT CATEGORY: VISHAY BRAND(s): SAMPLES AVAILABLE BEGINNING: PRODUCT IDENTIFICATION: Product Change Notification Product Group: Opto Modules & Visibles 14-DEC-2017 / PCN OMV-1008-2017 Rev. 0 TITLE: Construction change for LH series Solid State Relays With this change, Vishay announces a change of cons truction of the part. This change facilitates the manufacture of these pr oducts on Vishay's newer automated production lines . This announcement encompasses several improvements. Package: The automated production lines utilize mol d compounds that are environmental friendly and are currently in production. In the case of the DIP-6 p arts, the package length will be shorter to accommo date end to end stacking on a PCB. Construction: The automated production lines uses t he industry standard Hybrid consisting of an emitter, Photovoltaic stack and two MOSFETS. The… download now
2017_PCN-OMV-993-Rev0.pdf Product Change Notification Product Group:Opto Modules & Visibles 24-JAN-2019 / PCN OMV-993-2017 Rev. 0 TITLE: Change of Phototransistor chip The Phototransistor chip is being changed in the H1 1A1, H11AA,IL250, IL25x, ILD620, ILD621, ILQ620, and ILQ621 product s eries due to the obsolescence of the existing die. (Please see the detailed list of products impacted below) DESCRIPTION OF CHANGE : Bill of Material (Major) CLASSIFICATION OF CHANGE : This change was brought about by the obsolescence a nnouncement of the current supplier of the detector chips used in thes e parts. REASON FOR CHANGE : There is no change in either the package constructi on or the material used in the manufacturing of the package. Only the die are changing. The performance of the redesigned products will mee t the existing product specifications EXPECTED INFLUENCE ON QUALITY RELIABILITY / PERFORMANCE: Optocouplers, Isolators PRODUCT CATEGORY : PART NUMBERS / SERIES / FAMILIES AFFECTED: This change only applies… download now
2017_PCN-OMV-952-Rev0.pdf Product Termination Notification Product Group: Opto Modules & Visibles 15-FEB-2017 / PTN OMV-952-2017 Rev. 0 TITLE: End of life of VSOP5....series Vishay today is announcing the discontinuation of V SOP58436 and VSOP58438 IR receiver IC in 2mm x 2mm DFN package w ithout photodiode. Recommended replacements are enclosed. We ask the c ustomer to test the functionality of the replacement parts in their application. DESCRIPTION OF CHANGE : Product Obsolescence CLASSIFICATION OF CHANGE : Consolidation of the Portfolio. REASON FOR CHANGE : IR Receivers PRODUCT CATEGORY : PART NUMBERS / SERIES / FAMILIES AFFECTED: VSOP5....series VISHAY SEMICONDUCTORS VISHAY BRAND(s) : TIME SCHEDULE: Annotations about time schedule: Last Time Buy Date: 11-AUG-2017 Last Time Shipment Date: 16-FEB-2018 SAMPLES AVAILABLE BEGINNING : 12-FEB-2017 We need samples of replacement parts for evaluation : Yes No If Yes return this form to contact information belo w. This PCN is considered approved, without further… download now
2017_PCN-FC-002-Rev0.pdf 2nd Manufacturing Location for MKT1820 DESCRIPTION OF CHANGE: Vishay Film Capacitors wants to announce that we are able to produce for the future the automotive film capacitor MKT1820 also in Loni, India. This 2 nd source will bring us an high grade of flexibility and additional production capacity. CLASSIFICATION OF CHANGE : Assemble side (2 nd location) REASON FOR CHANGE: 2 nd source installed; more flexibility EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMANCE: N one PRODUCT CATEGORY: Film Capacitors PART NUMBERS/SERIES/FAMILIES AFFECTED: MKT1820 standard, except MKT1820547065V and MKT1820622065 VISHAY BRAND(s): Roederstein TIME SCHEDULE: St art Shipment date: 1 st of MAY 2018 Last Time Buy Date: n/a Last Time Shipment Date: n/a SAMPLE AVAILABILITY : yes PRODUCT IDENTIFICATION: by date code QUAL IFICAT ION DAT A: yes, available ISSUED BY: Wolfgang Rettlinger ; email: wolfgang.rettlingerl@vishay.com Tel.: + 49 (0)871 86 -2374 For further information, please contact your regional… download now
2017_PCN-DD-012-Rev0.pdf Vi sh ay I n ter tech n o l o g y, I n c. C o r p o r ate H ead q u ar ter s 63 Linc oln H ighway , Malv ern, PA 19355 -2143 U . S. A. Ph o n e (610) 644 -1300 F ax (610) 296 -0657 www. vi sh ay. co m ON E OF TH E W OR L D ’ S L AR GE S T M AN U F AC TU R ER S OF D I SC R E TE S E MI C ON D U C T OR S AN D P AS SI V E C O MPON EN T Product Replacement for BZG03, BZG04, BZG05 Series SMA (DO -214AC) Zener D iodes DESCRIPTION OF CHANGE: Because of molding compound discontinuation at vendor , Vishay Diodes Division will discontinue the current SMA Zener products and substitute with same products in halogen -free mold compound version, qualified and produced in our same location in Budapest. The replacement product has no change in form, fit or function of the device nor impact on performance, quality and reliability . CLASSIFICATION OF CHANGE: Molding / Coating REASON FOR CHANGE: Ma terial discontinuation at vendor PRODUCT CATEGORY: Zener Diodes PART NUMBERS/SERIES/FAMILIES AFFECTED: Ex… download now
2017_PCN-DD-011-Rev0.pdf 1/3 Product Group: Diodes Divisio n / Sep tem ber 22, 201 7 / PCN -DD-011 -20 17 Rev. 0 Addition of Assembly Site for Axial STD/FER/ S chottky Rectifiers DESCRIPTION OF CHANGE : Vishay Diodes Division would like to introduce an additional assembly location at a subcontractor in China for Axial STD/FER/Schottky rectifiers . The subcontractor lead is with additional ring structure. In addition , the chip thickness of Schottky products will be consolidated to 12mil from original 11mil and 14mil respectively. Table 1: Schottky chip thickness consolidation Package Products Current Chip thickness(mil) Conso lidated Chip Thickness(mil) DO -201AD 1N5820~1N5822 14 12 SB320~SB360 14 12 SB520~SB560 14 12 SB3H90~SB3H100 11 12 SB5H90~SB5H100 11 12 DO -204AL 1N5817~1N5819 14 12 (DO -41) SB110~SB160 14 12 SB2 20S~SB260S 14 12 SB1H90~SB1H100 11 12 CLASSIFICATION OF CHANGE: Assembly Site . Wafer/Chip/Pellet Process/Structure – Chip thickness . Assembly Process/Structure – Lead design . REASON FOR… download now
2017_PCN-AC-00002-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355- 2143 U.S.A. Phone (610) 644- 1300 Fax (610) 296- 0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Product Group: Aluminum Capacitors /December 7, 2017/ PCN-AC -0 000 2-2017 Rev 0 Change in MPQ for clamps 65 mm, 75 mm and 90 mm DESCRIPTION OF CHANGE: Clamps are used to mount screw terminal capacitors according to below table . The change in minimum packing quantity, MPQ, will ensure that the number of clamps per box is a multiple of the MPQ of the corresponding screw terminal capacitors. P/N Description MPQ old MPQ new MAL804324061E3 CLAMP ST Ø65 50 96 MAL804323321E3 CLAMP ST Ø76 100 108 MAL804324921E3 CLAMP ST Ø90 50 80 CLASSIFICATION OF CHANGE: Labeling/Packing REASON FOR CHANGE : Alignment of MPQs for accessories with those of the products requiring them. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE : There will be no effect… download now
2017_CTH-Taping-Notice.pdf December 12 th, 2017 Attn: Mitsubishi Material Corporation Electronic Materials & Components Company Electronic Devices Division , Sales Department General Manager Kazuhide Kokubu All Chip Thermistor Taping Moving to Thailand Greetings and thank you for your continued business — we particularly would like to thank yo u for buying our thermistors . This letter is to confirm Mitsubishi Materials will be moving its taping process . 1. Affected Series : Chip thermistor T*03, T*05, T*10, T*11, T*20 series. 2. Change We currently tape our chip thermistors in our Japanese Ceramic s Plant and in Thailand. We start moving remaining Japanese taping from March 2018 to: MMC Electronics (Thailand) Ltd. 129/2 Moo 17, Bangplee Industrial Esta te, Bangna -Trad., Bangsaothong, Bangsaothong District Samutprakarn 10540 , Thailand We will assume you have approved this if we haven ’t received notification from you otherwise by December 31, 2017. Thank you for your understanding and cooper ation with this… download now
2016_PCN_140145452.pdf download now
2016_PCN-SIL-012-Rev0.pdf Product Group: Vishay Siliconix/May 13 , 2016/PCN SIL -0122016 Additional Commercial Power MOSFE T Manufacturing Capacity Expansion DESCRIPTION OF CHANGE: To meet increasing demand for Power MOSFET products, Vishay Siliconix has expanded assembly and test capacity on commercial Low Voltage MOSFET s in Vishay’s DPAK (TO -252) package. ASE Weihai has provided world -class total manufacturing services since Q1 2008, and has received international quality systems and environmental compliance certifications TS61949, ISO9001, ISO14001 and OSHAS 18001. CLASSIFICATION of CHANGE : Additional assembly and test capacity EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: There will be no a ffe ct on the quality, reliability, or performance . There will be no changes in minimum and maximum values on the data sheets. PRODUC T CATAGORY: Commercial Low Voltage Power MOSFETs PART NUMBERS/SERIES/FAMILIES AFFECTED: See page 2 of this PCN. VISHAY BRAND(s): Vishay Siliconix TIME SCHEDULE: Shipments of… download now
2016_PCN-Lelon-130903-04-Rev1.0.pdf download now
2016_PCN-DI-272-2016-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N TS Procedure # IHHP-1008AZ and IHHP-1008AB-01 Series Product Changes and Obsolescence DESCRIPTION OF CHANGE: The Vishay IHHP-1008 series is undergoing data shee t changes and some values are becoming obsolete. Last time buy t imeframe is provided. CLASSIFICATION OF CHANGE: Product Obsolescence REASON FOR CHANGE: The current IHHP-1008AZ-01 and IHHP-1008AB-01 are n o longer available and a new source will be used to supply these parts . EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANC E: N/A PRODUCT CATAGORY: Inductors PART NUMBERS/SERIES/FAMILIES AFFECTED: IHHP1008AZERR47M01 – data changes IHHP1008ABERR47M0 1 – data changes IHHP1008AZER1R0M01 – data changes IHHP1008ABER1R0M0 1 –… download now
2016_PCN-DD-006-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Li ncoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Product Obsolescence DESCRIPTION OF CHANGE: Discontinuation of some part numbers in power module CLASSIFICATION OF CHANGE: Product Obsolescence REASON FOR CHANGE: Product rationalization EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: N/A PRODUCT CAT EGORY: Modules PART NUMBERS/SERIES/FAMILIES AFFECTED: Package Part number Alternate proposed part number IAP VS -GA200HS60S1 n/a VS -GA200HS60S1PBF n/a VS -GA100TS60SFPBF VS -GP100TS60SFPBF VS -GA100TS60SF VS -GP100TS60SFPBF VS -GB10 0TP120U n/a VS -GB75LP120N n/a VS -GT100TP120N n/a VS -GT75LP120N n/a VS -GT75NP120N n/a DIAP VS -GT400TH120N n/a VS -GT400TH120U n/a Emipak2 VS -EMF050J60U VS -ETF075Y60U VS -EMG050J 60N n/a… download now
2016_PCN-140145452.pdf download now
2014_PTN-SF-FL146-2014-Sfernice.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com ON E O F T H E W O R L D S L AR G E S T M AN U F A CT U R E R S O F D I S C R E T E S E M I CO N D U C T O R S A N D P A S S I V E C O M P O N E N T Sfernice Metal Film NKx, NYx, NPx, NTx & SLx end of life DESCRIPTION OF CHANGE: End of life. Sfernice Division is making NKx, NYx, NPx, NTx & SLx obsolete due to lack of demand. CLASSIFICATION OF CHANGE: Product Obsolescence REASON FOR CHANGE: Low demand. Potential cross references: *Vishay Sfernice CECC qualified RCMx, see http://www.vishay.com/docs/52006/rcmm.pdf , http://www.vishay.com/docs/52007/rcms.pdf & http://www.vishay.com/docs/52009/rcma.pdf *Vishay Draloric/Beyschlag CECC qualified MBx/SMA, see http://www.vishay.com/docs/28766/28766.pdf & http://www.vishay.com/docs/28767/28767.pdf EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANC E: not applicable PRODUCT CATAGORY:… download now
2014_PCN-SIL-005-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355 -2143 U.S.A. Phone (610) 644 -1300 Fax (610) 296 -0657 www.vishay.com ON E O F T H E W O R L D ’ S L A R G E S T M A N U F A C T U R E R S O F D I S C R E T E S E M I C O N D U C T O R S A N D P A S S I V E C O M P O N E N T Procedure # Product Group: Vishay Siliconix/ March 7, 2014/ PCN -SIL -0052014 Rev 0 Additional Wafer Fabrication Capacity for Vishay Siliconix ICs DESCRIPTION OF CHANGE: To meet increasing demand, Vishay Siliconix has expanded capacity for additional IC wafer fabrication to foundry partner Tower Jazz in Mi gdal Haemek, Israel. Established in 1993 , Tower Jazz is a worldwide supplier for foundry services of wafer manufacturing. They offer process technologies down to 0.1 3 microns. TowerJazz has achieved ISO 14001 :2004, SI ISO27001:2007, OHSAS18001:2007, ISO9001:2008 and TS 1649 :2009 certifications . CLASSIFICATION OF CHANGE: Wafer Site REASON FOR CHANGE: Additional Wafer… download now
2011_PCN-SIL-048-RevA.pdf Product Group: Vishay Siliconix/ December 19, 2011/ PCN-SIL-0482011 Rev A Vishay Siliconix Commercial MOSFET Material Set Standardization DESCRIPTION OF CHANGE: In accordance to our continuing quality improvement plans, Vishay Siliconix announces the material set consolidation for se veral commercial Low Voltage MOSFET products. By standardizing our material sets we will streamline our manufacturing processes and improve production performance. There are 2 sets of affected parts list in this PCN. The first set is on page 2 in Table I includes those parts which will be converted to a standardized Halogen-free material set with regards to mold compound and epoxy die attach. The parts list on page 3 in Table II includes thos e products which will be converted to copper wire as well as a standardized Halogen-free material set. CLASSIFICATION OF CHANGE: Material set conversion REASON FOR CHANGE: Part of continued quality improvement program. EXPECTED INFLUENCE ON… download now
2011_PCN-SF-FL-109-Rev0.pdf SFERNICE TRIMMERS: New T&R Packaging Color DESCRIPTION OF CHANGE: Packaging change. Change to ESD proof black material. Extension to all SMD Trimmers of use of conductive embossed c arrier helping to protect customer’s electrostatic-sensitive elect rical and electronic Devices. See pictures examples below. Product families in volved: TS5 / TS53 / TS6 / TS63 / TSM4 CLASSIFICATION OF CHANGE: Packaging REASON FOR CHANGE: Quality Improvement EXPECTED INFLUENCE ON QUALITY/RELIABILITY/PERFORMAN CE: None. PRODUCT CATEGORY: Trimmers PART NUMBERS/SERIES/FAMILIES AFFECTED: Models listed below. Full P/Ns list at the end of document TS5 *R10 TS53 *R10 TS6*R10 TS63 *R10 TSM4 *R05 VISHAY BRAND(s): Vishay Sfernice TIME SCHEDULE: Applicable Date: Week 50/2011 and after Last Time Buy Date : n/a Last Time Shipment Date : n/a SAMPLE AVAILABILITY : Not applicable PRODUCT IDENTIFICATION : Product Marking QUALIFICATION DATA : n/a This PCN is considered approved, without further no tification, unless we… download now
2011_PCN-OMV-528-Rev0.pdf Product Change Notification Product Group: / 16-JUN-2011 / PCN-OMV-528-2011 Rev0 Production Transfer of selected 4 pin & 6 pin Couplers with transistor output Capacity Expansion Detector die wafer size change from 4” to 6” Introduction of an alternate detector die Introduction of Eco firendly ´Green´ molding coumpounds. DESCRIPTION OF CHANGE: Assembly Site / Direct Materials (Major) / Marking / Molding/Coating / Shipping Packing Materials / Test Site / Wafer/Chip/Pellet Layout/Design CLASSIFICATION OF CHANGE: Details: Capacity expansion Transferring assmbly & test of selected 4 pin & 6 pin couplers with transistor output from Malaysia to a Contract Manufacturer in China will free up production capacity in Malaysian factory and shorten leadtimes. REASON FOR CHANGE: Product characterization shows no change in performance. Products from the Contract Manufacturer have passed all qualifictaion tests. Necessary steps have been taken to ensure continued supply of products. EXPECTED INFLUENCE… download now
2011_PCN-DBR-014-Rev0.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 1 9355-2143 U.S.A. Phone (610) 644- 1300 Fax (610) 296 -0657 www.vishay.com ONE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Introduction of Intermediate Cu/Ni-Termination-Layers for Th in Film MINI-MELF Resistors SMM0204 DESCRIPTION OF CHANGE: Termination design of SMM0204 will be changed from layer sequence “NiP / Matt Tin” to “NiP / Cu / Ni / Matt Tin”. CLASSIFICATION OF C HANGE: Termination Design REASON FOR CHANGE: The termination design for Draloric / Beyschlag MINI -MELF resistors will be harmonized by using the same layer sequence for SMM0204 as for MMA 0204: NiP / Cu / Ni / Matt Tin. Intermediate layers of Cu and Ni improve the solder joint robustness against thermal cycling of SMM0204. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: Improvement of solder joint Robustness against t hermal cycling PRODUCT CAT EGORY: Resistors, Discrete PART… download now
2010_PCN-TC-006-Rev0.pdf CONVERSION TO “GREEN” ENCAPSULATION MATERIAL DESCRIPTION OF CHANGE: Introduction of Halogen Free encapsulation material. CLASSIFICATION OF CHANGE: Material change. REASON FOR CHANGE: In order to meet growing demand for Green products, Vishay will convert from regular molding material containing Halogen flame retardant additive to Halogen free (green). This green material has same chemical formulation except: Brominated resin was removed. Form, Fit and Function is identical to the currently used one. With this change Tantalum lead-free capacitors related to a.m. series will become fully RoHS compliant and green. Production will be converted to green products gradually, on case-by- case basis, starting from Q3 2010. After the start of production with the green compound, Vishay reserves the right to ship either part, till stock depleting. EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: There will be no effect on product quality, reliability or performance. All published performance… download now
2008_PCN-SIL-0432008-Rev1.pdf Vishay Intertechnology, Inc. Corporate Headquarters 63 Lincoln Highway, Malvern, PA 19355-2143 U.S.A. Phone (610) 644-1300 Fax (610) 296-0657 www.vishay.com O NE OF THE WORLD’S LARGEST MANUFACTURERS OF DISCRETE SEMICONDUCTORS AND PASSIVE COMPONENT Procedure # Product Group: Vishay Siliconix/ July 8, 2008/ PCN- SIL-0432008 Rev 1 Obsolescence of Commercial Power Mosfets Rev 1 provides additional recommended replacement part numbers DESCRIPTION OF CHANGE: Vishay Siliconix is planning the obsolescence of several commercial Low Voltage Power MOSFET products. In most cases we already offer existing parts as direct or similar replacements . CLASSIFICATION OF CHANGE: Product Obsolescence REASON FOR CHANGE: Migration to newer process technologies EXPECTED INFLUENCE ON QUALITY/RELIABILTY/PERFORMANCE: None PRODUCT CATAGORY: Power MOSFET only PART NUMBERS/SERIES/FAMILIES AFFECTED: Refer to list of part numbers included with this PCN VISHAY BRAND(s): Vishay-Siliconix TIME SCHEDULE: Last time buy… download now